1 files changed, 102 insertions, 0 deletions
diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.h b/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.h
new file mode 100755
index 00000000..8869d5dc
--- /dev/null
+++ b/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.h
@@ -0,0 +1,102 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+// LED
+#define LED_PORT              GPIOD
+#define LED_PIN               GPIO_PIN_8	// LED1, GREEN
+// #define LED_PIN               GPIO_PIN_9	// LED2, ORANGE
+// #define LED_PIN               GPIO_PIN_10	// LED3, RED
+// #define LED_PIN               GPIO_PIN_11	// LED4, BLUE
+#define LED_STATE_ON          0
+
+// Button
+#define BUTTON_PORT           GPIOA
+#define BUTTON_PIN            GPIO_PIN_0 // JOY_SEL
+#define BUTTON_STATE_ACTIVE   1
+
+// UART
+#define UART_DEV              USART2
+#define UART_CLK_EN           __HAL_RCC_USART2_CLK_ENABLE
+#define UART_GPIO_PORT        GPIOD
+#define UART_GPIO_AF          GPIO_AF0_USART2
+#define UART_TX_PIN           GPIO_PIN_5
+#define UART_RX_PIN           GPIO_PIN_6
+
+//--------------------------------------------------------------------+
+// RCC Clock
+//--------------------------------------------------------------------+
+static inline void board_stm32f0_clock_init(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+
+  /** Initializes the RCC Oscillators according to the specified parameters
+   * in the RCC_OscInitTypeDef structure.
+   */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48;
+  RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
+  RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6;
+  RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1;
+
+  HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+  /** Initializes the CPU, AHB and APB buses clocks
+   */
+  RCC_ClkInitStruct.ClockType =
+      RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+
+  HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1);
+
+  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB | RCC_PERIPHCLK_USART2;
+  PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1;
+  PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSI48;
+
+  HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit);
+}
+
+static inline void board_vbus_sense_init(void)
+{
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */