diff options
Diffstat (limited to 'tinyusb/hw/bsp')
415 files changed, 0 insertions, 54934 deletions
diff --git a/tinyusb b/tinyusb new file mode 160000 +Subproject f8288be03f28ad7b944e6925f49422dfa39202c diff --git a/tinyusb/hw/bsp/ansi_escape.h b/tinyusb/hw/bsp/ansi_escape.h deleted file mode 100755 index 35342cfe..00000000 --- a/tinyusb/hw/bsp/ansi_escape.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/** \ingroup group_board - * \defgroup group_ansi_esc ANSI Esacpe Code - * @{ */ - -#ifndef _TUSB_ANSI_ESC_CODE_H_ -#define _TUSB_ANSI_ESC_CODE_H_ - - -#ifdef __cplusplus - extern "C" { -#endif - -#define CSI_CODE(seq) "\33[" seq -#define CSI_SGR(x) CSI_CODE(#x) "m" - -//------------- Cursor movement -------------// -/** \defgroup group_ansi_cursor Cursor Movement - * @{ */ -#define ANSI_CURSOR_UP(n) CSI_CODE(#n "A") ///< Move cursor up -#define ANSI_CURSOR_DOWN(n) CSI_CODE(#n "B") ///< Move cursor down -#define ANSI_CURSOR_FORWARD(n) CSI_CODE(#n "C") ///< Move cursor forward -#define ANSI_CURSOR_BACKWARD(n) CSI_CODE(#n "D") ///< Move cursor backward -#define ANSI_CURSOR_LINE_DOWN(n) CSI_CODE(#n "E") ///< Move cursor to the beginning of the line (n) down -#define ANSI_CURSOR_LINE_UP(n) CSI_CODE(#n "F") ///< Move cursor to the beginning of the line (n) up -#define ANSI_CURSOR_POSITION(n, m) CSI_CODE(#n ";" #m "H") ///< Move cursor to position (n, m) -/** @} */ - -//------------- Screen -------------// -/** \defgroup group_ansi_screen Screen Control - * @{ */ -#define ANSI_ERASE_SCREEN(n) CSI_CODE(#n "J") ///< Erase the screen -#define ANSI_ERASE_LINE(n) CSI_CODE(#n "K") ///< Erase the line (n) -#define ANSI_SCROLL_UP(n) CSI_CODE(#n "S") ///< Scroll the whole page up (n) lines -#define ANSI_SCROLL_DOWN(n) CSI_CODE(#n "T") ///< Scroll the whole page down (n) lines -/** @} */ - -//------------- Text Color -------------// -/** \defgroup group_ansi_text Text Color - * @{ */ -#define ANSI_TEXT_BLACK CSI_SGR(30) -#define ANSI_TEXT_RED CSI_SGR(31) -#define ANSI_TEXT_GREEN CSI_SGR(32) -#define ANSI_TEXT_YELLOW CSI_SGR(33) -#define ANSI_TEXT_BLUE CSI_SGR(34) -#define ANSI_TEXT_MAGENTA CSI_SGR(35) -#define ANSI_TEXT_CYAN CSI_SGR(36) -#define ANSI_TEXT_WHITE CSI_SGR(37) -#define ANSI_TEXT_DEFAULT CSI_SGR(39) -/** @} */ - -//------------- Background Color -------------// -/** \defgroup group_ansi_background Background Color - * @{ */ -#define ANSI_BG_BLACK CSI_SGR(40) -#define ANSI_BG_RED CSI_SGR(41) -#define ANSI_BG_GREEN CSI_SGR(42) -#define ANSI_BG_YELLOW CSI_SGR(43) -#define ANSI_BG_BLUE CSI_SGR(44) -#define ANSI_BG_MAGENTA CSI_SGR(45) -#define ANSI_BG_CYAN CSI_SGR(46) -#define ANSI_BG_WHITE CSI_SGR(47) -#define ANSI_BG_DEFAULT CSI_SGR(49) -/** @} */ - -#ifdef __cplusplus - } -#endif - -#endif /* _TUSB_ANSI_ESC_CODE_H_ */ - -/** @} */ diff --git a/tinyusb/hw/bsp/board.c b/tinyusb/hw/bsp/board.c deleted file mode 100755 index 6a26f55b..00000000 --- a/tinyusb/hw/bsp/board.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2018, hathach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#include "board.h" - -#if 0 -#define LED_PHASE_MAX 8 - -static struct -{ - uint32_t phase[LED_PHASE_MAX]; - uint8_t phase_count; - - bool led_state; - uint8_t current_phase; - uint32_t current_ms; -}led_pattern; - -void board_led_pattern(uint32_t const phase_ms[], uint8_t count) -{ - memcpy(led_pattern.phase, phase_ms, 4*count); - led_pattern.phase_count = count; - - // reset with 1st phase is on - led_pattern.current_ms = board_millis(); - led_pattern.current_phase = 0; - led_pattern.led_state = true; - board_led_on(); -} - -void board_led_task(void) -{ - if ( led_pattern.phase_count == 0 ) return; - - uint32_t const duration = led_pattern.phase[led_pattern.current_phase]; - - // return if not enough time - if (board_millis() - led_pattern.current_ms < duration) return; - - led_pattern.led_state = !led_pattern.led_state; - board_led_write(led_pattern.led_state); - - led_pattern.current_ms += duration; - led_pattern.current_phase++; - - if (led_pattern.current_phase == led_pattern.phase_count) - { - led_pattern.current_phase = 0; - led_pattern.led_state = true; - board_led_on(); - } -} -#endif - -//--------------------------------------------------------------------+ -// newlib read()/write() retarget -//--------------------------------------------------------------------+ - -#if defined(__MSP430__) || defined(__RX__) - #define sys_write write - #define sys_read read -#else - #define sys_write _write - #define sys_read _read -#endif - -#if defined(LOGGER_RTT) -// Logging with RTT - -// If using SES IDE, use the Syscalls/SEGGER_RTT_Syscalls_SES.c instead -#if !(defined __SES_ARM) && !(defined __SES_RISCV) && !(defined __CROSSWORKS_ARM) -#include "SEGGER_RTT.h" - -TU_ATTR_USED int sys_write (int fhdl, const void *buf, size_t count) -{ - (void) fhdl; - SEGGER_RTT_Write(0, (char*) buf, (int) count); - return count; -} - -TU_ATTR_USED int sys_read (int fhdl, char *buf, size_t count) -{ - (void) fhdl; - return SEGGER_RTT_Read(0, buf, count); -} -#endif - -#elif defined(LOGGER_SWO) -// Logging with SWO for ARM Cortex - -#include "board_mcu.h" - -TU_ATTR_USED int sys_write (int fhdl, const void *buf, size_t count) -{ - (void) fhdl; - uint8_t const* buf8 = (uint8_t const*) buf; - for(size_t i=0; i<count; i++) - { - ITM_SendChar(buf8[i]); - } - return count; -} - -TU_ATTR_USED int sys_read (int fhdl, char *buf, size_t count) -{ - (void) fhdl; - return 0; -} - -#else - -// Default logging with on-board UART -TU_ATTR_USED int sys_write (int fhdl, const void *buf, size_t count) -{ - (void) fhdl; - return board_uart_write(buf, count); -} - -TU_ATTR_USED int sys_read (int fhdl, char *buf, size_t count) -{ - (void) fhdl; - return board_uart_read((uint8_t*) buf, count); -} - -#endif diff --git a/tinyusb/hw/bsp/board.h b/tinyusb/hw/bsp/board.h deleted file mode 100755 index 782e0939..00000000 --- a/tinyusb/hw/bsp/board.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/** \ingroup group_demo - * \defgroup group_board Boards Abstraction Layer - * @{ */ - -#ifndef _BSP_BOARD_H_ -#define _BSP_BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#include <stdint.h> -#include <stdbool.h> - -#include "ansi_escape.h" -#include "tusb.h" - -#define CFG_BOARD_UART_BAUDRATE 115200 - -//--------------------------------------------------------------------+ -// Board Porting API -// For simplicity, only one LED and one Button are used -//--------------------------------------------------------------------+ - -// Initialize on-board peripherals : led, button, uart and USB -void board_init(void); - -// Turn LED on or off -void board_led_write(bool state); - -// Control led pattern using phase duration in ms. -// For each phase, LED is toggle then repeated, board_led_task() is required to be called -//void board_led_pattern(uint32_t const phase_ms[], uint8_t count); - -// Get the current state of button -// a '1' means active (pressed), a '0' means inactive. -uint32_t board_button_read(void); - -// Get characters from UART -int board_uart_read(uint8_t* buf, int len); - -// Send characters to UART -int board_uart_write(void const * buf, int len); - -#if CFG_TUSB_OS == OPT_OS_NONE - // Get current milliseconds, must be implemented when no RTOS is used - uint32_t board_millis(void); - -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - static inline uint32_t board_millis(void) - { - return ( ( ((uint64_t) xTaskGetTickCount()) * 1000) / configTICK_RATE_HZ ); - } - -#elif CFG_TUSB_OS == OPT_OS_MYNEWT - static inline uint32_t board_millis(void) - { - return os_time_ticks_to_ms32( os_time_get() ); - } - -#elif CFG_TUSB_OS == OPT_OS_PICO - #include "pico/time.h" - static inline uint32_t board_millis(void) - { - return to_ms_since_boot(get_absolute_time()); - } - -#elif CFG_TUSB_OS == OPT_OS_RTTHREAD - static inline uint32_t board_millis(void) - { - return (((uint64_t)rt_tick_get()) * 1000 / RT_TICK_PER_SECOND); - } - -#else - #error "board_millis() is not implemented for this OS" -#endif - -//--------------------------------------------------------------------+ -// Helper functions -//--------------------------------------------------------------------+ -static inline void board_led_on(void) -{ - board_led_write(true); -} - -static inline void board_led_off(void) -{ - board_led_write(false); -} - -// TODO remove -static inline void board_delay(uint32_t ms) -{ - uint32_t start_ms = board_millis(); - while (board_millis() - start_ms < ms) - { - #if TUSB_OPT_DEVICE_ENABLED - // take chance to run usb background - tud_task(); - #endif - } -} - -static inline int board_uart_getchar(void) -{ - uint8_t c; - return board_uart_read(&c, 1) ? (int) c : (-1); -} - -static inline int board_uart_putchar(uint8_t c) -{ - return board_uart_write(&c, 1); -} - -#ifdef __cplusplus - } -#endif - -#endif /* _BSP_BOARD_H_ */ - -/** @} */ diff --git a/tinyusb/hw/bsp/board_mcu.h b/tinyusb/hw/bsp/board_mcu.h deleted file mode 100755 index 8cc50c80..00000000 --- a/tinyusb/hw/bsp/board_mcu.h +++ /dev/null @@ -1,142 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - - -#ifndef BOARD_MCU_H_ -#define BOARD_MCU_H_ - -#include "tusb_option.h" - -//--------------------------------------------------------------------+ -// Low Level MCU header include. TinyUSB stack and example should be -// platform independent and mostly doens't need to include this file. -// However there are still certain situation where this file is needed: -// - FreeRTOSConfig.h to set up correct clock and NVIC interrupts for ARM Cortex -// - SWO logging for Cortex M with ITM_SendChar() / ITM_ReceiveChar() -//--------------------------------------------------------------------+ - -// Include order follows OPT_MCU_ number -#if CFG_TUSB_MCU == OPT_MCU_LPC11UXX || CFG_TUSB_MCU == OPT_MCU_LPC13XX || \ - CFG_TUSB_MCU == OPT_MCU_LPC15XX || CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || \ - CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC18XX || \ - CFG_TUSB_MCU == OPT_MCU_LPC40XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX - #include "chip.h" - -#elif CFG_TUSB_MCU == OPT_MCU_LPC51UXX || CFG_TUSB_MCU == OPT_MCU_LPC54XXX || \ - CFG_TUSB_MCU == OPT_MCU_LPC55XX || CFG_TUSB_MCU == OPT_MCU_MKL25ZXX || \ - CFG_TUSB_MCU == OPT_MCU_K32L2BXX - #include "fsl_device_registers.h" - -#elif CFG_TUSB_MCU == OPT_MCU_NRF5X - #include "nrf.h" - -#elif CFG_TUSB_MCU == OPT_MCU_SAMD11 || CFG_TUSB_MCU == OPT_MCU_SAMD21 || \ - CFG_TUSB_MCU == OPT_MCU_SAMD51 || CFG_TUSB_MCU == OPT_MCU_SAME5X || \ - CFG_TUSB_MCU == OPT_MCU_SAML22 || CFG_TUSB_MCU == OPT_MCU_SAML21 - #include "sam.h" - -#elif CFG_TUSB_MCU == OPT_MCU_SAMG - #undef LITTLE_ENDIAN // hack to suppress "LITTLE_ENDIAN" redefined - #include "sam.h" - -#elif CFG_TUSB_MCU == OPT_MCU_STM32F0 - #include "stm32f0xx.h" - -#elif CFG_TUSB_MCU == OPT_MCU_STM32F1 - #include "stm32f1xx.h" - -#elif CFG_TUSB_MCU == OPT_MCU_STM32F2 - #include "stm32f2xx.h" - -#elif CFG_TUSB_MCU == OPT_MCU_STM32F3 - #include "stm32f3xx.h" - -#elif CFG_TUSB_MCU == OPT_MCU_STM32F4 - #include "stm32f4xx.h" - -#elif CFG_TUSB_MCU == OPT_MCU_STM32F7 - #include "stm32f7xx.h" - -#elif CFG_TUSB_MCU == OPT_MCU_STM32H7 - #include "stm32h7xx.h" - -#elif CFG_TUSB_MCU == OPT_MCU_STM32L0 - #include "stm32l0xx.h" - -#elif CFG_TUSB_MCU == OPT_MCU_STM32L1 - #include "stm32l1xx.h" - -#elif CFG_TUSB_MCU == OPT_MCU_STM32L4 - #include "stm32l4xx.h" - -#elif CFG_TUSB_MCU == OPT_MCU_CXD56 - // no header needed - -#elif CFG_TUSB_MCU == OPT_MCU_MSP430x5xx - #include "msp430.h" - -#elif CFG_TUSB_MCU == OPT_MCU_VALENTYUSB_EPTRI - // no header needed - -#elif CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX - #include "fsl_device_registers.h" - -#elif CFG_TUSB_MCU == OPT_MCU_NUC120 - #include "NUC100Series.h" - -#elif CFG_TUSB_MCU == OPT_MCU_NUC121 || CFG_TUSB_MCU == OPT_MCU_NUC126 - #include "NuMicro.h" - -#elif CFG_TUSB_MCU == OPT_MCU_NUC505 - #include "NUC505Series.h" - -#elif CFG_TUSB_MCU == OPT_MCU_ESP32S2 - // no header needed - -#elif CFG_TUSB_MCU == OPT_MCU_ESP32S3 - // no header needed - -#elif CFG_TUSB_MCU == OPT_MCU_DA1469X - #include "DA1469xAB.h" - -#elif CFG_TUSB_MCU == OPT_MCU_RP2040 - #include "pico.h" - -#elif CFG_TUSB_MCU == OPT_MCU_EFM32GG || CFG_TUSB_MCU == OPT_MCU_EFM32GG11 || CFG_TUSB_MCU == OPT_MCU_EFM32GG12 - #include "em_device.h" - -#elif CFG_TUSB_MCU == OPT_MCU_RX63X || CFG_TUSB_MCU == OPT_MCU_RX65X - // no header needed - -#elif CFG_TUSB_MCU == OPT_MCU_GD32VF103 - #include "gd32vf103.h" - -#else - #error "Missing MCU header" -#endif - - -#endif /* BOARD_MCU_H_ */ diff --git a/tinyusb/hw/bsp/d5035_01/board.mk b/tinyusb/hw/bsp/d5035_01/board.mk deleted file mode 100755 index 1d09bd3d..00000000 --- a/tinyusb/hw/bsp/d5035_01/board.mk +++ /dev/null @@ -1,58 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/microchip -HWREV ?= 1 - -CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mlong-calls \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib -nostartfiles \ - -D__SAME51J19A__ \ - -DCONF_CPU_FREQUENCY=80000000 \ - -DCONF_GCLK_USB_FREQUENCY=48000000 \ - -DCFG_TUSB_MCU=OPT_MCU_SAME5X \ - -DD5035_01=1 \ - -DBOARD_NAME="\"D5035-01\"" \ - -DSVC_Handler=SVCall_Handler \ - -DHWREV=$(HWREV) - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/same51j19a_flash.ld - -SRC_C += \ - src/portable/microchip/samd/dcd_samd.c \ - hw/mcu/microchip/same51/gcc/gcc/startup_same51.c \ - hw/mcu/microchip/same51/gcc/system_same51.c - -ifdef SYSCALLS -ifneq ($(SYSCALLS),0) - SRC_C += hw/mcu/microchip/same51/hal/utils/src/utils_syscalls.c -endif -endif - -ifdef LOG -ifneq ($(LOG),0) - SRC_C += hw/mcu/microchip/same51/hal/utils/src/utils_syscalls.c -endif -endif - -INC += \ - $(TOP)/hw/mcu/microchip/same51/ \ - $(TOP)/hw/mcu/microchip/same51/config \ - $(TOP)/hw/mcu/microchip/same51/include \ - $(TOP)/hw/mcu/microchip/same51/hal/include \ - $(TOP)/hw/mcu/microchip/same51/hal/utils/include \ - $(TOP)/hw/mcu/microchip/same51/hpl/port \ - $(TOP)/hw/mcu/microchip/same51/hri \ - $(TOP)/hw/mcu/microchip/same51/CMSIS/Include - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = ATSAME51J19 - -# flash using jlink -flash: flash-jlink diff --git a/tinyusb/hw/bsp/d5035_01/d5035_01.c b/tinyusb/hw/bsp/d5035_01/d5035_01.c deleted file mode 100755 index 5685ff16..00000000 --- a/tinyusb/hw/bsp/d5035_01/d5035_01.c +++ /dev/null @@ -1,353 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020 Jean Gressmann <jean@0x42.de> - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#include <sam.h> -#include "bsp/board.h" - -#include <hal/include/hal_gpio.h> - -#if CONF_CPU_FREQUENCY != 80000000 -# error "CONF_CPU_FREQUENCY" must 80000000 -#endif - -#if CONF_GCLK_USB_FREQUENCY != 48000000 -# error "CONF_GCLK_USB_FREQUENCY" must 48000000 -#endif - -#if !defined(HWREV) -# error Define "HWREV" -#endif - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_0_Handler (void) -{ - tud_int_handler(0); -} - -void USB_1_Handler (void) -{ - tud_int_handler(0); -} - -void USB_2_Handler (void) -{ - tud_int_handler(0); -} - -void USB_3_Handler (void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ -#define LED_PIN PIN_PA02 - -#if HWREV < 3 -# define BOARD_SERCOM SERCOM5 -#else -# define BOARD_SERCOM SERCOM0 -#endif - -static inline void init_clock(void) -{ - /* AUTOWS is enabled by default in REG_NVMCTRL_CTRLA - no need to change the number of wait states when changing the core clock */ -#if HWREV == 1 - /* configure XOSC1 for a 16MHz crystal connected to XIN1/XOUT1 */ - OSCCTRL->XOSCCTRL[1].reg = - OSCCTRL_XOSCCTRL_STARTUP(6) | // 1,953 ms - OSCCTRL_XOSCCTRL_RUNSTDBY | - OSCCTRL_XOSCCTRL_ENALC | - OSCCTRL_XOSCCTRL_IMULT(4) | - OSCCTRL_XOSCCTRL_IPTAT(3) | - OSCCTRL_XOSCCTRL_XTALEN | - OSCCTRL_XOSCCTRL_ENABLE; - while(0 == OSCCTRL->STATUS.bit.XOSCRDY1); - - OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(3) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC1_Val); /* pre-scaler = 8, input = XOSC1 */ - OSCCTRL->Dpll[0].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(39); /* multiply by 40 -> 80 MHz */ - OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; - while(0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */ - - OSCCTRL->Dpll[1].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(7) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC1_Val); /* pre-scaler = 16, input = XOSC1 */ - OSCCTRL->Dpll[1].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(47); /* multiply by 48 -> 48 MHz */ - OSCCTRL->Dpll[1].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; - while(0 == OSCCTRL->Dpll[1].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL1 to be ready */ -#else // HWREV >= 1 - /* configure XOSC0 for a 16MHz crystal connected to XIN0/XOUT0 */ - OSCCTRL->XOSCCTRL[0].reg = - OSCCTRL_XOSCCTRL_STARTUP(6) | // 1,953 ms - OSCCTRL_XOSCCTRL_RUNSTDBY | - OSCCTRL_XOSCCTRL_ENALC | - OSCCTRL_XOSCCTRL_IMULT(4) | - OSCCTRL_XOSCCTRL_IPTAT(3) | - OSCCTRL_XOSCCTRL_XTALEN | - OSCCTRL_XOSCCTRL_ENABLE; - while(0 == OSCCTRL->STATUS.bit.XOSCRDY0); - - OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(3) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC0_Val); /* pre-scaler = 8, input = XOSC1 */ - OSCCTRL->Dpll[0].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(39); /* multiply by 40 -> 80 MHz */ - OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; - while(0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */ - - OSCCTRL->Dpll[1].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(7) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC0_Val); /* pre-scaler = 16, input = XOSC1 */ - OSCCTRL->Dpll[1].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(47); /* multiply by 48 -> 48 MHz */ - OSCCTRL->Dpll[1].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; - while(0 == OSCCTRL->Dpll[1].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL1 to be ready */ -#endif // HWREV - - /* configure clock-generator 0 to use DPLL0 as source -> GCLK0 is used for the core */ - GCLK->GENCTRL[0].reg = - GCLK_GENCTRL_DIV(0) | - GCLK_GENCTRL_RUNSTDBY | - GCLK_GENCTRL_GENEN | - GCLK_GENCTRL_SRC_DPLL0 | /* DPLL0 */ - GCLK_GENCTRL_IDC ; - while(1 == GCLK->SYNCBUSY.bit.GENCTRL0); /* wait for the synchronization between clock domains to be complete */ - - /* configure clock-generator 1 to use DPLL1 as source -> for use with some peripheral */ - GCLK->GENCTRL[1].reg = - GCLK_GENCTRL_DIV(0) | - GCLK_GENCTRL_RUNSTDBY | - GCLK_GENCTRL_GENEN | - GCLK_GENCTRL_SRC_DPLL1 | - GCLK_GENCTRL_IDC ; - while(1 == GCLK->SYNCBUSY.bit.GENCTRL1); /* wait for the synchronization between clock domains to be complete */ - - /* configure clock-generator 2 to use DPLL0 as source -> for use with SERCOM */ - GCLK->GENCTRL[2].reg = - GCLK_GENCTRL_DIV(1) | /* 80MHz */ - GCLK_GENCTRL_RUNSTDBY | - GCLK_GENCTRL_GENEN | - GCLK_GENCTRL_SRC_DPLL0 | - GCLK_GENCTRL_IDC ; - while(1 == GCLK->SYNCBUSY.bit.GENCTRL2); /* wait for the synchronization between clock domains to be complete */ -} - -static inline void uart_init(void) -{ -#if HWREV < 3 - /* configure SERCOM5 on PB02 */ - PORT->Group[1].WRCONFIG.reg = - PORT_WRCONFIG_WRPINCFG | - PORT_WRCONFIG_WRPMUX | - PORT_WRCONFIG_PMUX(3) | /* function D */ - PORT_WRCONFIG_DRVSTR | - PORT_WRCONFIG_PINMASK(0x0004) | /* PB02 */ - PORT_WRCONFIG_PMUXEN; - - MCLK->APBDMASK.bit.SERCOM5_ = 1; - GCLK->PCHCTRL[SERCOM5_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN; /* setup SERCOM to use GLCK2 -> 80MHz */ - - SERCOM5->USART.CTRLA.reg = 0x00; /* disable SERCOM -> enable config */ - while(SERCOM5->USART.SYNCBUSY.bit.ENABLE); - - SERCOM5->USART.CTRLA.reg = /* CMODE = 0 -> async, SAMPA = 0, FORM = 0 -> USART frame, SMPR = 0 -> arithmetic baud rate */ - SERCOM_USART_CTRLA_SAMPR(1) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */ -// SERCOM_USART_CTRLA_FORM(0) | /* 0 = USART Frame, 2 = LIN Master */ - SERCOM_USART_CTRLA_DORD | /* LSB first */ - SERCOM_USART_CTRLA_MODE(1) | /* 0 = Asynchronous, 1 = USART with internal clock */ - SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */ - SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */ - - SERCOM5->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */ - SERCOM_USART_CTRLB_TXEN; /* transmitter enabled */ - SERCOM5->USART.CTRLC.reg = 0x00; - // 21.701388889 @ baud rate of 230400 bit/s, table 33-2, p 918 of DS60001507E - SERCOM5->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(7) | SERCOM_USART_BAUD_FRAC_BAUD(21); - -// SERCOM5->USART.INTENSET.reg = SERCOM_USART_INTENSET_TXC; - SERCOM5->SPI.CTRLA.bit.ENABLE = 1; /* activate SERCOM */ - while(SERCOM5->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */ -#else -/* configure SERCOM0 on PA08 */ - PORT->Group[0].WRCONFIG.reg = - PORT_WRCONFIG_WRPINCFG | - PORT_WRCONFIG_WRPMUX | - PORT_WRCONFIG_PMUX(2) | /* function C */ - PORT_WRCONFIG_DRVSTR | - PORT_WRCONFIG_PINMASK(0x0100) | /* PA08 */ - PORT_WRCONFIG_PMUXEN; - - MCLK->APBAMASK.bit.SERCOM0_ = 1; - GCLK->PCHCTRL[SERCOM0_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN; /* setup SERCOM to use GLCK2 -> 80MHz */ - - SERCOM0->USART.CTRLA.reg = 0x00; /* disable SERCOM -> enable config */ - while(SERCOM0->USART.SYNCBUSY.bit.ENABLE); - - SERCOM0->USART.CTRLA.reg = /* CMODE = 0 -> async, SAMPA = 0, FORM = 0 -> USART frame, SMPR = 0 -> arithmetic baud rate */ - SERCOM_USART_CTRLA_SAMPR(1) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */ -// SERCOM_USART_CTRLA_FORM(0) | /* 0 = USART Frame, 2 = LIN Master */ - SERCOM_USART_CTRLA_DORD | /* LSB first */ - SERCOM_USART_CTRLA_MODE(1) | /* 0 = Asynchronous, 1 = USART with internal clock */ - SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */ - SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */ - - SERCOM0->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */ - SERCOM_USART_CTRLB_TXEN; /* transmitter enabled */ - SERCOM0->USART.CTRLC.reg = 0x00; - // 21.701388889 @ baud rate of 230400 bit/s, table 33-2, p 918 of DS60001507E - SERCOM0->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(7) | SERCOM_USART_BAUD_FRAC_BAUD(21); - -// SERCOM0->USART.INTENSET.reg = SERCOM_USART_INTENSET_TXC; - SERCOM0->SPI.CTRLA.bit.ENABLE = 1; /* activate SERCOM */ - while(SERCOM0->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */ -#endif -} - -static inline void uart_send_buffer(uint8_t const *text, size_t len) -{ - for (size_t i = 0; i < len; ++i) { - BOARD_SERCOM->USART.DATA.reg = text[i]; - while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_SPI_INTFLAG_TXC) == 0); - } -} - -static inline void uart_send_str(const char* text) -{ - while (*text) { - BOARD_SERCOM->USART.DATA.reg = *text++; - while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_SPI_INTFLAG_TXC) == 0); - } -} - - -void board_init(void) -{ - init_clock(); - - SystemCoreClock = CONF_CPU_FREQUENCY; - -#if CFG_TUSB_OS == OPT_OS_NONE - SysTick_Config(CONF_CPU_FREQUENCY / 1000); -#endif - - uart_init(); -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " UART initialized\n"); - tu_printf(BOARD_NAME " reset cause %#02x\n", RSTC->RCAUSE.reg); -#endif - - // Led init - gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); - gpio_set_pin_level(LED_PIN, 0); - -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " LED pin configured\n"); -#endif - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_3_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - - -#if TUSB_OPT_DEVICE_ENABLED -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " USB device enabled\n"); -#endif - - /* USB clock init - * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock - * for low speed and full speed operation. */ - hri_gclk_write_PCHCTRL_reg(GCLK, USB_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK1_Val | GCLK_PCHCTRL_CHEN); - hri_mclk_set_AHBMASK_USB_bit(MCLK); - hri_mclk_set_APBBMASK_USB_bit(MCLK); - - // USB pin init - gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA24, false); - gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); - gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA25, false); - gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); - - gpio_set_pin_function(PIN_PA24, PINMUX_PA24H_USB_DM); - gpio_set_pin_function(PIN_PA25, PINMUX_PA25H_USB_DP); - - -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " USB device configured\n"); -#endif -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - gpio_set_pin_level(LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - // this board has no button - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - if (len < 0) { - uart_send_str(buf); - } else { - uart_send_buffer(buf, len); - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/tinyusb/hw/bsp/d5035_01/same51j19a_flash.ld b/tinyusb/hw/bsp/d5035_01/same51j19a_flash.ld deleted file mode 100755 index 328d1c72..00000000 --- a/tinyusb/hw/bsp/d5035_01/same51j19a_flash.ld +++ /dev/null @@ -1,163 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAME51J19A - * - * Copyright (c) 2019 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00080000 - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00030000 - bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 - qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x1000; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - .bkupram (NOLOAD): - { - . = ALIGN(8); - _sbkupram = .; - *(.bkupram .bkupram.*); - . = ALIGN(8); - _ebkupram = .; - } > bkupram - - .qspi (NOLOAD): - { - . = ALIGN(8); - _sqspi = .; - *(.qspi .qspi.*); - . = ALIGN(8); - _eqspi = .; - } > qspi - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/da14695_dk_usb/board.mk b/tinyusb/hw/bsp/da14695_dk_usb/board.mk deleted file mode 100755 index e969c79c..00000000 --- a/tinyusb/hw/bsp/da14695_dk_usb/board.mk +++ /dev/null @@ -1,55 +0,0 @@ -CFLAGS += \ - -flto \ - -mthumb \ - -mthumb-interwork \ - -mabi=aapcs \ - -mcpu=cortex-m33+nodsp \ - -mfloat-abi=hard \ - -mfpu=fpv5-sp-d16 \ - -nostdlib \ - -DCORE_M33 \ - -DCFG_TUSB_MCU=OPT_MCU_DA1469X \ - -DCFG_TUD_ENDPOINT0_SIZE=8\ - -MCU_FAMILY_DIR = hw/mcu/dialog/da1469x - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/da1469x.ld - -# While this is for da1469x chip, there is chance that da1468x chip family will also work -SRC_C += \ - src/portable/dialog/da146xx/dcd_da146xx.c \ - $(MCU_FAMILY_DIR)/src/system_da1469x.c \ - $(MCU_FAMILY_DIR)/src/da1469x_clock.c \ - $(MCU_FAMILY_DIR)/src/hal_gpio.c \ - -SRC_S += hw/bsp/$(BOARD)/gcc_startup_da1469x.S - -INC += \ - $(TOP)/hw/bsp/$(BOARD) \ - $(TOP)/$(MCU_FAMILY_DIR)/include \ - $(TOP)/$(MCU_FAMILY_DIR)/SDK_10.0.8.105/sdk/bsp/include - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM33_NTZ/non_secure - -# For flash-jlink target -JLINK_DEVICE = DA14695 - -# flash using jlink but with some twists -flash: flash-dialog - -flash-dialog: $(BUILD)/$(PROJECT).bin - @echo '#define SW_VERSION "v_1.0.0.1"' >$(BUILD)/version.h - @echo '#define SW_VERSION_DATE "'`date +"%Y-%m-%d %H:%M"`'"' >>$(BUILD)/version.h - mkimage da1469x $(BUILD)/$(PROJECT).bin $(BUILD)/version.h $^.img - cp $(TOP)/hw/bsp/$(BOARD)/product_header.dump $(BUILD)/$(BOARD)-image.bin - cat $^.img >> $(BUILD)/$(BOARD)-image.bin - @echo r > $(BUILD)/$(BOARD).jlink - @echo halt >> $(BUILD)/$(BOARD).jlink - @echo loadfile $(BUILD)/$(BOARD)-image.bin 0x16000000 >> $(BUILD)/$(BOARD).jlink - @echo r >> $(BUILD)/$(BOARD).jlink - @echo go >> $(BUILD)/$(BOARD).jlink - @echo exit >> $(BUILD)/$(BOARD).jlink - $(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $(BUILD)/$(BOARD).jlink - diff --git a/tinyusb/hw/bsp/da14695_dk_usb/da14695_dk_usb.c b/tinyusb/hw/bsp/da14695_dk_usb/da14695_dk_usb.c deleted file mode 100755 index e7c7ae36..00000000 --- a/tinyusb/hw/bsp/da14695_dk_usb/da14695_dk_usb.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020 Jerzy Kasenberg - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board.h" -#include <hal/hal_gpio.h> -#include <mcu/mcu.h> - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -#define LED_PIN 33 // P1.1 -#define LED_STATE_ON 1 -#define LED_STATE_OFF (1-LED_STATE_ON) - -#define BUTTON_PIN 6 - -void UnhandledIRQ(void) -{ - CRG_TOP->SYS_CTRL_REG = 0x80; - __BKPT(1); - while(1); -} - -void board_init(void) -{ - // LED - hal_gpio_init_out(LED_PIN, LED_STATE_ON); - - hal_gpio_init_out(1, 0); - hal_gpio_init_out(2, 0); - hal_gpio_init_out(3, 0); - hal_gpio_init_out(4, 0); - hal_gpio_init_out(5, 0); - - // Button - hal_gpio_init_in(BUTTON_PIN, HAL_GPIO_PULL_NONE); - - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - - NVIC_SetPriority(USB_IRQn, 2); - - /* Setup USB IRQ */ - NVIC_SetPriority(USB_IRQn, 2); - NVIC_EnableIRQ(USB_IRQn); - - /* Use PLL96 / 2 clock not HCLK */ - CRG_TOP->CLK_CTRL_REG &= ~CRG_TOP_CLK_CTRL_REG_USB_CLK_SRC_Msk; - - mcu_gpio_set_pin_function(14, MCU_GPIO_MODE_INPUT, MCU_GPIO_FUNC_USB); - mcu_gpio_set_pin_function(15, MCU_GPIO_MODE_INPUT, MCU_GPIO_FUNC_USB); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - hal_gpio_write(LED_PIN, state ? LED_STATE_ON : LED_STATE_OFF); -} - -uint32_t board_button_read(void) -{ - // button is active LOW - return hal_gpio_read(BUTTON_PIN) ^ 1; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void)buf; - (void)len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void)buf; - (void)len; - - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/tinyusb/hw/bsp/da14695_dk_usb/da1469x.ld b/tinyusb/hw/bsp/da14695_dk_usb/da1469x.ld deleted file mode 100755 index 96507d6e..00000000 --- a/tinyusb/hw/bsp/da14695_dk_usb/da1469x.ld +++ /dev/null @@ -1,245 +0,0 @@ -/* - * Licensed to the Apache Software Foundation (ASF) under one - * or more contributor license agreements. See the NOTICE file - * distributed with this work for additional information - * regarding copyright ownership. The ASF licenses this file - * to you under the Apache License, Version 2.0 (the - * "License"); you may not use this file except in compliance - * with the License. You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, - * software distributed under the License is distributed on an - * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY - * KIND, either express or implied. See the License for the - * specific language governing permissions and limitations - * under the License. - */ - -MEMORY -{ - /* - * Flash is remapped at 0x0 by 1st stage bootloader, but this is done with - * an offset derived from image header thus it is safer to use remapped - * address space at 0x0 instead of QSPI_M address space at 0x16000000. - * Bootloader partition is 32K, but 9K is currently reserved for product - * header (8K) and image header (1K). - * First 512 bytes of SYSRAM are remapped at 0x0 and used as ISR vector - * (there's no need to reallocate ISR vector) and thus cannot be used by - * application. - */ - - FLASH (r) : ORIGIN = (0x00000000), LENGTH = (1024 * 1024) - RAM (rw) : ORIGIN = (0x20000000), LENGTH = (512 * 1024) -} - -OUTPUT_FORMAT ("elf32-littlearm", "elf32-bigarm", "elf32-littlearm") - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __HeapBase - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - * __bssnz_start__ - * __bssnz_end__ - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - __text = .; - - .text : - { - __isr_vector_start = .; - KEEP(*(.isr_vector)) - /* ISR vector shall have exactly 512 bytes */ - . = __isr_vector_start + 0x200; - __isr_vector_end = .; - - *(.text) - *(.text.*) - - *(.libcmac.rom) - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - *(.eh_frame*) - . = ALIGN(4); - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - . = ALIGN(4); - } > FLASH - - __exidx_start = .; - .ARM : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - . = ALIGN(4); - } > FLASH - __exidx_end = .; - - .intvect : - { - . = ALIGN(4); - __intvect_start__ = .; - . = . + (__isr_vector_end - __isr_vector_start); - . = ALIGN(4); - } > RAM - - .sleep_state (NOLOAD) : - { - . = ALIGN(4); - *(sleep_state) - } > RAM - - /* This section will be zeroed by RTT package init */ - .rtt (NOLOAD): - { - . = ALIGN(4); - *(.rtt) - . = ALIGN(4); - } > RAM - - __text_ram_addr = LOADADDR(.text_ram); - - .text_ram : - { - . = ALIGN(4); - __text_ram_start__ = .; - *(.text_ram*) - . = ALIGN(4); - __text_ram_end__ = .; - } > RAM AT > FLASH - - __etext = LOADADDR(.data); - - .data : - { - __data_start__ = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - *(.preinit_array) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - *(SORT(.init_array.*)) - *(.init_array) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - *(SORT(.fini_array.*)) - *(.fini_array) - PROVIDE_HIDDEN (__fini_array_end = .); - - *(.jcr) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - } > RAM AT > FLASH - - .bssnz : - { - . = ALIGN(4); - __bssnz_start__ = .; - *(.bss.core.nz*) - . = ALIGN(4); - __bssnz_end__ = .; - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - } > RAM - - .cmac (NOLOAD) : - { - . = ALIGN(0x400); - *(.libcmac.ram) - } > RAM - - /* Heap starts after BSS */ - . = ALIGN(8); - __HeapBase = .; - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > RAM - - _ram_start = ORIGIN(RAM); - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Top of head is the bottom of the stack */ - __HeapLimit = __StackLimit; - end = __HeapLimit; - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__HeapBase <= __HeapLimit, "region RAM overflowed with stack") - - /* Check that intvect is at the beginning of RAM */ - ASSERT(__intvect_start__ == ORIGIN(RAM), "intvect is not at beginning of RAM") -} - diff --git a/tinyusb/hw/bsp/da14695_dk_usb/gcc_startup_da1469x.S b/tinyusb/hw/bsp/da14695_dk_usb/gcc_startup_da1469x.S deleted file mode 100755 index d47fbcd9..00000000 --- a/tinyusb/hw/bsp/da14695_dk_usb/gcc_startup_da1469x.S +++ /dev/null @@ -1,301 +0,0 @@ -/* - * Licensed to the Apache Software Foundation (ASF) under one - * or more contributor license agreements. See the NOTICE file - * distributed with this work for additional information - * regarding copyright ownership. The ASF licenses this file - * to you under the Apache License, Version 2.0 (the - * "License"); you may not use this file except in compliance - * with the License. You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, - * software distributed under the License is distributed on an - * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY - * KIND, either express or implied. See the License for the - * specific language governing permissions and limitations - * under the License. - */ - - #include "syscfg/syscfg.h" - - .syntax unified - .arch armv7-m - - .section .stack - .align 3 -#ifdef __STACK_SIZE - .equ Stack_Size, __STACK_SIZE -#else - .equ Stack_Size, 0xC00 -#endif - .equ SYS_CTRL_REG, 0x50000024 - .equ CACHE_FLASH_REG, 0x100C0040 - .equ RESET_STAT_REG, 0x500000BC - - .globl __StackTop - .globl __StackLimit -__StackLimit: - .space Stack_Size - .size __StackLimit, . - __StackLimit -__StackTop: - .size __StackTop, . - __StackTop - - .section .heap - .align 3 -#ifdef __HEAP_SIZE - .equ Heap_Size, __HEAP_SIZE -#else - .equ Heap_Size, 0 -#endif - .globl __HeapBase - .globl __HeapLimit -__HeapBase: - .if Heap_Size - .space Heap_Size - .endif - .size __HeapBase, . - __HeapBase -__HeapLimit: - .size __HeapLimit, . - __HeapLimit - - .section .isr_vector - .align 2 - .globl __isr_vector -__isr_vector: - .long __StackTop - .long Reset_Handler - /* Cortex-M33 interrupts */ - .long NMI_Handler - .long HardFault_Handler - .long MemoryManagement_Handler - .long BusFault_Handler - .long UsageFault_Handler - .long SecureFault_Handler - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long SVC_Handler - .long DebugMonitor_Handler - .long 0 /* Reserved */ - .long PendSV_Handler - .long SysTick_Handler - /* DA1469x interrupts */ - .long SENSOR_NODE_IRQHandler - .long DMA_IRQHandler - .long CHARGER_STATE_IRQHandler - .long CHARGER_ERROR_IRQHandler - .long CMAC2SYS_IRQHandler - .long UART_IRQHandler - .long UART2_IRQHandler - .long UART3_IRQHandler - .long I2C_IRQHandler - .long I2C2_IRQHandler - .long SPI_IRQHandler - .long SPI2_IRQHandler - .long PCM_IRQHandler - .long SRC_IN_IRQHandler - .long SRC_OUT_IRQHandler - .long USB_IRQHandler - .long TIMER_IRQHandler - .long TIMER2_IRQHandler - .long RTC_IRQHandler - .long KEY_WKUP_GPIO_IRQHandler - .long PDC_IRQHandler - .long VBUS_IRQHandler - .long MRM_IRQHandler - .long MOTOR_CONTROLLER_IRQHandler - .long TRNG_IRQHandler - .long DCDC_IRQHandler - .long XTAL32M_RDY_IRQHandler - .long ADC_IRQHandler - .long ADC2_IRQHandler - .long CRYPTO_IRQHandler - .long CAPTIMER1_IRQHandler - .long RFDIAG_IRQHandler - .long LCD_CONTROLLER_IRQHandler - .long PLL_LOCK_IRQHandler - .long TIMER3_IRQHandler - .long TIMER4_IRQHandler - .long LRA_IRQHandler - .long RTC_EVENT_IRQHandler - .long GPIO_P0_IRQHandler - .long GPIO_P1_IRQHandler - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .size __isr_vector, . - __isr_vector - - .text - .thumb - .thumb_func - .align 2 - .globl Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - /* Make sure interrupt vector is remapped at 0x0 */ - ldr r1, =SYS_CTRL_REG - ldrh r2, [r1, #0] - orrs r2, r2, #8 - strh r2, [r1, #0] - -#if !MYNEWT_VAL(RAM_RESIDENT) -/* - * Flash is remapped at 0x0 with an offset, i.e. 0x0 does not correspond to - * 0x16000000 but to start of an image on flash. This is calculated from product - * header by 1st state bootloader and configured in CACHE_FLASH_REG. We need to - * retrieve proper offset value for calculations later. - */ - ldr r1, =CACHE_FLASH_REG - ldr r4, [r1, #0] - mov r2, r4 - mov r3, #0xFFFF - bic r4, r4, r3 /* CACHE_FLASH_REG[FLASH_REGION_BASE] */ - mov r3, #0xFFF0 - and r2, r2, r3 /* CACHE_FLASH_REG[FLASH_REGION_OFFSET] */ - lsr r2, r2, #2 - orr r4, r4, r2 - -/* Copy ISR vector from flash to RAM */ - ldr r1, =__isr_vector_start /* src ptr */ - ldr r2, =__isr_vector_end /* src end */ - ldr r3, =__intvect_start__ /* dst ptr */ -/* Make sure we copy from QSPIC address range, not from remapped range */ - cmp r1, r4 - itt lt - addlt r1, r1, r4 - addlt r2, r2, r4 -.loop_isr_copy: - cmp r1, r2 - ittt lt - ldrlt r0, [r1], #4 - strlt r0, [r3], #4 - blt .loop_isr_copy - -/* Copy QSPI code from flash to RAM */ - ldr r1, =__text_ram_addr /* src ptr */ - ldr r2, =__text_ram_start__ /* ptr */ - ldr r3, =__text_ram_end__ /* dst end */ -.loop_code_text_ram_copy: - cmp r2, r3 - ittt lt - ldrlt r0, [r1], #4 - strlt r0, [r2], #4 - blt .loop_code_text_ram_copy - -/* Copy data from flash to RAM */ - ldr r1, =__etext /* src ptr */ - ldr r2, =__data_start__ /* dst ptr */ - ldr r3, =__data_end__ /* dst end */ -.loop_data_copy: - cmp r2, r3 - ittt lt - ldrlt r0, [r1], #4 - strlt r0, [r2], #4 - blt .loop_data_copy -#endif - -/* Clear BSS */ - movs r0, 0 - ldr r1, =__bss_start__ - ldr r2, =__bss_end__ -.loop_bss_clear: - cmp r1, r2 - itt lt - strlt r0, [r1], #4 - blt .loop_bss_clear - - ldr r0, =__HeapBase - ldr r1, =__HeapLimit -/* Call static constructors */ - bl __libc_init_array - - bl SystemInit - bl main - - .pool - .size Reset_Handler, . - Reset_Handler - -/* Default interrupt handler */ - .type Default_Handler, %function -Default_Handler: - ldr r1, =SYS_CTRL_REG - ldrh r2, [r1, #0] - orrs r2, r2, #0x80 /* DEBUGGER_ENABLE */ - strh r2, [r1, #0] - b . - - .size Default_Handler, . - Default_Handler - -/* Default handlers for all interrupts */ - .macro IRQ handler - .weak \handler - .set \handler, Default_Handler - .endm - - /* Cortex-M33 interrupts */ - IRQ NMI_Handler - IRQ HardFault_Handler - IRQ MemoryManagement_Handler - IRQ BusFault_Handler - IRQ UsageFault_Handler - IRQ SecureFault_Handler - IRQ SVC_Handler - IRQ DebugMonitor_Handler - IRQ PendSV_Handler - IRQ SysTick_Handler - /* DA1469x interrupts */ - IRQ SENSOR_NODE_IRQHandler - IRQ DMA_IRQHandler - IRQ CHARGER_STATE_IRQHandler - IRQ CHARGER_ERROR_IRQHandler - IRQ CMAC2SYS_IRQHandler - IRQ UART_IRQHandler - IRQ UART2_IRQHandler - IRQ UART3_IRQHandler - IRQ I2C_IRQHandler - IRQ I2C2_IRQHandler - IRQ SPI_IRQHandler - IRQ SPI2_IRQHandler - IRQ PCM_IRQHandler - IRQ SRC_IN_IRQHandler - IRQ SRC_OUT_IRQHandler - IRQ USB_IRQHandler - IRQ TIMER_IRQHandler - IRQ TIMER2_IRQHandler - IRQ RTC_IRQHandler - IRQ KEY_WKUP_GPIO_IRQHandler - IRQ PDC_IRQHandler - IRQ VBUS_IRQHandler - IRQ MRM_IRQHandler - IRQ MOTOR_CONTROLLER_IRQHandler - IRQ TRNG_IRQHandler - IRQ DCDC_IRQHandler - IRQ XTAL32M_RDY_IRQHandler - IRQ ADC_IRQHandler - IRQ ADC2_IRQHandler - IRQ CRYPTO_IRQHandler - IRQ CAPTIMER1_IRQHandler - IRQ RFDIAG_IRQHandler - IRQ LCD_CONTROLLER_IRQHandler - IRQ PLL_LOCK_IRQHandler - IRQ TIMER3_IRQHandler - IRQ TIMER4_IRQHandler - IRQ LRA_IRQHandler - IRQ RTC_EVENT_IRQHandler - IRQ GPIO_P0_IRQHandler - IRQ GPIO_P1_IRQHandler - IRQ RESERVED40_IRQHandler - IRQ RESERVED41_IRQHandler - IRQ RESERVED42_IRQHandler - IRQ RESERVED43_IRQHandler - IRQ RESERVED44_IRQHandler - IRQ RESERVED45_IRQHandler - IRQ RESERVED46_IRQHandler - IRQ RESERVED47_IRQHandler - -.end diff --git a/tinyusb/hw/bsp/da14695_dk_usb/product_header.dump b/tinyusb/hw/bsp/da14695_dk_usb/product_header.dump Binary files differdeleted file mode 100755 index ea484224..00000000 --- a/tinyusb/hw/bsp/da14695_dk_usb/product_header.dump +++ /dev/null diff --git a/tinyusb/hw/bsp/da14695_dk_usb/syscfg/syscfg.h b/tinyusb/hw/bsp/da14695_dk_usb/syscfg/syscfg.h deleted file mode 100755 index 6cbb4319..00000000 --- a/tinyusb/hw/bsp/da14695_dk_usb/syscfg/syscfg.h +++ /dev/null @@ -1,34 +0,0 @@ -/** - * This file was generated by Apache newt version: 1.9.0-dev - */ - -#ifndef H_MYNEWT_SYSCFG_ -#define H_MYNEWT_SYSCFG_ - -/** - * This macro exists to ensure code includes this header when needed. If code - * checks the existence of a setting directly via ifdef without including this - * header, the setting macro will silently evaluate to 0. In contrast, an - * attempt to use these macros without including this header will result in a - * compiler error. - */ -#define MYNEWT_VAL(_name) MYNEWT_VAL_ ## _name -#define MYNEWT_VAL_CHOICE(_name, _val) MYNEWT_VAL_ ## _name ## __ ## _val - -#ifndef MYNEWT_VAL_RAM_RESIDENT -#define MYNEWT_VAL_RAM_RESIDENT (0) -#endif - -#ifndef MYNEWT_VAL_MCU_GPIO_MAX_IRQ -#define MYNEWT_VAL_MCU_GPIO_MAX_IRQ (4) -#endif - -#ifndef MYNEWT_VAL_MCU_GPIO_RETAINABLE_NUM -#define MYNEWT_VAL_MCU_GPIO_RETAINABLE_NUM (-1) -#endif - -#ifndef MYNEWT_VAL_MCU_CLOCK_XTAL32M_SETTLE_TIME_US -#define MYNEWT_VAL_MCU_CLOCK_XTAL32M_SETTLE_TIME_US (2000) -#endif - -#endif diff --git a/tinyusb/hw/bsp/da1469x_dk_pro/board.mk b/tinyusb/hw/bsp/da1469x_dk_pro/board.mk deleted file mode 100755 index 980fc422..00000000 --- a/tinyusb/hw/bsp/da1469x_dk_pro/board.mk +++ /dev/null @@ -1,55 +0,0 @@ -CFLAGS += \ - -flto \ - -mthumb \ - -mthumb-interwork \ - -mabi=aapcs \ - -mcpu=cortex-m33+nodsp \ - -mfloat-abi=hard \ - -mfpu=fpv5-sp-d16 \ - -nostdlib \ - -DCORE_M33 \ - -DCFG_TUSB_MCU=OPT_MCU_DA1469X \ - -DCFG_TUD_ENDPOINT0_SIZE=8\ - -MCU_FAMILY_DIR = hw/mcu/dialog/da1469x - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/da1469x.ld - -# While this is for da1469x chip, there is chance that da1468x chip family will also work -SRC_C += \ - src/portable/dialog/da146xx/dcd_da146xx.c \ - $(MCU_FAMILY_DIR)/src/system_da1469x.c \ - $(MCU_FAMILY_DIR)/src/da1469x_clock.c \ - $(MCU_FAMILY_DIR)/src/hal_gpio.c \ - -SRC_S += hw/bsp/$(BOARD)/gcc_startup_da1469x.S - -INC += \ - $(TOP)/hw/bsp/$(BOARD) \ - $(TOP)/$(MCU_FAMILY_DIR)/include \ - $(TOP)/$(MCU_FAMILY_DIR)/SDK_10.0.8.105/sdk/bsp/include - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM33_NTZ/non_secure - -# For flash-jlink target -JLINK_DEVICE = DA14699 - -# flash using jlink but with some twists -flash: flash-dialog - -flash-dialog: $(BUILD)/$(PROJECT).bin - @echo '#define SW_VERSION "v_1.0.0.1"' >$(BUILD)/version.h - @echo '#define SW_VERSION_DATE "'`date +"%Y-%m-%d %H:%M"`'"' >>$(BUILD)/version.h - mkimage da1469x $(BUILD)/$(PROJECT).bin $(BUILD)/version.h $^.img - cp $(TOP)/hw/bsp/$(BOARD)/product_header.dump $(BUILD)/$(BOARD)-image.bin - cat $^.img >> $(BUILD)/$(BOARD)-image.bin - @echo r > $(BUILD)/$(BOARD).jlink - @echo halt >> $(BUILD)/$(BOARD).jlink - @echo loadfile $(BUILD)/$(BOARD)-image.bin 0x16000000 >> $(BUILD)/$(BOARD).jlink - @echo r >> $(BUILD)/$(BOARD).jlink - @echo go >> $(BUILD)/$(BOARD).jlink - @echo exit >> $(BUILD)/$(BOARD).jlink - $(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $(BUILD)/$(BOARD).jlink - diff --git a/tinyusb/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c b/tinyusb/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c deleted file mode 100755 index 85fa1715..00000000 --- a/tinyusb/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020 Jerzy Kasenberg - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board.h" -#include <hal/hal_gpio.h> -#include <mcu/mcu.h> - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -#define LED_PIN 33 -#define LED_STATE_ON 1 -#define LED_STATE_OFF 0 - -#define BUTTON_PIN 6 - -void UnhandledIRQ(void) -{ - CRG_TOP->SYS_CTRL_REG = 0x80; - __BKPT(1); - while(1); -} - -void board_init(void) -{ - // LED - hal_gpio_init_out(LED_PIN, LED_STATE_ON); - - hal_gpio_init_out(1, 0); - hal_gpio_init_out(2, 0); - hal_gpio_init_out(3, 0); - hal_gpio_init_out(4, 0); - hal_gpio_init_out(5, 0); - - // Button - hal_gpio_init_in(BUTTON_PIN, HAL_GPIO_PULL_NONE); - - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - - NVIC_SetPriority(USB_IRQn, 2); - - /* Setup USB IRQ */ - NVIC_SetPriority(USB_IRQn, 2); - NVIC_EnableIRQ(USB_IRQn); - - /* Use PLL96 / 2 clock not HCLK */ - CRG_TOP->CLK_CTRL_REG &= ~CRG_TOP_CLK_CTRL_REG_USB_CLK_SRC_Msk; - - mcu_gpio_set_pin_function(14, MCU_GPIO_MODE_INPUT, MCU_GPIO_FUNC_USB); - mcu_gpio_set_pin_function(15, MCU_GPIO_MODE_INPUT, MCU_GPIO_FUNC_USB); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - hal_gpio_write(LED_PIN, state ? LED_STATE_ON : LED_STATE_OFF); -} - -uint32_t board_button_read(void) -{ - // button is active LOW - return hal_gpio_read(BUTTON_PIN) ^ 1; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void)buf; - (void)len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void)buf; - (void)len; - - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/tinyusb/hw/bsp/da1469x_dk_pro/da1469x.ld b/tinyusb/hw/bsp/da1469x_dk_pro/da1469x.ld deleted file mode 100755 index 96507d6e..00000000 --- a/tinyusb/hw/bsp/da1469x_dk_pro/da1469x.ld +++ /dev/null @@ -1,245 +0,0 @@ -/* - * Licensed to the Apache Software Foundation (ASF) under one - * or more contributor license agreements. See the NOTICE file - * distributed with this work for additional information - * regarding copyright ownership. The ASF licenses this file - * to you under the Apache License, Version 2.0 (the - * "License"); you may not use this file except in compliance - * with the License. You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, - * software distributed under the License is distributed on an - * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY - * KIND, either express or implied. See the License for the - * specific language governing permissions and limitations - * under the License. - */ - -MEMORY -{ - /* - * Flash is remapped at 0x0 by 1st stage bootloader, but this is done with - * an offset derived from image header thus it is safer to use remapped - * address space at 0x0 instead of QSPI_M address space at 0x16000000. - * Bootloader partition is 32K, but 9K is currently reserved for product - * header (8K) and image header (1K). - * First 512 bytes of SYSRAM are remapped at 0x0 and used as ISR vector - * (there's no need to reallocate ISR vector) and thus cannot be used by - * application. - */ - - FLASH (r) : ORIGIN = (0x00000000), LENGTH = (1024 * 1024) - RAM (rw) : ORIGIN = (0x20000000), LENGTH = (512 * 1024) -} - -OUTPUT_FORMAT ("elf32-littlearm", "elf32-bigarm", "elf32-littlearm") - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __HeapBase - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - * __bssnz_start__ - * __bssnz_end__ - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - __text = .; - - .text : - { - __isr_vector_start = .; - KEEP(*(.isr_vector)) - /* ISR vector shall have exactly 512 bytes */ - . = __isr_vector_start + 0x200; - __isr_vector_end = .; - - *(.text) - *(.text.*) - - *(.libcmac.rom) - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - *(.eh_frame*) - . = ALIGN(4); - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - . = ALIGN(4); - } > FLASH - - __exidx_start = .; - .ARM : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - . = ALIGN(4); - } > FLASH - __exidx_end = .; - - .intvect : - { - . = ALIGN(4); - __intvect_start__ = .; - . = . + (__isr_vector_end - __isr_vector_start); - . = ALIGN(4); - } > RAM - - .sleep_state (NOLOAD) : - { - . = ALIGN(4); - *(sleep_state) - } > RAM - - /* This section will be zeroed by RTT package init */ - .rtt (NOLOAD): - { - . = ALIGN(4); - *(.rtt) - . = ALIGN(4); - } > RAM - - __text_ram_addr = LOADADDR(.text_ram); - - .text_ram : - { - . = ALIGN(4); - __text_ram_start__ = .; - *(.text_ram*) - . = ALIGN(4); - __text_ram_end__ = .; - } > RAM AT > FLASH - - __etext = LOADADDR(.data); - - .data : - { - __data_start__ = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - *(.preinit_array) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - *(SORT(.init_array.*)) - *(.init_array) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - *(SORT(.fini_array.*)) - *(.fini_array) - PROVIDE_HIDDEN (__fini_array_end = .); - - *(.jcr) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - } > RAM AT > FLASH - - .bssnz : - { - . = ALIGN(4); - __bssnz_start__ = .; - *(.bss.core.nz*) - . = ALIGN(4); - __bssnz_end__ = .; - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - } > RAM - - .cmac (NOLOAD) : - { - . = ALIGN(0x400); - *(.libcmac.ram) - } > RAM - - /* Heap starts after BSS */ - . = ALIGN(8); - __HeapBase = .; - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > RAM - - _ram_start = ORIGIN(RAM); - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Top of head is the bottom of the stack */ - __HeapLimit = __StackLimit; - end = __HeapLimit; - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__HeapBase <= __HeapLimit, "region RAM overflowed with stack") - - /* Check that intvect is at the beginning of RAM */ - ASSERT(__intvect_start__ == ORIGIN(RAM), "intvect is not at beginning of RAM") -} - diff --git a/tinyusb/hw/bsp/da1469x_dk_pro/gcc_startup_da1469x.S b/tinyusb/hw/bsp/da1469x_dk_pro/gcc_startup_da1469x.S deleted file mode 100755 index d47fbcd9..00000000 --- a/tinyusb/hw/bsp/da1469x_dk_pro/gcc_startup_da1469x.S +++ /dev/null @@ -1,301 +0,0 @@ -/* - * Licensed to the Apache Software Foundation (ASF) under one - * or more contributor license agreements. See the NOTICE file - * distributed with this work for additional information - * regarding copyright ownership. The ASF licenses this file - * to you under the Apache License, Version 2.0 (the - * "License"); you may not use this file except in compliance - * with the License. You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, - * software distributed under the License is distributed on an - * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY - * KIND, either express or implied. See the License for the - * specific language governing permissions and limitations - * under the License. - */ - - #include "syscfg/syscfg.h" - - .syntax unified - .arch armv7-m - - .section .stack - .align 3 -#ifdef __STACK_SIZE - .equ Stack_Size, __STACK_SIZE -#else - .equ Stack_Size, 0xC00 -#endif - .equ SYS_CTRL_REG, 0x50000024 - .equ CACHE_FLASH_REG, 0x100C0040 - .equ RESET_STAT_REG, 0x500000BC - - .globl __StackTop - .globl __StackLimit -__StackLimit: - .space Stack_Size - .size __StackLimit, . - __StackLimit -__StackTop: - .size __StackTop, . - __StackTop - - .section .heap - .align 3 -#ifdef __HEAP_SIZE - .equ Heap_Size, __HEAP_SIZE -#else - .equ Heap_Size, 0 -#endif - .globl __HeapBase - .globl __HeapLimit -__HeapBase: - .if Heap_Size - .space Heap_Size - .endif - .size __HeapBase, . - __HeapBase -__HeapLimit: - .size __HeapLimit, . - __HeapLimit - - .section .isr_vector - .align 2 - .globl __isr_vector -__isr_vector: - .long __StackTop - .long Reset_Handler - /* Cortex-M33 interrupts */ - .long NMI_Handler - .long HardFault_Handler - .long MemoryManagement_Handler - .long BusFault_Handler - .long UsageFault_Handler - .long SecureFault_Handler - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long SVC_Handler - .long DebugMonitor_Handler - .long 0 /* Reserved */ - .long PendSV_Handler - .long SysTick_Handler - /* DA1469x interrupts */ - .long SENSOR_NODE_IRQHandler - .long DMA_IRQHandler - .long CHARGER_STATE_IRQHandler - .long CHARGER_ERROR_IRQHandler - .long CMAC2SYS_IRQHandler - .long UART_IRQHandler - .long UART2_IRQHandler - .long UART3_IRQHandler - .long I2C_IRQHandler - .long I2C2_IRQHandler - .long SPI_IRQHandler - .long SPI2_IRQHandler - .long PCM_IRQHandler - .long SRC_IN_IRQHandler - .long SRC_OUT_IRQHandler - .long USB_IRQHandler - .long TIMER_IRQHandler - .long TIMER2_IRQHandler - .long RTC_IRQHandler - .long KEY_WKUP_GPIO_IRQHandler - .long PDC_IRQHandler - .long VBUS_IRQHandler - .long MRM_IRQHandler - .long MOTOR_CONTROLLER_IRQHandler - .long TRNG_IRQHandler - .long DCDC_IRQHandler - .long XTAL32M_RDY_IRQHandler - .long ADC_IRQHandler - .long ADC2_IRQHandler - .long CRYPTO_IRQHandler - .long CAPTIMER1_IRQHandler - .long RFDIAG_IRQHandler - .long LCD_CONTROLLER_IRQHandler - .long PLL_LOCK_IRQHandler - .long TIMER3_IRQHandler - .long TIMER4_IRQHandler - .long LRA_IRQHandler - .long RTC_EVENT_IRQHandler - .long GPIO_P0_IRQHandler - .long GPIO_P1_IRQHandler - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .size __isr_vector, . - __isr_vector - - .text - .thumb - .thumb_func - .align 2 - .globl Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - /* Make sure interrupt vector is remapped at 0x0 */ - ldr r1, =SYS_CTRL_REG - ldrh r2, [r1, #0] - orrs r2, r2, #8 - strh r2, [r1, #0] - -#if !MYNEWT_VAL(RAM_RESIDENT) -/* - * Flash is remapped at 0x0 with an offset, i.e. 0x0 does not correspond to - * 0x16000000 but to start of an image on flash. This is calculated from product - * header by 1st state bootloader and configured in CACHE_FLASH_REG. We need to - * retrieve proper offset value for calculations later. - */ - ldr r1, =CACHE_FLASH_REG - ldr r4, [r1, #0] - mov r2, r4 - mov r3, #0xFFFF - bic r4, r4, r3 /* CACHE_FLASH_REG[FLASH_REGION_BASE] */ - mov r3, #0xFFF0 - and r2, r2, r3 /* CACHE_FLASH_REG[FLASH_REGION_OFFSET] */ - lsr r2, r2, #2 - orr r4, r4, r2 - -/* Copy ISR vector from flash to RAM */ - ldr r1, =__isr_vector_start /* src ptr */ - ldr r2, =__isr_vector_end /* src end */ - ldr r3, =__intvect_start__ /* dst ptr */ -/* Make sure we copy from QSPIC address range, not from remapped range */ - cmp r1, r4 - itt lt - addlt r1, r1, r4 - addlt r2, r2, r4 -.loop_isr_copy: - cmp r1, r2 - ittt lt - ldrlt r0, [r1], #4 - strlt r0, [r3], #4 - blt .loop_isr_copy - -/* Copy QSPI code from flash to RAM */ - ldr r1, =__text_ram_addr /* src ptr */ - ldr r2, =__text_ram_start__ /* ptr */ - ldr r3, =__text_ram_end__ /* dst end */ -.loop_code_text_ram_copy: - cmp r2, r3 - ittt lt - ldrlt r0, [r1], #4 - strlt r0, [r2], #4 - blt .loop_code_text_ram_copy - -/* Copy data from flash to RAM */ - ldr r1, =__etext /* src ptr */ - ldr r2, =__data_start__ /* dst ptr */ - ldr r3, =__data_end__ /* dst end */ -.loop_data_copy: - cmp r2, r3 - ittt lt - ldrlt r0, [r1], #4 - strlt r0, [r2], #4 - blt .loop_data_copy -#endif - -/* Clear BSS */ - movs r0, 0 - ldr r1, =__bss_start__ - ldr r2, =__bss_end__ -.loop_bss_clear: - cmp r1, r2 - itt lt - strlt r0, [r1], #4 - blt .loop_bss_clear - - ldr r0, =__HeapBase - ldr r1, =__HeapLimit -/* Call static constructors */ - bl __libc_init_array - - bl SystemInit - bl main - - .pool - .size Reset_Handler, . - Reset_Handler - -/* Default interrupt handler */ - .type Default_Handler, %function -Default_Handler: - ldr r1, =SYS_CTRL_REG - ldrh r2, [r1, #0] - orrs r2, r2, #0x80 /* DEBUGGER_ENABLE */ - strh r2, [r1, #0] - b . - - .size Default_Handler, . - Default_Handler - -/* Default handlers for all interrupts */ - .macro IRQ handler - .weak \handler - .set \handler, Default_Handler - .endm - - /* Cortex-M33 interrupts */ - IRQ NMI_Handler - IRQ HardFault_Handler - IRQ MemoryManagement_Handler - IRQ BusFault_Handler - IRQ UsageFault_Handler - IRQ SecureFault_Handler - IRQ SVC_Handler - IRQ DebugMonitor_Handler - IRQ PendSV_Handler - IRQ SysTick_Handler - /* DA1469x interrupts */ - IRQ SENSOR_NODE_IRQHandler - IRQ DMA_IRQHandler - IRQ CHARGER_STATE_IRQHandler - IRQ CHARGER_ERROR_IRQHandler - IRQ CMAC2SYS_IRQHandler - IRQ UART_IRQHandler - IRQ UART2_IRQHandler - IRQ UART3_IRQHandler - IRQ I2C_IRQHandler - IRQ I2C2_IRQHandler - IRQ SPI_IRQHandler - IRQ SPI2_IRQHandler - IRQ PCM_IRQHandler - IRQ SRC_IN_IRQHandler - IRQ SRC_OUT_IRQHandler - IRQ USB_IRQHandler - IRQ TIMER_IRQHandler - IRQ TIMER2_IRQHandler - IRQ RTC_IRQHandler - IRQ KEY_WKUP_GPIO_IRQHandler - IRQ PDC_IRQHandler - IRQ VBUS_IRQHandler - IRQ MRM_IRQHandler - IRQ MOTOR_CONTROLLER_IRQHandler - IRQ TRNG_IRQHandler - IRQ DCDC_IRQHandler - IRQ XTAL32M_RDY_IRQHandler - IRQ ADC_IRQHandler - IRQ ADC2_IRQHandler - IRQ CRYPTO_IRQHandler - IRQ CAPTIMER1_IRQHandler - IRQ RFDIAG_IRQHandler - IRQ LCD_CONTROLLER_IRQHandler - IRQ PLL_LOCK_IRQHandler - IRQ TIMER3_IRQHandler - IRQ TIMER4_IRQHandler - IRQ LRA_IRQHandler - IRQ RTC_EVENT_IRQHandler - IRQ GPIO_P0_IRQHandler - IRQ GPIO_P1_IRQHandler - IRQ RESERVED40_IRQHandler - IRQ RESERVED41_IRQHandler - IRQ RESERVED42_IRQHandler - IRQ RESERVED43_IRQHandler - IRQ RESERVED44_IRQHandler - IRQ RESERVED45_IRQHandler - IRQ RESERVED46_IRQHandler - IRQ RESERVED47_IRQHandler - -.end diff --git a/tinyusb/hw/bsp/da1469x_dk_pro/product_header.dump b/tinyusb/hw/bsp/da1469x_dk_pro/product_header.dump Binary files differdeleted file mode 100755 index ea484224..00000000 --- a/tinyusb/hw/bsp/da1469x_dk_pro/product_header.dump +++ /dev/null diff --git a/tinyusb/hw/bsp/da1469x_dk_pro/syscfg/syscfg.h b/tinyusb/hw/bsp/da1469x_dk_pro/syscfg/syscfg.h deleted file mode 100755 index 6cbb4319..00000000 --- a/tinyusb/hw/bsp/da1469x_dk_pro/syscfg/syscfg.h +++ /dev/null @@ -1,34 +0,0 @@ -/** - * This file was generated by Apache newt version: 1.9.0-dev - */ - -#ifndef H_MYNEWT_SYSCFG_ -#define H_MYNEWT_SYSCFG_ - -/** - * This macro exists to ensure code includes this header when needed. If code - * checks the existence of a setting directly via ifdef without including this - * header, the setting macro will silently evaluate to 0. In contrast, an - * attempt to use these macros without including this header will result in a - * compiler error. - */ -#define MYNEWT_VAL(_name) MYNEWT_VAL_ ## _name -#define MYNEWT_VAL_CHOICE(_name, _val) MYNEWT_VAL_ ## _name ## __ ## _val - -#ifndef MYNEWT_VAL_RAM_RESIDENT -#define MYNEWT_VAL_RAM_RESIDENT (0) -#endif - -#ifndef MYNEWT_VAL_MCU_GPIO_MAX_IRQ -#define MYNEWT_VAL_MCU_GPIO_MAX_IRQ (4) -#endif - -#ifndef MYNEWT_VAL_MCU_GPIO_RETAINABLE_NUM -#define MYNEWT_VAL_MCU_GPIO_RETAINABLE_NUM (-1) -#endif - -#ifndef MYNEWT_VAL_MCU_CLOCK_XTAL32M_SETTLE_TIME_US -#define MYNEWT_VAL_MCU_CLOCK_XTAL32M_SETTLE_TIME_US (2000) -#endif - -#endif diff --git a/tinyusb/hw/bsp/ea4088qs/board.mk b/tinyusb/hw/bsp/ea4088qs/board.mk deleted file mode 100755 index c624a5cf..00000000 --- a/tinyusb/hw/bsp/ea4088qs/board.mk +++ /dev/null @@ -1,46 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib \ - -DCORE_M4 \ - -D__USE_LPCOPEN \ - -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \ - -DCFG_TUSB_MCU=OPT_MCU_LPC40XX - -# mcu driver cause following warnings -CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc40xx/lpc_chip_40xx - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/lpc4088.ld - -SRC_C += \ - src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc40xx.c \ - $(MCU_DIR)/src/chip_17xx_40xx.c \ - $(MCU_DIR)/src/clock_17xx_40xx.c \ - $(MCU_DIR)/src/gpio_17xx_40xx.c \ - $(MCU_DIR)/src/iocon_17xx_40xx.c \ - $(MCU_DIR)/src/sysctl_17xx_40xx.c \ - $(MCU_DIR)/src/sysinit_17xx_40xx.c \ - $(MCU_DIR)/src/uart_17xx_40xx.c \ - $(MCU_DIR)/src/fpu_init.c - -INC += \ - $(TOP)/$(MCU_DIR)/inc - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = LPC4088 - -# flash using jlink -flash: flash-jlink diff --git a/tinyusb/hw/bsp/ea4088qs/ea4088qs.c b/tinyusb/hw/bsp/ea4088qs/ea4088qs.c deleted file mode 100755 index b25f9101..00000000 --- a/tinyusb/hw/bsp/ea4088qs/ea4088qs.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "../board.h" - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) -{ - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST - tuh_int_handler(0); - #endif - - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - tud_int_handler(0); - #endif -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ -#define LED_PORT 2 -#define LED_PIN 19 - -#define BUTTON_PORT 2 -#define BUTTON_PIN 10 - -/* System oscillator rate and RTC oscillator rate */ -const uint32_t OscRateIn = 12000000; -const uint32_t RTCOscRateIn = 32768; - -/* Pin muxing configuration */ -static const PINMUX_GRP_T pinmuxing[] = -{ - // LED - {2, 19, (IOCON_FUNC0 | IOCON_MODE_INACT)}, - - // Button - {2, 10, (IOCON_FUNC0 | IOCON_MODE_INACT | IOCON_MODE_PULLUP)}, -}; - -static const PINMUX_GRP_T pin_usb_mux[] = -{ - // USB1 as Host - {0, 29, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // D+1 - {0, 30, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // D-1 - {1, 18, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // UP LED1 - {1, 19, (IOCON_FUNC2 | IOCON_MODE_INACT)}, // PPWR1 -// {2, 14, (IOCON_FUNC2 | IOCON_MODE_INACT)}, // VBUS1 -// {2, 15, (IOCON_FUNC2 | IOCON_MODE_INACT)}, // OVRCR1 - - // USB2 as Device - {0, 31, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // D+2 - {0, 13, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // UP LED - {0, 14, (IOCON_FUNC3 | IOCON_MODE_INACT)}, // CONNECT2 - - /* VBUS is not connected on this board, so leave the pin at default setting. */ - /*Chip_IOCON_PinMux(LPC_IOCON, 1, 30, IOCON_MODE_INACT, IOCON_FUNC2);*/ /* USB VBUS */ -}; - -// Invoked by startup code -void SystemInit(void) -{ -#ifdef __USE_LPCOPEN - extern void (* const g_pfnVectors[])(void); - unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; - *pSCB_VTOR = (unsigned int) g_pfnVectors; - -#if __FPU_USED == 1 - fpuInit(); -#endif -#endif // __USE_LPCOPEN - - Chip_IOCON_Init(LPC_IOCON); - Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - - /* CPU clock source starts with IRC */ - /* Enable PBOOST for CPU clock over 100MHz */ - Chip_SYSCTL_EnableBoost(); - - Chip_SetupXtalClocking(); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - Chip_GPIO_Init(LPC_GPIO); - - // LED - Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); - - // UART - - //------------- USB -------------// - Chip_IOCON_SetPinMuxing(LPC_IOCON, pin_usb_mux, sizeof(pin_usb_mux) / sizeof(PINMUX_GRP_T)); - - // Port1 as Host, Port2: Device - Chip_USB_Init(); - - enum { - USBCLK_DEVCIE = 0x12, // AHB + Device - USBCLK_HOST = 0x19 , // AHB + OTG + Host - USBCLK_ALL = 0x1B // Host + Device + OTG + AHB - }; - - LPC_USB->OTGClkCtrl = USBCLK_ALL; - while ( (LPC_USB->OTGClkSt & USBCLK_ALL) != USBCLK_ALL ) {} - - // set portfunc: USB1 = host, USB2 = device - LPC_USB->StCtrl = 0x3; -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - // active low - return Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; -} - -int board_uart_read(uint8_t* buf, int len) -{ - //return UART_ReceiveByte(BOARD_UART_PORT); - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - //UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING); - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/tinyusb/hw/bsp/ea4088qs/lpc4088.ld b/tinyusb/hw/bsp/ea4088qs/lpc4088.ld deleted file mode 100755 index 4b1cddd6..00000000 --- a/tinyusb/hw/bsp/ea4088qs/lpc4088.ld +++ /dev/null @@ -1,184 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * (c) Code Red Technologies Ltd, 2008-2013 - * (c) NXP Semiconductors 2013-2019 - * Generated linker script file for LPC4088 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 15, 2019 5:16:07 PM - */ - -MEMORY -{ - /* Define each memory region */ - MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - RamLoc64 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x10000 /* 64K bytes (alias RAM) */ - RamPeriph32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ -} - - /* Define a symbol for the top of each memory region */ - __base_MFlash512 = 0x0 ; /* MFlash512 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ - __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ - __base_RamLoc64 = 0x10000000 ; /* RamLoc64 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc64 = 0x10000000 + 0x10000 ; /* 64K bytes */ - __top_RAM = 0x10000000 + 0x10000 ; /* 64K bytes */ - __base_RamPeriph32 = 0x20000000 ; /* RamPeriph32 */ - __base_RAM2 = 0x20000000 ; /* RAM2 */ - __top_RamPeriph32 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __top_RAM2 = 0x20000000 + 0x8000 ; /* 32K bytes */ - -ENTRY(ResetISR) - -SECTIONS -{ - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlash512 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlash512 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlash512 - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > MFlash512 - __exidx_end = .; - - _etext = .; - - /* DATA section for RamPeriph32 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamPeriph32) - *(.data.$RAM2*) - *(.data.$RamPeriph32*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > RamPeriph32 AT>MFlash512 - /* MAIN DATA SECTION */ - .uninit_RESERVED : ALIGN(4) - { - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc64 - - /* Main DATA section (RamLoc64) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > RamLoc64 AT>MFlash512 - - /* BSS section for RamPeriph32 */ - .bss_RAM2 : ALIGN(4) - { - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2*) - *(.bss.$RamPeriph32*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > RamPeriph32 - - /* MAIN BSS SECTION */ - .bss : ALIGN(4) - { - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > RamLoc64 - - /* NOINIT section for RamPeriph32 */ - .noinit_RAM2 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM2*) - *(.noinit.$RamPeriph32*) - . = ALIGN(4) ; - } > RamPeriph32 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): ALIGN(4) - { - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > RamLoc64 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc64 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/ea4357/board.mk b/tinyusb/hw/bsp/ea4357/board.mk deleted file mode 100755 index 86391ab5..00000000 --- a/tinyusb/hw/bsp/ea4357/board.mk +++ /dev/null @@ -1,46 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib \ - -DCORE_M4 \ - -D__USE_LPCOPEN \ - -DCFG_TUSB_MCU=OPT_MCU_LPC43XX - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=strict-prototypes - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc43xx/lpc_chip_43xx - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/lpc4357.ld - -SRC_C += \ - src/portable/nxp/transdimension/dcd_transdimension.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc43xx.c \ - $(MCU_DIR)/src/chip_18xx_43xx.c \ - $(MCU_DIR)/src/clock_18xx_43xx.c \ - $(MCU_DIR)/src/gpio_18xx_43xx.c \ - $(MCU_DIR)/src/sysinit_18xx_43xx.c \ - $(MCU_DIR)/src/i2c_18xx_43xx.c \ - $(MCU_DIR)/src/i2cm_18xx_43xx.c \ - $(MCU_DIR)/src/uart_18xx_43xx.c \ - $(MCU_DIR)/src/fpu_init.c - -INC += \ - $(TOP)/$(MCU_DIR)/inc \ - $(TOP)/$(MCU_DIR)/inc/config_43xx - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = LPC4357_M4 - -# flash using jlink -flash: flash-jlink diff --git a/tinyusb/hw/bsp/ea4357/ea4357.c b/tinyusb/hw/bsp/ea4357/ea4357.c deleted file mode 100755 index aa206a28..00000000 --- a/tinyusb/hw/bsp/ea4357/ea4357.c +++ /dev/null @@ -1,291 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "../board.h" -#include "pca9532.h" - -#define UART_DEV LPC_USART0 -#define UART_PORT 0x0f -#define UART_PIN_TX 10 -#define UART_PIN_RX 11 - -// P9_1 joystick down -#define BUTTON_PORT 4 -#define BUTTON_PIN 13 - -//static const struct { -// uint8_t mux_port; -// uint8_t mux_pin; -// -// uint8_t gpio_port; -// uint8_t gpio_pin; -//}buttons[] = -//{ -// {0x0a, 3, 4, 10 }, // Joystick up -// {0x09, 1, 4, 13 }, // Joystick down -// {0x0a, 2, 4, 9 }, // Joystick left -// {0x09, 0, 4, 12 }, // Joystick right -// {0x0a, 1, 4, 8 }, // Joystick press -// {0x02, 7, 0, 7 }, // SW6 -//}; - -/*------------------------------------------------------------------*/ -/* BOARD API - *------------------------------------------------------------------*/ - -/* System configuration variables used by chip driver */ -const uint32_t OscRateIn = 12000000; -const uint32_t ExtRateIn = 0; - -static const PINMUX_GRP_T pinmuxing[] = -{ - // Button ( Joystick down ) - {0x9, 1, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLUP)}, - - // UART - {UART_PORT, UART_PIN_TX, SCU_MODE_PULLDOWN | SCU_MODE_FUNC1}, - {UART_PORT, UART_PIN_RX, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC1}, - - // USB -}; - -/* Pin clock mux values, re-used structure, value in first index is meaningless */ -static const PINMUX_GRP_T pinclockmuxing[] = -{ - {0, 0, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - {0, 1, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - {0, 2, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - {0, 3, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, -}; - -// Invoked by startup code -void SystemInit(void) -{ -#ifdef __USE_LPCOPEN - extern void (* const g_pfnVectors[])(void); - unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; - *pSCB_VTOR = (unsigned int) g_pfnVectors; - -#if __FPU_USED == 1 - fpuInit(); -#endif -#endif // __USE_LPCOPEN - - /* Setup system level pin muxing */ - Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - - /* Clock pins only, group field not used */ - for (int i = 0; i <(int) (sizeof(pinclockmuxing) / sizeof(pinclockmuxing[0])); i++) - { - Chip_SCU_ClockPinMuxSet(pinclockmuxing[i].pinnum, pinclockmuxing[i].modefunc); - } - - Chip_SetupXtalClocking(); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - Chip_GPIO_Init(LPC_GPIO_PORT); - - // LED via pca9532 I2C - Chip_SCU_I2C0PinConfig(I2C0_STANDARD_FAST_MODE); - Chip_I2C_Init(I2C0); - Chip_I2C_SetClockRate(I2C0, 100000); - Chip_I2C_SetMasterEventHandler(I2C0, Chip_I2C_EventHandlerPolling); - - pca9532_init(); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); - - //------------- UART -------------// - Chip_UART_Init(UART_DEV); - Chip_UART_SetBaud(UART_DEV, CFG_BOARD_UART_BAUDRATE); - Chip_UART_ConfigData(UART_DEV, UART_LCR_WLEN8 | UART_LCR_SBS_1BIT | UART_LCR_PARITY_DIS); - Chip_UART_TXEnable(UART_DEV); - - //------------- USB -------------// - enum { - USBMODE_DEVICE = 2, - USBMODE_HOST = 3 - }; - - enum { - USBMODE_VBUS_LOW = 0, - USBMODE_VBUS_HIGH = 1 - }; - - /* From EA4357 user manual - * - * USB0 Device operation: - * - Insert jumpers in position 1-2 in JP17/JP18/JP19. - * - GPIO28 controls USB connect functionality - * - LED32 lights when the USB Device is connected. SJ4 has pads 1-2 shorted by default. - * - LED33 is controlled by GPIO27 and signals USB-up state. GPIO54 is used for VBUS - * sensing. - * - * USB0 Host operation: - * - insert jumpers in position 2-3 in JP17/JP18/JP19. - * - USB Host power is controlled via distribution switch U20 (found in schematic page 11). - * - Signal GPIO26 is active low and enables +5V on VBUS2. - * - LED35 light whenever +5V is present on VBUS2. - * - GPIO55 is connected to status feedback from the distribution switch. - * - GPIO54 is used for VBUS sensing. 15Kohm pull-down resistors are always active - * - * Note: - * - Insert jumpers in position 2-3 in JP17/JP18/JP19 - * - Insert jumpers in JP31 (OTG) - */ -#if CFG_TUSB_RHPORT0_MODE - Chip_USB0_Init(); -#endif - - /* From EA4357 user manual - * - * For USB1 Device: - * - a 1.5Kohm pull-up resistor is needed on the USB DP data signal. There are two methods to create this. - * JP15 is inserted and the pull-up resistor is always enabled. Alternatively, the pull-up resistor is activated - * inside the USB OTG chip (U31), and this has to be done via the I2C interface of GPIO52/GPIO53. In the latter case, - * JP15 shall not be inserted. - * - J19 is the connector to use when USB Device is used. Normally it should be a USB-B connector for - * creating a USB Device interface, but the mini-AB connector can also be used in this case. The status - * of VBUS can be read via U31. - * - JP16 shall not be inserted. - * - * For USB1 Host: - * - 15Kohm pull-down resistors are needed on the USB data signals. These are activated inside the USB OTG chip (U31), - * and this has to be done via the I2C interface of GPIO52/GPIO53. - * - J20 is the connector to use when USB Host is used. In order to provide +5V to the external USB - * device connected to this connector (J20), channel A of U20 must be enabled. It is enabled by default - * since SJ5 is normally connected between pin 1-2. - * - LED34 lights green when +5V is available on J20. - * - JP15 shall not be inserted. JP16 has no effect - */ -#if CFG_TUSB_RHPORT1_MODE - Chip_USB1_Init(); -#endif - - // USB0 Vbus Power: P2_3 on EA4357 channel B U20 GPIO26 active low (base board) - Chip_SCU_PinMuxSet(2, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC7); - - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - // P9_5 (GPIO5[18]) (GPIO28 on oem base) as USB connect, active low. - Chip_SCU_PinMuxSet(9, 5, SCU_MODE_PULLDOWN | SCU_MODE_FUNC4); - Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, 5, 18); - #endif - - // USB1 Power: EA4357 channel A U20 is enabled by SJ5 connected to pad 1-2, no more action required - // TODO Remove R170, R171, solder a pair of 15K to USB1 D+/D- to test with USB1 Host -} - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST - tuh_int_handler(0); - #endif - - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - tud_int_handler(0); - #endif -} - -void USB1_IRQHandler(void) -{ - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST - tuh_int_handler(1); - #endif - - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE - tud_int_handler(1); - #endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - if (state) - { - pca9532_setLeds( LED1, 0 ); - }else - { - pca9532_setLeds( 0, LED1); - } -} - -uint32_t board_button_read(void) -{ - // active low - return Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; -} - -int board_uart_read(uint8_t* buf, int len) -{ - //return UART_ReceiveByte(BOARD_UART_DEV); - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - uint8_t const* buf8 = (uint8_t const*) buf; - for(int i=0; i<len; i++) - { - while ((Chip_UART_ReadLineStatus(UART_DEV) & UART_LSR_THRE) == 0) {} - Chip_UART_SendByte(UART_DEV, buf8[i]); - } - - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/tinyusb/hw/bsp/ea4357/lpc4357.ld b/tinyusb/hw/bsp/ea4357/lpc4357.ld deleted file mode 100755 index 14a0df32..00000000 --- a/tinyusb/hw/bsp/ea4357/lpc4357.ld +++ /dev/null @@ -1,324 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * (c) Code Red Technologies Ltd, 2008-2013 - * (c) NXP Semiconductors 2013-2019 - * Generated linker script file for LPC4357 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 15, 2019 5:48:43 PM - */ - -MEMORY -{ - /* Define each memory region */ - MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ - RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ - RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ - RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ -} - - /* Define a symbol for the top of each memory region */ - __base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ - __base_Flash = 0x1a000000 ; /* Flash */ - __top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ - __top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ - __base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ - __base_Flash2 = 0x1b000000 ; /* Flash2 */ - __top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ - __top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ - __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ - __base_RAM2 = 0x10080000 ; /* RAM2 */ - __top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ - __top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ - __base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ - __base_RAM3 = 0x20000000 ; /* RAM3 */ - __top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ - __base_RAM4 = 0x20008000 ; /* RAM4 */ - __top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ - __base_RAM5 = 0x2000c000 ; /* RAM5 */ - __top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - - -ENTRY(ResetISR) - -SECTIONS -{ - .text_Flash2 : ALIGN(4) - { - FILL(0xff) - *(.text_Flash2*) /* for compatibility with previous releases */ - *(.text_MFlashB512*) /* for compatibility with previous releases */ - *(.text.$Flash2*) - *(.text.$MFlashB512*) - *(.rodata.$Flash2*) - *(.rodata.$MFlashB512*) - } > MFlashB512 - - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - LONG(LOADADDR(.data_RAM3)); - LONG( ADDR(.data_RAM3)); - LONG( SIZEOF(.data_RAM3)); - LONG(LOADADDR(.data_RAM4)); - LONG( ADDR(.data_RAM4)); - LONG( SIZEOF(.data_RAM4)); - LONG(LOADADDR(.data_RAM5)); - LONG( ADDR(.data_RAM5)); - LONG( SIZEOF(.data_RAM5)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - LONG( ADDR(.bss_RAM3)); - LONG( SIZEOF(.bss_RAM3)); - LONG( ADDR(.bss_RAM4)); - LONG( SIZEOF(.bss_RAM4)); - LONG( ADDR(.bss_RAM5)); - LONG( SIZEOF(.bss_RAM5)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlashA512 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlashA512 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlashA512 - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > MFlashA512 - __exidx_end = .; - - _etext = .; - - /* DATA section for RamLoc40 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamLoc40) - *(.data.$RAM2*) - *(.data.$RamLoc40*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > RamLoc40 AT>MFlashA512 - /* DATA section for RamAHB32 */ - - .data_RAM3 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM3 = .) ; - *(.ramfunc.$RAM3) - *(.ramfunc.$RamAHB32) - *(.data.$RAM3*) - *(.data.$RamAHB32*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM3 = .) ; - } > RamAHB32 AT>MFlashA512 - /* DATA section for RamAHB16 */ - - .data_RAM4 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM4 = .) ; - *(.ramfunc.$RAM4) - *(.ramfunc.$RamAHB16) - *(.data.$RAM4*) - *(.data.$RamAHB16*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM4 = .) ; - } > RamAHB16 AT>MFlashA512 - /* DATA section for RamAHB_ETB16 */ - - .data_RAM5 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM5 = .) ; - *(.ramfunc.$RAM5) - *(.ramfunc.$RamAHB_ETB16) - *(.data.$RAM5*) - *(.data.$RamAHB_ETB16*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM5 = .) ; - } > RamAHB_ETB16 AT>MFlashA512 - /* MAIN DATA SECTION */ - .uninit_RESERVED : ALIGN(4) - { - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc32 - - /* Main DATA section (RamLoc32) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > RamLoc32 AT>MFlashA512 - - /* BSS section for RamLoc40 */ - .bss_RAM2 : ALIGN(4) - { - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2*) - *(.bss.$RamLoc40*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > RamLoc40 - - /* BSS section for RamAHB32 */ - .bss_RAM3 : ALIGN(4) - { - PROVIDE(__start_bss_RAM3 = .) ; - *(.bss.$RAM3*) - *(.bss.$RamAHB32*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM3 = .) ; - } > RamAHB32 - - /* BSS section for RamAHB16 */ - .bss_RAM4 : ALIGN(4) - { - PROVIDE(__start_bss_RAM4 = .) ; - *(.bss.$RAM4*) - *(.bss.$RamAHB16*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM4 = .) ; - } > RamAHB16 - - /* BSS section for RamAHB_ETB16 */ - .bss_RAM5 : ALIGN(4) - { - PROVIDE(__start_bss_RAM5 = .) ; - *(.bss.$RAM5*) - *(.bss.$RamAHB_ETB16*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM5 = .) ; - } > RamAHB_ETB16 - - /* MAIN BSS SECTION */ - .bss : ALIGN(4) - { - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > RamLoc32 - - /* NOINIT section for RamLoc40 */ - .noinit_RAM2 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM2*) - *(.noinit.$RamLoc40*) - . = ALIGN(4) ; - } > RamLoc40 - - /* NOINIT section for RamAHB32 */ - .noinit_RAM3 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM3*) - *(.noinit.$RamAHB32*) - . = ALIGN(4) ; - } > RamAHB32 - - /* NOINIT section for RamAHB16 */ - .noinit_RAM4 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM4*) - *(.noinit.$RamAHB16*) - . = ALIGN(4) ; - } > RamAHB16 - - /* NOINIT section for RamAHB_ETB16 */ - .noinit_RAM5 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM5*) - *(.noinit.$RamAHB_ETB16*) - . = ALIGN(4) ; - } > RamAHB_ETB16 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): ALIGN(4) - { - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > RamLoc32 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/ea4357/pca9532.c b/tinyusb/hw/bsp/ea4357/pca9532.c deleted file mode 100755 index eae3805c..00000000 --- a/tinyusb/hw/bsp/ea4357/pca9532.c +++ /dev/null @@ -1,352 +0,0 @@ -/***************************************************************************** - * - * Copyright(C) 2011, Embedded Artists AB - * All rights reserved. - * - ****************************************************************************** - * Software that is described herein is for illustrative purposes only - * which provides customers with programming information regarding the - * products. This software is supplied "AS IS" without any warranties. - * Embedded Artists AB assumes no responsibility or liability for the - * use of the software, conveys no license or title under any patent, - * copyright, or mask work right to the product. Embedded Artists AB - * reserves the right to make changes in the software without - * notification. Embedded Artists AB also make no representation or - * warranty that such application will be suitable for the specified - * use without further testing or modification. - *****************************************************************************/ - -/* - * NOTE: I2C must have been initialized before calling any functions in this - * file. - */ - -/****************************************************************************** - * Includes - *****************************************************************************/ - -//#include "board.h" -#include "chip.h" - -#include "pca9532.h" - -/****************************************************************************** - * Defines and typedefs - *****************************************************************************/ - -#define I2C_PORT (LPC_I2C0) - -#define LS_MODE_ON 0x01 -#define LS_MODE_BLINK0 0x02 -#define LS_MODE_BLINK1 0x03 - -/****************************************************************************** - * External global variables - *****************************************************************************/ - - -/****************************************************************************** - * Local variables - *****************************************************************************/ - -static uint16_t blink0Shadow = 0; -static uint16_t blink1Shadow = 0; -static uint16_t ledStateShadow = 0; - -/****************************************************************************** - * Local Functions - *****************************************************************************/ - -static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len) -{ - I2CM_XFER_T i2cData; - - i2cData.slaveAddr = addr; - i2cData.options = 0; - i2cData.status = 0; - i2cData.txBuff = buf; - i2cData.txSz = len; - i2cData.rxBuff = NULL; - i2cData.rxSz = 0; - - if (Chip_I2CM_XferBlocking(LPC_I2C0, &i2cData) == 0) { - return ERROR; - } - return SUCCESS; -} - -static Status I2CRead(uint32_t addr, uint8_t* buf, uint32_t len) -{ - I2CM_XFER_T i2cData; - - i2cData.slaveAddr = addr; - i2cData.options = 0; - i2cData.status = 0; - i2cData.txBuff = NULL; - i2cData.txSz = 0; - i2cData.rxBuff = buf; - i2cData.rxSz = len; - - if (Chip_I2CM_XferBlocking(LPC_I2C0, &i2cData) == 0) { - return ERROR; - } - return SUCCESS; -} - -static void setLsStates(uint16_t states, uint8_t* ls, uint8_t mode) -{ -#define IS_LED_SET(bit, x) ( ( ((x) & (bit)) != 0 ) ? 1 : 0 ) - - int i = 0; - - for (i = 0; i < 4; i++) { - - ls[i] |= ( (IS_LED_SET(0x0001, states)*mode << 0) - | (IS_LED_SET(0x0002, states)*mode << 2) - | (IS_LED_SET(0x0004, states)*mode << 4) - | (IS_LED_SET(0x0008, states)*mode << 6) ); - - states >>= 4; - } -} - -static void setLeds(void) -{ - uint8_t buf[5]; - uint8_t ls[4] = {0,0,0,0}; - uint16_t states = ledStateShadow; - - /* LEDs in On/Off state */ - setLsStates(states, ls, LS_MODE_ON); - - /* set the LEDs that should blink */ - setLsStates(blink0Shadow, ls, LS_MODE_BLINK0); - setLsStates(blink1Shadow, ls, LS_MODE_BLINK1); - - - buf[0] = PCA9532_LS0 | PCA9532_AUTO_INC; - buf[1] = ls[0]; - buf[2] = ls[1]; - buf[3] = ls[2]; - buf[4] = ls[3]; - I2CWrite(PCA9532_I2C_ADDR, buf, 5); -} - -/****************************************************************************** - * Public Functions - *****************************************************************************/ - -/****************************************************************************** - * - * Description: - * Initialize the PCA9532 Device - * - *****************************************************************************/ -void pca9532_init (void) -{ - /* nothing to initialize */ -} - -/****************************************************************************** - * - * Description: - * Get the LED states - * - * Params: - * [in] shadow - TRUE if the states should be retrieved from the shadow - * variables. The shadow variable are updated when any - * of setLeds, setBlink0Leds and/or setBlink1Leds are - * called. - * - * FALSE if the state should be retrieved from the PCA9532 - * device. A blinkin LED may be reported as on or off - * depending on the state when calling the function. - * - * Returns: - * A mask where a 1 indicates that a LED is on (or blinking). - * - *****************************************************************************/ -uint16_t pca9532_getLedState (uint32_t shadow) -{ - uint8_t buf[2]; - uint16_t ret = 0; - - if (shadow) { - /* a blink LED is reported as on*/ - ret = (ledStateShadow | blink0Shadow | blink1Shadow); - } - else { - - /* - * A blinking LED may be reported as on or off depending on - * its state when reading the Input register. - */ - - buf[0] = PCA9532_INPUT0; - I2CWrite(PCA9532_I2C_ADDR, buf, 1); - - I2CRead(PCA9532_I2C_ADDR, buf, 1); - ret = buf[0]; - - - buf[0] = PCA9532_INPUT1; - I2CWrite(PCA9532_I2C_ADDR, buf, 1); - - I2CRead(PCA9532_I2C_ADDR, buf, 1); - ret |= (buf[0] << 8); - - - /* invert since LEDs are active low */ - ret = ((~ret) & 0xFFFF); - } - - return (ret & ~PCA9532_NOT_USED); -} - - -/****************************************************************************** - * - * Description: - * Set LED states (on or off). - * - * Params: - * [in] ledOnMask - The LEDs that should be turned on. This mask has - * priority over ledOffMask - * [in] ledOffMask - The LEDs that should be turned off. - * - *****************************************************************************/ -void pca9532_setLeds (uint16_t ledOnMask, uint16_t ledOffMask) -{ - /* turn off leds */ - ledStateShadow &= (~(ledOffMask) & 0xffff); - - /* ledOnMask has priority over ledOffMask */ - ledStateShadow |= ledOnMask; - - /* turn off blinking */ - blink0Shadow &= (~(ledOffMask) & 0xffff); - blink1Shadow &= (~(ledOffMask) & 0xffff); - - setLeds(); -} - -/****************************************************************************** - * - * Description: - * Set the blink period for PWM0. Valid values are 0 - 255 where 0 - * means 152 Hz and 255 means 0.59 Hz. A value of 151 means 1 Hz. - * - * Params: - * [in] period - the period for pwm0 - * - *****************************************************************************/ -void pca9532_setBlink0Period(uint8_t period) -{ - uint8_t buf[2]; - - buf[0] = PCA9532_PSC0; - buf[1] = period; - I2CWrite(PCA9532_I2C_ADDR, buf, 2); -} - -/****************************************************************************** - * - * Description: - * Set the duty cycle for PWM0. Valid values are 0 - 100. 25 means the LED - * is on 25% of the period. - * - * Params: - * [in] duty - duty cycle - * - *****************************************************************************/ -void pca9532_setBlink0Duty(uint8_t duty) -{ - uint8_t buf[2]; - uint32_t tmp = duty; - if (tmp > 100) { - tmp = 100; - } - - tmp = (256 * tmp)/100; - - buf[0] = PCA9532_PWM0; - buf[1] = tmp; - I2CWrite(PCA9532_I2C_ADDR, buf, 2); -} - -/****************************************************************************** - * - * Description: - * Set the LEDs that should blink with rate and duty cycle from PWM0. - * Blinking is turned off with pca9532_setLeds. - * - * Params: - * [in] ledMask - LEDs that should blink. - * - *****************************************************************************/ -void pca9532_setBlink0Leds(uint16_t ledMask) -{ - blink0Shadow |= ledMask; - setLeds(); -} - -/****************************************************************************** - * - * Description: - * Set the blink period for PWM1. Valid values are 0 - 255 where 0 - * means 152 Hz and 255 means 0.59 Hz. A value of 151 means 1 Hz. - * - * Params: - * [in] period - The period for PWM1 - * - *****************************************************************************/ -void pca9532_setBlink1Period(uint8_t period) -{ - uint8_t buf[2]; - - buf[0] = PCA9532_PSC1; - buf[1] = period; - I2CWrite(PCA9532_I2C_ADDR, buf, 2); -} - -/****************************************************************************** - * - * Description: - * Set the duty cycle for PWM1. Valid values are 0 - 100. 25 means the LED - * is on 25% of the period. - * - * Params: - * [in] duty - duty cycle. - * - *****************************************************************************/ -void pca9532_setBlink1Duty(uint8_t duty) -{ - uint8_t buf[2]; - - uint32_t tmp = duty; - if (tmp > 100) { - tmp = 100; - } - - tmp = (256 * tmp)/100; - - buf[0] = PCA9532_PWM1; - buf[1] = tmp; - I2CWrite(PCA9532_I2C_ADDR, buf, 2); -} - -/****************************************************************************** - * - * Description: - * Set the LEDs that should blink with rate and duty cycle from PWM1. - * Blinking is turned off with pca9532_setLeds. - * - * Params: - * [in] ledMask - LEDs that should blink. - * - *****************************************************************************/ -void pca9532_setBlink1Leds(uint16_t ledMask) -{ - blink1Shadow |= ledMask; - setLeds(); -} diff --git a/tinyusb/hw/bsp/ea4357/pca9532.h b/tinyusb/hw/bsp/ea4357/pca9532.h deleted file mode 100755 index 7a7c6e14..00000000 --- a/tinyusb/hw/bsp/ea4357/pca9532.h +++ /dev/null @@ -1,94 +0,0 @@ -/***************************************************************************** - * - * Copyright(C) 2011, Embedded Artists AB - * All rights reserved. - * - ****************************************************************************** - * Software that is described herein is for illustrative purposes only - * which provides customers with programming information regarding the - * products. This software is supplied "AS IS" without any warranties. - * Embedded Artists AB assumes no responsibility or liability for the - * use of the software, conveys no license or title under any patent, - * copyright, or mask work right to the product. Embedded Artists AB - * reserves the right to make changes in the software without - * notification. Embedded Artists AB also make no representation or - * warranty that such application will be suitable for the specified - * use without further testing or modification. - *****************************************************************************/ -#ifndef __PCA9532C_H -#define __PCA9532C_H - - -#define PCA9532_I2C_ADDR (0xC0>>1) - -#define PCA9532_INPUT0 0x00 -#define PCA9532_INPUT1 0x01 -#define PCA9532_PSC0 0x02 -#define PCA9532_PWM0 0x03 -#define PCA9532_PSC1 0x04 -#define PCA9532_PWM1 0x05 -#define PCA9532_LS0 0x06 -#define PCA9532_LS1 0x07 -#define PCA9532_LS2 0x08 -#define PCA9532_LS3 0x09 - -#define PCA9532_AUTO_INC 0x10 - - -/* - * The Keys on the base board are mapped to LED0 -> LED3 on - * the PCA9532. - */ - -#define KEY1 0x0001 -#define KEY2 0x0002 -#define KEY3 0x0004 -#define KEY4 0x0008 - -#define KEY_MASK 0x000F - -/* - * MMC Card Detect and MMC Write Protect are mapped to LED4 - * and LED5 on the PCA9532. Please note that WP is active low. - */ - -#define MMC_CD 0x0010 -#define MMC_WP 0x0020 - -#define MMC_MASK 0x30 - -/* NOTE: LED6 and LED7 on PCA9532 are not connected to anything */ -#define PCA9532_NOT_USED 0xC0 - -/* - * Below are the LED constants to use when enabling/disabling a LED. - * The LED names are the names printed on the base board and not - * the names from the PCA9532 device. base_LED1 -> LED8 on PCA9532, - * base_LED2 -> LED9, and so on. - */ - -#define LED1 0x0100 -#define LED2 0x0200 -#define LED3 0x0400 -#define LED4 0x0800 -#define LED5 0x1000 -#define LED6 0x2000 -#define LED7 0x4000 -#define LED8 0x8000 - -#define LED_MASK 0xFF00 - -void pca9532_init (void); -uint16_t pca9532_getLedState (uint32_t shadow); -void pca9532_setLeds (uint16_t ledOnMask, uint16_t ledOffMask); -void pca9532_setBlink0Period(uint8_t period); -void pca9532_setBlink0Duty(uint8_t duty); -void pca9532_setBlink0Leds(uint16_t ledMask); -void pca9532_setBlink1Period(uint8_t period); -void pca9532_setBlink1Duty(uint8_t duty); -void pca9532_setBlink1Leds(uint16_t ledMask); - -#endif /* end __PCA9532C_H */ -/**************************************************************************** -** End Of File -*****************************************************************************/ diff --git a/tinyusb/hw/bsp/esp32s2/boards/CMakeLists.txt b/tinyusb/hw/bsp/esp32s2/boards/CMakeLists.txt deleted file mode 100755 index 71753012..00000000 --- a/tinyusb/hw/bsp/esp32s2/boards/CMakeLists.txt +++ /dev/null @@ -1,14 +0,0 @@ -idf_component_register(SRCS esp32s2.c - INCLUDE_DIRS "." "${BOARD}" - PRIV_REQUIRES "driver" - REQUIRES freertos src led_strip) - -# Apply board specific content -include("${BOARD}/board.cmake") - -idf_component_get_property( FREERTOS_ORIG_INCLUDE_PATH freertos ORIG_INCLUDE_PATH) -target_include_directories(${COMPONENT_TARGET} PUBLIC - "${FREERTOS_ORIG_INCLUDE_PATH}" - "${TOP}/hw" - "${TOP}/src" -) diff --git a/tinyusb/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.cmake b/tinyusb/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.cmake deleted file mode 100755 index d3396267..00000000 --- a/tinyusb/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.cmake +++ /dev/null @@ -1,17 +0,0 @@ -# Apply board specific content here -target_include_directories(${COMPONENT_LIB} PRIVATE .) - -idf_build_get_property(idf_target IDF_TARGET) - -message(STATUS "Apply ${BOARD}(${idf_target}) specific options for component: ${COMPONENT_TARGET}") - -if(NOT ${idf_target} STREQUAL "esp32s2") - message(FATAL_ERROR "Incorrect target for board ${BOARD}: $ENV{IDF_TARGET}(${idf_target}), try to clean the build first." ) -endif() - -set(IDF_TARGET "esp32s2" FORCE) - -target_compile_options(${COMPONENT_TARGET} PUBLIC - "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" - "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -)
\ No newline at end of file diff --git a/tinyusb/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.h b/tinyusb/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.h deleted file mode 100755 index 43e00901..00000000 --- a/tinyusb/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define NEOPIXEL_PIN 33 -#define NEOPIXEL_POWER_PIN 21 -#define NEOPIXEL_POWER_STATE 1 - -#define BUTTON_PIN 0 -#define BUTTON_STATE_ACTIVE 0 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.cmake b/tinyusb/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.cmake deleted file mode 100755 index d3396267..00000000 --- a/tinyusb/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.cmake +++ /dev/null @@ -1,17 +0,0 @@ -# Apply board specific content here -target_include_directories(${COMPONENT_LIB} PRIVATE .) - -idf_build_get_property(idf_target IDF_TARGET) - -message(STATUS "Apply ${BOARD}(${idf_target}) specific options for component: ${COMPONENT_TARGET}") - -if(NOT ${idf_target} STREQUAL "esp32s2") - message(FATAL_ERROR "Incorrect target for board ${BOARD}: $ENV{IDF_TARGET}(${idf_target}), try to clean the build first." ) -endif() - -set(IDF_TARGET "esp32s2" FORCE) - -target_compile_options(${COMPONENT_TARGET} PUBLIC - "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" - "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -)
\ No newline at end of file diff --git a/tinyusb/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.h b/tinyusb/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.h deleted file mode 100755 index 16e30b68..00000000 --- a/tinyusb/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define NEOPIXEL_PIN 1 -#define NEOPIXEL_POWER_PIN 21 -#define NEOPIXEL_POWER_STATE 0 - -#define BUTTON_PIN 0 -#define BUTTON_STATE_ACTIVE 0 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.cmake b/tinyusb/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.cmake deleted file mode 100755 index d5c17b9b..00000000 --- a/tinyusb/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.cmake +++ /dev/null @@ -1,17 +0,0 @@ -# Apply board specific content here -target_include_directories(${COMPONENT_LIB} PRIVATE .) - -idf_build_get_property(idf_target IDF_TARGET) - -message(STATUS "Apply ${BOARD}(${idf_target}) specific options for component: ${COMPONENT_TARGET}") - -if(NOT ${idf_target} STREQUAL "esp32s2") - message(FATAL_ERROR "Incorrect target for board ${BOARD}: (${idf_target}), try to clean the build first." ) -endif() - -set(IDF_TARGET "esp32s2" FORCE) - -target_compile_options(${COMPONENT_TARGET} PUBLIC - "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" - "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -)
\ No newline at end of file diff --git a/tinyusb/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.h b/tinyusb/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.h deleted file mode 100755 index 49a2474b..00000000 --- a/tinyusb/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define NEOPIXEL_PIN 45 - -#define BUTTON_PIN 0 -#define BUTTON_STATE_ACTIVE 0 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/esp32s2/boards/esp32s2.c b/tinyusb/hw/bsp/esp32s2/boards/esp32s2.c deleted file mode 100755 index 358c0c80..00000000 --- a/tinyusb/hw/bsp/esp32s2/boards/esp32s2.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../../board.h" -#include "board.h" - -#include "esp_rom_gpio.h" -#include "hal/gpio_ll.h" -#include "hal/usb_hal.h" -#include "soc/usb_periph.h" - -#include "driver/periph_ctrl.h" -#include "driver/rmt.h" - -#ifdef NEOPIXEL_PIN -#include "led_strip.h" -static led_strip_t *strip; -#endif - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ - -static void configure_pins(usb_hal_context_t *usb); - -// Initialize on-board peripherals : led, button, uart and USB -void board_init(void) -{ - -#ifdef NEOPIXEL_PIN - #ifdef NEOPIXEL_POWER_PIN - gpio_reset_pin(NEOPIXEL_POWER_PIN); - gpio_set_direction(NEOPIXEL_POWER_PIN, GPIO_MODE_OUTPUT); - gpio_set_level(NEOPIXEL_POWER_PIN, NEOPIXEL_POWER_STATE); - #endif - - // WS2812 Neopixel driver with RMT peripheral - rmt_config_t config = RMT_DEFAULT_CONFIG_TX(NEOPIXEL_PIN, RMT_CHANNEL_0); - config.clk_div = 2; // set counter clock to 40MHz - - rmt_config(&config); - rmt_driver_install(config.channel, 0, 0); - - led_strip_config_t strip_config = LED_STRIP_DEFAULT_CONFIG(1, (led_strip_dev_t) config.channel); - strip = led_strip_new_rmt_ws2812(&strip_config); - strip->clear(strip, 100); // off led -#endif - - // Button - gpio_pad_select_gpio(BUTTON_PIN); - gpio_set_direction(BUTTON_PIN, GPIO_MODE_INPUT); - gpio_set_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN_ONLY : GPIO_PULLUP_ONLY); - - // USB Controller Hal init - periph_module_reset(PERIPH_USB_MODULE); - periph_module_enable(PERIPH_USB_MODULE); - - usb_hal_context_t hal = { - .use_external_phy = false // use built-in PHY - }; - usb_hal_init(&hal); - configure_pins(&hal); -} - -static void configure_pins(usb_hal_context_t *usb) -{ - /* usb_periph_iopins currently configures USB_OTG as USB Device. - * Introduce additional parameters in usb_hal_context_t when adding support - * for USB Host. - */ - for (const usb_iopin_dsc_t *iopin = usb_periph_iopins; iopin->pin != -1; ++iopin) { - if ((usb->use_external_phy) || (iopin->ext_phy_only == 0)) { - esp_rom_gpio_pad_select_gpio(iopin->pin); - if (iopin->is_output) { - esp_rom_gpio_connect_out_signal(iopin->pin, iopin->func, false, false); - } else { - esp_rom_gpio_connect_in_signal(iopin->pin, iopin->func, false); - if ((iopin->pin != GPIO_FUNC_IN_LOW) && (iopin->pin != GPIO_FUNC_IN_HIGH)) { - gpio_ll_input_enable(&GPIO, iopin->pin); - } - } - esp_rom_gpio_pad_unhold(iopin->pin); - } - } - if (!usb->use_external_phy) { - gpio_set_drive_capability(USBPHY_DM_NUM, GPIO_DRIVE_CAP_3); - gpio_set_drive_capability(USBPHY_DP_NUM, GPIO_DRIVE_CAP_3); - } -} - -// Turn LED on or off -void board_led_write(bool state) -{ -#ifdef NEOPIXEL_PIN - strip->set_pixel(strip, 0, (state ? 0x88 : 0x00), 0x00, 0x00); - strip->refresh(strip, 100); -#endif -} - -// Get the current state of button -// a '1' means active (pressed), a '0' means inactive. -uint32_t board_button_read(void) -{ - return gpio_get_level(BUTTON_PIN) == BUTTON_STATE_ACTIVE; -} - -// Get characters from UART -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -// Send characters to UART -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - diff --git a/tinyusb/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.cmake b/tinyusb/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.cmake deleted file mode 100755 index d5c17b9b..00000000 --- a/tinyusb/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.cmake +++ /dev/null @@ -1,17 +0,0 @@ -# Apply board specific content here -target_include_directories(${COMPONENT_LIB} PRIVATE .) - -idf_build_get_property(idf_target IDF_TARGET) - -message(STATUS "Apply ${BOARD}(${idf_target}) specific options for component: ${COMPONENT_TARGET}") - -if(NOT ${idf_target} STREQUAL "esp32s2") - message(FATAL_ERROR "Incorrect target for board ${BOARD}: (${idf_target}), try to clean the build first." ) -endif() - -set(IDF_TARGET "esp32s2" FORCE) - -target_compile_options(${COMPONENT_TARGET} PUBLIC - "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" - "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -)
\ No newline at end of file diff --git a/tinyusb/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.h b/tinyusb/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.h deleted file mode 100755 index 6bb44f76..00000000 --- a/tinyusb/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// Note: need to insert jumper next to WS2812 pixel -#define NEOPIXEL_PIN 45 - -#define BUTTON_PIN 0 -#define BUTTON_STATE_ACTIVE 0 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/esp32s2/boards/espressif_saola_1/board.cmake b/tinyusb/hw/bsp/esp32s2/boards/espressif_saola_1/board.cmake deleted file mode 100755 index d5c17b9b..00000000 --- a/tinyusb/hw/bsp/esp32s2/boards/espressif_saola_1/board.cmake +++ /dev/null @@ -1,17 +0,0 @@ -# Apply board specific content here -target_include_directories(${COMPONENT_LIB} PRIVATE .) - -idf_build_get_property(idf_target IDF_TARGET) - -message(STATUS "Apply ${BOARD}(${idf_target}) specific options for component: ${COMPONENT_TARGET}") - -if(NOT ${idf_target} STREQUAL "esp32s2") - message(FATAL_ERROR "Incorrect target for board ${BOARD}: (${idf_target}), try to clean the build first." ) -endif() - -set(IDF_TARGET "esp32s2" FORCE) - -target_compile_options(${COMPONENT_TARGET} PUBLIC - "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" - "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -)
\ No newline at end of file diff --git a/tinyusb/hw/bsp/esp32s2/boards/espressif_saola_1/board.h b/tinyusb/hw/bsp/esp32s2/boards/espressif_saola_1/board.h deleted file mode 100755 index f450b9a8..00000000 --- a/tinyusb/hw/bsp/esp32s2/boards/espressif_saola_1/board.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// Note: On the production version (v1.2) WS2812 is connected to GPIO 18, -// however earlier revision v1.1 WS2812 is connected to GPIO 17 -#define NEOPIXEL_PIN 18 - -#define BUTTON_PIN 0 -#define BUTTON_STATE_ACTIVE 0 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/esp32s2/components/led_strip/CMakeLists.txt b/tinyusb/hw/bsp/esp32s2/components/led_strip/CMakeLists.txt deleted file mode 100755 index 6d0fcbc8..00000000 --- a/tinyusb/hw/bsp/esp32s2/components/led_strip/CMakeLists.txt +++ /dev/null @@ -1,8 +0,0 @@ -set(component_srcs "src/led_strip_rmt_ws2812.c") - -idf_component_register(SRCS "${component_srcs}" - INCLUDE_DIRS "include" - PRIV_INCLUDE_DIRS "" - PRIV_REQUIRES "driver" - REQUIRES "") - diff --git a/tinyusb/hw/bsp/esp32s2/components/led_strip/include/led_strip.h b/tinyusb/hw/bsp/esp32s2/components/led_strip/include/led_strip.h deleted file mode 100755 index a9dffc32..00000000 --- a/tinyusb/hw/bsp/esp32s2/components/led_strip/include/led_strip.h +++ /dev/null @@ -1,126 +0,0 @@ -// Copyright 2019 Espressif Systems (Shanghai) PTE LTD -// -// Licensed under the Apache License, Version 2.0 (the "License"); -// you may not use this file except in compliance with the License. -// You may obtain a copy of the License at -// -// http://www.apache.org/licenses/LICENSE-2.0 -// -// Unless required by applicable law or agreed to in writing, software -// distributed under the License is distributed on an "AS IS" BASIS, -// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -// See the License for the specific language governing permissions and -// limitations under the License. -#pragma once - -#ifdef __cplusplus -extern "C" { -#endif - -#include "esp_err.h" - -/** -* @brief LED Strip Type -* -*/ -typedef struct led_strip_s led_strip_t; - -/** -* @brief LED Strip Device Type -* -*/ -typedef void *led_strip_dev_t; - -/** -* @brief Declare of LED Strip Type -* -*/ -struct led_strip_s { - /** - * @brief Set RGB for a specific pixel - * - * @param strip: LED strip - * @param index: index of pixel to set - * @param red: red part of color - * @param green: green part of color - * @param blue: blue part of color - * - * @return - * - ESP_OK: Set RGB for a specific pixel successfully - * - ESP_ERR_INVALID_ARG: Set RGB for a specific pixel failed because of invalid parameters - * - ESP_FAIL: Set RGB for a specific pixel failed because other error occurred - */ - esp_err_t (*set_pixel)(led_strip_t *strip, uint32_t index, uint32_t red, uint32_t green, uint32_t blue); - - /** - * @brief Refresh memory colors to LEDs - * - * @param strip: LED strip - * @param timeout_ms: timeout value for refreshing task - * - * @return - * - ESP_OK: Refresh successfully - * - ESP_ERR_TIMEOUT: Refresh failed because of timeout - * - ESP_FAIL: Refresh failed because some other error occurred - * - * @note: - * After updating the LED colors in the memory, a following invocation of this API is needed to flush colors to strip. - */ - esp_err_t (*refresh)(led_strip_t *strip, uint32_t timeout_ms); - - /** - * @brief Clear LED strip (turn off all LEDs) - * - * @param strip: LED strip - * @param timeout_ms: timeout value for clearing task - * - * @return - * - ESP_OK: Clear LEDs successfully - * - ESP_ERR_TIMEOUT: Clear LEDs failed because of timeout - * - ESP_FAIL: Clear LEDs failed because some other error occurred - */ - esp_err_t (*clear)(led_strip_t *strip, uint32_t timeout_ms); - - /** - * @brief Free LED strip resources - * - * @param strip: LED strip - * - * @return - * - ESP_OK: Free resources successfully - * - ESP_FAIL: Free resources failed because error occurred - */ - esp_err_t (*del)(led_strip_t *strip); -}; - -/** -* @brief LED Strip Configuration Type -* -*/ -typedef struct { - uint32_t max_leds; /*!< Maximum LEDs in a single strip */ - led_strip_dev_t dev; /*!< LED strip device (e.g. RMT channel, PWM channel, etc) */ -} led_strip_config_t; - -/** - * @brief Default configuration for LED strip - * - */ -#define LED_STRIP_DEFAULT_CONFIG(number, dev_hdl) \ - { \ - .max_leds = number, \ - .dev = dev_hdl, \ - } - -/** -* @brief Install a new ws2812 driver (based on RMT peripheral) -* -* @param config: LED strip configuration -* @return -* LED strip instance or NULL -*/ -led_strip_t *led_strip_new_rmt_ws2812(const led_strip_config_t *config); - -#ifdef __cplusplus -} -#endif diff --git a/tinyusb/hw/bsp/esp32s2/components/led_strip/src/led_strip_rmt_ws2812.c b/tinyusb/hw/bsp/esp32s2/components/led_strip/src/led_strip_rmt_ws2812.c deleted file mode 100755 index 025d3c59..00000000 --- a/tinyusb/hw/bsp/esp32s2/components/led_strip/src/led_strip_rmt_ws2812.c +++ /dev/null @@ -1,171 +0,0 @@ -// Copyright 2019 Espressif Systems (Shanghai) PTE LTD -// -// Licensed under the Apache License, Version 2.0 (the "License"); -// you may not use this file except in compliance with the License. -// You may obtain a copy of the License at -// -// http://www.apache.org/licenses/LICENSE-2.0 -// -// Unless required by applicable law or agreed to in writing, software -// distributed under the License is distributed on an "AS IS" BASIS, -// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -// See the License for the specific language governing permissions and -// limitations under the License. -#include <stdlib.h> -#include <string.h> -#include <sys/cdefs.h> -#include "esp_log.h" -#include "esp_attr.h" -#include "led_strip.h" -#include "driver/rmt.h" - -static const char *TAG = "ws2812"; -#define STRIP_CHECK(a, str, goto_tag, ret_value, ...) \ - do \ - { \ - if (!(a)) \ - { \ - ESP_LOGE(TAG, "%s(%d): " str, __FUNCTION__, __LINE__, ##__VA_ARGS__); \ - ret = ret_value; \ - goto goto_tag; \ - } \ - } while (0) - -#define WS2812_T0H_NS (350) -#define WS2812_T0L_NS (1000) -#define WS2812_T1H_NS (1000) -#define WS2812_T1L_NS (350) -#define WS2812_RESET_US (280) - -static uint32_t ws2812_t0h_ticks = 0; -static uint32_t ws2812_t1h_ticks = 0; -static uint32_t ws2812_t0l_ticks = 0; -static uint32_t ws2812_t1l_ticks = 0; - -typedef struct { - led_strip_t parent; - rmt_channel_t rmt_channel; - uint32_t strip_len; - uint8_t buffer[0]; -} ws2812_t; - -/** - * @brief Conver RGB data to RMT format. - * - * @note For WS2812, R,G,B each contains 256 different choices (i.e. uint8_t) - * - * @param[in] src: source data, to converted to RMT format - * @param[in] dest: place where to store the convert result - * @param[in] src_size: size of source data - * @param[in] wanted_num: number of RMT items that want to get - * @param[out] translated_size: number of source data that got converted - * @param[out] item_num: number of RMT items which are converted from source data - */ -static void IRAM_ATTR ws2812_rmt_adapter(const void *src, rmt_item32_t *dest, size_t src_size, - size_t wanted_num, size_t *translated_size, size_t *item_num) -{ - if (src == NULL || dest == NULL) { - *translated_size = 0; - *item_num = 0; - return; - } - const rmt_item32_t bit0 = {{{ ws2812_t0h_ticks, 1, ws2812_t0l_ticks, 0 }}}; //Logical 0 - const rmt_item32_t bit1 = {{{ ws2812_t1h_ticks, 1, ws2812_t1l_ticks, 0 }}}; //Logical 1 - size_t size = 0; - size_t num = 0; - uint8_t *psrc = (uint8_t *)src; - rmt_item32_t *pdest = dest; - while (size < src_size && num < wanted_num) { - for (int i = 0; i < 8; i++) { - // MSB first - if (*psrc & (1 << (7 - i))) { - pdest->val = bit1.val; - } else { - pdest->val = bit0.val; - } - num++; - pdest++; - } - size++; - psrc++; - } - *translated_size = size; - *item_num = num; -} - -static esp_err_t ws2812_set_pixel(led_strip_t *strip, uint32_t index, uint32_t red, uint32_t green, uint32_t blue) -{ - esp_err_t ret = ESP_OK; - ws2812_t *ws2812 = __containerof(strip, ws2812_t, parent); - STRIP_CHECK(index < ws2812->strip_len, "index out of the maximum number of leds", err, ESP_ERR_INVALID_ARG); - uint32_t start = index * 3; - // In thr order of GRB - ws2812->buffer[start + 0] = green & 0xFF; - ws2812->buffer[start + 1] = red & 0xFF; - ws2812->buffer[start + 2] = blue & 0xFF; - return ESP_OK; -err: - return ret; -} - -static esp_err_t ws2812_refresh(led_strip_t *strip, uint32_t timeout_ms) -{ - esp_err_t ret = ESP_OK; - ws2812_t *ws2812 = __containerof(strip, ws2812_t, parent); - STRIP_CHECK(rmt_write_sample(ws2812->rmt_channel, ws2812->buffer, ws2812->strip_len * 3, true) == ESP_OK, - "transmit RMT samples failed", err, ESP_FAIL); - return rmt_wait_tx_done(ws2812->rmt_channel, pdMS_TO_TICKS(timeout_ms)); -err: - return ret; -} - -static esp_err_t ws2812_clear(led_strip_t *strip, uint32_t timeout_ms) -{ - ws2812_t *ws2812 = __containerof(strip, ws2812_t, parent); - // Write zero to turn off all leds - memset(ws2812->buffer, 0, ws2812->strip_len * 3); - return ws2812_refresh(strip, timeout_ms); -} - -static esp_err_t ws2812_del(led_strip_t *strip) -{ - ws2812_t *ws2812 = __containerof(strip, ws2812_t, parent); - free(ws2812); - return ESP_OK; -} - -led_strip_t *led_strip_new_rmt_ws2812(const led_strip_config_t *config) -{ - led_strip_t *ret = NULL; - STRIP_CHECK(config, "configuration can't be null", err, NULL); - - // 24 bits per led - uint32_t ws2812_size = sizeof(ws2812_t) + config->max_leds * 3; - ws2812_t *ws2812 = calloc(1, ws2812_size); - STRIP_CHECK(ws2812, "request memory for ws2812 failed", err, NULL); - - uint32_t counter_clk_hz = 0; - STRIP_CHECK(rmt_get_counter_clock((rmt_channel_t)config->dev, &counter_clk_hz) == ESP_OK, - "get rmt counter clock failed", err, NULL); - // ns -> ticks - float ratio = (float)counter_clk_hz / 1e9; - ws2812_t0h_ticks = (uint32_t)(ratio * WS2812_T0H_NS); - ws2812_t0l_ticks = (uint32_t)(ratio * WS2812_T0L_NS); - ws2812_t1h_ticks = (uint32_t)(ratio * WS2812_T1H_NS); - ws2812_t1l_ticks = (uint32_t)(ratio * WS2812_T1L_NS); - - // set ws2812 to rmt adapter - rmt_translator_init((rmt_channel_t)config->dev, ws2812_rmt_adapter); - - ws2812->rmt_channel = (rmt_channel_t)config->dev; - ws2812->strip_len = config->max_leds; - - ws2812->parent.set_pixel = ws2812_set_pixel; - ws2812->parent.refresh = ws2812_refresh; - ws2812->parent.clear = ws2812_clear; - ws2812->parent.del = ws2812_del; - - return &ws2812->parent; -err: - return ret; -} diff --git a/tinyusb/hw/bsp/esp32s2/family.cmake b/tinyusb/hw/bsp/esp32s2/family.cmake deleted file mode 100755 index f3d41d04..00000000 --- a/tinyusb/hw/bsp/esp32s2/family.cmake +++ /dev/null @@ -1,7 +0,0 @@ -cmake_minimum_required(VERSION 3.5) - -# Add example src and bsp directories -set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s2/boards" "${TOP}/hw/bsp/esp32s2/components") -include($ENV{IDF_PATH}/tools/cmake/project.cmake) -set(SUPPORTED_TARGETS esp32s2) -set(FAMILY_MCUS ESP32S2) diff --git a/tinyusb/hw/bsp/esp32s2/family.mk b/tinyusb/hw/bsp/esp32s2/family.mk deleted file mode 100755 index fb9b2164..00000000 --- a/tinyusb/hw/bsp/esp32s2/family.mk +++ /dev/null @@ -1,26 +0,0 @@ -#DEPS_SUBMODULES += - -.PHONY: all clean flash bootloader-flash app-flash erase monitor dfu-flash dfu - -all: - idf.py -B$(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) $(CMAKE_DEFSYM) -DIDF_TARGET=esp32s2 build - -build: all - -clean: - idf.py -B$(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) $(CMAKE_DEFSYM) clean - -fullclean: - if test -f sdkconfig; then $(RM) -f sdkconfig ; fi - if test -d $(BUILD); then $(RM) -rf $(BUILD) ; fi - -flash bootloader-flash app-flash erase monitor dfu-flash dfu: - idf.py -B$(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) $(CMAKE_DEFSYM) $@ - -uf2: $(BUILD)/$(PROJECT).uf2 - -UF2_FAMILY_ID = 0xbfdd4eee -$(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).bin - @echo CREATE $@ - $(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID) -b 0x0 -c -o $@ $^ - diff --git a/tinyusb/hw/bsp/esp32s3/boards/CMakeLists.txt b/tinyusb/hw/bsp/esp32s3/boards/CMakeLists.txt deleted file mode 100755 index e1b921ae..00000000 --- a/tinyusb/hw/bsp/esp32s3/boards/CMakeLists.txt +++ /dev/null @@ -1,14 +0,0 @@ -idf_component_register(SRCS esp32s3.c - INCLUDE_DIRS "." "${BOARD}" - PRIV_REQUIRES "driver" - REQUIRES freertos src led_strip) - -# Apply board specific content -include("${BOARD}/board.cmake") - -idf_component_get_property( FREERTOS_ORIG_INCLUDE_PATH freertos ORIG_INCLUDE_PATH) -target_include_directories(${COMPONENT_TARGET} PUBLIC - "${FREERTOS_ORIG_INCLUDE_PATH}" - "${TOP}/hw" - "${TOP}/src" -) diff --git a/tinyusb/hw/bsp/esp32s3/boards/esp32s3.c b/tinyusb/hw/bsp/esp32s3/boards/esp32s3.c deleted file mode 100755 index 358c0c80..00000000 --- a/tinyusb/hw/bsp/esp32s3/boards/esp32s3.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../../board.h" -#include "board.h" - -#include "esp_rom_gpio.h" -#include "hal/gpio_ll.h" -#include "hal/usb_hal.h" -#include "soc/usb_periph.h" - -#include "driver/periph_ctrl.h" -#include "driver/rmt.h" - -#ifdef NEOPIXEL_PIN -#include "led_strip.h" -static led_strip_t *strip; -#endif - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ - -static void configure_pins(usb_hal_context_t *usb); - -// Initialize on-board peripherals : led, button, uart and USB -void board_init(void) -{ - -#ifdef NEOPIXEL_PIN - #ifdef NEOPIXEL_POWER_PIN - gpio_reset_pin(NEOPIXEL_POWER_PIN); - gpio_set_direction(NEOPIXEL_POWER_PIN, GPIO_MODE_OUTPUT); - gpio_set_level(NEOPIXEL_POWER_PIN, NEOPIXEL_POWER_STATE); - #endif - - // WS2812 Neopixel driver with RMT peripheral - rmt_config_t config = RMT_DEFAULT_CONFIG_TX(NEOPIXEL_PIN, RMT_CHANNEL_0); - config.clk_div = 2; // set counter clock to 40MHz - - rmt_config(&config); - rmt_driver_install(config.channel, 0, 0); - - led_strip_config_t strip_config = LED_STRIP_DEFAULT_CONFIG(1, (led_strip_dev_t) config.channel); - strip = led_strip_new_rmt_ws2812(&strip_config); - strip->clear(strip, 100); // off led -#endif - - // Button - gpio_pad_select_gpio(BUTTON_PIN); - gpio_set_direction(BUTTON_PIN, GPIO_MODE_INPUT); - gpio_set_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN_ONLY : GPIO_PULLUP_ONLY); - - // USB Controller Hal init - periph_module_reset(PERIPH_USB_MODULE); - periph_module_enable(PERIPH_USB_MODULE); - - usb_hal_context_t hal = { - .use_external_phy = false // use built-in PHY - }; - usb_hal_init(&hal); - configure_pins(&hal); -} - -static void configure_pins(usb_hal_context_t *usb) -{ - /* usb_periph_iopins currently configures USB_OTG as USB Device. - * Introduce additional parameters in usb_hal_context_t when adding support - * for USB Host. - */ - for (const usb_iopin_dsc_t *iopin = usb_periph_iopins; iopin->pin != -1; ++iopin) { - if ((usb->use_external_phy) || (iopin->ext_phy_only == 0)) { - esp_rom_gpio_pad_select_gpio(iopin->pin); - if (iopin->is_output) { - esp_rom_gpio_connect_out_signal(iopin->pin, iopin->func, false, false); - } else { - esp_rom_gpio_connect_in_signal(iopin->pin, iopin->func, false); - if ((iopin->pin != GPIO_FUNC_IN_LOW) && (iopin->pin != GPIO_FUNC_IN_HIGH)) { - gpio_ll_input_enable(&GPIO, iopin->pin); - } - } - esp_rom_gpio_pad_unhold(iopin->pin); - } - } - if (!usb->use_external_phy) { - gpio_set_drive_capability(USBPHY_DM_NUM, GPIO_DRIVE_CAP_3); - gpio_set_drive_capability(USBPHY_DP_NUM, GPIO_DRIVE_CAP_3); - } -} - -// Turn LED on or off -void board_led_write(bool state) -{ -#ifdef NEOPIXEL_PIN - strip->set_pixel(strip, 0, (state ? 0x88 : 0x00), 0x00, 0x00); - strip->refresh(strip, 100); -#endif -} - -// Get the current state of button -// a '1' means active (pressed), a '0' means inactive. -uint32_t board_button_read(void) -{ - return gpio_get_level(BUTTON_PIN) == BUTTON_STATE_ACTIVE; -} - -// Get characters from UART -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -// Send characters to UART -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - diff --git a/tinyusb/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake b/tinyusb/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake deleted file mode 100755 index 60f7d19c..00000000 --- a/tinyusb/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake +++ /dev/null @@ -1,17 +0,0 @@ -# Apply board specific content here -target_include_directories(${COMPONENT_LIB} PRIVATE .) - -idf_build_get_property(idf_target IDF_TARGET) - -message(STATUS "Apply ${BOARD}(${idf_target}) specific options for component: ${COMPONENT_TARGET}") - -if(NOT ${idf_target} STREQUAL "esp32s3") - message(FATAL_ERROR "Incorrect target for board ${BOARD}: (${idf_target}), try to clean the build first." ) -endif() - -set(IDF_TARGET "esp32s3" FORCE) - -target_compile_options(${COMPONENT_TARGET} PUBLIC - "-DCFG_TUSB_MCU=OPT_MCU_ESP32S3" - "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -)
\ No newline at end of file diff --git a/tinyusb/hw/bsp/esp32s3/boards/espressif_addax_1/board.h b/tinyusb/hw/bsp/esp32s3/boards/espressif_addax_1/board.h deleted file mode 100755 index fff24ba4..00000000 --- a/tinyusb/hw/bsp/esp32s3/boards/espressif_addax_1/board.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// Note: On the production version (v1.1) WS2812 is connected to GPIO 47 -#define NEOPIXEL_PIN 47 - -#define BUTTON_PIN 0 -#define BUTTON_STATE_ACTIVE 0 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/esp32s3/components/led_strip/CMakeLists.txt b/tinyusb/hw/bsp/esp32s3/components/led_strip/CMakeLists.txt deleted file mode 100755 index 6d0fcbc8..00000000 --- a/tinyusb/hw/bsp/esp32s3/components/led_strip/CMakeLists.txt +++ /dev/null @@ -1,8 +0,0 @@ -set(component_srcs "src/led_strip_rmt_ws2812.c") - -idf_component_register(SRCS "${component_srcs}" - INCLUDE_DIRS "include" - PRIV_INCLUDE_DIRS "" - PRIV_REQUIRES "driver" - REQUIRES "") - diff --git a/tinyusb/hw/bsp/esp32s3/components/led_strip/include/led_strip.h b/tinyusb/hw/bsp/esp32s3/components/led_strip/include/led_strip.h deleted file mode 100755 index a9dffc32..00000000 --- a/tinyusb/hw/bsp/esp32s3/components/led_strip/include/led_strip.h +++ /dev/null @@ -1,126 +0,0 @@ -// Copyright 2019 Espressif Systems (Shanghai) PTE LTD -// -// Licensed under the Apache License, Version 2.0 (the "License"); -// you may not use this file except in compliance with the License. -// You may obtain a copy of the License at -// -// http://www.apache.org/licenses/LICENSE-2.0 -// -// Unless required by applicable law or agreed to in writing, software -// distributed under the License is distributed on an "AS IS" BASIS, -// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -// See the License for the specific language governing permissions and -// limitations under the License. -#pragma once - -#ifdef __cplusplus -extern "C" { -#endif - -#include "esp_err.h" - -/** -* @brief LED Strip Type -* -*/ -typedef struct led_strip_s led_strip_t; - -/** -* @brief LED Strip Device Type -* -*/ -typedef void *led_strip_dev_t; - -/** -* @brief Declare of LED Strip Type -* -*/ -struct led_strip_s { - /** - * @brief Set RGB for a specific pixel - * - * @param strip: LED strip - * @param index: index of pixel to set - * @param red: red part of color - * @param green: green part of color - * @param blue: blue part of color - * - * @return - * - ESP_OK: Set RGB for a specific pixel successfully - * - ESP_ERR_INVALID_ARG: Set RGB for a specific pixel failed because of invalid parameters - * - ESP_FAIL: Set RGB for a specific pixel failed because other error occurred - */ - esp_err_t (*set_pixel)(led_strip_t *strip, uint32_t index, uint32_t red, uint32_t green, uint32_t blue); - - /** - * @brief Refresh memory colors to LEDs - * - * @param strip: LED strip - * @param timeout_ms: timeout value for refreshing task - * - * @return - * - ESP_OK: Refresh successfully - * - ESP_ERR_TIMEOUT: Refresh failed because of timeout - * - ESP_FAIL: Refresh failed because some other error occurred - * - * @note: - * After updating the LED colors in the memory, a following invocation of this API is needed to flush colors to strip. - */ - esp_err_t (*refresh)(led_strip_t *strip, uint32_t timeout_ms); - - /** - * @brief Clear LED strip (turn off all LEDs) - * - * @param strip: LED strip - * @param timeout_ms: timeout value for clearing task - * - * @return - * - ESP_OK: Clear LEDs successfully - * - ESP_ERR_TIMEOUT: Clear LEDs failed because of timeout - * - ESP_FAIL: Clear LEDs failed because some other error occurred - */ - esp_err_t (*clear)(led_strip_t *strip, uint32_t timeout_ms); - - /** - * @brief Free LED strip resources - * - * @param strip: LED strip - * - * @return - * - ESP_OK: Free resources successfully - * - ESP_FAIL: Free resources failed because error occurred - */ - esp_err_t (*del)(led_strip_t *strip); -}; - -/** -* @brief LED Strip Configuration Type -* -*/ -typedef struct { - uint32_t max_leds; /*!< Maximum LEDs in a single strip */ - led_strip_dev_t dev; /*!< LED strip device (e.g. RMT channel, PWM channel, etc) */ -} led_strip_config_t; - -/** - * @brief Default configuration for LED strip - * - */ -#define LED_STRIP_DEFAULT_CONFIG(number, dev_hdl) \ - { \ - .max_leds = number, \ - .dev = dev_hdl, \ - } - -/** -* @brief Install a new ws2812 driver (based on RMT peripheral) -* -* @param config: LED strip configuration -* @return -* LED strip instance or NULL -*/ -led_strip_t *led_strip_new_rmt_ws2812(const led_strip_config_t *config); - -#ifdef __cplusplus -} -#endif diff --git a/tinyusb/hw/bsp/esp32s3/components/led_strip/src/led_strip_rmt_ws2812.c b/tinyusb/hw/bsp/esp32s3/components/led_strip/src/led_strip_rmt_ws2812.c deleted file mode 100755 index 025d3c59..00000000 --- a/tinyusb/hw/bsp/esp32s3/components/led_strip/src/led_strip_rmt_ws2812.c +++ /dev/null @@ -1,171 +0,0 @@ -// Copyright 2019 Espressif Systems (Shanghai) PTE LTD -// -// Licensed under the Apache License, Version 2.0 (the "License"); -// you may not use this file except in compliance with the License. -// You may obtain a copy of the License at -// -// http://www.apache.org/licenses/LICENSE-2.0 -// -// Unless required by applicable law or agreed to in writing, software -// distributed under the License is distributed on an "AS IS" BASIS, -// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -// See the License for the specific language governing permissions and -// limitations under the License. -#include <stdlib.h> -#include <string.h> -#include <sys/cdefs.h> -#include "esp_log.h" -#include "esp_attr.h" -#include "led_strip.h" -#include "driver/rmt.h" - -static const char *TAG = "ws2812"; -#define STRIP_CHECK(a, str, goto_tag, ret_value, ...) \ - do \ - { \ - if (!(a)) \ - { \ - ESP_LOGE(TAG, "%s(%d): " str, __FUNCTION__, __LINE__, ##__VA_ARGS__); \ - ret = ret_value; \ - goto goto_tag; \ - } \ - } while (0) - -#define WS2812_T0H_NS (350) -#define WS2812_T0L_NS (1000) -#define WS2812_T1H_NS (1000) -#define WS2812_T1L_NS (350) -#define WS2812_RESET_US (280) - -static uint32_t ws2812_t0h_ticks = 0; -static uint32_t ws2812_t1h_ticks = 0; -static uint32_t ws2812_t0l_ticks = 0; -static uint32_t ws2812_t1l_ticks = 0; - -typedef struct { - led_strip_t parent; - rmt_channel_t rmt_channel; - uint32_t strip_len; - uint8_t buffer[0]; -} ws2812_t; - -/** - * @brief Conver RGB data to RMT format. - * - * @note For WS2812, R,G,B each contains 256 different choices (i.e. uint8_t) - * - * @param[in] src: source data, to converted to RMT format - * @param[in] dest: place where to store the convert result - * @param[in] src_size: size of source data - * @param[in] wanted_num: number of RMT items that want to get - * @param[out] translated_size: number of source data that got converted - * @param[out] item_num: number of RMT items which are converted from source data - */ -static void IRAM_ATTR ws2812_rmt_adapter(const void *src, rmt_item32_t *dest, size_t src_size, - size_t wanted_num, size_t *translated_size, size_t *item_num) -{ - if (src == NULL || dest == NULL) { - *translated_size = 0; - *item_num = 0; - return; - } - const rmt_item32_t bit0 = {{{ ws2812_t0h_ticks, 1, ws2812_t0l_ticks, 0 }}}; //Logical 0 - const rmt_item32_t bit1 = {{{ ws2812_t1h_ticks, 1, ws2812_t1l_ticks, 0 }}}; //Logical 1 - size_t size = 0; - size_t num = 0; - uint8_t *psrc = (uint8_t *)src; - rmt_item32_t *pdest = dest; - while (size < src_size && num < wanted_num) { - for (int i = 0; i < 8; i++) { - // MSB first - if (*psrc & (1 << (7 - i))) { - pdest->val = bit1.val; - } else { - pdest->val = bit0.val; - } - num++; - pdest++; - } - size++; - psrc++; - } - *translated_size = size; - *item_num = num; -} - -static esp_err_t ws2812_set_pixel(led_strip_t *strip, uint32_t index, uint32_t red, uint32_t green, uint32_t blue) -{ - esp_err_t ret = ESP_OK; - ws2812_t *ws2812 = __containerof(strip, ws2812_t, parent); - STRIP_CHECK(index < ws2812->strip_len, "index out of the maximum number of leds", err, ESP_ERR_INVALID_ARG); - uint32_t start = index * 3; - // In thr order of GRB - ws2812->buffer[start + 0] = green & 0xFF; - ws2812->buffer[start + 1] = red & 0xFF; - ws2812->buffer[start + 2] = blue & 0xFF; - return ESP_OK; -err: - return ret; -} - -static esp_err_t ws2812_refresh(led_strip_t *strip, uint32_t timeout_ms) -{ - esp_err_t ret = ESP_OK; - ws2812_t *ws2812 = __containerof(strip, ws2812_t, parent); - STRIP_CHECK(rmt_write_sample(ws2812->rmt_channel, ws2812->buffer, ws2812->strip_len * 3, true) == ESP_OK, - "transmit RMT samples failed", err, ESP_FAIL); - return rmt_wait_tx_done(ws2812->rmt_channel, pdMS_TO_TICKS(timeout_ms)); -err: - return ret; -} - -static esp_err_t ws2812_clear(led_strip_t *strip, uint32_t timeout_ms) -{ - ws2812_t *ws2812 = __containerof(strip, ws2812_t, parent); - // Write zero to turn off all leds - memset(ws2812->buffer, 0, ws2812->strip_len * 3); - return ws2812_refresh(strip, timeout_ms); -} - -static esp_err_t ws2812_del(led_strip_t *strip) -{ - ws2812_t *ws2812 = __containerof(strip, ws2812_t, parent); - free(ws2812); - return ESP_OK; -} - -led_strip_t *led_strip_new_rmt_ws2812(const led_strip_config_t *config) -{ - led_strip_t *ret = NULL; - STRIP_CHECK(config, "configuration can't be null", err, NULL); - - // 24 bits per led - uint32_t ws2812_size = sizeof(ws2812_t) + config->max_leds * 3; - ws2812_t *ws2812 = calloc(1, ws2812_size); - STRIP_CHECK(ws2812, "request memory for ws2812 failed", err, NULL); - - uint32_t counter_clk_hz = 0; - STRIP_CHECK(rmt_get_counter_clock((rmt_channel_t)config->dev, &counter_clk_hz) == ESP_OK, - "get rmt counter clock failed", err, NULL); - // ns -> ticks - float ratio = (float)counter_clk_hz / 1e9; - ws2812_t0h_ticks = (uint32_t)(ratio * WS2812_T0H_NS); - ws2812_t0l_ticks = (uint32_t)(ratio * WS2812_T0L_NS); - ws2812_t1h_ticks = (uint32_t)(ratio * WS2812_T1H_NS); - ws2812_t1l_ticks = (uint32_t)(ratio * WS2812_T1L_NS); - - // set ws2812 to rmt adapter - rmt_translator_init((rmt_channel_t)config->dev, ws2812_rmt_adapter); - - ws2812->rmt_channel = (rmt_channel_t)config->dev; - ws2812->strip_len = config->max_leds; - - ws2812->parent.set_pixel = ws2812_set_pixel; - ws2812->parent.refresh = ws2812_refresh; - ws2812->parent.clear = ws2812_clear; - ws2812->parent.del = ws2812_del; - - return &ws2812->parent; -err: - return ret; -} diff --git a/tinyusb/hw/bsp/esp32s3/family.cmake b/tinyusb/hw/bsp/esp32s3/family.cmake deleted file mode 100755 index 511dd58b..00000000 --- a/tinyusb/hw/bsp/esp32s3/family.cmake +++ /dev/null @@ -1,7 +0,0 @@ -cmake_minimum_required(VERSION 3.5) - -# Add example src and bsp directories -set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s3/boards" "${TOP}/hw/bsp/esp32s3/components") -include($ENV{IDF_PATH}/tools/cmake/project.cmake) -set(SUPPORTED_TARGETS esp32s3) -set(FAMILY_MCUS ESP32S3) diff --git a/tinyusb/hw/bsp/esp32s3/family.mk b/tinyusb/hw/bsp/esp32s3/family.mk deleted file mode 100755 index cf153ffc..00000000 --- a/tinyusb/hw/bsp/esp32s3/family.mk +++ /dev/null @@ -1,26 +0,0 @@ -#DEPS_SUBMODULES += - -.PHONY: all clean flash bootloader-flash app-flash erase monitor dfu-flash dfu - -all: - idf.py -B$(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) $(CMAKE_DEFSYM) -DIDF_TARGET=esp32s3 build - -build: all - -clean: - idf.py -B$(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) $(CMAKE_DEFSYM) clean - -fullclean: - if test -f sdkconfig; then $(RM) -f sdkconfig ; fi - if test -d $(BUILD); then $(RM) -rf $(BUILD) ; fi - -flash bootloader-flash app-flash erase monitor dfu-flash dfu: - idf.py -B$(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) $(CMAKE_DEFSYM) $@ - -uf2: $(BUILD)/$(PROJECT).uf2 - -UF2_FAMILY_ID = 0xc47e5767 -$(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).bin - @echo CREATE $@ - $(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID) -b 0x0 -c -o $@ $^ - diff --git a/tinyusb/hw/bsp/family_support.cmake b/tinyusb/hw/bsp/family_support.cmake deleted file mode 100755 index af0e00b2..00000000 --- a/tinyusb/hw/bsp/family_support.cmake +++ /dev/null @@ -1,71 +0,0 @@ -if (NOT TARGET _family_support_marker) - add_library(_family_support_marker INTERFACE) - - if (NOT FAMILY) - message(FATAL_ERROR "You must set a FAMILY variable for the build (e.g. rp2040, eps32s2, esp32s3). You can do this via -DFAMILY=xxx on the camke command line") - endif() - - if (NOT EXISTS ${CMAKE_CURRENT_LIST_DIR}/${FAMILY}/family.cmake) - message(FATAL_ERROR "Family '${FAMILY}' is not known/supported") - endif() - - function(family_filter RESULT DIR) - get_filename_component(DIR ${DIR} ABSOLUTE BASE_DIR ${CMAKE_CURRENT_SOURCE_DIR}) - file(GLOB ONLYS "${DIR}/.only.MCU_*") - if (ONLYS) - foreach(MCU IN LISTS FAMILY_MCUS) - if (EXISTS ${DIR}/.only.MCU_${MCU}) - set(${RESULT} 1 PARENT_SCOPE) - return() - endif() - endforeach() - else() - foreach(MCU IN LISTS FAMILY_MCUS) - if (EXISTS ${DIR}/.skip.MCU_${MCU}) - set(${RESULT} 0 PARENT_SCOPE) - return() - endif() - endforeach() - endif() - set(${RESULT} 1 PARENT_SCOPE) - endfunction() - - function(family_add_subdirectory DIR) - family_filter(SHOULD_ADD "${DIR}") - if (SHOULD_ADD) - add_subdirectory(${DIR}) - endif() - endfunction() - - function(family_get_project_name OUTPUT_NAME DIR) - get_filename_component(SHORT_NAME ${DIR} NAME) - set(${OUTPUT_NAME} ${TINYUSB_FAMILY_PROJECT_NAME_PREFIX}${SHORT_NAME} PARENT_SCOPE) - endfunction() - - function(family_initialize_project PROJECT DIR) - family_filter(ALLOWED "${DIR}") - if (NOT ALLOWED) - get_filename_component(SHORT_NAME ${DIR} NAME) - message(FATAL_ERROR "${SHORT_NAME} is not supported on FAMILY=${FAMILY}") - endif() - endfunction() - - # configure an executable target to link to tinyusb in device mode, and add the board implementation - function(family_configure_device_example TARGET) - # default implentation is empty, the function should be redefined in the FAMILY/family.cmake - endfunction() - - # configure an executable target to link to tinyusb in host mode, and add the board implementation - function(family_configure_host_example TARGET) - # default implentation is empty, the function should be redefined in the FAMILY/family.cmake - endfunction() - - include(${CMAKE_CURRENT_LIST_DIR}/${FAMILY}/family.cmake) - - if (NOT FAMILY_MCUS) - set(FAMILY_MCUS ${FAMILY}) - endif() - - # save it in case of re-inclusion - set(FAMILY_MCUS ${FAMILY_MCUS} CACHE INTERNAL "") -endif()
\ No newline at end of file diff --git a/tinyusb/hw/bsp/fomu/boards/fomu/board.h b/tinyusb/hw/bsp/fomu/boards/fomu/board.h deleted file mode 100755 index 666ba1d9..00000000 --- a/tinyusb/hw/bsp/fomu/boards/fomu/board.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// Place holder only - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/tinyusb/hw/bsp/fomu/boards/fomu/board.mk b/tinyusb/hw/bsp/fomu/boards/fomu/board.mk deleted file mode 100755 index 8ced1141..00000000 --- a/tinyusb/hw/bsp/fomu/boards/fomu/board.mk +++ /dev/null @@ -1 +0,0 @@ -# place holder
\ No newline at end of file diff --git a/tinyusb/hw/bsp/fomu/crt0-vexriscv.S b/tinyusb/hw/bsp/fomu/crt0-vexriscv.S deleted file mode 100755 index d80a29e0..00000000 --- a/tinyusb/hw/bsp/fomu/crt0-vexriscv.S +++ /dev/null @@ -1,83 +0,0 @@ -.global main -.global isr - -.section .text.start -.global _start - -_start: - j crt_init - -.section .text -.global trap_entry -trap_entry: - sw x1, - 1*4(sp) - sw x5, - 2*4(sp) - sw x6, - 3*4(sp) - sw x7, - 4*4(sp) - sw x10, - 5*4(sp) - sw x11, - 6*4(sp) - sw x12, - 7*4(sp) - sw x13, - 8*4(sp) - sw x14, - 9*4(sp) - sw x15, -10*4(sp) - sw x16, -11*4(sp) - sw x17, -12*4(sp) - sw x28, -13*4(sp) - sw x29, -14*4(sp) - sw x30, -15*4(sp) - sw x31, -16*4(sp) - addi sp,sp,-16*4 - call isr - lw x1 , 15*4(sp) - lw x5, 14*4(sp) - lw x6, 13*4(sp) - lw x7, 12*4(sp) - lw x10, 11*4(sp) - lw x11, 10*4(sp) - lw x12, 9*4(sp) - lw x13, 8*4(sp) - lw x14, 7*4(sp) - lw x15, 6*4(sp) - lw x16, 5*4(sp) - lw x17, 4*4(sp) - lw x28, 3*4(sp) - lw x29, 2*4(sp) - lw x30, 1*4(sp) - lw x31, 0*4(sp) - addi sp,sp,16*4 - mret - -.text -crt_init: - la sp, _estack - 4 - la a0, trap_entry - csrw mtvec, a0 - -bss_init: - la a0, _sbss - la a1, _ebss + 4 -bss_loop: - beq a0,a1,bss_done - sw zero,0(a0) - add a0,a0,4 - j bss_loop -bss_done: - - /* Load DATA */ - la t0, _etext - la t1, _srelocate - la t2, _erelocate + 4 -3: - lw t3, 0(t0) - sw t3, 0(t1) - /* _edata is aligned to 4 bytes. Use word-xfers. */ - addi t0, t0, 4 - addi t1, t1, 4 - bltu t1, t2, 3b - - li a0, 0x880 //880 enable timer + external interrupt sources (until mstatus.MIE is set, they will never trigger an interrupt) - csrw mie,a0 - - call main -infinite_loop: - j infinite_loop diff --git a/tinyusb/hw/bsp/fomu/dfu.py b/tinyusb/hw/bsp/fomu/dfu.py deleted file mode 100755 index 32479350..00000000 --- a/tinyusb/hw/bsp/fomu/dfu.py +++ /dev/null @@ -1,95 +0,0 @@ -#!/usr/bin/python - -# Written by Antonio Galea - 2010/11/18 -# Updated for DFU 1.1 by Sean Cross - 2020/03/31 -# Distributed under Gnu LGPL 3.0 -# see http://www.gnu.org/licenses/lgpl-3.0.txt - -import sys,struct,zlib,os -from optparse import OptionParser - -DEFAULT_DEVICE="0x1209:0x5bf0" - -def named(tuple,names): - return dict(zip(names.split(),tuple)) -def consume(fmt,data,names): - n = struct.calcsize(fmt) - return named(struct.unpack(fmt,data[:n]),names),data[n:] -def cstring(string): - return string.split('\0',1)[0] -def compute_crc(data): - return 0xFFFFFFFF & -zlib.crc32(data) -1 - -def parse(file,dump_images=False): - print ('File: "%s"' % file) - data = open(file,'rb').read() - crc = compute_crc(data[:-4]) - data = data[len(data)-16:] - suffix = named(struct.unpack('<4H3sBI',data[:16]),'device product vendor dfu ufd len crc') - print ('usb: %(vendor)04x:%(product)04x, device: 0x%(device)04x, dfu: 0x%(dfu)04x, %(ufd)s, %(len)d, 0x%(crc)08x' % suffix) - if crc != suffix['crc']: - print ("CRC ERROR: computed crc32 is 0x%08x" % crc) - data = data[16:] - if data: - print ("PARSE ERROR") - -def build(file,data,device=DEFAULT_DEVICE): - # Parse the VID and PID from the `device` argument - v,d=map(lambda x: int(x,0) & 0xFFFF, device.split(':',1)) - - # Generate the DFU suffix, consisting of these fields: - # Field name | Length | Description - # ================+=========+================================ - # bcdDevice | 2 | The release number of this firmware (0xffff - don't care) - # idProduct | 2 | PID of this device - # idVendor | 2 | VID of this device - # bcdDFU | 2 | Version of this DFU spec (0x01 0x00) - # ucDfuSignature | 3 | The characters 'DFU', printed in reverse order - # bLength | 1 | The length of this suffix (16 bytes) - # dwCRC | 4 | A CRC32 of the data, including this suffix - data += struct.pack('<4H3sB',0xffff,d,v,0x0100,b'UFD',16) - crc = compute_crc(data) - # Append the CRC32 of the entire block - data += struct.pack('<I',crc) - open(file,'wb').write(data) - -if __name__=="__main__": - usage = """ -%prog [-d|--dump] infile.dfu -%prog {-b|--build} file.bin [{-D|--device}=vendor:device] outfile.dfu""" - parser = OptionParser(usage=usage) - parser.add_option("-b", "--build", action="store", dest="binfile", - help="build a DFU file from given BINFILE", metavar="BINFILE") - parser.add_option("-D", "--device", action="store", dest="device", - help="build for DEVICE, defaults to %s" % DEFAULT_DEVICE, metavar="DEVICE") - parser.add_option("-d", "--dump", action="store_true", dest="dump_images", - default=False, help="dump contained images to current directory") - (options, args) = parser.parse_args() - - if options.binfile and len(args)==1: - binfile = options.binfile - if not os.path.isfile(binfile): - print ("Unreadable file '%s'." % binfile) - sys.exit(1) - target = open(binfile,'rb').read() - outfile = args[0] - device = DEFAULT_DEVICE - # If a device is specified, parse the pair into a VID:PID pair - # in order to validate them. - if options.device: - device=options.device - try: - v,d=map(lambda x: int(x,0) & 0xFFFF, device.split(':',1)) - except: - print ("Invalid device '%s'." % device) - sys.exit(1) - build(outfile,target,device) - elif len(args)==1: - infile = args[0] - if not os.path.isfile(infile): - print ("Unreadable file '%s'." % infile) - sys.exit(1) - parse(infile, dump_images=options.dump_images) - else: - parser.print_help() - sys.exit(1) diff --git a/tinyusb/hw/bsp/fomu/family.mk b/tinyusb/hw/bsp/fomu/family.mk deleted file mode 100755 index 165535c6..00000000 --- a/tinyusb/hw/bsp/fomu/family.mk +++ /dev/null @@ -1,30 +0,0 @@ -CFLAGS += \ - -flto \ - -march=rv32i \ - -mabi=ilp32 \ - -nostdlib \ - -DCFG_TUSB_MCU=OPT_MCU_VALENTYUSB_EPTRI - -# Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack -CROSS_COMPILE = riscv-none-embed- - -# All source paths should be relative to the top level. -LD_FILE = $(FAMILY_PATH)/fomu.ld - -SRC_C += src/portable/valentyusb/eptri/dcd_eptri.c - -SRC_S += $(FAMILY_PATH)/crt0-vexriscv.S - -INC += \ - $(TOP)/$(FAMILY_PATH)/include - -# For freeRTOS port source -FREERTOS_PORT = RISC-V - -# flash using dfu-util -$(BUILD)/$(PROJECT).dfu: $(BUILD)/$(PROJECT).bin - @echo "Create $@" - python $(TOP)/hw/bsp/$(BOARD)/dfu.py -b $^ -D 0x1209:0x5bf0 $@ - -flash: $(BUILD)/$(PROJECT).dfu - dfu-util -D $^ diff --git a/tinyusb/hw/bsp/fomu/fomu.c b/tinyusb/hw/bsp/fomu/fomu.c deleted file mode 100755 index 25e5e961..00000000 --- a/tinyusb/hw/bsp/fomu/fomu.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include <stdint.h> -#include <stdbool.h> -#include "../board.h" -#include "csr.h" -#include "irq.h" - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void fomu_error(uint32_t line) -{ - (void)line; - TU_BREAKPOINT(); -} - -volatile uint32_t system_ticks = 0; -static void timer_init(void) -{ - int t; - - timer0_en_write(0); - t = CONFIG_CLOCK_FREQUENCY / 1000; // 1000 kHz tick - timer0_reload_write(t); - timer0_load_write(t); - timer0_en_write(1); - timer0_ev_enable_write(1); - timer0_ev_pending_write(1); - irq_setmask(irq_getmask() | (1 << TIMER0_INTERRUPT)); -} - -void isr(void) -{ - unsigned int irqs; - - irqs = irq_pending() & irq_getmask(); - -#if CFG_TUSB_RHPORT0_MODE == OPT_MODE_DEVICE - if (irqs & (1 << USB_INTERRUPT)) { - tud_int_handler(0); - } -#endif - if (irqs & (1 << TIMER0_INTERRUPT)) { - system_ticks++; - timer0_ev_pending_write(1); - } -} - -void board_init(void) -{ - irq_setmask(0); - irq_setie(1); - timer_init(); - return; -} - -void board_led_write(bool state) -{ - rgb_ctrl_write(0xff); - rgb_raw_write(state); -} - -uint32_t board_button_read(void) -{ - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; - (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - int32_t offset = 0; - for (offset = 0; offset < len; offset++) - if (! (messible_status_read() & CSR_MESSIBLE_STATUS_FULL_OFFSET)) - messible_in_write(((uint8_t *)buf)[offset]); - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/tinyusb/hw/bsp/fomu/fomu.ld b/tinyusb/hw/bsp/fomu/fomu.ld deleted file mode 100755 index 13278d2a..00000000 --- a/tinyusb/hw/bsp/fomu/fomu.ld +++ /dev/null @@ -1,104 +0,0 @@ -OUTPUT_FORMAT("elf32-littleriscv") -ENTRY(_start) - -__DYNAMIC = 0; - -MEMORY { - csr : ORIGIN = 0x60000000, LENGTH = 0x01000000 - vexriscv_debug : ORIGIN = 0xf00f0000, LENGTH = 0x00000100 - ram : ORIGIN = 0x10000000, LENGTH = 0x00020000 - rom : ORIGIN = 0x20040000, LENGTH = 0x00200000 - 0x40000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _ftext = .; - *(.text.start) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - } > rom - - . = ALIGN(4); - _etext = .; /* End of text section */ - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(.sbss .sbss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/fomu/include/csr.h b/tinyusb/hw/bsp/fomu/include/csr.h deleted file mode 100755 index a2f60ecf..00000000 --- a/tinyusb/hw/bsp/fomu/include/csr.h +++ /dev/null @@ -1,750 +0,0 @@ -//-------------------------------------------------------------------------------- -// Auto-generated by Migen (f4fcd10) & LiteX (1425a68d) on 2019-11-12 19:41:49 -//-------------------------------------------------------------------------------- -#ifndef __GENERATED_CSR_H -#define __GENERATED_CSR_H -#include <stdint.h> -#ifdef CSR_ACCESSORS_DEFINED -extern void csr_writeb(uint8_t value, unsigned long addr); -extern uint8_t csr_readb(unsigned long addr); -extern void csr_writew(uint16_t value, unsigned long addr); -extern uint16_t csr_readw(unsigned long addr); -extern void csr_writel(uint32_t value, unsigned long addr); -extern uint32_t csr_readl(unsigned long addr); -#else /* ! CSR_ACCESSORS_DEFINED */ -#include <hw/common.h> -#endif /* ! CSR_ACCESSORS_DEFINED */ - -/* ctrl */ -#define CSR_CTRL_BASE 0xe0000000L -#define CSR_CTRL_RESET_ADDR 0xe0000000L -#define CSR_CTRL_RESET_SIZE 1 -static inline unsigned char ctrl_reset_read(void) { - unsigned char r = csr_readl(0xe0000000L); - return r; -} -static inline void ctrl_reset_write(unsigned char value) { - csr_writel(value, 0xe0000000L); -} -#define CSR_CTRL_SCRATCH_ADDR 0xe0000004L -#define CSR_CTRL_SCRATCH_SIZE 4 -static inline unsigned int ctrl_scratch_read(void) { - unsigned int r = csr_readl(0xe0000004L); - r <<= 8; - r |= csr_readl(0xe0000008L); - r <<= 8; - r |= csr_readl(0xe000000cL); - r <<= 8; - r |= csr_readl(0xe0000010L); - return r; -} -static inline void ctrl_scratch_write(unsigned int value) { - csr_writel(value >> 24, 0xe0000004L); - csr_writel(value >> 16, 0xe0000008L); - csr_writel(value >> 8, 0xe000000cL); - csr_writel(value, 0xe0000010L); -} -#define CSR_CTRL_BUS_ERRORS_ADDR 0xe0000014L -#define CSR_CTRL_BUS_ERRORS_SIZE 4 -static inline unsigned int ctrl_bus_errors_read(void) { - unsigned int r = csr_readl(0xe0000014L); - r <<= 8; - r |= csr_readl(0xe0000018L); - r <<= 8; - r |= csr_readl(0xe000001cL); - r <<= 8; - r |= csr_readl(0xe0000020L); - return r; -} - -/* messible */ -#define CSR_MESSIBLE_BASE 0xe0008000L -#define CSR_MESSIBLE_IN_ADDR 0xe0008000L -#define CSR_MESSIBLE_IN_SIZE 1 -static inline unsigned char messible_in_read(void) { - unsigned char r = csr_readl(0xe0008000L); - return r; -} -static inline void messible_in_write(unsigned char value) { - csr_writel(value, 0xe0008000L); -} -#define CSR_MESSIBLE_OUT_ADDR 0xe0008004L -#define CSR_MESSIBLE_OUT_SIZE 1 -static inline unsigned char messible_out_read(void) { - unsigned char r = csr_readl(0xe0008004L); - return r; -} -#define CSR_MESSIBLE_STATUS_ADDR 0xe0008008L -#define CSR_MESSIBLE_STATUS_SIZE 1 -static inline unsigned char messible_status_read(void) { - unsigned char r = csr_readl(0xe0008008L); - return r; -} -#define CSR_MESSIBLE_STATUS_FULL_OFFSET 0 -#define CSR_MESSIBLE_STATUS_FULL_SIZE 1 -#define CSR_MESSIBLE_STATUS_HAVE_OFFSET 1 -#define CSR_MESSIBLE_STATUS_HAVE_SIZE 1 - -/* picorvspi */ -#define CSR_PICORVSPI_BASE 0xe0005000L -#define CSR_PICORVSPI_CFG1_ADDR 0xe0005000L -#define CSR_PICORVSPI_CFG1_SIZE 1 -static inline unsigned char picorvspi_cfg1_read(void) { - unsigned char r = csr_readl(0xe0005000L); - return r; -} -static inline void picorvspi_cfg1_write(unsigned char value) { - csr_writel(value, 0xe0005000L); -} -#define CSR_PICORVSPI_CFG1_BB_OUT_OFFSET 0 -#define CSR_PICORVSPI_CFG1_BB_OUT_SIZE 4 -#define CSR_PICORVSPI_CFG1_BB_CLK_OFFSET 4 -#define CSR_PICORVSPI_CFG1_BB_CLK_SIZE 1 -#define CSR_PICORVSPI_CFG1_BB_CS_OFFSET 5 -#define CSR_PICORVSPI_CFG1_BB_CS_SIZE 1 -#define CSR_PICORVSPI_CFG2_ADDR 0xe0005004L -#define CSR_PICORVSPI_CFG2_SIZE 1 -static inline unsigned char picorvspi_cfg2_read(void) { - unsigned char r = csr_readl(0xe0005004L); - return r; -} -static inline void picorvspi_cfg2_write(unsigned char value) { - csr_writel(value, 0xe0005004L); -} -#define CSR_PICORVSPI_CFG2_BB_OE_OFFSET 0 -#define CSR_PICORVSPI_CFG2_BB_OE_SIZE 4 -#define CSR_PICORVSPI_CFG3_ADDR 0xe0005008L -#define CSR_PICORVSPI_CFG3_SIZE 1 -static inline unsigned char picorvspi_cfg3_read(void) { - unsigned char r = csr_readl(0xe0005008L); - return r; -} -static inline void picorvspi_cfg3_write(unsigned char value) { - csr_writel(value, 0xe0005008L); -} -#define CSR_PICORVSPI_CFG3_RLAT_OFFSET 0 -#define CSR_PICORVSPI_CFG3_RLAT_SIZE 4 -#define CSR_PICORVSPI_CFG3_CRM_OFFSET 4 -#define CSR_PICORVSPI_CFG3_CRM_SIZE 1 -#define CSR_PICORVSPI_CFG3_QSPI_OFFSET 5 -#define CSR_PICORVSPI_CFG3_QSPI_SIZE 1 -#define CSR_PICORVSPI_CFG3_DDR_OFFSET 6 -#define CSR_PICORVSPI_CFG3_DDR_SIZE 1 -#define CSR_PICORVSPI_CFG4_ADDR 0xe000500cL -#define CSR_PICORVSPI_CFG4_SIZE 1 -static inline unsigned char picorvspi_cfg4_read(void) { - unsigned char r = csr_readl(0xe000500cL); - return r; -} -static inline void picorvspi_cfg4_write(unsigned char value) { - csr_writel(value, 0xe000500cL); -} -#define CSR_PICORVSPI_CFG4_MEMIO_OFFSET 7 -#define CSR_PICORVSPI_CFG4_MEMIO_SIZE 1 -#define CSR_PICORVSPI_STAT1_ADDR 0xe0005010L -#define CSR_PICORVSPI_STAT1_SIZE 1 -static inline unsigned char picorvspi_stat1_read(void) { - unsigned char r = csr_readl(0xe0005010L); - return r; -} -#define CSR_PICORVSPI_STAT1_BB_IN_OFFSET 0 -#define CSR_PICORVSPI_STAT1_BB_IN_SIZE 4 -#define CSR_PICORVSPI_STAT2_ADDR 0xe0005014L -#define CSR_PICORVSPI_STAT2_SIZE 1 -static inline unsigned char picorvspi_stat2_read(void) { - unsigned char r = csr_readl(0xe0005014L); - return r; -} -#define CSR_PICORVSPI_STAT3_ADDR 0xe0005018L -#define CSR_PICORVSPI_STAT3_SIZE 1 -static inline unsigned char picorvspi_stat3_read(void) { - unsigned char r = csr_readl(0xe0005018L); - return r; -} -#define CSR_PICORVSPI_STAT4_ADDR 0xe000501cL -#define CSR_PICORVSPI_STAT4_SIZE 1 -static inline unsigned char picorvspi_stat4_read(void) { - unsigned char r = csr_readl(0xe000501cL); - return r; -} - -/* reboot */ -#define CSR_REBOOT_BASE 0xe0006000L -#define CSR_REBOOT_CTRL_ADDR 0xe0006000L -#define CSR_REBOOT_CTRL_SIZE 1 -static inline unsigned char reboot_ctrl_read(void) { - unsigned char r = csr_readl(0xe0006000L); - return r; -} -static inline void reboot_ctrl_write(unsigned char value) { - csr_writel(value, 0xe0006000L); -} -#define CSR_REBOOT_CTRL_IMAGE_OFFSET 0 -#define CSR_REBOOT_CTRL_IMAGE_SIZE 2 -#define CSR_REBOOT_CTRL_KEY_OFFSET 2 -#define CSR_REBOOT_CTRL_KEY_SIZE 6 -#define CSR_REBOOT_ADDR_ADDR 0xe0006004L -#define CSR_REBOOT_ADDR_SIZE 4 -static inline unsigned int reboot_addr_read(void) { - unsigned int r = csr_readl(0xe0006004L); - r <<= 8; - r |= csr_readl(0xe0006008L); - r <<= 8; - r |= csr_readl(0xe000600cL); - r <<= 8; - r |= csr_readl(0xe0006010L); - return r; -} -static inline void reboot_addr_write(unsigned int value) { - csr_writel(value >> 24, 0xe0006004L); - csr_writel(value >> 16, 0xe0006008L); - csr_writel(value >> 8, 0xe000600cL); - csr_writel(value, 0xe0006010L); -} - -/* rgb */ -#define CSR_RGB_BASE 0xe0006800L -#define CSR_RGB_DAT_ADDR 0xe0006800L -#define CSR_RGB_DAT_SIZE 1 -static inline unsigned char rgb_dat_read(void) { - unsigned char r = csr_readl(0xe0006800L); - return r; -} -static inline void rgb_dat_write(unsigned char value) { - csr_writel(value, 0xe0006800L); -} -#define CSR_RGB_ADDR_ADDR 0xe0006804L -#define CSR_RGB_ADDR_SIZE 1 -static inline unsigned char rgb_addr_read(void) { - unsigned char r = csr_readl(0xe0006804L); - return r; -} -static inline void rgb_addr_write(unsigned char value) { - csr_writel(value, 0xe0006804L); -} -#define CSR_RGB_CTRL_ADDR 0xe0006808L -#define CSR_RGB_CTRL_SIZE 1 -static inline unsigned char rgb_ctrl_read(void) { - unsigned char r = csr_readl(0xe0006808L); - return r; -} -static inline void rgb_ctrl_write(unsigned char value) { - csr_writel(value, 0xe0006808L); -} -#define CSR_RGB_CTRL_EXE_OFFSET 0 -#define CSR_RGB_CTRL_EXE_SIZE 1 -#define CSR_RGB_CTRL_CURREN_OFFSET 1 -#define CSR_RGB_CTRL_CURREN_SIZE 1 -#define CSR_RGB_CTRL_RGBLEDEN_OFFSET 2 -#define CSR_RGB_CTRL_RGBLEDEN_SIZE 1 -#define CSR_RGB_CTRL_RRAW_OFFSET 3 -#define CSR_RGB_CTRL_RRAW_SIZE 1 -#define CSR_RGB_CTRL_GRAW_OFFSET 4 -#define CSR_RGB_CTRL_GRAW_SIZE 1 -#define CSR_RGB_CTRL_BRAW_OFFSET 5 -#define CSR_RGB_CTRL_BRAW_SIZE 1 -#define CSR_RGB_RAW_ADDR 0xe000680cL -#define CSR_RGB_RAW_SIZE 1 -static inline unsigned char rgb_raw_read(void) { - unsigned char r = csr_readl(0xe000680cL); - return r; -} -static inline void rgb_raw_write(unsigned char value) { - csr_writel(value, 0xe000680cL); -} -#define CSR_RGB_RAW_R_OFFSET 0 -#define CSR_RGB_RAW_R_SIZE 1 -#define CSR_RGB_RAW_G_OFFSET 1 -#define CSR_RGB_RAW_G_SIZE 1 -#define CSR_RGB_RAW_B_OFFSET 2 -#define CSR_RGB_RAW_B_SIZE 1 - -/* timer0 */ -#define CSR_TIMER0_BASE 0xe0002800L -#define CSR_TIMER0_LOAD_ADDR 0xe0002800L -#define CSR_TIMER0_LOAD_SIZE 4 -static inline unsigned int timer0_load_read(void) { - unsigned int r = csr_readl(0xe0002800L); - r <<= 8; - r |= csr_readl(0xe0002804L); - r <<= 8; - r |= csr_readl(0xe0002808L); - r <<= 8; - r |= csr_readl(0xe000280cL); - return r; -} -static inline void timer0_load_write(unsigned int value) { - csr_writel(value >> 24, 0xe0002800L); - csr_writel(value >> 16, 0xe0002804L); - csr_writel(value >> 8, 0xe0002808L); - csr_writel(value, 0xe000280cL); -} -#define CSR_TIMER0_RELOAD_ADDR 0xe0002810L -#define CSR_TIMER0_RELOAD_SIZE 4 -static inline unsigned int timer0_reload_read(void) { - unsigned int r = csr_readl(0xe0002810L); - r <<= 8; - r |= csr_readl(0xe0002814L); - r <<= 8; - r |= csr_readl(0xe0002818L); - r <<= 8; - r |= csr_readl(0xe000281cL); - return r; -} -static inline void timer0_reload_write(unsigned int value) { - csr_writel(value >> 24, 0xe0002810L); - csr_writel(value >> 16, 0xe0002814L); - csr_writel(value >> 8, 0xe0002818L); - csr_writel(value, 0xe000281cL); -} -#define CSR_TIMER0_EN_ADDR 0xe0002820L -#define CSR_TIMER0_EN_SIZE 1 -static inline unsigned char timer0_en_read(void) { - unsigned char r = csr_readl(0xe0002820L); - return r; -} -static inline void timer0_en_write(unsigned char value) { - csr_writel(value, 0xe0002820L); -} -#define CSR_TIMER0_UPDATE_VALUE_ADDR 0xe0002824L -#define CSR_TIMER0_UPDATE_VALUE_SIZE 1 -static inline unsigned char timer0_update_value_read(void) { - unsigned char r = csr_readl(0xe0002824L); - return r; -} -static inline void timer0_update_value_write(unsigned char value) { - csr_writel(value, 0xe0002824L); -} -#define CSR_TIMER0_VALUE_ADDR 0xe0002828L -#define CSR_TIMER0_VALUE_SIZE 4 -static inline unsigned int timer0_value_read(void) { - unsigned int r = csr_readl(0xe0002828L); - r <<= 8; - r |= csr_readl(0xe000282cL); - r <<= 8; - r |= csr_readl(0xe0002830L); - r <<= 8; - r |= csr_readl(0xe0002834L); - return r; -} -#define CSR_TIMER0_EV_STATUS_ADDR 0xe0002838L -#define CSR_TIMER0_EV_STATUS_SIZE 1 -static inline unsigned char timer0_ev_status_read(void) { - unsigned char r = csr_readl(0xe0002838L); - return r; -} -static inline void timer0_ev_status_write(unsigned char value) { - csr_writel(value, 0xe0002838L); -} -#define CSR_TIMER0_EV_PENDING_ADDR 0xe000283cL -#define CSR_TIMER0_EV_PENDING_SIZE 1 -static inline unsigned char timer0_ev_pending_read(void) { - unsigned char r = csr_readl(0xe000283cL); - return r; -} -static inline void timer0_ev_pending_write(unsigned char value) { - csr_writel(value, 0xe000283cL); -} -#define CSR_TIMER0_EV_ENABLE_ADDR 0xe0002840L -#define CSR_TIMER0_EV_ENABLE_SIZE 1 -static inline unsigned char timer0_ev_enable_read(void) { - unsigned char r = csr_readl(0xe0002840L); - return r; -} -static inline void timer0_ev_enable_write(unsigned char value) { - csr_writel(value, 0xe0002840L); -} - -/* touch */ -#define CSR_TOUCH_BASE 0xe0005800L -#define CSR_TOUCH_O_ADDR 0xe0005800L -#define CSR_TOUCH_O_SIZE 1 -static inline unsigned char touch_o_read(void) { - unsigned char r = csr_readl(0xe0005800L); - return r; -} -static inline void touch_o_write(unsigned char value) { - csr_writel(value, 0xe0005800L); -} -#define CSR_TOUCH_O_O_OFFSET 0 -#define CSR_TOUCH_O_O_SIZE 4 -#define CSR_TOUCH_OE_ADDR 0xe0005804L -#define CSR_TOUCH_OE_SIZE 1 -static inline unsigned char touch_oe_read(void) { - unsigned char r = csr_readl(0xe0005804L); - return r; -} -static inline void touch_oe_write(unsigned char value) { - csr_writel(value, 0xe0005804L); -} -#define CSR_TOUCH_OE_OE_OFFSET 0 -#define CSR_TOUCH_OE_OE_SIZE 4 -#define CSR_TOUCH_I_ADDR 0xe0005808L -#define CSR_TOUCH_I_SIZE 1 -static inline unsigned char touch_i_read(void) { - unsigned char r = csr_readl(0xe0005808L); - return r; -} -#define CSR_TOUCH_I_I_OFFSET 0 -#define CSR_TOUCH_I_I_SIZE 4 - -/* usb */ -#define CSR_USB_BASE 0xe0004800L -#define CSR_USB_PULLUP_OUT_ADDR 0xe0004800L -#define CSR_USB_PULLUP_OUT_SIZE 1 -static inline unsigned char usb_pullup_out_read(void) { - unsigned char r = csr_readl(0xe0004800L); - return r; -} -static inline void usb_pullup_out_write(unsigned char value) { - csr_writel(value, 0xe0004800L); -} -#define CSR_USB_ADDRESS_ADDR 0xe0004804L -#define CSR_USB_ADDRESS_SIZE 1 -static inline unsigned char usb_address_read(void) { - unsigned char r = csr_readl(0xe0004804L); - return r; -} -static inline void usb_address_write(unsigned char value) { - csr_writel(value, 0xe0004804L); -} -#define CSR_USB_ADDRESS_ADDR_OFFSET 0 -#define CSR_USB_ADDRESS_ADDR_SIZE 7 -#define CSR_USB_NEXT_EV_ADDR 0xe0004808L -#define CSR_USB_NEXT_EV_SIZE 1 -static inline unsigned char usb_next_ev_read(void) { - unsigned char r = csr_readl(0xe0004808L); - return r; -} -#define CSR_USB_NEXT_EV_IN_OFFSET 0 -#define CSR_USB_NEXT_EV_IN_SIZE 1 -#define CSR_USB_NEXT_EV_OUT_OFFSET 1 -#define CSR_USB_NEXT_EV_OUT_SIZE 1 -#define CSR_USB_NEXT_EV_SETUP_OFFSET 2 -#define CSR_USB_NEXT_EV_SETUP_SIZE 1 -#define CSR_USB_NEXT_EV_RESET_OFFSET 3 -#define CSR_USB_NEXT_EV_RESET_SIZE 1 -#define CSR_USB_SETUP_DATA_ADDR 0xe000480cL -#define CSR_USB_SETUP_DATA_SIZE 1 -static inline unsigned char usb_setup_data_read(void) { - unsigned char r = csr_readl(0xe000480cL); - return r; -} -#define CSR_USB_SETUP_DATA_DATA_OFFSET 0 -#define CSR_USB_SETUP_DATA_DATA_SIZE 8 -#define CSR_USB_SETUP_CTRL_ADDR 0xe0004810L -#define CSR_USB_SETUP_CTRL_SIZE 1 -static inline unsigned char usb_setup_ctrl_read(void) { - unsigned char r = csr_readl(0xe0004810L); - return r; -} -static inline void usb_setup_ctrl_write(unsigned char value) { - csr_writel(value, 0xe0004810L); -} -#define CSR_USB_SETUP_CTRL_RESET_OFFSET 5 -#define CSR_USB_SETUP_CTRL_RESET_SIZE 1 -#define CSR_USB_SETUP_STATUS_ADDR 0xe0004814L -#define CSR_USB_SETUP_STATUS_SIZE 1 -static inline unsigned char usb_setup_status_read(void) { - unsigned char r = csr_readl(0xe0004814L); - return r; -} -#define CSR_USB_SETUP_STATUS_EPNO_OFFSET 0 -#define CSR_USB_SETUP_STATUS_EPNO_SIZE 4 -#define CSR_USB_SETUP_STATUS_HAVE_OFFSET 4 -#define CSR_USB_SETUP_STATUS_HAVE_SIZE 1 -#define CSR_USB_SETUP_STATUS_PEND_OFFSET 5 -#define CSR_USB_SETUP_STATUS_PEND_SIZE 1 -#define CSR_USB_SETUP_STATUS_IS_IN_OFFSET 6 -#define CSR_USB_SETUP_STATUS_IS_IN_SIZE 1 -#define CSR_USB_SETUP_STATUS_DATA_OFFSET 7 -#define CSR_USB_SETUP_STATUS_DATA_SIZE 1 -#define CSR_USB_SETUP_EV_STATUS_ADDR 0xe0004818L -#define CSR_USB_SETUP_EV_STATUS_SIZE 1 -static inline unsigned char usb_setup_ev_status_read(void) { - unsigned char r = csr_readl(0xe0004818L); - return r; -} -static inline void usb_setup_ev_status_write(unsigned char value) { - csr_writel(value, 0xe0004818L); -} -#define CSR_USB_SETUP_EV_PENDING_ADDR 0xe000481cL -#define CSR_USB_SETUP_EV_PENDING_SIZE 1 -static inline unsigned char usb_setup_ev_pending_read(void) { - unsigned char r = csr_readl(0xe000481cL); - return r; -} -static inline void usb_setup_ev_pending_write(unsigned char value) { - csr_writel(value, 0xe000481cL); -} -#define CSR_USB_SETUP_EV_ENABLE_ADDR 0xe0004820L -#define CSR_USB_SETUP_EV_ENABLE_SIZE 1 -static inline unsigned char usb_setup_ev_enable_read(void) { - unsigned char r = csr_readl(0xe0004820L); - return r; -} -static inline void usb_setup_ev_enable_write(unsigned char value) { - csr_writel(value, 0xe0004820L); -} -#define CSR_USB_IN_DATA_ADDR 0xe0004824L -#define CSR_USB_IN_DATA_SIZE 1 -static inline unsigned char usb_in_data_read(void) { - unsigned char r = csr_readl(0xe0004824L); - return r; -} -static inline void usb_in_data_write(unsigned char value) { - csr_writel(value, 0xe0004824L); -} -#define CSR_USB_IN_DATA_DATA_OFFSET 0 -#define CSR_USB_IN_DATA_DATA_SIZE 8 -#define CSR_USB_IN_CTRL_ADDR 0xe0004828L -#define CSR_USB_IN_CTRL_SIZE 1 -static inline unsigned char usb_in_ctrl_read(void) { - unsigned char r = csr_readl(0xe0004828L); - return r; -} -static inline void usb_in_ctrl_write(unsigned char value) { - csr_writel(value, 0xe0004828L); -} -#define CSR_USB_IN_CTRL_EPNO_OFFSET 0 -#define CSR_USB_IN_CTRL_EPNO_SIZE 4 -#define CSR_USB_IN_CTRL_RESET_OFFSET 5 -#define CSR_USB_IN_CTRL_RESET_SIZE 1 -#define CSR_USB_IN_CTRL_STALL_OFFSET 6 -#define CSR_USB_IN_CTRL_STALL_SIZE 1 -#define CSR_USB_IN_STATUS_ADDR 0xe000482cL -#define CSR_USB_IN_STATUS_SIZE 1 -static inline unsigned char usb_in_status_read(void) { - unsigned char r = csr_readl(0xe000482cL); - return r; -} -#define CSR_USB_IN_STATUS_IDLE_OFFSET 0 -#define CSR_USB_IN_STATUS_IDLE_SIZE 1 -#define CSR_USB_IN_STATUS_HAVE_OFFSET 4 -#define CSR_USB_IN_STATUS_HAVE_SIZE 1 -#define CSR_USB_IN_STATUS_PEND_OFFSET 5 -#define CSR_USB_IN_STATUS_PEND_SIZE 1 -#define CSR_USB_IN_EV_STATUS_ADDR 0xe0004830L -#define CSR_USB_IN_EV_STATUS_SIZE 1 -static inline unsigned char usb_in_ev_status_read(void) { - unsigned char r = csr_readl(0xe0004830L); - return r; -} -static inline void usb_in_ev_status_write(unsigned char value) { - csr_writel(value, 0xe0004830L); -} -#define CSR_USB_IN_EV_PENDING_ADDR 0xe0004834L -#define CSR_USB_IN_EV_PENDING_SIZE 1 -static inline unsigned char usb_in_ev_pending_read(void) { - unsigned char r = csr_readl(0xe0004834L); - return r; -} -static inline void usb_in_ev_pending_write(unsigned char value) { - csr_writel(value, 0xe0004834L); -} -#define CSR_USB_IN_EV_ENABLE_ADDR 0xe0004838L -#define CSR_USB_IN_EV_ENABLE_SIZE 1 -static inline unsigned char usb_in_ev_enable_read(void) { - unsigned char r = csr_readl(0xe0004838L); - return r; -} -static inline void usb_in_ev_enable_write(unsigned char value) { - csr_writel(value, 0xe0004838L); -} -#define CSR_USB_OUT_DATA_ADDR 0xe000483cL -#define CSR_USB_OUT_DATA_SIZE 1 -static inline unsigned char usb_out_data_read(void) { - unsigned char r = csr_readl(0xe000483cL); - return r; -} -#define CSR_USB_OUT_DATA_DATA_OFFSET 0 -#define CSR_USB_OUT_DATA_DATA_SIZE 8 -#define CSR_USB_OUT_CTRL_ADDR 0xe0004840L -#define CSR_USB_OUT_CTRL_SIZE 1 -static inline unsigned char usb_out_ctrl_read(void) { - unsigned char r = csr_readl(0xe0004840L); - return r; -} -static inline void usb_out_ctrl_write(unsigned char value) { - csr_writel(value, 0xe0004840L); -} -#define CSR_USB_OUT_CTRL_EPNO_OFFSET 0 -#define CSR_USB_OUT_CTRL_EPNO_SIZE 4 -#define CSR_USB_OUT_CTRL_ENABLE_OFFSET 4 -#define CSR_USB_OUT_CTRL_ENABLE_SIZE 1 -#define CSR_USB_OUT_CTRL_RESET_OFFSET 5 -#define CSR_USB_OUT_CTRL_RESET_SIZE 1 -#define CSR_USB_OUT_CTRL_STALL_OFFSET 6 -#define CSR_USB_OUT_CTRL_STALL_SIZE 1 -#define CSR_USB_OUT_STATUS_ADDR 0xe0004844L -#define CSR_USB_OUT_STATUS_SIZE 1 -static inline unsigned char usb_out_status_read(void) { - unsigned char r = csr_readl(0xe0004844L); - return r; -} -#define CSR_USB_OUT_STATUS_EPNO_OFFSET 0 -#define CSR_USB_OUT_STATUS_EPNO_SIZE 4 -#define CSR_USB_OUT_STATUS_HAVE_OFFSET 4 -#define CSR_USB_OUT_STATUS_HAVE_SIZE 1 -#define CSR_USB_OUT_STATUS_PEND_OFFSET 5 -#define CSR_USB_OUT_STATUS_PEND_SIZE 1 -#define CSR_USB_OUT_EV_STATUS_ADDR 0xe0004848L -#define CSR_USB_OUT_EV_STATUS_SIZE 1 -static inline unsigned char usb_out_ev_status_read(void) { - unsigned char r = csr_readl(0xe0004848L); - return r; -} -static inline void usb_out_ev_status_write(unsigned char value) { - csr_writel(value, 0xe0004848L); -} -#define CSR_USB_OUT_EV_PENDING_ADDR 0xe000484cL -#define CSR_USB_OUT_EV_PENDING_SIZE 1 -static inline unsigned char usb_out_ev_pending_read(void) { - unsigned char r = csr_readl(0xe000484cL); - return r; -} -static inline void usb_out_ev_pending_write(unsigned char value) { - csr_writel(value, 0xe000484cL); -} -#define CSR_USB_OUT_EV_ENABLE_ADDR 0xe0004850L -#define CSR_USB_OUT_EV_ENABLE_SIZE 1 -static inline unsigned char usb_out_ev_enable_read(void) { - unsigned char r = csr_readl(0xe0004850L); - return r; -} -static inline void usb_out_ev_enable_write(unsigned char value) { - csr_writel(value, 0xe0004850L); -} -#define CSR_USB_OUT_ENABLE_STATUS_ADDR 0xe0004854L -#define CSR_USB_OUT_ENABLE_STATUS_SIZE 1 -static inline unsigned char usb_out_enable_status_read(void) { - unsigned char r = csr_readl(0xe0004854L); - return r; -} -#define CSR_USB_OUT_STALL_STATUS_ADDR 0xe0004858L -#define CSR_USB_OUT_STALL_STATUS_SIZE 1 -static inline unsigned char usb_out_stall_status_read(void) { - unsigned char r = csr_readl(0xe0004858L); - return r; -} - -/* version */ -#define CSR_VERSION_BASE 0xe0007000L -#define CSR_VERSION_MAJOR_ADDR 0xe0007000L -#define CSR_VERSION_MAJOR_SIZE 1 -static inline unsigned char version_major_read(void) { - unsigned char r = csr_readl(0xe0007000L); - return r; -} -#define CSR_VERSION_MINOR_ADDR 0xe0007004L -#define CSR_VERSION_MINOR_SIZE 1 -static inline unsigned char version_minor_read(void) { - unsigned char r = csr_readl(0xe0007004L); - return r; -} -#define CSR_VERSION_REVISION_ADDR 0xe0007008L -#define CSR_VERSION_REVISION_SIZE 1 -static inline unsigned char version_revision_read(void) { - unsigned char r = csr_readl(0xe0007008L); - return r; -} -#define CSR_VERSION_GITREV_ADDR 0xe000700cL -#define CSR_VERSION_GITREV_SIZE 4 -static inline unsigned int version_gitrev_read(void) { - unsigned int r = csr_readl(0xe000700cL); - r <<= 8; - r |= csr_readl(0xe0007010L); - r <<= 8; - r |= csr_readl(0xe0007014L); - r <<= 8; - r |= csr_readl(0xe0007018L); - return r; -} -#define CSR_VERSION_GITEXTRA_ADDR 0xe000701cL -#define CSR_VERSION_GITEXTRA_SIZE 2 -static inline unsigned short int version_gitextra_read(void) { - unsigned short int r = csr_readl(0xe000701cL); - r <<= 8; - r |= csr_readl(0xe0007020L); - return r; -} -#define CSR_VERSION_DIRTY_ADDR 0xe0007024L -#define CSR_VERSION_DIRTY_SIZE 1 -static inline unsigned char version_dirty_read(void) { - unsigned char r = csr_readl(0xe0007024L); - return r; -} -#define CSR_VERSION_DIRTY_DIRTY_OFFSET 0 -#define CSR_VERSION_DIRTY_DIRTY_SIZE 1 -#define CSR_VERSION_MODEL_ADDR 0xe0007028L -#define CSR_VERSION_MODEL_SIZE 1 -static inline unsigned char version_model_read(void) { - unsigned char r = csr_readl(0xe0007028L); - return r; -} -#define CSR_VERSION_MODEL_MODEL_OFFSET 0 -#define CSR_VERSION_MODEL_MODEL_SIZE 8 -#define CSR_VERSION_SEED_ADDR 0xe000702cL -#define CSR_VERSION_SEED_SIZE 4 -static inline unsigned int version_seed_read(void) { - unsigned int r = csr_readl(0xe000702cL); - r <<= 8; - r |= csr_readl(0xe0007030L); - r <<= 8; - r |= csr_readl(0xe0007034L); - r <<= 8; - r |= csr_readl(0xe0007038L); - return r; -} - -/* constants */ -#define TIMER0_INTERRUPT 2 -static inline int timer0_interrupt_read(void) { - return 2; -} -#define USB_INTERRUPT 3 -static inline int usb_interrupt_read(void) { - return 3; -} -#define CONFIG_BITSTREAM_SYNC_HEADER1 2123999870 -static inline int config_bitstream_sync_header1_read(void) { - return 2123999870; -} -#define CONFIG_BITSTREAM_SYNC_HEADER2 2125109630 -static inline int config_bitstream_sync_header2_read(void) { - return 2125109630; -} -#define CONFIG_CLOCK_FREQUENCY 12000000 -static inline int config_clock_frequency_read(void) { - return 12000000; -} -#define CONFIG_CPU_RESET_ADDR 0 -static inline int config_cpu_reset_addr_read(void) { - return 0; -} -#define CONFIG_CPU_TYPE "VEXRISCV" -static inline const char * config_cpu_type_read(void) { - return "VEXRISCV"; -} -#define CONFIG_CPU_TYPE_VEXRISCV 1 -static inline int config_cpu_type_vexriscv_read(void) { - return 1; -} -#define CONFIG_CPU_VARIANT "MIN" -static inline const char * config_cpu_variant_read(void) { - return "MIN"; -} -#define CONFIG_CPU_VARIANT_MIN 1 -static inline int config_cpu_variant_min_read(void) { - return 1; -} -#define CONFIG_CSR_ALIGNMENT 32 -static inline int config_csr_alignment_read(void) { - return 32; -} -#define CONFIG_CSR_DATA_WIDTH 8 -static inline int config_csr_data_width_read(void) { - return 8; -} - -#endif diff --git a/tinyusb/hw/bsp/fomu/include/hw/common.h b/tinyusb/hw/bsp/fomu/include/hw/common.h deleted file mode 100755 index 6a97ca2e..00000000 --- a/tinyusb/hw/bsp/fomu/include/hw/common.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef _HW_COMMON_H_ -#define _HW_COMMON_H_ -#include <stdint.h> -static inline void csr_writeb(uint8_t value, uint32_t addr) -{ - *((volatile uint8_t *)addr) = value; -} - -static inline uint8_t csr_readb(uint32_t addr) -{ - return *(volatile uint8_t *)addr; -} - -static inline void csr_writew(uint16_t value, uint32_t addr) -{ - *((volatile uint16_t *)addr) = value; -} - -static inline uint16_t csr_readw(uint32_t addr) -{ - return *(volatile uint16_t *)addr; -} - -static inline void csr_writel(uint32_t value, uint32_t addr) -{ - *((volatile uint32_t *)addr) = value; -} - -static inline uint32_t csr_readl(uint32_t addr) -{ - return *(volatile uint32_t *)addr; -} -#endif /* _HW_COMMON_H_ */
\ No newline at end of file diff --git a/tinyusb/hw/bsp/fomu/include/irq.h b/tinyusb/hw/bsp/fomu/include/irq.h deleted file mode 100755 index a8221890..00000000 --- a/tinyusb/hw/bsp/fomu/include/irq.h +++ /dev/null @@ -1,71 +0,0 @@ -#ifndef __IRQ_H -#define __IRQ_H - -#ifdef __cplusplus -extern "C" { -#endif - - -#define CSR_MSTATUS_MIE 0x8 - -#define CSR_IRQ_MASK 0xBC0 -#define CSR_IRQ_PENDING 0xFC0 - -#define CSR_DCACHE_INFO 0xCC0 - -#define csrr(reg) ({ unsigned long __tmp; \ - asm volatile ("csrr %0, " #reg : "=r"(__tmp)); \ - __tmp; }) - -#define csrw(reg, val) ({ \ - if (__builtin_constant_p(val) && (unsigned long)(val) < 32) \ - asm volatile ("csrw " #reg ", %0" :: "i"(val)); \ - else \ - asm volatile ("csrw " #reg ", %0" :: "r"(val)); }) - -#define csrs(reg, bit) ({ \ - if (__builtin_constant_p(bit) && (unsigned long)(bit) < 32) \ - asm volatile ("csrrs x0, " #reg ", %0" :: "i"(bit)); \ - else \ - asm volatile ("csrrs x0, " #reg ", %0" :: "r"(bit)); }) - -#define csrc(reg, bit) ({ \ - if (__builtin_constant_p(bit) && (unsigned long)(bit) < 32) \ - asm volatile ("csrrc x0, " #reg ", %0" :: "i"(bit)); \ - else \ - asm volatile ("csrrc x0, " #reg ", %0" :: "r"(bit)); }) - -static inline unsigned int irq_getie(void) -{ - return (csrr(mstatus) & CSR_MSTATUS_MIE) != 0; -} - -static inline void irq_setie(unsigned int ie) -{ - if(ie) csrs(mstatus,CSR_MSTATUS_MIE); else csrc(mstatus,CSR_MSTATUS_MIE); -} - -static inline unsigned int irq_getmask(void) -{ - unsigned int mask; - asm volatile ("csrr %0, %1" : "=r"(mask) : "i"(CSR_IRQ_MASK)); - return mask; -} - -static inline void irq_setmask(unsigned int mask) -{ - asm volatile ("csrw %0, %1" :: "i"(CSR_IRQ_MASK), "r"(mask)); -} - -static inline unsigned int irq_pending(void) -{ - unsigned int pending; - asm volatile ("csrr %0, %1" : "=r"(pending) : "i"(CSR_IRQ_PENDING)); - return pending; -} - -#ifdef __cplusplus -} -#endif - -#endif /* __IRQ_H */
\ No newline at end of file diff --git a/tinyusb/hw/bsp/fomu/output_format.ld b/tinyusb/hw/bsp/fomu/output_format.ld deleted file mode 100755 index 5e76f5f4..00000000 --- a/tinyusb/hw/bsp/fomu/output_format.ld +++ /dev/null @@ -1 +0,0 @@ -OUTPUT_FORMAT("elf32-littleriscv") diff --git a/tinyusb/hw/bsp/fomu/regions.ld b/tinyusb/hw/bsp/fomu/regions.ld deleted file mode 100755 index 51811f66..00000000 --- a/tinyusb/hw/bsp/fomu/regions.ld +++ /dev/null @@ -1,6 +0,0 @@ -MEMORY { - csr : ORIGIN = 0x60000000, LENGTH = 0x01000000 - vexriscv_debug : ORIGIN = 0xf00f0000, LENGTH = 0x00000100 - sram : ORIGIN = 0x10000000, LENGTH = 0x00020000 - rom : ORIGIN = 0x00000000, LENGTH = 0x00002000 -} diff --git a/tinyusb/hw/bsp/frdm_k32l2b/board.h b/tinyusb/hw/bsp/frdm_k32l2b/board.h deleted file mode 100755 index 82536791..00000000 --- a/tinyusb/hw/bsp/frdm_k32l2b/board.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - - -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "fsl_device_registers.h" - -// LED -#define LED_PIN_CLOCK kCLOCK_PortD -#define LED_GPIO GPIOD -#define LED_PORT PORTD -#define LED_PIN 5 -#define LED_STATE_ON 0 - -// SW3 button1 -#define BUTTON_PIN_CLOCK kCLOCK_PortC -#define BUTTON_GPIO GPIOC -#define BUTTON_PORT PORTC -#define BUTTON_PIN 3 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_PORT LPUART0 -#define UART_PIN_CLOCK kCLOCK_PortA -#define UART_PIN_PORT PORTA -#define UART_PIN_RX 1u -#define UART_PIN_TX 2u -#define SOPT5_LPUART0RXSRC_LPUART_RX 0x00u /*!<@brief LPUART0 Receive Data Source Select: LPUART_RX pin */ -#define SOPT5_LPUART0TXSRC_LPUART_TX 0x00u /*!<@brief LPUART0 Transmit Data Source Select: LPUART0_TX pin */ - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/frdm_k32l2b/board.mk b/tinyusb/hw/bsp/frdm_k32l2b/board.mk deleted file mode 100755 index 56df553d..00000000 --- a/tinyusb/hw/bsp/frdm_k32l2b/board.mk +++ /dev/null @@ -1,51 +0,0 @@ -SDK_DIR = hw/mcu/nxp/mcux-sdk -DEPS_SUBMODULES += $(SDK_DIR) - -CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ - -DCPU_K32L2B31VLH0A \ - -DCFG_TUSB_MCU=OPT_MCU_K32L2BXX - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter - -MCU_DIR = $(SDK_DIR)/devices/K32L2B31A - -# All source paths should be relative to the top level. -LD_FILE = $(MCU_DIR)/gcc/K32L2B31xxxxA_flash.ld - -SRC_C += \ - src/portable/nxp/khci/dcd_khci.c \ - $(MCU_DIR)/system_K32L2B31A.c \ - $(MCU_DIR)/project_template/clock_config.c \ - $(MCU_DIR)/drivers/fsl_clock.c \ - $(SDK_DIR)/drivers/gpio/fsl_gpio.c \ - $(SDK_DIR)/drivers/lpuart/fsl_lpuart.c - -INC += \ - $(TOP)/hw/bsp/$(BOARD) \ - $(TOP)/$(SDK_DIR)/CMSIS/Include \ - $(TOP)/$(SDK_DIR)/drivers/smc \ - $(TOP)/$(SDK_DIR)/drivers/common \ - $(TOP)/$(SDK_DIR)/drivers/gpio \ - $(TOP)/$(SDK_DIR)/drivers/port \ - $(TOP)/$(SDK_DIR)/drivers/lpuart \ - $(TOP)/$(MCU_DIR) \ - $(TOP)/$(MCU_DIR)/drivers \ - $(TOP)/$(MCU_DIR)/project_template \ - -SRC_S += $(MCU_DIR)/gcc/startup_K32L2B31A.S - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = MKL25Z128xxx4 - -# For flash-pyocd target -PYOCD_TARGET = K32L2B - -# flash using pyocd -flash: flash-pyocd diff --git a/tinyusb/hw/bsp/frdm_k32l2b/frdm_k32l2b.c b/tinyusb/hw/bsp/frdm_k32l2b/frdm_k32l2b.c deleted file mode 100755 index c45095ca..00000000 --- a/tinyusb/hw/bsp/frdm_k32l2b/frdm_k32l2b.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2018, hathach (tinyusb.org) - * Copyright (c) 2020, Koji Kitayama - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../board.h" -#include "board.h" -#include "fsl_gpio.h" -#include "fsl_port.h" -#include "fsl_clock.h" -#include "fsl_lpuart.h" - -#include "clock_config.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ - tud_int_handler(0); -} - -void board_init(void) -{ - /* Enable port clocks for UART/LED/Button pins */ - CLOCK_EnableClock(UART_PIN_CLOCK); - CLOCK_EnableClock(LED_PIN_CLOCK); - CLOCK_EnableClock(BUTTON_PIN_CLOCK); - - gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0 }; - GPIO_PinInit(LED_GPIO, LED_PIN, &led_config); - PORT_SetPinMux(LED_PORT, LED_PIN, kPORT_MuxAsGpio); - - gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0 }; - GPIO_PinInit(BUTTON_GPIO, BUTTON_PIN, &button_config); - const port_pin_config_t BUTTON_CFG = { - kPORT_PullUp, - kPORT_FastSlewRate, - kPORT_PassiveFilterDisable, - kPORT_LowDriveStrength, - kPORT_MuxAsGpio - }; - PORT_SetPinConfig(BUTTON_PORT, BUTTON_PIN, &BUTTON_CFG); - - /* PORTA1 (pin 23) is configured as LPUART0_RX */ - PORT_SetPinMux(PORTA, 1U, kPORT_MuxAlt2); - /* PORTA2 (pin 24) is configured as LPUART0_TX */ - PORT_SetPinMux(PORTA, 2U, kPORT_MuxAlt2); - - SIM->SOPT5 = ((SIM->SOPT5 & - /* Mask bits to zero which are setting */ - (~(SIM_SOPT5_LPUART0TXSRC_MASK | SIM_SOPT5_LPUART0RXSRC_MASK))) - /* LPUART0 Transmit Data Source Select: LPUART0_TX pin. */ - | SIM_SOPT5_LPUART0TXSRC(SOPT5_LPUART0TXSRC_LPUART_TX) - /* LPUART0 Receive Data Source Select: LPUART_RX pin. */ - | SIM_SOPT5_LPUART0RXSRC(SOPT5_LPUART0RXSRC_LPUART_RX)); - - BOARD_BootClockRUN(); - SystemCoreClockUpdate(); - CLOCK_SetLpuart0Clock(1); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - lpuart_config_t uart_config; - LPUART_GetDefaultConfig(&uart_config); - uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; - uart_config.enableTx = true; - uart_config.enableRx = true; - LPUART_Init(UART_PORT, &uart_config, CLOCK_GetFreq(kCLOCK_McgIrc48MClk)); - - // USB - CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcIrc48M, 48000000U); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - GPIO_PinWrite(LED_GPIO, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_GPIO, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - LPUART_ReadBlocking(UART_PORT, buf, len); - return len; -} - -int board_uart_write(void const * buf, int len) -{ - LPUART_WriteBlocking(UART_PORT, (uint8_t*)buf, len); - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/tinyusb/hw/bsp/frdm_kl25z/board.mk b/tinyusb/hw/bsp/frdm_kl25z/board.mk deleted file mode 100755 index 451bc37c..00000000 --- a/tinyusb/hw/bsp/frdm_kl25z/board.mk +++ /dev/null @@ -1,46 +0,0 @@ -SDK_DIR = hw/mcu/nxp/nxp_sdk -DEPS_SUBMODULES += $(SDK_DIR) - -CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ - -DCPU_MKL25Z128VLK4 \ - -DCFG_TUSB_MCU=OPT_MCU_MKL25ZXX - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter - -MCU_DIR = $(SDK_DIR)/devices/MKL25Z4 - -# All source paths should be relative to the top level. -LD_FILE = $(MCU_DIR)/gcc/MKL25Z128xxx4_flash.ld - -SRC_C += \ - src/portable/nxp/khci/dcd_khci.c \ - $(MCU_DIR)/system_MKL25Z4.c \ - $(MCU_DIR)/project_template/clock_config.c \ - $(MCU_DIR)/drivers/fsl_clock.c \ - $(MCU_DIR)/drivers/fsl_gpio.c \ - $(MCU_DIR)/drivers/fsl_lpsci.c - -INC += \ - $(TOP)/hw/bsp/$(BOARD) \ - $(TOP)/$(SDK_DIR)/CMSIS/Include \ - $(TOP)/$(MCU_DIR) \ - $(TOP)/$(MCU_DIR)/drivers \ - $(TOP)/$(MCU_DIR)/project_template \ - -SRC_S += $(MCU_DIR)/gcc/startup_MKL25Z4.S - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = MKL25Z128xxx4 - -# For flash-pyocd target -PYOCD_TARGET = mkl25zl128 - -# flash using pyocd -flash: flash-pyocd diff --git a/tinyusb/hw/bsp/frdm_kl25z/frdm_kl25z.c b/tinyusb/hw/bsp/frdm_kl25z/frdm_kl25z.c deleted file mode 100755 index 7d3a173e..00000000 --- a/tinyusb/hw/bsp/frdm_kl25z/frdm_kl25z.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2018, hathach (tinyusb.org) - * Copyright (c) 2020, Koji Kitayama - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../board.h" -#include "fsl_device_registers.h" -#include "fsl_gpio.h" -#include "fsl_port.h" -#include "fsl_clock.h" -#include "fsl_lpsci.h" - -#include "clock_config.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ -// LED -#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 -#define LED_PORT GPIOB -#define LED_PIN_CLOCK kCLOCK_PortB -#define LED_PIN_PORT PORTB -#define LED_PIN 19U -#define LED_PIN_FUNCTION kPORT_MuxAsGpio -#define LED_STATE_ON 0 - -// UART -#define UART_PORT UART0 -#define UART_PIN_CLOCK kCLOCK_PortA -#define UART_PIN_PORT PORTA -#define UART_PIN_RX 1u -#define UART_PIN_TX 2u -#define UART_PIN_FUNCTION kPORT_MuxAlt2 -#define SOPT5_UART0RXSRC_UART_RX 0x00u /*!< UART0 receive data source select: UART0_RX pin */ -#define SOPT5_UART0TXSRC_UART_TX 0x00u /*!< UART0 transmit data source select: UART0_TX pin */ - -const uint8_t dcd_data[] = { 0x00 }; - -void board_init(void) -{ - BOARD_BootClockRUN(); - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - // LED - CLOCK_EnableClock(LED_PIN_CLOCK); - PORT_SetPinMux(LED_PIN_PORT, LED_PIN, LED_PIN_FUNCTION); - gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0 }; - GPIO_PinInit(LED_PORT, LED_PIN, &led_config); - board_led_write(true); - - // UART - CLOCK_EnableClock(UART_PIN_CLOCK); - PORT_SetPinMux(UART_PIN_PORT, UART_PIN_RX, UART_PIN_FUNCTION); - PORT_SetPinMux(UART_PIN_PORT, UART_PIN_TX, UART_PIN_FUNCTION); - SIM->SOPT5 = ((SIM->SOPT5 & - (~(SIM_SOPT5_UART0TXSRC_MASK | SIM_SOPT5_UART0RXSRC_MASK))) - | SIM_SOPT5_UART0TXSRC(SOPT5_UART0TXSRC_UART_TX) - | SIM_SOPT5_UART0RXSRC(SOPT5_UART0RXSRC_UART_RX) - ); - - lpsci_config_t uart_config; - CLOCK_SetLpsci0Clock(1); - LPSCI_GetDefaultConfig(&uart_config); - uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; - uart_config.enableTx = true; - uart_config.enableRx = true; - LPSCI_Init(UART_PORT, &uart_config, CLOCK_GetPllFllSelClkFreq()); - - // USB - CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcPll0, CLOCK_GetFreq(kCLOCK_PllFllSelClk)); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - GPIO_WritePinOutput(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - LPSCI_ReadBlocking(UART_PORT, buf, len); - return len; -} - -int board_uart_write(void const * buf, int len) -{ - LPSCI_WriteBlocking(UART_PORT, (uint8_t*)buf, len); - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/tinyusb/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.h b/tinyusb/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.h deleted file mode 100755 index fae7c40b..00000000 --- a/tinyusb/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _NUCLEI_SDK_HAL_H -#define _NUCLEI_SDK_HAL_H - -#include "gd32vf103c_longan_nano.h" - -// 4 bits for interrupt level, 0 for priority. -// level 0 = lowest priority, level 15 = highest priority. -#define __ECLIC_INTCTLBITS 4 - -#define __SYSTEM_CLOCK 72000000 -#define HXTAL_VALUE ((uint32_t)8000000) - -#define SOC_DEBUG_UART GD32_COM0 - -#define DBG_KEY_UNLOCK 0x4B5A6978 -#define DBG_CMD_RESET 0x1 -#define DBG_KEY REG32(DBG + 0x0C) -#define DBG_CMD REG32(DBG + 0x08) - -#endif diff --git a/tinyusb/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.mk b/tinyusb/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.mk deleted file mode 100755 index 3b894445..00000000 --- a/tinyusb/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.mk +++ /dev/null @@ -1,13 +0,0 @@ -LONGAN_NANO_SDK_BSP = $(GD32VF103_SDK_SOC)/Board/gd32vf103c_longan_nano -LINKER_SCRIPTS = $(LONGAN_NANO_SDK_BSP)/Source/GCC - -# All source paths should be relative to the top level. -LD_FILE = $(LINKER_SCRIPTS)/gcc_gd32vf103xb_flashxip.ld # Longan Nano 128k ROM 32k RAM -#LD_FILE = $(LINKER_SCRIPTS)/gcc_gd32vf103x8_flashxip.ld # Longan Nano Lite 64k ROM 20k RAM - -SRC_C += $(LONGAN_NANO_SDK_BSP)/Source/gd32vf103c_longan_nano.c -INC += $(TOP)/$(LONGAN_NANO_SDK_BSP)/Include - -# Longan Nano 128k ROM 32k RAM -JLINK_DEVICE = gd32vf103cbt6 -#JLINK_DEVICE = gd32vf103c8t6 # Longan Nano Lite 64k ROM 20k RAM diff --git a/tinyusb/hw/bsp/gd32vf103/family.c b/tinyusb/hw/bsp/gd32vf103/family.c deleted file mode 100755 index d76fb9a2..00000000 --- a/tinyusb/hw/bsp/gd32vf103/family.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "board.h" -#include "drv_usb_hw.h" -#include "drv_usb_dev.h" - -#include "../board.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ - -void USBFS_IRQHandler(void) { tud_int_handler(0); } - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -#define USB_NO_VBUS_PIN - -// According to GD32VF103 user manual clock tree: -// Systick clock = AHB clock / 4. -#define TIMER_TICKS ((SystemCoreClock / 4) / 1000) - -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - -#define UART_DEV SOC_DEBUG_UART - -#define LED_PIN LED_R - -void board_init(void) { - /* Disable interrupts during init */ - __disable_irq(); - -#if CFG_TUSB_OS == OPT_OS_NONE - SysTick_Config(TIMER_TICKS); -#endif - - rcu_periph_clock_enable(RCU_GPIOA); - rcu_periph_clock_enable(RCU_GPIOB); - rcu_periph_clock_enable(RCU_GPIOC); - rcu_periph_clock_enable(RCU_GPIOD); - rcu_periph_clock_enable(RCU_AF); - -#ifdef BUTTON_PIN - gpio_init(BUTTON_PORT, GPIO_MODE_IN_FLOATING, GPIO_OSPEED_50MHZ, BUTTON_PIN); -#endif - -#ifdef LED_PIN - gd_led_init(LED_PIN); -#endif - -#if defined(UART_DEV) - gd_com_init(UART_DEV); -#endif - - /* USB D+ and D- pins don't need to be configured. */ - /* Configure VBUS Pin */ -#ifndef USB_NO_VBUS_PIN - gpio_init(GPIOA, GPIO_MODE_IN_FLOATING, GPIO_OSPEED_50MHZ, GPIO_PIN_9); -#endif - - /* This for ID line debug */ - // gpio_init(GPIOA, GPIO_MODE_AF_OD, GPIO_OSPEED_50MHZ, GPIO_PIN_10); - - /* Enable USB OTG clock */ - usb_rcu_config(); - - /* Reset USB OTG peripheral */ - rcu_periph_reset_enable(RCU_USBFSRST); - rcu_periph_reset_disable(RCU_USBFSRST); - - /* Configure USBFS IRQ */ - ECLIC_Register_IRQ(USBFS_IRQn, ECLIC_NON_VECTOR_INTERRUPT, - ECLIC_POSTIVE_EDGE_TRIGGER, 3, 0, NULL); - - /* Retrieve otg core registers */ - usb_gr* otg_core_regs = (usb_gr*)(USBFS_REG_BASE + USB_REG_OFFSET_CORE); - -#ifdef USB_NO_VBUS_PIN - /* Disable VBUS sense*/ - otg_core_regs->GCCFG |= GCCFG_VBUSIG | GCCFG_PWRON | GCCFG_VBUSBCEN; -#else - /* Enable VBUS sense via pin PA9 */ - otg_core_regs->GCCFG |= GCCFG_VBUSIG | GCCFG_PWRON | GCCFG_VBUSBCEN; - otg_core_regs->GCCFG &= ~GCCFG_VBUSIG; -#endif - - /* Enable interrupts globaly */ - __enable_irq(); -} - -void gd32vf103_reset(void) { - /* The MTIMER unit of the GD32VF103 doesn't have the MSFRST - * register to generate a software reset request. - * BUT instead two undocumented registers in the debug peripheral - * that allow issueing a software reset. - * https://github.com/esmil/gd32vf103inator/blob/master/include/gd32vf103/dbg.h - */ - DBG_KEY = DBG_KEY_UNLOCK; - DBG_CMD = DBG_CMD_RESET; -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) { - state ? gd_led_on(LED_PIN) : gd_led_off(LED_PIN); -} - -uint32_t board_button_read(void) { - return BUTTON_STATE_ACTIVE == gpio_input_bit_get(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) { -#if defined(UART_DEV) - int rxsize = len; - while (rxsize--) { - *(uint8_t*)buf = usart_read(UART_DEV); - buf++; - } - return len; -#else - (void)buf; - (void)len; - return 0; -#endif -} - -int board_uart_write(void const* buf, int len) { -#if defined(UART_DEV) - int txsize = len; - while (txsize--) { - usart_write(UART_DEV, *(uint8_t*)buf); - buf++; - } - return len; -#else - (void)buf; - (void)len; - return 0; -#endif -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void eclic_mtip_handler(void) { - system_ticks++; - SysTick_Reload(TIMER_TICKS); -} -uint32_t board_millis(void) { return system_ticks; } -#endif - -#ifdef USE_FULL_ASSERT -/** - * @brief Reports the name of the source file and the source line number - * where the assert_param error has occurred. - * @param file: pointer to the source file name - * @param line: assert_param error line source number - * @retval None - */ -void assert_failed(char* file, uint32_t line) { - /* USER CODE BEGIN 6 */ - /* User can add his own implementation to report the file name and line - number, - tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) - */ - /* USER CODE END 6 */ -} -#endif /* USE_FULL_ASSERT */ diff --git a/tinyusb/hw/bsp/gd32vf103/family.mk b/tinyusb/hw/bsp/gd32vf103/family.mk deleted file mode 100755 index 9148e7f8..00000000 --- a/tinyusb/hw/bsp/gd32vf103/family.mk +++ /dev/null @@ -1,68 +0,0 @@ -# https://www.embecosm.com/resources/tool-chain-downloads/#riscv-stable -#CROSS_COMPILE ?= riscv32-unknown-elf- - -# Toolchain from https://nucleisys.com/download.php -#CROSS_COMPILE ?= riscv-nuclei-elf- - -# Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack -CROSS_COMPILE ?= riscv-none-embed- - -# Submodules -NUCLEI_SDK = hw/mcu/gd/nuclei-sdk -DEPS_SUBMODULES += $(NUCLEI_SDK) - -# Nuclei-SDK paths -GD32VF103_SDK_SOC = $(NUCLEI_SDK)/SoC/gd32vf103 -GD32VF103_SDK_DRIVER = $(GD32VF103_SDK_SOC)/Common/Source/Drivers -LIBC_STUBS = $(GD32VF103_SDK_SOC)/Common/Source/Stubs -STARTUP_ASM = $(GD32VF103_SDK_SOC)/Common/Source/GCC - -include $(TOP)/$(BOARD_PATH)/board.mk - -SKIP_NANOLIB = 1 - -CFLAGS += \ - -march=rv32imac \ - -mabi=ilp32 \ - -mcmodel=medlow \ - -mstrict-align \ - -nostdlib -nostartfiles \ - -DCFG_TUSB_MCU=OPT_MCU_GD32VF103 \ - -DDOWNLOAD_MODE=DOWNLOAD_MODE_FLASHXIP \ - -DGD32VF103 - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter - -SRC_C += \ - src/portable/st/synopsys/dcd_synopsys.c \ - $(GD32VF103_SDK_DRIVER)/gd32vf103_rcu.c \ - $(GD32VF103_SDK_DRIVER)/gd32vf103_gpio.c \ - $(GD32VF103_SDK_DRIVER)/Usb/gd32vf103_usb_hw.c \ - $(GD32VF103_SDK_DRIVER)/gd32vf103_usart.c \ - $(LIBC_STUBS)/sbrk.c \ - $(LIBC_STUBS)/close.c \ - $(LIBC_STUBS)/isatty.c \ - $(LIBC_STUBS)/fstat.c \ - $(LIBC_STUBS)/lseek.c \ - $(LIBC_STUBS)/read.c - -SRC_S += \ - $(STARTUP_ASM)/startup_gd32vf103.S \ - $(STARTUP_ASM)/intexc_gd32vf103.S - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(NUCLEI_SDK)/NMSIS/Core/Include \ - $(TOP)/$(GD32VF103_SDK_SOC)/Common/Include \ - $(TOP)/$(GD32VF103_SDK_SOC)/Common/Include/Usb - -# For freeRTOS port source -FREERTOS_PORT = RISC-V - -# For flash-jlink target -JLINK_IF = jtag - -# flash target ROM bootloader -flash: $(BUILD)/$(PROJECT).bin - dfu-util -R -a 0 --dfuse-address 0x08000000 -D $< diff --git a/tinyusb/hw/bsp/gd32vf103/system_gd32vf103.c b/tinyusb/hw/bsp/gd32vf103/system_gd32vf103.c deleted file mode 100755 index 29518a54..00000000 --- a/tinyusb/hw/bsp/gd32vf103/system_gd32vf103.c +++ /dev/null @@ -1,668 +0,0 @@ -/*! - \file system_gd32vf103.h -\brief RISC-V Device Peripheral Access Layer Source File for - GD32VF103 Device Series - -*/ - -/* - Copyright (c) 2020, GigaDevice Semiconductor Inc. - - Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, this - list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation - and/or other materials provided with the distribution. - 3. Neither the name of the copyright holder nor the names of its contributors - may be used to endorse or promote products derived from this software without - specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, -INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY -OF SUCH DAMAGE. -*/ - -/* This file refers the RISC-V standard, some adjustments are made according to GigaDevice chips */ -#include "board.h" - -/* system frequency define */ -#define __IRC8M (IRC8M_VALUE) /* internal 8 MHz RC oscillator frequency */ -#define __HXTAL (HXTAL_VALUE) /* high speed crystal oscillator frequency */ -#define __SYS_OSC_CLK (__IRC8M) /* main oscillator frequency */ -#define __SYSTEM_CLOCK_HXTAL (HXTAL_VALUE) - -#if !defined(__SYSTEM_CLOCK) -#define __SYSTEM_CLOCK 72000000 -#endif - -#if __SYSTEM_CLOCK == 48000000 - #define __SYSTEM_CLOCK_48M_PLL_HXTAL (uint32_t)(48000000) - uint32_t SystemCoreClock = __SYSTEM_CLOCK_48M_PLL_HXTAL; - static void system_clock_48m_hxtal(void); - -#elif __SYSTEM_CLOCK == 72000000 - #define __SYSTEM_CLOCK_72M_PLL_HXTAL (uint32_t)(72000000) - uint32_t SystemCoreClock = __SYSTEM_CLOCK_72M_PLL_HXTAL; - static void system_clock_72m_hxtal(void); - -#elif __SYSTEM_CLOCK == 96000000 - #define __SYSTEM_CLOCK_96M_PLL_HXTAL (uint32_t)(96000000) - uint32_t SystemCoreClock = __SYSTEM_CLOCK_96M_PLL_HXTAL; - static void system_clock_96m_hxtal(void); - -#else -#error No valid system clock configuration set! -#endif - -/* configure the system clock */ -static void system_clock_config(void); - -/*! - \brief configure the system clock - \param[in] none - \param[out] none - \retval none -*/ -static void system_clock_config(void) -{ -#if defined (__SYSTEM_CLOCK_48M_PLL_HXTAL) - system_clock_48m_hxtal(); -#elif defined (__SYSTEM_CLOCK_72M_PLL_HXTAL) - system_clock_72m_hxtal(); -#elif defined (__SYSTEM_CLOCK_96M_PLL_HXTAL) - system_clock_96m_hxtal(); -#endif /* __SYSTEM_CLOCK_HXTAL */ -} - -/*! - \brief setup the microcontroller system, initialize the system - \param[in] none - \param[out] none - \retval none -*/ -void SystemInit(void) -{ - /* reset the RCC clock configuration to the default reset state */ - /* enable IRC8M */ - RCU_CTL |= RCU_CTL_IRC8MEN; - - /* reset SCS, AHBPSC, APB1PSC, APB2PSC, ADCPSC, CKOUT0SEL bits */ - RCU_CFG0 &= ~(RCU_CFG0_SCS | RCU_CFG0_AHBPSC | RCU_CFG0_APB1PSC | RCU_CFG0_APB2PSC | - RCU_CFG0_ADCPSC | RCU_CFG0_ADCPSC_2 | RCU_CFG0_CKOUT0SEL); - - /* reset HXTALEN, CKMEN, PLLEN bits */ - RCU_CTL &= ~(RCU_CTL_HXTALEN | RCU_CTL_CKMEN | RCU_CTL_PLLEN); - - /* Reset HXTALBPS bit */ - RCU_CTL &= ~(RCU_CTL_HXTALBPS); - - /* reset PLLSEL, PREDV0_LSB, PLLMF, USBFSPSC bits */ - - RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PREDV0_LSB | RCU_CFG0_PLLMF | - RCU_CFG0_USBFSPSC | RCU_CFG0_PLLMF_4); - RCU_CFG1 = 0x00000000U; - - /* Reset HXTALEN, CKMEN, PLLEN, PLL1EN and PLL2EN bits */ - RCU_CTL &= ~(RCU_CTL_PLLEN | RCU_CTL_PLL1EN | RCU_CTL_PLL2EN | RCU_CTL_CKMEN | RCU_CTL_HXTALEN); - /* disable all interrupts */ - RCU_INT = 0x00FF0000U; - - /* Configure the System clock source, PLL Multiplier, AHB/APBx prescalers and Flash settings */ - system_clock_config(); -} - -/*! - \brief update the SystemCoreClock with current core clock retrieved from cpu registers - \param[in] none - \param[out] none - \retval none -*/ -void SystemCoreClockUpdate(void) -{ - uint32_t scss; - uint32_t pllsel, predv0sel, pllmf, ck_src; - uint32_t predv0, predv1, pll1mf; - - scss = GET_BITS(RCU_CFG0, 2, 3); - - switch (scss) - { - /* IRC8M is selected as CK_SYS */ - case SEL_IRC8M: - SystemCoreClock = IRC8M_VALUE; - break; - - /* HXTAL is selected as CK_SYS */ - case SEL_HXTAL: - SystemCoreClock = HXTAL_VALUE; - break; - - /* PLL is selected as CK_SYS */ - case SEL_PLL: - /* PLL clock source selection, HXTAL or IRC8M/2 */ - pllsel = (RCU_CFG0 & RCU_CFG0_PLLSEL); - - - if(RCU_PLLSRC_IRC8M_DIV2 == pllsel){ - /* PLL clock source is IRC8M/2 */ - ck_src = IRC8M_VALUE / 2U; - }else{ - /* PLL clock source is HXTAL */ - ck_src = HXTAL_VALUE; - - predv0sel = (RCU_CFG1 & RCU_CFG1_PREDV0SEL); - - /* source clock use PLL1 */ - if(RCU_PREDV0SRC_CKPLL1 == predv0sel){ - predv1 = ((RCU_CFG1 & RCU_CFG1_PREDV1) >> 4) + 1U; - pll1mf = ((RCU_CFG1 & RCU_CFG1_PLL1MF) >> 8) + 2U; - if(17U == pll1mf){ - pll1mf = 20U; - } - ck_src = (ck_src / predv1) * pll1mf; - } - predv0 = (RCU_CFG1 & RCU_CFG1_PREDV0) + 1U; - ck_src /= predv0; - } - - /* PLL multiplication factor */ - pllmf = GET_BITS(RCU_CFG0, 18, 21); - - if((RCU_CFG0 & RCU_CFG0_PLLMF_4)){ - pllmf |= 0x10U; - } - - if(pllmf >= 15U){ - pllmf += 1U; - }else{ - pllmf += 2U; - } - - SystemCoreClock = ck_src * pllmf; - - if(15U == pllmf){ - /* PLL source clock multiply by 6.5 */ - SystemCoreClock = ck_src * 6U + ck_src / 2U; - } - - break; - - /* IRC8M is selected as CK_SYS */ - default: - SystemCoreClock = IRC8M_VALUE; - break; - } -} - -#if defined (__SYSTEM_CLOCK_48M_PLL_HXTAL) -/*! - \brief configure the system clock to 48M by PLL which selects HXTAL(MD/HD/XD:8M; CL:25M) as its clock source - \param[in] none - \param[out] none - \retval none -*/ -static void system_clock_48m_hxtal(void) -{ - uint32_t timeout = 0U; - uint32_t stab_flag = 0U; - - /* enable HXTAL */ - RCU_CTL |= RCU_CTL_HXTALEN; - - /* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */ - do{ - timeout++; - stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB); - }while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout)); - - /* if fail */ - if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)){ - while(1){ - } - } - - /* HXTAL is stable */ - /* AHB = SYSCLK */ - RCU_CFG0 |= RCU_AHB_CKSYS_DIV1; - /* APB2 = AHB/1 */ - RCU_CFG0 |= RCU_APB2_CKAHB_DIV1; - /* APB1 = AHB/2 */ - RCU_CFG0 |= RCU_APB1_CKAHB_DIV2; - - /* CK_PLL = (CK_PREDIV0) * 12 = 48 MHz */ - RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); - RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_PLL_MUL12); - - if(HXTAL_VALUE==25000000){ - - /* CK_PREDIV0 = (CK_HXTAL)/5 *8 /10 = 4 MHz */ - RCU_CFG1 &= ~(RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0); - RCU_CFG1 |= (RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV5 | RCU_PREDV0_DIV10); - - /* enable PLL1 */ - RCU_CTL |= RCU_CTL_PLL1EN; - /* wait till PLL1 is ready */ - while((RCU_CTL & RCU_CTL_PLL1STB) == 0){ - } - - }else if(HXTAL_VALUE==8000000){ - RCU_CFG1 &= ~(RCU_CFG1_PREDV0SEL | RCU_CFG1_PREDV1 | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV0); - RCU_CFG1 |= (RCU_PREDV0SRC_HXTAL | RCU_PREDV0_DIV2 ); - } - - - - /* enable PLL */ - RCU_CTL |= RCU_CTL_PLLEN; - - /* wait until PLL is stable */ - while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){ - } - - /* select PLL as system clock */ - RCU_CFG0 &= ~RCU_CFG0_SCS; - RCU_CFG0 |= RCU_CKSYSSRC_PLL; - - /* wait until PLL is selected as system clock */ - while(0U == (RCU_CFG0 & RCU_SCSS_PLL)){ - } -} - -#elif defined (__SYSTEM_CLOCK_72M_PLL_HXTAL) -/*! - \brief configure the system clock to 72M by PLL which selects HXTAL(MD/HD/XD:8M; CL:25M) as its clock source - \param[in] none - \param[out] none - \retval none -*/ -static void system_clock_72m_hxtal(void) -{ - uint32_t timeout = 0U; - uint32_t stab_flag = 0U; - - /* enable HXTAL */ - RCU_CTL |= RCU_CTL_HXTALEN; - - /* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */ - do{ - timeout++; - stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB); - }while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout)); - - /* if fail */ - if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)){ - while(1){ - } - } - - /* HXTAL is stable */ - /* AHB = SYSCLK */ - RCU_CFG0 |= RCU_AHB_CKSYS_DIV1; - /* APB2 = AHB/1 */ - RCU_CFG0 |= RCU_APB2_CKAHB_DIV1; - /* APB1 = AHB/2 */ - RCU_CFG0 |= RCU_APB1_CKAHB_DIV2; - - /* CK_PLL = (CK_PREDIV0) * 18 = 72 MHz */ - RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); - RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_PLL_MUL18); - - - if(HXTAL_VALUE==25000000){ - - /* CK_PREDIV0 = (CK_HXTAL)/5 *8 /10 = 4 MHz */ - RCU_CFG1 &= ~(RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0); - RCU_CFG1 |= (RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV5 | RCU_PREDV0_DIV10); - - /* enable PLL1 */ - RCU_CTL |= RCU_CTL_PLL1EN; - /* wait till PLL1 is ready */ - while((RCU_CTL & RCU_CTL_PLL1STB) == 0){ - } - - }else if(HXTAL_VALUE==8000000){ - RCU_CFG1 &= ~(RCU_CFG1_PREDV0SEL | RCU_CFG1_PREDV1 | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV0); - RCU_CFG1 |= (RCU_PREDV0SRC_HXTAL | RCU_PREDV0_DIV2 ); - } - - /* enable PLL */ - RCU_CTL |= RCU_CTL_PLLEN; - - /* wait until PLL is stable */ - while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){ - } - - /* select PLL as system clock */ - RCU_CFG0 &= ~RCU_CFG0_SCS; - RCU_CFG0 |= RCU_CKSYSSRC_PLL; - - /* wait until PLL is selected as system clock */ - while(0U == (RCU_CFG0 & RCU_SCSS_PLL)){ - } -} - -#elif defined (__SYSTEM_CLOCK_96M_PLL_HXTAL) -/*! - \brief configure the system clock to 96M by PLL which selects HXTAL(MD/HD/XD:8M; CL:25M) as its clock source - \param[in] none - \param[out] none - \retval none -*/ -static void system_clock_96m_hxtal(void) -{ - uint32_t timeout = 0U; - uint32_t stab_flag = 0U; - - /* enable HXTAL */ - RCU_CTL |= RCU_CTL_HXTALEN; - - /* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */ - do{ - timeout++; - stab_flag = (RCU_CTL & RCU_CTL_HXTALSTB); - }while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout)); - - /* if fail */ - if(0U == (RCU_CTL & RCU_CTL_HXTALSTB)){ - while(1){ - } - } - - /* HXTAL is stable */ - /* AHB = SYSCLK */ - RCU_CFG0 |= RCU_AHB_CKSYS_DIV1; - /* APB2 = AHB/1 */ - RCU_CFG0 |= RCU_APB2_CKAHB_DIV1; - /* APB1 = AHB/2 */ - RCU_CFG0 |= RCU_APB1_CKAHB_DIV2; - - if(HXTAL_VALUE==25000000){ - - /* CK_PLL = (CK_PREDIV0) * 24 = 96 MHz */ - RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); - RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_PLL_MUL24); - - /* CK_PREDIV0 = (CK_HXTAL)/5 *8 /10 = 4 MHz */ - RCU_CFG1 &= ~(RCU_CFG1_PREDV0SEL | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV1 | RCU_CFG1_PREDV0); - RCU_CFG1 |= (RCU_PREDV0SRC_CKPLL1 | RCU_PLL1_MUL8 | RCU_PREDV1_DIV5 | RCU_PREDV0_DIV10); - /* enable PLL1 */ - RCU_CTL |= RCU_CTL_PLL1EN; - /* wait till PLL1 is ready */ - while((RCU_CTL & RCU_CTL_PLL1STB) == 0){ - } - - }else if(HXTAL_VALUE==8000000){ - /* CK_PLL = (CK_PREDIV0) * 24 = 96 MHz */ - RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); - RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_PLL_MUL24); - - RCU_CFG1 &= ~(RCU_CFG1_PREDV0SEL | RCU_CFG1_PREDV1 | RCU_CFG1_PLL1MF | RCU_CFG1_PREDV0); - RCU_CFG1 |= (RCU_PREDV0SRC_HXTAL | RCU_PREDV0_DIV2 ); - } - - /* enable PLL */ - RCU_CTL |= RCU_CTL_PLLEN; - - /* wait until PLL is stable */ - while(0U == (RCU_CTL & RCU_CTL_PLLSTB)){ - } - - /* select PLL as system clock */ - RCU_CFG0 &= ~RCU_CFG0_SCS; - RCU_CFG0 |= RCU_CKSYSSRC_PLL; - - /* wait until PLL is selected as system clock */ - while(0U == (RCU_CFG0 & RCU_SCSS_PLL)){ - } -} - -#endif - -/** - * \defgroup NMSIS_Core_IntExcNMI_Handling Interrupt and Exception and NMI Handling - * \brief Functions for interrupt, exception and nmi handle available in system_<device>.c. - * \details - * Nuclei provide a template for interrupt, exception and NMI handling. Silicon Vendor could adapat according - * to their requirement. Silicon vendor could implement interface for different exception code and - * replace current implementation. - * - * @{ - */ -/** \brief Max exception handler number, don't include the NMI(0xFFF) one */ -#define MAX_SYSTEM_EXCEPTION_NUM 12 -/** - * \brief Store the exception handlers for each exception ID - * \note - * - This SystemExceptionHandlers are used to store all the handlers for all - * the exception codes Nuclei N/NX core provided. - * - Exception code 0 - 11, totally 12 exceptions are mapped to SystemExceptionHandlers[0:11] - * - Exception for NMI is also re-routed to exception handling(exception code 0xFFF) in startup code configuration, the handler itself is mapped to SystemExceptionHandlers[MAX_SYSTEM_EXCEPTION_NUM] - */ -static unsigned long SystemExceptionHandlers[MAX_SYSTEM_EXCEPTION_NUM + 1]; - -/** - * \brief Exception Handler Function Typedef - * \note - * This typedef is only used internal in this system_gd32vf103.c file. - * It is used to do type conversion for registered exception handler before calling it. - */ -typedef void (*EXC_HANDLER)(unsigned long mcause, unsigned long sp); - -/** - * \brief System Default Exception Handler - * \details - * This function provided a default exception and NMI handling code for all exception ids. - * By default, It will just print some information for debug, Vendor can customize it according to its requirements. - */ -static void system_default_exception_handler(unsigned long mcause, unsigned long sp) -{ - /* TODO: Uncomment this if you have implement printf function */ - /*printf("MCAUSE: 0x%lx\r\n", mcause); - printf("MEPC : 0x%lx\r\n", __RV_CSR_READ(CSR_MEPC)); - printf("MTVAL : 0x%lx\r\n", __RV_CSR_READ(CSR_MBADADDR));*/ - while (1); -} - -/** - * \brief Initialize all the default core exception handlers - * \details - * The core exception handler for each exception id will be initialized to \ref system_default_exception_handler. - * \note - * Called in \ref _init function, used to initialize default exception handlers for all exception IDs - */ -static void Exception_Init(void) -{ - for (int i = 0; i < MAX_SYSTEM_EXCEPTION_NUM + 1; i++) { - SystemExceptionHandlers[i] = (unsigned long)system_default_exception_handler; - } -} - -/** - * \brief Register an exception handler for exception code EXCn - * \details - * * For EXCn < \ref MAX_SYSTEM_EXCEPTION_NUM, it will be registered into SystemExceptionHandlers[EXCn-1]. - * * For EXCn == NMI_EXCn, it will be registered into SystemExceptionHandlers[MAX_SYSTEM_EXCEPTION_NUM]. - * \param EXCn See \ref EXCn_Type - * \param exc_handler The exception handler for this exception code EXCn - */ -void Exception_Register_EXC(uint32_t EXCn, unsigned long exc_handler) -{ - if ((EXCn < MAX_SYSTEM_EXCEPTION_NUM) && (EXCn != 0)) { - SystemExceptionHandlers[EXCn] = exc_handler; - } else if (EXCn == NMI_EXCn) { - SystemExceptionHandlers[MAX_SYSTEM_EXCEPTION_NUM] = exc_handler; - } -} - -/** - * \brief Get current exception handler for exception code EXCn - * \details - * * For EXCn < \ref MAX_SYSTEM_EXCEPTION_NUM, it will return SystemExceptionHandlers[EXCn-1]. - * * For EXCn == NMI_EXCn, it will return SystemExceptionHandlers[MAX_SYSTEM_EXCEPTION_NUM]. - * \param EXCn See \ref EXCn_Type - * \return Current exception handler for exception code EXCn, if not found, return 0. - */ -unsigned long Exception_Get_EXC(uint32_t EXCn) -{ - if ((EXCn < MAX_SYSTEM_EXCEPTION_NUM) && (EXCn != 0)) { - return SystemExceptionHandlers[EXCn]; - } else if (EXCn == NMI_EXCn) { - return SystemExceptionHandlers[MAX_SYSTEM_EXCEPTION_NUM]; - } else { - return 0; - } -} - -/** - * \brief Common NMI and Exception handler entry - * \details - * This function provided a command entry for NMI and exception. Silicon Vendor could modify - * this template implementation according to requirement. - * \remarks - * - RISCV provided common entry for all types of exception. This is proposed code template - * for exception entry function, Silicon Vendor could modify the implementation. - * - For the core_exception_handler template, we provided exception register function \ref Exception_Register_EXC - * which can help developer to register your exception handler for specific exception number. - */ -uint32_t core_exception_handler(unsigned long mcause, unsigned long sp) -{ - uint32_t EXCn = (uint32_t)(mcause & 0X00000fff); - EXC_HANDLER exc_handler; - - if ((EXCn < MAX_SYSTEM_EXCEPTION_NUM) && (EXCn > 0)) { - exc_handler = (EXC_HANDLER)SystemExceptionHandlers[EXCn]; - } else if (EXCn == NMI_EXCn) { - exc_handler = (EXC_HANDLER)SystemExceptionHandlers[MAX_SYSTEM_EXCEPTION_NUM]; - } else { - exc_handler = (EXC_HANDLER)system_default_exception_handler; - } - if (exc_handler != NULL) { - exc_handler(mcause, sp); - } - return 0; -} -/** @} */ /* End of Doxygen Group NMSIS_Core_ExceptionAndNMI */ - -/** - * \brief initialize eclic config - * \details - * Eclic need initialize after boot up, Vendor could also change the initialization - * configuration. - */ -void ECLIC_Init(void) -{ - /* TODO: Add your own initialization code here. This function will be called by main */ - ECLIC_SetMth(0); - ECLIC_SetCfgNlbits(__ECLIC_INTCTLBITS); -} - -/** - * \brief Initialize a specific IRQ and register the handler - * \details - * This function set vector mode, trigger mode and polarity, interrupt level and priority, - * assign handler for specific IRQn. - * \param [in] IRQn NMI interrupt handler address - * \param [in] shv \ref ECLIC_NON_VECTOR_INTERRUPT means non-vector mode, and \ref ECLIC_VECTOR_INTERRUPT is vector mode - * \param [in] trig_mode see \ref ECLIC_TRIGGER_Type - * \param [in] lvl interupt level - * \param [in] priority interrupt priority - * \param [in] handler interrupt handler, if NULL, handler will not be installed - * \return -1 means invalid input parameter. 0 means successful. - * \remarks - * - This function use to configure specific eclic interrupt and register its interrupt handler and enable its interrupt. - * - If the vector table is placed in read-only section(FLASHXIP mode), handler could not be installed - */ -int32_t ECLIC_Register_IRQ(IRQn_Type IRQn, uint8_t shv, ECLIC_TRIGGER_Type trig_mode, uint8_t lvl, uint8_t priority, void* handler) -{ - if ((IRQn > SOC_INT_MAX) || (shv > ECLIC_VECTOR_INTERRUPT) \ - || (trig_mode > ECLIC_NEGTIVE_EDGE_TRIGGER)) { - return -1; - } - - /* set interrupt vector mode */ - ECLIC_SetShvIRQ(IRQn, shv); - /* set interrupt trigger mode and polarity */ - ECLIC_SetTrigIRQ(IRQn, trig_mode); - /* set interrupt level */ - ECLIC_SetLevelIRQ(IRQn, lvl); - /* set interrupt priority */ - ECLIC_SetPriorityIRQ(IRQn, priority); - if (handler != NULL) { - /* set interrupt handler entry to vector table */ - ECLIC_SetVector(IRQn, (rv_csr_t)handler); - } - /* enable interrupt */ - ECLIC_EnableIRQ(IRQn); - return 0; -} -/** @} */ /* End of Doxygen Group NMSIS_Core_ExceptionAndNMI */ - -/** - * \brief early init function before main - * \details - * This function is executed right before main function. - * For RISC-V gnu toolchain, _init function might not be called - * by __libc_init_array function, so we defined a new function - * to do initialization - */ -void _premain_init(void) -{ - /* Initialize exception default handlers */ - Exception_Init(); - /* ECLIC initialization, mainly MTH and NLBIT */ - ECLIC_Init(); -} - -/** - * \brief finish function after main - * \param [in] status status code return from main - * \details - * This function is executed right after main function. - * For RISC-V gnu toolchain, _fini function might not be called - * by __libc_fini_array function, so we defined a new function - * to do initialization - */ -void _postmain_fini(int status) -{ - /* TODO: Add your own finishing code here, called after main */ -} - -/** - * \brief _init function called in __libc_init_array() - * \details - * This `__libc_init_array()` function is called during startup code, - * user need to implement this function, otherwise when link it will - * error init.c:(.text.__libc_init_array+0x26): undefined reference to `_init' - * \note - * Please use \ref _premain_init function now - */ -void _init(void) -{ - /* Don't put any code here, please use _premain_init now */ -} - -/** - * \brief _fini function called in __libc_fini_array() - * \details - * This `__libc_fini_array()` function is called when exit main. - * user need to implement this function, otherwise when link it will - * error fini.c:(.text.__libc_fini_array+0x28): undefined reference to `_fini' - * \note - * Please use \ref _postmain_fini function now - */ -void _fini(void) -{ - /* Don't put any code here, please use _postmain_fini now */ -} - -/** @} */ /* End of Doxygen Group NMSIS_Core_SystemAndClock */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h deleted file mode 100755 index 4f21b52f..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - - -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "fsl_device_registers.h" - -// required since iMX RT10xx SDK include this file for board size -#define BOARD_FLASH_SIZE (0x1000000U) - -// LED -#define LED_PINMUX IOMUXC_GPIO_11_GPIOMUX_IO11 -#define LED_PORT GPIO1 -#define LED_PIN 11 -#define LED_STATE_ON 0 - -// SW8 button -#define BUTTON_PINMUX IOMUXC_GPIO_SD_05_GPIO2_IO05 -#define BUTTON_PORT GPIO2 -#define BUTTON_PIN 5 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_PORT LPUART1 -#define UART_RX_PINMUX IOMUXC_GPIO_09_LPUART1_RXD -#define UART_TX_PINMUX IOMUXC_GPIO_10_LPUART1_TXD - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/board.mk b/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/board.mk deleted file mode 100755 index 507db7f0..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -DCPU_MIMXRT1011DAE5A -MCU_VARIANT = MIMXRT1011 - -# For flash-jlink target -JLINK_DEVICE = MIMXRT1011DAE5A - -# For flash-pyocd target -PYOCD_TARGET = mimxrt1010 - -# flash using pyocd -flash: flash-pyocd diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.c b/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.c deleted file mode 100755 index cd50a93d..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright 2019 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#include "evkmimxrt1010_flexspi_nor_config.h" - -/* Component ID definition, used by tools. */ -#ifndef FSL_COMPONENT_ID -#define FSL_COMPONENT_ID "platform.drivers.xip_board" -#endif - -/******************************************************************************* - * Code - ******************************************************************************/ -#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) -#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) -__attribute__((section(".boot_hdr.conf"))) -#elif defined(__ICCARM__) -#pragma location = ".boot_hdr.conf" -#endif - -const flexspi_nor_config_t qspiflash_config = { - .memConfig = - { - .tag = FLEXSPI_CFG_BLK_TAG, - .version = FLEXSPI_CFG_BLK_VERSION, - .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 3u, - .csSetupTime = 3u, - .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_100MHz, - .sflashA1Size = 16u * 1024u * 1024u, - .lookupTable = - { - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - }, - }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .blockSize = 256u * 1024u, - .isUniformBlockSize = false, -}; -#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.h deleted file mode 100755 index 4be2760b..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.h +++ /dev/null @@ -1,267 +0,0 @@ -/* - * Copyright 2019 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__ -#define __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__ - -#include <stdint.h> -#include <stdbool.h> -#include "fsl_common.h" - -/*! @name Driver version */ -/*@{*/ -/*! @brief XIP_BOARD driver version 2.0.0. */ -#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) -/*@}*/ - -/* FLEXSPI memory config block related defintions */ -#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian -#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 -#define FLEXSPI_CFG_BLK_SIZE (512) - -/* FLEXSPI Feature related definitions */ -#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 - -/* Lookup table related defintions */ -#define CMD_INDEX_READ 0 -#define CMD_INDEX_READSTATUS 1 -#define CMD_INDEX_WRITEENABLE 2 -#define CMD_INDEX_WRITE 4 - -#define CMD_LUT_SEQ_IDX_READ 0 -#define CMD_LUT_SEQ_IDX_READSTATUS 1 -#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 -#define CMD_LUT_SEQ_IDX_WRITE 9 - -#define CMD_SDR 0x01 -#define CMD_DDR 0x21 -#define RADDR_SDR 0x02 -#define RADDR_DDR 0x22 -#define CADDR_SDR 0x03 -#define CADDR_DDR 0x23 -#define MODE1_SDR 0x04 -#define MODE1_DDR 0x24 -#define MODE2_SDR 0x05 -#define MODE2_DDR 0x25 -#define MODE4_SDR 0x06 -#define MODE4_DDR 0x26 -#define MODE8_SDR 0x07 -#define MODE8_DDR 0x27 -#define WRITE_SDR 0x08 -#define WRITE_DDR 0x28 -#define READ_SDR 0x09 -#define READ_DDR 0x29 -#define LEARN_SDR 0x0A -#define LEARN_DDR 0x2A -#define DATSZ_SDR 0x0B -#define DATSZ_DDR 0x2B -#define DUMMY_SDR 0x0C -#define DUMMY_DDR 0x2C -#define DUMMY_RWDS_SDR 0x0D -#define DUMMY_RWDS_DDR 0x2D -#define JMP_ON_CS 0x1F -#define STOP 0 - -#define FLEXSPI_1PAD 0 -#define FLEXSPI_2PAD 1 -#define FLEXSPI_4PAD 2 -#define FLEXSPI_8PAD 3 - -#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ - (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ - FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - -//!@brief Definitions for FlexSPI Serial Clock Frequency -typedef enum _FlexSpiSerialClockFreq -{ - kFlexSpiSerialClk_30MHz = 1, - kFlexSpiSerialClk_50MHz = 2, - kFlexSpiSerialClk_60MHz = 3, - kFlexSpiSerialClk_75MHz = 4, - kFlexSpiSerialClk_80MHz = 5, - kFlexSpiSerialClk_100MHz = 6, - kFlexSpiSerialClk_120MHz = 7, - kFlexSpiSerialClk_133MHz = 8, -} flexspi_serial_clk_freq_t; - -//!@brief FlexSPI clock configuration type -enum -{ - kFlexSpiClk_SDR, //!< Clock configure for SDR mode - kFlexSpiClk_DDR, //!< Clock configurat for DDR mode -}; - -//!@brief FlexSPI Read Sample Clock Source definition -typedef enum _FlashReadSampleClkSource -{ - kFlexSPIReadSampleClk_LoopbackInternally = 0, - kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, - kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, - kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, -} flexspi_read_sample_clk_t; - -//!@brief Misc feature bit definitions -enum -{ - kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable - kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable - kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable - kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable - kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable - kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable - kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. -}; - -//!@brief Flash Type Definition -enum -{ - kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR - kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND - kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH - kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND - kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs -}; - -//!@brief Flash Pad Definitions -enum -{ - kSerialFlash_1Pad = 1, - kSerialFlash_2Pads = 2, - kSerialFlash_4Pads = 4, - kSerialFlash_8Pads = 8, -}; - -//!@brief FlexSPI LUT Sequence structure -typedef struct _lut_sequence -{ - uint8_t seqNum; //!< Sequence Number, valid number: 1-16 - uint8_t seqId; //!< Sequence Index, valid number: 0-15 - uint16_t reserved; -} flexspi_lut_seq_t; - -//!@brief Flash Configuration Command Type -enum -{ - kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc - kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command - kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode - kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode - kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode - kDeviceConfigCmdType_Reset, //!< Reset device command -}; - -//!@brief FlexSPI Memory Configuration Block -typedef struct _FlexSPIConfig -{ - uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL - uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix - uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use - uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 - uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 - uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 - uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For - //! Serial NAND, need to refer to datasheet - uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable - uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, - //! Generic configuration, etc. - uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for - //! DPI/QPI/OPI switch or reset command - flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt - //! sequence number, [31:16] Reserved - uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration - uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable - uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe - flexspi_lut_seq_t - configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq - uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use - uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands - uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use - uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more - //! details - uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details - uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal - uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot - //! Chapter for more details - uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot - //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH - uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use - uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 - uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 - uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 - uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 - uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value - uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value - uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value - uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value - uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command - uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands - uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns - uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 - uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - - //! busy flag is 0 when flash device is busy - uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences - flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences - uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use -} flexspi_mem_config_t; - -/* */ -#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 -#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 -#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 -#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 -#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 -#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 -#define NOR_CMD_INDEX_DUMMY 6 //!< 6 -#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 - -#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ - CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ - 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ - CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ - 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ - CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block -#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ - 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ - 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk - -/* - * Serial NOR configuration block - */ -typedef struct _flexspi_nor_config -{ - flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI - uint32_t pageSize; //!< Page size of Serial NOR - uint32_t sectorSize; //!< Sector size of Serial NOR - uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command - uint8_t isUniformBlockSize; //!< Sector/Block size is the same - uint8_t reserved0[2]; //!< Reserved for future use - uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 - uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command - uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false - uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution - uint32_t blockSize; //!< Block size - uint32_t reserve2[11]; //!< Reserved for future use -} flexspi_nor_config_t; - -#ifdef __cplusplus -extern "C" { -#endif - -#ifdef __cplusplus -} -#endif -#endif /* __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h deleted file mode 100755 index 932ce7fd..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - - -#ifndef BOARD_H_ -#define BOARD_H_ - -// required since iMX RT10xx SDK include this file for board size -#define BOARD_FLASH_SIZE (0x1000000U) - -// LED -#define LED_PINMUX IOMUXC_GPIO_SD_B1_01_GPIO3_IO21 -#define LED_PORT GPIO3 -#define LED_PIN 21 -#define LED_STATE_ON 0 - -// SW8 button -#define BUTTON_PINMUX IOMUXC_GPIO_EMC_09_GPIO2_IO09 -#define BUTTON_PORT GPIO2 -#define BUTTON_PIN 9 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_PORT LPUART1 -#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_07_LPUART1_RX -#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_06_LPUART1_TX - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/board.mk b/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/board.mk deleted file mode 100755 index 17fd25df..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -DCPU_MIMXRT1015DAF5A -MCU_VARIANT = MIMXRT1015 - -# For flash-jlink target -JLINK_DEVICE = MIMXRT1015DAF5A - -# For flash-pyocd target -PYOCD_TARGET = mimxrt1015 - -# flash using pyocd -flash: flash-pyocd diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.c b/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.c deleted file mode 100755 index a396fe60..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright 2018-2019 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#include "evkmimxrt1015_flexspi_nor_config.h" - -/* Component ID definition, used by tools. */ -#ifndef FSL_COMPONENT_ID -#define FSL_COMPONENT_ID "platform.drivers.xip_board" -#endif - -/******************************************************************************* - * Code - ******************************************************************************/ -#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) -#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) -__attribute__((section(".boot_hdr.conf"))) -#elif defined(__ICCARM__) -#pragma location = ".boot_hdr.conf" -#endif - -const flexspi_nor_config_t qspiflash_config = { - .memConfig = - { - .tag = FLEXSPI_CFG_BLK_TAG, - .version = FLEXSPI_CFG_BLK_VERSION, - .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 3u, - .csSetupTime = 3u, - .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_100MHz, - .sflashA1Size = 16u * 1024u * 1024u, - .lookupTable = - { - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - }, - }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .blockSize = 256u * 1024u, - .isUniformBlockSize = false, -}; -#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.h deleted file mode 100755 index 94af5a11..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.h +++ /dev/null @@ -1,268 +0,0 @@ -/* - * Copyright 2018-2019 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef __EVKMIMXRT1015_FLEXSPI_NOR_CONFIG__ -#define __EVKMIMXRT1015_FLEXSPI_NOR_CONFIG__ - -#include <stdint.h> -#include <stdbool.h> -#include "fsl_common.h" - -/*! @name Driver version */ -/*@{*/ -/*! @brief XIP_BOARD driver version 2.0.0. */ -#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) -/*@}*/ - -/* FLEXSPI memory config block related defintions */ -#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian -#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 -#define FLEXSPI_CFG_BLK_SIZE (512) - -/* FLEXSPI Feature related definitions */ -#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 - -/* Lookup table related defintions */ -#define CMD_INDEX_READ 0 -#define CMD_INDEX_READSTATUS 1 -#define CMD_INDEX_WRITEENABLE 2 -#define CMD_INDEX_WRITE 4 - -#define CMD_LUT_SEQ_IDX_READ 0 -#define CMD_LUT_SEQ_IDX_READSTATUS 1 -#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 -#define CMD_LUT_SEQ_IDX_WRITE 9 - -#define CMD_SDR 0x01 -#define CMD_DDR 0x21 -#define RADDR_SDR 0x02 -#define RADDR_DDR 0x22 -#define CADDR_SDR 0x03 -#define CADDR_DDR 0x23 -#define MODE1_SDR 0x04 -#define MODE1_DDR 0x24 -#define MODE2_SDR 0x05 -#define MODE2_DDR 0x25 -#define MODE4_SDR 0x06 -#define MODE4_DDR 0x26 -#define MODE8_SDR 0x07 -#define MODE8_DDR 0x27 -#define WRITE_SDR 0x08 -#define WRITE_DDR 0x28 -#define READ_SDR 0x09 -#define READ_DDR 0x29 -#define LEARN_SDR 0x0A -#define LEARN_DDR 0x2A -#define DATSZ_SDR 0x0B -#define DATSZ_DDR 0x2B -#define DUMMY_SDR 0x0C -#define DUMMY_DDR 0x2C -#define DUMMY_RWDS_SDR 0x0D -#define DUMMY_RWDS_DDR 0x2D -#define JMP_ON_CS 0x1F -#define STOP 0 - -#define FLEXSPI_1PAD 0 -#define FLEXSPI_2PAD 1 -#define FLEXSPI_4PAD 2 -#define FLEXSPI_8PAD 3 - -#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ - (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ - FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - -//!@brief Definitions for FlexSPI Serial Clock Frequency -typedef enum _FlexSpiSerialClockFreq -{ - kFlexSpiSerialClk_30MHz = 1, - kFlexSpiSerialClk_50MHz = 2, - kFlexSpiSerialClk_60MHz = 3, - kFlexSpiSerialClk_75MHz = 4, - kFlexSpiSerialClk_80MHz = 5, - kFlexSpiSerialClk_100MHz = 6, - kFlexSpiSerialClk_133MHz = 7, - kFlexSpiSerialClk_166MHz = 8, - kFlexSpiSerialClk_200MHz = 9, -} flexspi_serial_clk_freq_t; - -//!@brief FlexSPI clock configuration type -enum -{ - kFlexSpiClk_SDR, //!< Clock configure for SDR mode - kFlexSpiClk_DDR, //!< Clock configurat for DDR mode -}; - -//!@brief FlexSPI Read Sample Clock Source definition -typedef enum _FlashReadSampleClkSource -{ - kFlexSPIReadSampleClk_LoopbackInternally = 0, - kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, - kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, - kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, -} flexspi_read_sample_clk_t; - -//!@brief Misc feature bit definitions -enum -{ - kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable - kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable - kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable - kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable - kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable - kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable - kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. -}; - -//!@brief Flash Type Definition -enum -{ - kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR - kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND - kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH - kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND - kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs -}; - -//!@brief Flash Pad Definitions -enum -{ - kSerialFlash_1Pad = 1, - kSerialFlash_2Pads = 2, - kSerialFlash_4Pads = 4, - kSerialFlash_8Pads = 8, -}; - -//!@brief FlexSPI LUT Sequence structure -typedef struct _lut_sequence -{ - uint8_t seqNum; //!< Sequence Number, valid number: 1-16 - uint8_t seqId; //!< Sequence Index, valid number: 0-15 - uint16_t reserved; -} flexspi_lut_seq_t; - -//!@brief Flash Configuration Command Type -enum -{ - kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc - kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command - kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode - kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode - kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode - kDeviceConfigCmdType_Reset, //!< Reset device command -}; - -//!@brief FlexSPI Memory Configuration Block -typedef struct _FlexSPIConfig -{ - uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL - uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix - uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use - uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 - uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 - uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 - uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For - //! Serial NAND, need to refer to datasheet - uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable - uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, - //! Generic configuration, etc. - uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for - //! DPI/QPI/OPI switch or reset command - flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt - //! sequence number, [31:16] Reserved - uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration - uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable - uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe - flexspi_lut_seq_t - configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq - uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use - uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands - uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use - uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more - //! details - uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details - uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal - uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot - //! Chapter for more details - uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot - //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH - uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use - uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 - uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 - uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 - uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 - uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value - uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value - uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value - uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value - uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command - uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands - uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns - uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 - uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - - //! busy flag is 0 when flash device is busy - uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences - flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences - uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use -} flexspi_mem_config_t; - -/* */ -#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 -#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 -#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 -#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 -#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 -#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 -#define NOR_CMD_INDEX_DUMMY 6 //!< 6 -#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 - -#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ - CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ - 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ - CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ - 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ - CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block -#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ - 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ - 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk - -/* - * Serial NOR configuration block - */ -typedef struct _flexspi_nor_config -{ - flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI - uint32_t pageSize; //!< Page size of Serial NOR - uint32_t sectorSize; //!< Sector size of Serial NOR - uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command - uint8_t isUniformBlockSize; //!< Sector/Block size is the same - uint8_t reserved0[2]; //!< Reserved for future use - uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 - uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command - uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false - uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution - uint32_t blockSize; //!< Block size - uint32_t reserve2[11]; //!< Reserved for future use -} flexspi_nor_config_t; - -#ifdef __cplusplus -extern "C" { -#endif - -#ifdef __cplusplus -} -#endif -#endif /* __EVKMIMXRT1015_FLEXSPI_NOR_CONFIG__ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h deleted file mode 100755 index 56ed5855..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - - -#ifndef BOARD_H_ -#define BOARD_H_ - -// required since iMX RT10xx SDK include this file for board size -#define BOARD_FLASH_SIZE (0x800000U) - -// LED -#define LED_PINMUX IOMUXC_GPIO_AD_B0_05_GPIO1_IO05 -#define LED_PORT GPIO1 -#define LED_PIN 5 -#define LED_STATE_ON 0 - -// SW8 button -#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00 -#define BUTTON_PORT GPIO5 -#define BUTTON_PIN 0 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_PORT LPUART1 -#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_07_LPUART1_RX -#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_06_LPUART1_TX - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/board.mk b/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/board.mk deleted file mode 100755 index b15da1b6..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -DCPU_MIMXRT1021DAG5A -MCU_VARIANT = MIMXRT1021 - -# For flash-jlink target -JLINK_DEVICE = MIMXRT1021DAG5A - -# For flash-pyocd target -PYOCD_TARGET = mimxrt1020 - -# flash using pyocd -flash: flash-pyocd diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.c b/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.c deleted file mode 100755 index 6bafe195..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright 2018 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#include "evkmimxrt1020_flexspi_nor_config.h" - -/* Component ID definition, used by tools. */ -#ifndef FSL_COMPONENT_ID -#define FSL_COMPONENT_ID "platform.drivers.xip_board" -#endif - -/******************************************************************************* - * Code - ******************************************************************************/ -#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) -#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) -__attribute__((section(".boot_hdr.conf"))) -#elif defined(__ICCARM__) -#pragma location = ".boot_hdr.conf" -#endif - -const flexspi_nor_config_t qspiflash_config = { - .memConfig = - { - .tag = FLEXSPI_CFG_BLK_TAG, - .version = FLEXSPI_CFG_BLK_VERSION, - .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 3u, - .csSetupTime = 3u, - // Enable DDR mode, Wordaddassable, Safe configuration, Differential clock - .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_100MHz, - .sflashA1Size = 8u * 1024u * 1024u, - .lookupTable = - { - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - }, - }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .blockSize = 256u * 1024u, - .isUniformBlockSize = false, -}; -#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.h deleted file mode 100755 index f5e1aca5..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.h +++ /dev/null @@ -1,268 +0,0 @@ -/* - * Copyright 2018 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef __EVKMIMXRT1020_FLEXSPI_NOR_CONFIG__ -#define __EVKMIMXRT1020_FLEXSPI_NOR_CONFIG__ - -#include <stdint.h> -#include <stdbool.h> -#include "fsl_common.h" - -/*! @name Driver version */ -/*@{*/ -/*! @brief XIP_BOARD driver version 2.0.0. */ -#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) -/*@}*/ - -/* FLEXSPI memory config block related defintions */ -#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian -#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 -#define FLEXSPI_CFG_BLK_SIZE (512) - -/* FLEXSPI Feature related definitions */ -#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 - -/* Lookup table related defintions */ -#define CMD_INDEX_READ 0 -#define CMD_INDEX_READSTATUS 1 -#define CMD_INDEX_WRITEENABLE 2 -#define CMD_INDEX_WRITE 4 - -#define CMD_LUT_SEQ_IDX_READ 0 -#define CMD_LUT_SEQ_IDX_READSTATUS 1 -#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 -#define CMD_LUT_SEQ_IDX_WRITE 9 - -#define CMD_SDR 0x01 -#define CMD_DDR 0x21 -#define RADDR_SDR 0x02 -#define RADDR_DDR 0x22 -#define CADDR_SDR 0x03 -#define CADDR_DDR 0x23 -#define MODE1_SDR 0x04 -#define MODE1_DDR 0x24 -#define MODE2_SDR 0x05 -#define MODE2_DDR 0x25 -#define MODE4_SDR 0x06 -#define MODE4_DDR 0x26 -#define MODE8_SDR 0x07 -#define MODE8_DDR 0x27 -#define WRITE_SDR 0x08 -#define WRITE_DDR 0x28 -#define READ_SDR 0x09 -#define READ_DDR 0x29 -#define LEARN_SDR 0x0A -#define LEARN_DDR 0x2A -#define DATSZ_SDR 0x0B -#define DATSZ_DDR 0x2B -#define DUMMY_SDR 0x0C -#define DUMMY_DDR 0x2C -#define DUMMY_RWDS_SDR 0x0D -#define DUMMY_RWDS_DDR 0x2D -#define JMP_ON_CS 0x1F -#define STOP 0 - -#define FLEXSPI_1PAD 0 -#define FLEXSPI_2PAD 1 -#define FLEXSPI_4PAD 2 -#define FLEXSPI_8PAD 3 - -#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ - (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ - FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - -//!@brief Definitions for FlexSPI Serial Clock Frequency -typedef enum _FlexSpiSerialClockFreq -{ - kFlexSpiSerialClk_30MHz = 1, - kFlexSpiSerialClk_50MHz = 2, - kFlexSpiSerialClk_60MHz = 3, - kFlexSpiSerialClk_75MHz = 4, - kFlexSpiSerialClk_80MHz = 5, - kFlexSpiSerialClk_100MHz = 6, - kFlexSpiSerialClk_133MHz = 7, - kFlexSpiSerialClk_166MHz = 8, - kFlexSpiSerialClk_200MHz = 9, -} flexspi_serial_clk_freq_t; - -//!@brief FlexSPI clock configuration type -enum -{ - kFlexSpiClk_SDR, //!< Clock configure for SDR mode - kFlexSpiClk_DDR, //!< Clock configurat for DDR mode -}; - -//!@brief FlexSPI Read Sample Clock Source definition -typedef enum _FlashReadSampleClkSource -{ - kFlexSPIReadSampleClk_LoopbackInternally = 0, - kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, - kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, - kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, -} flexspi_read_sample_clk_t; - -//!@brief Misc feature bit definitions -enum -{ - kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable - kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable - kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable - kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable - kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable - kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable - kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. -}; - -//!@brief Flash Type Definition -enum -{ - kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR - kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND - kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH - kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND - kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs -}; - -//!@brief Flash Pad Definitions -enum -{ - kSerialFlash_1Pad = 1, - kSerialFlash_2Pads = 2, - kSerialFlash_4Pads = 4, - kSerialFlash_8Pads = 8, -}; - -//!@brief FlexSPI LUT Sequence structure -typedef struct _lut_sequence -{ - uint8_t seqNum; //!< Sequence Number, valid number: 1-16 - uint8_t seqId; //!< Sequence Index, valid number: 0-15 - uint16_t reserved; -} flexspi_lut_seq_t; - -//!@brief Flash Configuration Command Type -enum -{ - kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc - kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command - kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode - kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode - kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode - kDeviceConfigCmdType_Reset, //!< Reset device command -}; - -//!@brief FlexSPI Memory Configuration Block -typedef struct _FlexSPIConfig -{ - uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL - uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix - uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use - uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 - uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 - uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 - uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For - //! Serial NAND, need to refer to datasheet - uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable - uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, - //! Generic configuration, etc. - uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for - //! DPI/QPI/OPI switch or reset command - flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt - //! sequence number, [31:16] Reserved - uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration - uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable - uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe - flexspi_lut_seq_t - configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq - uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use - uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands - uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use - uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more - //! details - uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details - uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal - uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot - //! Chapter for more details - uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot - //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH - uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use - uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 - uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 - uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 - uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 - uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value - uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value - uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value - uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value - uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command - uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands - uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns - uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 - uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - - //! busy flag is 0 when flash device is busy - uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences - flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences - uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use -} flexspi_mem_config_t; - -/* */ -#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 -#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 -#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 -#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 -#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 -#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 -#define NOR_CMD_INDEX_DUMMY 6 //!< 6 -#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 - -#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ - CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ - 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ - CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ - 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ - CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block -#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ - 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ - 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk - -/* - * Serial NOR configuration block - */ -typedef struct _flexspi_nor_config -{ - flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI - uint32_t pageSize; //!< Page size of Serial NOR - uint32_t sectorSize; //!< Sector size of Serial NOR - uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command - uint8_t isUniformBlockSize; //!< Sector/Block size is the same - uint8_t reserved0[2]; //!< Reserved for future use - uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 - uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command - uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false - uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution - uint32_t blockSize; //!< Block size - uint32_t reserve2[11]; //!< Reserved for future use -} flexspi_nor_config_t; - -#ifdef __cplusplus -extern "C" { -#endif - -#ifdef __cplusplus -} -#endif -#endif /* __EVKMIMXRT1020_FLEXSPI_NOR_CONFIG__ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h deleted file mode 100755 index 928fbd72..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - - -#ifndef BOARD_H_ -#define BOARD_H_ - -// required since iMX RT10xx SDK include this file for board size -#define BOARD_FLASH_SIZE (0x4000000U) - -// LED -#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 -#define LED_PORT GPIO1 -#define LED_PIN 9 -#define LED_STATE_ON 0 - -// SW8 button -#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00 -#define BUTTON_PORT GPIO5 -#define BUTTON_PIN 0 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_PORT LPUART1 -#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX -#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.mk b/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.mk deleted file mode 100755 index 9fd22910..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.mk +++ /dev/null @@ -1,8 +0,0 @@ -CFLAGS += -DCPU_MIMXRT1052DVL6B -MCU_VARIANT = MIMXRT1052 - -# For flash-pyocd target -PYOCD_TARGET = mimxrt1050 - -# flash using pyocd -flash: flash-pyocd diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.c b/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.c deleted file mode 100755 index af6eabc8..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.c +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Copyright 2017 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#include "evkbimxrt1050_flexspi_nor_config.h" - -/* Component ID definition, used by tools. */ -#ifndef FSL_COMPONENT_ID -#define FSL_COMPONENT_ID "platform.drivers.xip_board" -#endif - -/******************************************************************************* - * Code - ******************************************************************************/ -#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) -#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) -__attribute__((section(".boot_hdr.conf"))) -#elif defined(__ICCARM__) -#pragma location = ".boot_hdr.conf" -#endif - -const flexspi_nor_config_t hyperflash_config = { - .memConfig = - { - .tag = FLEXSPI_CFG_BLK_TAG, - .version = FLEXSPI_CFG_BLK_VERSION, - .readSampleClkSrc = kFlexSPIReadSampleClk_ExternalInputFromDqsPad, - .csHoldTime = 3u, - .csSetupTime = 3u, - .columnAddressWidth = 3u, - // Enable DDR mode, Wordaddassable, Safe configuration, Differential clock - .controllerMiscOption = - (1u << kFlexSpiMiscOffset_DdrModeEnable) | (1u << kFlexSpiMiscOffset_WordAddressableEnable) | - (1u << kFlexSpiMiscOffset_SafeConfigFreqEnable) | (1u << kFlexSpiMiscOffset_DiffClkEnable), - .sflashPadType = kSerialFlash_8Pads, - .serialClkFreq = kFlexSpiSerialClk_133MHz, - .sflashA1Size = 64u * 1024u * 1024u, - .dataValidTime = {16u, 16u}, - .lookupTable = - { - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_DDR, FLEXSPI_8PAD, 0xA0, RADDR_DDR, FLEXSPI_8PAD, 0x18), - FLEXSPI_LUT_SEQ(CADDR_DDR, FLEXSPI_8PAD, 0x10, DUMMY_DDR, FLEXSPI_8PAD, 0x06), - FLEXSPI_LUT_SEQ(READ_DDR, FLEXSPI_8PAD, 0x04, STOP, FLEXSPI_1PAD, 0x0), - }, - }, - .pageSize = 512u, - .sectorSize = 256u * 1024u, - .blockSize = 256u * 1024u, - .isUniformBlockSize = true, -}; -#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.h deleted file mode 100755 index fe40e7ed..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.h +++ /dev/null @@ -1,269 +0,0 @@ -/* - * Copyright (c) 2016, Freescale Semiconductor, Inc. - * Copyright 2016-2017 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef __EVKBIMXRT1050_FLEXSPI_NOR_CONFIG__ -#define __EVKBIMXRT1050_FLEXSPI_NOR_CONFIG__ - -#include <stdint.h> -#include <stdbool.h> -#include "fsl_common.h" - -/*! @name Driver version */ -/*@{*/ -/*! @brief XIP_BOARD driver version 2.0.0. */ -#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) -/*@}*/ - -/* FLEXSPI memory config block related defintions */ -#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian -#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 -#define FLEXSPI_CFG_BLK_SIZE (512) - -/* FLEXSPI Feature related definitions */ -#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 - -/* Lookup table related defintions */ -#define CMD_INDEX_READ 0 -#define CMD_INDEX_READSTATUS 1 -#define CMD_INDEX_WRITEENABLE 2 -#define CMD_INDEX_WRITE 4 - -#define CMD_LUT_SEQ_IDX_READ 0 -#define CMD_LUT_SEQ_IDX_READSTATUS 1 -#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 -#define CMD_LUT_SEQ_IDX_WRITE 9 - -#define CMD_SDR 0x01 -#define CMD_DDR 0x21 -#define RADDR_SDR 0x02 -#define RADDR_DDR 0x22 -#define CADDR_SDR 0x03 -#define CADDR_DDR 0x23 -#define MODE1_SDR 0x04 -#define MODE1_DDR 0x24 -#define MODE2_SDR 0x05 -#define MODE2_DDR 0x25 -#define MODE4_SDR 0x06 -#define MODE4_DDR 0x26 -#define MODE8_SDR 0x07 -#define MODE8_DDR 0x27 -#define WRITE_SDR 0x08 -#define WRITE_DDR 0x28 -#define READ_SDR 0x09 -#define READ_DDR 0x29 -#define LEARN_SDR 0x0A -#define LEARN_DDR 0x2A -#define DATSZ_SDR 0x0B -#define DATSZ_DDR 0x2B -#define DUMMY_SDR 0x0C -#define DUMMY_DDR 0x2C -#define DUMMY_RWDS_SDR 0x0D -#define DUMMY_RWDS_DDR 0x2D -#define JMP_ON_CS 0x1F -#define STOP 0 - -#define FLEXSPI_1PAD 0 -#define FLEXSPI_2PAD 1 -#define FLEXSPI_4PAD 2 -#define FLEXSPI_8PAD 3 - -#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ - (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ - FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - -//!@brief Definitions for FlexSPI Serial Clock Frequency -typedef enum _FlexSpiSerialClockFreq -{ - kFlexSpiSerialClk_30MHz = 1, - kFlexSpiSerialClk_50MHz = 2, - kFlexSpiSerialClk_60MHz = 3, - kFlexSpiSerialClk_75MHz = 4, - kFlexSpiSerialClk_80MHz = 5, - kFlexSpiSerialClk_100MHz = 6, - kFlexSpiSerialClk_133MHz = 7, - kFlexSpiSerialClk_166MHz = 8, - kFlexSpiSerialClk_200MHz = 9, -} flexspi_serial_clk_freq_t; - -//!@brief FlexSPI clock configuration type -enum -{ - kFlexSpiClk_SDR, //!< Clock configure for SDR mode - kFlexSpiClk_DDR, //!< Clock configurat for DDR mode -}; - -//!@brief FlexSPI Read Sample Clock Source definition -typedef enum _FlashReadSampleClkSource -{ - kFlexSPIReadSampleClk_LoopbackInternally = 0, - kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, - kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, - kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, -} flexspi_read_sample_clk_t; - -//!@brief Misc feature bit definitions -enum -{ - kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable - kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable - kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable - kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable - kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable - kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable - kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. -}; - -//!@brief Flash Type Definition -enum -{ - kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR - kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND - kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH - kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND - kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs -}; - -//!@brief Flash Pad Definitions -enum -{ - kSerialFlash_1Pad = 1, - kSerialFlash_2Pads = 2, - kSerialFlash_4Pads = 4, - kSerialFlash_8Pads = 8, -}; - -//!@brief FlexSPI LUT Sequence structure -typedef struct _lut_sequence -{ - uint8_t seqNum; //!< Sequence Number, valid number: 1-16 - uint8_t seqId; //!< Sequence Index, valid number: 0-15 - uint16_t reserved; -} flexspi_lut_seq_t; - -//!@brief Flash Configuration Command Type -enum -{ - kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc - kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command - kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode - kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode - kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode - kDeviceConfigCmdType_Reset, //!< Reset device command -}; - -//!@brief FlexSPI Memory Configuration Block -typedef struct _FlexSPIConfig -{ - uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL - uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix - uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use - uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 - uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 - uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 - uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For - //! Serial NAND, need to refer to datasheet - uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable - uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, - //! Generic configuration, etc. - uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for - //! DPI/QPI/OPI switch or reset command - flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt - //! sequence number, [31:16] Reserved - uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration - uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable - uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe - flexspi_lut_seq_t - configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq - uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use - uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands - uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use - uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more - //! details - uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details - uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal - uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot - //! Chapter for more details - uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot - //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH - uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use - uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 - uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 - uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 - uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 - uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value - uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value - uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value - uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value - uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command - uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands - uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns - uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 - uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - - //! busy flag is 0 when flash device is busy - uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences - flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences - uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use -} flexspi_mem_config_t; - -/* */ -#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 -#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 -#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 -#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 -#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 -#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 -#define NOR_CMD_INDEX_DUMMY 6 //!< 6 -#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 - -#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ - CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ - 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ - CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ - 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ - CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block -#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ - 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ - 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk - -/* - * Serial NOR configuration block - */ -typedef struct _flexspi_nor_config -{ - flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI - uint32_t pageSize; //!< Page size of Serial NOR - uint32_t sectorSize; //!< Sector size of Serial NOR - uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command - uint8_t isUniformBlockSize; //!< Sector/Block size is the same - uint8_t reserved0[2]; //!< Reserved for future use - uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 - uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command - uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false - uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution - uint32_t blockSize; //!< Block size - uint32_t reserve2[11]; //!< Reserved for future use -} flexspi_nor_config_t; - -#ifdef __cplusplus -extern "C" { -#endif - -#ifdef __cplusplus -} -#endif -#endif /* __EVKBIMXRT1050_FLEXSPI_NOR_CONFIG__ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h deleted file mode 100755 index 7fa37e33..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - - -#ifndef BOARD_H_ -#define BOARD_H_ - -// required since iMX RT10xx SDK include this file for board size -#define BOARD_FLASH_SIZE (0x800000U) - -// LED -#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 -#define LED_PORT GPIO1 -#define LED_PIN 9 -#define LED_STATE_ON 0 - -// SW8 button -#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00 -#define BUTTON_PORT GPIO5 -#define BUTTON_PIN 0 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_PORT LPUART1 -#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX -#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk b/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk deleted file mode 100755 index d0498dbb..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -DCPU_MIMXRT1062DVL6A -MCU_VARIANT = MIMXRT1062 - -# For flash-jlink target -JLINK_DEVICE = MIMXRT1062xxx6A - -# For flash-pyocd target -PYOCD_TARGET = mimxrt1060 - -# flash using pyocd -flash: flash-pyocd diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.c b/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.c deleted file mode 100755 index 5df2b7c1..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright 2018 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#include "evkmimxrt1060_flexspi_nor_config.h" - -/* Component ID definition, used by tools. */ -#ifndef FSL_COMPONENT_ID -#define FSL_COMPONENT_ID "platform.drivers.xip_board" -#endif - -/******************************************************************************* - * Code - ******************************************************************************/ -#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) -#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) -__attribute__((section(".boot_hdr.conf"))) -#elif defined(__ICCARM__) -#pragma location = ".boot_hdr.conf" -#endif - -const flexspi_nor_config_t qspiflash_config = { - .memConfig = - { - .tag = FLEXSPI_CFG_BLK_TAG, - .version = FLEXSPI_CFG_BLK_VERSION, - .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 3u, - .csSetupTime = 3u, - // Enable DDR mode, Wordaddassable, Safe configuration, Differential clock - .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_100MHz, - .sflashA1Size = 8u * 1024u * 1024u, - .lookupTable = - { - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - }, - }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .blockSize = 256u * 1024u, - .isUniformBlockSize = false, -}; -#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.h deleted file mode 100755 index 28d7db57..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.h +++ /dev/null @@ -1,268 +0,0 @@ -/* - * Copyright 2018 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ -#define __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ - -#include <stdint.h> -#include <stdbool.h> -#include "fsl_common.h" - -/*! @name Driver version */ -/*@{*/ -/*! @brief XIP_BOARD driver version 2.0.0. */ -#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) -/*@}*/ - -/* FLEXSPI memory config block related defintions */ -#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian -#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 -#define FLEXSPI_CFG_BLK_SIZE (512) - -/* FLEXSPI Feature related definitions */ -#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 - -/* Lookup table related defintions */ -#define CMD_INDEX_READ 0 -#define CMD_INDEX_READSTATUS 1 -#define CMD_INDEX_WRITEENABLE 2 -#define CMD_INDEX_WRITE 4 - -#define CMD_LUT_SEQ_IDX_READ 0 -#define CMD_LUT_SEQ_IDX_READSTATUS 1 -#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 -#define CMD_LUT_SEQ_IDX_WRITE 9 - -#define CMD_SDR 0x01 -#define CMD_DDR 0x21 -#define RADDR_SDR 0x02 -#define RADDR_DDR 0x22 -#define CADDR_SDR 0x03 -#define CADDR_DDR 0x23 -#define MODE1_SDR 0x04 -#define MODE1_DDR 0x24 -#define MODE2_SDR 0x05 -#define MODE2_DDR 0x25 -#define MODE4_SDR 0x06 -#define MODE4_DDR 0x26 -#define MODE8_SDR 0x07 -#define MODE8_DDR 0x27 -#define WRITE_SDR 0x08 -#define WRITE_DDR 0x28 -#define READ_SDR 0x09 -#define READ_DDR 0x29 -#define LEARN_SDR 0x0A -#define LEARN_DDR 0x2A -#define DATSZ_SDR 0x0B -#define DATSZ_DDR 0x2B -#define DUMMY_SDR 0x0C -#define DUMMY_DDR 0x2C -#define DUMMY_RWDS_SDR 0x0D -#define DUMMY_RWDS_DDR 0x2D -#define JMP_ON_CS 0x1F -#define STOP 0 - -#define FLEXSPI_1PAD 0 -#define FLEXSPI_2PAD 1 -#define FLEXSPI_4PAD 2 -#define FLEXSPI_8PAD 3 - -#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ - (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ - FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - -//!@brief Definitions for FlexSPI Serial Clock Frequency -typedef enum _FlexSpiSerialClockFreq -{ - kFlexSpiSerialClk_30MHz = 1, - kFlexSpiSerialClk_50MHz = 2, - kFlexSpiSerialClk_60MHz = 3, - kFlexSpiSerialClk_75MHz = 4, - kFlexSpiSerialClk_80MHz = 5, - kFlexSpiSerialClk_100MHz = 6, - kFlexSpiSerialClk_120MHz = 7, - kFlexSpiSerialClk_133MHz = 8, - kFlexSpiSerialClk_166MHz = 9, -} flexspi_serial_clk_freq_t; - -//!@brief FlexSPI clock configuration type -enum -{ - kFlexSpiClk_SDR, //!< Clock configure for SDR mode - kFlexSpiClk_DDR, //!< Clock configurat for DDR mode -}; - -//!@brief FlexSPI Read Sample Clock Source definition -typedef enum _FlashReadSampleClkSource -{ - kFlexSPIReadSampleClk_LoopbackInternally = 0, - kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, - kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, - kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, -} flexspi_read_sample_clk_t; - -//!@brief Misc feature bit definitions -enum -{ - kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable - kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable - kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable - kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable - kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable - kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable - kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. -}; - -//!@brief Flash Type Definition -enum -{ - kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR - kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND - kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH - kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND - kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs -}; - -//!@brief Flash Pad Definitions -enum -{ - kSerialFlash_1Pad = 1, - kSerialFlash_2Pads = 2, - kSerialFlash_4Pads = 4, - kSerialFlash_8Pads = 8, -}; - -//!@brief FlexSPI LUT Sequence structure -typedef struct _lut_sequence -{ - uint8_t seqNum; //!< Sequence Number, valid number: 1-16 - uint8_t seqId; //!< Sequence Index, valid number: 0-15 - uint16_t reserved; -} flexspi_lut_seq_t; - -//!@brief Flash Configuration Command Type -enum -{ - kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc - kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command - kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode - kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode - kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode - kDeviceConfigCmdType_Reset, //!< Reset device command -}; - -//!@brief FlexSPI Memory Configuration Block -typedef struct _FlexSPIConfig -{ - uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL - uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix - uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use - uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 - uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 - uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 - uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For - //! Serial NAND, need to refer to datasheet - uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable - uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, - //! Generic configuration, etc. - uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for - //! DPI/QPI/OPI switch or reset command - flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt - //! sequence number, [31:16] Reserved - uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration - uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable - uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe - flexspi_lut_seq_t - configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq - uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use - uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands - uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use - uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more - //! details - uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details - uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal - uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot - //! Chapter for more details - uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot - //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH - uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use - uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 - uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 - uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 - uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 - uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value - uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value - uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value - uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value - uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command - uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands - uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns - uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 - uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - - //! busy flag is 0 when flash device is busy - uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences - flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences - uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use -} flexspi_mem_config_t; - -/* */ -#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 -#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 -#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 -#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 -#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 -#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 -#define NOR_CMD_INDEX_DUMMY 6 //!< 6 -#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 - -#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ - CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ - 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ - CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ - 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ - CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block -#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ - 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ - 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk - -/* - * Serial NOR configuration block - */ -typedef struct _flexspi_nor_config -{ - flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI - uint32_t pageSize; //!< Page size of Serial NOR - uint32_t sectorSize; //!< Sector size of Serial NOR - uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command - uint8_t isUniformBlockSize; //!< Sector/Block size is the same - uint8_t reserved0[2]; //!< Reserved for future use - uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 - uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command - uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false - uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution - uint32_t blockSize; //!< Block size - uint32_t reserve2[11]; //!< Reserved for future use -} flexspi_nor_config_t; - -#ifdef __cplusplus -extern "C" { -#endif - -#ifdef __cplusplus -} -#endif -#endif /* __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h deleted file mode 100755 index 5f51e91a..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - - -#ifndef BOARD_H_ -#define BOARD_H_ - -// required since iMX RT10xx SDK include this file for board size -#define BOARD_FLASH_SIZE (0x400000U) - -// LED -#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 -#define LED_PORT GPIO1 -#define LED_PIN 9 -#define LED_STATE_ON 0 - -// SW8 button -#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00 -#define BUTTON_PORT GPIO5 -#define BUTTON_PIN 0 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_PORT LPUART1 -#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX -#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX - - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk b/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk deleted file mode 100755 index 586d74fe..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -DCPU_MIMXRT1064DVL6A -MCU_VARIANT = MIMXRT1064 - -# For flash-jlink target -JLINK_DEVICE = MIMXRT1064xxx6A - -# For flash-pyocd target -PYOCD_TARGET = mimxrt1064 - -# flash using pyocd -flash: flash-pyocd diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.c b/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.c deleted file mode 100755 index bfb1c2d5..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright 2018 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#include "evkmimxrt1064_flexspi_nor_config.h" - -/* Component ID definition, used by tools. */ -#ifndef FSL_COMPONENT_ID -#define FSL_COMPONENT_ID "platform.drivers.xip_board" -#endif - -/******************************************************************************* - * Code - ******************************************************************************/ -#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) -#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) -__attribute__((section(".boot_hdr.conf"))) -#elif defined(__ICCARM__) -#pragma location = ".boot_hdr.conf" -#endif - -const flexspi_nor_config_t qspiflash_config = { - .memConfig = - { - .tag = FLEXSPI_CFG_BLK_TAG, - .version = FLEXSPI_CFG_BLK_VERSION, - .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 3u, - .csSetupTime = 3u, - // Enable DDR mode, Wordaddassable, Safe configuration, Differential clock - .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_100MHz, - .sflashA1Size = 8u * 1024u * 1024u, - .lookupTable = - { - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - }, - }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .blockSize = 256u * 1024u, - .isUniformBlockSize = false, -}; -#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.h b/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.h deleted file mode 100755 index efdfe583..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.h +++ /dev/null @@ -1,268 +0,0 @@ -/* - * Copyright 2018 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef __EVKMIMXRT1064_FLEXSPI_NOR_CONFIG__ -#define __EVKMIMXRT1064_FLEXSPI_NOR_CONFIG__ - -#include <stdint.h> -#include <stdbool.h> -#include "fsl_common.h" - -/*! @name Driver version */ -/*@{*/ -/*! @brief XIP_BOARD driver version 2.0.0. */ -#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) -/*@}*/ - -/* FLEXSPI memory config block related defintions */ -#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian -#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 -#define FLEXSPI_CFG_BLK_SIZE (512) - -/* FLEXSPI Feature related definitions */ -#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 - -/* Lookup table related defintions */ -#define CMD_INDEX_READ 0 -#define CMD_INDEX_READSTATUS 1 -#define CMD_INDEX_WRITEENABLE 2 -#define CMD_INDEX_WRITE 4 - -#define CMD_LUT_SEQ_IDX_READ 0 -#define CMD_LUT_SEQ_IDX_READSTATUS 1 -#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 -#define CMD_LUT_SEQ_IDX_WRITE 9 - -#define CMD_SDR 0x01 -#define CMD_DDR 0x21 -#define RADDR_SDR 0x02 -#define RADDR_DDR 0x22 -#define CADDR_SDR 0x03 -#define CADDR_DDR 0x23 -#define MODE1_SDR 0x04 -#define MODE1_DDR 0x24 -#define MODE2_SDR 0x05 -#define MODE2_DDR 0x25 -#define MODE4_SDR 0x06 -#define MODE4_DDR 0x26 -#define MODE8_SDR 0x07 -#define MODE8_DDR 0x27 -#define WRITE_SDR 0x08 -#define WRITE_DDR 0x28 -#define READ_SDR 0x09 -#define READ_DDR 0x29 -#define LEARN_SDR 0x0A -#define LEARN_DDR 0x2A -#define DATSZ_SDR 0x0B -#define DATSZ_DDR 0x2B -#define DUMMY_SDR 0x0C -#define DUMMY_DDR 0x2C -#define DUMMY_RWDS_SDR 0x0D -#define DUMMY_RWDS_DDR 0x2D -#define JMP_ON_CS 0x1F -#define STOP 0 - -#define FLEXSPI_1PAD 0 -#define FLEXSPI_2PAD 1 -#define FLEXSPI_4PAD 2 -#define FLEXSPI_8PAD 3 - -#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ - (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ - FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - -//!@brief Definitions for FlexSPI Serial Clock Frequency -typedef enum _FlexSpiSerialClockFreq -{ - kFlexSpiSerialClk_30MHz = 1, - kFlexSpiSerialClk_50MHz = 2, - kFlexSpiSerialClk_60MHz = 3, - kFlexSpiSerialClk_75MHz = 4, - kFlexSpiSerialClk_80MHz = 5, - kFlexSpiSerialClk_100MHz = 6, - kFlexSpiSerialClk_120MHz = 7, - kFlexSpiSerialClk_133MHz = 8, - kFlexSpiSerialClk_166MHz = 9, -} flexspi_serial_clk_freq_t; - -//!@brief FlexSPI clock configuration type -enum -{ - kFlexSpiClk_SDR, //!< Clock configure for SDR mode - kFlexSpiClk_DDR, //!< Clock configurat for DDR mode -}; - -//!@brief FlexSPI Read Sample Clock Source definition -typedef enum _FlashReadSampleClkSource -{ - kFlexSPIReadSampleClk_LoopbackInternally = 0, - kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, - kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, - kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, -} flexspi_read_sample_clk_t; - -//!@brief Misc feature bit definitions -enum -{ - kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable - kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable - kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable - kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable - kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable - kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable - kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. -}; - -//!@brief Flash Type Definition -enum -{ - kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR - kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND - kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH - kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND - kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs -}; - -//!@brief Flash Pad Definitions -enum -{ - kSerialFlash_1Pad = 1, - kSerialFlash_2Pads = 2, - kSerialFlash_4Pads = 4, - kSerialFlash_8Pads = 8, -}; - -//!@brief FlexSPI LUT Sequence structure -typedef struct _lut_sequence -{ - uint8_t seqNum; //!< Sequence Number, valid number: 1-16 - uint8_t seqId; //!< Sequence Index, valid number: 0-15 - uint16_t reserved; -} flexspi_lut_seq_t; - -//!@brief Flash Configuration Command Type -enum -{ - kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc - kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command - kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode - kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode - kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode - kDeviceConfigCmdType_Reset, //!< Reset device command -}; - -//!@brief FlexSPI Memory Configuration Block -typedef struct _FlexSPIConfig -{ - uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL - uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix - uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use - uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 - uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 - uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 - uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For - //! Serial NAND, need to refer to datasheet - uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable - uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, - //! Generic configuration, etc. - uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for - //! DPI/QPI/OPI switch or reset command - flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt - //! sequence number, [31:16] Reserved - uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration - uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable - uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe - flexspi_lut_seq_t - configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq - uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use - uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands - uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use - uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more - //! details - uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details - uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal - uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot - //! Chapter for more details - uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot - //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH - uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use - uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 - uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 - uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 - uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 - uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value - uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value - uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value - uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value - uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command - uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands - uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns - uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 - uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - - //! busy flag is 0 when flash device is busy - uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences - flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences - uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use -} flexspi_mem_config_t; - -/* */ -#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 -#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 -#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 -#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 -#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 -#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 -#define NOR_CMD_INDEX_DUMMY 6 //!< 6 -#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 - -#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ - CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ - 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ - CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ - 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ - CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block -#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ - 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ - 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk - -/* - * Serial NOR configuration block - */ -typedef struct _flexspi_nor_config -{ - flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI - uint32_t pageSize; //!< Page size of Serial NOR - uint32_t sectorSize; //!< Sector size of Serial NOR - uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command - uint8_t isUniformBlockSize; //!< Sector/Block size is the same - uint8_t reserved0[2]; //!< Reserved for future use - uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 - uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command - uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false - uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution - uint32_t blockSize; //!< Block size - uint32_t reserve2[11]; //!< Reserved for future use -} flexspi_nor_config_t; - -#ifdef __cplusplus -extern "C" { -#endif - -#ifdef __cplusplus -} -#endif -#endif /* __EVKMIMXRT1064_FLEXSPI_NOR_CONFIG__ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/teensy_40/board.h b/tinyusb/hw/bsp/imxrt/boards/teensy_40/board.h deleted file mode 100755 index b3cc0a8c..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/teensy_40/board.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - - -#ifndef BOARD_H_ -#define BOARD_H_ - - -// required since iMX RT10xx SDK include this file for board size -#define BOARD_FLASH_SIZE (2 * 1024 * 1024) - -// LED -#define LED_PINMUX IOMUXC_GPIO_B0_03_GPIO2_IO03 // D13 -#define LED_PORT GPIO2 -#define LED_PIN 3 -#define LED_STATE_ON 0 - -// no button -#define BUTTON_PINMUX IOMUXC_GPIO_B0_01_GPIO2_IO01 // D12 -#define BUTTON_PORT GPIO2 -#define BUTTON_PIN 1 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_PORT LPUART6 -#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_03_LPUART6_RX // D0 -#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_02_LPUART6_TX // D1 - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/imxrt/boards/teensy_40/board.mk b/tinyusb/hw/bsp/imxrt/boards/teensy_40/board.mk deleted file mode 100755 index 0ad5ea5c..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/teensy_40/board.mk +++ /dev/null @@ -1,10 +0,0 @@ -CFLAGS += -DCPU_MIMXRT1062DVL6A -MCU_VARIANT = MIMXRT1062 - -# For flash-jlink target -JLINK_DEVICE = MIMXRT1062xxx6A - -# flash by using teensy_loader_cli https://github.com/PaulStoffregen/teensy_loader_cli -# Make sure it is in your PATH -flash: $(BUILD)/$(PROJECT).hex - teensy_loader_cli --mcu=imxrt1062 -v -w $< diff --git a/tinyusb/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.c b/tinyusb/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.c deleted file mode 100755 index 7929906e..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright 2018 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#include <bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.h> - -/* Component ID definition, used by tools. */ -#ifndef FSL_COMPONENT_ID -#define FSL_COMPONENT_ID "platform.drivers.xip_board" -#endif - -/******************************************************************************* - * Code - ******************************************************************************/ -#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) -#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) -__attribute__((section(".boot_hdr.conf"))) -#elif defined(__ICCARM__) -#pragma location = ".boot_hdr.conf" -#endif - -const flexspi_nor_config_t qspiflash_config = { - .memConfig = - { - .tag = FLEXSPI_CFG_BLK_TAG, - .version = FLEXSPI_CFG_BLK_VERSION, - .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 3u, - .csSetupTime = 3u, - // Enable DDR mode, Wordaddassable, Safe configuration, Differential clock - .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_100MHz, - .sflashA1Size = 2u * 1024u * 1024u, - .lookupTable = - { - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - }, - }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .blockSize = 256u * 1024u, - .isUniformBlockSize = false, -}; -#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/tinyusb/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.h b/tinyusb/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.h deleted file mode 100755 index 56068ec6..00000000 --- a/tinyusb/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.h +++ /dev/null @@ -1,268 +0,0 @@ -/* - * Copyright 2018 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef __TEENSY40_FLEXSPI_NOR_CONFIG__ -#define __TEENSY40_FLEXSPI_NOR_CONFIG__ - -#include <stdint.h> -#include <stdbool.h> -#include "fsl_common.h" - -/*! @name Driver version */ -/*@{*/ -/*! @brief XIP_BOARD driver version 2.0.0. */ -#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) -/*@}*/ - -/* FLEXSPI memory config block related defintions */ -#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian -#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 -#define FLEXSPI_CFG_BLK_SIZE (512) - -/* FLEXSPI Feature related definitions */ -#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 - -/* Lookup table related defintions */ -#define CMD_INDEX_READ 0 -#define CMD_INDEX_READSTATUS 1 -#define CMD_INDEX_WRITEENABLE 2 -#define CMD_INDEX_WRITE 4 - -#define CMD_LUT_SEQ_IDX_READ 0 -#define CMD_LUT_SEQ_IDX_READSTATUS 1 -#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 -#define CMD_LUT_SEQ_IDX_WRITE 9 - -#define CMD_SDR 0x01 -#define CMD_DDR 0x21 -#define RADDR_SDR 0x02 -#define RADDR_DDR 0x22 -#define CADDR_SDR 0x03 -#define CADDR_DDR 0x23 -#define MODE1_SDR 0x04 -#define MODE1_DDR 0x24 -#define MODE2_SDR 0x05 -#define MODE2_DDR 0x25 -#define MODE4_SDR 0x06 -#define MODE4_DDR 0x26 -#define MODE8_SDR 0x07 -#define MODE8_DDR 0x27 -#define WRITE_SDR 0x08 -#define WRITE_DDR 0x28 -#define READ_SDR 0x09 -#define READ_DDR 0x29 -#define LEARN_SDR 0x0A -#define LEARN_DDR 0x2A -#define DATSZ_SDR 0x0B -#define DATSZ_DDR 0x2B -#define DUMMY_SDR 0x0C -#define DUMMY_DDR 0x2C -#define DUMMY_RWDS_SDR 0x0D -#define DUMMY_RWDS_DDR 0x2D -#define JMP_ON_CS 0x1F -#define STOP 0 - -#define FLEXSPI_1PAD 0 -#define FLEXSPI_2PAD 1 -#define FLEXSPI_4PAD 2 -#define FLEXSPI_8PAD 3 - -#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ - (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ - FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - -//!@brief Definitions for FlexSPI Serial Clock Frequency -typedef enum _FlexSpiSerialClockFreq -{ - kFlexSpiSerialClk_30MHz = 1, - kFlexSpiSerialClk_50MHz = 2, - kFlexSpiSerialClk_60MHz = 3, - kFlexSpiSerialClk_75MHz = 4, - kFlexSpiSerialClk_80MHz = 5, - kFlexSpiSerialClk_100MHz = 6, - kFlexSpiSerialClk_120MHz = 7, - kFlexSpiSerialClk_133MHz = 8, - kFlexSpiSerialClk_166MHz = 9, -} flexspi_serial_clk_freq_t; - -//!@brief FlexSPI clock configuration type -enum -{ - kFlexSpiClk_SDR, //!< Clock configure for SDR mode - kFlexSpiClk_DDR, //!< Clock configurat for DDR mode -}; - -//!@brief FlexSPI Read Sample Clock Source definition -typedef enum _FlashReadSampleClkSource -{ - kFlexSPIReadSampleClk_LoopbackInternally = 0, - kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, - kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, - kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, -} flexspi_read_sample_clk_t; - -//!@brief Misc feature bit definitions -enum -{ - kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable - kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable - kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable - kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable - kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable - kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable - kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. -}; - -//!@brief Flash Type Definition -enum -{ - kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR - kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND - kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH - kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND - kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs -}; - -//!@brief Flash Pad Definitions -enum -{ - kSerialFlash_1Pad = 1, - kSerialFlash_2Pads = 2, - kSerialFlash_4Pads = 4, - kSerialFlash_8Pads = 8, -}; - -//!@brief FlexSPI LUT Sequence structure -typedef struct _lut_sequence -{ - uint8_t seqNum; //!< Sequence Number, valid number: 1-16 - uint8_t seqId; //!< Sequence Index, valid number: 0-15 - uint16_t reserved; -} flexspi_lut_seq_t; - -//!@brief Flash Configuration Command Type -enum -{ - kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc - kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command - kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode - kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode - kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode - kDeviceConfigCmdType_Reset, //!< Reset device command -}; - -//!@brief FlexSPI Memory Configuration Block -typedef struct _FlexSPIConfig -{ - uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL - uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix - uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use - uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 - uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 - uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 - uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For - //! Serial NAND, need to refer to datasheet - uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable - uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, - //! Generic configuration, etc. - uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for - //! DPI/QPI/OPI switch or reset command - flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt - //! sequence number, [31:16] Reserved - uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration - uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable - uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe - flexspi_lut_seq_t - configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq - uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use - uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands - uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use - uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more - //! details - uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details - uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal - uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot - //! Chapter for more details - uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot - //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH - uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use - uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 - uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 - uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 - uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 - uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value - uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value - uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value - uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value - uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command - uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands - uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns - uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 - uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - - //! busy flag is 0 when flash device is busy - uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences - flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences - uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use -} flexspi_mem_config_t; - -/* */ -#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 -#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 -#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 -#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 -#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 -#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 -#define NOR_CMD_INDEX_DUMMY 6 //!< 6 -#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 - -#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ - CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ - 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ - CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ - 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ - CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block -#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ - 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ - 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk - -/* - * Serial NOR configuration block - */ -typedef struct _flexspi_nor_config -{ - flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI - uint32_t pageSize; //!< Page size of Serial NOR - uint32_t sectorSize; //!< Sector size of Serial NOR - uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command - uint8_t isUniformBlockSize; //!< Sector/Block size is the same - uint8_t reserved0[2]; //!< Reserved for future use - uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 - uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command - uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false - uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution - uint32_t blockSize; //!< Block size - uint32_t reserve2[11]; //!< Reserved for future use -} flexspi_nor_config_t; - -#ifdef __cplusplus -extern "C" { -#endif - -#ifdef __cplusplus -} -#endif -#endif /* __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ */ diff --git a/tinyusb/hw/bsp/imxrt/family.c b/tinyusb/hw/bsp/imxrt/family.c deleted file mode 100755 index 77a224a5..00000000 --- a/tinyusb/hw/bsp/imxrt/family.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2018, hathach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board.h" -#include "board.h" -#include "fsl_device_registers.h" -#include "fsl_gpio.h" -#include "fsl_iomuxc.h" -#include "fsl_clock.h" -#include "fsl_lpuart.h" - -#include "clock_config.h" - -// needed by fsl_flexspi_nor_boot -const uint8_t dcd_data[] = { 0x00 }; - -void board_init(void) -{ - // Init clock - BOARD_BootClockRUN(); - SystemCoreClockUpdate(); - - // Enable IOCON clock - CLOCK_EnableClock(kCLOCK_Iomuxc); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) -// NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - // LED - IOMUXC_SetPinMux( LED_PINMUX, 0U); - IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U); - - gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode }; - GPIO_PinInit(LED_PORT, LED_PIN, &led_config); - board_led_write(true); - - // Button - IOMUXC_SetPinMux( BUTTON_PINMUX, 0U); - IOMUXC_SetPinConfig(BUTTON_PINMUX, 0x01B0A0U); - gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_IntRisingEdge, }; - GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config); - - // UART - IOMUXC_SetPinMux( UART_TX_PINMUX, 0U); - IOMUXC_SetPinMux( UART_RX_PINMUX, 0U); - IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u); - IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u); - - lpuart_config_t uart_config; - LPUART_GetDefaultConfig(&uart_config); - uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; - uart_config.enableTx = true; - uart_config.enableRx = true; - - uint32_t freq; - if (CLOCK_GetMux(kCLOCK_UartMux) == 0) /* PLL3 div6 80M */ - { - freq = (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U); - } - else - { - freq = CLOCK_GetOscFreq() / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U); - } - - LPUART_Init(UART_PORT, &uart_config, freq); - - //------------- USB0 -------------// - - // Clock - CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U); - CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U); - - // USB1 -// CLOCK_EnableUsbhs1PhyPllClock(kCLOCK_Usbphy480M, 480000000U); -// CLOCK_EnableUsbhs1Clock(kCLOCK_Usb480M, 480000000U); - - USBPHY_Type* usb_phy; - - // RT105x RT106x have dual USB controller. TODO support USB2 -#ifdef USBPHY1 - usb_phy = USBPHY1; -#else - usb_phy = USBPHY; -#endif - - // Enable PHY support for Low speed device + LS via FS Hub - usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK; - - // Enable all power for normal operation - usb_phy->PWD = 0; - - // TX Timing - uint32_t phytx = usb_phy->TX; - phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK); - phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06); - usb_phy->TX = phytx; -} - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USB_OTG1_IRQHandler(void) -{ - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST - tuh_int_handler(0); - #endif - - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - tud_int_handler(0); - #endif -} - -void USB_OTG2_IRQHandler(void) -{ - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST - tuh_int_handler(1); - #endif - - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE - tud_int_handler(1); - #endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - // active low - return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - LPUART_ReadBlocking(UART_PORT, buf, len); - return len; -} - -int board_uart_write(void const * buf, int len) -{ - LPUART_WriteBlocking(UART_PORT, (uint8_t*)buf, len); - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/tinyusb/hw/bsp/imxrt/family.mk b/tinyusb/hw/bsp/imxrt/family.mk deleted file mode 100755 index a919d369..00000000 --- a/tinyusb/hw/bsp/imxrt/family.mk +++ /dev/null @@ -1,54 +0,0 @@ -UF2_FAMILY_ID = 0x4fb2d5bd -SDK_DIR = hw/mcu/nxp/mcux-sdk -DEPS_SUBMODULES += $(SDK_DIR) - -include $(TOP)/$(BOARD_PATH)/board.mk - -CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m7 \ - -mfloat-abi=hard \ - -mfpu=fpv5-d16 \ - -D__ARMVFP__=0 -D__ARMFPV5__=0\ - -DXIP_EXTERNAL_FLASH=1 \ - -DXIP_BOOT_HEADER_ENABLE=1 \ - -DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=implicit-fallthrough= - -MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT) - -# All source paths should be relative to the top level. -LD_FILE = $(MCU_DIR)/gcc/$(MCU_VARIANT)xxxxx_flexspi_nor.ld - -# TODO for net_lwip_webserver exmaple, but may not needed !! -LDFLAGS += \ - -Wl,--defsym,__stack_size__=0x800 \ - -SRC_C += \ - src/portable/nxp/transdimension/dcd_transdimension.c \ - $(MCU_DIR)/system_$(MCU_VARIANT).c \ - $(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \ - $(MCU_DIR)/project_template/clock_config.c \ - $(MCU_DIR)/drivers/fsl_clock.c \ - $(SDK_DIR)/drivers/common/fsl_common.c \ - $(SDK_DIR)/drivers/igpio/fsl_gpio.c \ - $(SDK_DIR)/drivers/lpuart/fsl_lpuart.c - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(MCU_DIR)/../../CMSIS/Include \ - $(TOP)/$(MCU_DIR) \ - $(TOP)/$(MCU_DIR)/project_template \ - $(TOP)/$(MCU_DIR)/drivers \ - $(TOP)/$(SDK_DIR)/drivers/common \ - $(TOP)/$(SDK_DIR)/drivers/igpio \ - $(TOP)/$(SDK_DIR)/drivers/lpuart - -SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_VARIANT).S - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM7/r0p1 - diff --git a/tinyusb/hw/bsp/lpc15/boards/lpcxpresso1549/board.h b/tinyusb/hw/bsp/lpc15/boards/lpcxpresso1549/board.h deleted file mode 100755 index 5ed5b75b..00000000 --- a/tinyusb/hw/bsp/lpc15/boards/lpcxpresso1549/board.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// XTAL -#define XTAL_OscRateIn 12000000 -#define XTAL_RTCOscRateIn 32768 - -// LED -#define LED_PORT 0 -#define LED_PIN 25 - -// Wake Switch -#define BUTTON_PORT 0 -#define BUTTON_PIN 17 - -#define UART_PORT LPC_USART0 - -static inline void board_lpc15_pinmux_swm_init(void) -{ - // Pinmux - const PINMUX_GRP_T pinmuxing[] = - { - {0, 25, (IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // PIO0_25-BREAK_CTRL-RED (low enable) - {0, 13, (IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // PIO0_13-ISP_RX - {0, 18, (IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // PIO0_18-ISP_TX - {1, 11, (IOCON_MODE_PULLDOWN | IOCON_DIGMODE_EN)}, // PIO1_11-ISP_1 (VBUS) - }; - - // Pin Mux - Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - - // SWIM - Chip_SWM_MovablePortPinAssign(SWM_USB_VBUS_I , 1, 11); - Chip_SWM_MovablePortPinAssign(SWM_UART0_RXD_I, 0, 13); - Chip_SWM_MovablePortPinAssign(SWM_UART0_TXD_O, 0, 18); -} - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/tinyusb/hw/bsp/lpc15/boards/lpcxpresso1549/board.mk b/tinyusb/hw/bsp/lpc15/boards/lpcxpresso1549/board.mk deleted file mode 100755 index a3e04cfa..00000000 --- a/tinyusb/hw/bsp/lpc15/boards/lpcxpresso1549/board.mk +++ /dev/null @@ -1,6 +0,0 @@ -LD_FILE = $(BOARD_PATH)/lpc1549.ld - -JLINK_DEVICE = LPC1549 - -# flash using pyocd -flash: flash-jlink diff --git a/tinyusb/hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld b/tinyusb/hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld deleted file mode 100755 index 6dd12ade..00000000 --- a/tinyusb/hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld +++ /dev/null @@ -1,246 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * Copyright (c) 2008-2013 Code Red Technologies Ltd, - * Copyright 2015, 2018-2019 NXP - * (c) NXP Semiconductors 2013-2019 - * Generated linker script file for LPC1549 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v11.0.0 [Build 2516] [2019-06-05] on Oct 3, 2019 2:55:18 PM - */ - - -MEMORY -{ - /* Define each memory region */ - MFlash256 (rx) : ORIGIN = 0x0, LENGTH = 0x40000 /* 256K bytes (alias Flash) */ - Ram0_16 (rwx) : ORIGIN = 0x2000000, LENGTH = 0x4000 /* 16K bytes (alias RAM) */ - Ram1_16 (rwx) : ORIGIN = 0x2004000, LENGTH = 0x4000 /* 16K bytes (alias RAM2) */ - Ram2_4 (rwx) : ORIGIN = 0x2008000, LENGTH = 0x1000 /* 4K bytes (alias RAM3) */ -} - - /* Define a symbol for the top of each memory region */ - __base_MFlash256 = 0x0 ; /* MFlash256 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash256 = 0x0 + 0x40000 ; /* 256K bytes */ - __top_Flash = 0x0 + 0x40000 ; /* 256K bytes */ - __base_Ram0_16 = 0x2000000 ; /* Ram0_16 */ - __base_RAM = 0x2000000 ; /* RAM */ - __top_Ram0_16 = 0x2000000 + 0x4000 ; /* 16K bytes */ - __top_RAM = 0x2000000 + 0x4000 ; /* 16K bytes */ - __base_Ram1_16 = 0x2004000 ; /* Ram1_16 */ - __base_RAM2 = 0x2004000 ; /* RAM2 */ - __top_Ram1_16 = 0x2004000 + 0x4000 ; /* 16K bytes */ - __top_RAM2 = 0x2004000 + 0x4000 ; /* 16K bytes */ - __base_Ram2_4 = 0x2008000 ; /* Ram2_4 */ - __base_RAM3 = 0x2008000 ; /* RAM3 */ - __top_Ram2_4 = 0x2008000 + 0x1000 ; /* 4K bytes */ - __top_RAM3 = 0x2008000 + 0x1000 ; /* 4K bytes */ - -ENTRY(ResetISR) - -SECTIONS -{ - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - LONG(LOADADDR(.data_RAM3)); - LONG( ADDR(.data_RAM3)); - LONG( SIZEOF(.data_RAM3)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - LONG( ADDR(.bss_RAM3)); - LONG( SIZEOF(.bss_RAM3)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlash256 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlash256 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlash256 - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > MFlash256 - __exidx_end = .; - - _etext = .; - - /* DATA section for Ram1_16 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$Ram1_16) - *(.data.$RAM2) - *(.data.$Ram1_16) - *(.data.$RAM2.*) - *(.data.$Ram1_16.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > Ram1_16 AT>MFlash256 - /* DATA section for Ram2_4 */ - - .data_RAM3 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM3 = .) ; - *(.ramfunc.$RAM3) - *(.ramfunc.$Ram2_4) - *(.data.$RAM3) - *(.data.$Ram2_4) - *(.data.$RAM3.*) - *(.data.$Ram2_4.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM3 = .) ; - } > Ram2_4 AT>MFlash256 - /* MAIN DATA SECTION */ - .uninit_RESERVED (NOLOAD) : - { - . = ALIGN(4) ; - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > Ram0_16 - - /* Main DATA section (Ram0_16) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > Ram0_16 AT>MFlash256 - - /* BSS section for Ram1_16 */ - .bss_RAM2 : - { - . = ALIGN(4) ; - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2) - *(.bss.$Ram1_16) - *(.bss.$RAM2.*) - *(.bss.$Ram1_16.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > Ram1_16 - - /* BSS section for Ram2_4 */ - .bss_RAM3 : - { - . = ALIGN(4) ; - PROVIDE(__start_bss_RAM3 = .) ; - *(.bss.$RAM3) - *(.bss.$Ram2_4) - *(.bss.$RAM3.*) - *(.bss.$Ram2_4.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM3 = .) ; - } > Ram2_4 - - /* MAIN BSS SECTION */ - .bss : - { - . = ALIGN(4) ; - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > Ram0_16 - - /* NOINIT section for Ram1_16 */ - .noinit_RAM2 (NOLOAD) : - { - . = ALIGN(4) ; - *(.noinit.$RAM2) - *(.noinit.$Ram1_16) - *(.noinit.$RAM2.*) - *(.noinit.$Ram1_16.*) - . = ALIGN(4) ; - } > Ram1_16 - - /* NOINIT section for Ram2_4 */ - .noinit_RAM3 (NOLOAD) : - { - . = ALIGN(4) ; - *(.noinit.$RAM3) - *(.noinit.$Ram2_4) - *(.noinit.$RAM3.*) - *(.noinit.$Ram2_4.*) - . = ALIGN(4) ; - } > Ram2_4 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): - { - . = ALIGN(4) ; - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > Ram0_16 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_Ram0_16 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/lpc15/family.c b/tinyusb/hw/bsp/lpc15/family.c deleted file mode 100755 index 7f5984a3..00000000 --- a/tinyusb/hw/bsp/lpc15/family.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "bsp/board.h" -#include "board.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -/* System oscillator rate and RTC oscillator rate */ -const uint32_t OscRateIn = XTAL_OscRateIn; -const uint32_t RTCOscRateIn = XTAL_RTCOscRateIn; - -// Invoked by startup code -void SystemInit(void) -{ - Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_SRAM1); - Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_SRAM2); - Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON); - Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_SWM); - Chip_SYSCTL_PeriphReset(RESET_IOCON); - - board_lpc15_pinmux_swm_init(); - - Chip_SetupXtalClocking(); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - Chip_GPIO_Init(LPC_GPIO); - - // LED - Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); - - // UART - Chip_Clock_SetUARTBaseClockRate(Chip_Clock_GetMainClockRate(), false); - Chip_UART_Init(UART_PORT); - Chip_UART_ConfigData(UART_PORT, UART_CFG_DATALEN_8 | UART_CFG_PARITY_NONE | UART_CFG_STOPLEN_1); - Chip_UART_SetBaud(UART_PORT, CFG_BOARD_UART_BAUDRATE); - Chip_UART_Enable(UART_PORT); - Chip_UART_TXEnable(UART_PORT); - - // USB: Setup PLL clock, and power - Chip_USB_Init(); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - // active low - return Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - return Chip_UART_SendBlocking(UART_PORT, buf, len); -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/tinyusb/hw/bsp/lpc15/family.mk b/tinyusb/hw/bsp/lpc15/family.mk deleted file mode 100755 index e80a3bc5..00000000 --- a/tinyusb/hw/bsp/lpc15/family.mk +++ /dev/null @@ -1,39 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -include $(TOP)/$(BOARD_PATH)/board.mk - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m3 \ - -nostdlib \ - -DCORE_M3 \ - -D__USE_LPCOPEN \ - -DCFG_EXAMPLE_MSC_READONLY \ - -DCFG_TUSB_MCU=OPT_MCU_LPC15XX \ - -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' - -# mcu driver cause following warnings -CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=unused-variable - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc15xx/lpc_chip_15xx - -SRC_C += \ - src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc15xx.c \ - $(MCU_DIR)/src/chip_15xx.c \ - $(MCU_DIR)/src/clock_15xx.c \ - $(MCU_DIR)/src/gpio_15xx.c \ - $(MCU_DIR)/src/iocon_15xx.c \ - $(MCU_DIR)/src/swm_15xx.c \ - $(MCU_DIR)/src/sysctl_15xx.c \ - $(MCU_DIR)/src/uart_15xx.c \ - $(MCU_DIR)/src/sysinit_15xx.c - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(MCU_DIR)/inc - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM3 diff --git a/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h b/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h deleted file mode 100755 index b3a7bc44..00000000 --- a/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -// Note: For USB Host demo, install JP4 -// WARNING: don't install JP4 when running as device - -#ifdef __cplusplus - extern "C" { -#endif - -// LED Red -#define LED_PORT 3 -#define LED_PIN 7 - -// ISP Button -#define BUTTON_PORT 0 -#define BUTTON_PIN 7 - -#define UART_DEV LPC_USART0 - -static inline void board_lpc18_pinmux(void) -{ - const PINMUX_GRP_T pinmuxing[] = - { - // LEDs - { 0x6, 9 , SCU_MODE_INBUFF_EN | SCU_MODE_PULLUP | SCU_MODE_FUNC0 }, - { 0x6, 11, SCU_MODE_INBUFF_EN | SCU_MODE_PULLUP | SCU_MODE_FUNC0 }, - - // Button - { 0x2, 7, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC0 }, - - // UART - { 0x06, 4, SCU_MODE_PULLDOWN | SCU_MODE_FUNC2 }, - { 0x02, 1, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC1 }, - - // USB0 - //{ 0x6, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC1 }, // P6_3 USB0_PWR_EN, USB0 VBus function - - //{ 0x9, 5, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC2 }, // P9_5 USB1_VBUS_EN, USB1 VBus function - //{ 0x2, 5, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 }, // P2_5 USB1_VBUS, MUST CONFIGURE THIS SIGNAL FOR USB1 NORMAL OPERATION - {0x2, 5, SCU_MODE_INBUFF_EN | SCU_MODE_PULLUP | SCU_MODE_FUNC4 }, - }; - - Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); -} - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.mk b/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.mk deleted file mode 100755 index 29b12913..00000000 --- a/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/board.mk +++ /dev/null @@ -1,6 +0,0 @@ -LD_FILE = $(BOARD_PATH)/lpc1837.ld - -# For flash-jlink target -JLINK_DEVICE = LPC18S37 - -flash: flash-jlink diff --git a/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld b/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld deleted file mode 100755 index 51fd1539..00000000 --- a/tinyusb/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld +++ /dev/null @@ -1,404 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * Copyright (c) 2008-2013 Code Red Technologies Ltd, - * Copyright 2015, 2018-2019 NXP - * (c) NXP Semiconductors 2013-2021 - * Generated linker script file for LPC1837 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v11.2.0 [Build 4120] [2020-07-09] on Mar 3, 2021 4:22:49 PM - */ - -MEMORY -{ - /* Define each memory region */ - MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ - RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ - RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ - RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ -} - -/* Define a symbol for the top of each memory region */ -__base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ -__base_Flash = 0x1a000000 ; /* Flash */ -__top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ -__top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ -__base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ -__base_Flash2 = 0x1b000000 ; /* Flash2 */ -__top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ -__top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ -__base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ -__base_RAM = 0x10000000 ; /* RAM */ -__top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ -__top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ -__base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ -__base_RAM2 = 0x10080000 ; /* RAM2 */ -__top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ -__top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ -__base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ -__base_RAM3 = 0x20000000 ; /* RAM3 */ -__top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ -__top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ -__base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ -__base_RAM4 = 0x20008000 ; /* RAM4 */ -__top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ -__top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ -__base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ -__base_RAM5 = 0x2000c000 ; /* RAM5 */ -__top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ -__top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - -ENTRY(ResetISR) - -SECTIONS -{ - .text_Flash2 : ALIGN(4) - { - FILL(0xff) - *(.text_Flash2) /* for compatibility with previous releases */ - *(.text_MFlashB512) /* for compatibility with previous releases */ - *(.text.$Flash2) - *(.text.$MFlashB512) - *(.text_Flash2.*) /* for compatibility with previous releases */ - *(.text_MFlashB512.*) /* for compatibility with previous releases */ - *(.text.$Flash2.*) - *(.text.$MFlashB512.*) - *(.rodata.$Flash2) - *(.rodata.$MFlashB512) - *(.rodata.$Flash2.*) - *(.rodata.$MFlashB512.*) } > MFlashB512 - - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - LONG(LOADADDR(.data_RAM3)); - LONG( ADDR(.data_RAM3)); - LONG( SIZEOF(.data_RAM3)); - LONG(LOADADDR(.data_RAM4)); - LONG( ADDR(.data_RAM4)); - LONG( SIZEOF(.data_RAM4)); - LONG(LOADADDR(.data_RAM5)); - LONG( ADDR(.data_RAM5)); - LONG( SIZEOF(.data_RAM5)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - LONG( ADDR(.bss_RAM3)); - LONG( SIZEOF(.bss_RAM3)); - LONG( ADDR(.bss_RAM4)); - LONG( SIZEOF(.bss_RAM4)); - LONG( ADDR(.bss_RAM5)); - LONG( SIZEOF(.bss_RAM5)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlashA512 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlashA512 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlashA512 - - .ARM.exidx : ALIGN(4) - { - __exidx_start = .; - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - __exidx_end = .; - } > MFlashA512 - - _etext = .; - - /* DATA section for RamLoc40 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - PROVIDE(__start_data_RamLoc40 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamLoc40) - *(.data.$RAM2) - *(.data.$RamLoc40) - *(.data.$RAM2.*) - *(.data.$RamLoc40.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - PROVIDE(__end_data_RamLoc40 = .) ; - } > RamLoc40 AT>MFlashA512 - - /* DATA section for RamAHB32 */ - - .data_RAM3 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM3 = .) ; - PROVIDE(__start_data_RamAHB32 = .) ; - *(.ramfunc.$RAM3) - *(.ramfunc.$RamAHB32) - *(.data.$RAM3) - *(.data.$RamAHB32) - *(.data.$RAM3.*) - *(.data.$RamAHB32.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM3 = .) ; - PROVIDE(__end_data_RamAHB32 = .) ; - } > RamAHB32 AT>MFlashA512 - - /* DATA section for RamAHB16 */ - - .data_RAM4 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM4 = .) ; - PROVIDE(__start_data_RamAHB16 = .) ; - *(.ramfunc.$RAM4) - *(.ramfunc.$RamAHB16) - *(.data.$RAM4) - *(.data.$RamAHB16) - *(.data.$RAM4.*) - *(.data.$RamAHB16.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM4 = .) ; - PROVIDE(__end_data_RamAHB16 = .) ; - } > RamAHB16 AT>MFlashA512 - - /* DATA section for RamAHB_ETB16 */ - - .data_RAM5 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM5 = .) ; - PROVIDE(__start_data_RamAHB_ETB16 = .) ; - *(.ramfunc.$RAM5) - *(.ramfunc.$RamAHB_ETB16) - *(.data.$RAM5) - *(.data.$RamAHB_ETB16) - *(.data.$RAM5.*) - *(.data.$RamAHB_ETB16.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM5 = .) ; - PROVIDE(__end_data_RamAHB_ETB16 = .) ; - } > RamAHB_ETB16 AT>MFlashA512 - - /* MAIN DATA SECTION */ - .uninit_RESERVED (NOLOAD) : ALIGN(4) - { - _start_uninit_RESERVED = .; - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc32 AT> RamLoc32 - - /* Main DATA section (RamLoc32) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - PROVIDE(__start_data_RAM = .) ; - PROVIDE(__start_data_RamLoc32 = .) ; - *(vtable) - *(.ramfunc*) - KEEP(*(CodeQuickAccess)) - KEEP(*(DataQuickAccess)) - *(RamFunction) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - PROVIDE(__end_data_RAM = .) ; - PROVIDE(__end_data_RamLoc32 = .) ; - } > RamLoc32 AT>MFlashA512 - - /* BSS section for RamLoc40 */ - .bss_RAM2 : ALIGN(4) - { - PROVIDE(__start_bss_RAM2 = .) ; - PROVIDE(__start_bss_RamLoc40 = .) ; - *(.bss.$RAM2) - *(.bss.$RamLoc40) - *(.bss.$RAM2.*) - *(.bss.$RamLoc40.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - PROVIDE(__end_bss_RamLoc40 = .) ; - } > RamLoc40 AT> RamLoc40 - - /* BSS section for RamAHB32 */ - .bss_RAM3 : ALIGN(4) - { - PROVIDE(__start_bss_RAM3 = .) ; - PROVIDE(__start_bss_RamAHB32 = .) ; - *(.bss.$RAM3) - *(.bss.$RamAHB32) - *(.bss.$RAM3.*) - *(.bss.$RamAHB32.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM3 = .) ; - PROVIDE(__end_bss_RamAHB32 = .) ; - } > RamAHB32 AT> RamAHB32 - - /* BSS section for RamAHB16 */ - .bss_RAM4 : ALIGN(4) - { - PROVIDE(__start_bss_RAM4 = .) ; - PROVIDE(__start_bss_RamAHB16 = .) ; - *(.bss.$RAM4) - *(.bss.$RamAHB16) - *(.bss.$RAM4.*) - *(.bss.$RamAHB16.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM4 = .) ; - PROVIDE(__end_bss_RamAHB16 = .) ; - } > RamAHB16 AT> RamAHB16 - - /* BSS section for RamAHB_ETB16 */ - .bss_RAM5 : ALIGN(4) - { - PROVIDE(__start_bss_RAM5 = .) ; - PROVIDE(__start_bss_RamAHB_ETB16 = .) ; - *(.bss.$RAM5) - *(.bss.$RamAHB_ETB16) - *(.bss.$RAM5.*) - *(.bss.$RamAHB_ETB16.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM5 = .) ; - PROVIDE(__end_bss_RamAHB_ETB16 = .) ; - } > RamAHB_ETB16 AT> RamAHB_ETB16 - - /* MAIN BSS SECTION */ - .bss : ALIGN(4) - { - _bss = .; - PROVIDE(__start_bss_RAM = .) ; - PROVIDE(__start_bss_RamLoc32 = .) ; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(__end_bss_RAM = .) ; - PROVIDE(__end_bss_RamLoc32 = .) ; - PROVIDE(end = .); - } > RamLoc32 AT> RamLoc32 - - /* NOINIT section for RamLoc40 */ - .noinit_RAM2 (NOLOAD) : ALIGN(4) - { - PROVIDE(__start_noinit_RAM2 = .) ; - PROVIDE(__start_noinit_RamLoc40 = .) ; - *(.noinit.$RAM2) - *(.noinit.$RamLoc40) - *(.noinit.$RAM2.*) - *(.noinit.$RamLoc40.*) - . = ALIGN(4) ; - PROVIDE(__end_noinit_RAM2 = .) ; - PROVIDE(__end_noinit_RamLoc40 = .) ; - } > RamLoc40 AT> RamLoc40 - - /* NOINIT section for RamAHB32 */ - .noinit_RAM3 (NOLOAD) : ALIGN(4) - { - PROVIDE(__start_noinit_RAM3 = .) ; - PROVIDE(__start_noinit_RamAHB32 = .) ; - *(.noinit.$RAM3) - *(.noinit.$RamAHB32) - *(.noinit.$RAM3.*) - *(.noinit.$RamAHB32.*) - . = ALIGN(4) ; - PROVIDE(__end_noinit_RAM3 = .) ; - PROVIDE(__end_noinit_RamAHB32 = .) ; - } > RamAHB32 AT> RamAHB32 - - /* NOINIT section for RamAHB16 */ - .noinit_RAM4 (NOLOAD) : ALIGN(4) - { - PROVIDE(__start_noinit_RAM4 = .) ; - PROVIDE(__start_noinit_RamAHB16 = .) ; - *(.noinit.$RAM4) - *(.noinit.$RamAHB16) - *(.noinit.$RAM4.*) - *(.noinit.$RamAHB16.*) - . = ALIGN(4) ; - PROVIDE(__end_noinit_RAM4 = .) ; - PROVIDE(__end_noinit_RamAHB16 = .) ; - } > RamAHB16 AT> RamAHB16 - - /* NOINIT section for RamAHB_ETB16 */ - .noinit_RAM5 (NOLOAD) : ALIGN(4) - { - PROVIDE(__start_noinit_RAM5 = .) ; - PROVIDE(__start_noinit_RamAHB_ETB16 = .) ; - *(.noinit.$RAM5) - *(.noinit.$RamAHB_ETB16) - *(.noinit.$RAM5.*) - *(.noinit.$RamAHB_ETB16.*) - . = ALIGN(4) ; - PROVIDE(__end_noinit_RAM5 = .) ; - PROVIDE(__end_noinit_RamAHB_ETB16 = .) ; - } > RamAHB_ETB16 AT> RamAHB_ETB16 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): ALIGN(4) - { - _noinit = .; - PROVIDE(__start_noinit_RAM = .) ; - PROVIDE(__start_noinit_RamLoc32 = .) ; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - PROVIDE(__end_noinit_RAM = .) ; - PROVIDE(__end_noinit_RamLoc32 = .) ; - } > RamLoc32 AT> RamLoc32 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/lpc18/boards/mcb1800/board.h b/tinyusb/hw/bsp/lpc18/boards/mcb1800/board.h deleted file mode 100755 index 6111da97..00000000 --- a/tinyusb/hw/bsp/lpc18/boards/mcb1800/board.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// PD_10 -#define LED_PORT 6 -#define LED_PIN 24 - -// P4_0 -#define BUTTON_PORT 2 -#define BUTTON_PIN 0 - -#define UART_DEV LPC_USART3 - -static inline void board_lpc18_pinmux(void) -{ - const PINMUX_GRP_T pinmuxing[] = - { - // LEDs - { 0xD, 10, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4) }, - { 0xD, 11, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, - { 0xD, 12, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, - { 0xD, 13, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, - { 0xD, 14, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, - { 0x9, 0, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) }, - { 0x9, 1, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) }, - { 0x9, 2, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) }, - - // Button - { 0x4, 0, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLUP) }, - - // UART - { 2, 3, SCU_MODE_PULLDOWN | SCU_MODE_FUNC2 }, - { 2, 4, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 }, - - // USB0 - { 0x6, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC1 }, // P6_3 USB0_PWR_EN, USB0 VBus function - - { 0x9, 5, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC2 }, // P9_5 USB1_VBUS_EN, USB1 VBus function - { 0x2, 5, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 }, // P2_5 USB1_VBUS, MUST CONFIGURE THIS SIGNAL FOR USB1 NORMAL OPERATION - }; - - Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - - /* Pin clock mux values, re-used structure, value in first index is meaningless */ - const PINMUX_GRP_T pinclockmuxing[] = - { - { 0, 0, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - { 0, 1, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - { 0, 2, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - { 0, 3, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - }; - - /* Clock pins only, group field not used */ - for (uint32_t i = 0; i < (sizeof(pinclockmuxing) / sizeof(pinclockmuxing[0])); i++) - { - Chip_SCU_ClockPinMuxSet(pinclockmuxing[i].pinnum, pinclockmuxing[i].modefunc); - } -} - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/tinyusb/hw/bsp/lpc18/boards/mcb1800/board.mk b/tinyusb/hw/bsp/lpc18/boards/mcb1800/board.mk deleted file mode 100755 index 0307a21d..00000000 --- a/tinyusb/hw/bsp/lpc18/boards/mcb1800/board.mk +++ /dev/null @@ -1,7 +0,0 @@ -LD_FILE = $(BOARD_PATH)/lpc1857.ld - -# For flash-jlink target -JLINK_DEVICE = LPC1857 - -# flash using jlink -flash: flash-jlink diff --git a/tinyusb/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld b/tinyusb/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld deleted file mode 100755 index 9a308e34..00000000 --- a/tinyusb/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld +++ /dev/null @@ -1,323 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * (c) Code Red Technologies Ltd, 2008-2013 - * (c) NXP Semiconductors 2013-2019 - * Generated linker script file for LPC1857 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 15, 2019 1:01:52 PM - */ - -MEMORY -{ - /* Define each memory region */ - MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ - RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ - RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ - RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ -} - -/* Define a symbol for the top of each memory region */ -__base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ -__base_Flash = 0x1a000000 ; /* Flash */ -__top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ -__top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ -__base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ -__base_Flash2 = 0x1b000000 ; /* Flash2 */ -__top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ -__top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ -__base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ -__base_RAM = 0x10000000 ; /* RAM */ -__top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ -__top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ -__base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ -__base_RAM2 = 0x10080000 ; /* RAM2 */ -__top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ -__top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ -__base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ -__base_RAM3 = 0x20000000 ; /* RAM3 */ -__top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ -__top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ -__base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ -__base_RAM4 = 0x20008000 ; /* RAM4 */ -__top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ -__top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ -__base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ -__base_RAM5 = 0x2000c000 ; /* RAM5 */ -__top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ -__top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - -ENTRY(ResetISR) - -SECTIONS -{ - .text_Flash2 : ALIGN(4) - { - FILL(0xff) - *(.text_Flash2*) /* for compatibility with previous releases */ - *(.text_MFlashB512*) /* for compatibility with previous releases */ - *(.text.$Flash2*) - *(.text.$MFlashB512*) - *(.rodata.$Flash2*) - *(.rodata.$MFlashB512*) - } > MFlashB512 - - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - LONG(LOADADDR(.data_RAM3)); - LONG( ADDR(.data_RAM3)); - LONG( SIZEOF(.data_RAM3)); - LONG(LOADADDR(.data_RAM4)); - LONG( ADDR(.data_RAM4)); - LONG( SIZEOF(.data_RAM4)); - LONG(LOADADDR(.data_RAM5)); - LONG( ADDR(.data_RAM5)); - LONG( SIZEOF(.data_RAM5)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - LONG( ADDR(.bss_RAM3)); - LONG( SIZEOF(.bss_RAM3)); - LONG( ADDR(.bss_RAM4)); - LONG( SIZEOF(.bss_RAM4)); - LONG( ADDR(.bss_RAM5)); - LONG( SIZEOF(.bss_RAM5)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlashA512 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlashA512 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlashA512 - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > MFlashA512 - __exidx_end = .; - - _etext = .; - - /* DATA section for RamLoc40 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamLoc40) - *(.data.$RAM2*) - *(.data.$RamLoc40*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > RamLoc40 AT>MFlashA512 - /* DATA section for RamAHB32 */ - - .data_RAM3 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM3 = .) ; - *(.ramfunc.$RAM3) - *(.ramfunc.$RamAHB32) - *(.data.$RAM3*) - *(.data.$RamAHB32*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM3 = .) ; - } > RamAHB32 AT>MFlashA512 - /* DATA section for RamAHB16 */ - - .data_RAM4 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM4 = .) ; - *(.ramfunc.$RAM4) - *(.ramfunc.$RamAHB16) - *(.data.$RAM4*) - *(.data.$RamAHB16*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM4 = .) ; - } > RamAHB16 AT>MFlashA512 - /* DATA section for RamAHB_ETB16 */ - - .data_RAM5 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM5 = .) ; - *(.ramfunc.$RAM5) - *(.ramfunc.$RamAHB_ETB16) - *(.data.$RAM5*) - *(.data.$RamAHB_ETB16*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM5 = .) ; - } > RamAHB_ETB16 AT>MFlashA512 - /* MAIN DATA SECTION */ - .uninit_RESERVED : ALIGN(4) - { - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc32 - - /* Main DATA section (RamLoc32) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > RamLoc32 AT>MFlashA512 - - /* BSS section for RamLoc40 */ - .bss_RAM2 : ALIGN(4) - { - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2*) - *(.bss.$RamLoc40*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > RamLoc40 - - /* BSS section for RamAHB32 */ - .bss_RAM3 : ALIGN(4) - { - PROVIDE(__start_bss_RAM3 = .) ; - *(.bss.$RAM3*) - *(.bss.$RamAHB32*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM3 = .) ; - } > RamAHB32 - - /* BSS section for RamAHB16 */ - .bss_RAM4 : ALIGN(4) - { - PROVIDE(__start_bss_RAM4 = .) ; - *(.bss.$RAM4*) - *(.bss.$RamAHB16*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM4 = .) ; - } > RamAHB16 - - /* BSS section for RamAHB_ETB16 */ - .bss_RAM5 : ALIGN(4) - { - PROVIDE(__start_bss_RAM5 = .) ; - *(.bss.$RAM5*) - *(.bss.$RamAHB_ETB16*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM5 = .) ; - } > RamAHB_ETB16 - - /* MAIN BSS SECTION */ - .bss : ALIGN(4) - { - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > RamLoc32 - - /* NOINIT section for RamLoc40 */ - .noinit_RAM2 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM2*) - *(.noinit.$RamLoc40*) - . = ALIGN(4) ; - } > RamLoc40 - - /* NOINIT section for RamAHB32 */ - .noinit_RAM3 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM3*) - *(.noinit.$RamAHB32*) - . = ALIGN(4) ; - } > RamAHB32 - - /* NOINIT section for RamAHB16 */ - .noinit_RAM4 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM4*) - *(.noinit.$RamAHB16*) - . = ALIGN(4) ; - } > RamAHB16 - - /* NOINIT section for RamAHB_ETB16 */ - .noinit_RAM5 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM5*) - *(.noinit.$RamAHB_ETB16*) - . = ALIGN(4) ; - } > RamAHB_ETB16 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): ALIGN(4) - { - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > RamLoc32 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/lpc18/family.c b/tinyusb/hw/bsp/lpc18/family.c deleted file mode 100755 index d74ebcd3..00000000 --- a/tinyusb/hw/bsp/lpc18/family.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "bsp/board.h" -#include "board.h" - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST - tuh_int_handler(0); - #endif - - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - tud_int_handler(0); - #endif -} - -void USB1_IRQHandler(void) -{ - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST - tuh_int_handler(1); - #endif - - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE - tud_int_handler(1); - #endif -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ - - -/* System configuration variables used by chip driver */ -const uint32_t OscRateIn = 12000000; -const uint32_t ExtRateIn = 0; - -// Invoked by startup code -void SystemInit(void) -{ -#ifdef __USE_LPCOPEN - extern void (* const g_pfnVectors[])(void); - unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; - *pSCB_VTOR = (unsigned int) g_pfnVectors; -#endif - - board_lpc18_pinmux(); - Chip_SetupXtalClocking(); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - Chip_GPIO_Init(LPC_GPIO_PORT); - - // LED - Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, LED_PORT, LED_PIN); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); - - //------------- UART -------------// - Chip_UART_Init(UART_DEV); - Chip_UART_SetBaud(UART_DEV, CFG_BOARD_UART_BAUDRATE); - Chip_UART_ConfigData(UART_DEV, UART_LCR_WLEN8 | UART_LCR_SBS_1BIT | UART_LCR_PARITY_DIS); - Chip_UART_TXEnable(UART_DEV); - - //------------- USB -------------// -#if CFG_TUSB_RHPORT0_MODE - Chip_USB0_Init(); -#endif - -#if CFG_TUSB_RHPORT1_MODE - Chip_USB1_Init(); -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - Chip_GPIO_SetPinState(LPC_GPIO_PORT, LED_PORT, LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - // active low - return Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; -} - -int board_uart_read(uint8_t* buf, int len) -{ - //return UART_ReceiveByte(BOARD_UART_PORT); - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - uint8_t const* buf8 = (uint8_t const*) buf; - for(int i=0; i<len; i++) - { - while ((Chip_UART_ReadLineStatus(UART_DEV) & UART_LSR_THRE) == 0) {} - Chip_UART_SendByte(UART_DEV, buf8[i]); - } - - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/tinyusb/hw/bsp/lpc18/family.mk b/tinyusb/hw/bsp/lpc18/family.mk deleted file mode 100755 index 3fed0b45..00000000 --- a/tinyusb/hw/bsp/lpc18/family.mk +++ /dev/null @@ -1,35 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -include $(TOP)/$(BOARD_PATH)/board.mk - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m3 \ - -nostdlib \ - -DCORE_M3 \ - -D__USE_LPCOPEN \ - -DCFG_TUSB_MCU=OPT_MCU_LPC18XX - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=strict-prototypes - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc18xx/lpc_chip_18xx - -SRC_C += \ - src/portable/nxp/transdimension/dcd_transdimension.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc18xx.c \ - $(MCU_DIR)/src/chip_18xx_43xx.c \ - $(MCU_DIR)/src/clock_18xx_43xx.c \ - $(MCU_DIR)/src/gpio_18xx_43xx.c \ - $(MCU_DIR)/src/sysinit_18xx_43xx.c \ - $(MCU_DIR)/src/uart_18xx_43xx.c - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(MCU_DIR)/inc \ - $(TOP)/$(MCU_DIR)/inc/config_18xx - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM3 diff --git a/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54114/board.h b/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54114/board.h deleted file mode 100755 index b1ad4258..00000000 --- a/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54114/board.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PORT 0 -#define LED_PIN 29 -#define LED_STATE_ON 0 - -// WAKE button -#define BUTTON_PORT 0 -#define BUTTON_PIN 24 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_DEV USART0 -#define UART_RX_PINMUX 0, 0, IOCON_PIO_DIG_FUNC1_EN -#define UART_TX_PINMUX 0, 1, IOCON_PIO_DIG_FUNC1_EN - -// USB0 VBUS -#define USB0_VBUS_PINMUX 1, 6, IOCON_PIO_DIG_FUNC7_EN - -// XTAL -//#define XTAL0_CLK_HZ (16 * 1000 * 1000U) - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54114/board.mk b/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54114/board.mk deleted file mode 100755 index 6e33d8cb..00000000 --- a/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54114/board.mk +++ /dev/null @@ -1,13 +0,0 @@ -MCU_VARIANT = LPC54114 -MCU_CORE = LPC54114_cm4 - -CFLAGS += -DCPU_LPC54114J256BD64_cm4 -LD_FILE = $(MCU_DIR)/gcc/LPC54114J256_cm4_flash.ld - -LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower_cm4_hardabi.a - -JLINK_DEVICE = LPC54114J256_M4 -PYOCD_TARGET = LPC54114 - -# flash using pyocd -flash: flash-pyocd diff --git a/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54628/board.h b/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54628/board.h deleted file mode 100755 index 67027751..00000000 --- a/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54628/board.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PORT 2 -#define LED_PIN 2 -#define LED_STATE_ON 0 - -// WAKE button -#define BUTTON_PORT 1 -#define BUTTON_PIN 1 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_DEV USART0 -#define UART_RX_PINMUX 0, 29, IOCON_PIO_DIG_FUNC1_EN -#define UART_TX_PINMUX 0, 30, IOCON_PIO_DIG_FUNC1_EN - -// USB0 VBUS -#define USB0_VBUS_PINMUX 0, 22, IOCON_PIO_DIG_FUNC7_EN - -// XTAL -//#define XTAL0_CLK_HZ (16 * 1000 * 1000U) - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk b/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk deleted file mode 100755 index 925374cc..00000000 --- a/tinyusb/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk +++ /dev/null @@ -1,18 +0,0 @@ -MCU_VARIANT = LPC54628 -MCU_CORE = LPC54628 - -PORT ?= 0 - -CFLAGS += -DCPU_LPC54628J512ET180 -CFLAGS += -Wno-error=double-promotion - -LD_FILE = $(MCU_DIR)/gcc/LPC54628J512_flash.ld - -LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower_hardabi.a - -JLINK_DEVICE = LPC54628J512 -PYOCD_TARGET = LPC54628 - -#flash: flash-pyocd - -flash: flash-jlink
\ No newline at end of file diff --git a/tinyusb/hw/bsp/lpc54/family.c b/tinyusb/hw/bsp/lpc54/family.c deleted file mode 100755 index 4789425a..00000000 --- a/tinyusb/hw/bsp/lpc54/family.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2018, hathach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "fsl_device_registers.h" -#include "fsl_gpio.h" -#include "fsl_power.h" -#include "fsl_iocon.h" -#include "fsl_usart.h" - -#include "bsp/board.h" -#include "board.h" - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -// IOCON pin mux -#define IOCON_PIO_DIGITAL_EN 0x80u // Enables digital function -#define IOCON_PIO_FUNC0 0x00u -#define IOCON_PIO_FUNC1 0x01u // Selects pin function 1 -#define IOCON_PIO_FUNC7 0x07u // Selects pin function 7 -#define IOCON_PIO_INPFILT_OFF 0x0100u // Input filter disabled -#define IOCON_PIO_INV_DI 0x00u // Input function is not inverted -#define IOCON_PIO_MODE_INACT 0x00u // No addition pin function -#define IOCON_PIO_MODE_PULLUP 0x10u -#define IOCON_PIO_OPENDRAIN_DI 0x00u // Open drain is disabled -#define IOCON_PIO_SLEW_STANDARD 0x00u // Standard mode, output slew rate control is enabled - -// Digital pin function n enabled -#define IOCON_PIO_DIG_FUNC0_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_INPFILT_OFF | IOCON_PIO_FUNC0) -#define IOCON_PIO_DIG_FUNC1_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_INPFILT_OFF | IOCON_PIO_FUNC1) -#define IOCON_PIO_DIG_FUNC4_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_INPFILT_OFF | IOCON_PIO_FUNC4) -#define IOCON_PIO_DIG_FUNC7_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_INPFILT_OFF | IOCON_PIO_FUNC7) - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ - tud_int_handler(0); -} - -void USB1_IRQHandler(void) -{ - tud_int_handler(1); -} - -/**************************************************************** -name: BOARD_BootClockFROHF96M -outputs: -- {id: SYSTICK_clock.outFreq, value: 96 MHz} -- {id: System_clock.outFreq, value: 96 MHz} -settings: -- {id: SYSCON.MAINCLKSELA.sel, value: SYSCON.fro_hf} -sources: -- {id: SYSCON.fro_hf.outFreq, value: 96 MHz} -******************************************************************/ -void BootClockFROHF96M(void) -{ - /*!< Set up the clock sources */ - /*!< Set up FRO */ - POWER_DisablePD(kPDRUNCFG_PD_FRO_EN); /*!< Ensure FRO is on */ - CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change voltage without - accidentally being below the voltage for current speed */ - POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ - CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */ - - CLOCK_SetupFROClocking(96000000U); /*!< Set up high frequency FRO output to selected frequency */ - - /*!< Set up dividers */ - CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ - - /*!< Set up clock selectors - Attach clocks to the peripheries */ - CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */ - - /*!< Set SystemCoreClock variable. */ - SystemCoreClock = 96000000U; -} - -void board_init(void) -{ - // Enable IOCON clock - CLOCK_EnableClock(kCLOCK_Iocon); - - // Init 96 MHz clock - BootClockFROHF96M(); - - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - // Init all GPIO ports 54114 only has 2 ports. - GPIO_PortInit(GPIO, LED_PORT); - GPIO_PortInit(GPIO, BUTTON_PORT); - - // LED - IOCON_PinMuxSet(IOCON, LED_PORT, LED_PIN, IOCON_PIO_DIG_FUNC0_EN); - gpio_pin_config_t const led_config = { kGPIO_DigitalOutput, 0}; - GPIO_PinInit(GPIO, LED_PORT, LED_PIN, &led_config); - - board_led_write(0); - - // Button - IOCON_PinMuxSet(IOCON, BUTTON_PORT, BUTTON_PIN, IOCON_PIO_DIG_FUNC0_EN | IOCON_PIO_MODE_PULLUP); - gpio_pin_config_t const button_config = { kGPIO_DigitalInput, 0}; - GPIO_PinInit(GPIO, BUTTON_PORT, BUTTON_PIN, &button_config); - -#ifdef UART_DEV - // UART - IOCON_PinMuxSet(IOCON, UART_RX_PINMUX); - IOCON_PinMuxSet(IOCON, UART_TX_PINMUX); - - // Enable UART when debug log is on - CLOCK_AttachClk(kFRO12M_to_FLEXCOMM0); - usart_config_t uart_config; - USART_GetDefaultConfig(&uart_config); - uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; - uart_config.enableTx = true; - uart_config.enableRx = true; - USART_Init(UART_DEV, &uart_config, 12000000); -#endif - - // USB - IOCON_PinMuxSet(IOCON, USB0_VBUS_PINMUX); - -#if defined(FSL_FEATURE_SOC_USBHSD_COUNT) && FSL_FEATURE_SOC_USBHSD_COUNT - // LPC546xx and LPC540xx has OTG 1 FS + 1 HS rhports - - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - // Port0 is Full Speed - POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); /*< Turn on USB Phy */ - CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 1, false); - CLOCK_AttachClk(kFRO_HF_to_USB0_CLK); - - /*According to reference mannual, device mode setting has to be set by access usb host register */ - CLOCK_EnableClock(kCLOCK_Usbhsl0); /* enable usb0 host clock */ - USBFSH->PORTMODE |= USBFSH_PORTMODE_DEV_ENABLE_MASK; - CLOCK_DisableClock(kCLOCK_Usbhsl0); /* disable usb0 host clock */ - - CLOCK_EnableUsbfs0DeviceClock(kCLOCK_UsbSrcFro, CLOCK_GetFroHfFreq()); - #endif - - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE - // Port1 is High Speed - POWER_DisablePD(kPDRUNCFG_PD_USB1_PHY); - - /*According to reference mannual, device mode setting has to be set by access usb host register */ - CLOCK_EnableClock(kCLOCK_Usbh1); /* enable usb1 host clock */ - USBHSH->PORTMODE |= USBHSH_PORTMODE_DEV_ENABLE_MASK; - CLOCK_DisableClock(kCLOCK_Usbh1); /* enable usb1 host clock */ - - CLOCK_EnableUsbhs0DeviceClock(kCLOCK_UsbSrcUsbPll, 0U); - #endif - -#else - // LPC5411x series only has full speed device - - POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); // Turn on USB Phy - CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); /* enable USB IP clock */ -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - GPIO_PinWrite(GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - // active low - return BUTTON_STATE_ACTIVE == GPIO_PinRead(GPIO, BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - USART_WriteBlocking(UART_DEV, (uint8_t *)buf, len); - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/tinyusb/hw/bsp/lpc54/family.mk b/tinyusb/hw/bsp/lpc54/family.mk deleted file mode 100755 index 600df6fd..00000000 --- a/tinyusb/hw/bsp/lpc54/family.mk +++ /dev/null @@ -1,54 +0,0 @@ -SDK_DIR = hw/mcu/nxp/mcux-sdk -DEPS_SUBMODULES += $(SDK_DIR) - -include $(TOP)/$(BOARD_PATH)/board.mk - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -DCFG_TUSB_MCU=OPT_MCU_LPC54XXX \ - -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' - -ifeq ($(PORT), 1) - $(info "PORT1 High Speed") - CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED - - # LPC55 Highspeed Port1 can only write to USB_SRAM region - CFLAGS += -DCFG_TUSB_MEM_SECTION='__attribute__((section("m_usb_global")))' -else - $(info "PORT0 Full Speed") -endif - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter - -MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT) - -SRC_C += \ - src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ - $(MCU_DIR)/system_$(MCU_CORE).c \ - $(MCU_DIR)/drivers/fsl_clock.c \ - $(MCU_DIR)/drivers/fsl_power.c \ - $(MCU_DIR)/drivers/fsl_reset.c \ - $(SDK_DIR)/drivers/lpc_gpio/fsl_gpio.c \ - $(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \ - $(SDK_DIR)/drivers/flexcomm/fsl_usart.c - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(MCU_DIR)/../../CMSIS/Include \ - $(TOP)/$(MCU_DIR) \ - $(TOP)/$(MCU_DIR)/drivers \ - $(TOP)/$(SDK_DIR)/drivers/common \ - $(TOP)/$(SDK_DIR)/drivers/flexcomm \ - $(TOP)/$(SDK_DIR)/drivers/lpc_iocon \ - $(TOP)/$(SDK_DIR)/drivers/lpc_gpio - -SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_CORE).S - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM4F diff --git a/tinyusb/hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld b/tinyusb/hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld deleted file mode 100755 index 6b5d852a..00000000 --- a/tinyusb/hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld +++ /dev/null @@ -1,234 +0,0 @@ -/* -** ################################################################### -** Processors: LPC55S69JBD100_cm33_core0 -** LPC55S69JBD64_cm33_core0 -** LPC55S69JEV98_cm33_core0 -** -** Compiler: GNU C Compiler -** Reference manual: LPC55S6x/LPC55S2x/LPC552x User manual(UM11126) Rev.1.3 16 May 2019 -** Version: rev. 1.1, 2019-05-16 -** Build: b191008 -** -** Abstract: -** Linker file for the GNU C Compiler -** -** Copyright 2016 Freescale Semiconductor, Inc. -** Copyright 2016-2019 NXP -** All rights reserved. -** -** SPDX-License-Identifier: BSD-3-Clause -** -** http: www.nxp.com -** mail: support@nxp.com -** -** ################################################################### -*/ - - - -/* Entry Point */ -ENTRY(Reset_Handler) - -HEAP_SIZE = DEFINED(__heap_size__) ? __heap_size__ : 0x0400; -STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x0800; -RPMSG_SHMEM_SIZE = DEFINED(__use_shmem__) ? 0x1800 : 0; - -/* Specify the memory areas */ -MEMORY -{ - m_interrupts (RX) : ORIGIN = 0x00010000, LENGTH = 0x00000200 - m_text (RX) : ORIGIN = 0x00010200, LENGTH = 0x0007FE00 - m_core1_image (RX) : ORIGIN = 0x00090000, LENGTH = 0x00008000 - m_data (RW) : ORIGIN = 0x20000000, LENGTH = 0x00033000 - RPMSG_SHMEM_SIZE - rpmsg_sh_mem (RW) : ORIGIN = 0x20033000 - RPMSG_SHMEM_SIZE, LENGTH = RPMSG_SHMEM_SIZE - m_usb_sram (RW) : ORIGIN = 0x40100000, LENGTH = 0x00004000 -} - -/* Define output sections */ -SECTIONS -{ - /* section for storing the secondary core image */ - .m0code : - { - . = ALIGN(4) ; - KEEP (*(.m0code)) - *(.m0code*) - . = ALIGN(4) ; - } > m_core1_image - - /* NOINIT section for rpmsg_sh_mem */ - .noinit_rpmsg_sh_mem (NOLOAD) : ALIGN(4) - { - __RPMSG_SH_MEM_START__ = .; - *(.noinit.$rpmsg_sh_mem*) - . = ALIGN(4) ; - __RPMSG_SH_MEM_END__ = .; - } > rpmsg_sh_mem - - /* The startup code goes first into internal flash */ - .interrupts : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } > m_interrupts - - /* The program code and other data goes into internal flash */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - KEEP (*(.init)) - KEEP (*(.fini)) - . = ALIGN(4); - } > m_text - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > m_text - - .ARM : - { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } > m_text - - .ctors : - { - __CTOR_LIST__ = .; - /* gcc uses crtbegin.o to find the start of - the constructors, so we make sure it is - first. Because this is a wildcard, it - doesn't matter if the user does not - actually link against crtbegin.o; the - linker won't look for a file to match a - wildcard. The wildcard also means that it - doesn't matter which directory crtbegin.o - is in. */ - KEEP (*crtbegin.o(.ctors)) - KEEP (*crtbegin?.o(.ctors)) - /* We don't want to include the .ctor section from - from the crtend.o file until after the sorted ctors. - The .ctor section from the crtend file contains the - end of ctors marker and it must be last */ - KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*(.ctors)) - __CTOR_END__ = .; - } > m_text - - .dtors : - { - __DTOR_LIST__ = .; - KEEP (*crtbegin.o(.dtors)) - KEEP (*crtbegin?.o(.dtors)) - KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*(.dtors)) - __DTOR_END__ = .; - } > m_text - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } > m_text - - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } > m_text - - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } > m_text - - __etext = .; /* define a global symbol at end of code */ - __DATA_ROM = .; /* Symbol is used by startup for data initialization */ - - .data : AT(__DATA_ROM) - { - . = ALIGN(4); - __DATA_RAM = .; - __data_start__ = .; /* create a global symbol at data start */ - *(.ramfunc*) /* for functions in ram */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - KEEP(*(.jcr*)) - . = ALIGN(4); - __data_end__ = .; /* define a global symbol at data end */ - } > m_data - - __DATA_END = __DATA_ROM + (__data_end__ - __data_start__); - text_end = ORIGIN(m_text) + LENGTH(m_text); - ASSERT(__DATA_END <= text_end, "region m_text overflowed with text and data") - - /* Uninitialized data section */ - .bss : - { - /* This is used by the startup in order to initialize the .bss section */ - . = ALIGN(4); - __START_BSS = .; - __bss_start__ = .; - *(.bss) - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - __END_BSS = .; - } > m_data - - .heap : - { - . = ALIGN(8); - __end__ = .; - PROVIDE(end = .); - __HeapBase = .; - . += HEAP_SIZE; - __HeapLimit = .; - __heap_limit = .; /* Add for _sbrk */ - } > m_data - - .stack : - { - . = ALIGN(8); - . += STACK_SIZE; - } > m_data - - m_usb_bdt (NOLOAD) : - { - . = ALIGN(512); - *(m_usb_bdt) - } > m_usb_sram - - m_usb_global (NOLOAD) : - { - *(m_usb_global) - } > m_usb_sram - - /* Initializes stack on the end of block */ - __StackTop = ORIGIN(m_data) + LENGTH(m_data); - __StackLimit = __StackTop - STACK_SIZE; - PROVIDE(__stack = __StackTop); - - .ARM.attributes 0 : { *(.ARM.attributes) } - - ASSERT(__StackLimit >= __HeapLimit, "region m_data overflowed with stack and heap") -} - diff --git a/tinyusb/hw/bsp/lpc55/boards/double_m33_express/board.h b/tinyusb/hw/bsp/lpc55/boards/double_m33_express/board.h deleted file mode 100755 index 975e74e9..00000000 --- a/tinyusb/hw/bsp/lpc55/boards/double_m33_express/board.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PORT 0 -#define LED_PIN 1 -#define LED_STATE_ON 1 - -// WAKE button -#define BUTTON_PORT 0 -#define BUTTON_PIN 5 -#define BUTTON_STATE_ACTIVE 0 - -// Number of neopixels -#define NEOPIXEL_NUMBER 2 -#define NEOPIXEL_PORT 0 -#define NEOPIXEL_PIN 27 -#define NEOPIXEL_CH 6 -#define NEOPIXEL_TYPE 0 - -// UART -#define UART_DEV USART0 -#define UART_RX_PINMUX 0U, 29U, IOCON_PIO_DIG_FUNC1_EN -#define UART_TX_PINMUX 0U, 30U, IOCON_PIO_DIG_FUNC1_EN - -// XTAL -#define XTAL0_CLK_HZ (16 * 1000 * 1000U) - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/tinyusb/hw/bsp/lpc55/boards/double_m33_express/board.mk b/tinyusb/hw/bsp/lpc55/boards/double_m33_express/board.mk deleted file mode 100755 index d28700ca..00000000 --- a/tinyusb/hw/bsp/lpc55/boards/double_m33_express/board.mk +++ /dev/null @@ -1,12 +0,0 @@ -MCU_VARIANT = LPC55S69 -MCU_CORE = LPC55S69_cm33_core0 -PORT ?= 1 - -CFLAGS += -DCPU_LPC55S69JBD100_cm33_core0 -LD_FILE = $(BOARD_PATH)/LPC55S69_cm33_core0_uf2.ld - -JLINK_DEVICE = LPC55S69 -PYOCD_TARGET = LPC55S69 - -# flash using pyocd -flash: flash-pyocd diff --git a/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s28/board.h b/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s28/board.h deleted file mode 100755 index f85701b0..00000000 --- a/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s28/board.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PORT 1 -#define LED_PIN 6 -#define LED_STATE_ON 0 - -// WAKE button -#define BUTTON_PORT 1 -#define BUTTON_PIN 18 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_DEV USART0 -#define UART_RX_PINMUX 0, 29, IOCON_PIO_DIG_FUNC1_EN -#define UART_TX_PINMUX 0, 30, IOCON_PIO_DIG_FUNC1_EN - -// XTAL -#define XTAL0_CLK_HZ (16 * 1000 * 1000U) - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s28/board.mk b/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s28/board.mk deleted file mode 100755 index ec0828e4..00000000 --- a/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s28/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -MCU_VARIANT = LPC55S28 -MCU_CORE = LPC55S28 -PORT ?= 1 - -CFLAGS += -DCPU_LPC55S28JBD100 - -JLINK_DEVICE = LPC55S28 -PYOCD_TARGET = LPC55S28 - -# flash using pyocd -flash: flash-pyocd diff --git a/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s69/board.h b/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s69/board.h deleted file mode 100755 index f85701b0..00000000 --- a/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s69/board.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PORT 1 -#define LED_PIN 6 -#define LED_STATE_ON 0 - -// WAKE button -#define BUTTON_PORT 1 -#define BUTTON_PIN 18 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_DEV USART0 -#define UART_RX_PINMUX 0, 29, IOCON_PIO_DIG_FUNC1_EN -#define UART_TX_PINMUX 0, 30, IOCON_PIO_DIG_FUNC1_EN - -// XTAL -#define XTAL0_CLK_HZ (16 * 1000 * 1000U) - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s69/board.mk b/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s69/board.mk deleted file mode 100755 index 73edc88a..00000000 --- a/tinyusb/hw/bsp/lpc55/boards/lpcxpresso55s69/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -MCU_VARIANT = LPC55S69 -MCU_CORE = LPC55S69_cm33_core0 -PORT ?= 1 - -CFLAGS += -DCPU_LPC55S69JBD100_cm33_core0 - -JLINK_DEVICE = LPC55S69 -PYOCD_TARGET = LPC55S69 - -# flash using pyocd -flash: flash-pyocd diff --git a/tinyusb/hw/bsp/lpc55/boards/mcu_link/board.h b/tinyusb/hw/bsp/lpc55/boards/mcu_link/board.h deleted file mode 100755 index 5e17cf9f..00000000 --- a/tinyusb/hw/bsp/lpc55/boards/mcu_link/board.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PORT 0 -#define LED_PIN 5 -#define LED_STATE_ON 0 - -// WAKE button (Dummy, use unused pin -#define BUTTON_PORT 0 -#define BUTTON_PIN 30 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_DEV USART0 -#define UART_RX_PINMUX 0, 24, IOCON_PIO_DIG_FUNC1_EN -#define UART_TX_PINMUX 0, 25, IOCON_PIO_DIG_FUNC1_EN - -// XTAL -#define XTAL0_CLK_HZ (16 * 1000 * 1000U) - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/tinyusb/hw/bsp/lpc55/boards/mcu_link/board.mk b/tinyusb/hw/bsp/lpc55/boards/mcu_link/board.mk deleted file mode 100755 index ceb1d0eb..00000000 --- a/tinyusb/hw/bsp/lpc55/boards/mcu_link/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -MCU_VARIANT = LPC55S69 -MCU_CORE = LPC55S69_cm33_core0 -PORT ?= 1 - -CFLAGS += -DCPU_LPC55S69JBD64_cm33_core0 - -JLINK_DEVICE = LPC55S69 -PYOCD_TARGET = LPC55S69 - -# flash using pyocd -flash: flash-pyocd diff --git a/tinyusb/hw/bsp/lpc55/family.c b/tinyusb/hw/bsp/lpc55/family.c deleted file mode 100755 index 4fc1f622..00000000 --- a/tinyusb/hw/bsp/lpc55/family.c +++ /dev/null @@ -1,283 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2018, hathach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board.h" -#include "board.h" -#include "fsl_device_registers.h" -#include "fsl_gpio.h" -#include "fsl_power.h" -#include "fsl_iocon.h" -#include "fsl_usart.h" -#include "fsl_sctimer.h" -#include "sct_neopixel.h" - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -// IOCON pin mux -#define IOCON_PIO_DIGITAL_EN 0x0100u // Enables digital function -#define IOCON_PIO_FUNC0 0x00u // Selects pin function 0 -#define IOCON_PIO_FUNC1 0x01u // Selects pin function 1 -#define IOCON_PIO_FUNC4 0x04u // Selects pin function 4 -#define IOCON_PIO_FUNC7 0x07u // Selects pin function 7 -#define IOCON_PIO_INV_DI 0x00u // Input function is not inverted -#define IOCON_PIO_MODE_INACT 0x00u // No addition pin function -#define IOCON_PIO_OPENDRAIN_DI 0x00u // Open drain is disabled -#define IOCON_PIO_SLEW_STANDARD 0x00u // Standard mode, output slew rate control is enabled - -#define IOCON_PIO_DIG_FUNC0_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC0) // Digital pin function 0 enabled -#define IOCON_PIO_DIG_FUNC1_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC1) // Digital pin function 1 enabled -#define IOCON_PIO_DIG_FUNC4_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC4) // Digital pin function 2 enabled -#define IOCON_PIO_DIG_FUNC7_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC7) // Digital pin function 2 enabled - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ - tud_int_handler(0); -} - -void USB1_IRQHandler(void) -{ - tud_int_handler(1); -} - -/**************************************************************** -name: BOARD_BootClockFROHF96M -outputs: -- {id: SYSTICK_clock.outFreq, value: 96 MHz} -- {id: System_clock.outFreq, value: 96 MHz} -settings: -- {id: SYSCON.MAINCLKSELA.sel, value: SYSCON.fro_hf} -sources: -- {id: SYSCON.fro_hf.outFreq, value: 96 MHz} -******************************************************************/ -void BootClockFROHF96M(void) -{ - /*!< Set up the clock sources */ - /*!< Set up FRO */ - POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ - CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ - CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change voltage without - accidentally being below the voltage for current speed */ - - CLOCK_SetupFROClocking(96000000U); /*!< Set up high frequency FRO output to selected frequency */ - - POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ - CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */ - - /*!< Set up dividers */ - CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ - - /*!< Set up clock selectors - Attach clocks to the peripheries */ - CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */ - - /*!< Set SystemCoreClock variable. */ - SystemCoreClock = 96000000U; -} - -void board_init(void) -{ - // Enable IOCON clock - CLOCK_EnableClock(kCLOCK_Iocon); - - // Init 96 MHz clock - BootClockFROHF96M(); - - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - // Init all GPIO ports - GPIO_PortInit(GPIO, 0); - GPIO_PortInit(GPIO, 1); - - // LED - IOCON_PinMuxSet(IOCON, LED_PORT, LED_PIN, IOCON_PIO_DIG_FUNC0_EN); - gpio_pin_config_t const led_config = { kGPIO_DigitalOutput, 1}; - GPIO_PinInit(GPIO, LED_PORT, LED_PIN, &led_config); - - board_led_write(0); - -#ifdef NEOPIXEL_PIN - // Neopixel - static uint32_t pixelData[NEOPIXEL_NUMBER]; - IOCON_PinMuxSet(IOCON, NEOPIXEL_PORT, NEOPIXEL_PIN, IOCON_PIO_DIG_FUNC4_EN); - - sctpix_init(NEOPIXEL_TYPE); - sctpix_addCh(NEOPIXEL_CH, pixelData, NEOPIXEL_NUMBER); - sctpix_setPixel(NEOPIXEL_CH, 0, 0x100010); - sctpix_setPixel(NEOPIXEL_CH, 1, 0x100010); - sctpix_show(); -#endif - - // Button - IOCON_PinMuxSet(IOCON, BUTTON_PORT, BUTTON_PIN, IOCON_PIO_DIG_FUNC0_EN); - gpio_pin_config_t const button_config = { kGPIO_DigitalInput, 0}; - GPIO_PinInit(GPIO, BUTTON_PORT, BUTTON_PIN, &button_config); - -#ifdef UART_DEV - // UART - IOCON_PinMuxSet(IOCON, UART_RX_PINMUX); - IOCON_PinMuxSet(IOCON, UART_TX_PINMUX); - - // Enable UART when debug log is on - CLOCK_AttachClk(kFRO12M_to_FLEXCOMM0); - usart_config_t uart_config; - USART_GetDefaultConfig(&uart_config); - uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; - uart_config.enableTx = true; - uart_config.enableRx = true; - USART_Init(UART_DEV, &uart_config, 12000000); -#endif - - // USB VBUS - /* PORT0 PIN22 configured as USB0_VBUS */ - IOCON_PinMuxSet(IOCON, 0U, 22U, IOCON_PIO_DIG_FUNC7_EN); - -#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - // Port0 is Full Speed - - /* Turn on USB0 Phy */ - POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); - - /* reset the IP to make sure it's in reset state. */ - RESET_PeripheralReset(kUSB0D_RST_SHIFT_RSTn); - RESET_PeripheralReset(kUSB0HSL_RST_SHIFT_RSTn); - RESET_PeripheralReset(kUSB0HMR_RST_SHIFT_RSTn); - - // Enable USB Clock Adjustments to trim the FRO for the full speed controller - ANACTRL->FRO192M_CTRL |= ANACTRL_FRO192M_CTRL_USBCLKADJ_MASK; - CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 1, false); - CLOCK_AttachClk(kFRO_HF_to_USB0_CLK); - - /*According to reference mannual, device mode setting has to be set by access usb host register */ - CLOCK_EnableClock(kCLOCK_Usbhsl0); // enable usb0 host clock - USBFSH->PORTMODE |= USBFSH_PORTMODE_DEV_ENABLE_MASK; - CLOCK_DisableClock(kCLOCK_Usbhsl0); // disable usb0 host clock - - /* enable USB Device clock */ - CLOCK_EnableUsbfs0DeviceClock(kCLOCK_UsbfsSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); -#endif - -#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE - // Port1 is High Speed - - /* Turn on USB1 Phy */ - POWER_DisablePD(kPDRUNCFG_PD_USB1_PHY); - - /* reset the IP to make sure it's in reset state. */ - RESET_PeripheralReset(kUSB1H_RST_SHIFT_RSTn); - RESET_PeripheralReset(kUSB1D_RST_SHIFT_RSTn); - RESET_PeripheralReset(kUSB1_RST_SHIFT_RSTn); - RESET_PeripheralReset(kUSB1RAM_RST_SHIFT_RSTn); - - /* According to reference mannual, device mode setting has to be set by access usb host register */ - CLOCK_EnableClock(kCLOCK_Usbh1); // enable usb0 host clock - - USBHSH->PORTMODE = USBHSH_PORTMODE_SW_PDCOM_MASK; // Put PHY powerdown under software control - USBHSH->PORTMODE |= USBHSH_PORTMODE_DEV_ENABLE_MASK; - - CLOCK_DisableClock(kCLOCK_Usbh1); // disable usb0 host clock - - /* enable USB Device clock */ - CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_UsbPhySrcExt, XTAL0_CLK_HZ); - CLOCK_EnableUsbhs0DeviceClock(kCLOCK_UsbSrcUnused, 0U); - CLOCK_EnableClock(kCLOCK_UsbRam1); - - // Enable PHY support for Low speed device + LS via FS Hub - USBPHY->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK; - - // Enable all power for normal operation - USBPHY->PWD = 0; - - USBPHY->CTRL_SET = USBPHY_CTRL_SET_ENAUTOCLR_CLKGATE_MASK; - USBPHY->CTRL_SET = USBPHY_CTRL_SET_ENAUTOCLR_PHY_PWD_MASK; - - // TX Timing -// uint32_t phytx = USBPHY->TX; -// phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK); -// phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06); -// USBPHY->TX = phytx; -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - GPIO_PinWrite(GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); - -#ifdef NEOPIXEL_PIN - if (state) { - sctpix_setPixel(NEOPIXEL_CH, 0, 0x100000); - sctpix_setPixel(NEOPIXEL_CH, 1, 0x101010); - } else { - sctpix_setPixel(NEOPIXEL_CH, 0, 0x001000); - sctpix_setPixel(NEOPIXEL_CH, 1, 0x000010); - } - sctpix_show(); -#endif -} - -uint32_t board_button_read(void) -{ - // active low - return BUTTON_STATE_ACTIVE == GPIO_PinRead(GPIO, BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - USART_WriteBlocking(UART_DEV, (uint8_t *)buf, len); - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/tinyusb/hw/bsp/lpc55/family.mk b/tinyusb/hw/bsp/lpc55/family.mk deleted file mode 100755 index 4e8d65ce..00000000 --- a/tinyusb/hw/bsp/lpc55/family.mk +++ /dev/null @@ -1,67 +0,0 @@ -UF2_FAMILY_ID = 0x2abc77ec -SDK_DIR = hw/mcu/nxp/mcux-sdk -DEPS_SUBMODULES += lib/sct_neopixel $(SDK_DIR) - -include $(TOP)/$(BOARD_PATH)/board.mk - -# Default to Highspeed PORT1 -PORT ?= 1 - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m33 \ - -mfloat-abi=hard \ - -mfpu=fpv5-sp-d16 \ - -DCFG_TUSB_MCU=OPT_MCU_LPC55XX \ - -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' \ - -DBOARD_DEVICE_RHPORT_NUM=$(PORT) - -ifeq ($(PORT), 1) - $(info "PORT1 High Speed") - CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED - - # LPC55 Highspeed Port1 can only write to USB_SRAM region - CFLAGS += -DCFG_TUSB_MEM_SECTION='__attribute__((section("m_usb_global")))' -else - $(info "PORT0 Full Speed") -endif - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=float-equal - -MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT) - -# All source paths should be relative to the top level. -LD_FILE ?= $(MCU_DIR)/gcc/$(MCU_CORE)_flash.ld - -SRC_C += \ - src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ - $(MCU_DIR)/system_$(MCU_CORE).c \ - $(MCU_DIR)/drivers/fsl_clock.c \ - $(MCU_DIR)/drivers/fsl_power.c \ - $(MCU_DIR)/drivers/fsl_reset.c \ - $(SDK_DIR)/drivers/lpc_gpio/fsl_gpio.c \ - $(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \ - $(SDK_DIR)/drivers/flexcomm/fsl_usart.c \ - lib/sct_neopixel/sct_neopixel.c - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/lib/sct_neopixel \ - $(TOP)/$(MCU_DIR)/../../CMSIS/Include \ - $(TOP)/$(MCU_DIR) \ - $(TOP)/$(MCU_DIR)/drivers \ - $(TOP)/$(SDK_DIR)/drivers/common \ - $(TOP)/$(SDK_DIR)/drivers/flexcomm \ - $(TOP)/$(SDK_DIR)/drivers/lpc_iocon \ - $(TOP)/$(SDK_DIR)/drivers/lpc_gpio \ - $(TOP)/$(SDK_DIR)/drivers/sctimer - -SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_CORE).S - -LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower_hardabi.a - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM33_NTZ/non_secure diff --git a/tinyusb/hw/bsp/lpcxpresso11u37/board.mk b/tinyusb/hw/bsp/lpcxpresso11u37/board.mk deleted file mode 100755 index 8fcda51e..00000000 --- a/tinyusb/hw/bsp/lpcxpresso11u37/board.mk +++ /dev/null @@ -1,45 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0 \ - -nostdlib \ - -DCORE_M0 \ - -D__USE_LPCOPEN \ - -DCFG_EXAMPLE_MSC_READONLY \ - -DCFG_TUSB_MCU=OPT_MCU_LPC11UXX \ - -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \ - -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' - -# mcu driver cause following warnings -CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc11uxx/lpc_chip_11uxx - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/lpc11u37.ld - -SRC_C += \ - src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc11xx.c \ - $(MCU_DIR)/src/chip_11xx.c \ - $(MCU_DIR)/src/clock_11xx.c \ - $(MCU_DIR)/src/gpio_11xx_1.c \ - $(MCU_DIR)/src/iocon_11xx.c \ - $(MCU_DIR)/src/sysctl_11xx.c \ - $(MCU_DIR)/src/sysinit_11xx.c - -INC += \ - $(TOP)/$(MCU_DIR)/inc - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = LPC11U37/401 - -# flash using pyocd -flash: $(BUILD)/$(PROJECT).hex - pyocd flash -t lpc11u37 $< diff --git a/tinyusb/hw/bsp/lpcxpresso11u37/lpc11u37.ld b/tinyusb/hw/bsp/lpcxpresso11u37/lpc11u37.ld deleted file mode 100755 index 6a2dfb7f..00000000 --- a/tinyusb/hw/bsp/lpcxpresso11u37/lpc11u37.ld +++ /dev/null @@ -1,195 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * Copyright (c) 2008-2013 Code Red Technologies Ltd, - * Copyright 2015, 2018-2019 NXP - * (c) NXP Semiconductors 2013-2019 - * Generated linker script file for LPC11U37/401 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v11.0.0 [Build 2516] [2019-06-05] on Sep 6, 2019 12:16:06 PM - */ - -MEMORY -{ - /* Define each memory region */ - MFlash128 (rx) : ORIGIN = 0x0, LENGTH = 0x20000 /* 128K bytes (alias Flash) */ - RamLoc8 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x2000 /* 8K bytes (alias RAM) */ - RamUsb2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ -} - - /* Define a symbol for the top of each memory region */ - __base_MFlash128 = 0x0 ; /* MFlash128 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash128 = 0x0 + 0x20000 ; /* 128K bytes */ - __top_Flash = 0x0 + 0x20000 ; /* 128K bytes */ - __base_RamLoc8 = 0x10000000 ; /* RamLoc8 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc8 = 0x10000000 + 0x2000 ; /* 8K bytes */ - __top_RAM = 0x10000000 + 0x2000 ; /* 8K bytes */ - __base_RamUsb2 = 0x20004000 ; /* RamUsb2 */ - __base_RAM2 = 0x20004000 ; /* RAM2 */ - __top_RamUsb2 = 0x20004000 + 0x800 ; /* 2K bytes */ - __top_RAM2 = 0x20004000 + 0x800 ; /* 2K bytes */ - - -ENTRY(ResetISR) - -SECTIONS -{ - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlash128 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlash128 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlash128 - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > MFlash128 - __exidx_end = .; - - _etext = .; - - /* DATA section for RamUsb2 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamUsb2) - *(.data.$RAM2) - *(.data.$RamUsb2) - *(.data.$RAM2.*) - *(.data.$RamUsb2.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > RamUsb2 AT>MFlash128 - /* MAIN DATA SECTION */ - .uninit_RESERVED (NOLOAD) : - { - . = ALIGN(4) ; - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc8 - - /* Main DATA section (RamLoc8) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > RamLoc8 AT>MFlash128 - - /* BSS section for RamUsb2 */ - .bss_RAM2 : - { - . = ALIGN(4) ; - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2) - *(.bss.$RamUsb2) - *(.bss.$RAM2.*) - *(.bss.$RamUsb2.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > RamUsb2 - - /* MAIN BSS SECTION */ - .bss : - { - . = ALIGN(4) ; - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > RamLoc8 - - /* NOINIT section for RamUsb2 */ - .noinit_RAM2 (NOLOAD) : - { - . = ALIGN(4) ; - *(.noinit.$RAM2) - *(.noinit.$RamUsb2) - *(.noinit.$RAM2.*) - *(.noinit.$RamUsb2.*) - . = ALIGN(4) ; - } > RamUsb2 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): - { - . = ALIGN(4) ; - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > RamLoc8 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc8 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (( DEFINED(NMI_Handler) ? NMI_Handler : M0_NMI_Handler ) + 1) - + (( DEFINED(HardFault_Handler) ? HardFault_Handler : M0_HardFault_Handler ) + 1) - ) - ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c b/tinyusb/hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c deleted file mode 100755 index 11f1797a..00000000 --- a/tinyusb/hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c +++ /dev/null @@ -1,208 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "../board.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) -{ - tud_int_handler(0); -} - -//---------------------------------------------------------------- ----+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT 1 -#define LED_PIN 24 -#define LED_STATE_ON 0 - -// Wake up Switch -#define BUTTON_PORT 0 -#define BUTTON_PIN 16 -#define BUTTON_STATE_ACTIVE 0 - -/* System oscillator rate and RTC oscillator rate */ -const uint32_t OscRateIn = 12000000; -const uint32_t ExtRateIn = 0; - -/* Pin muxing table, only items that need changing from their default pin - state are in this table. Not every pin is mapped. */ -/* IOCON pin definitions for pin muxing */ -typedef struct { - uint32_t port : 8; /* Pin port */ - uint32_t pin : 8; /* Pin number */ - uint32_t modefunc : 16; /* Function and mode */ -} PINMUX_GRP_T; - -static const PINMUX_GRP_T pinmuxing[] = -{ - {0, 3, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // USB VBUS - {0, 6, (IOCON_FUNC1 | IOCON_MODE_INACT)}, /* PIO0_6 used for USB_CONNECT */ - - {0, 18, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 RX - {0, 19, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 TX -}; - -/* Setup system clocking */ -static void SystemSetupClocking(void) -{ - volatile int i; - - /* Powerup main oscillator */ - Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_SYSOSC_PD); - - /* Wait 200us for OSC to be stablized, no status - indication, dummy wait. */ - for (i = 0; i < 0x100; i++) {} - - /* Set system PLL input to main oscillator */ - Chip_Clock_SetSystemPLLSource(SYSCTL_PLLCLKSRC_MAINOSC); - - /* Power down PLL to change the PLL divider ratio */ - Chip_SYSCTL_PowerDown(SYSCTL_POWERDOWN_SYSPLL_PD); - - /* Setup PLL for main oscillator rate (FCLKIN = 12MHz) * 4 = 48MHz - MSEL = 3 (this is pre-decremented), PSEL = 1 (for P = 2) - FCLKOUT = FCLKIN * (MSEL + 1) = 12MHz * 4 = 48MHz - FCCO = FCLKOUT * 2 * P = 48MHz * 2 * 2 = 192MHz (within FCCO range) */ - Chip_Clock_SetupSystemPLL(3, 1); - - /* Powerup system PLL */ - Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_SYSPLL_PD); - - /* Wait for PLL to lock */ - while (!Chip_Clock_IsSystemPLLLocked()) {} - - /* Set system clock divider to 1 */ - Chip_Clock_SetSysClockDiv(1); - - /* Setup FLASH access to 3 clocks */ - Chip_FMC_SetFLASHAccess(FLASHTIM_50MHZ_CPU); - - /* Set main clock source to the system PLL. This will drive 48MHz - for the main clock and 48MHz for the system clock */ - Chip_Clock_SetMainClockSource(SYSCTL_MAINCLKSRC_PLLOUT); - - /* Set USB PLL input to main oscillator */ - Chip_Clock_SetUSBPLLSource(SYSCTL_PLLCLKSRC_MAINOSC); - /* Setup USB PLL (FCLKIN = 12MHz) * 4 = 48MHz - MSEL = 3 (this is pre-decremented), PSEL = 1 (for P = 2) - FCLKOUT = FCLKIN * (MSEL + 1) = 12MHz * 4 = 48MHz - FCCO = FCLKOUT * 2 * P = 48MHz * 2 * 2 = 192MHz (within FCCO range) */ - Chip_Clock_SetupUSBPLL(3, 1); - - /* Powerup USB PLL */ - Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_USBPLL_PD); - - /* Wait for PLL to lock */ - while (!Chip_Clock_IsUSBPLLLocked()) {} -} - -// Invoked by startup code -void SystemInit(void) -{ - SystemSetupClocking(); - Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_RAM1); - - /* Enable IOCON clock */ - Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON); - for (uint32_t i = 0; i < (sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); i++) - { - Chip_IOCON_PinMuxSet(LPC_IOCON, pinmuxing[i].port, pinmuxing[i].pin, pinmuxing[i].modefunc); - } -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - Chip_GPIO_Init(LPC_GPIO); - - // LED - Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); - - // USB: Setup PLL clock, and power - /* enable USB main clock */ - Chip_Clock_SetUSBClockSource(SYSCTL_USBCLKSRC_PLLOUT, 1); - /* Enable AHB clock to the USB block and USB RAM. */ - Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_USB); - Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_USBRAM); - /* power UP USB Phy */ - Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_USBPAD_PD); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/tinyusb/hw/bsp/lpcxpresso11u68/board.mk b/tinyusb/hw/bsp/lpcxpresso11u68/board.mk deleted file mode 100755 index 922414f8..00000000 --- a/tinyusb/hw/bsp/lpcxpresso11u68/board.mk +++ /dev/null @@ -1,42 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ - -nostdlib \ - -DCORE_M0PLUS \ - -D__VTOR_PRESENT=0 \ - -D__USE_LPCOPEN \ - -DCFG_TUSB_MCU=OPT_MCU_LPC11UXX \ - -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM3")))' \ - -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc11u6x/lpc_chip_11u6x - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/lpc11u68.ld - -SRC_C += \ - src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc11u6x.c \ - $(MCU_DIR)/src/chip_11u6x.c \ - $(MCU_DIR)/src/clock_11u6x.c \ - $(MCU_DIR)/src/gpio_11u6x.c \ - $(MCU_DIR)/src/iocon_11u6x.c \ - $(MCU_DIR)/src/syscon_11u6x.c \ - $(MCU_DIR)/src/sysinit_11u6x.c - -INC += \ - $(TOP)/$(MCU_DIR)/inc - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = LPC11U68 - -# flash using pyocd -flash: $(BUILD)/$(PROJECT).hex - pyocd flash -t lpc11u68 $< diff --git a/tinyusb/hw/bsp/lpcxpresso11u68/lpc11u68.ld b/tinyusb/hw/bsp/lpcxpresso11u68/lpc11u68.ld deleted file mode 100755 index 56d9e4b8..00000000 --- a/tinyusb/hw/bsp/lpcxpresso11u68/lpc11u68.ld +++ /dev/null @@ -1,242 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * (c) Code Red Technologies Ltd, 2008-2013 - * (c) NXP Semiconductors 2013-2019 - * Generated linker script file for LPC11U68 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 14, 2019 4:55:54 PM - */ - -MEMORY -{ - /* Define each memory region */ - MFlash256 (rx) : ORIGIN = 0x0, LENGTH = 0x40000 /* 256K bytes (alias Flash) */ - Ram0_32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - Ram1_2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ - Ram2USB_2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM3) */ -} - - /* Define a symbol for the top of each memory region */ - __base_MFlash256 = 0x0 ; /* MFlash256 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash256 = 0x0 + 0x40000 ; /* 256K bytes */ - __top_Flash = 0x0 + 0x40000 ; /* 256K bytes */ - __base_Ram0_32 = 0x10000000 ; /* Ram0_32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_Ram0_32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_Ram1_2 = 0x20000000 ; /* Ram1_2 */ - __base_RAM2 = 0x20000000 ; /* RAM2 */ - __top_Ram1_2 = 0x20000000 + 0x800 ; /* 2K bytes */ - __top_RAM2 = 0x20000000 + 0x800 ; /* 2K bytes */ - __base_Ram2USB_2 = 0x20004000 ; /* Ram2USB_2 */ - __base_RAM3 = 0x20004000 ; /* RAM3 */ - __top_Ram2USB_2 = 0x20004000 + 0x800 ; /* 2K bytes */ - __top_RAM3 = 0x20004000 + 0x800 ; /* 2K bytes */ - -ENTRY(ResetISR) - -SECTIONS -{ - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - LONG(LOADADDR(.data_RAM3)); - LONG( ADDR(.data_RAM3)); - LONG( SIZEOF(.data_RAM3)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - LONG( ADDR(.bss_RAM3)); - LONG( SIZEOF(.bss_RAM3)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlash256 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlash256 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlash256 - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > MFlash256 - __exidx_end = .; - - _etext = .; - - /* possible MTB section for Ram1_2 */ - .mtb_buffer_RAM2 (NOLOAD) : - { - KEEP(*(.mtb.$RAM2*)) - KEEP(*(.mtb.$Ram1_2*)) - } > Ram1_2 - - /* DATA section for Ram1_2 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$Ram1_2) - *(.data.$RAM2*) - *(.data.$Ram1_2*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > Ram1_2 AT>MFlash256 - /* possible MTB section for Ram2USB_2 */ - .mtb_buffer_RAM3 (NOLOAD) : - { - KEEP(*(.mtb.$RAM3*)) - KEEP(*(.mtb.$Ram2USB_2*)) - } > Ram2USB_2 - - /* DATA section for Ram2USB_2 */ - - .data_RAM3 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM3 = .) ; - *(.ramfunc.$RAM3) - *(.ramfunc.$Ram2USB_2) - *(.data.$RAM3*) - *(.data.$Ram2USB_2*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM3 = .) ; - } > Ram2USB_2 AT>MFlash256 - /* MAIN DATA SECTION */ - /* Default MTB section */ - .mtb_buffer_default (NOLOAD) : - { - KEEP(*(.mtb*)) - } > Ram0_32 - .uninit_RESERVED : ALIGN(4) - { - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > Ram0_32 - - /* Main DATA section (Ram0_32) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > Ram0_32 AT>MFlash256 - - /* BSS section for Ram1_2 */ - .bss_RAM2 : ALIGN(4) - { - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2*) - *(.bss.$Ram1_2*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > Ram1_2 - - /* BSS section for Ram2USB_2 */ - .bss_RAM3 : ALIGN(4) - { - PROVIDE(__start_bss_RAM3 = .) ; - *(.bss.$RAM3*) - *(.bss.$Ram2USB_2*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM3 = .) ; - } > Ram2USB_2 - - /* MAIN BSS SECTION */ - .bss : ALIGN(4) - { - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > Ram0_32 - - /* NOINIT section for Ram1_2 */ - .noinit_RAM2 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM2*) - *(.noinit.$Ram1_2*) - . = ALIGN(4) ; - } > Ram1_2 - - /* NOINIT section for Ram2USB_2 */ - .noinit_RAM3 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM3*) - *(.noinit.$Ram2USB_2*) - . = ALIGN(4) ; - } > Ram2USB_2 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): ALIGN(4) - { - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > Ram0_32 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_Ram0_32 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (( DEFINED(NMI_Handler) ? NMI_Handler : M0_NMI_Handler ) + 1) - + (( DEFINED(HardFault_Handler) ? HardFault_Handler : M0_HardFault_Handler ) + 1) - ) - ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c b/tinyusb/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c deleted file mode 100755 index e33a5c6e..00000000 --- a/tinyusb/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "../board.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT 2 -#define LED_PIN 17 -#define LED_STATE_ON 0 - -// Wake up Switch -#define BUTTON_PORT 0 -#define BUTTON_PIN 16 -#define BUTTON_STATE_ACTIVE 0 - -/* System oscillator rate and RTC oscillator rate */ -const uint32_t OscRateIn = 12000000; -const uint32_t RTCOscRateIn = 32768; - -/* Pin muxing table, only items that need changing from their default pin - state are in this table. Not every pin is mapped. */ -static const PINMUX_GRP_T pinmuxing[] = -{ - {0, 3, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // USB VBUS - {0, 18, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 RX - {0, 19, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 TX - {2, 0, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // XTALIN - {2, 1, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // XTALOUT -}; - -// Invoked by startup code -void SystemInit(void) -{ - /* Enable IOCON clock */ - Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON); - Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - Chip_SetupXtalClocking(); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - Chip_GPIO_Init(LPC_GPIO); - - // LED - Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); - - // USB: Setup PLL clock, and power - Chip_USB_Init(); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/tinyusb/hw/bsp/lpcxpresso1347/board.mk b/tinyusb/hw/bsp/lpcxpresso1347/board.mk deleted file mode 100755 index 0d56a33a..00000000 --- a/tinyusb/hw/bsp/lpcxpresso1347/board.mk +++ /dev/null @@ -1,44 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m3 \ - -nostdlib \ - -DCORE_M3 \ - -D__USE_LPCOPEN \ - -DCFG_EXAMPLE_MSC_READONLY \ - -DCFG_TUSB_MCU=OPT_MCU_LPC13XX \ - -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \ - -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' - -# startup.c and lpc_types.h cause following errors -CFLAGS += -Wno-error=strict-prototypes - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc13xx/lpc_chip_13xx - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/lpc1347.ld - -SRC_C += \ - src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc13xx.c \ - $(MCU_DIR)/src/chip_13xx.c \ - $(MCU_DIR)/src/clock_13xx.c \ - $(MCU_DIR)/src/gpio_13xx_1.c \ - $(MCU_DIR)/src/iocon_13xx.c \ - $(MCU_DIR)/src/sysctl_13xx.c \ - $(MCU_DIR)/src/sysinit_13xx.c - -INC += \ - $(TOP)/$(MCU_DIR)/inc - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM3 - -# For flash-jlink target -JLINK_DEVICE = LPC1347 - -# flash using jlink -flash: flash-jlink diff --git a/tinyusb/hw/bsp/lpcxpresso1347/lpc1347.ld b/tinyusb/hw/bsp/lpcxpresso1347/lpc1347.ld deleted file mode 100755 index 42a4bb25..00000000 --- a/tinyusb/hw/bsp/lpcxpresso1347/lpc1347.ld +++ /dev/null @@ -1,225 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * (c) Code Red Technologies Ltd, 2008-2013 - * (c) NXP Semiconductors 2013-2019 - * Generated linker script file for LPC1347 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 14, 2019 6:01:58 PM - */ - -MEMORY -{ - /* Define each memory region */ - MFlash64 (rx) : ORIGIN = 0x0, LENGTH = 0x10000 /* 64K bytes (alias Flash) */ - RamLoc8 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x2000 /* 8K bytes (alias RAM) */ - RamUsb2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ - RamPeriph2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes (alias RAM3) */ -} - - /* Define a symbol for the top of each memory region */ - __base_MFlash64 = 0x0 ; /* MFlash64 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash64 = 0x0 + 0x10000 ; /* 64K bytes */ - __top_Flash = 0x0 + 0x10000 ; /* 64K bytes */ - __base_RamLoc8 = 0x10000000 ; /* RamLoc8 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc8 = 0x10000000 + 0x2000 ; /* 8K bytes */ - __top_RAM = 0x10000000 + 0x2000 ; /* 8K bytes */ - __base_RamUsb2 = 0x20004000 ; /* RamUsb2 */ - __base_RAM2 = 0x20004000 ; /* RAM2 */ - __top_RamUsb2 = 0x20004000 + 0x800 ; /* 2K bytes */ - __top_RAM2 = 0x20004000 + 0x800 ; /* 2K bytes */ - __base_RamPeriph2 = 0x20000000 ; /* RamPeriph2 */ - __base_RAM3 = 0x20000000 ; /* RAM3 */ - __top_RamPeriph2 = 0x20000000 + 0x800 ; /* 2K bytes */ - __top_RAM3 = 0x20000000 + 0x800 ; /* 2K bytes */ - -ENTRY(ResetISR) - -SECTIONS -{ - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - LONG(LOADADDR(.data_RAM3)); - LONG( ADDR(.data_RAM3)); - LONG( SIZEOF(.data_RAM3)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - LONG( ADDR(.bss_RAM3)); - LONG( SIZEOF(.bss_RAM3)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlash64 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlash64 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlash64 - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > MFlash64 - __exidx_end = .; - - _etext = .; - - /* DATA section for RamUsb2 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamUsb2) - *(.data.$RAM2*) - *(.data.$RamUsb2*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > RamUsb2 AT>MFlash64 - /* DATA section for RamPeriph2 */ - - .data_RAM3 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM3 = .) ; - *(.ramfunc.$RAM3) - *(.ramfunc.$RamPeriph2) - *(.data.$RAM3*) - *(.data.$RamPeriph2*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM3 = .) ; - } > RamPeriph2 AT>MFlash64 - /* MAIN DATA SECTION */ - .uninit_RESERVED : ALIGN(4) - { - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc8 - - /* Main DATA section (RamLoc8) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > RamLoc8 AT>MFlash64 - - /* BSS section for RamUsb2 */ - .bss_RAM2 : ALIGN(4) - { - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2*) - *(.bss.$RamUsb2*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > RamUsb2 - - /* BSS section for RamPeriph2 */ - .bss_RAM3 : ALIGN(4) - { - PROVIDE(__start_bss_RAM3 = .) ; - *(.bss.$RAM3*) - *(.bss.$RamPeriph2*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM3 = .) ; - } > RamPeriph2 - - /* MAIN BSS SECTION */ - .bss : ALIGN(4) - { - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > RamLoc8 - - /* NOINIT section for RamUsb2 */ - .noinit_RAM2 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM2*) - *(.noinit.$RamUsb2*) - . = ALIGN(4) ; - } > RamUsb2 - - /* NOINIT section for RamPeriph2 */ - .noinit_RAM3 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM3*) - *(.noinit.$RamPeriph2*) - . = ALIGN(4) ; - } > RamPeriph2 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): ALIGN(4) - { - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > RamLoc8 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc8 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/lpcxpresso1347/lpcxpresso1347.c b/tinyusb/hw/bsp/lpcxpresso1347/lpcxpresso1347.c deleted file mode 100755 index a9a67ae3..00000000 --- a/tinyusb/hw/bsp/lpcxpresso1347/lpcxpresso1347.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "../board.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT 0 -#define LED_PIN 7 - -// Joytick Down if connected to LPCXpresso Base board -#define BUTTON_PORT 1 -#define BUTTON_PIN 20 - -//static const struct { -// uint8_t port; -// uint8_t pin; -//} buttons[] = -//{ -// {1, 22 }, // Joystick up -// {1, 20 }, // Joystick down -// {1, 23 }, // Joystick left -// {1, 21 }, // Joystick right -// {1, 19 }, // Joystick press -// {0, 1 }, // SW3 -//}; - -/* System oscillator rate and RTC oscillator rate */ -const uint32_t OscRateIn = 12000000; -const uint32_t ExtRateIn = 0; - -/* Pin muxing table, only items that need changing from their default pin - state are in this table. */ -static const PINMUX_GRP_T pinmuxing[] = -{ - {0, 1, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_1 used for CLKOUT */ - {0, 2, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_PULLUP)}, /* PIO0_2 used for SSEL */ - {0, 3, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_3 used for USB_VBUS */ - {0, 6, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_6 used for USB_CONNECT */ - {0, 8, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_8 used for MISO0 */ - {0, 9, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_9 used for MOSI0 */ - {0, 11, (IOCON_FUNC2 | IOCON_ADMODE_EN | IOCON_FILT_DIS)}, /* PIO0_11 used for AD0 */ - {0, 18, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_18 used for RXD */ - {0, 19, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_19 used for TXD */ - {1, 29, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO1_29 used for SCK0 */ -}; - -// Invoked by startup code -void SystemInit(void) -{ - /* Enable IOCON clock */ - Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON); - Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - Chip_SetupXtalClocking(); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - Chip_GPIO_Init(LPC_GPIO_PORT); - - // LED - Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, LED_PORT, LED_PIN); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); - - // USB: Setup PLL clock, and power - Chip_USB_Init(); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void board_led_write(bool state) -{ - Chip_GPIO_SetPinState(LPC_GPIO_PORT, LED_PORT, LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - // active low - return Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} diff --git a/tinyusb/hw/bsp/lpcxpresso1769/board.mk b/tinyusb/hw/bsp/lpcxpresso1769/board.mk deleted file mode 100755 index b69be39b..00000000 --- a/tinyusb/hw/bsp/lpcxpresso1769/board.mk +++ /dev/null @@ -1,43 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m3 \ - -nostdlib \ - -DCORE_M3 \ - -D__USE_LPCOPEN \ - -DCFG_TUSB_MCU=OPT_MCU_LPC175X_6X \ - -DRTC_EV_SUPPORT=0 - -# lpc_types.h cause following errors -CFLAGS += -Wno-error=strict-prototypes - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc175x_6x/lpc_chip_175x_6x - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/lpc1769.ld - -SRC_C += \ - src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc175x_6x.c \ - $(MCU_DIR)/src/chip_17xx_40xx.c \ - $(MCU_DIR)/src/clock_17xx_40xx.c \ - $(MCU_DIR)/src/gpio_17xx_40xx.c \ - $(MCU_DIR)/src/iocon_17xx_40xx.c \ - $(MCU_DIR)/src/sysctl_17xx_40xx.c \ - $(MCU_DIR)/src/sysinit_17xx_40xx.c \ - $(MCU_DIR)/src/uart_17xx_40xx.c - -INC += \ - $(TOP)/$(MCU_DIR)/inc - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM3 - -# For flash-jlink target -JLINK_DEVICE = LPC1769 - -# flash using jlink -flash: flash-jlink diff --git a/tinyusb/hw/bsp/lpcxpresso1769/lpc1769.ld b/tinyusb/hw/bsp/lpcxpresso1769/lpc1769.ld deleted file mode 100755 index d1c83d8e..00000000 --- a/tinyusb/hw/bsp/lpcxpresso1769/lpc1769.ld +++ /dev/null @@ -1,184 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * (c) Code Red Technologies Ltd, 2008-2013 - * (c) NXP Semiconductors 2013-2019 - * Generated linker script file for LPC1769 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 14, 2019 6:39:29 PM - */ - -MEMORY -{ - /* Define each memory region */ - MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ -} - - /* Define a symbol for the top of each memory region */ - __base_MFlash512 = 0x0 ; /* MFlash512 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ - __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ - __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ - __base_RAM2 = 0x2007c000 ; /* RAM2 */ - __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ - __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ - -ENTRY(ResetISR) - -SECTIONS -{ - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlash512 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlash512 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlash512 - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > MFlash512 - __exidx_end = .; - - _etext = .; - - /* DATA section for RamAHB32 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamAHB32) - *(.data.$RAM2*) - *(.data.$RamAHB32*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > RamAHB32 AT>MFlash512 - /* MAIN DATA SECTION */ - .uninit_RESERVED : ALIGN(4) - { - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc32 - - /* Main DATA section (RamLoc32) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > RamLoc32 AT>MFlash512 - - /* BSS section for RamAHB32 */ - .bss_RAM2 : ALIGN(4) - { - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2*) - *(.bss.$RamAHB32*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > RamAHB32 - - /* MAIN BSS SECTION */ - .bss : ALIGN(4) - { - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > RamLoc32 - - /* NOINIT section for RamAHB32 */ - .noinit_RAM2 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM2*) - *(.noinit.$RamAHB32*) - . = ALIGN(4) ; - } > RamAHB32 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): ALIGN(4) - { - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > RamLoc32 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/lpcxpresso1769/lpcxpresso1769.c b/tinyusb/hw/bsp/lpcxpresso1769/lpcxpresso1769.c deleted file mode 100755 index 101cc8a4..00000000 --- a/tinyusb/hw/bsp/lpcxpresso1769/lpcxpresso1769.c +++ /dev/null @@ -1,209 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "../board.h" - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) -{ - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST - tuh_int_handler(0); - #endif - - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - tud_int_handler(0); - #endif -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT 0 -#define LED_PIN 22 -#define LED_STATE_ON 1 - -// JOYSTICK_DOWN if using LPCXpresso Base Board -#define BUTTON_PORT 0 -#define BUTTON_PIN 15 -#define BUTTON_STATE_ACTIVE 0 - -#define BOARD_UART_PORT LPC_UART3 - -/* System oscillator rate and RTC oscillator rate */ -const uint32_t OscRateIn = 12000000; -const uint32_t RTCOscRateIn = 32768; - -/* Pin muxing configuration */ -static const PINMUX_GRP_T pinmuxing[] = -{ - {0, 0, IOCON_MODE_INACT | IOCON_FUNC2}, /* TXD3 */ - {0, 1, IOCON_MODE_INACT | IOCON_FUNC2}, /* RXD3 */ - {LED_PORT, LED_PIN, IOCON_MODE_INACT | IOCON_FUNC0}, /* Led 0 */ - - /* Joystick buttons. */ -// {2, 3, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_UP */ - {BUTTON_PORT, BUTTON_PIN, IOCON_FUNC0 | IOCON_MODE_PULLUP}, /* JOYSTICK_DOWN */ -// {2, 4, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_LEFT */ -// {0, 16, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_RIGHT */ -// {0, 17, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_PRESS */ -}; - -static const PINMUX_GRP_T pin_usb_mux[] = -{ - {0, 29, IOCON_MODE_INACT | IOCON_FUNC1}, // D+ - {0, 30, IOCON_MODE_INACT | IOCON_FUNC1}, // D- - {2, 9, IOCON_MODE_INACT | IOCON_FUNC1}, // Soft Connect - - {1, 19, IOCON_MODE_INACT | IOCON_FUNC2}, // USB_PPWR (Host mode) - - // VBUS is not connected on this board, so leave the pin at default setting. - /// Chip_IOCON_PinMux(LPC_IOCON, 1, 30, IOCON_MODE_INACT, IOCON_FUNC2); // USB VBUS -}; - -// Invoked by startup code -void SystemInit(void) -{ -#ifdef __USE_LPCOPEN - extern void (* const g_pfnVectors[])(void); - unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; - *pSCB_VTOR = (unsigned int) g_pfnVectors; -#endif - - Chip_IOCON_Init(LPC_IOCON); - Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - Chip_SetupXtalClocking(); - - Chip_SYSCTL_SetFLASHAccess(FLASHTIM_100MHZ_CPU); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - Chip_GPIO_Init(LPC_GPIO); - - // LED - Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); - -#if 0 - //------------- UART -------------// - PINSEL_CFG_Type PinCfg = - { - .Portnum = 0, - .Pinnum = 0, // TXD is P0.0 - .Funcnum = 2, - .OpenDrain = 0, - .Pinmode = 0 - }; - PINSEL_ConfigPin(&PinCfg); - - PinCfg.Portnum = 0; - PinCfg.Pinnum = 1; // RXD is P0.1 - PINSEL_ConfigPin(&PinCfg); - - UART_CFG_Type UARTConfigStruct; - UART_ConfigStructInit(&UARTConfigStruct); - UARTConfigStruct.Baud_rate = CFG_BOARD_UART_BAUDRATE; - - UART_Init(BOARD_UART_PORT, &UARTConfigStruct); - UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit -#endif - - //------------- USB -------------// - Chip_IOCON_SetPinMuxing(LPC_IOCON, pin_usb_mux, sizeof(pin_usb_mux) / sizeof(PINMUX_GRP_T)); - Chip_USB_Init(); - - enum { - USBCLK_DEVCIE = 0x12, // AHB + Device - USBCLK_HOST = 0x19, // AHB + Host + OTG -// 0x1B // Host + Device + OTG + AHB - }; - - uint32_t const clk_en = TUSB_OPT_DEVICE_ENABLED ? USBCLK_DEVCIE : USBCLK_HOST; - - LPC_USB->OTGClkCtrl = clk_en; - while ( (LPC_USB->OTGClkSt & clk_en) != clk_en ); - -#if TUSB_OPT_HOST_ENABLED - // set portfunc to host !!! - LPC_USB->StCtrl = 0x3; // should be 1 -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ -// return UART_ReceiveByte(BOARD_UART_PORT); - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ -// UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING); - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/tinyusb/hw/bsp/lpcxpresso51u68/board.mk b/tinyusb/hw/bsp/lpcxpresso51u68/board.mk deleted file mode 100755 index 98bef675..00000000 --- a/tinyusb/hw/bsp/lpcxpresso51u68/board.mk +++ /dev/null @@ -1,52 +0,0 @@ -SDK_DIR = hw/mcu/nxp/mcux-sdk -DEPS_SUBMODULES += $(SDK_DIR) - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ - -DCPU_LPC51U68JBD64 \ - -DCFG_TUSB_MCU=OPT_MCU_LPC51UXX \ - -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data")))' \ - -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter - -MCU_DIR = $(SDK_DIR)/devices/LPC51U68 - -# All source paths should be relative to the top level. -LD_FILE = $(MCU_DIR)/gcc/LPC51U68_flash.ld - -SRC_C += \ - src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ - $(MCU_DIR)/system_LPC51U68.c \ - $(MCU_DIR)/drivers/fsl_clock.c \ - $(MCU_DIR)/drivers/fsl_power.c \ - $(MCU_DIR)/drivers/fsl_reset.c \ - $(SDK_DIR)/drivers/lpc_gpio/fsl_gpio.c \ - $(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \ - $(SDK_DIR)/drivers/flexcomm/fsl_usart.c - -INC += \ - $(TOP)/$(MCU_DIR)/../../CMSIS/Include \ - $(TOP)/$(MCU_DIR) \ - $(TOP)/$(MCU_DIR)/drivers \ - $(TOP)/$(SDK_DIR)/drivers/common \ - $(TOP)/$(SDK_DIR)/drivers/flexcomm \ - $(TOP)/$(SDK_DIR)/drivers/lpc_iocon \ - $(TOP)/$(SDK_DIR)/drivers/lpc_gpio - -SRC_S += $(MCU_DIR)/gcc/startup_LPC51U68.S - -LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower.a - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM0 - -JLINK_DEVICE = LPC51U68 -PYOCD_TARGET = LPC51U68 - -# flash using pyocd (51u68 is not supported yet) -flash: flash-pyocd diff --git a/tinyusb/hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c b/tinyusb/hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c deleted file mode 100755 index 6bade774..00000000 --- a/tinyusb/hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2018, hathach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../board.h" -#include "fsl_device_registers.h" -#include "fsl_gpio.h" -#include "fsl_power.h" -#include "fsl_iocon.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT 0 -#define LED_PIN 29 -#define LED_STATE_ON 0 - -// WAKE button -#define BUTTON_PORT 0 -#define BUTTON_PIN 24 - -// IOCON pin mux -#define IOCON_PIO_DIGITAL_EN 0x80u /*!< Enables digital function */ -#define IOCON_PIO_FUNC1 0x01u /*!< Selects pin function 1 */ -#define IOCON_PIO_FUNC7 0x07u /*!< Selects pin function 7 */ -#define IOCON_PIO_INPFILT_OFF 0x0100u /*!< Input filter disabled */ -#define IOCON_PIO_INV_DI 0x00u /*!< Input function is not inverted */ -#define IOCON_PIO_MODE_INACT 0x00u /*!< No addition pin function */ -#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!< Open drain is disabled */ -#define IOCON_PIO_SLEW_STANDARD 0x00u /*!< Standard mode, output slew rate control is enabled */ - -/**************************************************************** -name: BOARD_BootClockFROHF96M -outputs: -- {id: SYSTICK_clock.outFreq, value: 96 MHz} -- {id: System_clock.outFreq, value: 96 MHz} -settings: -- {id: SYSCON.MAINCLKSELA.sel, value: SYSCON.fro_hf} -sources: -- {id: SYSCON.fro_hf.outFreq, value: 96 MHz} -******************************************************************/ -void BootClockFROHF96M(void) -{ - /*!< Set up the clock sources */ - /*!< Set up FRO */ - POWER_DisablePD(kPDRUNCFG_PD_FRO_EN); /*!< Ensure FRO is on */ - CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change voltage without - accidentally being below the voltage for current speed */ - POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ - CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */ - - CLOCK_SetupFROClocking(96000000U); /*!< Set up high frequency FRO output to selected frequency */ - - /*!< Set up dividers */ - CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ - CLOCK_SetClkDiv(kCLOCK_DivSystickClk, 0U, true); /*!< Reset SYSTICKCLKDIV divider counter and halt it */ - CLOCK_SetClkDiv(kCLOCK_DivSystickClk, 1U, false); /*!< Set SYSTICKCLKDIV divider to value 1 */ - - /*!< Set up clock selectors - Attach clocks to the peripheries */ - CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */ - /*!< Set SystemCoreClock variable. */ - SystemCoreClock = 96000000U; -} - -void board_init(void) -{ - // Enable IOCON clock - CLOCK_EnableClock(kCLOCK_Iocon); - - // Enable GPIO0 clock - CLOCK_EnableClock(kCLOCK_Gpio0); - - // Init 96 MHz clock - BootClockFROHF96M(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - GPIO_PortInit(GPIO, LED_PORT); - GPIO_PortInit(GPIO, BUTTON_PORT); - - // LED - gpio_pin_config_t const led_config = { kGPIO_DigitalOutput, 0}; - GPIO_PinInit(GPIO, LED_PORT, LED_PIN, &led_config); - board_led_write(true); - - // Button - gpio_pin_config_t const button_config = { kGPIO_DigitalInput, 0}; - GPIO_PinInit(GPIO, BUTTON_PORT, BUTTON_PIN, &button_config); - - // USB - const uint32_t port1_pin6_config = ( - IOCON_PIO_FUNC7 | /* Pin is configured as USB0_VBUS */ - IOCON_PIO_MODE_INACT | /* No addition pin function */ - IOCON_PIO_INV_DI | /* Input function is not inverted */ - IOCON_PIO_DIGITAL_EN | /* Enables digital function */ - IOCON_PIO_INPFILT_OFF | /* Input filter disabled */ - IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */ - ); - IOCON_PinMuxSet(IOCON, 1, 6, port1_pin6_config); /* PORT1 PIN6 (coords: 26) is configured as USB0_VBUS */ - - POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); /*Turn on USB Phy */ - CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); /* enable USB IP clock */ -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - GPIO_PinWrite(GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - // active low - return 1-GPIO_PinRead(GPIO, BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/tinyusb/hw/bsp/mbed1768/board.mk b/tinyusb/hw/bsp/mbed1768/board.mk deleted file mode 100755 index e99df9f0..00000000 --- a/tinyusb/hw/bsp/mbed1768/board.mk +++ /dev/null @@ -1,45 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m3 \ - -nostdlib \ - -DCORE_M3 \ - -D__USE_LPCOPEN \ - -DCFG_TUSB_MCU=OPT_MCU_LPC175X_6X \ - -DRTC_EV_SUPPORT=0 - -# startup.c and lpc_types.h cause following errors -CFLAGS += -Wno-error=strict-prototypes - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc175x_6x/lpc_chip_175x_6x - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/lpc1768.ld - -SRC_C += \ - src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc175x_6x.c \ - $(MCU_DIR)/src/chip_17xx_40xx.c \ - $(MCU_DIR)/src/clock_17xx_40xx.c \ - $(MCU_DIR)/src/gpio_17xx_40xx.c \ - $(MCU_DIR)/src/iocon_17xx_40xx.c \ - $(MCU_DIR)/src/sysctl_17xx_40xx.c \ - $(MCU_DIR)/src/sysinit_17xx_40xx.c \ - $(MCU_DIR)/src/uart_17xx_40xx.c - -INC += \ - $(TOP)/$(MCU_DIR)/inc - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM3 - -# For flash-jlink target -JLINK_DEVICE = LPC1768 - -# flash using pyocd -flash: $(BUILD)/$(PROJECT).hex - pyocd flash -t lpc1768 $< - diff --git a/tinyusb/hw/bsp/mbed1768/lpc1768.ld b/tinyusb/hw/bsp/mbed1768/lpc1768.ld deleted file mode 100755 index d1c83d8e..00000000 --- a/tinyusb/hw/bsp/mbed1768/lpc1768.ld +++ /dev/null @@ -1,184 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * (c) Code Red Technologies Ltd, 2008-2013 - * (c) NXP Semiconductors 2013-2019 - * Generated linker script file for LPC1769 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 14, 2019 6:39:29 PM - */ - -MEMORY -{ - /* Define each memory region */ - MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ -} - - /* Define a symbol for the top of each memory region */ - __base_MFlash512 = 0x0 ; /* MFlash512 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ - __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ - __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ - __base_RAM2 = 0x2007c000 ; /* RAM2 */ - __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ - __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ - -ENTRY(ResetISR) - -SECTIONS -{ - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlash512 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlash512 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlash512 - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > MFlash512 - __exidx_end = .; - - _etext = .; - - /* DATA section for RamAHB32 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamAHB32) - *(.data.$RAM2*) - *(.data.$RamAHB32*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > RamAHB32 AT>MFlash512 - /* MAIN DATA SECTION */ - .uninit_RESERVED : ALIGN(4) - { - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc32 - - /* Main DATA section (RamLoc32) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > RamLoc32 AT>MFlash512 - - /* BSS section for RamAHB32 */ - .bss_RAM2 : ALIGN(4) - { - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2*) - *(.bss.$RamAHB32*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > RamAHB32 - - /* MAIN BSS SECTION */ - .bss : ALIGN(4) - { - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > RamLoc32 - - /* NOINIT section for RamAHB32 */ - .noinit_RAM2 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM2*) - *(.noinit.$RamAHB32*) - . = ALIGN(4) ; - } > RamAHB32 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): ALIGN(4) - { - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > RamLoc32 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/mbed1768/mbed1768.c b/tinyusb/hw/bsp/mbed1768/mbed1768.c deleted file mode 100755 index 5495ed16..00000000 --- a/tinyusb/hw/bsp/mbed1768/mbed1768.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "../board.h" - -#define LED_PORT 1 -#define LED_PIN 18 -#define LED_STATE_ON 1 - -// JOYSTICK_DOWN if using LPCXpresso Base Board -#define BUTTON_PORT 0 -#define BUTTON_PIN 15 -#define BUTTON_STATE_ACTIVE 0 - -#define BOARD_UART_PORT LPC_UART3 - -/* System oscillator rate and RTC oscillator rate */ -const uint32_t OscRateIn = 10000000; -const uint32_t RTCOscRateIn = 32768; - -/* Pin muxing configuration */ -static const PINMUX_GRP_T pinmuxing[] = -{ - {LED_PORT, LED_PIN, IOCON_MODE_INACT | IOCON_FUNC0}, - {BUTTON_PORT, BUTTON_PIN, IOCON_FUNC0 | IOCON_MODE_PULLUP}, -}; - -static const PINMUX_GRP_T pin_usb_mux[] = -{ - {0, 29, IOCON_MODE_INACT | IOCON_FUNC1}, // D+ - {0, 30, IOCON_MODE_INACT | IOCON_FUNC1}, // D- - {2, 9, IOCON_MODE_INACT | IOCON_FUNC1}, // Connect - - {1, 19, IOCON_MODE_INACT | IOCON_FUNC2}, // USB_PPWR - {1, 22, IOCON_MODE_INACT | IOCON_FUNC2}, // USB_PWRD - - /* VBUS is not connected on this board, so leave the pin at default setting. */ - /*Chip_IOCON_PinMux(LPC_IOCON, 1, 30, IOCON_MODE_INACT, IOCON_FUNC2);*/ /* USB VBUS */ -}; - -// Invoked by startup code -void SystemInit(void) -{ -#ifdef __USE_LPCOPEN - extern void (* const g_pfnVectors[])(void); - unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; - *pSCB_VTOR = (unsigned int) g_pfnVectors; -#endif - - Chip_IOCON_Init(LPC_IOCON); - Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - Chip_SetupXtalClocking(); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - Chip_GPIO_Init(LPC_GPIO); - - // LED - Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); - -#if 0 - //------------- UART -------------// - PINSEL_CFG_Type PinCfg = - { - .Portnum = 0, - .Pinnum = 0, // TXD is P0.0 - .Funcnum = 2, - .OpenDrain = 0, - .Pinmode = 0 - }; - PINSEL_ConfigPin(&PinCfg); - - PinCfg.Portnum = 0; - PinCfg.Pinnum = 1; // RXD is P0.1 - PINSEL_ConfigPin(&PinCfg); - - UART_CFG_Type UARTConfigStruct; - UART_ConfigStructInit(&UARTConfigStruct); - UARTConfigStruct.Baud_rate = CFG_BOARD_UART_BAUDRATE; - - UART_Init(BOARD_UART_PORT, &UARTConfigStruct); - UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit -#endif - - //------------- USB -------------// - Chip_IOCON_SetPinMuxing(LPC_IOCON, pin_usb_mux, sizeof(pin_usb_mux) / sizeof(PINMUX_GRP_T)); - Chip_USB_Init(); - - enum { - USBCLK_DEVCIE = 0x12, // AHB + Device - USBCLK_HOST = 0x19, // AHB + Host + OTG -// 0x1B // Host + Device + OTG + AHB - }; - - uint32_t const clk_en = TUSB_OPT_DEVICE_ENABLED ? USBCLK_DEVCIE : USBCLK_HOST; - - LPC_USB->OTGClkCtrl = clk_en; - while ( (LPC_USB->OTGClkSt & clk_en) != clk_en ); - -#if TUSB_OPT_HOST_ENABLED - // set portfunc to host !!! - LPC_USB->StCtrl = 0x3; // should be 1 -#endif -} - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) -{ - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST - tuh_int_handler(0); - #endif - - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - tud_int_handler(0); - #endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ -// return UART_ReceiveByte(BOARD_UART_PORT); - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ -// UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING); - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/tinyusb/hw/bsp/msp430/boards/msp_exp430f5529lp/board.h b/tinyusb/hw/bsp/msp430/boards/msp_exp430f5529lp/board.h deleted file mode 100755 index ccfe321c..00000000 --- a/tinyusb/hw/bsp/msp430/boards/msp_exp430f5529lp/board.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define LED_PORT P1OUT -#define LED_PIN BIT0 -#define LED_STATE_ON 1 - -#define BUTTON_PORT P1IN -#define BUTTON_PIN BIT1 -#define BUTTON_STATE_ACTIVE 0 - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/tinyusb/hw/bsp/msp430/family.c b/tinyusb/hw/bsp/msp430/family.c deleted file mode 100755 index 4b8ae393..00000000 --- a/tinyusb/hw/bsp/msp430/family.c +++ /dev/null @@ -1,218 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board.h" -#include "board.h" -#include "msp430.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void __attribute__ ((interrupt(USB_UBM_VECTOR))) USB_UBM_ISR(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -uint32_t cnt = 0; - -static void SystemClock_Config(void) -{ - WDTCTL = WDTPW + WDTHOLD; // Disable watchdog. - - // Increase VCore to level 2- required for 16 MHz operation on this MCU. - PMMCTL0 = PMMPW + PMMCOREV_2; - - UCSCTL3 = SELREF__XT2CLK; // FLL is fed by XT2. - - // XT1 used for ACLK (default- not used in this demo) - P5SEL |= BIT4; // Required to enable XT1 - // Loop until XT1 fault flag is cleared. - do - { - UCSCTL7 &= ~XT1LFOFFG; - }while(UCSCTL7 & XT1LFOFFG); - - // XT2 is 4 MHz an external oscillator, use PLL to boost to 16 MHz. - P5SEL |= BIT2; // Required to enable XT2. - // Loop until XT2 fault flag is cleared - do - { - UCSCTL7 &= ~XT2OFFG; - }while(UCSCTL7 & XT2OFFG); - - // Kickstart the DCO into the correct frequency range, otherwise a - // fault will occur. - // FIXME: DCORSEL_6 should work according to datasheet params, but generates - // a fault. I am not sure why it faults. - UCSCTL1 = DCORSEL_7; - UCSCTL2 = FLLD_2 + 3; // DCO freq = D * (N + 1) * (FLLREFCLK / n) - // DCOCLKDIV freq = (N + 1) * (FLLREFCLK / n) - // N = 3, D = 2, thus DCO freq = 32 MHz. - - // MCLK configured for 16 MHz using XT2. - // SMCLK configured for 8 MHz using XT2. - UCSCTL4 |= SELM__DCOCLKDIV + SELS__DCOCLKDIV; - UCSCTL5 |= DIVM__16 + DIVS__2; - - // Now wait till everything's stabilized. - do - { - UCSCTL7 &= ~(XT2OFFG + XT1LFOFFG + DCOFFG); - SFRIFG1 &= ~OFIFG; - }while(SFRIFG1 & OFIFG); - - // Configure Timer A to use SMCLK as a source. Count 1000 ticks at 1 MHz. - TA0CCTL0 |= CCIE; - TA0CCR0 = 999; // 1000 ticks. - TA0CTL |= TASSEL_2 + ID_3 + MC__UP; // Use SMCLK, divide by 8, start timer. - - // Initialize USB power and PLL. - USBKEYPID = USBKEY; - - // VUSB enabled automatically. - // Wait two milliseconds to stabilize, per manual recommendation. - uint32_t ms_elapsed = board_millis(); - do - { - while((board_millis() - ms_elapsed) < 2); - }while(!(USBPWRCTL & USBBGVBV)); - - // USB uses XT2 (4 MHz) directly. Enable the PLL. - USBPLLDIVB |= USBPLL_SETCLK_4_0; - USBPLLCTL |= (UPFDEN | UPLLEN); - - // Wait until PLL locks. Check every 2ms, per manual. - ms_elapsed = board_millis(); - do - { - USBPLLIR &= ~USBOOLIFG; - while((board_millis() - ms_elapsed) < 2); - }while(USBPLLIR & USBOOLIFG); - - USBKEYPID = 0; -} - -uint32_t wait = 0; - -void board_init(void) -{ - __bis_SR_register(GIE); // Enable interrupts. - SystemClock_Config(); - - // Enable basic I/O. - P1DIR |= LED_PIN; // LED output. - P1REN |= BUTTON_PIN; // Internal resistor enable. - P1OUT |= BUTTON_PIN; // Pullup. - - // Enable the backchannel UART (115200) - P4DIR |= BIT5; - P4SEL |= (BIT5 | BIT4); - - UCA1CTL1 |= (UCSSEL__SMCLK | UCSWRST); // Hold in reset, use SMCLK. - UCA1BRW = 4; - UCA1MCTL |= (UCBRF_3 | UCBRS_5 | UCOS16); // Overampling mode, 115200 baud. - // Copied from manual. - UCA1CTL1 &= ~UCSWRST; - - // Set up USB pins. - USBKEYPID = USBKEY; - USBPHYCTL |= PUSEL; // Convert USB D+/D- pins to USB functionality. - USBKEYPID = 0; -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - if(state) - { - LED_PORT |= LED_PIN; - } - else - { - LED_PORT &= ~LED_PIN; - } -} - -uint32_t board_button_read(void) -{ - return ((P1IN & BIT1) >> 1) == BUTTON_STATE_ACTIVE; -} - -int board_uart_read(uint8_t * buf, int len) -{ - for(int i = 0; i < len; i++) - { - // Wait until something to receive (cleared by reading buffer). - while(!(UCA1IFG & UCRXIFG)); - buf[i] = UCA1RXBUF; - } - - return len; -} - -int board_uart_write(void const * buf, int len) -{ - const char * char_buf = (const char *) buf; - - for(int i = 0; i < len; i++) - { - // Wait until TX buffer is empty (cleared by writing buffer). - while(!(UCA1IFG & UCTXIFG)); - UCA1TXBUF = char_buf[i]; - } - - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void __attribute__ ((interrupt(TIMER0_A0_VECTOR))) TIMER0_A0_ISR (void) -{ - system_ticks++; - // TAxCCR0 CCIFG resets itself as soon as interrupt is invoked. -} - -uint32_t board_millis(void) -{ - uint32_t systick_mirror; - - // 32-bit update is not atomic on MSP430. We can read the bottom 16-bits, - // an interrupt occurs, updates _all_ 32 bits, and then we return a - // garbage value. And I've seen it happen! - TA0CCTL0 &= ~CCIE; - systick_mirror = system_ticks; - TA0CCTL0 |= CCIE; - - return systick_mirror; -} -#endif diff --git a/tinyusb/hw/bsp/msp430/family.mk b/tinyusb/hw/bsp/msp430/family.mk deleted file mode 100755 index ceafa6ec..00000000 --- a/tinyusb/hw/bsp/msp430/family.mk +++ /dev/null @@ -1,35 +0,0 @@ -CROSS_COMPILE = msp430-elf- -DEPS_SUBMODULES += hw/mcu/ti -SKIP_NANOLIB = 1 - -CFLAGS += \ - -D__MSP430F5529__ \ - -DCFG_TUSB_MCU=OPT_MCU_MSP430x5xx \ - -DCFG_EXAMPLE_MSC_READONLY \ - -DCFG_TUD_ENDPOINT0_SIZE=8 - -# All source paths should be relative to the top level. -LD_FILE = hw/mcu/ti/msp430/msp430-gcc-support-files/include/msp430f5529.ld -LDINC += $(TOP)/hw/mcu/ti/msp430/msp430-gcc-support-files/include -LDFLAGS += $(addprefix -L,$(LDINC)) - -SRC_C += src/portable/ti/msp430x5xx/dcd_msp430x5xx.c - -INC += \ - $(TOP)/hw/mcu/ti/msp430/msp430-gcc-support-files/include \ - $(TOP)/$(BOARD_PATH) - -# export for libmsp430.so to same installation -ifneq ($(OS),Windows_NT) -export LD_LIBRARY_PATH=$(dir $(shell which MSP430Flasher)) -endif - -# flash target using TI MSP430-Flasher -# http://www.ti.com/tool/MSP430-FLASHER -# Please add its installation dir to PATH -flash: $(BUILD)/$(PROJECT).hex - MSP430Flasher -w $< -z [VCC] - -# flash target using mspdebug. -flash-mspdebug: $(BUILD)/$(PROJECT).elf - $(MSPDEBUG) tilib "prog $<" --allow-fw-update diff --git a/tinyusb/hw/bsp/ngx4330/board.mk b/tinyusb/hw/bsp/ngx4330/board.mk deleted file mode 100755 index 04c37fee..00000000 --- a/tinyusb/hw/bsp/ngx4330/board.mk +++ /dev/null @@ -1,45 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib \ - -DCORE_M4 \ - -D__USE_LPCOPEN \ - -DCFG_TUSB_MCU=OPT_MCU_LPC43XX - -# mcu driver cause following warnings -CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc43xx/lpc_chip_43xx - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/ngx4330.ld - -SRC_C += \ - src/portable/nxp/transdimension/dcd_transdimension.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc43xx.c \ - $(MCU_DIR)/src/chip_18xx_43xx.c \ - $(MCU_DIR)/src/clock_18xx_43xx.c \ - $(MCU_DIR)/src/gpio_18xx_43xx.c \ - $(MCU_DIR)/src/sysinit_18xx_43xx.c \ - $(MCU_DIR)/src/uart_18xx_43xx.c \ - $(MCU_DIR)/src/fpu_init.c - -INC += \ - $(TOP)/$(MCU_DIR)/inc \ - $(TOP)/$(MCU_DIR)/inc/config_43xx - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = LPC4330 -JLINK_IF = swd - -# flash using jlink -flash: flash-jlink diff --git a/tinyusb/hw/bsp/ngx4330/ngx4330.c b/tinyusb/hw/bsp/ngx4330/ngx4330.c deleted file mode 100755 index b63f9b89..00000000 --- a/tinyusb/hw/bsp/ngx4330/ngx4330.c +++ /dev/null @@ -1,264 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "../board.h" - -#define LED_PORT 1 -#define LED_PIN 12 -#define LED_STATE_ON 0 - -#define BUTTON_PORT 0 -#define BUTTON_PIN 7 -#define BUTTON_STATE_ACTIVE 0 - -#define BOARD_UART_PORT LPC_USART0 -#define BOARD_UART_PIN_PORT 0x0f -#define BOARD_UART_PIN_TX 10 // PF.10 : UART0_TXD -#define BOARD_UART_PIN_RX 11 // PF.11 : UART0_RXD - -/*------------------------------------------------------------------*/ -/* BOARD API - *------------------------------------------------------------------*/ - -/* System configuration variables used by chip driver */ -const uint32_t OscRateIn = 12000000; -const uint32_t ExtRateIn = 0; - -static const PINMUX_GRP_T pinmuxing[] = -{ - // LED P2.12 as GPIO 1.12 - {2, 11, (SCU_MODE_INBUFF_EN | SCU_MODE_PULLDOWN | SCU_MODE_FUNC0)}, - - // Button P2.7 as GPIO 0.7 - {2, 7, (SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC0)}, - - // USB - {2, 6, (SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC4)}, // USB1_PWR_EN - {2, 5, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2)}, // USB1_VBUS - {1, 7, (SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC4)}, // USB0_PWRN_EN - - // SPIFI - {3, 3, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI CLK */ - {3, 4, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI D3 */ - {3, 5, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI D2 */ - {3, 6, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI D1 */ - {3, 7, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI D0 */ - {3, 8, (SCU_PINIO_FAST | SCU_MODE_FUNC3)} /* SPIFI CS/SSEL */ -}; - -// Invoked by startup code -void SystemInit(void) -{ -#ifdef __USE_LPCOPEN - extern void (* const g_pfnVectors[])(void); - unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; - *pSCB_VTOR = (unsigned int) g_pfnVectors; - -#if __FPU_USED == 1 - fpuInit(); -#endif -#endif // __USE_LPCOPEN - - // Set up pinmux - Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - - //------------- Set up clock -------------// - Chip_Clock_SetBaseClock(CLK_BASE_SPIFI, CLKIN_IRC, true, false); // change SPIFI to IRC during clock programming - LPC_SPIFI->CTRL |= SPIFI_CTRL_FBCLK(1); // and set FBCLK in SPIFI controller - - Chip_SetupCoreClock(CLKIN_CRYSTAL, MAX_CLOCK_FREQ, true); - - /* Reset and enable 32Khz oscillator */ - LPC_CREG->CREG0 &= ~((1 << 3) | (1 << 2)); - LPC_CREG->CREG0 |= (1 << 1) | (1 << 0); - - /* Setup a divider E for main PLL clock switch SPIFI clock to that divider. - Divide rate is based on CPU speed and speed of SPI FLASH part. */ -#if (MAX_CLOCK_FREQ > 180000000) - Chip_Clock_SetDivider(CLK_IDIV_E, CLKIN_MAINPLL, 5); -#else - Chip_Clock_SetDivider(CLK_IDIV_E, CLKIN_MAINPLL, 4); -#endif - Chip_Clock_SetBaseClock(CLK_BASE_SPIFI, CLKIN_IDIVE, true, false); - - /* Setup system base clocks and initial states. This won't enable and - disable individual clocks, but sets up the base clock sources for - each individual peripheral clock. */ - Chip_Clock_SetBaseClock(CLK_BASE_USB1, CLKIN_IDIVD, true, true); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - Chip_GPIO_Init(LPC_GPIO_PORT); - - // LED - Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, LED_PORT, LED_PIN); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); - -#if 0 - //------------- UART -------------// - scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN, FUNC1); - scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN | MD_EZI | MD_ZI, FUNC1); - - UART_CFG_Type UARTConfigStruct; - UART_ConfigStructInit(&UARTConfigStruct); - UARTConfigStruct.Baud_rate = CFG_BOARD_UART_BAUDRATE; - UARTConfigStruct.Clock_Speed = 0; - - UART_Init(BOARD_UART_PORT, &UARTConfigStruct); - UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit -#endif - - //------------- USB -------------// - enum { - USBMODE_DEVICE = 2, - USBMODE_HOST = 3 - }; - - enum { - USBMODE_VBUS_LOW = 0, - USBMODE_VBUS_HIGH = 1 - }; - - /* USB0 - * For USB Device operation; insert jumpers in position 1-2 in JP17/JP18/JP19. GPIO28 controls USB - * connect functionality and LED32 lights when the USB Device is connected. SJ4 has pads 1-2 shorted - * by default. LED33 is controlled by GPIO27 and signals USB-up state. GPIO54 is used for VBUS - * sensing. - * For USB Host operation; insert jumpers in position 2-3 in JP17/JP18/JP19. USB Host power is - * controlled via distribution switch U20 (found in schematic page 11). Signal GPIO26 is active low and - * enables +5V on VBUS2. LED35 light whenever +5V is present on VBUS2. GPIO55 is connected to - * status feedback from the distribution switch. GPIO54 is used for VBUS sensing. 15Kohm pull-down - * resistors are always active - */ -#if CFG_TUSB_RHPORT0_MODE - Chip_USB0_Init(); -#endif - - /* USB1 - * When USB channel #1 is used as USB Host, 15Kohm pull-down resistors are needed on the USB data - * signals. These are activated inside the USB OTG chip (U31), and this has to be done via the I2C - * interface of GPIO52/GPIO53. - * J20 is the connector to use when USB Host is used. In order to provide +5V to the external USB - * device connected to this connector (J20), channel A of U20 must be enabled. It is enabled by default - * since SJ5 is normally connected between pin 1-2. LED34 lights green when +5V is available on J20. - * JP15 shall not be inserted. JP16 has no effect - * - * When USB channel #1 is used as USB Device, a 1.5Kohm pull-up resistor is needed on the USB DP - * data signal. There are two methods to create this. JP15 is inserted and the pull-up resistor is always - * enabled. Alternatively, the pull-up resistor is activated inside the USB OTG chip (U31), and this has to - * be done via the I2C interface of GPIO52/GPIO53. In the latter case, JP15 shall not be inserted. - * J19 is the connector to use when USB Device is used. Normally it should be a USB-B connector for - * creating a USB Device interface, but the mini-AB connector can also be used in this case. The status - * of VBUS can be read via U31. - * JP16 shall not be inserted. - */ -#if CFG_TUSB_RHPORT1_MODE - Chip_USB1_Init(); - -// Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, 5, 6); /* GPIO5[6] = USB1_PWR_EN */ -// Chip_GPIO_SetPinState(LPC_GPIO_PORT, 5, 6, true); /* GPIO5[6] output high */ -#endif -} - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST - tuh_int_handler(0); - #endif - - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - tud_int_handler(0); - #endif -} - -void USB1_IRQHandler(void) -{ - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST - tuh_int_handler(1); - #endif - - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE - tud_int_handler(1); - #endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - Chip_GPIO_SetPinState(LPC_GPIO_PORT, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - //return UART_ReceiveByte(BOARD_UART_PORT); - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - //UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING); - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/tinyusb/hw/bsp/ngx4330/ngx4330.ld b/tinyusb/hw/bsp/ngx4330/ngx4330.ld deleted file mode 100755 index 7bd363f0..00000000 --- a/tinyusb/hw/bsp/ngx4330/ngx4330.ld +++ /dev/null @@ -1,343 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * Copyright (c) 2008-2013 Code Red Technologies Ltd, - * Copyright 2015, 2018-2019 NXP - * (c) NXP Semiconductors 2013-2019 - * Generated linker script file for LPC4330 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v11.0.0 [Build 2516] [2019-06-05] on Sep 9, 2019 12:09:49 PM - */ - -MEMORY -{ - /* Define each memory region */ - RamLoc128 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x20000 /* 128K bytes (alias RAM) */ - RamLoc72 (rwx) : ORIGIN = 0x10080000, LENGTH = 0x12000 /* 72K bytes (alias RAM2) */ - RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ - RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ - RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ - SPIFI (rx) : ORIGIN = 0x14000000, LENGTH = 0x400000 /* 4M bytes (alias Flash) */ -} - - /* Define a symbol for the top of each memory region */ - __base_RamLoc128 = 0x10000000 ; /* RamLoc128 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc128 = 0x10000000 + 0x20000 ; /* 128K bytes */ - __top_RAM = 0x10000000 + 0x20000 ; /* 128K bytes */ - __base_RamLoc72 = 0x10080000 ; /* RamLoc72 */ - __base_RAM2 = 0x10080000 ; /* RAM2 */ - __top_RamLoc72 = 0x10080000 + 0x12000 ; /* 72K bytes */ - __top_RAM2 = 0x10080000 + 0x12000 ; /* 72K bytes */ - __base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ - __base_RAM3 = 0x20000000 ; /* RAM3 */ - __top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ - __base_RAM4 = 0x20008000 ; /* RAM4 */ - __top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ - __base_RAM5 = 0x2000c000 ; /* RAM5 */ - __top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - __base_SPIFI = 0x14000000 ; /* SPIFI */ - __base_Flash = 0x14000000 ; /* Flash */ - __top_SPIFI = 0x14000000 + 0x400000 ; /* 4M bytes */ - __top_Flash = 0x14000000 + 0x400000 ; /* 4M bytes */ - -ENTRY(ResetISR) - -SECTIONS -{ - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - LONG(LOADADDR(.data_RAM3)); - LONG( ADDR(.data_RAM3)); - LONG( SIZEOF(.data_RAM3)); - LONG(LOADADDR(.data_RAM4)); - LONG( ADDR(.data_RAM4)); - LONG( SIZEOF(.data_RAM4)); - LONG(LOADADDR(.data_RAM5)); - LONG( ADDR(.data_RAM5)); - LONG( SIZEOF(.data_RAM5)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - LONG( ADDR(.bss_RAM3)); - LONG( SIZEOF(.bss_RAM3)); - LONG( ADDR(.bss_RAM4)); - LONG( SIZEOF(.bss_RAM4)); - LONG( ADDR(.bss_RAM5)); - LONG( SIZEOF(.bss_RAM5)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > SPIFI - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > SPIFI - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > SPIFI - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > SPIFI - __exidx_end = .; - - _etext = .; - - /* DATA section for RamLoc72 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamLoc72) - *(.data.$RAM2) - *(.data.$RamLoc72) - *(.data.$RAM2.*) - *(.data.$RamLoc72.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > RamLoc72 AT>SPIFI - /* DATA section for RamAHB32 */ - - .data_RAM3 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM3 = .) ; - *(.ramfunc.$RAM3) - *(.ramfunc.$RamAHB32) - *(.data.$RAM3) - *(.data.$RamAHB32) - *(.data.$RAM3.*) - *(.data.$RamAHB32.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM3 = .) ; - } > RamAHB32 AT>SPIFI - /* DATA section for RamAHB16 */ - - .data_RAM4 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM4 = .) ; - *(.ramfunc.$RAM4) - *(.ramfunc.$RamAHB16) - *(.data.$RAM4) - *(.data.$RamAHB16) - *(.data.$RAM4.*) - *(.data.$RamAHB16.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM4 = .) ; - } > RamAHB16 AT>SPIFI - /* DATA section for RamAHB_ETB16 */ - - .data_RAM5 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM5 = .) ; - *(.ramfunc.$RAM5) - *(.ramfunc.$RamAHB_ETB16) - *(.data.$RAM5) - *(.data.$RamAHB_ETB16) - *(.data.$RAM5.*) - *(.data.$RamAHB_ETB16.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM5 = .) ; - } > RamAHB_ETB16 AT>SPIFI - /* MAIN DATA SECTION */ - .uninit_RESERVED (NOLOAD) : - { - . = ALIGN(4) ; - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc128 - - /* Main DATA section (RamLoc128) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > RamLoc128 AT>SPIFI - - /* BSS section for RamLoc72 */ - .bss_RAM2 : - { - . = ALIGN(4) ; - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2) - *(.bss.$RamLoc72) - *(.bss.$RAM2.*) - *(.bss.$RamLoc72.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > RamLoc72 - - /* BSS section for RamAHB32 */ - .bss_RAM3 : - { - . = ALIGN(4) ; - PROVIDE(__start_bss_RAM3 = .) ; - *(.bss.$RAM3) - *(.bss.$RamAHB32) - *(.bss.$RAM3.*) - *(.bss.$RamAHB32.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM3 = .) ; - } > RamAHB32 - - /* BSS section for RamAHB16 */ - .bss_RAM4 : - { - . = ALIGN(4) ; - PROVIDE(__start_bss_RAM4 = .) ; - *(.bss.$RAM4) - *(.bss.$RamAHB16) - *(.bss.$RAM4.*) - *(.bss.$RamAHB16.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM4 = .) ; - } > RamAHB16 - - /* BSS section for RamAHB_ETB16 */ - .bss_RAM5 : - { - . = ALIGN(4) ; - PROVIDE(__start_bss_RAM5 = .) ; - *(.bss.$RAM5) - *(.bss.$RamAHB_ETB16) - *(.bss.$RAM5.*) - *(.bss.$RamAHB_ETB16.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM5 = .) ; - } > RamAHB_ETB16 - - /* MAIN BSS SECTION */ - .bss : - { - . = ALIGN(4) ; - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > RamLoc128 - - /* NOINIT section for RamLoc72 */ - .noinit_RAM2 (NOLOAD) : - { - . = ALIGN(4) ; - *(.noinit.$RAM2) - *(.noinit.$RamLoc72) - *(.noinit.$RAM2.*) - *(.noinit.$RamLoc72.*) - . = ALIGN(4) ; - } > RamLoc72 - - /* NOINIT section for RamAHB32 */ - .noinit_RAM3 (NOLOAD) : - { - . = ALIGN(4) ; - *(.noinit.$RAM3) - *(.noinit.$RamAHB32) - *(.noinit.$RAM3.*) - *(.noinit.$RamAHB32.*) - . = ALIGN(4) ; - } > RamAHB32 - - /* NOINIT section for RamAHB16 */ - .noinit_RAM4 (NOLOAD) : - { - . = ALIGN(4) ; - *(.noinit.$RAM4) - *(.noinit.$RamAHB16) - *(.noinit.$RAM4.*) - *(.noinit.$RamAHB16.*) - . = ALIGN(4) ; - } > RamAHB16 - - /* NOINIT section for RamAHB_ETB16 */ - .noinit_RAM5 (NOLOAD) : - { - . = ALIGN(4) ; - *(.noinit.$RAM5) - *(.noinit.$RamAHB_ETB16) - *(.noinit.$RAM5.*) - *(.noinit.$RamAHB_ETB16.*) - . = ALIGN(4) ; - } > RamAHB_ETB16 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): - { - . = ALIGN(4) ; - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > RamLoc128 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc128 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/nrf/boards/adafruit_clue/board.h b/tinyusb/hw/bsp/nrf/boards/adafruit_clue/board.h deleted file mode 100755 index 2c58e8fe..00000000 --- a/tinyusb/hw/bsp/nrf/boards/adafruit_clue/board.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define _PINNUM(port, pin) ((port)*32 + (pin)) - -// LED -#define LED_PIN _PINNUM(1, 1) -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN _PINNUM(1, 02) -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 4 -#define UART_TX_PIN 5 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/adafruit_clue/board.mk b/tinyusb/hw/bsp/nrf/boards/adafruit_clue/board.mk deleted file mode 100755 index f31899eb..00000000 --- a/tinyusb/hw/bsp/nrf/boards/adafruit_clue/board.mk +++ /dev/null @@ -1,10 +0,0 @@ -MCU_VARIANT = nrf52840 -CFLAGS += -DNRF52840_XXAA - -$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex - adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@ - -# flash using adafruit-nrfutil dfu -flash: $(BUILD)/$(PROJECT).zip - @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) - adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200 diff --git a/tinyusb/hw/bsp/nrf/boards/adafruit_clue/nrf52840_s140_v6.ld b/tinyusb/hw/bsp/nrf/boards/adafruit_clue/nrf52840_s140_v6.ld deleted file mode 100755 index 5314a4e9..00000000 --- a/tinyusb/hw/bsp/nrf/boards/adafruit_clue/nrf52840_s140_v6.ld +++ /dev/null @@ -1,38 +0,0 @@ -/* Linker script to configure memory regions. */ - -SEARCH_DIR(.) -GROUP(-lgcc -lc -lnosys) - -MEMORY -{ - FLASH (rx) : ORIGIN = 0x26000, LENGTH = 0xED000 - 0x26000 - - /* SRAM required by S132 depend on - * - Attribute Table Size - * - Vendor UUID count - * - Max ATT MTU - * - Concurrent connection peripheral + central + secure links - * - Event Len, HVN queue, Write CMD queue - */ - RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 -} - -SECTIONS -{ - . = ALIGN(4); - .svc_data : - { - PROVIDE(__start_svc_data = .); - KEEP(*(.svc_data)) - PROVIDE(__stop_svc_data = .); - } > RAM - - .fs_data : - { - PROVIDE(__start_fs_data = .); - KEEP(*(.fs_data)) - PROVIDE(__stop_fs_data = .); - } > RAM -} INSERT AFTER .data; - -INCLUDE "nrf52_common.ld" diff --git a/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/arduino_nano33_ble.ld b/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/arduino_nano33_ble.ld deleted file mode 100755 index f570740b..00000000 --- a/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/arduino_nano33_ble.ld +++ /dev/null @@ -1,32 +0,0 @@ -/* Linker script to configure memory regions. */ - -SEARCH_DIR(.) -GROUP(-lgcc -lc -lnosys) - -MEMORY -{ - FLASH (rx) : ORIGIN = 0x10000, LENGTH = 0xf0000 - RAM_NVIC (rwx) : ORIGIN = 0x20000000, LENGTH = 0x100 - RAM_CRASH_DATA (rwx) : ORIGIN = (0x20000000 + 0x100), LENGTH = 0x100 - RAM (rwx) : ORIGIN = ((0x20000000 + 0x100) + 0x100), LENGTH = (0x40000 - (0x100 + 0x100)) -} - -SECTIONS -{ - . = ALIGN(4); - .svc_data : - { - PROVIDE(__start_svc_data = .); - KEEP(*(.svc_data)) - PROVIDE(__stop_svc_data = .); - } > RAM - - .fs_data : - { - PROVIDE(__start_fs_data = .); - KEEP(*(.fs_data)) - PROVIDE(__stop_fs_data = .); - } > RAM -} INSERT AFTER .data; - -INCLUDE "nrf52_common.ld" diff --git a/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/board.h b/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/board.h deleted file mode 100755 index d548e01c..00000000 --- a/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/board.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define _PINNUM(port, pin) ((port)*32 + (pin)) - -// LED -#define LED_PIN _PINNUM(0, 24) -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PIN _PINNUM(1, 11) // D2 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN _PINNUM(1, 10) -#define UART_TX_PIN _PINNUM(1, 3) - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/board.mk b/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/board.mk deleted file mode 100755 index 94babd82..00000000 --- a/tinyusb/hw/bsp/nrf/boards/arduino_nano33_ble/board.mk +++ /dev/null @@ -1,13 +0,0 @@ -MCU_VARIANT = nrf52840 -CFLAGS += -DNRF52840_XXAA - -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# flash using bossac (as part of Nano33 BSP tools) -# can be found in arduino15/packages/arduino/tools/bossac/ -# Add it to your PATH or change BOSSAC variable to match your installation -BOSSAC = bossac - -flash: $(BUILD)/$(PROJECT).bin - @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) - $(BOSSAC) --port=$(SERIAL) -U -i -e -w $^ -R diff --git a/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h b/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h deleted file mode 100755 index a86c9dc7..00000000 --- a/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define _PINNUM(port, pin) ((port)*32 + (pin)) - -// LED -#define LED_PIN _PINNUM(1, 14) -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN _PINNUM(1, 15) -#define BUTTON_STATE_ACTIVE 1 - -// UART -#define UART_RX_PIN 30 -#define UART_TX_PIN 14 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.mk b/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.mk deleted file mode 100755 index f31899eb..00000000 --- a/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.mk +++ /dev/null @@ -1,10 +0,0 @@ -MCU_VARIANT = nrf52840 -CFLAGS += -DNRF52840_XXAA - -$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex - adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@ - -# flash using adafruit-nrfutil dfu -flash: $(BUILD)/$(PROJECT).zip - @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) - adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200 diff --git a/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/nrf52840_s140_v6.ld b/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/nrf52840_s140_v6.ld deleted file mode 100755 index 5314a4e9..00000000 --- a/tinyusb/hw/bsp/nrf/boards/circuitplayground_bluefruit/nrf52840_s140_v6.ld +++ /dev/null @@ -1,38 +0,0 @@ -/* Linker script to configure memory regions. */ - -SEARCH_DIR(.) -GROUP(-lgcc -lc -lnosys) - -MEMORY -{ - FLASH (rx) : ORIGIN = 0x26000, LENGTH = 0xED000 - 0x26000 - - /* SRAM required by S132 depend on - * - Attribute Table Size - * - Vendor UUID count - * - Max ATT MTU - * - Concurrent connection peripheral + central + secure links - * - Event Len, HVN queue, Write CMD queue - */ - RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 -} - -SECTIONS -{ - . = ALIGN(4); - .svc_data : - { - PROVIDE(__start_svc_data = .); - KEEP(*(.svc_data)) - PROVIDE(__stop_svc_data = .); - } > RAM - - .fs_data : - { - PROVIDE(__start_fs_data = .); - KEEP(*(.fs_data)) - PROVIDE(__stop_fs_data = .); - } > RAM -} INSERT AFTER .data; - -INCLUDE "nrf52_common.ld" diff --git a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/board.h b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/board.h deleted file mode 100755 index 3208a948..00000000 --- a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/board.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define _PINNUM(port, pin) ((port)*32 + (pin)) - -// LED -#define LED_PIN _PINNUM(1, 15) -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN _PINNUM(1, 02) -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 24 -#define UART_TX_PIN 25 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/board.mk b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/board.mk deleted file mode 100755 index f31899eb..00000000 --- a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/board.mk +++ /dev/null @@ -1,10 +0,0 @@ -MCU_VARIANT = nrf52840 -CFLAGS += -DNRF52840_XXAA - -$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex - adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@ - -# flash using adafruit-nrfutil dfu -flash: $(BUILD)/$(PROJECT).zip - @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) - adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200 diff --git a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld deleted file mode 100755 index 5314a4e9..00000000 --- a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld +++ /dev/null @@ -1,38 +0,0 @@ -/* Linker script to configure memory regions. */ - -SEARCH_DIR(.) -GROUP(-lgcc -lc -lnosys) - -MEMORY -{ - FLASH (rx) : ORIGIN = 0x26000, LENGTH = 0xED000 - 0x26000 - - /* SRAM required by S132 depend on - * - Attribute Table Size - * - Vendor UUID count - * - Max ATT MTU - * - Concurrent connection peripheral + central + secure links - * - Event Len, HVN queue, Write CMD queue - */ - RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 -} - -SECTIONS -{ - . = ALIGN(4); - .svc_data : - { - PROVIDE(__start_svc_data = .); - KEEP(*(.svc_data)) - PROVIDE(__stop_svc_data = .); - } > RAM - - .fs_data : - { - PROVIDE(__start_fs_data = .); - KEEP(*(.fs_data)) - PROVIDE(__stop_fs_data = .); - } > RAM -} INSERT AFTER .data; - -INCLUDE "nrf52_common.ld" diff --git a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h deleted file mode 100755 index ece6e34c..00000000 --- a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define _PINNUM(port, pin) ((port)*32 + (pin)) - -// LED -#define LED_PIN _PINNUM(1, 9) -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN _PINNUM(1, 02) -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 24 -#define UART_TX_PIN 25 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/board.mk b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/board.mk deleted file mode 100755 index f31899eb..00000000 --- a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/board.mk +++ /dev/null @@ -1,10 +0,0 @@ -MCU_VARIANT = nrf52840 -CFLAGS += -DNRF52840_XXAA - -$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex - adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@ - -# flash using adafruit-nrfutil dfu -flash: $(BUILD)/$(PROJECT).zip - @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) - adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200 diff --git a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/nrf52840_s140_v6.ld b/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/nrf52840_s140_v6.ld deleted file mode 100755 index 5314a4e9..00000000 --- a/tinyusb/hw/bsp/nrf/boards/feather_nrf52840_sense/nrf52840_s140_v6.ld +++ /dev/null @@ -1,38 +0,0 @@ -/* Linker script to configure memory regions. */ - -SEARCH_DIR(.) -GROUP(-lgcc -lc -lnosys) - -MEMORY -{ - FLASH (rx) : ORIGIN = 0x26000, LENGTH = 0xED000 - 0x26000 - - /* SRAM required by S132 depend on - * - Attribute Table Size - * - Vendor UUID count - * - Max ATT MTU - * - Concurrent connection peripheral + central + secure links - * - Event Len, HVN queue, Write CMD queue - */ - RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 -} - -SECTIONS -{ - . = ALIGN(4); - .svc_data : - { - PROVIDE(__start_svc_data = .); - KEEP(*(.svc_data)) - PROVIDE(__stop_svc_data = .); - } > RAM - - .fs_data : - { - PROVIDE(__start_fs_data = .); - KEEP(*(.fs_data)) - PROVIDE(__stop_fs_data = .); - } > RAM -} INSERT AFTER .data; - -INCLUDE "nrf52_common.ld" diff --git a/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h b/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h deleted file mode 100755 index 132173a8..00000000 --- a/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define _PINNUM(port, pin) ((port)*32 + (pin)) - -// LED -#define LED_PIN _PINNUM(0, 6) -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN _PINNUM(0, 29) -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 25 -#define UART_TX_PIN 24 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.mk b/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.mk deleted file mode 100755 index f31899eb..00000000 --- a/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.mk +++ /dev/null @@ -1,10 +0,0 @@ -MCU_VARIANT = nrf52840 -CFLAGS += -DNRF52840_XXAA - -$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex - adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@ - -# flash using adafruit-nrfutil dfu -flash: $(BUILD)/$(PROJECT).zip - @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) - adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200 diff --git a/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld b/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld deleted file mode 100755 index 5314a4e9..00000000 --- a/tinyusb/hw/bsp/nrf/boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld +++ /dev/null @@ -1,38 +0,0 @@ -/* Linker script to configure memory regions. */ - -SEARCH_DIR(.) -GROUP(-lgcc -lc -lnosys) - -MEMORY -{ - FLASH (rx) : ORIGIN = 0x26000, LENGTH = 0xED000 - 0x26000 - - /* SRAM required by S132 depend on - * - Attribute Table Size - * - Vendor UUID count - * - Max ATT MTU - * - Concurrent connection peripheral + central + secure links - * - Event Len, HVN queue, Write CMD queue - */ - RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 -} - -SECTIONS -{ - . = ALIGN(4); - .svc_data : - { - PROVIDE(__start_svc_data = .); - KEEP(*(.svc_data)) - PROVIDE(__stop_svc_data = .); - } > RAM - - .fs_data : - { - PROVIDE(__start_fs_data = .); - KEEP(*(.fs_data)) - PROVIDE(__stop_fs_data = .); - } > RAM -} INSERT AFTER .data; - -INCLUDE "nrf52_common.ld" diff --git a/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h b/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h deleted file mode 100755 index 01dd1f24..00000000 --- a/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define _PINNUM(port, pin) ((port)*32 + (pin)) - -// LED -#define LED_PIN _PINNUM(0, 23) -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PIN _PINNUM(0, 18) -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 2 -#define UART_TX_PIN 3 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk b/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk deleted file mode 100755 index 3afa234a..00000000 --- a/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk +++ /dev/null @@ -1,15 +0,0 @@ -MCU_VARIANT = nrf52840 -CFLAGS += -DNRF52840_XXAA - -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# flash using Nordic nrfutil (pip3 install nrfutil) -# make BOARD=nrf52840_mdk_dongle SERIAL=/dev/ttyACM0 all flash -NRFUTIL = nrfutil - -$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex - $(NRFUTIL) pkg generate --hw-version 52 --sd-req 0x0000 --debug-mode --application $^ $@ - -flash: $(BUILD)/$(PROJECT).zip - @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) - $(NRFUTIL) dfu usb-serial --package $^ -p $(SERIAL) -b 115200
\ No newline at end of file diff --git a/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/nrf52840_mdk_dongle.ld b/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/nrf52840_mdk_dongle.ld deleted file mode 100755 index 78eddc9c..00000000 --- a/tinyusb/hw/bsp/nrf/boards/nrf52840_mdk_dongle/nrf52840_mdk_dongle.ld +++ /dev/null @@ -1,13 +0,0 @@ -/* Linker script to configure memory regions. */ - -SEARCH_DIR(.) -GROUP(-lgcc -lc -lnosys) - -MEMORY -{ - FLASH (rx) : ORIGIN = 0x1000, LENGTH = 0xE0000-0x1000 - RAM (rwx) : ORIGIN = 0x20000008, LENGTH = 0x3fff8 -} - - -INCLUDE "nrf_common.ld" diff --git a/tinyusb/hw/bsp/nrf/boards/pca10056/board.h b/tinyusb/hw/bsp/nrf/boards/pca10056/board.h deleted file mode 100755 index ab12d21a..00000000 --- a/tinyusb/hw/bsp/nrf/boards/pca10056/board.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN 13 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PIN 11 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 8 -#define UART_TX_PIN 6 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/pca10056/board.mk b/tinyusb/hw/bsp/nrf/boards/pca10056/board.mk deleted file mode 100755 index be2ed331..00000000 --- a/tinyusb/hw/bsp/nrf/boards/pca10056/board.mk +++ /dev/null @@ -1,7 +0,0 @@ -MCU_VARIANT = nrf52840 -CFLAGS += -DNRF52840_XXAA - -LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52840_xxaa.ld - -# flash using jlink -flash: flash-jlink diff --git a/tinyusb/hw/bsp/nrf/boards/pca10059/board.h b/tinyusb/hw/bsp/nrf/boards/pca10059/board.h deleted file mode 100755 index 0810be64..00000000 --- a/tinyusb/hw/bsp/nrf/boards/pca10059/board.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define _PINNUM(port, pin) ((port)*32 + (pin)) - -// LED -#define LED_PIN 8 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PIN _PINNUM(1, 6) -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 8 -#define UART_TX_PIN 6 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/pca10059/board.mk b/tinyusb/hw/bsp/nrf/boards/pca10059/board.mk deleted file mode 100755 index 0b82ecdb..00000000 --- a/tinyusb/hw/bsp/nrf/boards/pca10059/board.mk +++ /dev/null @@ -1,15 +0,0 @@ -MCU_VARIANT = nrf52840 -CFLAGS += -DNRF52840_XXAA - -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# flash using Nordic nrfutil (pip2 install nrfutil) -# make BOARD=pca10059 SERIAL=/dev/ttyACM0 all flash -NRFUTIL = nrfutil - -$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex - $(NRFUTIL) pkg generate --hw-version 52 --sd-req 0x0000 --debug-mode --application $^ $@ - -flash: $(BUILD)/$(PROJECT).zip - @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) - $(NRFUTIL) dfu usb-serial --package $^ -p $(SERIAL) -b 115200 diff --git a/tinyusb/hw/bsp/nrf/boards/pca10059/pca10059.ld b/tinyusb/hw/bsp/nrf/boards/pca10059/pca10059.ld deleted file mode 100755 index 510bfdd8..00000000 --- a/tinyusb/hw/bsp/nrf/boards/pca10059/pca10059.ld +++ /dev/null @@ -1,13 +0,0 @@ -/* Linker script to configure memory regions. */ - -SEARCH_DIR(.) -GROUP(-lgcc -lc -lnosys) - -MEMORY -{ - FLASH (rx) : ORIGIN = 0x1000, LENGTH = 0xff000 - RAM (rwx) : ORIGIN = 0x20000008, LENGTH = 0x3fff8 -} - - -INCLUDE "nrf_common.ld" diff --git a/tinyusb/hw/bsp/nrf/boards/pca10100/board.h b/tinyusb/hw/bsp/nrf/boards/pca10100/board.h deleted file mode 100755 index 88113303..00000000 --- a/tinyusb/hw/bsp/nrf/boards/pca10100/board.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define _PINNUM(port, pin) ((port)*32 + (pin)) - -// LED -#define LED_PIN 13 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PIN 11 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 8 -#define UART_TX_PIN 6 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/pca10100/board.mk b/tinyusb/hw/bsp/nrf/boards/pca10100/board.mk deleted file mode 100755 index 5fba269b..00000000 --- a/tinyusb/hw/bsp/nrf/boards/pca10100/board.mk +++ /dev/null @@ -1,7 +0,0 @@ -MCU_VARIANT = nrf52833 -CFLAGS += -DNRF52833_XXAA - -LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52833_xxaa.ld - -# flash using jlink -flash: flash-jlink diff --git a/tinyusb/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h b/tinyusb/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h deleted file mode 100755 index dcf829d9..00000000 --- a/tinyusb/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define _PINNUM(port, pin) ((port)*32 + (pin)) - -// LED -#define LED_PIN _PINNUM(1, 13) -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PIN _PINNUM(0, 15) -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 25 -#define UART_TX_PIN 24 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.mk b/tinyusb/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.mk deleted file mode 100755 index be2ed331..00000000 --- a/tinyusb/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.mk +++ /dev/null @@ -1,7 +0,0 @@ -MCU_VARIANT = nrf52840 -CFLAGS += -DNRF52840_XXAA - -LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52840_xxaa.ld - -# flash using jlink -flash: flash-jlink diff --git a/tinyusb/hw/bsp/nrf/family.c b/tinyusb/hw/bsp/nrf/family.c deleted file mode 100755 index ed742daa..00000000 --- a/tinyusb/hw/bsp/nrf/family.c +++ /dev/null @@ -1,224 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board.h" -#include "board.h" - -#include "nrfx.h" -#include "nrfx/hal/nrf_gpio.h" -#include "nrfx/drivers/include/nrfx_power.h" -#include "nrfx/drivers/include/nrfx_uarte.h" - -#ifdef SOFTDEVICE_PRESENT -#include "nrf_sdm.h" -#include "nrf_soc.h" -#endif - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USBD_IRQHandler(void) -{ - tud_int_handler(0); -} - -/*------------------------------------------------------------------*/ -/* MACRO TYPEDEF CONSTANT ENUM - *------------------------------------------------------------------*/ - -static nrfx_uarte_t _uart_id = NRFX_UARTE_INSTANCE(0); - -// tinyusb function that handles power event (detected, ready, removed) -// We must call it within SD's SOC event handler, or set it as power event handler if SD is not enabled. -extern void tusb_hal_nrf_power_event(uint32_t event); - - -// nrf power callback, could be unused if SD is enabled or usb is disabled (board_test example) -TU_ATTR_UNUSED static void power_event_handler(nrfx_power_usb_evt_t event) -{ - tusb_hal_nrf_power_event((uint32_t) event); -} - -void board_init(void) -{ - // stop LF clock just in case we jump from application without reset - NRF_CLOCK->TASKS_LFCLKSTOP = 1UL; - - // Use Internal OSC to compatible with all boards - NRF_CLOCK->LFCLKSRC = CLOCK_LFCLKSRC_SRC_RC; - NRF_CLOCK->TASKS_LFCLKSTART = 1UL; - - // LED - nrf_gpio_cfg_output(LED_PIN); - board_led_write(false); - - // Button - nrf_gpio_cfg_input(BUTTON_PIN, NRF_GPIO_PIN_PULLUP); - - // 1ms tick timer - SysTick_Config(SystemCoreClock/1000); - - // UART - nrfx_uarte_config_t uart_cfg = - { - .pseltxd = UART_TX_PIN, - .pselrxd = UART_RX_PIN, - .pselcts = NRF_UARTE_PSEL_DISCONNECTED, - .pselrts = NRF_UARTE_PSEL_DISCONNECTED, - .p_context = NULL, - .baudrate = NRF_UARTE_BAUDRATE_115200, // CFG_BOARD_UART_BAUDRATE - .interrupt_priority = 7, - .hal_cfg = { - .hwfc = NRF_UARTE_HWFC_DISABLED, - .parity = NRF_UARTE_PARITY_EXCLUDED, - } - }; - - nrfx_uarte_init(&_uart_id, &uart_cfg, NULL); //uart_handler); - - //------------- USB -------------// -#if TUSB_OPT_DEVICE_ENABLED - // Priorities 0, 1, 4 (nRF52) are reserved for SoftDevice - // 2 is highest for application - NVIC_SetPriority(USBD_IRQn, 2); - - // USB power may already be ready at this time -> no event generated - // We need to invoke the handler based on the status initially - uint32_t usb_reg; - -#ifdef SOFTDEVICE_PRESENT - uint8_t sd_en = false; - sd_softdevice_is_enabled(&sd_en); - - if ( sd_en ) { - sd_power_usbdetected_enable(true); - sd_power_usbpwrrdy_enable(true); - sd_power_usbremoved_enable(true); - - sd_power_usbregstatus_get(&usb_reg); - }else -#endif - { - // Power module init - const nrfx_power_config_t pwr_cfg = { 0 }; - nrfx_power_init(&pwr_cfg); - - // Register tusb function as USB power handler - // cause cast-function-type warning - const nrfx_power_usbevt_config_t config = { .handler = power_event_handler }; - nrfx_power_usbevt_init(&config); - - nrfx_power_usbevt_enable(); - - usb_reg = NRF_POWER->USBREGSTATUS; - } - - if ( usb_reg & POWER_USBREGSTATUS_VBUSDETECT_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_DETECTED); - if ( usb_reg & POWER_USBREGSTATUS_OUTPUTRDY_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_READY); -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - nrf_gpio_pin_write(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == nrf_gpio_pin_read(BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -// return NRFX_SUCCESS == nrfx_uart_rx(&_uart_id, buf, (size_t) len) ? len : 0; -} - -int board_uart_write(void const * buf, int len) -{ - return (NRFX_SUCCESS == nrfx_uarte_tx(&_uart_id, (uint8_t const*) buf, (size_t) len)) ? len : 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -#ifdef SOFTDEVICE_PRESENT -// process SOC event from SD -uint32_t proc_soc(void) -{ - uint32_t soc_evt; - uint32_t err = sd_evt_get(&soc_evt); - - if (NRF_SUCCESS == err) - { - /*------------- usb power event handler -------------*/ - int32_t usbevt = (soc_evt == NRF_EVT_POWER_USB_DETECTED ) ? NRFX_POWER_USB_EVT_DETECTED: - (soc_evt == NRF_EVT_POWER_USB_POWER_READY) ? NRFX_POWER_USB_EVT_READY : - (soc_evt == NRF_EVT_POWER_USB_REMOVED ) ? NRFX_POWER_USB_EVT_REMOVED : -1; - - if ( usbevt >= 0) tusb_hal_nrf_power_event(usbevt); - } - - return err; -} - -uint32_t proc_ble(void) -{ - // do nothing with ble - return NRF_ERROR_NOT_FOUND; -} - -void SD_EVT_IRQHandler(void) -{ - // process BLE and SOC until there is no more events - while( (NRF_ERROR_NOT_FOUND != proc_ble()) || (NRF_ERROR_NOT_FOUND != proc_soc()) ) - { - - } -} - -void nrf_error_cb(uint32_t id, uint32_t pc, uint32_t info) -{ - (void) id; - (void) pc; - (void) info; -} -#endif diff --git a/tinyusb/hw/bsp/nrf/family.mk b/tinyusb/hw/bsp/nrf/family.mk deleted file mode 100755 index d1afd258..00000000 --- a/tinyusb/hw/bsp/nrf/family.mk +++ /dev/null @@ -1,60 +0,0 @@ -UF2_FAMILY_ID = 0xADA52840 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/nordic/nrfx - -include $(TOP)/$(BOARD_PATH)/board.mk - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -DCFG_TUSB_MCU=OPT_MCU_NRF5X \ - -DCONFIG_GPIO_AS_PINRESET - -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align - -# due to tusb_hal_nrf_power_event -GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion))) -ifeq ($(CMDEXE),1) - ifeq ($(shell if $(GCCVERSION) geq 8 echo 1), 1) - CFLAGS += -Wno-error=cast-function-type - endif -else - ifeq ($(shell expr $(GCCVERSION) \>= 8), 1) - CFLAGS += -Wno-error=cast-function-type - endif -endif - -# All source paths should be relative to the top level. -LD_FILE ?= hw/bsp/nrf/boards/$(BOARD)/nrf52840_s140_v6.ld - -LDFLAGS += -L$(TOP)/hw/mcu/nordic/nrfx/mdk - -SRC_C += \ - src/portable/nordic/nrf5x/dcd_nrf5x.c \ - hw/mcu/nordic/nrfx/drivers/src/nrfx_power.c \ - hw/mcu/nordic/nrfx/drivers/src/nrfx_uarte.c \ - hw/mcu/nordic/nrfx/mdk/system_$(MCU_VARIANT).c - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/hw/mcu/nordic \ - $(TOP)/hw/mcu/nordic/nrfx \ - $(TOP)/hw/mcu/nordic/nrfx/mdk \ - $(TOP)/hw/mcu/nordic/nrfx/hal \ - $(TOP)/hw/mcu/nordic/nrfx/drivers/include \ - $(TOP)/hw/mcu/nordic/nrfx/drivers/src \ - -SRC_S += hw/mcu/nordic/nrfx/mdk/gcc_startup_$(MCU_VARIANT).S - -ASFLAGS += -D__HEAP_SIZE=0 - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = $(MCU_VARIANT)_xxaa diff --git a/tinyusb/hw/bsp/nutiny_nuc121s/board.mk b/tinyusb/hw/bsp/nutiny_nuc121s/board.mk deleted file mode 100755 index a0a208ca..00000000 --- a/tinyusb/hw/bsp/nutiny_nuc121s/board.mk +++ /dev/null @@ -1,55 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nuvoton - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs-linux \ - -mcpu=cortex-m0 \ - -D__ARM_FEATURE_DSP=0 \ - -DUSE_ASSERT=0 \ - -DCFG_EXAMPLE_MSC_READONLY \ - -DCFG_TUSB_MCU=OPT_MCU_NUC121 - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/nuc121_flash.ld - -SRC_C += \ - src/portable/nuvoton/nuc121/dcd_nuc121.c \ - hw/mcu/nuvoton/nuc121_125/Device/Nuvoton/NUC121/Source/system_NUC121.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/adc.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/bpwm.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/clk.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/fmc.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/gpio.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/i2c.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/pdma.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/pwm.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/spi_i2s.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/sys.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/timer.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/uart.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/usbd.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/usci_i2c.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/usci_spi.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/usci_uart.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/wdt.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/wwdt.c - -SRC_S += \ - hw/mcu/nuvoton/nuc121_125/Device/Nuvoton/NUC121/Source/GCC/startup_NUC121.S - -INC += \ - $(TOP)/hw/mcu/nuvoton/nuc121_125/Device/Nuvoton/NUC121/Include \ - $(TOP)/hw/mcu/nuvoton/nuc121_125/StdDriver/inc \ - $(TOP)/hw/mcu/nuvoton/nuc121_125/CMSIS/Include - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = NUC121SC2AE - -# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton -# Please compile and install it from github source -flash: $(BUILD)/$(PROJECT).elf - openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit" diff --git a/tinyusb/hw/bsp/nutiny_nuc121s/nuc121_flash.ld b/tinyusb/hw/bsp/nutiny_nuc121s/nuc121_flash.ld deleted file mode 100755 index 3966b276..00000000 --- a/tinyusb/hw/bsp/nutiny_nuc121s/nuc121_flash.ld +++ /dev/null @@ -1,195 +0,0 @@ -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x8000 /* 32k */ - RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x2000 /* 8k */ -} - -/* Library configurations */ -GROUP(libgcc.a libc.a libm.a libnosys.a) - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __copy_table_start__ - * __copy_table_end__ - * __zero_table_start__ - * __zero_table_end__ - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - * __Vectors_End - * __Vectors_Size - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - KEEP(*(.vectors)) - __Vectors_End = .; - __Vectors_Size = __Vectors_End - __Vectors; - __end__ = .; - - *(.text*) - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - /* To copy multiple ROM to RAM sections, - * uncomment .copy.table section and, - * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ - /* - .copy.table : - { - . = ALIGN(4); - __copy_table_start__ = .; - LONG (__etext) - LONG (__data_start__) - LONG (__data_end__ - __data_start__) - LONG (__etext2) - LONG (__data2_start__) - LONG (__data2_end__ - __data2_start__) - __copy_table_end__ = .; - } > FLASH - */ - - /* To clear multiple BSS sections, - * uncomment .zero.table section and, - * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ - /* - .zero.table : - { - . = ALIGN(4); - __zero_table_start__ = .; - LONG (__bss_start__) - LONG (__bss_end__ - __bss_start__) - LONG (__bss2_start__) - LONG (__bss2_end__ - __bss2_start__) - __zero_table_end__ = .; - } > FLASH - */ - - __etext = .; - - .data : AT (__etext) - { - __data_start__ = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - } > RAM - - .heap (COPY): - { - __HeapBase = .; - __end__ = .; - end = __end__; - KEEP(*(.heap*)) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - KEEP(*(.stack*)) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -} diff --git a/tinyusb/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c b/tinyusb/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c deleted file mode 100755 index 7117a342..00000000 --- a/tinyusb/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board.h" -#include "NuMicro.h" -#include "clk.h" -#include "sys.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USBD_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT PB -#define LED_PIN 4 -#define LED_PIN_IO PB4 -#define LED_STATE_ON 0 - -void board_init(void) -{ - /* Unlock protected registers */ - SYS_UnlockReg(); - - /*---------------------------------------------------------------------------------------------------------*/ - /* Init System Clock */ - /*---------------------------------------------------------------------------------------------------------*/ - - /* Enable Internal HIRC 48 MHz clock */ - CLK_EnableXtalRC(CLK_PWRCTL_HIRCEN); - - /* Waiting for Internal RC clock ready */ - CLK_WaitClockReady(CLK_STATUS_HIRCSTB_Msk); - - /* Switch HCLK clock source to Internal HIRC and HCLK source divide 1 */ - CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_HIRC, CLK_CLKDIV0_HCLK(1)); - - /* Enable module clock */ - CLK_EnableModuleClock(USBD_MODULE); - - /* Select module clock source */ - CLK_SetModuleClock(USBD_MODULE, CLK_CLKSEL3_USBDSEL_HIRC, CLK_CLKDIV0_USB(1)); - - /* Enable module clock */ - CLK_EnableModuleClock(USBD_MODULE); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(48000000 / 1000); -#endif - - // LED - GPIO_SetMode(LED_PORT, 1 << LED_PIN, GPIO_MODE_OUTPUT); -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - LED_PIN_IO = (state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} diff --git a/tinyusb/hw/bsp/nutiny_nuc125s/board.mk b/tinyusb/hw/bsp/nutiny_nuc125s/board.mk deleted file mode 100755 index bb56e42a..00000000 --- a/tinyusb/hw/bsp/nutiny_nuc125s/board.mk +++ /dev/null @@ -1,39 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nuvoton - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs-linux \ - -mcpu=cortex-m0 \ - -D__ARM_FEATURE_DSP=0 \ - -DUSE_ASSERT=0 \ - -DCFG_EXAMPLE_MSC_READONLY \ - -DCFG_TUSB_MCU=OPT_MCU_NUC121 - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/nuc125_flash.ld - -SRC_C += \ - src/portable/nuvoton/nuc121/dcd_nuc121.c \ - hw/mcu/nuvoton/nuc121_125/Device/Nuvoton/NUC121/Source/system_NUC121.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/clk.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/gpio.c - -SRC_S += \ - hw/mcu/nuvoton/nuc121_125/Device/Nuvoton/NUC121/Source/GCC/startup_NUC121.S - -INC += \ - $(TOP)/hw/mcu/nuvoton/nuc121_125/Device/Nuvoton/NUC121/Include \ - $(TOP)/hw/mcu/nuvoton/nuc121_125/StdDriver/inc \ - $(TOP)/hw/mcu/nuvoton/nuc121_125/CMSIS/Include - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = NUC125SC2AE - -# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton -# Please compile and install it from github source -flash: $(BUILD)/$(PROJECT).elf - openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit" diff --git a/tinyusb/hw/bsp/nutiny_nuc125s/nuc125_flash.ld b/tinyusb/hw/bsp/nutiny_nuc125s/nuc125_flash.ld deleted file mode 100755 index 3966b276..00000000 --- a/tinyusb/hw/bsp/nutiny_nuc125s/nuc125_flash.ld +++ /dev/null @@ -1,195 +0,0 @@ -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x8000 /* 32k */ - RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x2000 /* 8k */ -} - -/* Library configurations */ -GROUP(libgcc.a libc.a libm.a libnosys.a) - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __copy_table_start__ - * __copy_table_end__ - * __zero_table_start__ - * __zero_table_end__ - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - * __Vectors_End - * __Vectors_Size - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - KEEP(*(.vectors)) - __Vectors_End = .; - __Vectors_Size = __Vectors_End - __Vectors; - __end__ = .; - - *(.text*) - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - /* To copy multiple ROM to RAM sections, - * uncomment .copy.table section and, - * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ - /* - .copy.table : - { - . = ALIGN(4); - __copy_table_start__ = .; - LONG (__etext) - LONG (__data_start__) - LONG (__data_end__ - __data_start__) - LONG (__etext2) - LONG (__data2_start__) - LONG (__data2_end__ - __data2_start__) - __copy_table_end__ = .; - } > FLASH - */ - - /* To clear multiple BSS sections, - * uncomment .zero.table section and, - * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ - /* - .zero.table : - { - . = ALIGN(4); - __zero_table_start__ = .; - LONG (__bss_start__) - LONG (__bss_end__ - __bss_start__) - LONG (__bss2_start__) - LONG (__bss2_end__ - __bss2_start__) - __zero_table_end__ = .; - } > FLASH - */ - - __etext = .; - - .data : AT (__etext) - { - __data_start__ = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - } > RAM - - .heap (COPY): - { - __HeapBase = .; - __end__ = .; - end = __end__; - KEEP(*(.heap*)) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - KEEP(*(.stack*)) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -} diff --git a/tinyusb/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c b/tinyusb/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c deleted file mode 100755 index 7117a342..00000000 --- a/tinyusb/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board.h" -#include "NuMicro.h" -#include "clk.h" -#include "sys.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USBD_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT PB -#define LED_PIN 4 -#define LED_PIN_IO PB4 -#define LED_STATE_ON 0 - -void board_init(void) -{ - /* Unlock protected registers */ - SYS_UnlockReg(); - - /*---------------------------------------------------------------------------------------------------------*/ - /* Init System Clock */ - /*---------------------------------------------------------------------------------------------------------*/ - - /* Enable Internal HIRC 48 MHz clock */ - CLK_EnableXtalRC(CLK_PWRCTL_HIRCEN); - - /* Waiting for Internal RC clock ready */ - CLK_WaitClockReady(CLK_STATUS_HIRCSTB_Msk); - - /* Switch HCLK clock source to Internal HIRC and HCLK source divide 1 */ - CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_HIRC, CLK_CLKDIV0_HCLK(1)); - - /* Enable module clock */ - CLK_EnableModuleClock(USBD_MODULE); - - /* Select module clock source */ - CLK_SetModuleClock(USBD_MODULE, CLK_CLKSEL3_USBDSEL_HIRC, CLK_CLKDIV0_USB(1)); - - /* Enable module clock */ - CLK_EnableModuleClock(USBD_MODULE); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(48000000 / 1000); -#endif - - // LED - GPIO_SetMode(LED_PORT, 1 << LED_PIN, GPIO_MODE_OUTPUT); -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - LED_PIN_IO = (state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} diff --git a/tinyusb/hw/bsp/nutiny_nuc126v/board.mk b/tinyusb/hw/bsp/nutiny_nuc126v/board.mk deleted file mode 100755 index 848b19f9..00000000 --- a/tinyusb/hw/bsp/nutiny_nuc126v/board.mk +++ /dev/null @@ -1,59 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nuvoton - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs-linux \ - -mcpu=cortex-m0 \ - -D__ARM_FEATURE_DSP=0 \ - -DUSE_ASSERT=0 \ - -D__CORTEX_SC=0 \ - -DCFG_TUSB_MCU=OPT_MCU_NUC126 - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/nuc126_flash.ld - -SRC_C += \ - src/portable/nuvoton/nuc121/dcd_nuc121.c \ - hw/mcu/nuvoton/nuc126/Device/Nuvoton/NUC126/Source/system_NUC126.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/acmp.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/adc.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/clk.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/crc.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/ebi.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/fmc.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/gpio.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/pdma.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/pwm.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/rtc.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/sc.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/scuart.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/spi.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/sys.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/timer.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/timer_pwm.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/uart.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/usbd.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/usci_spi.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/usci_uart.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/wdt.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/wwdt.c - -SRC_S += \ - hw/mcu/nuvoton/nuc126/Device/Nuvoton/NUC126/Source/GCC/startup_NUC126.S - -INC += \ - $(TOP)/hw/mcu/nuvoton/nuc126/Device/Nuvoton/NUC126/Include \ - $(TOP)/hw/mcu/nuvoton/nuc126/StdDriver/inc \ - $(TOP)/hw/mcu/nuvoton/nuc126/CMSIS/Include - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = NUC126VG4AE - -# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton -# Please compile and install it from github source -flash: $(BUILD)/$(PROJECT).elf - openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit" diff --git a/tinyusb/hw/bsp/nutiny_nuc126v/nuc126_flash.ld b/tinyusb/hw/bsp/nutiny_nuc126v/nuc126_flash.ld deleted file mode 100755 index b23890b4..00000000 --- a/tinyusb/hw/bsp/nutiny_nuc126v/nuc126_flash.ld +++ /dev/null @@ -1,195 +0,0 @@ -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x40000 /* 256k */ - RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x5000 /* 20k */ -} - -/* Library configurations */ -GROUP(libgcc.a libc.a libm.a libnosys.a) - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __copy_table_start__ - * __copy_table_end__ - * __zero_table_start__ - * __zero_table_end__ - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - * __Vectors_End - * __Vectors_Size - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - KEEP(*(.vectors)) - __Vectors_End = .; - __Vectors_Size = __Vectors_End - __Vectors; - __end__ = .; - - *(.text*) - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - /* To copy multiple ROM to RAM sections, - * uncomment .copy.table section and, - * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ - /* - .copy.table : - { - . = ALIGN(4); - __copy_table_start__ = .; - LONG (__etext) - LONG (__data_start__) - LONG (__data_end__ - __data_start__) - LONG (__etext2) - LONG (__data2_start__) - LONG (__data2_end__ - __data2_start__) - __copy_table_end__ = .; - } > FLASH - */ - - /* To clear multiple BSS sections, - * uncomment .zero.table section and, - * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ - /* - .zero.table : - { - . = ALIGN(4); - __zero_table_start__ = .; - LONG (__bss_start__) - LONG (__bss_end__ - __bss_start__) - LONG (__bss2_start__) - LONG (__bss2_end__ - __bss2_start__) - __zero_table_end__ = .; - } > FLASH - */ - - __etext = .; - - .data : AT (__etext) - { - __data_start__ = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - } > RAM - - .heap (COPY): - { - __HeapBase = .; - __end__ = .; - end = __end__; - KEEP(*(.heap*)) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - KEEP(*(.stack*)) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -} diff --git a/tinyusb/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c b/tinyusb/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c deleted file mode 100755 index da62e7bd..00000000 --- a/tinyusb/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board.h" -#include "NuMicro.h" -#include "clk.h" -#include "sys.h" - - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USBD_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT PC -#define LED_PIN 9 -#define LED_PIN_IO PC9 -#define LED_STATE_ON 0 - -#define CRYSTAL_LESS /* system will be 48MHz when defined, otherwise, system is 72MHz */ -#define HIRC48_AUTO_TRIM SYS_IRCTCTL1_REFCKSEL_Msk | (1UL << SYS_IRCTCTL1_LOOPSEL_Pos) | (2UL << SYS_IRCTCTL1_FREQSEL_Pos) -#define TRIM_INIT (SYS_BASE+0x118) - -void board_init(void) -{ - /* Unlock protected registers */ - SYS_UnlockReg(); - - /*---------------------------------------------------------------------------------------------------------*/ - /* Init System Clock */ - /*---------------------------------------------------------------------------------------------------------*/ - - /* Enable Internal RC 22.1184 MHz clock */ - CLK_EnableXtalRC(CLK_PWRCTL_HIRCEN_Msk); - - /* Waiting for Internal RC clock ready */ - CLK_WaitClockReady(CLK_STATUS_HIRCSTB_Msk); - - /* Switch HCLK clock source to Internal RC and HCLK source divide 1 */ - CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_HIRC, CLK_CLKDIV0_HCLK(1)); - -#ifndef CRYSTAL_LESS - /* Enable external XTAL 12 MHz clock */ - CLK_EnableXtalRC(CLK_PWRCTL_HXTEN_Msk); - - /* Waiting for external XTAL clock ready */ - CLK_WaitClockReady(CLK_STATUS_HXTSTB_Msk); - - /* Set core clock */ - CLK_SetCoreClock(72000000); - - /* Use HIRC as UART clock source */ - CLK_SetModuleClock(UART0_MODULE, CLK_CLKSEL1_UARTSEL_HIRC, CLK_CLKDIV0_UART(1)); - - /* Use PLL as USB clock source */ - CLK_SetModuleClock(USBD_MODULE, CLK_CLKSEL3_USBDSEL_PLL, CLK_CLKDIV0_USB(3)); - -#else - /* Enable Internal RC 48MHz clock */ - CLK_EnableXtalRC(CLK_PWRCTL_HIRC48EN_Msk); - - /* Waiting for Internal RC clock ready */ - CLK_WaitClockReady(CLK_STATUS_HIRC48STB_Msk); - - /* Switch HCLK clock source to Internal RC and HCLK source divide 1 */ - CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_HIRC48, CLK_CLKDIV0_HCLK(1)); - - /* Use HIRC as UART clock source */ - CLK_SetModuleClock(UART0_MODULE, CLK_CLKSEL1_UARTSEL_HIRC, CLK_CLKDIV0_UART(1)); - - /* Use HIRC48 as USB clock source */ - CLK_SetModuleClock(USBD_MODULE, CLK_CLKSEL3_USBDSEL_HIRC48, CLK_CLKDIV0_USB(1)); -#endif - - /* Enable module clock */ - CLK_EnableModuleClock(USBD_MODULE); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(48000000 / 1000); -#endif - - // LED - GPIO_SetMode(LED_PORT, 1 << LED_PIN, GPIO_MODE_OUTPUT); -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - LED_PIN_IO = (state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} diff --git a/tinyusb/hw/bsp/nutiny_sdk_nuc120/board.mk b/tinyusb/hw/bsp/nutiny_sdk_nuc120/board.mk deleted file mode 100755 index 90b3e91f..00000000 --- a/tinyusb/hw/bsp/nutiny_sdk_nuc120/board.mk +++ /dev/null @@ -1,55 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nuvoton - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs-linux \ - -mcpu=cortex-m0 \ - -DCFG_EXAMPLE_MSC_READONLY \ - -DCFG_TUSB_MCU=OPT_MCU_NUC120 - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/nutiny_sdk_nuc120/nuc120_flash.ld - -SRC_C += \ - src/portable/nuvoton/nuc120/dcd_nuc120.c \ - hw/mcu/nuvoton/nuc100_120/Device/Nuvoton/NUC100Series/Source/system_NUC100Series.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/acmp.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/adc.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/clk.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/crc.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/fmc.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/gpio.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/i2c.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/i2s.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/pdma.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/ps2.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/pwm.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/rtc.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/sc.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/spi.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/sys.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/timer.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/uart.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/usbd.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/wdt.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/wwdt.c - -SRC_S += \ - hw/mcu/nuvoton/nuc100_120/Device/Nuvoton/NUC100Series/Source/GCC/startup_NUC100Series.S - -INC += \ - $(TOP)/hw/mcu/nuvoton/nuc100_120/Device/Nuvoton/NUC100Series/Include \ - $(TOP)/hw/mcu/nuvoton/nuc100_120/StdDriver/inc \ - $(TOP)/hw/mcu/nuvoton/nuc100_120/CMSIS/Include - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = NUC120LE3 - -# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton -# Please compile and install it from github source -flash: $(BUILD)/$(PROJECT).elf - openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit" diff --git a/tinyusb/hw/bsp/nutiny_sdk_nuc120/nuc120_flash.ld b/tinyusb/hw/bsp/nutiny_sdk_nuc120/nuc120_flash.ld deleted file mode 100755 index cab12c8b..00000000 --- a/tinyusb/hw/bsp/nutiny_sdk_nuc120/nuc120_flash.ld +++ /dev/null @@ -1,195 +0,0 @@ -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x20000 /* 128k */ - RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x4000 /* 16k */ -} - -/* Library configurations */ -GROUP(libgcc.a libc.a libm.a libnosys.a) - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __copy_table_start__ - * __copy_table_end__ - * __zero_table_start__ - * __zero_table_end__ - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - * __Vectors_End - * __Vectors_Size - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - KEEP(*(.vectors)) - __Vectors_End = .; - __Vectors_Size = __Vectors_End - __Vectors; - __end__ = .; - - *(.text*) - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - /* To copy multiple ROM to RAM sections, - * uncomment .copy.table section and, - * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ - /* - .copy.table : - { - . = ALIGN(4); - __copy_table_start__ = .; - LONG (__etext) - LONG (__data_start__) - LONG (__data_end__ - __data_start__) - LONG (__etext2) - LONG (__data2_start__) - LONG (__data2_end__ - __data2_start__) - __copy_table_end__ = .; - } > FLASH - */ - - /* To clear multiple BSS sections, - * uncomment .zero.table section and, - * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ - /* - .zero.table : - { - . = ALIGN(4); - __zero_table_start__ = .; - LONG (__bss_start__) - LONG (__bss_end__ - __bss_start__) - LONG (__bss2_start__) - LONG (__bss2_end__ - __bss2_start__) - __zero_table_end__ = .; - } > FLASH - */ - - __etext = .; - - .data : AT (__etext) - { - __data_start__ = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - } > RAM - - .heap (COPY): - { - __HeapBase = .; - __end__ = .; - end = __end__; - KEEP(*(.heap*)) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - KEEP(*(.stack*)) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -} diff --git a/tinyusb/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c b/tinyusb/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c deleted file mode 100755 index 0d78116b..00000000 --- a/tinyusb/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board.h" -#include "NUC100Series.h" -#include "clk.h" -#include "sys.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USBD_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT PB -#define LED_PIN 0 -#define LED_PIN_IO PB0 -#define LED_STATE_ON 0 - -void board_init(void) -{ - SYS_UnlockReg(); - - /* Enable Internal RC 22.1184 MHz clock */ - CLK_EnableXtalRC(CLK_PWRCON_OSC22M_EN_Msk); - - /* Waiting for Internal RC clock ready */ - CLK_WaitClockReady(CLK_CLKSTATUS_OSC22M_STB_Msk); - - /* Switch HCLK clock source to Internal RC and HCLK source divide 1 */ - CLK_SetHCLK(CLK_CLKSEL0_HCLK_S_HIRC, CLK_CLKDIV_HCLK(1)); - - /* Enable external XTAL 12 MHz clock */ - CLK_EnableXtalRC(CLK_PWRCON_XTL12M_EN_Msk); - - /* Waiting for external XTAL clock ready */ - CLK_WaitClockReady(CLK_CLKSTATUS_XTL12M_STB_Msk); - - /* Set core clock */ - CLK_SetCoreClock(48000000); - - /* Enable module clock */ - CLK_EnableModuleClock(USBD_MODULE); - - /* Select module clock source */ - CLK_SetModuleClock(USBD_MODULE, 0, CLK_CLKDIV_USB(1)); - - SYS_LockReg(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(48000000 / 1000); -#endif - - GPIO_SetMode(LED_PORT, 1UL << LED_PIN, GPIO_PMD_OUTPUT); -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ -#if 0 - /* this would be the simplest solution... *IF* the part supported the pin data interface */ - LED_PIN_IO = (state) ? LED_STATE_ON : (1-LED_STATE_ON); -#else - /* if the part's *PDIO pin data registers don't work, a more elaborate approach is needed */ - uint32_t irq_state = __get_PRIMASK(); - __disable_irq(); - uint32_t current = LED_PORT->DOUT & ~(1UL << LED_PIN); - LED_PORT->DOUT = current | (((state) ? LED_STATE_ON : (1UL-LED_STATE_ON)) << LED_PIN); - __set_PRIMASK(irq_state); -#endif -} - -uint32_t board_button_read(void) -{ - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} diff --git a/tinyusb/hw/bsp/nutiny_sdk_nuc505/board.mk b/tinyusb/hw/bsp/nutiny_sdk_nuc505/board.mk deleted file mode 100755 index e8514347..00000000 --- a/tinyusb/hw/bsp/nutiny_sdk_nuc505/board.mk +++ /dev/null @@ -1,60 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nuvoton - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs-linux \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -DCFG_TUSB_MCU=OPT_MCU_NUC505 - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/nuc505_flashtoram.ld - -SRC_C += \ - src/portable/nuvoton/nuc505/dcd_nuc505.c \ - hw/mcu/nuvoton/nuc505/Device/Nuvoton/NUC505Series/Source/system_NUC505Series.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/adc.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/clk.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/gpio.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/i2c.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/i2s.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/pwm.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/rtc.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/spi.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/spim.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/sys.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/timer.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/uart.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/wdt.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/wwdt.c - -SRC_S += \ - hw/mcu/nuvoton/nuc505/Device/Nuvoton/NUC505Series/Source/GCC/startup_NUC505Series.S - -INC += \ - $(TOP)/hw/mcu/nuvoton/nuc505/Device/Nuvoton/NUC505Series/Include \ - $(TOP)/hw/mcu/nuvoton/nuc505/StdDriver/inc \ - $(TOP)/hw/mcu/nuvoton/nuc505/CMSIS/Include - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = NUC505YO13Y - -# Note -# To be able to program the SPI flash, it need to boot with ICP mode "1011". -# However, in ICP mode, opencod cannot establish connection to the mcu. -# Therefore, there is no easy command line flash for NUC505 -# It is probably better to just use Nuvoton NuMicro ICP programming on windows to program the board -# - 1111 "SPI" (run from internal flash) -# - 1110 "USB" (mass storage emulator that accepts a .bin file) -# - 0111 "ICE-SPI" (allow external debugger access, but may not be programmable) -# - 1011 ICP mode (programmable via NuMicro ICP programming tool) - -# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton -# Please compile and install it from github source -flash: $(BUILD)/$(PROJECT).elf - openocd -f interface/nulink.cfg -f target/numicroM4.cfg -c "program $< reset exit" diff --git a/tinyusb/hw/bsp/nutiny_sdk_nuc505/nuc505_flashtoram.ld b/tinyusb/hw/bsp/nutiny_sdk_nuc505/nuc505_flashtoram.ld deleted file mode 100755 index 53d385cd..00000000 --- a/tinyusb/hw/bsp/nutiny_sdk_nuc505/nuc505_flashtoram.ld +++ /dev/null @@ -1,199 +0,0 @@ -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x80000 /* 512k */ - RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x20000 /* 128k */ -} - -/* Library configurations */ -GROUP(libgcc.a libc.a libm.a libnosys.a) - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __copy_table_start__ - * __copy_table_end__ - * __zero_table_start__ - * __zero_table_end__ - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - * __Vectors_End - * __Vectors_Size - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .startup : - { - KEEP(*(.vectors)) - __Vectors_End = .; - __Vectors_Size = __Vectors_End - __Vectors; - __end__ = .; - - KEEP(*(.preinit)) - - KEEP(*(.init)) - KEEP(*(.fini)) - - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - /* To copy multiple ROM to RAM sections, - * uncomment .copy.table section and, - * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ - /* - .copy.table : - { - . = ALIGN(4); - __copy_table_start__ = .; - LONG (__etext) - LONG (__data_start__) - LONG (__data_end__ - __data_start__) - LONG (__etext2) - LONG (__data2_start__) - LONG (__data2_end__ - __data2_start__) - __copy_table_end__ = .; - } > FLASH - */ - - /* To clear multiple BSS sections, - * uncomment .zero.table section and, - * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ - /* - .zero.table : - { - . = ALIGN(4); - __zero_table_start__ = .; - LONG (__bss_start__) - LONG (__bss_end__ - __bss_start__) - LONG (__bss2_start__) - LONG (__bss2_end__ - __bss2_start__) - __zero_table_end__ = .; - } > FLASH - */ - - __etext = .; - - .data : AT (__etext) - { - __data_start__ = .; - - *(.text*) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - } > RAM - - .heap (COPY): - { - __HeapBase = .; - __end__ = .; - end = __end__; - KEEP(*(.heap*)) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - KEEP(*(.stack*)) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -} diff --git a/tinyusb/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c b/tinyusb/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c deleted file mode 100755 index 49e66d2d..00000000 --- a/tinyusb/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board.h" -#include "NUC505Series.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USBD_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT PC -#define LED_PIN 3 -#define LED_STATE_ON 0 - -void board_init(void) -{ - /* Enable XTAL */ - CLK->PWRCTL |= CLK_PWRCTL_HXTEN_Msk; - - CLK_SetCoreClock(96000000); - - /* Set PCLK divider */ - CLK_SetModuleClock(PCLK_MODULE, 0, 1); - - /* Update System Core Clock */ - SystemCoreClockUpdate(); - - /* Enable USB IP clock */ - CLK_EnableModuleClock(USBD_MODULE); - - /* Select USB IP clock source */ - CLK_SetModuleClock(USBD_MODULE, CLK_USBD_SRC_EXT, 0); - - CLK_SetModuleClock(PCLK_MODULE, 0, 1); - - /* Enable PHY */ - USBD_ENABLE_PHY(); - /* wait PHY clock ready */ - while (1) { - USBD->EP[EPA].EPMPS = 0x20; - if (USBD->EP[EPA].EPMPS == 0x20) - break; - } - - /* Force SE0, and then clear it to connect*/ - USBD_SET_SE0(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(96000000 / 1000); -#endif - - GPIO_SetMode(LED_PORT, 1UL << LED_PIN, GPIO_MODE_OUTPUT); -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - uint32_t current = (state) ? LED_STATE_ON : (1-LED_STATE_ON); - current <<= LED_PIN; - uint32_t irq_state = __get_PRIMASK(); - __disable_irq(); - current |= LED_PORT->DOUT & ~(1UL << LED_PIN); - LED_PORT->DOUT = current; - __set_PRIMASK(irq_state); -} - -uint32_t board_button_read(void) -{ - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} diff --git a/tinyusb/hw/bsp/rp2040/board.h b/tinyusb/hw/bsp/rp2040/board.h deleted file mode 100755 index 237f29dc..00000000 --- a/tinyusb/hw/bsp/rp2040/board.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#ifdef PICO_DEFAULT_LED_PIN -#define LED_PIN PICO_DEFAULT_LED_PIN -#define LED_STATE_ON (!(PICO_DEFAULT_LED_PIN_INVERTED)) -#endif - -// Button pin is BOOTSEL which is flash CS pin -#define BUTTON_BOOTSEL -#define BUTTON_STATE_ACTIVE 0 - -#if defined(PICO_DEFAULT_UART_TX_PIN) && defined(PICO_DEFAULT_UART_RX_PIN) && defined(PICO_DEFAULT_UART) -#define UART_DEV PICO_DEFAULT_UART -#define UART_TX_PIN PICO_DEFAULT_UART_TX_PIN -#define UART_RX_PIN PICO_DEFAULT_UART_RX_PIN -#endif - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/rp2040/boards/adafruit_feather_rp2040/board.cmake b/tinyusb/hw/bsp/rp2040/boards/adafruit_feather_rp2040/board.cmake deleted file mode 100755 index e527a8ce..00000000 --- a/tinyusb/hw/bsp/rp2040/boards/adafruit_feather_rp2040/board.cmake +++ /dev/null @@ -1 +0,0 @@ -set(PICO_BOARD adafruit_feather_rp2040)
\ No newline at end of file diff --git a/tinyusb/hw/bsp/rp2040/boards/adafruit_itsybitsy_rp2040/board.cmake b/tinyusb/hw/bsp/rp2040/boards/adafruit_itsybitsy_rp2040/board.cmake deleted file mode 100755 index 3fd2dd06..00000000 --- a/tinyusb/hw/bsp/rp2040/boards/adafruit_itsybitsy_rp2040/board.cmake +++ /dev/null @@ -1 +0,0 @@ -set(PICO_BOARD adafruit_itsybitsy_rp2040)
\ No newline at end of file diff --git a/tinyusb/hw/bsp/rp2040/boards/adafruit_qtpy_rp2040/board.cmake b/tinyusb/hw/bsp/rp2040/boards/adafruit_qtpy_rp2040/board.cmake deleted file mode 100755 index 469929c5..00000000 --- a/tinyusb/hw/bsp/rp2040/boards/adafruit_qtpy_rp2040/board.cmake +++ /dev/null @@ -1 +0,0 @@ -set(PICO_BOARD adafruit_qtpy_rp2040)
\ No newline at end of file diff --git a/tinyusb/hw/bsp/rp2040/boards/pico_sdk/board.cmake b/tinyusb/hw/bsp/rp2040/boards/pico_sdk/board.cmake deleted file mode 100755 index d57cbe52..00000000 --- a/tinyusb/hw/bsp/rp2040/boards/pico_sdk/board.cmake +++ /dev/null @@ -1 +0,0 @@ -# This builds with settings based purely on the current PICO_BOARD set via the SDK diff --git a/tinyusb/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake b/tinyusb/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake deleted file mode 100755 index 8280c835..00000000 --- a/tinyusb/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake +++ /dev/null @@ -1 +0,0 @@ -set(PICO_BOARD pico)
\ No newline at end of file diff --git a/tinyusb/hw/bsp/rp2040/family.c b/tinyusb/hw/bsp/rp2040/family.c deleted file mode 100755 index 10ead277..00000000 --- a/tinyusb/hw/bsp/rp2040/family.c +++ /dev/null @@ -1,199 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "pico/stdlib.h" -#include "pico/binary_info.h" -#include "hardware/gpio.h" -#include "hardware/sync.h" -#include "hardware/structs/ioqspi.h" -#include "hardware/structs/sio.h" - -#include "bsp/board.h" -#include "board.h" - -#ifdef BUTTON_BOOTSEL -// This example blinks the Picoboard LED when the BOOTSEL button is pressed. -// -// Picoboard has a button attached to the flash CS pin, which the bootrom -// checks, and jumps straight to the USB bootcode if the button is pressed -// (pulling flash CS low). We can check this pin in by jumping to some code in -// SRAM (so that the XIP interface is not required), floating the flash CS -// pin, and observing whether it is pulled low. -// -// This doesn't work if others are trying to access flash at the same time, -// e.g. XIP streamer, or the other core. -bool __no_inline_not_in_flash_func(get_bootsel_button)() { - const uint CS_PIN_INDEX = 1; - - // Must disable interrupts, as interrupt handlers may be in flash, and we - // are about to temporarily disable flash access! - uint32_t flags = save_and_disable_interrupts(); - - // Set chip select to Hi-Z - hw_write_masked(&ioqspi_hw->io[CS_PIN_INDEX].ctrl, - GPIO_OVERRIDE_LOW << IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_LSB, - IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS); - - // Note we can't call into any sleep functions in flash right now - for (volatile int i = 0; i < 1000; ++i); - - // The HI GPIO registers in SIO can observe and control the 6 QSPI pins. - // Note the button pulls the pin *low* when pressed. - bool button_state = (sio_hw->gpio_hi_in & (1u << CS_PIN_INDEX)); - - // Need to restore the state of chip select, else we are going to have a - // bad time when we return to code in flash! - hw_write_masked(&ioqspi_hw->io[CS_PIN_INDEX].ctrl, - GPIO_OVERRIDE_NORMAL << IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_LSB, - IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS); - - restore_interrupts(flags); - - return button_state; -} -#endif - -//------------- Segger RTT retarget -------------// -#if defined(LOGGER_RTT) - -// Logging with RTT -// - If RTT Control Block is not found by 'Auto Detection` try to use 'Search Range` with '0x20000000 0x10000' -// - SWD speed is rather slow around 1000Khz - -#include "pico/stdio/driver.h" -#include "SEGGER_RTT.h" - -static void stdio_rtt_write (const char *buf, int length) -{ - SEGGER_RTT_Write(0, buf, length); -} - -static int stdio_rtt_read (char *buf, int len) -{ - return SEGGER_RTT_Read(0, buf, len); -} - -static stdio_driver_t stdio_rtt = -{ - .out_chars = stdio_rtt_write, - .out_flush = NULL, - .in_chars = stdio_rtt_read -}; - -void stdio_rtt_init(void) -{ - stdio_set_driver_enabled(&stdio_rtt, true); -} - -#endif - -#ifdef UART_DEV -static uart_inst_t *uart_inst; -#endif - -void board_init(void) -{ -#ifdef LED_PIN - bi_decl(bi_1pin_with_name(LED_PIN, "LED")); - gpio_init(LED_PIN); - gpio_set_dir(LED_PIN, GPIO_OUT); -#endif - - // Button -#ifndef BUTTON_BOOTSEL -#endif - -#if defined(UART_DEV) && defined(LIB_PICO_STDIO_UART) - bi_decl(bi_2pins_with_func(UART_TX_PIN, UART_TX_PIN, GPIO_FUNC_UART)); - uart_inst = uart_get_instance(UART_DEV); - stdio_uart_init_full(uart_inst, CFG_BOARD_UART_BAUDRATE, UART_TX_PIN, UART_RX_PIN); -#endif - -#if defined(LOGGER_RTT) - stdio_rtt_init(); -#endif - - // todo probably set up device mode? -#if TUSB_OPT_DEVICE_ENABLED - -#endif - -#if TUSB_OPT_HOST_ENABLED - // set portfunc to host !!! -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ -#ifdef LED_PIN - gpio_put(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -#endif -} - -uint32_t board_button_read(void) -{ -#ifdef BUTTON_BOOTSEL - return BUTTON_STATE_ACTIVE == get_bootsel_button(); -#else - return 0; -#endif -} - -int board_uart_read(uint8_t* buf, int len) -{ -#ifdef UART_DEV - for(int i=0;i<len;i++) { - buf[i] = uart_getc(uart_inst); - } - return len; -#else - return 0; -#endif -} - -int board_uart_write(void const * buf, int len) -{ -#ifdef UART_DEV - char const* bufch = (char const*) buf; - for(int i=0;i<len;i++) { - uart_putc(uart_inst, bufch[i]); - } - return len; -#else - return 0; -#endif -} - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -// rp2040 implementation will install approriate handler when initializing -// tinyusb. There is no need to forward IRQ from application -//--------------------------------------------------------------------+ diff --git a/tinyusb/hw/bsp/rp2040/family.cmake b/tinyusb/hw/bsp/rp2040/family.cmake deleted file mode 100755 index 41960b6c..00000000 --- a/tinyusb/hw/bsp/rp2040/family.cmake +++ /dev/null @@ -1,154 +0,0 @@ -cmake_minimum_required(VERSION 3.13) -if (NOT TARGET _rp2040_family_inclusion_marker) - add_library(_rp2040_family_inclusion_marker INTERFACE) - - if (NOT BOARD) - message("BOARD not specified, defaulting to pico_sdk") - set(BOARD pico_sdk) - endif() - - # add the SDK in case we are standalone tinyusb example (noop if already present) - include(${CMAKE_CURRENT_LIST_DIR}/pico_sdk_import.cmake) - - # include basic family CMake functionality - set(FAMILY_MCUS RP2040) - - include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) - - # TOP is absolute path to root directory of TinyUSB git repo - set(TOP "${CMAKE_CURRENT_LIST_DIR}/../../..") - get_filename_component(TOP "${TOP}" REALPATH) - - if (NOT PICO_TINYUSB_PATH) - set(PICO_TINYUSB_PATH ${TOP}) - endif() - - # Base config for both device and host; wrapped by SDK's tinyusb_common - add_library(tinyusb_common_base INTERFACE) - - target_sources(tinyusb_common_base INTERFACE - ${TOP}/src/tusb.c - ${TOP}/src/common/tusb_fifo.c - ) - - target_include_directories(tinyusb_common_base INTERFACE - ${TOP}/src - ${TOP}/src/common - ${TOP}/hw - ) - - target_link_libraries(tinyusb_common_base INTERFACE - hardware_structs - hardware_irq - hardware_resets - pico_sync - ) - - set(TINYUSB_DEBUG_LEVEL 0) - if (CMAKE_BUILD_TYPE STREQUAL "Debug") - message("Compiling TinyUSB with CFG_TUSB_DEBUG=1") - set(TINYUSB_DEBUG_LEVEL 1) - endif () - - target_compile_definitions(tinyusb_common_base INTERFACE - CFG_TUSB_MCU=OPT_MCU_RP2040 - CFG_TUSB_OS=OPT_OS_PICO - CFG_TUSB_DEBUG=${TINYUSB_DEBUG_LEVEL} - ) - - # Base config for device mode; wrapped by SDK's tinyusb_device - add_library(tinyusb_device_base INTERFACE) - target_sources(tinyusb_device_base INTERFACE - ${TOP}/src/portable/raspberrypi/rp2040/dcd_rp2040.c - ${TOP}/src/portable/raspberrypi/rp2040/rp2040_usb.c - ${TOP}/src/device/usbd.c - ${TOP}/src/device/usbd_control.c - ${TOP}/src/class/audio/audio_device.c - ${TOP}/src/class/cdc/cdc_device.c - ${TOP}/src/class/dfu/dfu_device.c - ${TOP}/src/class/dfu/dfu_rt_device.c - ${TOP}/src/class/hid/hid_device.c - ${TOP}/src/class/midi/midi_device.c - ${TOP}/src/class/msc/msc_device.c - ${TOP}/src/class/net/net_device.c - ${TOP}/src/class/usbtmc/usbtmc_device.c - ${TOP}/src/class/vendor/vendor_device.c - ) - - - # Base config for host mode; wrapped by SDK's tinyusb_host - add_library(tinyusb_host_base INTERFACE) - target_sources(tinyusb_host_base INTERFACE - ${TOP}/src/portable/raspberrypi/rp2040/hcd_rp2040.c - ${TOP}/src/portable/raspberrypi/rp2040/rp2040_usb.c - ${TOP}/src/host/usbh.c - ${TOP}/src/host/usbh_control.c - ${TOP}/src/host/hub.c - ${TOP}/src/class/cdc/cdc_host.c - ${TOP}/src/class/hid/hid_host.c - ${TOP}/src/class/msc/msc_host.c - ${TOP}/src/class/vendor/vendor_host.c - ) - - # Sometimes have to do host specific actions in mostly - # common functions - target_compile_definitions(tinyusb_host_base INTERFACE - RP2040_USB_HOST_MODE=1 - ) - - add_library(tinyusb_bsp INTERFACE) - target_sources(tinyusb_bsp INTERFACE - ${TOP}/hw/bsp/rp2040/family.c - ) -# target_include_directories(tinyusb_bsp INTERFACE -# ${TOP}/hw/bsp/rp2040) - - # tinyusb_additions will hold our extra settings for examples - add_library(tinyusb_additions INTERFACE) - - target_compile_definitions(tinyusb_additions INTERFACE - PICO_RP2040_USB_DEVICE_ENUMERATION_FIX=1 - ) - - if(DEFINED LOG) - target_compile_definitions(tinyusb_additions INTERFACE CFG_TUSB_DEBUG=${LOG} ) - endif() - - if(LOGGER STREQUAL "rtt") - target_compile_definitions(tinyusb_additions INTERFACE - LOGGER_RTT - SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL - ) - - target_sources(tinyusb_additions INTERFACE - ${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c - ) - - target_include_directories(tinyusb_additions INTERFACE - ${TOP}/lib/SEGGER_RTT/RTT - ) - endif() - - function(family_configure_target TARGET) - pico_add_extra_outputs(${TARGET}) - pico_enable_stdio_uart(${TARGET} 1) - target_link_libraries(${TARGET} PUBLIC pico_stdlib pico_bootsel_via_double_reset tinyusb_board tinyusb_additions) - endfunction() - - function(family_configure_device_example TARGET) - family_configure_target(${TARGET}) - target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_device) - endfunction() - - function(family_configure_host_example TARGET) - family_configure_target(${TARGET}) - target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_host) - endfunction() - - function(family_initialize_project PROJECT DIR) - # call the original version of this function from family_common.cmake - _family_initialize_project(${PROJECT} ${DIR}) - enable_language(C CXX ASM) - pico_sdk_init() - endfunction() -endif() diff --git a/tinyusb/hw/bsp/rp2040/family.mk b/tinyusb/hw/bsp/rp2040/family.mk deleted file mode 100755 index 5db784b1..00000000 --- a/tinyusb/hw/bsp/rp2040/family.mk +++ /dev/null @@ -1,19 +0,0 @@ -JLINK_DEVICE = rp2040_m0_0 -PYOCD_TARGET = rp2040 - -ifeq ($(DEBUG), 1) -CMAKE_DEFSYM += -DCMAKE_BUILD_TYPE=Debug -endif - -$(BUILD): - cmake -S . -B $(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) -DPICO_BUILD_DOCS=0 $(CMAKE_DEFSYM) - -all: $(BUILD) - $(MAKE) -C $(BUILD) - -clean: - $(RM) -rf $(BUILD) - -flash: flash-pyocd -flash-uf2: - @$(CP) $(BUILD)/$(PROJECT).uf2 /media/$(USER)/RPI-RP2 diff --git a/tinyusb/hw/bsp/rp2040/pico_sdk_import.cmake b/tinyusb/hw/bsp/rp2040/pico_sdk_import.cmake deleted file mode 100755 index 28efe9ea..00000000 --- a/tinyusb/hw/bsp/rp2040/pico_sdk_import.cmake +++ /dev/null @@ -1,62 +0,0 @@ -# This is a copy of <PICO_SDK_PATH>/external/pico_sdk_import.cmake - -# This can be dropped into an external project to help locate this SDK -# It should be include()ed prior to project() - -if (DEFINED ENV{PICO_SDK_PATH} AND (NOT PICO_SDK_PATH)) - set(PICO_SDK_PATH $ENV{PICO_SDK_PATH}) - message("Using PICO_SDK_PATH from environment ('${PICO_SDK_PATH}')") -endif () - -if (DEFINED ENV{PICO_SDK_FETCH_FROM_GIT} AND (NOT PICO_SDK_FETCH_FROM_GIT)) - set(PICO_SDK_FETCH_FROM_GIT $ENV{PICO_SDK_FETCH_FROM_GIT}) - message("Using PICO_SDK_FETCH_FROM_GIT from environment ('${PICO_SDK_FETCH_FROM_GIT}')") -endif () - -if (DEFINED ENV{PICO_SDK_FETCH_FROM_GIT_PATH} AND (NOT PICO_SDK_FETCH_FROM_GIT_PATH)) - set(PICO_SDK_FETCH_FROM_GIT_PATH $ENV{PICO_SDK_FETCH_FROM_GIT_PATH}) - message("Using PICO_SDK_FETCH_FROM_GIT_PATH from environment ('${PICO_SDK_FETCH_FROM_GIT_PATH}')") -endif () - -set(PICO_SDK_PATH "${PICO_SDK_PATH}" CACHE PATH "Path to the Raspberry Pi Pico SDK") -set(PICO_SDK_FETCH_FROM_GIT "${PICO_SDK_FETCH_FROM_GIT}" CACHE BOOL "Set to ON to fetch copy of SDK from git if not otherwise locatable") -set(PICO_SDK_FETCH_FROM_GIT_PATH "${PICO_SDK_FETCH_FROM_GIT_PATH}" CACHE FILEPATH "location to download SDK") - -if (NOT PICO_SDK_PATH) - if (PICO_SDK_FETCH_FROM_GIT) - include(FetchContent) - set(FETCHCONTENT_BASE_DIR_SAVE ${FETCHCONTENT_BASE_DIR}) - if (PICO_SDK_FETCH_FROM_GIT_PATH) - get_filename_component(FETCHCONTENT_BASE_DIR "${PICO_SDK_FETCH_FROM_GIT_PATH}" REALPATH BASE_DIR "${CMAKE_SOURCE_DIR}") - endif () - FetchContent_Declare( - pico_sdk - GIT_REPOSITORY https://github.com/raspberrypi/pico-sdk - GIT_TAG master - ) - if (NOT pico_sdk) - message("Downloading Raspberry Pi Pico SDK") - FetchContent_Populate(pico_sdk) - set(PICO_SDK_PATH ${pico_sdk_SOURCE_DIR}) - endif () - set(FETCHCONTENT_BASE_DIR ${FETCHCONTENT_BASE_DIR_SAVE}) - else () - message(FATAL_ERROR - "SDK location was not specified. Please set PICO_SDK_PATH or set PICO_SDK_FETCH_FROM_GIT to on to fetch from git." - ) - endif () -endif () - -get_filename_component(PICO_SDK_PATH "${PICO_SDK_PATH}" REALPATH BASE_DIR "${CMAKE_BINARY_DIR}") -if (NOT EXISTS ${PICO_SDK_PATH}) - message(FATAL_ERROR "Directory '${PICO_SDK_PATH}' not found") -endif () - -set(PICO_SDK_INIT_CMAKE_FILE ${PICO_SDK_PATH}/pico_sdk_init.cmake) -if (NOT EXISTS ${PICO_SDK_INIT_CMAKE_FILE}) - message(FATAL_ERROR "Directory '${PICO_SDK_PATH}' does not appear to contain the Raspberry Pi Pico SDK") -endif () - -set(PICO_SDK_PATH ${PICO_SDK_PATH} CACHE PATH "Path to the Raspberry Pi Pico SDK" FORCE) - -include(${PICO_SDK_INIT_CMAKE_FILE}) diff --git a/tinyusb/hw/bsp/rx/boards/gr_citrus/board.mk b/tinyusb/hw/bsp/rx/boards/gr_citrus/board.mk deleted file mode 100755 index 0eba9461..00000000 --- a/tinyusb/hw/bsp/rx/boards/gr_citrus/board.mk +++ /dev/null @@ -1,24 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/renesas/rx - -CFLAGS += \ - -mcpu=rx610 \ - -misa=v1 \ - -DCFG_TUSB_MCU=OPT_MCU_RX63X - -MCU_DIR = hw/mcu/renesas/rx/rx63n - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/r5f5631fd.ld - -# For freeRTOS port source -FREERTOS_PORT = RX600 - -# For flash-jlink target -JLINK_DEVICE = R5F5631F -JLINK_IF = JTAG - -# For flash-pyocd target -PYOCD_TARGET = - -# flash using jlink -flash: flash-jlink diff --git a/tinyusb/hw/bsp/rx/boards/gr_citrus/gr_citrus.c b/tinyusb/hw/bsp/rx/boards/gr_citrus/gr_citrus.c deleted file mode 100755 index caf5fd6f..00000000 --- a/tinyusb/hw/bsp/rx/boards/gr_citrus/gr_citrus.c +++ /dev/null @@ -1,275 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Koji Kitayama - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* How to connect JLink and GR-CITRUS - * - * GR-CITRUS needs to solder some pads to enable JTAG interface. - * - Short the following pads individually with solder. - * - J4 - * - J5 - * - Short EMLE pad and 3.3V(GR-CITRUS pin name) with a wire. - * - * The pads are [the back side of GR-CITRUS](https://www.slideshare.net/MinaoYamamoto/grcitrusrx631/2). - * - * Connect the pins between GR-CITRUS and JLink as follows. - * - * | Function | GR-CITRUS pin | JLink pin No.| note | - * |:---------:|:-------------:|:------------:|:--------:| - * | VTref | 3.3V | 1 | | - * | TRST | 5 | 3 | | - * | GND | GND | 4 | | - * | TDI | 3 | 5 | | - * | TMS | 2 | 7 | | - * | TCK/FINEC | 14 | 9 | short J4 | - * | TDO | 9 | 13 | short J5 | - * | nRES | RST | 15 | | - * - * JLink firmware needs to update to V6.96 or newer version to avoid - * [a bug](https://forum.segger.com/index.php/Thread/7758-SOLVED-Bug-in-JLink-from-V6-88b-regarding-RX65N) - * regarding downloading. - */ - -#include "../board.h" -#include "iodefine.h" -#include "interrupt_handlers.h" - -#define IRQ_PRIORITY_CMT0 5 -#define IRQ_PRIORITY_USBI0 6 -#define IRQ_PRIORITY_SCI0 5 - -#define SYSTEM_PRCR_PRC1 (1<<1) -#define SYSTEM_PRCR_PRKEY (0xA5u<<8) - -#define CMT_PCLK 48000000 -#define CMT_CMCR_CKS_DIV_128 2 -#define CMT_CMCR_CMIE (1<<6) -#define MPC_PFS_ISEL (1<<6) - -#define SCI_PCLK 48000000 -#define SCI_SSR_FER (1<<4) -#define SCI_SSR_ORER (1<<5) - -#define SCI_SCR_TEIE (1u<<2) -#define SCI_SCR_RE (1u<<4) -#define SCI_SCR_TE (1u<<5) -#define SCI_SCR_RIE (1u<<6) -#define SCI_SCR_TIE (1u<<7) - -//--------------------------------------------------------------------+ -// SCI0 handling -//--------------------------------------------------------------------+ -typedef struct { - uint8_t *buf; - uint32_t cnt; -} sci_buf_t; -static volatile sci_buf_t sci0_buf[2]; - -void INT_Excep_SCI0_TXI0(void) -{ - uint8_t *buf = sci0_buf[0].buf; - uint32_t cnt = sci0_buf[0].cnt; - - if (!buf || !cnt) { - SCI0.SCR.BYTE &= ~(SCI_SCR_TEIE | SCI_SCR_TE | SCI_SCR_TIE); - return; - } - SCI0.TDR = *buf; - if (--cnt) { - ++buf; - } else { - buf = NULL; - SCI0.SCR.BIT.TIE = 0; - SCI0.SCR.BIT.TEIE = 1; - } - sci0_buf[0].buf = buf; - sci0_buf[0].cnt = cnt; -} - -void INT_Excep_SCI0_TEI0(void) -{ - SCI0.SCR.BYTE &= ~(SCI_SCR_TEIE | SCI_SCR_TE | SCI_SCR_TIE); -} - -void INT_Excep_SCI0_RXI0(void) -{ - uint8_t *buf = sci0_buf[1].buf; - uint32_t cnt = sci0_buf[1].cnt; - - if (!buf || !cnt || - (SCI0.SSR.BYTE & (SCI_SSR_FER | SCI_SSR_ORER))) { - sci0_buf[1].buf = NULL; - SCI0.SSR.BYTE = 0; - SCI0.SCR.BYTE &= ~(SCI_SCR_RE | SCI_SCR_RIE); - return; - } - *buf = SCI0.RDR; - if (--cnt) { - ++buf; - } else { - buf = NULL; - SCI0.SCR.BYTE &= ~(SCI_SCR_RE | SCI_SCR_RIE); - } - sci0_buf[1].buf = buf; - sci0_buf[1].cnt = cnt; -} - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void INT_Excep_USB0_USBI0(void) -{ - tud_int_handler(0); -} - -void board_init(void) -{ -#if CFG_TUSB_OS == OPT_OS_NONE - /* Enable CMT0 */ - SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY | SYSTEM_PRCR_PRC1; - MSTP(CMT0) = 0; - SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY; - /* Setup 1ms tick timer */ - CMT0.CMCNT = 0; - CMT0.CMCOR = CMT_PCLK / 1000 / 128; - CMT0.CMCR.WORD = CMT_CMCR_CMIE | CMT_CMCR_CKS_DIV_128; - IR(CMT0, CMI0) = 0; - IPR(CMT0, CMI0) = IRQ_PRIORITY_CMT0; - IEN(CMT0, CMI0) = 1; - CMT.CMSTR0.BIT.STR0 = 1; -#endif - - /* Unlock MPC registers */ - MPC.PWPR.BIT.B0WI = 0; - MPC.PWPR.BIT.PFSWE = 1; - /* LED PA0 */ - PORTA.PMR.BIT.B0 = 0U; - PORTA.PODR.BIT.B0 = 0U; - PORTA.PDR.BIT.B0 = 1U; - /* UART TXD0 => P20, RXD0 => P21 */ - PORT2.PMR.BIT.B0 = 1U; - PORT2.PCR.BIT.B0 = 1U; - MPC.P20PFS.BYTE = 0b01010; - PORT2.PMR.BIT.B1 = 1U; - MPC.P21PFS.BYTE = 0b01010; - /* USB VBUS -> P16 DPUPE -> P14 */ - PORT1.PMR.BIT.B4 = 1U; - PORT1.PMR.BIT.B6 = 1U; - MPC.P14PFS.BYTE = 0b10001; - MPC.P16PFS.BYTE = MPC_PFS_ISEL | 0b10001; - MPC.PFUSB0.BIT.PUPHZS = 1; - /* Lock MPC registers */ - MPC.PWPR.BIT.PFSWE = 0; - MPC.PWPR.BIT.B0WI = 1; - - IR(USB0, USBI0) = 0; - IPR(USB0, USBI0) = IRQ_PRIORITY_USBI0; - - /* Enable SCI0 */ - SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY | SYSTEM_PRCR_PRC1; - MSTP(SCI0) = 0; - SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY; - SCI0.BRR = (SCI_PCLK / (32 * 115200)) - 1; - IR(SCI0, RXI0) = 0; - IR(SCI0, TXI0) = 0; - IR(SCI0, TEI0) = 0; - IPR(SCI0, RXI0) = IRQ_PRIORITY_SCI0; - IPR(SCI0, TXI0) = IRQ_PRIORITY_SCI0; - IPR(SCI0, TEI0) = IRQ_PRIORITY_SCI0; - IEN(SCI0, RXI0) = 1; - IEN(SCI0, TXI0) = 1; - IEN(SCI0, TEI0) = 1; -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - PORTA.PODR.BIT.B0 = state ? 1 : 0; -} - -uint32_t board_button_read(void) -{ - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - sci0_buf[1].buf = buf; - sci0_buf[1].cnt = len; - SCI0.SCR.BYTE |= SCI_SCR_RE | SCI_SCR_RIE; - while (SCI0.SCR.BIT.RE) ; - return len - sci0_buf[1].cnt; -} - -int board_uart_write(void const *buf, int len) -{ - sci0_buf[0].buf = (uint8_t*)buf; - sci0_buf[0].cnt = len; - SCI0.SCR.BYTE |= SCI_SCR_TE | SCI_SCR_TIE; - while (SCI0.SCR.BIT.TE) ; - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void INT_Excep_CMT0_CMI0(void) -{ - ++system_ticks; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#else -uint32_t SystemCoreClock = 96000000; -#endif - -int close(int fd) -{ - (void)fd; - return -1; -} -int fstat(int fd, void *pstat) -{ - (void)fd; - (void)pstat; - return 0; -} -off_t lseek(int fd, off_t pos, int whence) -{ - (void)fd; - (void)pos; - (void)whence; - return 0; -} -int isatty(int fd) -{ - (void)fd; - return 1; -} diff --git a/tinyusb/hw/bsp/rx/boards/gr_citrus/hwinit.c b/tinyusb/hw/bsp/rx/boards/gr_citrus/hwinit.c deleted file mode 100755 index 8245d774..00000000 --- a/tinyusb/hw/bsp/rx/boards/gr_citrus/hwinit.c +++ /dev/null @@ -1,31 +0,0 @@ -/************************************************************************/ -/* File Version: V1.00 */ -/* Date Generated: 08/07/2013 */ -/************************************************************************/ - -#include "iodefine.h" -#ifdef __cplusplus -extern "C" { -#endif -extern void HardwareSetup(void); -#ifdef __cplusplus -} -#endif - -void HardwareSetup(void) -{ - SYSTEM.PRCR.WORD = 0xA503u; - SYSTEM.SOSCCR.BYTE = 0x01u; - SYSTEM.MOSCWTCR.BYTE = 0x0Du; - SYSTEM.PLLWTCR.BYTE = 0x0Eu; - SYSTEM.PLLCR.WORD = 0x0F00u; - SYSTEM.MOSCCR.BYTE = 0x00u; - SYSTEM.PLLCR2.BYTE = 0x00u; - for (unsigned i = 0; i < 2075u; ++i) __asm("nop"); - SYSTEM.SCKCR.LONG = 0x21021211u; - SYSTEM.SCKCR2.WORD = 0x0033u; - SYSTEM.SCKCR3.WORD = 0x0400u; - SYSTEM.SYSCR0.WORD = 0x5A01; - SYSTEM.MSTPCRB.BIT.MSTPB15 = 0; - SYSTEM.PRCR.WORD = 0xA500u; -} diff --git a/tinyusb/hw/bsp/rx/boards/gr_citrus/r5f5631fd.ld b/tinyusb/hw/bsp/rx/boards/gr_citrus/r5f5631fd.ld deleted file mode 100755 index bb9c297c..00000000 --- a/tinyusb/hw/bsp/rx/boards/gr_citrus/r5f5631fd.ld +++ /dev/null @@ -1,127 +0,0 @@ -__USTACK_SIZE = 0x00000400; -__ISTACK_SIZE = 0x00000400; - -MEMORY -{ - RAM : ORIGIN = 0x4, LENGTH = 0x3fffc - ROM : ORIGIN = 0xFFE00000, LENGTH = 0x200000 -} -SECTIONS -{ - .fvectors 0xFFFFFF80: AT(0xFFFFFF80) - { - KEEP(*(.fvectors)) - } > ROM - .text 0xFFE00000: AT(0xFFE00000) - { - *(.text) - *(.text.*) - *(P) - etext = .; - } > ROM - .rvectors ALIGN(4): - { - _rvectors_start = .; - KEEP(*(.rvectors)) - _rvectors_end = .; - } > ROM - .init : - { - KEEP(*(.init)) - __preinit_array_start = .; - KEEP(*(.preinit_array)) - __preinit_array_end = .; - __init_array_start = (. + 3) & ~ 3; - KEEP(*(.init_array)) - KEEP(*(SORT(.init_array.*))) - __init_array_end = .; - __fini_array_start = .; - KEEP(*(.fini_array)) - KEEP(*(SORT(.fini_array.*))) - __fini_array_end = .; - } > ROM - .fini : - { - KEEP(*(.fini)) - } > ROM - .got : - { - *(.got) - *(.got.plt) - } > ROM - .rodata : - { - *(.rodata) - *(.rodata.*) - *(C_1) - *(C_2) - *(C) - _erodata = .; - } > ROM - .eh_frame_hdr : - { - *(.eh_frame_hdr) - } > ROM - .eh_frame : - { - *(.eh_frame) - } > ROM - .jcr : - { - *(.jcr) - } > ROM - .tors : - { - __CTOR_LIST__ = .; - . = ALIGN(2); - ___ctors = .; - *(.ctors) - ___ctors_end = .; - __CTOR_END__ = .; - __DTOR_LIST__ = .; - ___dtors = .; - *(.dtors) - ___dtors_end = .; - __DTOR_END__ = .; - . = ALIGN(2); - _mdata = .; - } > ROM - .data : AT(_mdata) - { - _data = .; - *(.data) - *(.data.*) - *(D) - *(D_1) - *(D_2) - _edata = .; - } > RAM - .gcc_exc : - { - *(.gcc_exc) - } > RAM - .bss : - { - _bss = .; - *(.bss) - *(.bss.**) - *(COMMON) - *(B) - *(B_1) - *(B_2) - _ebss = .; - _end = .; - } > RAM - .ustack : - { - . = ALIGN(8); - . = . + __USTACK_SIZE; - PROVIDE(_ustack = .); - } > RAM - .istack : - { - . = ALIGN(8); - . = . + __ISTACK_SIZE; - PROVIDE(_istack = .); - } > RAM -} diff --git a/tinyusb/hw/bsp/rx/boards/rx65n_target/board.mk b/tinyusb/hw/bsp/rx/boards/rx65n_target/board.mk deleted file mode 100755 index fc76d79f..00000000 --- a/tinyusb/hw/bsp/rx/boards/rx65n_target/board.mk +++ /dev/null @@ -1,25 +0,0 @@ -CFLAGS += \ - -mcpu=rx64m \ - -misa=v2 \ - -DCFG_TUSB_MCU=OPT_MCU_RX65X \ - -DIR_USB0_USBI0=IR_PERIB_INTB185 \ - -DIER_USB0_USBI0=IER_PERIB_INTB185 \ - -DIEN_USB0_USBI0=IEN_PERIB_INTB185 - -MCU_DIR = hw/mcu/renesas/rx/rx65n - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/r5f565ne.ld - -# For freeRTOS port source -FREERTOS_PORT = RX600 - -# For flash-jlink target -JLINK_DEVICE = R5F565NE -JLINK_IF = JTAG - -# For flash-pyocd target -PYOCD_TARGET = - -# flash using rfp-cli -flash: flash-rfp diff --git a/tinyusb/hw/bsp/rx/boards/rx65n_target/r5f565ne.ld b/tinyusb/hw/bsp/rx/boards/rx65n_target/r5f565ne.ld deleted file mode 100755 index 8e5617f2..00000000 --- a/tinyusb/hw/bsp/rx/boards/rx65n_target/r5f565ne.ld +++ /dev/null @@ -1,168 +0,0 @@ -__USTACK_SIZE = 0x00000400; -__ISTACK_SIZE = 0x00000400; - -MEMORY -{ - RAM : ORIGIN = 0x4, LENGTH = 0x3fffc - RAM2 : ORIGIN = 0x00800000, LENGTH = 0x60000 - OFS : ORIGIN = 0xFE7F5D00, LENGTH = 128 - ROM : ORIGIN = 0xFFE00000, LENGTH = 0x200000 -} -SECTIONS -{ - .exvectors 0xFFFFFF80: AT(0xFFFFFF80) - { - "_exvectors_start" = .; - KEEP(*(.exvectors)) - "_exvectors_end" = .; - } >ROM - .fvectors 0xFFFFFFFC: AT(0xFFFFFFFC) - { - KEEP(*(.fvectors)) - } > ROM - .text 0xFFE00000: AT(0xFFE00000) - { - *(.text) - *(.text.*) - *(P) - KEEP(*(.text.*_isr)) - etext = .; - } > ROM - .rvectors ALIGN(4): - { - _rvectors_start = .; - KEEP(*(.rvectors)) - _rvectors_end = .; - } > ROM - .init : - { - KEEP(*(.init)) - __preinit_array_start = .; - KEEP(*(.preinit_array)) - __preinit_array_end = .; - __init_array_start = (. + 3) & ~ 3; - KEEP(*(.init_array)) - KEEP(*(SORT(.init_array.*))) - __init_array_end = .; - __fini_array_start = .; - KEEP(*(.fini_array)) - KEEP(*(SORT(.fini_array.*))) - __fini_array_end = .; - } > ROM - .fini : - { - KEEP(*(.fini)) - } > ROM - .got : - { - *(.got) - *(.got.plt) - } > ROM - .rodata : - { - *(.rodata) - *(.rodata.*) - *(C_1) - *(C_2) - *(C) - _erodata = .; - } > ROM - .eh_frame_hdr : - { - *(.eh_frame_hdr) - } > ROM - .eh_frame : - { - *(.eh_frame) - } > ROM - .jcr : - { - *(.jcr) - } > ROM - .tors : - { - __CTOR_LIST__ = .; - . = ALIGN(2); - ___ctors = .; - *(.ctors) - ___ctors_end = .; - __CTOR_END__ = .; - __DTOR_LIST__ = .; - ___dtors = .; - *(.dtors) - ___dtors_end = .; - __DTOR_END__ = .; - . = ALIGN(2); - _mdata = .; - } > ROM - .data : AT(_mdata) - { - _data = .; - *(.data) - *(.data.*) - *(D) - *(D_1) - *(D_2) - _edata = .; - } > RAM - .gcc_exc : - { - *(.gcc_exc) - } > RAM - .bss : - { - _bss = .; - *(.bss) - *(.bss.**) - *(COMMON) - *(B) - *(B_1) - *(B_2) - _ebss = .; - _end = .; - } > RAM - .ustack : - { - . = ALIGN(8); - . = . + __USTACK_SIZE; - PROVIDE(_ustack = .); - } > RAM - .istack : - { - . = ALIGN(8); - . = . + __ISTACK_SIZE; - PROVIDE(_istack = .); - } > RAM - .ofs1 0xFE7F5D00: AT(0xFE7F5D00) - { - KEEP(*(.ofs1)) - } > OFS - .ofs2 0xFE7F5D10: AT(0xFE7F5D10) - { - KEEP(*(.ofs2)) - } > OFS - .ofs3 0xFE7F5D20: AT(0xFE7F5D20) - { - KEEP(*(.ofs3)) - } > OFS - .ofs4 0xFE7F5D40: AT(0xFE7F5D40) - { - KEEP(*(.ofs4)) - } > OFS - .ofs5 0xFE7F5D48: AT(0xFE7F5D48) - { - KEEP(*(.ofs5)) - } > OFS - .ofs6 0xFE7F5D50: AT(0xFE7F5D50) - { - KEEP(*(.ofs6)) - } > OFS - .ofs7 0xFE7F5D64: AT(0xFE7F5D64) - { - KEEP(*(.ofs7)) - } > OFS - .ofs8 0xFE7F5D70: AT(0xFE7F5D70) - { - KEEP(*(.ofs8)) - } > OFS -} diff --git a/tinyusb/hw/bsp/rx/boards/rx65n_target/rx65n_target.c b/tinyusb/hw/bsp/rx/boards/rx65n_target/rx65n_target.c deleted file mode 100755 index 20867455..00000000 --- a/tinyusb/hw/bsp/rx/boards/rx65n_target/rx65n_target.c +++ /dev/null @@ -1,320 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Koji Kitayama - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* How to connect JLink and RX65n Target and option board - * (For original comment https://github.com/hathach/tinyusb/pull/922#issuecomment-869786131) - * - * To enable JTAG, RX65N requires following connections on main board. - * - short EJ2 jumper header, to disable onboard E2L. - * - short EMLE(J1-2) and 3V3(J1-14 or J2-10), to enable In-Circuit Emulator. - * - * Note: For RX65N-Cloud-Kit, the option board's JTAG pins to some switches or floating. - * To use JLink with the option board, I think some further modifications will be necessary. - * - * | Function | RX65N pin | main board | option board | JLink connector | - * |:---------:|:----------:|:----------:|:------------:|:---------------:| - * | 3V3 | VCC | J1-14 | CN5-6 | 1 | - * | TRST | P34 | J1-16 | CN5-7 | 3 | - * | GND | VSS | J1-12 | CN5-5 | 4 | - * | TDI | P30 | J1-20 | CN5-10 | 5 | - * | TMS | P31 | J1-19 | USER_SW | 7 | - * | TCK/FINEC | P27 | J1-21 | N/A | 9 | - * | TDO | P26 | J1-22 | CN5-9 | 13 | - * | nRES | RES# | J1-10 | RESET_SW | 15 | - * - * JLink firmware needs to update to V6.96 or newer version to avoid - * [a bug](https://forum.segger.com/index.php/Thread/7758-SOLVED-Bug-in-JLink-from-V6-88b-regarding-RX65N) - * regarding downloading. - */ - -#include "bsp/board.h" -#include "iodefine.h" -#include "interrupt_handlers.h" - -#define IRQ_PRIORITY_CMT0 5 -#define IRQ_PRIORITY_USBI0 6 -#define IRQ_PRIORITY_SCI5 5 - -#define SYSTEM_PRCR_PRC1 (1<<1) -#define SYSTEM_PRCR_PRKEY (0xA5u<<8) - -#define CMT_PCLK 60000000 -#define CMT_CMCR_CKS_DIV_128 2 -#define CMT_CMCR_CMIE (1<<6) -#define MPC_PFS_ISEL (1<<6) - -#define SCI_PCLK 60000000 -#define SCI_SSR_FER (1<<4) -#define SCI_SSR_ORER (1<<5) - -#define SCI_SCR_TEIE (1u<<2) -#define SCI_SCR_RE (1u<<4) -#define SCI_SCR_TE (1u<<5) -#define SCI_SCR_RIE (1u<<6) -#define SCI_SCR_TIE (1u<<7) -#define INT_Excep_SCI5_TEI5 INT_Excep_ICU_GROUPBL0 - -#define IRQ_USB0_USBI0 62 -#define SLIBR_USBI0 SLIBR185 -#define IPR_USB0_USBI0 IPR_PERIB_INTB185 -#define INT_Excep_USB0_USBI0 INT_Excep_PERIB_INTB185 - -void HardwareSetup(void) -{ - FLASH.ROMCIV.WORD = 1; - while (FLASH.ROMCIV.WORD) ; - FLASH.ROMCE.WORD = 1; - while (!FLASH.ROMCE.WORD) ; - - SYSTEM.PRCR.WORD = 0xA503u; - if (!SYSTEM.RSTSR1.BYTE) { - RTC.RCR4.BYTE = 0; - RTC.RCR3.BYTE = 12; - while (12 != RTC.RCR3.BYTE) ; - } - SYSTEM.SOSCCR.BYTE = 1; - - if (SYSTEM.HOCOCR.BYTE) { - SYSTEM.HOCOCR.BYTE = 0; - while (!SYSTEM.OSCOVFSR.BIT.HCOVF) ; - } - SYSTEM.PLLCR.WORD = 0x1D10u; /* HOCO x 15 */ - SYSTEM.PLLCR2.BYTE = 0; - while (!SYSTEM.OSCOVFSR.BIT.PLOVF) ; - - SYSTEM.SCKCR.LONG = 0x21C11222u; - SYSTEM.SCKCR2.WORD = 0x0041u; - SYSTEM.ROMWT.BYTE = 0x02u; - while (0x02u != SYSTEM.ROMWT.BYTE) ; - SYSTEM.SCKCR3.WORD = 0x400u; - SYSTEM.PRCR.WORD = 0xA500u; -} - -//--------------------------------------------------------------------+ -// SCI handling -//--------------------------------------------------------------------+ -typedef struct { - uint8_t *buf; - uint32_t cnt; -} sci_buf_t; -static volatile sci_buf_t sci_buf[2]; - -void INT_Excep_SCI5_TXI5(void) -{ - uint8_t *buf = sci_buf[0].buf; - uint32_t cnt = sci_buf[0].cnt; - - if (!buf || !cnt) { - SCI5.SCR.BYTE &= ~(SCI_SCR_TEIE | SCI_SCR_TE | SCI_SCR_TIE); - return; - } - SCI5.TDR = *buf; - if (--cnt) { - ++buf; - } else { - buf = NULL; - SCI5.SCR.BIT.TIE = 0; - SCI5.SCR.BIT.TEIE = 1; - } - sci_buf[0].buf = buf; - sci_buf[0].cnt = cnt; -} - -void INT_Excep_SCI5_TEI5(void) -{ - SCI5.SCR.BYTE &= ~(SCI_SCR_TEIE | SCI_SCR_TE | SCI_SCR_TIE); -} - -void INT_Excep_SCI5_RXI5(void) -{ - uint8_t *buf = sci_buf[1].buf; - uint32_t cnt = sci_buf[1].cnt; - - if (!buf || !cnt || - (SCI5.SSR.BYTE & (SCI_SSR_FER | SCI_SSR_ORER))) { - sci_buf[1].buf = NULL; - SCI5.SSR.BYTE = 0; - SCI5.SCR.BYTE &= ~(SCI_SCR_RE | SCI_SCR_RIE); - return; - } - *buf = SCI5.RDR; - if (--cnt) { - ++buf; - } else { - buf = NULL; - SCI5.SCR.BYTE &= ~(SCI_SCR_RE | SCI_SCR_RIE); - } - sci_buf[1].buf = buf; - sci_buf[1].cnt = cnt; -} - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void INT_Excep_USB0_USBI0(void) -{ - tud_int_handler(0); -} - -void board_init(void) -{ - /* setup software configurable interrupts */ - ICU.SLIBR_USBI0.BYTE = IRQ_USB0_USBI0; - ICU.SLIPRCR.BYTE = 1; - -#if CFG_TUSB_OS == OPT_OS_NONE - /* Enable CMT0 */ - SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY | SYSTEM_PRCR_PRC1; - MSTP(CMT0) = 0; - SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY; - /* Setup 1ms tick timer */ - CMT0.CMCNT = 0; - CMT0.CMCOR = CMT_PCLK / 1000 / 128; - CMT0.CMCR.WORD = CMT_CMCR_CMIE | CMT_CMCR_CKS_DIV_128; - IR(CMT0, CMI0) = 0; - IPR(CMT0, CMI0) = IRQ_PRIORITY_CMT0; - IEN(CMT0, CMI0) = 1; - CMT.CMSTR0.BIT.STR0 = 1; -#endif - - /* Unlock MPC registers */ - MPC.PWPR.BIT.B0WI = 0; - MPC.PWPR.BIT.PFSWE = 1; - // SW PB1 - PORTB.PMR.BIT.B1 = 0U; - PORTB.PDR.BIT.B1 = 0U; - // LED PD6 - PORTD.PODR.BIT.B6 = 1U; - PORTD.ODR1.BIT.B4 = 1U; - PORTD.PMR.BIT.B6 = 0U; - PORTD.PDR.BIT.B6 = 1U; - /* UART TXD5 => PA4, RXD5 => PA3 */ - PORTA.PMR.BIT.B4 = 1U; - PORTA.PCR.BIT.B4 = 1U; - MPC.PA4PFS.BYTE = 0b01010; - PORTA.PMR.BIT.B3 = 1U; - MPC.PA5PFS.BYTE = 0b01010; - /* USB VBUS -> P16 */ - PORT1.PMR.BIT.B6 = 1U; - MPC.P16PFS.BYTE = MPC_PFS_ISEL | 0b10001; - /* Lock MPC registers */ - MPC.PWPR.BIT.PFSWE = 0; - MPC.PWPR.BIT.B0WI = 1; - - /* Enable SCI5 */ - SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY | SYSTEM_PRCR_PRC1; - MSTP(SCI5) = 0; - SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY; - SCI5.SEMR.BIT.ABCS = 1; - SCI5.SEMR.BIT.BGDM = 1; - SCI5.BRR = (SCI_PCLK / (8 * 115200)) - 1; - IR(SCI5, RXI5) = 0; - IR(SCI5, TXI5) = 0; - IS(SCI5, TEI5) = 0; - IR(ICU, GROUPBL0) = 0; - IPR(SCI5, RXI5) = IRQ_PRIORITY_SCI5; - IPR(SCI5, TXI5) = IRQ_PRIORITY_SCI5; - IPR(ICU,GROUPBL0) = IRQ_PRIORITY_SCI5; - IEN(SCI5, RXI5) = 1; - IEN(SCI5, TXI5) = 1; - IEN(ICU,GROUPBL0) = 1; - EN(SCI5, TEI5) = 1; - - /* setup USBI0 interrupt. */ - IR(USB0, USBI0) = 0; - IPR(USB0, USBI0) = IRQ_PRIORITY_USBI0; -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - PORTD.PODR.BIT.B6 = state ? 0 : 1; -} - -uint32_t board_button_read(void) -{ - return PORTB.PIDR.BIT.B1 ? 0 : 1; -} - -int board_uart_read(uint8_t* buf, int len) -{ - sci_buf[1].buf = buf; - sci_buf[1].cnt = len; - SCI5.SCR.BYTE |= SCI_SCR_RE | SCI_SCR_RIE; - while (SCI5.SCR.BIT.RE) ; - return len - sci_buf[1].cnt; -} - -int board_uart_write(void const *buf, int len) -{ - sci_buf[0].buf = (uint8_t*)buf; - sci_buf[0].cnt = len; - SCI5.SCR.BYTE |= SCI_SCR_TE | SCI_SCR_TIE; - while (SCI5.SCR.BIT.TE) ; - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void INT_Excep_CMT0_CMI0(void) -{ - ++system_ticks; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#else -uint32_t SystemCoreClock = 120000000; -#endif - -int close(int fd) -{ - (void)fd; - return -1; -} -int fstat(int fd, void *pstat) -{ - (void)fd; - (void)pstat; - return 0; -} -off_t lseek(int fd, off_t pos, int whence) -{ - (void)fd; - (void)pos; - (void)whence; - return 0; -} -int isatty(int fd) -{ - (void)fd; - return 1; -} diff --git a/tinyusb/hw/bsp/rx/family.mk b/tinyusb/hw/bsp/rx/family.mk deleted file mode 100755 index 5a828171..00000000 --- a/tinyusb/hw/bsp/rx/family.mk +++ /dev/null @@ -1,32 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/renesas/rx - -# Cross Compiler for RX -CROSS_COMPILE = rx-elf- - -include $(TOP)/$(BOARD_PATH)/board.mk - -CFLAGS += \ - -nostartfiles \ - -ffunction-sections \ - -fdata-sections \ - -fshort-enums \ - -mlittle-endian-data \ - -DSSIZE_MAX=__INT_MAX__ - -SRC_C += \ - src/portable/renesas/usba/dcd_usba.c \ - $(MCU_DIR)/vects.c - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(MCU_DIR) - -SRC_S += $(MCU_DIR)/start.S - -$(BUILD)/$(PROJECT).mot: $(BUILD)/$(PROJECT).elf - @echo CREATE $@ - $(OBJCOPY) -O srec -I elf32-rx-be-ns $^ $@ - -# flash using rfp-cli -flash-rfp: $(BUILD)/$(PROJECT).mot - rfp-cli -device rx65x -tool e2l -if fine -fo id FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF -auth id FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF -auto $^ diff --git a/tinyusb/hw/bsp/samd11/boards/luna_d11/board.h b/tinyusb/hw/bsp/samd11/boards/luna_d11/board.h deleted file mode 100755 index 1bda9293..00000000 --- a/tinyusb/hw/bsp/samd11/boards/luna_d11/board.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN PIN_PA27 // pin PA22 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PIN PIN_PA16 // pin PB22 -#define BUTTON_STATE_ACTIVE 0 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd11/boards/luna_d11/board.mk b/tinyusb/hw/bsp/samd11/boards/luna_d11/board.mk deleted file mode 100755 index ad9cfb25..00000000 --- a/tinyusb/hw/bsp/samd11/boards/luna_d11/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -D__SAMD11D14AM__ - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/samd11d14am_flash.ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD11D14 - -# flash using dfu-util -flash: $(BUILD)/$(PROJECT).bin - dfu-util -a 0 -d 1d50:615c -D $< || dfu-util -a 0 -d 16d0:05a5 -D $< diff --git a/tinyusb/hw/bsp/samd11/boards/luna_d11/samd11d14am_flash.ld b/tinyusb/hw/bsp/samd11/boards/luna_d11/samd11d14am_flash.ld deleted file mode 100755 index cb633c19..00000000 --- a/tinyusb/hw/bsp/samd11/boards/luna_d11/samd11d14am_flash.ld +++ /dev/null @@ -1,144 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD11D14AM - * - * Copyright (c) 2018 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 4K, LENGTH = 0x00004000 - 4K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00001000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x400; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/samd11/boards/samd11_xplained/board.h b/tinyusb/hw/bsp/samd11/boards/samd11_xplained/board.h deleted file mode 100755 index cfeac673..00000000 --- a/tinyusb/hw/bsp/samd11/boards/samd11_xplained/board.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN PIN_PA16 // pin PA22 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PIN PIN_PA14 // pin PB22 -#define BUTTON_STATE_ACTIVE 0 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd11/boards/samd11_xplained/board.mk b/tinyusb/hw/bsp/samd11/boards/samd11_xplained/board.mk deleted file mode 100755 index e351cf0b..00000000 --- a/tinyusb/hw/bsp/samd11/boards/samd11_xplained/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -D__SAMD11D14AM__ - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/samd11d14am_flash.ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD11D14 - -# flash using edbg -flash: $(BUILD)/$(PROJECT).bin - edbg -b -t samd11 -e -pv -f $< diff --git a/tinyusb/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld b/tinyusb/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld deleted file mode 100755 index 8b3124c0..00000000 --- a/tinyusb/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld +++ /dev/null @@ -1,144 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD11D14AM - * - * Copyright (c) 2018 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00004000 - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00001000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x400; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/samd11/family.c b/tinyusb/hw/bsp/samd11/family.c deleted file mode 100755 index 8d963397..00000000 --- a/tinyusb/hw/bsp/samd11/family.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "sam.h" -#include "bsp/board.h" -#include "board.h" - -#include "hal/include/hal_gpio.h" -#include "hal/include/hal_init.h" -#include "hri/hri_nvmctrl_d11.h" - -#include "hpl/gclk/hpl_gclk_base.h" -#include "hpl_pm_config.h" -#include "hpl/pm/hpl_pm_base.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_Handler(void) -{ - tud_int_handler(0); -} - - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ - -/* Referenced GCLKs, should be initialized firstly */ -#define _GCLK_INIT_1ST (1 << 0 | 1 << 1) - -/* Not referenced GCLKs, initialized last */ -#define _GCLK_INIT_LAST (~_GCLK_INIT_1ST) - -void board_init(void) -{ - // Clock init ( follow hpl_init.c ) - hri_nvmctrl_set_CTRLB_RWS_bf(NVMCTRL, 2); - - _pm_init(); - _sysctrl_init_sources(); -#if _GCLK_INIT_1ST - _gclk_init_generators_by_fref(_GCLK_INIT_1ST); -#endif - _sysctrl_init_referenced_generators(); - _gclk_init_generators_by_fref(_GCLK_INIT_LAST); - - // 1ms tick timer (samd SystemCoreClock may not correct) - SystemCoreClock = CONF_CPU_FREQUENCY; - SysTick_Config(CONF_CPU_FREQUENCY / 1000); - - // Led init - gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); - gpio_set_pin_level(LED_PIN, 0); - - // Button init - gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); - gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP); - - /* USB Clock init - * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock - * for low speed and full speed operation. */ - _pm_enable_bus_clock(PM_BUS_APBB, USB); - _pm_enable_bus_clock(PM_BUS_AHB, USB); - _gclk_enable_channel(USB_GCLK_ID, GCLK_CLKCTRL_GEN_GCLK0_Val); - - // USB Pin Init - gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA24, false); - gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); - gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA25, false); - gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); - - gpio_set_pin_function(PIN_PA24, PINMUX_PA24G_USB_DM); - gpio_set_pin_function(PIN_PA25, PINMUX_PA25G_USB_DP); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - gpio_set_pin_level(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == gpio_get_pin_level(BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE - -volatile uint32_t system_ticks = 0; - -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} - -void _init(void) -{ - // This _init() standin makes certain GCC environments happier. - // They expect the main binary to have a constructor called _init; but don't provide a weak default. - // Providing an empty constructor satisfies this odd case, and doesn't harm anything. -} - - -#endif diff --git a/tinyusb/hw/bsp/samd11/family.mk b/tinyusb/hw/bsp/samd11/family.mk deleted file mode 100755 index 032d11b9..00000000 --- a/tinyusb/hw/bsp/samd11/family.mk +++ /dev/null @@ -1,37 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/microchip - -include $(TOP)/$(BOARD_PATH)/board.mk - -CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ - -nostdlib -nostartfiles \ - -DCONF_DFLL_OVERWRITE_CALIBRATION=0 \ - -DOSC32K_OVERWRITE_CALIBRATION=0 \ - -DCFG_TUSB_MCU=OPT_MCU_SAMD11 - -SRC_C += \ - src/portable/microchip/samd/dcd_samd.c \ - hw/mcu/microchip/samd11/gcc/gcc/startup_samd11.c \ - hw/mcu/microchip/samd11/gcc/system_samd11.c \ - hw/mcu/microchip/samd11/hpl/gclk/hpl_gclk.c \ - hw/mcu/microchip/samd11/hpl/pm/hpl_pm.c \ - hw/mcu/microchip/samd11/hpl/sysctrl/hpl_sysctrl.c \ - hw/mcu/microchip/samd11/hal/src/hal_atomic.c - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/hw/mcu/microchip/samd11/ \ - $(TOP)/hw/mcu/microchip/samd11/config \ - $(TOP)/hw/mcu/microchip/samd11/include \ - $(TOP)/hw/mcu/microchip/samd11/hal/include \ - $(TOP)/hw/mcu/microchip/samd11/hal/utils/include \ - $(TOP)/hw/mcu/microchip/samd11/hpl/pm/ \ - $(TOP)/hw/mcu/microchip/samd11/hpl/port \ - $(TOP)/hw/mcu/microchip/samd11/hri \ - $(TOP)/hw/mcu/microchip/samd11/CMSIS/Include \ - $(TOP)/hw/mcu/microchip/samd11/CMSIS/Core/Include - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM0 diff --git a/tinyusb/hw/bsp/samd21/boards/atsamd21_xpro/board.h b/tinyusb/hw/bsp/samd21/boards/atsamd21_xpro/board.h deleted file mode 100755 index a3e03997..00000000 --- a/tinyusb/hw/bsp/samd21/boards/atsamd21_xpro/board.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN (32 + 30) // PB30 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PIN (0 + 15) // PA15 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 4 -#define UART_TX_PIN 5 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd21/boards/atsamd21_xpro/board.mk b/tinyusb/hw/bsp/samd21/boards/atsamd21_xpro/board.mk deleted file mode 100755 index 5cd82735..00000000 --- a/tinyusb/hw/bsp/samd21/boards/atsamd21_xpro/board.mk +++ /dev/null @@ -1,10 +0,0 @@ -CFLAGS += -D__SAMD21J18A__ - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/samd21j18a_flash.ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD21J18 - -# flash using jlink -flash: flash-jlink diff --git a/tinyusb/hw/bsp/samd21/boards/atsamd21_xpro/samd21j18a_flash.ld b/tinyusb/hw/bsp/samd21/boards/atsamd21_xpro/samd21j18a_flash.ld deleted file mode 100755 index e2f93416..00000000 --- a/tinyusb/hw/bsp/samd21/boards/atsamd21_xpro/samd21j18a_flash.ld +++ /dev/null @@ -1,144 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD21J18A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000 - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/samd21/boards/circuitplayground_express/board.h b/tinyusb/hw/bsp/samd21/boards/circuitplayground_express/board.h deleted file mode 100755 index 2d7da1c0..00000000 --- a/tinyusb/hw/bsp/samd21/boards/circuitplayground_express/board.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN 17 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN 28 -#define BUTTON_STATE_ACTIVE 1 - -// UART -#define UART_RX_PIN 4 -#define UART_TX_PIN 5 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd21/boards/circuitplayground_express/board.mk b/tinyusb/hw/bsp/samd21/boards/circuitplayground_express/board.mk deleted file mode 100755 index bb426cda..00000000 --- a/tinyusb/hw/bsp/samd21/boards/circuitplayground_express/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -CFLAGS += -D__SAMD21G18A__ - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD21G18 - -flash: flash-bossac diff --git a/tinyusb/hw/bsp/samd21/boards/circuitplayground_express/circuitplayground_express.ld b/tinyusb/hw/bsp/samd21/boards/circuitplayground_express/circuitplayground_express.ld deleted file mode 100755 index f0c93340..00000000 --- a/tinyusb/hw/bsp/samd21/boards/circuitplayground_express/circuitplayground_express.ld +++ /dev/null @@ -1,146 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD21G18A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/samd21/boards/feather_m0_express/board.h b/tinyusb/hw/bsp/samd21/boards/feather_m0_express/board.h deleted file mode 100755 index b9292b9a..00000000 --- a/tinyusb/hw/bsp/samd21/boards/feather_m0_express/board.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN 17 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN 15 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 4 -#define UART_TX_PIN 5 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd21/boards/feather_m0_express/board.mk b/tinyusb/hw/bsp/samd21/boards/feather_m0_express/board.mk deleted file mode 100755 index bb426cda..00000000 --- a/tinyusb/hw/bsp/samd21/boards/feather_m0_express/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -CFLAGS += -D__SAMD21G18A__ - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD21G18 - -flash: flash-bossac diff --git a/tinyusb/hw/bsp/samd21/boards/feather_m0_express/feather_m0_express.ld b/tinyusb/hw/bsp/samd21/boards/feather_m0_express/feather_m0_express.ld deleted file mode 100755 index f0c93340..00000000 --- a/tinyusb/hw/bsp/samd21/boards/feather_m0_express/feather_m0_express.ld +++ /dev/null @@ -1,146 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD21G18A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/samd21/boards/itsybitsy_m0/board.h b/tinyusb/hw/bsp/samd21/boards/itsybitsy_m0/board.h deleted file mode 100755 index 177fb695..00000000 --- a/tinyusb/hw/bsp/samd21/boards/itsybitsy_m0/board.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN 17 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN 21 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 4 -#define UART_TX_PIN 5 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd21/boards/itsybitsy_m0/board.mk b/tinyusb/hw/bsp/samd21/boards/itsybitsy_m0/board.mk deleted file mode 100755 index bb426cda..00000000 --- a/tinyusb/hw/bsp/samd21/boards/itsybitsy_m0/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -CFLAGS += -D__SAMD21G18A__ - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD21G18 - -flash: flash-bossac diff --git a/tinyusb/hw/bsp/samd21/boards/itsybitsy_m0/itsybitsy_m0.ld b/tinyusb/hw/bsp/samd21/boards/itsybitsy_m0/itsybitsy_m0.ld deleted file mode 100755 index f0c93340..00000000 --- a/tinyusb/hw/bsp/samd21/boards/itsybitsy_m0/itsybitsy_m0.ld +++ /dev/null @@ -1,146 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD21G18A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/samd21/boards/luna_d21/board.h b/tinyusb/hw/bsp/samd21/boards/luna_d21/board.h deleted file mode 100755 index 2e0a2a60..00000000 --- a/tinyusb/hw/bsp/samd21/boards/luna_d21/board.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN PIN_PA22 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN PIN_PB22 -#define BUTTON_STATE_ACTIVE 0 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd21/boards/luna_d21/board.mk b/tinyusb/hw/bsp/samd21/boards/luna_d21/board.mk deleted file mode 100755 index 5beb5e02..00000000 --- a/tinyusb/hw/bsp/samd21/boards/luna_d21/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -D__SAMD21G18A__ - -LD_FILE = $(BOARD_PATH)/samd21g18a_flash.ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD21G18 - -# flash using dfu-util -flash: $(BUILD)/$(PROJECT).bin - dfu-util -a 0 -d 1d50:615c -D $< || dfu-util -a 0 -d 16d0:05a5 -D $< - diff --git a/tinyusb/hw/bsp/samd21/boards/luna_d21/samd21g18a_flash.ld b/tinyusb/hw/bsp/samd21/boards/luna_d21/samd21g18a_flash.ld deleted file mode 100755 index 15859303..00000000 --- a/tinyusb/hw/bsp/samd21/boards/luna_d21/samd21g18a_flash.ld +++ /dev/null @@ -1,144 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD21G18A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 4K, LENGTH = 0x00040000 - 4K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/samd21/boards/metro_m0_express/board.h b/tinyusb/hw/bsp/samd21/boards/metro_m0_express/board.h deleted file mode 100755 index b9292b9a..00000000 --- a/tinyusb/hw/bsp/samd21/boards/metro_m0_express/board.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN 17 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN 15 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 4 -#define UART_TX_PIN 5 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd21/boards/metro_m0_express/board.mk b/tinyusb/hw/bsp/samd21/boards/metro_m0_express/board.mk deleted file mode 100755 index bb426cda..00000000 --- a/tinyusb/hw/bsp/samd21/boards/metro_m0_express/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -CFLAGS += -D__SAMD21G18A__ - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD21G18 - -flash: flash-bossac diff --git a/tinyusb/hw/bsp/samd21/boards/metro_m0_express/metro_m0_express.ld b/tinyusb/hw/bsp/samd21/boards/metro_m0_express/metro_m0_express.ld deleted file mode 100755 index f0c93340..00000000 --- a/tinyusb/hw/bsp/samd21/boards/metro_m0_express/metro_m0_express.ld +++ /dev/null @@ -1,146 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD21G18A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/samd21/boards/seeeduino_xiao/board.h b/tinyusb/hw/bsp/samd21/boards/seeeduino_xiao/board.h deleted file mode 100755 index 0d1e9cef..00000000 --- a/tinyusb/hw/bsp/samd21/boards/seeeduino_xiao/board.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN 17 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PIN 9 // PA4 pin D1 on seed input -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 4 -#define UART_TX_PIN 5 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd21/boards/seeeduino_xiao/board.mk b/tinyusb/hw/bsp/samd21/boards/seeeduino_xiao/board.mk deleted file mode 100755 index 54591b3a..00000000 --- a/tinyusb/hw/bsp/samd21/boards/seeeduino_xiao/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -CFLAGS += -D__SAMD21G18A__ - -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD21G18 - -# flash using jlink -flash: flash-jlink diff --git a/tinyusb/hw/bsp/samd21/boards/seeeduino_xiao/seeeduino_xiao.ld b/tinyusb/hw/bsp/samd21/boards/seeeduino_xiao/seeeduino_xiao.ld deleted file mode 100755 index cf11c4c3..00000000 --- a/tinyusb/hw/bsp/samd21/boards/seeeduino_xiao/seeeduino_xiao.ld +++ /dev/null @@ -1,146 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD21G18A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K /* 8K offset to preserve bootloader */ - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/samd21/family.c b/tinyusb/hw/bsp/samd21/family.c deleted file mode 100755 index eb5b5586..00000000 --- a/tinyusb/hw/bsp/samd21/family.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "sam.h" -#include "bsp/board.h" -#include "board.h" - -#include "hal/include/hal_gpio.h" -#include "hal/include/hal_init.h" -#include "hri/hri_nvmctrl_d21.h" - -#include "hpl/gclk/hpl_gclk_base.h" -#include "hpl_pm_config.h" -#include "hpl/pm/hpl_pm_base.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_Handler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ - -/* Referenced GCLKs, should be initialized firstly */ -#define _GCLK_INIT_1ST (1 << 0 | 1 << 1) - -/* Not referenced GCLKs, initialized last */ -#define _GCLK_INIT_LAST (~_GCLK_INIT_1ST) - -void board_init(void) -{ - // Clock init ( follow hpl_init.c ) - hri_nvmctrl_set_CTRLB_RWS_bf(NVMCTRL, 2); - - _pm_init(); - _sysctrl_init_sources(); -#if _GCLK_INIT_1ST - _gclk_init_generators_by_fref(_GCLK_INIT_1ST); -#endif - _sysctrl_init_referenced_generators(); - _gclk_init_generators_by_fref(_GCLK_INIT_LAST); - - // Update SystemCoreClock since it is hard coded with asf4 and not correct - // Init 1ms tick timer (samd SystemCoreClock may not correct) - SystemCoreClock = CONF_CPU_FREQUENCY; - SysTick_Config(CONF_CPU_FREQUENCY / 1000); - - // Led init - gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); - board_led_write(false); - - // Button init - gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); - gpio_set_pin_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULL_DOWN : GPIO_PULL_UP); - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - - /* USB Clock init - * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock - * for low speed and full speed operation. */ - _pm_enable_bus_clock(PM_BUS_APBB, USB); - _pm_enable_bus_clock(PM_BUS_AHB, USB); - _gclk_enable_channel(USB_GCLK_ID, GCLK_CLKCTRL_GEN_GCLK0_Val); - - // USB Pin Init - gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA24, false); - gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); - gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA25, false); - gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); - - gpio_set_pin_function(PIN_PA24, PINMUX_PA24G_USB_DM); - gpio_set_pin_function(PIN_PA25, PINMUX_PA25G_USB_DP); - - // Output 500hz PWM on D12 (PA19 - TCC0 WO[3]) so we can validate the GCLK0 clock speed with a Saleae. - _pm_enable_bus_clock(PM_BUS_APBC, TCC0); - TCC0->PER.bit.PER = 48000000 / 1000; - TCC0->CC[3].bit.CC = 48000000 / 2000; - TCC0->CTRLA.bit.ENABLE = true; - - gpio_set_pin_function(PIN_PA19, PINMUX_PA19F_TCC0_WO3); - _gclk_enable_channel(TCC0_GCLK_ID, GCLK_CLKCTRL_GEN_GCLK0_Val); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - gpio_set_pin_level(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == gpio_get_pin_level(BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/tinyusb/hw/bsp/samd21/family.mk b/tinyusb/hw/bsp/samd21/family.mk deleted file mode 100755 index f1b063f2..00000000 --- a/tinyusb/hw/bsp/samd21/family.mk +++ /dev/null @@ -1,46 +0,0 @@ -UF2_FAMILY_ID = 0x68ed2b88 -DEPS_SUBMODULES += hw/mcu/microchip - -include $(TOP)/$(BOARD_PATH)/board.mk - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ - -nostdlib -nostartfiles \ - -DCONF_DFLL_OVERWRITE_CALIBRATION=0 \ - -DCFG_TUSB_MCU=OPT_MCU_SAMD21 - -SRC_C += \ - src/portable/microchip/samd/dcd_samd.c \ - hw/mcu/microchip/samd21/gcc/gcc/startup_samd21.c \ - hw/mcu/microchip/samd21/gcc/system_samd21.c \ - hw/mcu/microchip/samd21/hpl/gclk/hpl_gclk.c \ - hw/mcu/microchip/samd21/hpl/pm/hpl_pm.c \ - hw/mcu/microchip/samd21/hpl/sysctrl/hpl_sysctrl.c \ - hw/mcu/microchip/samd21/hal/src/hal_atomic.c - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/hw/mcu/microchip/samd21/ \ - $(TOP)/hw/mcu/microchip/samd21/config \ - $(TOP)/hw/mcu/microchip/samd21/include \ - $(TOP)/hw/mcu/microchip/samd21/hal/include \ - $(TOP)/hw/mcu/microchip/samd21/hal/utils/include \ - $(TOP)/hw/mcu/microchip/samd21/hpl/pm/ \ - $(TOP)/hw/mcu/microchip/samd21/hpl/port \ - $(TOP)/hw/mcu/microchip/samd21/hri \ - $(TOP)/hw/mcu/microchip/samd21/CMSIS/Include - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM0 - -# flash using bossac at least version 1.8 -# can be found in arduino15/packages/arduino/tools/bossac/ -# Add it to your PATH or change BOSSAC variable to match your installation -BOSSAC = bossac - -flash-bossac: $(BUILD)/$(PROJECT).bin - @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) - $(BOSSAC) --port=$(SERIAL) -U -i --offset=0x2000 -e -w $^ -R diff --git a/tinyusb/hw/bsp/samd51/boards/feather_m4_express/board.h b/tinyusb/hw/bsp/samd51/boards/feather_m4_express/board.h deleted file mode 100755 index 1d5ed804..00000000 --- a/tinyusb/hw/bsp/samd51/boards/feather_m4_express/board.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN 23 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN 16 // D5 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_TX_PIN (32 + 17) -#define UART_RX_PIN (32 + 16) - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd51/boards/feather_m4_express/board.mk b/tinyusb/hw/bsp/samd51/boards/feather_m4_express/board.mk deleted file mode 100755 index a8a98a98..00000000 --- a/tinyusb/hw/bsp/samd51/boards/feather_m4_express/board.mk +++ /dev/null @@ -1,8 +0,0 @@ -CFLAGS += -D__SAMD51J19A__ - -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD51J19 - -flash: flash-bossac diff --git a/tinyusb/hw/bsp/samd51/boards/feather_m4_express/feather_m4_express.ld b/tinyusb/hw/bsp/samd51/boards/feather_m4_express/feather_m4_express.ld deleted file mode 100755 index f1a021d7..00000000 --- a/tinyusb/hw/bsp/samd51/boards/feather_m4_express/feather_m4_express.ld +++ /dev/null @@ -1,166 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD51G19A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 16K, LENGTH = 0x00080000 - 16K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00030000 - bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 - qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0xC000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - .bkupram (NOLOAD): - { - . = ALIGN(8); - _sbkupram = .; - *(.bkupram .bkupram.*); - . = ALIGN(8); - _ebkupram = .; - } > bkupram - - .qspi (NOLOAD): - { - . = ALIGN(8); - _sqspi = .; - *(.qspi .qspi.*); - . = ALIGN(8); - _eqspi = .; - } > qspi - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.h b/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.h deleted file mode 100755 index 0760d428..00000000 --- a/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN 22 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN 18 // D5 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_TX_PIN 16 -#define UART_RX_PIN 17 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.mk b/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.mk deleted file mode 100755 index 57a680e9..00000000 --- a/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -CFLAGS += -D__SAMD51J19A__ - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD51J19 - -flash: flash-bossac diff --git a/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/itsybitsy_m4.ld b/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/itsybitsy_m4.ld deleted file mode 100755 index f1a021d7..00000000 --- a/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/itsybitsy_m4.ld +++ /dev/null @@ -1,166 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD51G19A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 16K, LENGTH = 0x00080000 - 16K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00030000 - bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 - qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0xC000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - .bkupram (NOLOAD): - { - . = ALIGN(8); - _sbkupram = .; - *(.bkupram .bkupram.*); - . = ALIGN(8); - _ebkupram = .; - } > bkupram - - .qspi (NOLOAD): - { - . = ALIGN(8); - _sqspi = .; - *(.qspi .qspi.*); - . = ALIGN(8); - _eqspi = .; - } > qspi - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/samd51/boards/metro_m4_express/board.h b/tinyusb/hw/bsp/samd51/boards/metro_m4_express/board.h deleted file mode 100755 index 9bb5f815..00000000 --- a/tinyusb/hw/bsp/samd51/boards/metro_m4_express/board.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN 16 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN (32+14) // D5 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_TX_PIN 23 -#define UART_RX_PIN 22 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd51/boards/metro_m4_express/board.mk b/tinyusb/hw/bsp/samd51/boards/metro_m4_express/board.mk deleted file mode 100755 index d7953cc2..00000000 --- a/tinyusb/hw/bsp/samd51/boards/metro_m4_express/board.mk +++ /dev/null @@ -1,10 +0,0 @@ -CFLAGS += -D__SAMD51J19A__ - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD51J19 - -flash: flash-bossac - diff --git a/tinyusb/hw/bsp/samd51/boards/metro_m4_express/metro_m4_express.ld b/tinyusb/hw/bsp/samd51/boards/metro_m4_express/metro_m4_express.ld deleted file mode 100755 index f1a021d7..00000000 --- a/tinyusb/hw/bsp/samd51/boards/metro_m4_express/metro_m4_express.ld +++ /dev/null @@ -1,166 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD51G19A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 16K, LENGTH = 0x00080000 - 16K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00030000 - bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 - qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0xC000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - .bkupram (NOLOAD): - { - . = ALIGN(8); - _sbkupram = .; - *(.bkupram .bkupram.*); - . = ALIGN(8); - _ebkupram = .; - } > bkupram - - .qspi (NOLOAD): - { - . = ALIGN(8); - _sqspi = .; - *(.qspi .qspi.*); - . = ALIGN(8); - _eqspi = .; - } > qspi - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/samd51/boards/pybadge/board.h b/tinyusb/hw/bsp/samd51/boards/pybadge/board.h deleted file mode 100755 index 1d5ed804..00000000 --- a/tinyusb/hw/bsp/samd51/boards/pybadge/board.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN 23 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN 16 // D5 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_TX_PIN (32 + 17) -#define UART_RX_PIN (32 + 16) - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd51/boards/pybadge/board.mk b/tinyusb/hw/bsp/samd51/boards/pybadge/board.mk deleted file mode 100755 index a8a98a98..00000000 --- a/tinyusb/hw/bsp/samd51/boards/pybadge/board.mk +++ /dev/null @@ -1,8 +0,0 @@ -CFLAGS += -D__SAMD51J19A__ - -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD51J19 - -flash: flash-bossac diff --git a/tinyusb/hw/bsp/samd51/boards/pybadge/pybadge.ld b/tinyusb/hw/bsp/samd51/boards/pybadge/pybadge.ld deleted file mode 100755 index f1a021d7..00000000 --- a/tinyusb/hw/bsp/samd51/boards/pybadge/pybadge.ld +++ /dev/null @@ -1,166 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD51G19A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 16K, LENGTH = 0x00080000 - 16K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00030000 - bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 - qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0xC000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - .bkupram (NOLOAD): - { - . = ALIGN(8); - _sbkupram = .; - *(.bkupram .bkupram.*); - . = ALIGN(8); - _ebkupram = .; - } > bkupram - - .qspi (NOLOAD): - { - . = ALIGN(8); - _sqspi = .; - *(.qspi .qspi.*); - . = ALIGN(8); - _eqspi = .; - } > qspi - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/samd51/boards/pyportal/board.h b/tinyusb/hw/bsp/samd51/boards/pyportal/board.h deleted file mode 100755 index 9e51ded3..00000000 --- a/tinyusb/hw/bsp/samd51/boards/pyportal/board.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN (32+23) -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN (32+22) // D2 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_TX_PIN (32 + 13) -#define UART_RX_PIN (32 + 12) - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd51/boards/pyportal/board.mk b/tinyusb/hw/bsp/samd51/boards/pyportal/board.mk deleted file mode 100755 index a8a98a98..00000000 --- a/tinyusb/hw/bsp/samd51/boards/pyportal/board.mk +++ /dev/null @@ -1,8 +0,0 @@ -CFLAGS += -D__SAMD51J19A__ - -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD51J19 - -flash: flash-bossac diff --git a/tinyusb/hw/bsp/samd51/boards/pyportal/pyportal.ld b/tinyusb/hw/bsp/samd51/boards/pyportal/pyportal.ld deleted file mode 100755 index f1a021d7..00000000 --- a/tinyusb/hw/bsp/samd51/boards/pyportal/pyportal.ld +++ /dev/null @@ -1,166 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD51G19A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 16K, LENGTH = 0x00080000 - 16K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00030000 - bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 - qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0xC000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - .bkupram (NOLOAD): - { - . = ALIGN(8); - _sbkupram = .; - *(.bkupram .bkupram.*); - . = ALIGN(8); - _ebkupram = .; - } > bkupram - - .qspi (NOLOAD): - { - . = ALIGN(8); - _sqspi = .; - *(.qspi .qspi.*); - . = ALIGN(8); - _eqspi = .; - } > qspi - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/samd51/family.c b/tinyusb/hw/bsp/samd51/family.c deleted file mode 100755 index 020e638c..00000000 --- a/tinyusb/hw/bsp/samd51/family.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "sam.h" -#include "bsp/board.h" -#include "board.h" - -#include "hal/include/hal_gpio.h" -#include "hal/include/hal_init.h" -#include "hpl/gclk/hpl_gclk_base.h" -#include "hpl_mclk_config.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_0_Handler (void) -{ - tud_int_handler(0); -} - -void USB_1_Handler (void) -{ - tud_int_handler(0); -} - -void USB_2_Handler (void) -{ - tud_int_handler(0); -} - -void USB_3_Handler (void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ - -/* Referenced GCLKs, should be initialized firstly */ -#define _GCLK_INIT_1ST 0xFFFFFFFF - -/* Not referenced GCLKs, initialized last */ -#define _GCLK_INIT_LAST (~_GCLK_INIT_1ST) - -void board_init(void) -{ - // Clock init ( follow hpl_init.c ) - hri_nvmctrl_set_CTRLA_RWS_bf(NVMCTRL, 0); - - _osc32kctrl_init_sources(); - _oscctrl_init_sources(); - _mclk_init(); -#if _GCLK_INIT_1ST - _gclk_init_generators_by_fref(_GCLK_INIT_1ST); -#endif - _oscctrl_init_referenced_generators(); - _gclk_init_generators_by_fref(_GCLK_INIT_LAST); - - // Update SystemCoreClock since it is hard coded with asf4 and not correct - // Init 1ms tick timer (samd SystemCoreClock may not correct) - SystemCoreClock = CONF_CPU_FREQUENCY; - SysTick_Config(CONF_CPU_FREQUENCY / 1000); - - // Led init - gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); - gpio_set_pin_level(LED_PIN, 0); - - // Button init - gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); - gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP); - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_3_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - - /* USB Clock init - * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock - * for low speed and full speed operation. */ - hri_gclk_write_PCHCTRL_reg(GCLK, USB_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK1_Val | GCLK_PCHCTRL_CHEN); - hri_mclk_set_AHBMASK_USB_bit(MCLK); - hri_mclk_set_APBBMASK_USB_bit(MCLK); - - // USB Pin Init - gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA24, false); - gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); - gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA25, false); - gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); - - gpio_set_pin_function(PIN_PA24, PINMUX_PA24H_USB_DM); - gpio_set_pin_function(PIN_PA25, PINMUX_PA25H_USB_DP); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - gpio_set_pin_level(LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - // button is active low - return gpio_get_pin_level(BUTTON_PIN) ? 0 : 1; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/tinyusb/hw/bsp/samd51/family.mk b/tinyusb/hw/bsp/samd51/family.mk deleted file mode 100755 index f4e260fb..00000000 --- a/tinyusb/hw/bsp/samd51/family.mk +++ /dev/null @@ -1,49 +0,0 @@ -UF2_FAMILY_ID = 0x55114460 -DEPS_SUBMODULES += hw/mcu/microchip - -include $(TOP)/$(BOARD_PATH)/board.mk - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib -nostartfiles \ - -DCFG_TUSB_MCU=OPT_MCU_SAMD51 - -CFLAGS += -Wno-error=undef - -SRC_C += \ - src/portable/microchip/samd/dcd_samd.c \ - hw/mcu/microchip/samd51/gcc/gcc/startup_samd51.c \ - hw/mcu/microchip/samd51/gcc/system_samd51.c \ - hw/mcu/microchip/samd51/hpl/gclk/hpl_gclk.c \ - hw/mcu/microchip/samd51/hpl/mclk/hpl_mclk.c \ - hw/mcu/microchip/samd51/hpl/osc32kctrl/hpl_osc32kctrl.c \ - hw/mcu/microchip/samd51/hpl/oscctrl/hpl_oscctrl.c \ - hw/mcu/microchip/samd51/hal/src/hal_atomic.c - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/hw/mcu/microchip/samd51/ \ - $(TOP)/hw/mcu/microchip/samd51/config \ - $(TOP)/hw/mcu/microchip/samd51/include \ - $(TOP)/hw/mcu/microchip/samd51/hal/include \ - $(TOP)/hw/mcu/microchip/samd51/hal/utils/include \ - $(TOP)/hw/mcu/microchip/samd51/hpl/port \ - $(TOP)/hw/mcu/microchip/samd51/hri \ - $(TOP)/hw/mcu/microchip/samd51/CMSIS/Include - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM4F - -# flash using bossac at least version 1.8 -# can be found in arduino15/packages/arduino/tools/bossac/ -# Add it to your PATH or change BOSSAC variable to match your installation -BOSSAC = bossac - -flash-bossac: $(BUILD)/$(PROJECT).bin - @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) - $(BOSSAC) --port=$(SERIAL) -U -i --offset=0x4000 -e -w $^ -R diff --git a/tinyusb/hw/bsp/same54xplainedpro/board.mk b/tinyusb/hw/bsp/same54xplainedpro/board.mk deleted file mode 100755 index 16ac786d..00000000 --- a/tinyusb/hw/bsp/same54xplainedpro/board.mk +++ /dev/null @@ -1,46 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/microchip - -CONF_CPU_FREQUENCY ?= 48000000 - -CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mlong-calls \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib -nostartfiles \ - -D__SAME54P20A__ \ - -DCONF_CPU_FREQUENCY=$(CONF_CPU_FREQUENCY) \ - -DCFG_TUSB_MCU=OPT_MCU_SAME5X \ - -DBOARD_NAME="\"Microchip SAM E54 Xplained Pro\"" - - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/same54p20a_flash.ld - -SRC_C += \ - src/portable/microchip/samd/dcd_samd.c \ - hw/mcu/microchip/same54/gcc/gcc/startup_same54.c \ - hw/mcu/microchip/same54/gcc/system_same54.c \ - hw/mcu/microchip/same54/hal/utils/src/utils_syscalls.c - -INC += \ - $(TOP)/hw/mcu/microchip/same54/ \ - $(TOP)/hw/mcu/microchip/same54/config \ - $(TOP)/hw/mcu/microchip/same54/include \ - $(TOP)/hw/mcu/microchip/same54/hal/include \ - $(TOP)/hw/mcu/microchip/same54/hal/utils/include \ - $(TOP)/hw/mcu/microchip/same54/hpl/port \ - $(TOP)/hw/mcu/microchip/same54/hri \ - $(TOP)/hw/mcu/microchip/same54/CMSIS/Include - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = ATSAME54P20 - -# flash using edbg from https://github.com/ataradov/edbg -flash: $(BUILD)/$(PROJECT).bin - edbg --verbose -t same54 -pv -f $< diff --git a/tinyusb/hw/bsp/same54xplainedpro/same54p20a_flash.ld b/tinyusb/hw/bsp/same54xplainedpro/same54p20a_flash.ld deleted file mode 100755 index 97072bfe..00000000 --- a/tinyusb/hw/bsp/same54xplainedpro/same54p20a_flash.ld +++ /dev/null @@ -1,163 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAME54P20A - * - * Copyright (c) 2019 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00100000 - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00040000 - bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 - qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x10000; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - .bkupram (NOLOAD): - { - . = ALIGN(8); - _sbkupram = .; - *(.bkupram .bkupram.*); - . = ALIGN(8); - _ebkupram = .; - } > bkupram - - .qspi (NOLOAD): - { - . = ALIGN(8); - _sqspi = .; - *(.qspi .qspi.*); - . = ALIGN(8); - _eqspi = .; - } > qspi - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/same54xplainedpro/same54p20a_sram.ld b/tinyusb/hw/bsp/same54xplainedpro/same54p20a_sram.ld deleted file mode 100755 index 6219f4af..00000000 --- a/tinyusb/hw/bsp/same54xplainedpro/same54p20a_sram.ld +++ /dev/null @@ -1,162 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal SRAM on the SAME54P20A - * - * Copyright (c) 2019 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00040000 - bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 - qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x10000; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > ram - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > ram - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - .bkupram (NOLOAD): - { - . = ALIGN(8); - _sbkupram = .; - *(.bkupram .bkupram.*); - . = ALIGN(8); - _ebkupram = .; - } > bkupram - - .qspi (NOLOAD): - { - . = ALIGN(8); - _sqspi = .; - *(.qspi .qspi.*); - . = ALIGN(8); - _eqspi = .; - } > qspi - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/same54xplainedpro/same54xplainedpro.c b/tinyusb/hw/bsp/same54xplainedpro/same54xplainedpro.c deleted file mode 100755 index 4c38fc6e..00000000 --- a/tinyusb/hw/bsp/same54xplainedpro/same54xplainedpro.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021 Jean Gressmann <jean@0x42.de> - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#include <sam.h> -#include "bsp/board.h" - -#include <hal/include/hal_gpio.h> - - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_0_Handler(void) -{ - tud_int_handler(0); -} - -void USB_1_Handler(void) -{ - tud_int_handler(0); -} - -void USB_2_Handler(void) -{ - tud_int_handler(0); -} - -void USB_3_Handler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ -#define LED_PIN PIN_PC18 -#define BUTTON_PIN PIN_PB31 -#define BOARD_SERCOM SERCOM2 - -/** Initializes the clocks from the external 12 MHz crystal - * - * The goal of this setup is to preserve the second PLL - * for the application code while still having a reasonable - * 48 MHz clock for USB / UART. - * - * GCLK0: CONF_CPU_FREQUENCY (default 120 MHz) from PLL0 - * GCLK1: unused - * GCLK2: 12 MHz from XOSC1 - * DFLL48M: closed loop from GLCK2 - * GCLK3: 48 MHz - */ -static inline void init_clock_xtal(void) -{ - /* configure for a 12MHz crystal connected to XIN1/XOUT1 */ - OSCCTRL->XOSCCTRL[1].reg = - OSCCTRL_XOSCCTRL_STARTUP(6) | // 1.953 ms - OSCCTRL_XOSCCTRL_RUNSTDBY | - OSCCTRL_XOSCCTRL_ENALC | - OSCCTRL_XOSCCTRL_IMULT(4) | OSCCTRL_XOSCCTRL_IPTAT(3) | // 8MHz to 16MHz - OSCCTRL_XOSCCTRL_XTALEN | - OSCCTRL_XOSCCTRL_ENABLE; - while(0 == OSCCTRL->STATUS.bit.XOSCRDY1); - - OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(2) | OSCCTRL_DPLLCTRLB_REFCLK_XOSC1; /* 12MHz / 6 = 2Mhz, input = XOSC1 */ - OSCCTRL->Dpll[0].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR((CONF_CPU_FREQUENCY / 1000000 / 2) - 1); /* multiply to get CONF_CPU_FREQUENCY (default = 120MHz) */ - OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; - while(0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */ - - /* configure clock-generator 0 to use DPLL0 as source -> GCLK0 is used for the core */ - GCLK->GENCTRL[0].reg = - GCLK_GENCTRL_DIV(0) | - GCLK_GENCTRL_RUNSTDBY | - GCLK_GENCTRL_GENEN | - GCLK_GENCTRL_SRC_DPLL0 | - GCLK_GENCTRL_IDC; - while(1 == GCLK->SYNCBUSY.bit.GENCTRL0); /* wait for the synchronization between clock domains to be complete */ - - // configure GCLK2 for 12MHz from XOSC1 - GCLK->GENCTRL[2].reg = - GCLK_GENCTRL_DIV(0) | - GCLK_GENCTRL_RUNSTDBY | - GCLK_GENCTRL_GENEN | - GCLK_GENCTRL_SRC_XOSC1 | - GCLK_GENCTRL_IDC; - while(1 == GCLK->SYNCBUSY.bit.GENCTRL2); /* wait for the synchronization between clock domains to be complete */ - - /* setup DFLL48M to use GLCK2 */ - GCLK->PCHCTRL[OSCCTRL_GCLK_ID_DFLL48].reg = GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN; - - OSCCTRL->DFLLCTRLA.reg = 0; - while(1 == OSCCTRL->DFLLSYNC.bit.ENABLE); - - OSCCTRL->DFLLCTRLB.reg = OSCCTRL_DFLLCTRLB_MODE | OSCCTRL_DFLLCTRLB_WAITLOCK; - OSCCTRL->DFLLMUL.bit.MUL = 4; // 4 * 12MHz -> 48MHz - - OSCCTRL->DFLLCTRLA.reg = - OSCCTRL_DFLLCTRLA_ENABLE | - OSCCTRL_DFLLCTRLA_RUNSTDBY; - while(1 == OSCCTRL->DFLLSYNC.bit.ENABLE); - - // setup 48 MHz GCLK3 from DFLL48M - GCLK->GENCTRL[3].reg = - GCLK_GENCTRL_DIV(0) | - GCLK_GENCTRL_RUNSTDBY | - GCLK_GENCTRL_GENEN | - GCLK_GENCTRL_SRC_DFLL | - GCLK_GENCTRL_IDC; - while(1 == GCLK->SYNCBUSY.bit.GENCTRL3); -} - -/* Initialize SERCOM2 for 115200 bps 8N1 using a 48 MHz clock */ -static inline void uart_init(void) -{ - gpio_set_pin_function(PIN_PB24, PINMUX_PB24D_SERCOM2_PAD1); - gpio_set_pin_function(PIN_PB25, PINMUX_PB25D_SERCOM2_PAD0); - - MCLK->APBBMASK.bit.SERCOM2_ = 1; - GCLK->PCHCTRL[SERCOM2_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK0 | GCLK_PCHCTRL_CHEN; - - BOARD_SERCOM->USART.CTRLA.bit.SWRST = 1; /* reset and disable SERCOM -> enable configuration */ - while (BOARD_SERCOM->USART.SYNCBUSY.bit.SWRST); - - BOARD_SERCOM->USART.CTRLA.reg = - SERCOM_USART_CTRLA_SAMPR(0) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */ - SERCOM_USART_CTRLA_SAMPA(0) | /* 16x over sampling */ - SERCOM_USART_CTRLA_FORM(0) | /* 0x0 USART frame, 0x1 USART frame with parity, ... */ - SERCOM_USART_CTRLA_DORD | /* LSB first */ - SERCOM_USART_CTRLA_MODE(1) | /* 0x0 USART with external clock, 0x1 USART with internal clock */ - SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */ - SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */ - - BOARD_SERCOM->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */ - SERCOM_USART_CTRLB_TXEN | /* transmitter enabled */ - SERCOM_USART_CTRLB_RXEN; /* receiver enabled */ - // BOARD_SERCOM->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(0) | SERCOM_USART_BAUD_FRAC_BAUD(26); /* 48000000/(16*115200) = 26.041666667 */ - BOARD_SERCOM->USART.BAUD.reg = SERCOM_USART_BAUD_BAUD(63019); /* 65536*(1−16*115200/48000000) */ - - BOARD_SERCOM->USART.CTRLA.bit.ENABLE = 1; /* activate SERCOM */ - while (BOARD_SERCOM->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */ -} - -static inline void uart_send_buffer(uint8_t const *text, size_t len) -{ - for (size_t i = 0; i < len; ++i) { - BOARD_SERCOM->USART.DATA.reg = text[i]; - while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0); - } -} - -static inline void uart_send_str(const char* text) -{ - while (*text) { - BOARD_SERCOM->USART.DATA.reg = *text++; - while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0); - } -} - - -void board_init(void) -{ - // Uncomment this line and change the GCLK for UART/USB to run off the XTAL. - // init_clock_xtal(); - - SystemCoreClock = CONF_CPU_FREQUENCY; - -#if CFG_TUSB_OS == OPT_OS_NONE - SysTick_Config(CONF_CPU_FREQUENCY / 1000); -#endif - - uart_init(); - -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " UART initialized\n"); - tu_printf(BOARD_NAME " reset cause %#02x\n", RSTC->RCAUSE.reg); -#endif - - // LED0 init - gpio_set_pin_function(LED_PIN, GPIO_PIN_FUNCTION_OFF); - gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); - board_led_write(0); - -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " LED pin configured\n"); -#endif - - // BTN0 init - gpio_set_pin_function(BUTTON_PIN, GPIO_PIN_FUNCTION_OFF); - gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); - gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP); - -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " Button pin configured\n"); -#endif - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_3_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - - -#if TUSB_OPT_DEVICE_ENABLED -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " USB device enabled\n"); -#endif - - /* USB clock init - * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock - * for low speed and full speed operation. - */ - hri_gclk_write_PCHCTRL_reg(GCLK, USB_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK0_Val | GCLK_PCHCTRL_CHEN); - hri_mclk_set_AHBMASK_USB_bit(MCLK); - hri_mclk_set_APBBMASK_USB_bit(MCLK); - - // USB pin init - gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA24, false); - gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); - gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA25, false); - gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); - - gpio_set_pin_function(PIN_PA24, PINMUX_PA24H_USB_DM); - gpio_set_pin_function(PIN_PA25, PINMUX_PA25H_USB_DP); - - -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " USB device configured\n"); -#endif -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - gpio_set_pin_level(LED_PIN, !state); -} - -uint32_t board_button_read(void) -{ - return (PORT->Group[1].IN.reg & 0x80000000) != 0x80000000; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - if (len < 0) { - uart_send_str(buf); - } else { - uart_send_buffer(buf, len); - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/tinyusb/hw/bsp/same70_xplained/board.mk b/tinyusb/hw/bsp/same70_xplained/board.mk deleted file mode 100755 index c9bc0cea..00000000 --- a/tinyusb/hw/bsp/same70_xplained/board.mk +++ /dev/null @@ -1,56 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/microchip - -CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m7 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib -nostartfiles \ - -D__SAME70Q21B__ \ - -DCFG_TUSB_MCU=OPT_MCU_SAMX7X - -# suppress following warnings from mcu driver -CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align - -ASF_DIR = hw/mcu/microchip/same70 - -# All source paths should be relative to the top level. -LD_FILE = $(ASF_DIR)/same70b/gcc/gcc/same70q21b_flash.ld - -SRC_C += \ - src/portable/microchip/samx7x/dcd_samx7x.c \ - $(ASF_DIR)/same70b/gcc/gcc/startup_same70q21b.c \ - $(ASF_DIR)/same70b/gcc/system_same70q21b.c \ - $(ASF_DIR)/hpl/core/hpl_init.c \ - $(ASF_DIR)/hpl/usart/hpl_usart.c \ - $(ASF_DIR)/hpl/pmc/hpl_pmc.c \ - $(ASF_DIR)/hal/src/hal_usart_async.c \ - $(ASF_DIR)/hal/src/hal_io.c \ - $(ASF_DIR)/hal/src/hal_atomic.c \ - $(ASF_DIR)/hal/utils/src/utils_ringbuffer.c - -INC += \ - $(TOP)/hw/bsp/$(BOARD) \ - $(TOP)/$(ASF_DIR) \ - $(TOP)/$(ASF_DIR)/config \ - $(TOP)/$(ASF_DIR)/same70b/include \ - $(TOP)/$(ASF_DIR)/hal/include \ - $(TOP)/$(ASF_DIR)/hal/utils/include \ - $(TOP)/$(ASF_DIR)/hpl/core \ - $(TOP)/$(ASF_DIR)/hpl/pio \ - $(TOP)/$(ASF_DIR)/hpl/pmc \ - $(TOP)/$(ASF_DIR)/hri \ - $(TOP)/$(ASF_DIR)/CMSIS/Core/Include - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM7 - -# For flash-jlink target -JLINK_DEVICE = SAME70Q21B - -# flash using edbg from https://github.com/ataradov/edbg -# Note: SAME70's GPNVM1 must be set to 1 to boot from flash with -# edbg -t same70 -F w0,1,1 -flash: $(BUILD)/$(PROJECT).bin - edbg --verbose -t same70 -pv -f $< diff --git a/tinyusb/hw/bsp/same70_xplained/hpl_pmc_config.h b/tinyusb/hw/bsp/same70_xplained/hpl_pmc_config.h deleted file mode 100755 index 387aaa5d..00000000 --- a/tinyusb/hw/bsp/same70_xplained/hpl_pmc_config.h +++ /dev/null @@ -1,1053 +0,0 @@ -/* Auto-generated config file hpl_pmc_config.h */ -#ifndef HPL_PMC_CONFIG_H -#define HPL_PMC_CONFIG_H - -// <<< Use Configuration Wizard in Context Menu >>> - -#include <peripheral_clk_config.h> - -#define CLK_SRC_OPTION_OSC32K 0 -#define CLK_SRC_OPTION_XOSC32K 1 -#define CLK_SRC_OPTION_OSC12M 2 -#define CLK_SRC_OPTION_XOSC20M 3 - -#define CLK_SRC_OPTION_SLCK 0 -#define CLK_SRC_OPTION_MAINCK 1 -#define CLK_SRC_OPTION_PLLACK 2 -#define CLK_SRC_OPTION_UPLLCKDIV 3 -#define CLK_SRC_OPTION_MCK 4 - -#define CLK_SRC_OPTION_UPLLCK 3 - -#define CONF_RC_4M 0 -#define CONF_RC_8M 1 -#define CONF_RC_12M 2 - -#define CONF_XOSC32K_NO_BYPASS 0 -#define CONF_XOSC32K_BYPASS 1 - -#define CONF_XOSC20M_NO_BYPASS 0 -#define CONF_XOSC20M_BYPASS 1 - -// <e> Clock_SLCK configuration -// <i> Indicates whether SLCK configuration is enabled or not -// <id> enable_clk_gen_slck -#ifndef CONF_CLK_SLCK_CONFIG -#define CONF_CLK_SLCK_CONFIG 1 -#endif - -//<h> Clock Generator -// <y> clock generator SLCK source - -// <CLK_SRC_OPTION_OSC32K"> 32kHz High Accuracy Internal Oscillator (OSC32K) - -// <CLK_SRC_OPTION_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K) - -// <i> This defines the clock source for SLCK -// <id> clk_gen_slck_oscillator -#ifndef CONF_CLK_GEN_SLCK_SRC -#define CONF_CLK_GEN_SLCK_SRC CLK_SRC_OPTION_OSC32K -#endif - -// <q> Enable Clock_SLCK -// <i> Indicates whether SLCK is enabled or disable -// <id> clk_gen_slck_arch_enable -#ifndef CONF_CLK_SLCK_ENABLE -#define CONF_CLK_SLCK_ENABLE 1 -#endif - -// </h> - -// <h> - -// </h> -// </e>// <e> Clock_MAINCK configuration -// <i> Indicates whether MAINCK configuration is enabled or not -// <id> enable_clk_gen_mainck -#ifndef CONF_CLK_MAINCK_CONFIG -#define CONF_CLK_MAINCK_CONFIG 1 -#endif - -//<h> Clock Generator -// <y> clock generator MAINCK source - -// <CLK_SRC_OPTION_OSC12M"> Embedded 4/8/12MHz RC Oscillator (OSC12M) - -// <CLK_SRC_OPTION_XOSC20M"> External 3-20MHz Oscillator (XOSC20M) - -// <i> This defines the clock source for MAINCK -// <id> clk_gen_mainck_oscillator -#ifndef CONF_CLK_GEN_MAINCK_SRC -#define CONF_CLK_GEN_MAINCK_SRC CLK_SRC_OPTION_XOSC20M -#endif - -// <q> Enable Clock_MAINCK -// <i> Indicates whether MAINCK is enabled or disable -// <id> clk_gen_mainck_arch_enable -#ifndef CONF_CLK_MAINCK_ENABLE -#define CONF_CLK_MAINCK_ENABLE 1 -#endif - -// <q> Enable Main Clock Failure Detection -// <i> Indicates whether Main Clock Failure Detection is enabled or disable. -// <i> The 4/8/12 MHz RC oscillator must be selected as the source of MAINCK. -// <id> clk_gen_cfden_enable -#ifndef CONF_CLK_CFDEN_ENABLE -#define CONF_CLK_CFDEN_ENABLE 0 -#endif - -// </h> - -// <h> - -// </h> -// </e>// <e> Clock_MCKR configuration -// <i> Indicates whether MCKR configuration is enabled or not -// <id> enable_clk_gen_mckr -#ifndef CONF_CLK_MCKR_CONFIG -#define CONF_CLK_MCKR_CONFIG 1 -#endif - -//<h> Clock Generator -// <y> clock generator MCKR source - -// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) - -// <CLK_SRC_OPTION_MAINCK"> Main Clock (MAINCK) - -// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) - -// <CLK_SRC_OPTION_UPLLCKDIV"> UDPLL with Divider (MCKR UPLLDIV2) - -// <i> This defines the clock source for MCKR -// <id> clk_gen_mckr_oscillator -#ifndef CONF_CLK_GEN_MCKR_SRC -#define CONF_CLK_GEN_MCKR_SRC CLK_SRC_OPTION_PLLACK -#endif - -// <q> Enable Clock_MCKR -// <i> Indicates whether MCKR is enabled or disable -// <id> clk_gen_mckr_arch_enable -#ifndef CONF_CLK_MCKR_ENABLE -#define CONF_CLK_MCKR_ENABLE 1 -#endif - -// </h> - -// <h> - -// <o> Master Clock Prescaler -// <0=> 1 -// <1=> 2 -// <2=> 4 -// <3=> 8 -// <4=> 16 -// <5=> 32 -// <6=> 64 -// <7=> 3 -// <i> Select the clock prescaler. -// <id> mckr_presc -#ifndef CONF_MCKR_PRESC -#define CONF_MCKR_PRESC 0 -#endif - -// </h> -// </e>// <e> Clock_MCK configuration -// <i> Indicates whether MCK configuration is enabled or not -// <id> enable_clk_gen_mck -#ifndef CONF_CLK_MCK_CONFIG -#define CONF_CLK_MCK_CONFIG 1 -#endif - -//<h> Clock Generator -// <y> clock generator MCK source - -// <CLK_SRC_OPTION_MCKR"> Master Clock Controller (PMC_MCKR) - -// <i> This defines the clock source for MCK -// <id> clk_gen_mck_oscillator -#ifndef CONF_CLK_GEN_MCK_SRC -#define CONF_CLK_GEN_MCK_SRC CLK_SRC_OPTION_MCKR -#endif - -// </h> - -// <h> - -//<o> Master Clock Controller Divider MCK divider -// <0=> 1 -// <1=> 2 -// <3=> 3 -// <2=> 4 -// <i> Select the master clock divider. -// <id> mck_div -#ifndef CONF_MCK_DIV -#define CONF_MCK_DIV 1 -#endif - -// </h> -// </e>// <e> Clock_SYSTICK configuration -// <i> Indicates whether SYSTICK configuration is enabled or not -// <id> enable_clk_gen_systick -#ifndef CONF_CLK_SYSTICK_CONFIG -#define CONF_CLK_SYSTICK_CONFIG 1 -#endif - -//<h> Clock Generator -// <y> clock generator SYSTICK source - -// <CLK_SRC_OPTION_MCKR"> Master Clock Controller (PMC_MCKR) - -// <i> This defines the clock source for SYSTICK -// <id> clk_gen_systick_oscillator -#ifndef CONF_CLK_GEN_SYSTICK_SRC -#define CONF_CLK_GEN_SYSTICK_SRC CLK_SRC_OPTION_MCKR -#endif - -// </h> - -// <h> - -// <o> Systick clock divider -// <8=> 8 -// <i> Select systick clock divider -// <id> systick_clock_div -#ifndef CONF_SYSTICK_DIV -#define CONF_SYSTICK_DIV 8 -#endif - -// </h> -// </e>// <e> Clock_FCLK configuration -// <i> Indicates whether FCLK configuration is enabled or not -// <id> enable_clk_gen_fclk -#ifndef CONF_CLK_FCLK_CONFIG -#define CONF_CLK_FCLK_CONFIG 1 -#endif - -//<h> Clock Generator -// <y> clock generator FCLK source - -// <CLK_SRC_OPTION_MCKR"> Master Clock Controller (PMC_MCKR) - -// <i> This defines the clock source for FCLK -// <id> clk_gen_fclk_oscillator -#ifndef CONF_CLK_GEN_FCLK_SRC -#define CONF_CLK_GEN_FCLK_SRC CLK_SRC_OPTION_MCKR -#endif - -// </h> - -// <h> - -// </h> -// </e>// <e> Clock_GCLK0 configuration -// <i> Indicates whether GCLK0 configuration is enabled or not -// <id> enable_clk_gen_gclk0 -#ifndef CONF_CLK_GCLK0_CONFIG -#define CONF_CLK_GCLK0_CONFIG 1 -#endif - -//<h> Clock Generator -// <y> clock generator GCLK0 source - -// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) - -// <CLK_SRC_OPTION_MAINCK"> Main Clock (MAINCK) - -// <CLK_SRC_OPTION_UPLLCK"> USB 480M Clock (UPLLCK) - -// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) - -// <CLK_SRC_OPTION_MCK"> Master Clock (MCK) - -// <i> This defines the clock source for GCLK0 -// <id> clk_gen_gclk0_oscillator -#ifndef CONF_CLK_GEN_GCLK0_SRC -#define CONF_CLK_GEN_GCLK0_SRC CLK_SRC_OPTION_MCK -#endif - -// <q> Enable Clock_GCLK0 -// <i> Indicates whether GCLK0 is enabled or disable -// <id> clk_gen_gclk0_arch_enable -#ifndef CONF_CLK_GCLK0_ENABLE -#define CONF_CLK_GCLK0_ENABLE 1 -#endif - -// </h> - -// <h> -// <q> Enable GCLK0 GCLKEN -// <i> Indicates whether GCLK0 GCLKEN is enabled or disable -// <id> gclk0_gclken_enable -#ifndef CONF_GCLK0_GCLKEN_ENABLE -#define CONF_GCLK0_GCLKEN_ENABLE 0 -#endif - -// <o> Generic Clock GCLK0 divider <1-256> -// <i> Select the clock divider (divider = GCLKDIV + 1). -// <id> gclk0_div -#ifndef CONF_GCLK0_DIV -#define CONF_GCLK0_DIV 2 -#endif - -// </h> -// </e>// <e> Clock_GCLK1 configuration -// <i> Indicates whether GCLK1 configuration is enabled or not -// <id> enable_clk_gen_gclk1 -#ifndef CONF_CLK_GCLK1_CONFIG -#define CONF_CLK_GCLK1_CONFIG 1 -#endif - -//<h> Clock Generator -// <y> clock generator GCLK1 source - -// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) - -// <CLK_SRC_OPTION_MAINCK"> Main Clock (MAINCK) - -// <CLK_SRC_OPTION_UPLLCK"> USB 480M Clock (UPLLCK) - -// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) - -// <CLK_SRC_OPTION_MCK"> Master Clock (MCK) - -// <i> This defines the clock source for GCLK1 -// <id> clk_gen_gclk1_oscillator -#ifndef CONF_CLK_GEN_GCLK1_SRC -#define CONF_CLK_GEN_GCLK1_SRC CLK_SRC_OPTION_PLLACK -#endif - -// <q> Enable Clock_GCLK1 -// <i> Indicates whether GCLK1 is enabled or disable -// <id> clk_gen_gclk1_arch_enable -#ifndef CONF_CLK_GCLK1_ENABLE -#define CONF_CLK_GCLK1_ENABLE 1 -#endif - -// </h> - -// <h> -// <q> Enable GCLK1 GCLKEN -// <i> Indicates whether GCLK1 GCLKEN is enabled or disable -// <id> gclk1_gclken_enable -#ifndef CONF_GCLK1_GCLKEN_ENABLE -#define CONF_GCLK1_GCLKEN_ENABLE 0 -#endif - -// <o> Generic Clock GCLK1 divider <1-256> -// <i> Select the clock divider (divider = GCLKDIV + 1). -// <id> gclk1_div -#ifndef CONF_GCLK1_DIV -#define CONF_GCLK1_DIV 3 -#endif - -// </h> -// </e>// <e> Clock_PCK0 configuration -// <i> Indicates whether PCK0 configuration is enabled or not -// <id> enable_clk_gen_pck0 -#ifndef CONF_CLK_PCK0_CONFIG -#define CONF_CLK_PCK0_CONFIG 1 -#endif - -//<h> Clock Generator -// <y> clock generator PCK0 source - -// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) - -// <CLK_SRC_OPTION_MAINCK"> Main Clock (MAINCK) - -// <CLK_SRC_OPTION_UPLLCKDIV"> UDPLL with Divider (MCKR UPLLDIV2) - -// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) - -// <CLK_SRC_OPTION_MCK"> Master Clock (MCK) - -// <i> This defines the clock source for PCK0 -// <id> clk_gen_pck0_oscillator -#ifndef CONF_CLK_GEN_PCK0_SRC -#define CONF_CLK_GEN_PCK0_SRC CLK_SRC_OPTION_MAINCK -#endif - -// <q> Enable Clock_PCK0 -// <i> Indicates whether PCK0 is enabled or disable -// <id> clk_gen_pck0_arch_enable -#ifndef CONF_CLK_PCK0_ENABLE -#define CONF_CLK_PCK0_ENABLE 0 -#endif - -// </h> - -// <h> - -// <o> Programmable Clock Controller Prescaler <1-256> -// <i> Select the clock prescaler (prescaler = PRESC + 1). -// <id> pck0_presc -#ifndef CONF_PCK0_PRESC -#define CONF_PCK0_PRESC 1 -#endif - -// </h> -// </e>// <e> Clock_PCK1 configuration -// <i> Indicates whether PCK1 configuration is enabled or not -// <id> enable_clk_gen_pck1 -#ifndef CONF_CLK_PCK1_CONFIG -#define CONF_CLK_PCK1_CONFIG 1 -#endif - -//<h> Clock Generator -// <y> clock generator PCK1 source - -// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) - -// <CLK_SRC_OPTION_MAINCK"> Main Clock (MAINCK) - -// <CLK_SRC_OPTION_UPLLCKDIV"> UDPLL with Divider (MCKR UPLLDIV2) - -// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) - -// <CLK_SRC_OPTION_MCK"> Master Clock (MCK) - -// <i> This defines the clock source for PCK1 -// <id> clk_gen_pck1_oscillator -#ifndef CONF_CLK_GEN_PCK1_SRC -#define CONF_CLK_GEN_PCK1_SRC CLK_SRC_OPTION_MAINCK -#endif - -// <q> Enable Clock_PCK1 -// <i> Indicates whether PCK1 is enabled or disable -// <id> clk_gen_pck1_arch_enable -#ifndef CONF_CLK_PCK1_ENABLE -#define CONF_CLK_PCK1_ENABLE 0 -#endif - -// </h> - -// <h> - -// <o> Programmable Clock Controller Prescaler <1-256> -// <i> Select the clock prescaler (prescaler = PRESC + 1). -// <id> pck1_presc -#ifndef CONF_PCK1_PRESC -#define CONF_PCK1_PRESC 2 -#endif - -// </h> -// </e>// <e> Clock_PCK2 configuration -// <i> Indicates whether PCK2 configuration is enabled or not -// <id> enable_clk_gen_pck2 -#ifndef CONF_CLK_PCK2_CONFIG -#define CONF_CLK_PCK2_CONFIG 1 -#endif - -//<h> Clock Generator -// <y> clock generator PCK2 source - -// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) - -// <CLK_SRC_OPTION_MAINCK"> Main Clock (MAINCK) - -// <CLK_SRC_OPTION_UPLLCKDIV"> UDPLL with Divider (MCKR UPLLDIV2) - -// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) - -// <CLK_SRC_OPTION_MCK"> Master Clock (MCK) - -// <i> This defines the clock source for PCK2 -// <id> clk_gen_pck2_oscillator -#ifndef CONF_CLK_GEN_PCK2_SRC -#define CONF_CLK_GEN_PCK2_SRC CLK_SRC_OPTION_MAINCK -#endif - -// <q> Enable Clock_PCK2 -// <i> Indicates whether PCK2 is enabled or disable -// <id> clk_gen_pck2_arch_enable -#ifndef CONF_CLK_PCK2_ENABLE -#define CONF_CLK_PCK2_ENABLE 0 -#endif - -// </h> - -// <h> - -// <o> Programmable Clock Controller Prescaler <1-256> -// <i> Select the clock prescaler (prescaler = PRESC + 1). -// <id> pck2_presc -#ifndef CONF_PCK2_PRESC -#define CONF_PCK2_PRESC 3 -#endif - -// </h> -// </e>// <e> Clock_PCK3 configuration -// <i> Indicates whether PCK3 configuration is enabled or not -// <id> enable_clk_gen_pck3 -#ifndef CONF_CLK_PCK3_CONFIG -#define CONF_CLK_PCK3_CONFIG 1 -#endif - -//<h> Clock Generator -// <y> clock generator PCK3 source - -// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) - -// <CLK_SRC_OPTION_MAINCK"> Main Clock (MAINCK) - -// <CLK_SRC_OPTION_UPLLCKDIV"> UDPLL with Divider (MCKR UPLLDIV2) - -// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) - -// <CLK_SRC_OPTION_MCK"> Master Clock (MCK) - -// <i> This defines the clock source for PCK3 -// <id> clk_gen_pck3_oscillator -#ifndef CONF_CLK_GEN_PCK3_SRC -#define CONF_CLK_GEN_PCK3_SRC CLK_SRC_OPTION_MAINCK -#endif - -// <q> Enable Clock_PCK3 -// <i> Indicates whether PCK3 is enabled or disable -// <id> clk_gen_pck3_arch_enable -#ifndef CONF_CLK_PCK3_ENABLE -#define CONF_CLK_PCK3_ENABLE 0 -#endif - -// </h> - -// <h> - -// <o> Programmable Clock Controller Prescaler <1-256> -// <i> Select the clock prescaler (prescaler = PRESC + 1). -// <id> pck3_presc -#ifndef CONF_PCK3_PRESC -#define CONF_PCK3_PRESC 4 -#endif - -// </h> -// </e>// <e> Clock_PCK4 configuration -// <i> Indicates whether PCK4 configuration is enabled or not -// <id> enable_clk_gen_pck4 -#ifndef CONF_CLK_PCK4_CONFIG -#define CONF_CLK_PCK4_CONFIG 1 -#endif - -//<h> Clock Generator -// <y> clock generator PCK4 source - -// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) - -// <CLK_SRC_OPTION_MAINCK"> Main Clock (MAINCK) - -// <CLK_SRC_OPTION_UPLLCKDIV"> UDPLL with Divider (MCKR UPLLDIV2) - -// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) - -// <CLK_SRC_OPTION_MCK"> Master Clock (MCK) - -// <i> This defines the clock source for PCK4 -// <id> clk_gen_pck4_oscillator -#ifndef CONF_CLK_GEN_PCK4_SRC -#define CONF_CLK_GEN_PCK4_SRC CLK_SRC_OPTION_MAINCK -#endif - -// <q> Enable Clock_PCK4 -// <i> Indicates whether PCK4 is enabled or disable -// <id> clk_gen_pck4_arch_enable -#ifndef CONF_CLK_PCK4_ENABLE -#define CONF_CLK_PCK4_ENABLE 0 -#endif - -// </h> - -// <h> - -// <o> Programmable Clock Controller Prescaler <1-256> -// <i> Select the clock prescaler (prescaler = PRESC + 1). -// <id> pck4_presc -#ifndef CONF_PCK4_PRESC -#define CONF_PCK4_PRESC 5 -#endif - -// </h> -// </e>// <e> Clock_PCK5 configuration -// <i> Indicates whether PCK5 configuration is enabled or not -// <id> enable_clk_gen_pck5 -#ifndef CONF_CLK_PCK5_CONFIG -#define CONF_CLK_PCK5_CONFIG 1 -#endif - -//<h> Clock Generator -// <y> clock generator PCK5 source - -// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) - -// <CLK_SRC_OPTION_MAINCK"> Main Clock (MAINCK) - -// <CLK_SRC_OPTION_UPLLCKDIV"> UDPLL with Divider (MCKR UPLLDIV2) - -// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) - -// <CLK_SRC_OPTION_MCK"> Master Clock (MCK) - -// <i> This defines the clock source for PCK5 -// <id> clk_gen_pck5_oscillator -#ifndef CONF_CLK_GEN_PCK5_SRC -#define CONF_CLK_GEN_PCK5_SRC CLK_SRC_OPTION_MAINCK -#endif - -// <q> Enable Clock_PCK5 -// <i> Indicates whether PCK5 is enabled or disable -// <id> clk_gen_pck5_arch_enable -#ifndef CONF_CLK_PCK5_ENABLE -#define CONF_CLK_PCK5_ENABLE 0 -#endif - -// </h> - -// <h> - -// <o> Programmable Clock Controller Prescaler <1-256> -// <i> Select the clock prescaler (prescaler = PRESC + 1). -// <id> pck5_presc -#ifndef CONF_PCK5_PRESC -#define CONF_PCK5_PRESC 6 -#endif - -// </h> -// </e>// <e> Clock_PCK6 configuration -// <i> Indicates whether PCK6 configuration is enabled or not -// <id> enable_clk_gen_pck6 -#ifndef CONF_CLK_PCK6_CONFIG -#define CONF_CLK_PCK6_CONFIG 1 -#endif - -//<h> Clock Generator -// <y> clock generator PCK6 source - -// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) - -// <CLK_SRC_OPTION_MAINCK"> Main Clock (MAINCK) - -// <CLK_SRC_OPTION_UPLLCKDIV"> UDPLL with Divider (MCKR UPLLDIV2) - -// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) - -// <CLK_SRC_OPTION_MCK"> Master Clock (MCK) - -// <i> This defines the clock source for PCK6 -// <id> clk_gen_pck6_oscillator -#ifndef CONF_CLK_GEN_PCK6_SRC -#define CONF_CLK_GEN_PCK6_SRC CLK_SRC_OPTION_MAINCK -#endif - -// <q> Enable Clock_PCK6 -// <i> Indicates whether PCK6 is enabled or disable -// <id> clk_gen_pck6_arch_enable -#ifndef CONF_CLK_PCK6_ENABLE -#define CONF_CLK_PCK6_ENABLE 0 -#endif - -// </h> - -// <h> - -// <o> Programmable Clock Controller Prescaler <1-256> -// <i> Select the clock prescaler (prescaler = PRESC + 1). -// <id> pck6_presc -#ifndef CONF_PCK6_PRESC -#define CONF_PCK6_PRESC 7 -#endif - -// </h> -// </e>// <e> Clock_USB_480M configuration -// <i> Indicates whether USB_480M configuration is enabled or not -// <id> enable_clk_gen_usb_480m -#ifndef CONF_CLK_USB_480M_CONFIG -#define CONF_CLK_USB_480M_CONFIG 1 -#endif - -//<h> Clock Generator -// <y> clock generator USB_480M source - -// <CLK_SRC_OPTION_UPLLCK"> USB 480M Clock (UPLLCK) - -// <i> This defines the clock source for USB_480M -// <id> clk_gen_usb_480m_oscillator -#ifndef CONF_CLK_GEN_USB_480M_SRC -#define CONF_CLK_GEN_USB_480M_SRC CLK_SRC_OPTION_UPLLCK -#endif - -// </h> - -// <h> - -// </h> -// </e>// <e> Clock_USB_48M configuration -// <i> Indicates whether USB_48M configuration is enabled or not -// <id> enable_clk_gen_usb_48m -#ifndef CONF_CLK_USB_48M_CONFIG -#define CONF_CLK_USB_48M_CONFIG 1 -#endif - -//<h> Clock Generator -// <y> clock generator USB_48M source - -// <CLK_SRC_OPTION_PLLACK"> PLLA Clock (PLLACK) - -// <CLK_SRC_OPTION_UPLLCKDIV"> UDPLL with Divider (MCKR UPLLDIV2) - -// <i> This defines the clock source for USB_48M -// <id> clk_gen_usb_48m_oscillator -#ifndef CONF_CLK_GEN_USB_48M_SRC -#define CONF_CLK_GEN_USB_48M_SRC CLK_SRC_OPTION_UPLLCKDIV -#endif - -// <q> Enable Clock_USB_48M -// <i> Indicates whether USB_48M is enabled or disable -// <id> clk_gen_usb_48m_arch_enable -#ifndef CONF_CLK_USB_48M_ENABLE -#define CONF_CLK_USB_48M_ENABLE 1 -#endif - -// </h> - -// <h> - -// <o> USB Clock Controller Divider <1-16> -// <i> Select the USB clock divider (divider = USBDIV + 1). -// <id> usb_48m_div -#ifndef CONF_USB_48M_DIV -#define CONF_USB_48M_DIV 5 -#endif - -// </h> -// </e>// <e> Clock_SLCK2 configuration -// <i> Indicates whether SLCK2 configuration is enabled or not -// <id> enable_clk_gen_slck2 -#ifndef CONF_CLK_SLCK2_CONFIG -#define CONF_CLK_SLCK2_CONFIG 1 -#endif - -//<h> Clock Generator -// <y> clock generator SLCK2 source - -// <CLK_SRC_OPTION_SLCK"> Slow Clock (SLCK) - -// <i> This defines the clock source for SLCK2 -// <id> clk_gen_slck2_oscillator -#ifndef CONF_CLK_GEN_SLCK2_SRC -#define CONF_CLK_GEN_SLCK2_SRC CLK_SRC_OPTION_SLCK -#endif - -// </h> - -// <h> - -// </h> -// </e> - -// <e> System Configuration -// <i> Indicates whether configuration for system is enabled or not -// <id> enable_hclk_clock -#ifndef CONF_SYSTEM_CONFIG -#define CONF_SYSTEM_CONFIG 1 -#endif - -// <h> Processor Clock Settings -// <y> Processor Clock source -// <MCKR"> Master Clock Controller (PMC_MCKR) -// <i> This defines the clock source for the HCLK (Processor clock) -// <id> hclk_clock_source -#ifndef CONF_HCLK_SRC -#define CONF_HCLK_SRC MCKR -#endif - -// <o> Flash Wait State -// <0=> 1 cycle -// <1=> 2 cycles -// <2=> 3 cycles -// <3=> 4 cycles -// <4=> 5 cycles -// <5=> 6 cycles -// <6=> 7 cycles -// <i> This field defines the number of wait states for read and write operations. -// <id> efc_fws -#ifndef CONF_EFC_WAIT_STATE -#define CONF_EFC_WAIT_STATE 5 -#endif - -// </h> -// </e> - -// <e> SysTick Clock -// <id> enable_systick_clk_clock -#ifndef CONF_SYSTICK_CLK_CONFIG -#define CONF_SYSTICK_CLK_CONFIG 1 -#endif - -// <y> SysTick Clock source -// <MCKR"> Master Clock Controller (PMC_MCKR) -// <i> This defines the clock source for the SysTick Clock -// <id> systick_clk_clock_source -#ifndef CONF_SYSTICK_CLK_SRC -#define CONF_SYSTICK_CLK_SRC MCKR -#endif - -// <o> SysTick Clock Divider -// <8=> 8 -// <i> Fixed to 8 if Systick is not using Processor clock -// <id> systick_clk_clock_div -#ifndef CONF_SYSTICK_CLK_DIV -#define CONF_SYSTICK_CLK_DIV 8 -#endif - -// </e> - -// <e> OSC32K Oscillator Configuration -// <i> Indicates whether configuration for OSC32K is enabled or not -// <id> enable_osc32k -#ifndef CONF_OSC32K_CONFIG -#define CONF_OSC32K_CONFIG 1 -#endif - -// <h> OSC32K Oscillator Control -// <q> OSC32K Oscillator Enable -// <i> Indicates whether OSC32K Oscillator is enabled or not -// <id> osc32k_arch_enable -#ifndef CONF_OSC32K_ENABLE -#define CONF_OSC32K_ENABLE 0 -#endif -// </h> -// </e> - -// <e> XOSC32K Oscillator Configuration -// <i> Indicates whether configuration for XOSC32K is enabled or not -// <id> enable_xosc32k -#ifndef CONF_XOSC32K_CONFIG -#define CONF_XOSC32K_CONFIG 0 -#endif - -// <h> XOSC32K Oscillator Control -// <y> Oscillator Bypass Select -// <CONF_XOSC32K_NO_BYPASS"> The 32kHz crystal oscillator is not bypassed. -// <CONF_XOSC32K_BYPASS"> The 32kHz crystal oscillator is bypassed. -// <i> Indicates whether XOSC32K is bypassed. -// <id> xosc32k_bypass -#ifndef CONF_XOSC32K -#define CONF_XOSC32K CONF_XOSC32K_NO_BYPASS -#endif - -// <q> XOSC32K Oscillator Enable -// <i> Indicates whether XOSC32K Oscillator is enabled or not -// <id> xosc32k_arch_enable -#ifndef CONF_XOSC32K_ENABLE -#define CONF_XOSC32K_ENABLE 0 -#endif -// </h> -// </e> - -// <e> OSC12M Oscillator Configuration -// <i> Indicates whether configuration for OSC12M is enabled or not -// <id> enable_osc12m -#ifndef CONF_OSC12M_CONFIG -#define CONF_OSC12M_CONFIG 0 -#endif - -// <h> OSC12M Oscillator Control -// <q> OSC12M Oscillator Enable -// <i> Indicates whether OSC12M Oscillator is enabled or not. -// <id> osc12m_arch_enable -#ifndef CONF_OSC12M_ENABLE -#define CONF_OSC12M_ENABLE 0 -#endif - -// <o> OSC12M selector -// <0=> 4000000 -// <1=> 8000000 -// <2=> 12000000 -// <i> Select the frequency of embedded fast RC oscillator. -// <id> osc12m_selector -#ifndef CONF_OSC12M_SELECTOR -#define CONF_OSC12M_SELECTOR 2 -#endif -// </h> -// </e> - -// <e> XOSC20M Oscillator Configuration -// <i> Indicates whether configuration for XOSC20M is enabled or not. -// <id> enable_xosc20m -#ifndef CONF_XOSC20M_CONFIG -#define CONF_XOSC20M_CONFIG 1 -#endif - -// <h> XOSC20M Oscillator Control -// <o> XOSC20M selector <3000000-20000000> -// <i> Select the frequency of crystal or ceramic resonator oscillator. -// <id> xosc20m_selector -#ifndef CONF_XOSC20M_SELECTOR -#define CONF_XOSC20M_SELECTOR 12000000 -#endif - -// <o> Start up time for the external oscillator (ms): <0-256> -// <i> Select start-up time. -// <id> xosc20m_startup_time -#ifndef CONF_XOSC20M_STARTUP_TIME -#define CONF_XOSC20M_STARTUP_TIME 62 -#endif - -// <y> Oscillator Bypass Select -// <CONF_XOSC20M_NO_BYPASS"> The external crystal oscillator is not bypassed. -// <CONF_XOSC20M_BYPASS"> The external crystal oscillator is bypassed. -// <i> Indicates whether XOSC20M is bypassed. -// <id> xosc20m_bypass -#ifndef CONF_XOSC20M -#define CONF_XOSC20M CONF_XOSC20M_NO_BYPASS -#endif - -// <q> XOSC20M Oscillator Enable -// <i> Indicates whether XOSC20M Oscillator is enabled or not -// <id> xosc20m_arch_enable -#ifndef CONF_XOSC20M_ENABLE -#define CONF_XOSC20M_ENABLE 1 -#endif -// </h> -// </e> - -// <e> PLLACK Oscillator Configuration -// <i> Indicates whether configuration for PLLACK is enabled or not -// <id> enable_pllack -#ifndef CONF_PLLACK_CONFIG -#define CONF_PLLACK_CONFIG 1 -#endif - -// <y> PLLACK Reference Clock Source -// <MAINCK"> Main Clock (MAINCK) -// <i> Select the clock source. -// <id> pllack_ref_clock -#ifndef CONF_PLLACK_CLK -#define CONF_PLLACK_CLK MAINCK -#endif - -// <h> PLLACK Oscillator Control -// <q> PLLACK Oscillator Enable -// <i> Indicates whether PLLACK Oscillator is enabled or not -// <id> pllack_arch_enable -#ifndef CONF_PLLACK_ENABLE -#define CONF_PLLACK_ENABLE 1 -#endif - -// <o> PLLA Frontend Divider (DIVA) <1-255> -// <i> Select the clock divider -// <id> pllack_div -#ifndef CONF_PLLACK_DIV -#define CONF_PLLACK_DIV 1 -#endif - -// <o> PLLACK Muliplier <1-62> -// <i> Indicates PLLA multiplier (multiplier = MULA + 1). -// <id> pllack_mul -#ifndef CONF_PLLACK_MUL -#define CONF_PLLACK_MUL 25 -#endif -// </h> -// </e> - -// <e> UPLLCK Oscillator Configuration -// <i> Indicates whether configuration for UPLLCK is enabled or not -// <id> enable_upllck -#ifndef CONF_UPLLCK_CONFIG -#define CONF_UPLLCK_CONFIG 1 -#endif - -// <y> UPLLCK Reference Clock Source -// <XOSC20M"> External 3-20MHz Oscillator (XOSC20M) -// <i> Select the clock source,only when the input frequency is 12M or 16M, the upllck output is 480M. -// <id> upllck_ref_clock -#ifndef CONF_UPLLCK_CLK -#define CONF_UPLLCK_CLK XOSC20M -#endif - -// <h> UPLLCK Oscillator Control -// <q> UPLLCK Oscillator Enable -// <i> Indicates whether UPLLCK Oscillator is enabled or not -// <id> upllck_arch_enable -#ifndef CONF_UPLLCK_ENABLE -#define CONF_UPLLCK_ENABLE 1 -#endif -// </h> -// </e> - -// <e> UPLLCKDIV Oscillator Configuration -// <i> Indicates whether configuration for UPLLCKDIV is enabled or not -// <id> enable_upllckdiv -#ifndef CONF_UPLLCKDIV_CONFIG -#define CONF_UPLLCKDIV_CONFIG 1 -#endif - -// <y> UPLLCKDIV Reference Clock Source -// <UPLLCK"> USB 480M Clock (UPLLCK) -// <i> Select the clock source. -// <id> upllckdiv_ref_clock -#ifndef CONF_UPLLCKDIV_CLK -#define CONF_UPLLCKDIV_CLK UPLLCK -#endif - -// <h> UPLLCKDIV Oscillator Control -// <o> UPLLCKDIV Clock Divider -// <0=> 1 -// <1=> 2 -// <i> Select the clock divider. -// <id> upllckdiv_div -#ifndef CONF_UPLLCKDIV_DIV -#define CONF_UPLLCKDIV_DIV 1 -#endif -// </h> -// </e> - -// <e> MCK/8 -// <id> enable_mck_div_8 -#ifndef CONF_MCK_DIV_8_CONFIG -#define CONF_MCK_DIV_8_CONFIG 0 -#endif - -// <o> MCK/8 Source -// <0=> Master Clock (MCK) -// <id> mck_div_8_src -#ifndef CONF_MCK_DIV_8_SRC -#define CONF_MCK_DIV_8_SRC 0 -#endif -// </e> - -// <e> External Clock Input Configuration -// <id> enable_dummy_ext -#ifndef CONF_DUMMY_EXT_CONFIG -#define CONF_DUMMY_EXT_CONFIG 1 -#endif - -// <o> External Clock Input Source -// <i> All here are dummy values -// <i> Refer to the peripherals settings for actual input information -// <0=> Specific clock input from specific pin -// <id> dummy_ext_src -#ifndef CONF_DUMMY_EXT_SRC -#define CONF_DUMMY_EXT_SRC 0 -#endif -// </e> - -// <e> External Clock Configuration -// <id> enable_dummy_ext_clk -#ifndef CONF_DUMMY_EXT_CLK_CONFIG -#define CONF_DUMMY_EXT_CLK_CONFIG 1 -#endif - -// <o> External Clock Source -// <i> All here are dummy values -// <i> Refer to the peripherals settings for actual input information -// <0=> External Clock Input -// <id> dummy_ext_clk_src -#ifndef CONF_DUMMY_EXT_CLK_SRC -#define CONF_DUMMY_EXT_CLK_SRC 0 -#endif -// </e> - -// <<< end of configuration section >>> - -#endif // HPL_PMC_CONFIG_H diff --git a/tinyusb/hw/bsp/same70_xplained/hpl_usart_config.h b/tinyusb/hw/bsp/same70_xplained/hpl_usart_config.h deleted file mode 100755 index 50ca3f15..00000000 --- a/tinyusb/hw/bsp/same70_xplained/hpl_usart_config.h +++ /dev/null @@ -1,215 +0,0 @@ -/* Auto-generated config file hpl_usart_config.h */ -#ifndef HPL_USART_CONFIG_H -#define HPL_USART_CONFIG_H - -// <<< Use Configuration Wizard in Context Menu >>> - -#include <peripheral_clk_config.h> - -#ifndef CONF_USART_1_ENABLE -#define CONF_USART_1_ENABLE 1 -#endif - -// <h> Basic Configuration - -// <o> Frame parity -// <0x0=>Even parity -// <0x1=>Odd parity -// <0x2=>Parity forced to 0 -// <0x3=>Parity forced to 1 -// <0x4=>No parity -// <i> Parity bit mode for USART frame -// <id> usart_parity -#ifndef CONF_USART_1_PARITY -#define CONF_USART_1_PARITY 0x4 -#endif - -// <o> Character Size -// <0x0=>5 bits -// <0x1=>6 bits -// <0x2=>7 bits -// <0x3=>8 bits -// <i> Data character size in USART frame -// <id> usart_character_size -#ifndef CONF_USART_1_CHSIZE -#define CONF_USART_1_CHSIZE 0x3 -#endif - -// <o> Stop Bit -// <0=>1 stop bit -// <1=>1.5 stop bits -// <2=>2 stop bits -// <i> Number of stop bits in USART frame -// <id> usart_stop_bit -#ifndef CONF_USART_1_SBMODE -#define CONF_USART_1_SBMODE 0 -#endif - -// <o> Clock Output Select -// <0=>The USART does not drive the SCK pin -// <1=>The USART drives the SCK pin if USCLKS does not select the external clock SCK -// <i> Clock Output Select in USART sck, if in usrt master mode, please drive SCK. -// <id> usart_clock_output_select -#ifndef CONF_USART_1_CLKO -#define CONF_USART_1_CLKO 0 -#endif - -// <o> Baud rate <1-3000000> -// <i> USART baud rate setting -// <id> usart_baud_rate -#ifndef CONF_USART_1_BAUD -#define CONF_USART_1_BAUD 9600 -#endif - -// </h> - -// <e> Advanced configuration -// <id> usart_advanced -#ifndef CONF_USART_1_ADVANCED_CONFIG -#define CONF_USART_1_ADVANCED_CONFIG 0 -#endif - -// <o> Channel Mode -// <0=>Normal Mode -// <1=>Automatic Echo -// <2=>Local Loopback -// <3=>Remote Loopback -// <i> Channel mode in USART frame -// <id> usart_channel_mode -#ifndef CONF_USART_1_CHMODE -#define CONF_USART_1_CHMODE 0 -#endif - -// <q> 9 bits character enable -// <i> Enable 9 bits character, this has high priority than 5/6/7/8 bits. -// <id> usart_9bits_enable -#ifndef CONF_USART_1_MODE9 -#define CONF_USART_1_MODE9 0 -#endif - -// <o> Variable Sync -// <0=>User defined configuration -// <1=>sync field is updated when a character is written into US_THR -// <i> Variable Synchronization of Command/Data Sync Start Frarm Delimiter -// <id> variable_sync -#ifndef CONF_USART_1_VAR_SYNC -#define CONF_USART_1_VAR_SYNC 0 -#endif - -// <o> Oversampling Mode -// <0=>16 Oversampling -// <1=>8 Oversampling -// <i> Oversampling Mode in UART mode -// <id> usart__oversampling_mode -#ifndef CONF_USART_1_OVER -#define CONF_USART_1_OVER 0 -#endif - -// <o> Inhibit Non Ack -// <0=>The NACK is generated -// <1=>The NACK is not generated -// <i> Inhibit Non Acknowledge -// <id> usart__inack -#ifndef CONF_USART_1_INACK -#define CONF_USART_1_INACK 1 -#endif - -// <o> Disable Successive NACK -// <0=>NACK is sent on the ISO line as soon as a parity error occurs -// <1=>Many parity errors generate a NACK on the ISO line -// <i> Disable Successive NACK -// <id> usart_dsnack -#ifndef CONF_USART_1_DSNACK -#define CONF_USART_1_DSNACK 0 -#endif - -// <o> Inverted Data -// <0=>Data isn't inverted, nomal mode -// <1=>Data is inverted -// <i> Inverted Data -// <id> usart_invdata -#ifndef CONF_USART_1_INVDATA -#define CONF_USART_1_INVDATA 0 -#endif - -// <o> Maximum Number of Automatic Iteration <0-7> -// <i> Defines the maximum number of iterations in mode ISO7816, protocol T = 0. -// <id> usart_max_iteration -#ifndef CONF_USART_1_MAX_ITERATION -#define CONF_USART_1_MAX_ITERATION 0 -#endif - -// <q> Receive Line Filter enable -// <i> whether the USART filters the receive line using a three-sample filter -// <id> usart_receive_filter_enable -#ifndef CONF_USART_1_FILTER -#define CONF_USART_1_FILTER 0 -#endif - -// <q> Manchester Encoder/Decoder Enable -// <i> whether the USART Manchester Encoder/Decoder -// <id> usart_manchester_filter_enable -#ifndef CONF_USART_1_MAN -#define CONF_USART_1_MAN 0 -#endif - -// <o> Manchester Synchronization Mode -// <0=>The Manchester start bit is a 0 to 1 transition -// <1=>The Manchester start bit is a 1 to 0 transition -// <i> Manchester Synchronization Mode -// <id> usart_manchester_synchronization_mode -#ifndef CONF_USART_1_MODSYNC -#define CONF_USART_1_MODSYNC 0 -#endif - -// <o> Start Frame Delimiter Selector -// <0=>Start frame delimiter is COMMAND or DATA SYNC -// <1=>Start frame delimiter is one bit -// <i> Start Frame Delimiter Selector -// <id> usart_start_frame_delimiter -#ifndef CONF_USART_1_ONEBIT -#define CONF_USART_1_ONEBIT 0 -#endif - -// <o> Fractional Part <0-7> -// <i> Fractional part of the baud rate if baud rate generator is in fractional mode -// <id> usart_arch_fractional -#ifndef CONF_USART_1_FRACTIONAL -#define CONF_USART_1_FRACTIONAL 0x0 -#endif - -// <o> Data Order -// <0=>LSB is transmitted first -// <1=>MSB is transmitted first -// <i> Data order of the data bits in the frame -// <id> usart_arch_msbf -#ifndef CONF_USART_1_MSBF -#define CONF_USART_1_MSBF 0 -#endif - -// </e> - -#define CONF_USART_1_MODE 0x0 - -// Calculate BAUD register value in UART mode -#if CONF_USART1_CK_SRC < 3 -#ifndef CONF_USART_1_BAUD_CD -#define CONF_USART_1_BAUD_CD ((CONF_USART1_FREQUENCY) / CONF_USART_1_BAUD / 8 / (2 - CONF_USART_1_OVER)) -#endif -#ifndef CONF_USART_1_BAUD_FP -#define CONF_USART_1_BAUD_FP \ - ((CONF_USART1_FREQUENCY) / CONF_USART_1_BAUD / (2 - CONF_USART_1_OVER) - 8 * CONF_USART_1_BAUD_CD) -#endif -#elif CONF_USART1_CK_SRC == 3 -// No division is active. The value written in US_BRGR has no effect. -#ifndef CONF_USART_1_BAUD_CD -#define CONF_USART_1_BAUD_CD 1 -#endif -#ifndef CONF_USART_1_BAUD_FP -#define CONF_USART_1_BAUD_FP 1 -#endif -#endif - -// <<< end of configuration section >>> - -#endif // HPL_USART_CONFIG_H diff --git a/tinyusb/hw/bsp/same70_xplained/hpl_xdmac_config.h b/tinyusb/hw/bsp/same70_xplained/hpl_xdmac_config.h deleted file mode 100755 index a3d62c6f..00000000 --- a/tinyusb/hw/bsp/same70_xplained/hpl_xdmac_config.h +++ /dev/null @@ -1,4400 +0,0 @@ -/* Auto-generated config file hpl_xdmac_config.h */ -#ifndef HPL_XDMAC_CONFIG_H -#define HPL_XDMAC_CONFIG_H - -// <<< Use Configuration Wizard in Context Menu >>> - -// <e> XDMAC enable -// <i> Indicates whether xdmac is enabled or not -// <id> xdmac_enable -#ifndef CONF_DMA_ENABLE -#define CONF_DMA_ENABLE 0 -#endif - -// <e> Channel 0 settings -// <id> dmac_channel_0_settings -#ifndef CONF_DMAC_CHANNEL_0_SETTINGS -#define CONF_DMAC_CHANNEL_0_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_0 -#ifndef CONF_DMAC_BURSTSIZE_0 -#define CONF_DMAC_BURSTSIZE_0 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_0 -#ifndef CONF_DMAC_CHUNKSIZE_0 -#define CONF_DMAC_CHUNKSIZE_0 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_0 -#ifndef CONF_DMAC_BEATSIZE_0 -#define CONF_DMAC_BEATSIZE_0 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_0 -#ifndef CONF_DMAC_SRC_INTERFACE_0 -#define CONF_DMAC_SRC_INTERFACE_0 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_0 -#ifndef CONF_DMAC_DES_INTERFACE_0 -#define CONF_DMAC_DES_INTERFACE_0 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_0 -#ifndef CONF_DMAC_SRCINC_0 -#define CONF_DMAC_SRCINC_0 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_0 -#ifndef CONF_DMAC_DSTINC_0 -#define CONF_DMAC_DSTINC_0 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_0 -#ifndef CONF_DMAC_TRANS_TYPE_0 -#define CONF_DMAC_TRANS_TYPE_0 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_0 -#ifndef CONF_DMAC_TRIGSRC_0 -#define CONF_DMAC_TRIGSRC_0 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_0 == 0 -#define CONF_DMAC_TYPE_0 0 -#define CONF_DMAC_DSYNC_0 0 -#elif CONF_DMAC_TRANS_TYPE_0 == 1 -#define CONF_DMAC_TYPE_0 1 -#define CONF_DMAC_DSYNC_0 0 -#elif CONF_DMAC_TRANS_TYPE_0 == 2 -#define CONF_DMAC_TYPE_0 1 -#define CONF_DMAC_DSYNC_0 1 -#endif - -#if CONF_DMAC_TRIGSRC_0 == 0xFF -#define CONF_DMAC_SWREQ_0 1 -#else -#define CONF_DMAC_SWREQ_0 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_0_SETTINGS == 1 && CONF_DMAC_BEATSIZE_0 != 2 && ((!CONF_DMAC_SRCINC_0) || (!CONF_DMAC_DSTINC_0))) -#if (!CONF_DMAC_SRCINC_0) -#define CONF_DMAC_SRC_STRIDE_0 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_0) -#define CONF_DMAC_DES_STRIDE_0 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_0 -#define CONF_DMAC_SRC_STRIDE_0 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_0 -#define CONF_DMAC_DES_STRIDE_0 0 -#endif - -// <e> Channel 1 settings -// <id> dmac_channel_1_settings -#ifndef CONF_DMAC_CHANNEL_1_SETTINGS -#define CONF_DMAC_CHANNEL_1_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_1 -#ifndef CONF_DMAC_BURSTSIZE_1 -#define CONF_DMAC_BURSTSIZE_1 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_1 -#ifndef CONF_DMAC_CHUNKSIZE_1 -#define CONF_DMAC_CHUNKSIZE_1 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_1 -#ifndef CONF_DMAC_BEATSIZE_1 -#define CONF_DMAC_BEATSIZE_1 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_1 -#ifndef CONF_DMAC_SRC_INTERFACE_1 -#define CONF_DMAC_SRC_INTERFACE_1 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_1 -#ifndef CONF_DMAC_DES_INTERFACE_1 -#define CONF_DMAC_DES_INTERFACE_1 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_1 -#ifndef CONF_DMAC_SRCINC_1 -#define CONF_DMAC_SRCINC_1 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_1 -#ifndef CONF_DMAC_DSTINC_1 -#define CONF_DMAC_DSTINC_1 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_1 -#ifndef CONF_DMAC_TRANS_TYPE_1 -#define CONF_DMAC_TRANS_TYPE_1 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_1 -#ifndef CONF_DMAC_TRIGSRC_1 -#define CONF_DMAC_TRIGSRC_1 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_1 == 0 -#define CONF_DMAC_TYPE_1 0 -#define CONF_DMAC_DSYNC_1 0 -#elif CONF_DMAC_TRANS_TYPE_1 == 1 -#define CONF_DMAC_TYPE_1 1 -#define CONF_DMAC_DSYNC_1 0 -#elif CONF_DMAC_TRANS_TYPE_1 == 2 -#define CONF_DMAC_TYPE_1 1 -#define CONF_DMAC_DSYNC_1 1 -#endif - -#if CONF_DMAC_TRIGSRC_1 == 0xFF -#define CONF_DMAC_SWREQ_1 1 -#else -#define CONF_DMAC_SWREQ_1 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_1_SETTINGS == 1 && CONF_DMAC_BEATSIZE_1 != 2 && ((!CONF_DMAC_SRCINC_1) || (!CONF_DMAC_DSTINC_1))) -#if (!CONF_DMAC_SRCINC_1) -#define CONF_DMAC_SRC_STRIDE_1 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_1) -#define CONF_DMAC_DES_STRIDE_1 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_1 -#define CONF_DMAC_SRC_STRIDE_1 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_1 -#define CONF_DMAC_DES_STRIDE_1 0 -#endif - -// <e> Channel 2 settings -// <id> dmac_channel_2_settings -#ifndef CONF_DMAC_CHANNEL_2_SETTINGS -#define CONF_DMAC_CHANNEL_2_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_2 -#ifndef CONF_DMAC_BURSTSIZE_2 -#define CONF_DMAC_BURSTSIZE_2 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_2 -#ifndef CONF_DMAC_CHUNKSIZE_2 -#define CONF_DMAC_CHUNKSIZE_2 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_2 -#ifndef CONF_DMAC_BEATSIZE_2 -#define CONF_DMAC_BEATSIZE_2 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_2 -#ifndef CONF_DMAC_SRC_INTERFACE_2 -#define CONF_DMAC_SRC_INTERFACE_2 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_2 -#ifndef CONF_DMAC_DES_INTERFACE_2 -#define CONF_DMAC_DES_INTERFACE_2 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_2 -#ifndef CONF_DMAC_SRCINC_2 -#define CONF_DMAC_SRCINC_2 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_2 -#ifndef CONF_DMAC_DSTINC_2 -#define CONF_DMAC_DSTINC_2 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_2 -#ifndef CONF_DMAC_TRANS_TYPE_2 -#define CONF_DMAC_TRANS_TYPE_2 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_2 -#ifndef CONF_DMAC_TRIGSRC_2 -#define CONF_DMAC_TRIGSRC_2 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_2 == 0 -#define CONF_DMAC_TYPE_2 0 -#define CONF_DMAC_DSYNC_2 0 -#elif CONF_DMAC_TRANS_TYPE_2 == 1 -#define CONF_DMAC_TYPE_2 1 -#define CONF_DMAC_DSYNC_2 0 -#elif CONF_DMAC_TRANS_TYPE_2 == 2 -#define CONF_DMAC_TYPE_2 1 -#define CONF_DMAC_DSYNC_2 1 -#endif - -#if CONF_DMAC_TRIGSRC_2 == 0xFF -#define CONF_DMAC_SWREQ_2 1 -#else -#define CONF_DMAC_SWREQ_2 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_2_SETTINGS == 1 && CONF_DMAC_BEATSIZE_2 != 2 && ((!CONF_DMAC_SRCINC_2) || (!CONF_DMAC_DSTINC_2))) -#if (!CONF_DMAC_SRCINC_2) -#define CONF_DMAC_SRC_STRIDE_2 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_2) -#define CONF_DMAC_DES_STRIDE_2 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_2 -#define CONF_DMAC_SRC_STRIDE_2 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_2 -#define CONF_DMAC_DES_STRIDE_2 0 -#endif - -// <e> Channel 3 settings -// <id> dmac_channel_3_settings -#ifndef CONF_DMAC_CHANNEL_3_SETTINGS -#define CONF_DMAC_CHANNEL_3_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_3 -#ifndef CONF_DMAC_BURSTSIZE_3 -#define CONF_DMAC_BURSTSIZE_3 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_3 -#ifndef CONF_DMAC_CHUNKSIZE_3 -#define CONF_DMAC_CHUNKSIZE_3 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_3 -#ifndef CONF_DMAC_BEATSIZE_3 -#define CONF_DMAC_BEATSIZE_3 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_3 -#ifndef CONF_DMAC_SRC_INTERFACE_3 -#define CONF_DMAC_SRC_INTERFACE_3 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_3 -#ifndef CONF_DMAC_DES_INTERFACE_3 -#define CONF_DMAC_DES_INTERFACE_3 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_3 -#ifndef CONF_DMAC_SRCINC_3 -#define CONF_DMAC_SRCINC_3 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_3 -#ifndef CONF_DMAC_DSTINC_3 -#define CONF_DMAC_DSTINC_3 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_3 -#ifndef CONF_DMAC_TRANS_TYPE_3 -#define CONF_DMAC_TRANS_TYPE_3 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_3 -#ifndef CONF_DMAC_TRIGSRC_3 -#define CONF_DMAC_TRIGSRC_3 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_3 == 0 -#define CONF_DMAC_TYPE_3 0 -#define CONF_DMAC_DSYNC_3 0 -#elif CONF_DMAC_TRANS_TYPE_3 == 1 -#define CONF_DMAC_TYPE_3 1 -#define CONF_DMAC_DSYNC_3 0 -#elif CONF_DMAC_TRANS_TYPE_3 == 2 -#define CONF_DMAC_TYPE_3 1 -#define CONF_DMAC_DSYNC_3 1 -#endif - -#if CONF_DMAC_TRIGSRC_3 == 0xFF -#define CONF_DMAC_SWREQ_3 1 -#else -#define CONF_DMAC_SWREQ_3 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_3_SETTINGS == 1 && CONF_DMAC_BEATSIZE_3 != 2 && ((!CONF_DMAC_SRCINC_3) || (!CONF_DMAC_DSTINC_3))) -#if (!CONF_DMAC_SRCINC_3) -#define CONF_DMAC_SRC_STRIDE_3 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_3) -#define CONF_DMAC_DES_STRIDE_3 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_3 -#define CONF_DMAC_SRC_STRIDE_3 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_3 -#define CONF_DMAC_DES_STRIDE_3 0 -#endif - -// <e> Channel 4 settings -// <id> dmac_channel_4_settings -#ifndef CONF_DMAC_CHANNEL_4_SETTINGS -#define CONF_DMAC_CHANNEL_4_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_4 -#ifndef CONF_DMAC_BURSTSIZE_4 -#define CONF_DMAC_BURSTSIZE_4 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_4 -#ifndef CONF_DMAC_CHUNKSIZE_4 -#define CONF_DMAC_CHUNKSIZE_4 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_4 -#ifndef CONF_DMAC_BEATSIZE_4 -#define CONF_DMAC_BEATSIZE_4 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_4 -#ifndef CONF_DMAC_SRC_INTERFACE_4 -#define CONF_DMAC_SRC_INTERFACE_4 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_4 -#ifndef CONF_DMAC_DES_INTERFACE_4 -#define CONF_DMAC_DES_INTERFACE_4 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_4 -#ifndef CONF_DMAC_SRCINC_4 -#define CONF_DMAC_SRCINC_4 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_4 -#ifndef CONF_DMAC_DSTINC_4 -#define CONF_DMAC_DSTINC_4 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_4 -#ifndef CONF_DMAC_TRANS_TYPE_4 -#define CONF_DMAC_TRANS_TYPE_4 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_4 -#ifndef CONF_DMAC_TRIGSRC_4 -#define CONF_DMAC_TRIGSRC_4 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_4 == 0 -#define CONF_DMAC_TYPE_4 0 -#define CONF_DMAC_DSYNC_4 0 -#elif CONF_DMAC_TRANS_TYPE_4 == 1 -#define CONF_DMAC_TYPE_4 1 -#define CONF_DMAC_DSYNC_4 0 -#elif CONF_DMAC_TRANS_TYPE_4 == 2 -#define CONF_DMAC_TYPE_4 1 -#define CONF_DMAC_DSYNC_4 1 -#endif - -#if CONF_DMAC_TRIGSRC_4 == 0xFF -#define CONF_DMAC_SWREQ_4 1 -#else -#define CONF_DMAC_SWREQ_4 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_4_SETTINGS == 1 && CONF_DMAC_BEATSIZE_4 != 2 && ((!CONF_DMAC_SRCINC_4) || (!CONF_DMAC_DSTINC_4))) -#if (!CONF_DMAC_SRCINC_4) -#define CONF_DMAC_SRC_STRIDE_4 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_4) -#define CONF_DMAC_DES_STRIDE_4 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_4 -#define CONF_DMAC_SRC_STRIDE_4 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_4 -#define CONF_DMAC_DES_STRIDE_4 0 -#endif - -// <e> Channel 5 settings -// <id> dmac_channel_5_settings -#ifndef CONF_DMAC_CHANNEL_5_SETTINGS -#define CONF_DMAC_CHANNEL_5_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_5 -#ifndef CONF_DMAC_BURSTSIZE_5 -#define CONF_DMAC_BURSTSIZE_5 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_5 -#ifndef CONF_DMAC_CHUNKSIZE_5 -#define CONF_DMAC_CHUNKSIZE_5 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_5 -#ifndef CONF_DMAC_BEATSIZE_5 -#define CONF_DMAC_BEATSIZE_5 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_5 -#ifndef CONF_DMAC_SRC_INTERFACE_5 -#define CONF_DMAC_SRC_INTERFACE_5 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_5 -#ifndef CONF_DMAC_DES_INTERFACE_5 -#define CONF_DMAC_DES_INTERFACE_5 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_5 -#ifndef CONF_DMAC_SRCINC_5 -#define CONF_DMAC_SRCINC_5 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_5 -#ifndef CONF_DMAC_DSTINC_5 -#define CONF_DMAC_DSTINC_5 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_5 -#ifndef CONF_DMAC_TRANS_TYPE_5 -#define CONF_DMAC_TRANS_TYPE_5 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_5 -#ifndef CONF_DMAC_TRIGSRC_5 -#define CONF_DMAC_TRIGSRC_5 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_5 == 0 -#define CONF_DMAC_TYPE_5 0 -#define CONF_DMAC_DSYNC_5 0 -#elif CONF_DMAC_TRANS_TYPE_5 == 1 -#define CONF_DMAC_TYPE_5 1 -#define CONF_DMAC_DSYNC_5 0 -#elif CONF_DMAC_TRANS_TYPE_5 == 2 -#define CONF_DMAC_TYPE_5 1 -#define CONF_DMAC_DSYNC_5 1 -#endif - -#if CONF_DMAC_TRIGSRC_5 == 0xFF -#define CONF_DMAC_SWREQ_5 1 -#else -#define CONF_DMAC_SWREQ_5 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_5_SETTINGS == 1 && CONF_DMAC_BEATSIZE_5 != 2 && ((!CONF_DMAC_SRCINC_5) || (!CONF_DMAC_DSTINC_5))) -#if (!CONF_DMAC_SRCINC_5) -#define CONF_DMAC_SRC_STRIDE_5 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_5) -#define CONF_DMAC_DES_STRIDE_5 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_5 -#define CONF_DMAC_SRC_STRIDE_5 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_5 -#define CONF_DMAC_DES_STRIDE_5 0 -#endif - -// <e> Channel 6 settings -// <id> dmac_channel_6_settings -#ifndef CONF_DMAC_CHANNEL_6_SETTINGS -#define CONF_DMAC_CHANNEL_6_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_6 -#ifndef CONF_DMAC_BURSTSIZE_6 -#define CONF_DMAC_BURSTSIZE_6 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_6 -#ifndef CONF_DMAC_CHUNKSIZE_6 -#define CONF_DMAC_CHUNKSIZE_6 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_6 -#ifndef CONF_DMAC_BEATSIZE_6 -#define CONF_DMAC_BEATSIZE_6 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_6 -#ifndef CONF_DMAC_SRC_INTERFACE_6 -#define CONF_DMAC_SRC_INTERFACE_6 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_6 -#ifndef CONF_DMAC_DES_INTERFACE_6 -#define CONF_DMAC_DES_INTERFACE_6 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_6 -#ifndef CONF_DMAC_SRCINC_6 -#define CONF_DMAC_SRCINC_6 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_6 -#ifndef CONF_DMAC_DSTINC_6 -#define CONF_DMAC_DSTINC_6 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_6 -#ifndef CONF_DMAC_TRANS_TYPE_6 -#define CONF_DMAC_TRANS_TYPE_6 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_6 -#ifndef CONF_DMAC_TRIGSRC_6 -#define CONF_DMAC_TRIGSRC_6 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_6 == 0 -#define CONF_DMAC_TYPE_6 0 -#define CONF_DMAC_DSYNC_6 0 -#elif CONF_DMAC_TRANS_TYPE_6 == 1 -#define CONF_DMAC_TYPE_6 1 -#define CONF_DMAC_DSYNC_6 0 -#elif CONF_DMAC_TRANS_TYPE_6 == 2 -#define CONF_DMAC_TYPE_6 1 -#define CONF_DMAC_DSYNC_6 1 -#endif - -#if CONF_DMAC_TRIGSRC_6 == 0xFF -#define CONF_DMAC_SWREQ_6 1 -#else -#define CONF_DMAC_SWREQ_6 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_6_SETTINGS == 1 && CONF_DMAC_BEATSIZE_6 != 2 && ((!CONF_DMAC_SRCINC_6) || (!CONF_DMAC_DSTINC_6))) -#if (!CONF_DMAC_SRCINC_6) -#define CONF_DMAC_SRC_STRIDE_6 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_6) -#define CONF_DMAC_DES_STRIDE_6 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_6 -#define CONF_DMAC_SRC_STRIDE_6 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_6 -#define CONF_DMAC_DES_STRIDE_6 0 -#endif - -// <e> Channel 7 settings -// <id> dmac_channel_7_settings -#ifndef CONF_DMAC_CHANNEL_7_SETTINGS -#define CONF_DMAC_CHANNEL_7_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_7 -#ifndef CONF_DMAC_BURSTSIZE_7 -#define CONF_DMAC_BURSTSIZE_7 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_7 -#ifndef CONF_DMAC_CHUNKSIZE_7 -#define CONF_DMAC_CHUNKSIZE_7 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_7 -#ifndef CONF_DMAC_BEATSIZE_7 -#define CONF_DMAC_BEATSIZE_7 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_7 -#ifndef CONF_DMAC_SRC_INTERFACE_7 -#define CONF_DMAC_SRC_INTERFACE_7 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_7 -#ifndef CONF_DMAC_DES_INTERFACE_7 -#define CONF_DMAC_DES_INTERFACE_7 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_7 -#ifndef CONF_DMAC_SRCINC_7 -#define CONF_DMAC_SRCINC_7 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_7 -#ifndef CONF_DMAC_DSTINC_7 -#define CONF_DMAC_DSTINC_7 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_7 -#ifndef CONF_DMAC_TRANS_TYPE_7 -#define CONF_DMAC_TRANS_TYPE_7 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_7 -#ifndef CONF_DMAC_TRIGSRC_7 -#define CONF_DMAC_TRIGSRC_7 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_7 == 0 -#define CONF_DMAC_TYPE_7 0 -#define CONF_DMAC_DSYNC_7 0 -#elif CONF_DMAC_TRANS_TYPE_7 == 1 -#define CONF_DMAC_TYPE_7 1 -#define CONF_DMAC_DSYNC_7 0 -#elif CONF_DMAC_TRANS_TYPE_7 == 2 -#define CONF_DMAC_TYPE_7 1 -#define CONF_DMAC_DSYNC_7 1 -#endif - -#if CONF_DMAC_TRIGSRC_7 == 0xFF -#define CONF_DMAC_SWREQ_7 1 -#else -#define CONF_DMAC_SWREQ_7 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_7_SETTINGS == 1 && CONF_DMAC_BEATSIZE_7 != 2 && ((!CONF_DMAC_SRCINC_7) || (!CONF_DMAC_DSTINC_7))) -#if (!CONF_DMAC_SRCINC_7) -#define CONF_DMAC_SRC_STRIDE_7 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_7) -#define CONF_DMAC_DES_STRIDE_7 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_7 -#define CONF_DMAC_SRC_STRIDE_7 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_7 -#define CONF_DMAC_DES_STRIDE_7 0 -#endif - -// <e> Channel 8 settings -// <id> dmac_channel_8_settings -#ifndef CONF_DMAC_CHANNEL_8_SETTINGS -#define CONF_DMAC_CHANNEL_8_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_8 -#ifndef CONF_DMAC_BURSTSIZE_8 -#define CONF_DMAC_BURSTSIZE_8 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_8 -#ifndef CONF_DMAC_CHUNKSIZE_8 -#define CONF_DMAC_CHUNKSIZE_8 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_8 -#ifndef CONF_DMAC_BEATSIZE_8 -#define CONF_DMAC_BEATSIZE_8 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_8 -#ifndef CONF_DMAC_SRC_INTERFACE_8 -#define CONF_DMAC_SRC_INTERFACE_8 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_8 -#ifndef CONF_DMAC_DES_INTERFACE_8 -#define CONF_DMAC_DES_INTERFACE_8 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_8 -#ifndef CONF_DMAC_SRCINC_8 -#define CONF_DMAC_SRCINC_8 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_8 -#ifndef CONF_DMAC_DSTINC_8 -#define CONF_DMAC_DSTINC_8 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_8 -#ifndef CONF_DMAC_TRANS_TYPE_8 -#define CONF_DMAC_TRANS_TYPE_8 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_8 -#ifndef CONF_DMAC_TRIGSRC_8 -#define CONF_DMAC_TRIGSRC_8 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_8 == 0 -#define CONF_DMAC_TYPE_8 0 -#define CONF_DMAC_DSYNC_8 0 -#elif CONF_DMAC_TRANS_TYPE_8 == 1 -#define CONF_DMAC_TYPE_8 1 -#define CONF_DMAC_DSYNC_8 0 -#elif CONF_DMAC_TRANS_TYPE_8 == 2 -#define CONF_DMAC_TYPE_8 1 -#define CONF_DMAC_DSYNC_8 1 -#endif - -#if CONF_DMAC_TRIGSRC_8 == 0xFF -#define CONF_DMAC_SWREQ_8 1 -#else -#define CONF_DMAC_SWREQ_8 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_8_SETTINGS == 1 && CONF_DMAC_BEATSIZE_8 != 2 && ((!CONF_DMAC_SRCINC_8) || (!CONF_DMAC_DSTINC_8))) -#if (!CONF_DMAC_SRCINC_8) -#define CONF_DMAC_SRC_STRIDE_8 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_8) -#define CONF_DMAC_DES_STRIDE_8 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_8 -#define CONF_DMAC_SRC_STRIDE_8 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_8 -#define CONF_DMAC_DES_STRIDE_8 0 -#endif - -// <e> Channel 9 settings -// <id> dmac_channel_9_settings -#ifndef CONF_DMAC_CHANNEL_9_SETTINGS -#define CONF_DMAC_CHANNEL_9_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_9 -#ifndef CONF_DMAC_BURSTSIZE_9 -#define CONF_DMAC_BURSTSIZE_9 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_9 -#ifndef CONF_DMAC_CHUNKSIZE_9 -#define CONF_DMAC_CHUNKSIZE_9 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_9 -#ifndef CONF_DMAC_BEATSIZE_9 -#define CONF_DMAC_BEATSIZE_9 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_9 -#ifndef CONF_DMAC_SRC_INTERFACE_9 -#define CONF_DMAC_SRC_INTERFACE_9 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_9 -#ifndef CONF_DMAC_DES_INTERFACE_9 -#define CONF_DMAC_DES_INTERFACE_9 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_9 -#ifndef CONF_DMAC_SRCINC_9 -#define CONF_DMAC_SRCINC_9 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_9 -#ifndef CONF_DMAC_DSTINC_9 -#define CONF_DMAC_DSTINC_9 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_9 -#ifndef CONF_DMAC_TRANS_TYPE_9 -#define CONF_DMAC_TRANS_TYPE_9 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_9 -#ifndef CONF_DMAC_TRIGSRC_9 -#define CONF_DMAC_TRIGSRC_9 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_9 == 0 -#define CONF_DMAC_TYPE_9 0 -#define CONF_DMAC_DSYNC_9 0 -#elif CONF_DMAC_TRANS_TYPE_9 == 1 -#define CONF_DMAC_TYPE_9 1 -#define CONF_DMAC_DSYNC_9 0 -#elif CONF_DMAC_TRANS_TYPE_9 == 2 -#define CONF_DMAC_TYPE_9 1 -#define CONF_DMAC_DSYNC_9 1 -#endif - -#if CONF_DMAC_TRIGSRC_9 == 0xFF -#define CONF_DMAC_SWREQ_9 1 -#else -#define CONF_DMAC_SWREQ_9 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_9_SETTINGS == 1 && CONF_DMAC_BEATSIZE_9 != 2 && ((!CONF_DMAC_SRCINC_9) || (!CONF_DMAC_DSTINC_9))) -#if (!CONF_DMAC_SRCINC_9) -#define CONF_DMAC_SRC_STRIDE_9 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_9) -#define CONF_DMAC_DES_STRIDE_9 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_9 -#define CONF_DMAC_SRC_STRIDE_9 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_9 -#define CONF_DMAC_DES_STRIDE_9 0 -#endif - -// <e> Channel 10 settings -// <id> dmac_channel_10_settings -#ifndef CONF_DMAC_CHANNEL_10_SETTINGS -#define CONF_DMAC_CHANNEL_10_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_10 -#ifndef CONF_DMAC_BURSTSIZE_10 -#define CONF_DMAC_BURSTSIZE_10 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_10 -#ifndef CONF_DMAC_CHUNKSIZE_10 -#define CONF_DMAC_CHUNKSIZE_10 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_10 -#ifndef CONF_DMAC_BEATSIZE_10 -#define CONF_DMAC_BEATSIZE_10 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_10 -#ifndef CONF_DMAC_SRC_INTERFACE_10 -#define CONF_DMAC_SRC_INTERFACE_10 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_10 -#ifndef CONF_DMAC_DES_INTERFACE_10 -#define CONF_DMAC_DES_INTERFACE_10 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_10 -#ifndef CONF_DMAC_SRCINC_10 -#define CONF_DMAC_SRCINC_10 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_10 -#ifndef CONF_DMAC_DSTINC_10 -#define CONF_DMAC_DSTINC_10 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_10 -#ifndef CONF_DMAC_TRANS_TYPE_10 -#define CONF_DMAC_TRANS_TYPE_10 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_10 -#ifndef CONF_DMAC_TRIGSRC_10 -#define CONF_DMAC_TRIGSRC_10 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_10 == 0 -#define CONF_DMAC_TYPE_10 0 -#define CONF_DMAC_DSYNC_10 0 -#elif CONF_DMAC_TRANS_TYPE_10 == 1 -#define CONF_DMAC_TYPE_10 1 -#define CONF_DMAC_DSYNC_10 0 -#elif CONF_DMAC_TRANS_TYPE_10 == 2 -#define CONF_DMAC_TYPE_10 1 -#define CONF_DMAC_DSYNC_10 1 -#endif - -#if CONF_DMAC_TRIGSRC_10 == 0xFF -#define CONF_DMAC_SWREQ_10 1 -#else -#define CONF_DMAC_SWREQ_10 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_10_SETTINGS == 1 && CONF_DMAC_BEATSIZE_10 != 2 \ - && ((!CONF_DMAC_SRCINC_10) || (!CONF_DMAC_DSTINC_10))) -#if (!CONF_DMAC_SRCINC_10) -#define CONF_DMAC_SRC_STRIDE_10 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_10) -#define CONF_DMAC_DES_STRIDE_10 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_10 -#define CONF_DMAC_SRC_STRIDE_10 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_10 -#define CONF_DMAC_DES_STRIDE_10 0 -#endif - -// <e> Channel 11 settings -// <id> dmac_channel_11_settings -#ifndef CONF_DMAC_CHANNEL_11_SETTINGS -#define CONF_DMAC_CHANNEL_11_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_11 -#ifndef CONF_DMAC_BURSTSIZE_11 -#define CONF_DMAC_BURSTSIZE_11 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_11 -#ifndef CONF_DMAC_CHUNKSIZE_11 -#define CONF_DMAC_CHUNKSIZE_11 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_11 -#ifndef CONF_DMAC_BEATSIZE_11 -#define CONF_DMAC_BEATSIZE_11 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_11 -#ifndef CONF_DMAC_SRC_INTERFACE_11 -#define CONF_DMAC_SRC_INTERFACE_11 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_11 -#ifndef CONF_DMAC_DES_INTERFACE_11 -#define CONF_DMAC_DES_INTERFACE_11 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_11 -#ifndef CONF_DMAC_SRCINC_11 -#define CONF_DMAC_SRCINC_11 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_11 -#ifndef CONF_DMAC_DSTINC_11 -#define CONF_DMAC_DSTINC_11 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_11 -#ifndef CONF_DMAC_TRANS_TYPE_11 -#define CONF_DMAC_TRANS_TYPE_11 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_11 -#ifndef CONF_DMAC_TRIGSRC_11 -#define CONF_DMAC_TRIGSRC_11 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_11 == 0 -#define CONF_DMAC_TYPE_11 0 -#define CONF_DMAC_DSYNC_11 0 -#elif CONF_DMAC_TRANS_TYPE_11 == 1 -#define CONF_DMAC_TYPE_11 1 -#define CONF_DMAC_DSYNC_11 0 -#elif CONF_DMAC_TRANS_TYPE_11 == 2 -#define CONF_DMAC_TYPE_11 1 -#define CONF_DMAC_DSYNC_11 1 -#endif - -#if CONF_DMAC_TRIGSRC_11 == 0xFF -#define CONF_DMAC_SWREQ_11 1 -#else -#define CONF_DMAC_SWREQ_11 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_11_SETTINGS == 1 && CONF_DMAC_BEATSIZE_11 != 2 \ - && ((!CONF_DMAC_SRCINC_11) || (!CONF_DMAC_DSTINC_11))) -#if (!CONF_DMAC_SRCINC_11) -#define CONF_DMAC_SRC_STRIDE_11 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_11) -#define CONF_DMAC_DES_STRIDE_11 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_11 -#define CONF_DMAC_SRC_STRIDE_11 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_11 -#define CONF_DMAC_DES_STRIDE_11 0 -#endif - -// <e> Channel 12 settings -// <id> dmac_channel_12_settings -#ifndef CONF_DMAC_CHANNEL_12_SETTINGS -#define CONF_DMAC_CHANNEL_12_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_12 -#ifndef CONF_DMAC_BURSTSIZE_12 -#define CONF_DMAC_BURSTSIZE_12 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_12 -#ifndef CONF_DMAC_CHUNKSIZE_12 -#define CONF_DMAC_CHUNKSIZE_12 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_12 -#ifndef CONF_DMAC_BEATSIZE_12 -#define CONF_DMAC_BEATSIZE_12 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_12 -#ifndef CONF_DMAC_SRC_INTERFACE_12 -#define CONF_DMAC_SRC_INTERFACE_12 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_12 -#ifndef CONF_DMAC_DES_INTERFACE_12 -#define CONF_DMAC_DES_INTERFACE_12 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_12 -#ifndef CONF_DMAC_SRCINC_12 -#define CONF_DMAC_SRCINC_12 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_12 -#ifndef CONF_DMAC_DSTINC_12 -#define CONF_DMAC_DSTINC_12 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_12 -#ifndef CONF_DMAC_TRANS_TYPE_12 -#define CONF_DMAC_TRANS_TYPE_12 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_12 -#ifndef CONF_DMAC_TRIGSRC_12 -#define CONF_DMAC_TRIGSRC_12 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_12 == 0 -#define CONF_DMAC_TYPE_12 0 -#define CONF_DMAC_DSYNC_12 0 -#elif CONF_DMAC_TRANS_TYPE_12 == 1 -#define CONF_DMAC_TYPE_12 1 -#define CONF_DMAC_DSYNC_12 0 -#elif CONF_DMAC_TRANS_TYPE_12 == 2 -#define CONF_DMAC_TYPE_12 1 -#define CONF_DMAC_DSYNC_12 1 -#endif - -#if CONF_DMAC_TRIGSRC_12 == 0xFF -#define CONF_DMAC_SWREQ_12 1 -#else -#define CONF_DMAC_SWREQ_12 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_12_SETTINGS == 1 && CONF_DMAC_BEATSIZE_12 != 2 \ - && ((!CONF_DMAC_SRCINC_12) || (!CONF_DMAC_DSTINC_12))) -#if (!CONF_DMAC_SRCINC_12) -#define CONF_DMAC_SRC_STRIDE_12 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_12) -#define CONF_DMAC_DES_STRIDE_12 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_12 -#define CONF_DMAC_SRC_STRIDE_12 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_12 -#define CONF_DMAC_DES_STRIDE_12 0 -#endif - -// <e> Channel 13 settings -// <id> dmac_channel_13_settings -#ifndef CONF_DMAC_CHANNEL_13_SETTINGS -#define CONF_DMAC_CHANNEL_13_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_13 -#ifndef CONF_DMAC_BURSTSIZE_13 -#define CONF_DMAC_BURSTSIZE_13 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_13 -#ifndef CONF_DMAC_CHUNKSIZE_13 -#define CONF_DMAC_CHUNKSIZE_13 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_13 -#ifndef CONF_DMAC_BEATSIZE_13 -#define CONF_DMAC_BEATSIZE_13 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_13 -#ifndef CONF_DMAC_SRC_INTERFACE_13 -#define CONF_DMAC_SRC_INTERFACE_13 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_13 -#ifndef CONF_DMAC_DES_INTERFACE_13 -#define CONF_DMAC_DES_INTERFACE_13 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_13 -#ifndef CONF_DMAC_SRCINC_13 -#define CONF_DMAC_SRCINC_13 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_13 -#ifndef CONF_DMAC_DSTINC_13 -#define CONF_DMAC_DSTINC_13 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_13 -#ifndef CONF_DMAC_TRANS_TYPE_13 -#define CONF_DMAC_TRANS_TYPE_13 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_13 -#ifndef CONF_DMAC_TRIGSRC_13 -#define CONF_DMAC_TRIGSRC_13 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_13 == 0 -#define CONF_DMAC_TYPE_13 0 -#define CONF_DMAC_DSYNC_13 0 -#elif CONF_DMAC_TRANS_TYPE_13 == 1 -#define CONF_DMAC_TYPE_13 1 -#define CONF_DMAC_DSYNC_13 0 -#elif CONF_DMAC_TRANS_TYPE_13 == 2 -#define CONF_DMAC_TYPE_13 1 -#define CONF_DMAC_DSYNC_13 1 -#endif - -#if CONF_DMAC_TRIGSRC_13 == 0xFF -#define CONF_DMAC_SWREQ_13 1 -#else -#define CONF_DMAC_SWREQ_13 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_13_SETTINGS == 1 && CONF_DMAC_BEATSIZE_13 != 2 \ - && ((!CONF_DMAC_SRCINC_13) || (!CONF_DMAC_DSTINC_13))) -#if (!CONF_DMAC_SRCINC_13) -#define CONF_DMAC_SRC_STRIDE_13 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_13) -#define CONF_DMAC_DES_STRIDE_13 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_13 -#define CONF_DMAC_SRC_STRIDE_13 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_13 -#define CONF_DMAC_DES_STRIDE_13 0 -#endif - -// <e> Channel 14 settings -// <id> dmac_channel_14_settings -#ifndef CONF_DMAC_CHANNEL_14_SETTINGS -#define CONF_DMAC_CHANNEL_14_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_14 -#ifndef CONF_DMAC_BURSTSIZE_14 -#define CONF_DMAC_BURSTSIZE_14 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_14 -#ifndef CONF_DMAC_CHUNKSIZE_14 -#define CONF_DMAC_CHUNKSIZE_14 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_14 -#ifndef CONF_DMAC_BEATSIZE_14 -#define CONF_DMAC_BEATSIZE_14 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_14 -#ifndef CONF_DMAC_SRC_INTERFACE_14 -#define CONF_DMAC_SRC_INTERFACE_14 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_14 -#ifndef CONF_DMAC_DES_INTERFACE_14 -#define CONF_DMAC_DES_INTERFACE_14 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_14 -#ifndef CONF_DMAC_SRCINC_14 -#define CONF_DMAC_SRCINC_14 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_14 -#ifndef CONF_DMAC_DSTINC_14 -#define CONF_DMAC_DSTINC_14 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_14 -#ifndef CONF_DMAC_TRANS_TYPE_14 -#define CONF_DMAC_TRANS_TYPE_14 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_14 -#ifndef CONF_DMAC_TRIGSRC_14 -#define CONF_DMAC_TRIGSRC_14 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_14 == 0 -#define CONF_DMAC_TYPE_14 0 -#define CONF_DMAC_DSYNC_14 0 -#elif CONF_DMAC_TRANS_TYPE_14 == 1 -#define CONF_DMAC_TYPE_14 1 -#define CONF_DMAC_DSYNC_14 0 -#elif CONF_DMAC_TRANS_TYPE_14 == 2 -#define CONF_DMAC_TYPE_14 1 -#define CONF_DMAC_DSYNC_14 1 -#endif - -#if CONF_DMAC_TRIGSRC_14 == 0xFF -#define CONF_DMAC_SWREQ_14 1 -#else -#define CONF_DMAC_SWREQ_14 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_14_SETTINGS == 1 && CONF_DMAC_BEATSIZE_14 != 2 \ - && ((!CONF_DMAC_SRCINC_14) || (!CONF_DMAC_DSTINC_14))) -#if (!CONF_DMAC_SRCINC_14) -#define CONF_DMAC_SRC_STRIDE_14 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_14) -#define CONF_DMAC_DES_STRIDE_14 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_14 -#define CONF_DMAC_SRC_STRIDE_14 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_14 -#define CONF_DMAC_DES_STRIDE_14 0 -#endif - -// <e> Channel 15 settings -// <id> dmac_channel_15_settings -#ifndef CONF_DMAC_CHANNEL_15_SETTINGS -#define CONF_DMAC_CHANNEL_15_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_15 -#ifndef CONF_DMAC_BURSTSIZE_15 -#define CONF_DMAC_BURSTSIZE_15 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_15 -#ifndef CONF_DMAC_CHUNKSIZE_15 -#define CONF_DMAC_CHUNKSIZE_15 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_15 -#ifndef CONF_DMAC_BEATSIZE_15 -#define CONF_DMAC_BEATSIZE_15 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_15 -#ifndef CONF_DMAC_SRC_INTERFACE_15 -#define CONF_DMAC_SRC_INTERFACE_15 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_15 -#ifndef CONF_DMAC_DES_INTERFACE_15 -#define CONF_DMAC_DES_INTERFACE_15 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_15 -#ifndef CONF_DMAC_SRCINC_15 -#define CONF_DMAC_SRCINC_15 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_15 -#ifndef CONF_DMAC_DSTINC_15 -#define CONF_DMAC_DSTINC_15 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_15 -#ifndef CONF_DMAC_TRANS_TYPE_15 -#define CONF_DMAC_TRANS_TYPE_15 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_15 -#ifndef CONF_DMAC_TRIGSRC_15 -#define CONF_DMAC_TRIGSRC_15 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_15 == 0 -#define CONF_DMAC_TYPE_15 0 -#define CONF_DMAC_DSYNC_15 0 -#elif CONF_DMAC_TRANS_TYPE_15 == 1 -#define CONF_DMAC_TYPE_15 1 -#define CONF_DMAC_DSYNC_15 0 -#elif CONF_DMAC_TRANS_TYPE_15 == 2 -#define CONF_DMAC_TYPE_15 1 -#define CONF_DMAC_DSYNC_15 1 -#endif - -#if CONF_DMAC_TRIGSRC_15 == 0xFF -#define CONF_DMAC_SWREQ_15 1 -#else -#define CONF_DMAC_SWREQ_15 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_15_SETTINGS == 1 && CONF_DMAC_BEATSIZE_15 != 2 \ - && ((!CONF_DMAC_SRCINC_15) || (!CONF_DMAC_DSTINC_15))) -#if (!CONF_DMAC_SRCINC_15) -#define CONF_DMAC_SRC_STRIDE_15 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_15) -#define CONF_DMAC_DES_STRIDE_15 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_15 -#define CONF_DMAC_SRC_STRIDE_15 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_15 -#define CONF_DMAC_DES_STRIDE_15 0 -#endif - -// <e> Channel 16 settings -// <id> dmac_channel_16_settings -#ifndef CONF_DMAC_CHANNEL_16_SETTINGS -#define CONF_DMAC_CHANNEL_16_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_16 -#ifndef CONF_DMAC_BURSTSIZE_16 -#define CONF_DMAC_BURSTSIZE_16 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_16 -#ifndef CONF_DMAC_CHUNKSIZE_16 -#define CONF_DMAC_CHUNKSIZE_16 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_16 -#ifndef CONF_DMAC_BEATSIZE_16 -#define CONF_DMAC_BEATSIZE_16 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_16 -#ifndef CONF_DMAC_SRC_INTERFACE_16 -#define CONF_DMAC_SRC_INTERFACE_16 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_16 -#ifndef CONF_DMAC_DES_INTERFACE_16 -#define CONF_DMAC_DES_INTERFACE_16 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_16 -#ifndef CONF_DMAC_SRCINC_16 -#define CONF_DMAC_SRCINC_16 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_16 -#ifndef CONF_DMAC_DSTINC_16 -#define CONF_DMAC_DSTINC_16 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_16 -#ifndef CONF_DMAC_TRANS_TYPE_16 -#define CONF_DMAC_TRANS_TYPE_16 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_16 -#ifndef CONF_DMAC_TRIGSRC_16 -#define CONF_DMAC_TRIGSRC_16 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_16 == 0 -#define CONF_DMAC_TYPE_16 0 -#define CONF_DMAC_DSYNC_16 0 -#elif CONF_DMAC_TRANS_TYPE_16 == 1 -#define CONF_DMAC_TYPE_16 1 -#define CONF_DMAC_DSYNC_16 0 -#elif CONF_DMAC_TRANS_TYPE_16 == 2 -#define CONF_DMAC_TYPE_16 1 -#define CONF_DMAC_DSYNC_16 1 -#endif - -#if CONF_DMAC_TRIGSRC_16 == 0xFF -#define CONF_DMAC_SWREQ_16 1 -#else -#define CONF_DMAC_SWREQ_16 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_16_SETTINGS == 1 && CONF_DMAC_BEATSIZE_16 != 2 \ - && ((!CONF_DMAC_SRCINC_16) || (!CONF_DMAC_DSTINC_16))) -#if (!CONF_DMAC_SRCINC_16) -#define CONF_DMAC_SRC_STRIDE_16 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_16) -#define CONF_DMAC_DES_STRIDE_16 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_16 -#define CONF_DMAC_SRC_STRIDE_16 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_16 -#define CONF_DMAC_DES_STRIDE_16 0 -#endif - -// <e> Channel 17 settings -// <id> dmac_channel_17_settings -#ifndef CONF_DMAC_CHANNEL_17_SETTINGS -#define CONF_DMAC_CHANNEL_17_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_17 -#ifndef CONF_DMAC_BURSTSIZE_17 -#define CONF_DMAC_BURSTSIZE_17 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_17 -#ifndef CONF_DMAC_CHUNKSIZE_17 -#define CONF_DMAC_CHUNKSIZE_17 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_17 -#ifndef CONF_DMAC_BEATSIZE_17 -#define CONF_DMAC_BEATSIZE_17 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_17 -#ifndef CONF_DMAC_SRC_INTERFACE_17 -#define CONF_DMAC_SRC_INTERFACE_17 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_17 -#ifndef CONF_DMAC_DES_INTERFACE_17 -#define CONF_DMAC_DES_INTERFACE_17 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_17 -#ifndef CONF_DMAC_SRCINC_17 -#define CONF_DMAC_SRCINC_17 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_17 -#ifndef CONF_DMAC_DSTINC_17 -#define CONF_DMAC_DSTINC_17 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_17 -#ifndef CONF_DMAC_TRANS_TYPE_17 -#define CONF_DMAC_TRANS_TYPE_17 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_17 -#ifndef CONF_DMAC_TRIGSRC_17 -#define CONF_DMAC_TRIGSRC_17 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_17 == 0 -#define CONF_DMAC_TYPE_17 0 -#define CONF_DMAC_DSYNC_17 0 -#elif CONF_DMAC_TRANS_TYPE_17 == 1 -#define CONF_DMAC_TYPE_17 1 -#define CONF_DMAC_DSYNC_17 0 -#elif CONF_DMAC_TRANS_TYPE_17 == 2 -#define CONF_DMAC_TYPE_17 1 -#define CONF_DMAC_DSYNC_17 1 -#endif - -#if CONF_DMAC_TRIGSRC_17 == 0xFF -#define CONF_DMAC_SWREQ_17 1 -#else -#define CONF_DMAC_SWREQ_17 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_17_SETTINGS == 1 && CONF_DMAC_BEATSIZE_17 != 2 \ - && ((!CONF_DMAC_SRCINC_17) || (!CONF_DMAC_DSTINC_17))) -#if (!CONF_DMAC_SRCINC_17) -#define CONF_DMAC_SRC_STRIDE_17 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_17) -#define CONF_DMAC_DES_STRIDE_17 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_17 -#define CONF_DMAC_SRC_STRIDE_17 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_17 -#define CONF_DMAC_DES_STRIDE_17 0 -#endif - -// <e> Channel 18 settings -// <id> dmac_channel_18_settings -#ifndef CONF_DMAC_CHANNEL_18_SETTINGS -#define CONF_DMAC_CHANNEL_18_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_18 -#ifndef CONF_DMAC_BURSTSIZE_18 -#define CONF_DMAC_BURSTSIZE_18 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_18 -#ifndef CONF_DMAC_CHUNKSIZE_18 -#define CONF_DMAC_CHUNKSIZE_18 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_18 -#ifndef CONF_DMAC_BEATSIZE_18 -#define CONF_DMAC_BEATSIZE_18 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_18 -#ifndef CONF_DMAC_SRC_INTERFACE_18 -#define CONF_DMAC_SRC_INTERFACE_18 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_18 -#ifndef CONF_DMAC_DES_INTERFACE_18 -#define CONF_DMAC_DES_INTERFACE_18 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_18 -#ifndef CONF_DMAC_SRCINC_18 -#define CONF_DMAC_SRCINC_18 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_18 -#ifndef CONF_DMAC_DSTINC_18 -#define CONF_DMAC_DSTINC_18 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_18 -#ifndef CONF_DMAC_TRANS_TYPE_18 -#define CONF_DMAC_TRANS_TYPE_18 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_18 -#ifndef CONF_DMAC_TRIGSRC_18 -#define CONF_DMAC_TRIGSRC_18 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_18 == 0 -#define CONF_DMAC_TYPE_18 0 -#define CONF_DMAC_DSYNC_18 0 -#elif CONF_DMAC_TRANS_TYPE_18 == 1 -#define CONF_DMAC_TYPE_18 1 -#define CONF_DMAC_DSYNC_18 0 -#elif CONF_DMAC_TRANS_TYPE_18 == 2 -#define CONF_DMAC_TYPE_18 1 -#define CONF_DMAC_DSYNC_18 1 -#endif - -#if CONF_DMAC_TRIGSRC_18 == 0xFF -#define CONF_DMAC_SWREQ_18 1 -#else -#define CONF_DMAC_SWREQ_18 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_18_SETTINGS == 1 && CONF_DMAC_BEATSIZE_18 != 2 \ - && ((!CONF_DMAC_SRCINC_18) || (!CONF_DMAC_DSTINC_18))) -#if (!CONF_DMAC_SRCINC_18) -#define CONF_DMAC_SRC_STRIDE_18 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_18) -#define CONF_DMAC_DES_STRIDE_18 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_18 -#define CONF_DMAC_SRC_STRIDE_18 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_18 -#define CONF_DMAC_DES_STRIDE_18 0 -#endif - -// <e> Channel 19 settings -// <id> dmac_channel_19_settings -#ifndef CONF_DMAC_CHANNEL_19_SETTINGS -#define CONF_DMAC_CHANNEL_19_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_19 -#ifndef CONF_DMAC_BURSTSIZE_19 -#define CONF_DMAC_BURSTSIZE_19 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_19 -#ifndef CONF_DMAC_CHUNKSIZE_19 -#define CONF_DMAC_CHUNKSIZE_19 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_19 -#ifndef CONF_DMAC_BEATSIZE_19 -#define CONF_DMAC_BEATSIZE_19 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_19 -#ifndef CONF_DMAC_SRC_INTERFACE_19 -#define CONF_DMAC_SRC_INTERFACE_19 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_19 -#ifndef CONF_DMAC_DES_INTERFACE_19 -#define CONF_DMAC_DES_INTERFACE_19 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_19 -#ifndef CONF_DMAC_SRCINC_19 -#define CONF_DMAC_SRCINC_19 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_19 -#ifndef CONF_DMAC_DSTINC_19 -#define CONF_DMAC_DSTINC_19 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_19 -#ifndef CONF_DMAC_TRANS_TYPE_19 -#define CONF_DMAC_TRANS_TYPE_19 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_19 -#ifndef CONF_DMAC_TRIGSRC_19 -#define CONF_DMAC_TRIGSRC_19 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_19 == 0 -#define CONF_DMAC_TYPE_19 0 -#define CONF_DMAC_DSYNC_19 0 -#elif CONF_DMAC_TRANS_TYPE_19 == 1 -#define CONF_DMAC_TYPE_19 1 -#define CONF_DMAC_DSYNC_19 0 -#elif CONF_DMAC_TRANS_TYPE_19 == 2 -#define CONF_DMAC_TYPE_19 1 -#define CONF_DMAC_DSYNC_19 1 -#endif - -#if CONF_DMAC_TRIGSRC_19 == 0xFF -#define CONF_DMAC_SWREQ_19 1 -#else -#define CONF_DMAC_SWREQ_19 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_19_SETTINGS == 1 && CONF_DMAC_BEATSIZE_19 != 2 \ - && ((!CONF_DMAC_SRCINC_19) || (!CONF_DMAC_DSTINC_19))) -#if (!CONF_DMAC_SRCINC_19) -#define CONF_DMAC_SRC_STRIDE_19 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_19) -#define CONF_DMAC_DES_STRIDE_19 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_19 -#define CONF_DMAC_SRC_STRIDE_19 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_19 -#define CONF_DMAC_DES_STRIDE_19 0 -#endif - -// <e> Channel 20 settings -// <id> dmac_channel_20_settings -#ifndef CONF_DMAC_CHANNEL_20_SETTINGS -#define CONF_DMAC_CHANNEL_20_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_20 -#ifndef CONF_DMAC_BURSTSIZE_20 -#define CONF_DMAC_BURSTSIZE_20 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_20 -#ifndef CONF_DMAC_CHUNKSIZE_20 -#define CONF_DMAC_CHUNKSIZE_20 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_20 -#ifndef CONF_DMAC_BEATSIZE_20 -#define CONF_DMAC_BEATSIZE_20 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_20 -#ifndef CONF_DMAC_SRC_INTERFACE_20 -#define CONF_DMAC_SRC_INTERFACE_20 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_20 -#ifndef CONF_DMAC_DES_INTERFACE_20 -#define CONF_DMAC_DES_INTERFACE_20 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_20 -#ifndef CONF_DMAC_SRCINC_20 -#define CONF_DMAC_SRCINC_20 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_20 -#ifndef CONF_DMAC_DSTINC_20 -#define CONF_DMAC_DSTINC_20 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_20 -#ifndef CONF_DMAC_TRANS_TYPE_20 -#define CONF_DMAC_TRANS_TYPE_20 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_20 -#ifndef CONF_DMAC_TRIGSRC_20 -#define CONF_DMAC_TRIGSRC_20 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_20 == 0 -#define CONF_DMAC_TYPE_20 0 -#define CONF_DMAC_DSYNC_20 0 -#elif CONF_DMAC_TRANS_TYPE_20 == 1 -#define CONF_DMAC_TYPE_20 1 -#define CONF_DMAC_DSYNC_20 0 -#elif CONF_DMAC_TRANS_TYPE_20 == 2 -#define CONF_DMAC_TYPE_20 1 -#define CONF_DMAC_DSYNC_20 1 -#endif - -#if CONF_DMAC_TRIGSRC_20 == 0xFF -#define CONF_DMAC_SWREQ_20 1 -#else -#define CONF_DMAC_SWREQ_20 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_20_SETTINGS == 1 && CONF_DMAC_BEATSIZE_20 != 2 \ - && ((!CONF_DMAC_SRCINC_20) || (!CONF_DMAC_DSTINC_20))) -#if (!CONF_DMAC_SRCINC_20) -#define CONF_DMAC_SRC_STRIDE_20 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_20) -#define CONF_DMAC_DES_STRIDE_20 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_20 -#define CONF_DMAC_SRC_STRIDE_20 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_20 -#define CONF_DMAC_DES_STRIDE_20 0 -#endif - -// <e> Channel 21 settings -// <id> dmac_channel_21_settings -#ifndef CONF_DMAC_CHANNEL_21_SETTINGS -#define CONF_DMAC_CHANNEL_21_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_21 -#ifndef CONF_DMAC_BURSTSIZE_21 -#define CONF_DMAC_BURSTSIZE_21 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_21 -#ifndef CONF_DMAC_CHUNKSIZE_21 -#define CONF_DMAC_CHUNKSIZE_21 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_21 -#ifndef CONF_DMAC_BEATSIZE_21 -#define CONF_DMAC_BEATSIZE_21 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_21 -#ifndef CONF_DMAC_SRC_INTERFACE_21 -#define CONF_DMAC_SRC_INTERFACE_21 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_21 -#ifndef CONF_DMAC_DES_INTERFACE_21 -#define CONF_DMAC_DES_INTERFACE_21 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_21 -#ifndef CONF_DMAC_SRCINC_21 -#define CONF_DMAC_SRCINC_21 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_21 -#ifndef CONF_DMAC_DSTINC_21 -#define CONF_DMAC_DSTINC_21 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_21 -#ifndef CONF_DMAC_TRANS_TYPE_21 -#define CONF_DMAC_TRANS_TYPE_21 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_21 -#ifndef CONF_DMAC_TRIGSRC_21 -#define CONF_DMAC_TRIGSRC_21 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_21 == 0 -#define CONF_DMAC_TYPE_21 0 -#define CONF_DMAC_DSYNC_21 0 -#elif CONF_DMAC_TRANS_TYPE_21 == 1 -#define CONF_DMAC_TYPE_21 1 -#define CONF_DMAC_DSYNC_21 0 -#elif CONF_DMAC_TRANS_TYPE_21 == 2 -#define CONF_DMAC_TYPE_21 1 -#define CONF_DMAC_DSYNC_21 1 -#endif - -#if CONF_DMAC_TRIGSRC_21 == 0xFF -#define CONF_DMAC_SWREQ_21 1 -#else -#define CONF_DMAC_SWREQ_21 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_21_SETTINGS == 1 && CONF_DMAC_BEATSIZE_21 != 2 \ - && ((!CONF_DMAC_SRCINC_21) || (!CONF_DMAC_DSTINC_21))) -#if (!CONF_DMAC_SRCINC_21) -#define CONF_DMAC_SRC_STRIDE_21 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_21) -#define CONF_DMAC_DES_STRIDE_21 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_21 -#define CONF_DMAC_SRC_STRIDE_21 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_21 -#define CONF_DMAC_DES_STRIDE_21 0 -#endif - -// <e> Channel 22 settings -// <id> dmac_channel_22_settings -#ifndef CONF_DMAC_CHANNEL_22_SETTINGS -#define CONF_DMAC_CHANNEL_22_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_22 -#ifndef CONF_DMAC_BURSTSIZE_22 -#define CONF_DMAC_BURSTSIZE_22 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_22 -#ifndef CONF_DMAC_CHUNKSIZE_22 -#define CONF_DMAC_CHUNKSIZE_22 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_22 -#ifndef CONF_DMAC_BEATSIZE_22 -#define CONF_DMAC_BEATSIZE_22 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_22 -#ifndef CONF_DMAC_SRC_INTERFACE_22 -#define CONF_DMAC_SRC_INTERFACE_22 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_22 -#ifndef CONF_DMAC_DES_INTERFACE_22 -#define CONF_DMAC_DES_INTERFACE_22 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_22 -#ifndef CONF_DMAC_SRCINC_22 -#define CONF_DMAC_SRCINC_22 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_22 -#ifndef CONF_DMAC_DSTINC_22 -#define CONF_DMAC_DSTINC_22 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_22 -#ifndef CONF_DMAC_TRANS_TYPE_22 -#define CONF_DMAC_TRANS_TYPE_22 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_22 -#ifndef CONF_DMAC_TRIGSRC_22 -#define CONF_DMAC_TRIGSRC_22 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_22 == 0 -#define CONF_DMAC_TYPE_22 0 -#define CONF_DMAC_DSYNC_22 0 -#elif CONF_DMAC_TRANS_TYPE_22 == 1 -#define CONF_DMAC_TYPE_22 1 -#define CONF_DMAC_DSYNC_22 0 -#elif CONF_DMAC_TRANS_TYPE_22 == 2 -#define CONF_DMAC_TYPE_22 1 -#define CONF_DMAC_DSYNC_22 1 -#endif - -#if CONF_DMAC_TRIGSRC_22 == 0xFF -#define CONF_DMAC_SWREQ_22 1 -#else -#define CONF_DMAC_SWREQ_22 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_22_SETTINGS == 1 && CONF_DMAC_BEATSIZE_22 != 2 \ - && ((!CONF_DMAC_SRCINC_22) || (!CONF_DMAC_DSTINC_22))) -#if (!CONF_DMAC_SRCINC_22) -#define CONF_DMAC_SRC_STRIDE_22 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_22) -#define CONF_DMAC_DES_STRIDE_22 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_22 -#define CONF_DMAC_SRC_STRIDE_22 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_22 -#define CONF_DMAC_DES_STRIDE_22 0 -#endif - -// <e> Channel 23 settings -// <id> dmac_channel_23_settings -#ifndef CONF_DMAC_CHANNEL_23_SETTINGS -#define CONF_DMAC_CHANNEL_23_SETTINGS 0 -#endif - -// <o> Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// <i> Define the memory burst size -// <id> dmac_burstsize_23 -#ifndef CONF_DMAC_BURSTSIZE_23 -#define CONF_DMAC_BURSTSIZE_23 0x0 -#endif - -// <o> Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// <i> Define the peripheral chunk size -// <id> dmac_chunksize_23 -#ifndef CONF_DMAC_CHUNKSIZE_23 -#define CONF_DMAC_CHUNKSIZE_23 0x0 -#endif - -// <o> Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// <i> Defines the size of one beat -// <id> dmac_beatsize_23 -#ifndef CONF_DMAC_BEATSIZE_23 -#define CONF_DMAC_BEATSIZE_23 0x0 -#endif - -// <o> Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is read through the system bus interface 0 or 1 -// <id> dma_src_interface_23 -#ifndef CONF_DMAC_SRC_INTERFACE_23 -#define CONF_DMAC_SRC_INTERFACE_23 0x0 -#endif - -// <o> Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// <i> Define the data is written through the system bus interface 0 or 1 -// <id> dma_des_interface_23 -#ifndef CONF_DMAC_DES_INTERFACE_23 -#define CONF_DMAC_DES_INTERFACE_23 0x0 -#endif - -// <q> Source Address Increment -// <i> Indicates whether the source address incremented as beat size or not -// <id> dmac_srcinc_23 -#ifndef CONF_DMAC_SRCINC_23 -#define CONF_DMAC_SRCINC_23 0 -#endif - -// <q> Destination Address Increment -// <i> Indicates whether the destination address incremented as beat size or not -// <id> dmac_dstinc_23 -#ifndef CONF_DMAC_DSTINC_23 -#define CONF_DMAC_DSTINC_23 0 -#endif - -// <o> Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// <i> Define the data transfer type -// <id> dma_trans_type_23 -#ifndef CONF_DMAC_TRANS_TYPE_23 -#define CONF_DMAC_TRANS_TYPE_23 0x0 -#endif - -// <o> Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// <i> Define the DMA trigger source -// <id> dmac_trifsrc_23 -#ifndef CONF_DMAC_TRIGSRC_23 -#define CONF_DMAC_TRIGSRC_23 0xff -#endif - -// </e> - -#if CONF_DMAC_TRANS_TYPE_23 == 0 -#define CONF_DMAC_TYPE_23 0 -#define CONF_DMAC_DSYNC_23 0 -#elif CONF_DMAC_TRANS_TYPE_23 == 1 -#define CONF_DMAC_TYPE_23 1 -#define CONF_DMAC_DSYNC_23 0 -#elif CONF_DMAC_TRANS_TYPE_23 == 2 -#define CONF_DMAC_TYPE_23 1 -#define CONF_DMAC_DSYNC_23 1 -#endif - -#if CONF_DMAC_TRIGSRC_23 == 0xFF -#define CONF_DMAC_SWREQ_23 1 -#else -#define CONF_DMAC_SWREQ_23 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_23_SETTINGS == 1 && CONF_DMAC_BEATSIZE_23 != 2 \ - && ((!CONF_DMAC_SRCINC_23) || (!CONF_DMAC_DSTINC_23))) -#if (!CONF_DMAC_SRCINC_23) -#define CONF_DMAC_SRC_STRIDE_23 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_23) -#define CONF_DMAC_DES_STRIDE_23 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_23 -#define CONF_DMAC_SRC_STRIDE_23 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_23 -#define CONF_DMAC_DES_STRIDE_23 0 -#endif - -// </e> - -// <<< end of configuration section >>> - -#endif // HPL_XDMAC_CONFIG_H diff --git a/tinyusb/hw/bsp/same70_xplained/peripheral_clk_config.h b/tinyusb/hw/bsp/same70_xplained/peripheral_clk_config.h deleted file mode 100755 index 84756f5a..00000000 --- a/tinyusb/hw/bsp/same70_xplained/peripheral_clk_config.h +++ /dev/null @@ -1,126 +0,0 @@ -/* Auto-generated config file peripheral_clk_config.h */ -#ifndef PERIPHERAL_CLK_CONFIG_H -#define PERIPHERAL_CLK_CONFIG_H - -// <<< Use Configuration Wizard in Context Menu >>> - -/** - * \def CONF_HCLK_FREQUENCY - * \brief HCLK's Clock frequency - */ -#ifndef CONF_HCLK_FREQUENCY -#define CONF_HCLK_FREQUENCY 300000000 -#endif - -/** - * \def CONF_FCLK_FREQUENCY - * \brief FCLK's Clock frequency - */ -#ifndef CONF_FCLK_FREQUENCY -#define CONF_FCLK_FREQUENCY 300000000 -#endif - -/** - * \def CONF_CPU_FREQUENCY - * \brief CPU's Clock frequency - */ -#ifndef CONF_CPU_FREQUENCY -#define CONF_CPU_FREQUENCY 300000000 -#endif - -/** - * \def CONF_SLCK_FREQUENCY - * \brief Slow Clock frequency - */ -#define CONF_SLCK_FREQUENCY 0 - -/** - * \def CONF_MCK_FREQUENCY - * \brief Master Clock frequency - */ -#define CONF_MCK_FREQUENCY 150000000 - -/** - * \def CONF_PCK6_FREQUENCY - * \brief Programmable Clock Controller 6 frequency - */ -#define CONF_PCK6_FREQUENCY 1714285 - -// <h> USART Clock Settings -// <o> USART Clock source - -// <0=> Master Clock (MCK) -// <1=> MCK / 8 for USART -// <2=> Programmable Clock Controller 4 (PMC_PCK4) -// <3=> External Clock -// <i> This defines the clock source for the USART -// <id> usart_clock_source -#ifndef CONF_USART1_CK_SRC -#define CONF_USART1_CK_SRC 0 -#endif - -// <o> USART External Clock Input on SCK <1-4294967295> -// <i> Inputs the external clock frequency on SCK -// <id> usart_clock_freq -#ifndef CONF_USART1_SCK_FREQ -#define CONF_USART1_SCK_FREQ 10000000 -#endif - -// </h> - -/** - * \def USART FREQUENCY - * \brief USART's Clock frequency - */ -#ifndef CONF_USART1_FREQUENCY -#define CONF_USART1_FREQUENCY 150000000 -#endif - -#ifndef CONF_SRC_USB_480M -#define CONF_SRC_USB_480M 0 -#endif - -#ifndef CONF_SRC_USB_48M -#define CONF_SRC_USB_48M 1 -#endif - -// <y> USB Full/Low Speed Clock -// <CONF_SRC_USB_48M"> USB Clock Controller (USB_48M) -// <id> usb_fsls_clock_source -// <i> 48MHz clock source for low speed and full speed. -// <i> It must be available when low speed is supported by host driver. -// <i> It must be available when low power mode is selected. -#ifndef CONF_USBHS_FSLS_SRC -#define CONF_USBHS_FSLS_SRC CONF_SRC_USB_48M -#endif - -// <y> USB Clock Source(Normal/Low-power Mode Selection) -// <CONF_SRC_USB_480M"> USB High Speed Clock (USB_480M) -// <CONF_SRC_USB_48M"> USB Clock Controller (USB_48M) -// <id> usb_clock_source -// <i> Select the clock source for USB. -// <i> In normal mode, use "USB High Speed Clock (USB_480M)". -// <i> In low-power mode, use "USB Clock Controller (USB_48M)". -#ifndef CONF_USBHS_SRC -#define CONF_USBHS_SRC CONF_SRC_USB_480M -#endif - -/** - * \def CONF_USBHS_FSLS_FREQUENCY - * \brief USBHS's Full/Low Speed Clock Source frequency - */ -#ifndef CONF_USBHS_FSLS_FREQUENCY -#define CONF_USBHS_FSLS_FREQUENCY 48000000 -#endif - -/** - * \def CONF_USBHS_FREQUENCY - * \brief USBHS's Selected Clock Source frequency - */ -#ifndef CONF_USBHS_FREQUENCY -#define CONF_USBHS_FREQUENCY 480000000 -#endif - -// <<< end of configuration section >>> - -#endif // PERIPHERAL_CLK_CONFIG_H diff --git a/tinyusb/hw/bsp/same70_xplained/same70_xplained.c b/tinyusb/hw/bsp/same70_xplained/same70_xplained.c deleted file mode 100755 index e6e7db0f..00000000 --- a/tinyusb/hw/bsp/same70_xplained/same70_xplained.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019, hathach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#include "sam.h" -#include "bsp/board.h" - -#include "peripheral_clk_config.h" -#include "hpl/usart/hpl_usart_base.h" -#include "hpl/pmc/hpl_pmc.h" -#include "hal/include/hal_init.h" -#include "hal/include/hal_usart_async.h" -#include "hal/include/hal_gpio.h" - - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ - -#define LED_PIN GPIO(GPIO_PORTC, 8) - -#define BUTTON_PIN GPIO(GPIO_PORTA, 11) -#define BUTTON_STATE_ACTIVE 0 - -#define UART_TX_PIN GPIO(GPIO_PORTB, 4) -#define UART_RX_PIN GPIO(GPIO_PORTA, 21) - -static struct usart_async_descriptor edbg_com; -static uint8_t edbg_com_buffer[64]; -static volatile bool uart_busy = false; - -static void tx_cb_EDBG_COM(const struct usart_async_descriptor *const io_descr) -{ - (void) io_descr; - uart_busy = false; -} - -//------------- IMPLEMENTATION -------------// -void board_init(void) -{ - init_mcu(); - - /* Disable Watchdog */ - hri_wdt_set_MR_WDDIS_bit(WDT); - - // LED - _pmc_enable_periph_clock(ID_PIOC); - gpio_set_pin_level(LED_PIN, false); - gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); - gpio_set_pin_function(LED_PIN, GPIO_PIN_FUNCTION_OFF); - - // Button - _pmc_enable_periph_clock(ID_PIOA); - gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); - gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP); - gpio_set_pin_function(BUTTON_PIN, GPIO_PIN_FUNCTION_OFF); - - // Uart via EDBG Com - _pmc_enable_periph_clock(ID_USART1); - gpio_set_pin_function(UART_RX_PIN, MUX_PA21A_USART1_RXD1); - gpio_set_pin_function(UART_TX_PIN, MUX_PB4D_USART1_TXD1); - - usart_async_init(&edbg_com, USART1, edbg_com_buffer, sizeof(edbg_com_buffer), _usart_get_usart_async()); - usart_async_set_baud_rate(&edbg_com, CFG_BOARD_UART_BAUDRATE); - usart_async_register_callback(&edbg_com, USART_ASYNC_TXC_CB, tx_cb_EDBG_COM); - usart_async_enable(&edbg_com); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer (samd SystemCoreClock may not correct) - SysTick_Config(CONF_CPU_FREQUENCY / 1000); -#endif - - // Enable USB clock - _pmc_enable_periph_clock(ID_USBHS); - -} - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USBHS_Handler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - gpio_set_pin_level(LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == gpio_get_pin_level(BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - // while until previous transfer is complete - while(uart_busy) {} - uart_busy = true; - - io_write(&edbg_com.io, buf, len); - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/tinyusb/hw/bsp/samg55xplained/board.mk b/tinyusb/hw/bsp/samg55xplained/board.mk deleted file mode 100755 index aed4de68..00000000 --- a/tinyusb/hw/bsp/samg55xplained/board.mk +++ /dev/null @@ -1,52 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/microchip - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib -nostartfiles \ - -D__SAMG55J19__ \ - -DCFG_TUSB_MCU=OPT_MCU_SAMG - -# suppress following warnings from mcu driver -CFLAGS += -Wno-error=undef - -ASF_DIR = hw/mcu/microchip/samg55 - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/samg55j19_flash.ld - -SRC_C += \ - src/portable/microchip/samg/dcd_samg.c \ - $(ASF_DIR)/samg55/gcc/gcc/startup_samg55.c \ - $(ASF_DIR)/samg55/gcc/system_samg55.c \ - $(ASF_DIR)/hpl/core/hpl_init.c \ - $(ASF_DIR)/hpl/usart/hpl_usart.c \ - $(ASF_DIR)/hpl/pmc/hpl_pmc.c \ - $(ASF_DIR)/hal/src/hal_atomic.c - -INC += \ - $(TOP)/hw/bsp/$(BOARD) \ - $(TOP)/$(ASF_DIR) \ - $(TOP)/$(ASF_DIR)/config \ - $(TOP)/$(ASF_DIR)/samg55/include \ - $(TOP)/$(ASF_DIR)/hal/include \ - $(TOP)/$(ASF_DIR)/hal/utils/include \ - $(TOP)/$(ASF_DIR)/hpl/core \ - $(TOP)/$(ASF_DIR)/hpl/pio \ - $(TOP)/$(ASF_DIR)/hpl/pmc \ - $(TOP)/$(ASF_DIR)/hri \ - $(TOP)/$(ASF_DIR)/CMSIS/Core/Include - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = ATSAMG55J19 - -# flash using edbg from https://github.com/ataradov/edbg -flash: $(BUILD)/$(PROJECT).bin - edbg --verbose -t samg55 -pv -f $< diff --git a/tinyusb/hw/bsp/samg55xplained/hpl_usart_config.h b/tinyusb/hw/bsp/samg55xplained/hpl_usart_config.h deleted file mode 100755 index 4f2837d2..00000000 --- a/tinyusb/hw/bsp/samg55xplained/hpl_usart_config.h +++ /dev/null @@ -1,215 +0,0 @@ -/* Auto-generated config file hpl_usart_config.h */ -#ifndef HPL_USART_CONFIG_H -#define HPL_USART_CONFIG_H - -// <<< Use Configuration Wizard in Context Menu >>> - -#include <peripheral_clk_config.h> - -#ifndef CONF_USART_7_ENABLE -#define CONF_USART_7_ENABLE 1 -#endif - -// <h> Basic Configuration - -// <o> Frame parity -// <0x0=>Even parity -// <0x1=>Odd parity -// <0x2=>Parity forced to 0 -// <0x3=>Parity forced to 1 -// <0x4=>No parity -// <i> Parity bit mode for USART frame -// <id> usart_parity -#ifndef CONF_USART_7_PARITY -#define CONF_USART_7_PARITY 0x4 -#endif - -// <o> Character Size -// <0x0=>5 bits -// <0x1=>6 bits -// <0x2=>7 bits -// <0x3=>8 bits -// <i> Data character size in USART frame -// <id> usart_character_size -#ifndef CONF_USART_7_CHSIZE -#define CONF_USART_7_CHSIZE 0x3 -#endif - -// <o> Stop Bit -// <0=>1 stop bit -// <1=>1.5 stop bits -// <2=>2 stop bits -// <i> Number of stop bits in USART frame -// <id> usart_stop_bit -#ifndef CONF_USART_7_SBMODE -#define CONF_USART_7_SBMODE 0 -#endif - -// <o> Clock Output Select -// <0=>The USART does not drive the SCK pin -// <1=>The USART drives the SCK pin if USCLKS does not select the external clock SCK -// <i> Clock Output Select in USART sck, if in usrt master mode, please drive SCK. -// <id> usart_clock_output_select -#ifndef CONF_USART_7_CLKO -#define CONF_USART_7_CLKO 0 -#endif - -// <o> Baud rate <1-3000000> -// <i> USART baud rate setting -// <id> usart_baud_rate -#ifndef CONF_USART_7_BAUD -#define CONF_USART_7_BAUD 9600 -#endif - -// </h> - -// <e> Advanced configuration -// <id> usart_advanced -#ifndef CONF_USART_7_ADVANCED_CONFIG -#define CONF_USART_7_ADVANCED_CONFIG 0 -#endif - -// <o> Channel Mode -// <0=>Normal Mode -// <1=>Automatic Echo -// <2=>Local Loopback -// <3=>Remote Loopback -// <i> Channel mode in USART frame -// <id> usart_channel_mode -#ifndef CONF_USART_7_CHMODE -#define CONF_USART_7_CHMODE 0 -#endif - -// <q> 9 bits character enable -// <i> Enable 9 bits character, this has high priority than 5/6/7/8 bits. -// <id> usart_9bits_enable -#ifndef CONF_USART_7_MODE9 -#define CONF_USART_7_MODE9 0 -#endif - -// <o> Variable Sync -// <0=>User defined configuration -// <1=>sync field is updated when a character is written into US_THR -// <i> Variable Synchronization of Command/Data Sync Start Frarm Delimiter -// <id> variable_sync -#ifndef CONF_USART_7_VAR_SYNC -#define CONF_USART_7_VAR_SYNC 0 -#endif - -// <o> Oversampling Mode -// <0=>16 Oversampling -// <1=>8 Oversampling -// <i> Oversampling Mode in UART mode -// <id> usart__oversampling_mode -#ifndef CONF_USART_7_OVER -#define CONF_USART_7_OVER 0 -#endif - -// <o> Inhibit Non Ack -// <0=>The NACK is generated -// <1=>The NACK is not generated -// <i> Inhibit Non Acknowledge -// <id> usart__inack -#ifndef CONF_USART_7_INACK -#define CONF_USART_7_INACK 1 -#endif - -// <o> Disable Successive NACK -// <0=>NACK is sent on the ISO line as soon as a parity error occurs -// <1=>Many parity errors generate a NACK on the ISO line -// <i> Disable Successive NACK -// <id> usart_dsnack -#ifndef CONF_USART_7_DSNACK -#define CONF_USART_7_DSNACK 0 -#endif - -// <o> Inverted Data -// <0=>Data isn't inverted, nomal mode -// <1=>Data is inverted -// <i> Inverted Data -// <id> usart_invdata -#ifndef CONF_USART_7_INVDATA -#define CONF_USART_7_INVDATA 0 -#endif - -// <o> Maximum Number of Automatic Iteration <0-7> -// <i> Defines the maximum number of iterations in mode ISO7816, protocol T = 0. -// <id> usart_max_iteration -#ifndef CONF_USART_7_MAX_ITERATION -#define CONF_USART_7_MAX_ITERATION 0 -#endif - -// <q> Receive Line Filter enable -// <i> whether the USART filters the receive line using a three-sample filter -// <id> usart_receive_filter_enable -#ifndef CONF_USART_7_FILTER -#define CONF_USART_7_FILTER 0 -#endif - -// <q> Manchester Encoder/Decoder Enable -// <i> whether the USART Manchester Encoder/Decoder -// <id> usart_manchester_filter_enable -#ifndef CONF_USART_7_MAN -#define CONF_USART_7_MAN 0 -#endif - -// <o> Manchester Synchronization Mode -// <0=>The Manchester start bit is a 0 to 1 transition -// <1=>The Manchester start bit is a 1 to 0 transition -// <i> Manchester Synchronization Mode -// <id> usart_manchester_synchronization_mode -#ifndef CONF_USART_7_MODSYNC -#define CONF_USART_7_MODSYNC 0 -#endif - -// <o> Start Frame Delimiter Selector -// <0=>Start frame delimiter is COMMAND or DATA SYNC -// <1=>Start frame delimiter is one bit -// <i> Start Frame Delimiter Selector -// <id> usart_start_frame_delimiter -#ifndef CONF_USART_7_ONEBIT -#define CONF_USART_7_ONEBIT 0 -#endif - -// <o> Fractional Part <0-7> -// <i> Fractional part of the baud rate if baud rate generator is in fractional mode -// <id> usart_arch_fractional -#ifndef CONF_USART_7_FRACTIONAL -#define CONF_USART_7_FRACTIONAL 0x0 -#endif - -// <o> Data Order -// <0=>LSB is transmitted first -// <1=>MSB is transmitted first -// <i> Data order of the data bits in the frame -// <id> usart_arch_msbf -#ifndef CONF_USART_7_MSBF -#define CONF_USART_7_MSBF 0 -#endif - -// </e> - -#define CONF_USART_7_MODE 0x0 - -// Calculate BAUD register value in UART mode -#if CONF_FLEXCOM7_CK_SRC < 3 -#ifndef CONF_USART_7_BAUD_CD -#define CONF_USART_7_BAUD_CD ((CONF_FLEXCOM7_FREQUENCY) / CONF_USART_7_BAUD / 8 / (2 - CONF_USART_7_OVER)) -#endif -#ifndef CONF_USART_7_BAUD_FP -#define CONF_USART_7_BAUD_FP \ - ((CONF_FLEXCOM7_FREQUENCY) / CONF_USART_7_BAUD / (2 - CONF_USART_7_OVER) - 8 * CONF_USART_7_BAUD_CD) -#endif -#elif CONF_FLEXCOM7_CK_SRC == 3 -// No division is active. The value written in US_BRGR has no effect. -#ifndef CONF_USART_7_BAUD_CD -#define CONF_USART_7_BAUD_CD 1 -#endif -#ifndef CONF_USART_7_BAUD_FP -#define CONF_USART_7_BAUD_FP 1 -#endif -#endif - -// <<< end of configuration section >>> - -#endif // HPL_USART_CONFIG_H diff --git a/tinyusb/hw/bsp/samg55xplained/peripheral_clk_config.h b/tinyusb/hw/bsp/samg55xplained/peripheral_clk_config.h deleted file mode 100755 index 6d390f38..00000000 --- a/tinyusb/hw/bsp/samg55xplained/peripheral_clk_config.h +++ /dev/null @@ -1,85 +0,0 @@ -/* Auto-generated config file peripheral_clk_config.h */ -#ifndef PERIPHERAL_CLK_CONFIG_H -#define PERIPHERAL_CLK_CONFIG_H - -// <<< Use Configuration Wizard in Context Menu >>> - -/** - * \def CONF_HCLK_FREQUENCY - * \brief HCLK's Clock frequency - */ -#ifndef CONF_HCLK_FREQUENCY -#define CONF_HCLK_FREQUENCY 8000000 -#endif - -/** - * \def CONF_FCLK_FREQUENCY - * \brief FCLK's Clock frequency - */ -#ifndef CONF_FCLK_FREQUENCY -#define CONF_FCLK_FREQUENCY 8000000 -#endif - -/** - * \def CONF_CPU_FREQUENCY - * \brief CPU's Clock frequency - */ -#ifndef CONF_CPU_FREQUENCY -#define CONF_CPU_FREQUENCY 8000000 -#endif - -/** - * \def CONF_SLCK_FREQUENCY - * \brief Slow Clock frequency - */ -#define CONF_SLCK_FREQUENCY 32768 - -/** - * \def CONF_MCK_FREQUENCY - * \brief Master Clock frequency - */ -#define CONF_MCK_FREQUENCY 8000000 - -// <o> USB Clock Source -// <0=> USB Clock Controller (USB_48M) -// <id> usb_clock_source -// <i> Select the clock source for USB. -#ifndef CONF_UDP_SRC -#define CONF_UDP_SRC 0 -#endif - -/** - * \def CONF_UDP_FREQUENCY - * \brief UDP's Clock frequency - */ -#ifndef CONF_UDP_FREQUENCY -#define CONF_UDP_FREQUENCY 48005120 -#endif - -// <h> FLEXCOM Clock Settings -// <o> FLEXCOM Clock source -// <0=> Master Clock (MCK) -// <1=> MCK / 8 -// <2=> Programmable Clock Controller 6 (PMC_PCK6) -// <2=> Programmable Clock Controller 7 (PMC_PCK7) -// <3=> External Clock -// <i> This defines the clock source for the FLEXCOM, PCK6 is used for FLEXCOM0/1/2/3 and PCK7 is used for FLEXCOM4/5/6/7 -// <id> flexcom_clock_source -#ifndef CONF_FLEXCOM7_CK_SRC -#define CONF_FLEXCOM7_CK_SRC 0 -#endif - -// <o> FLEXCOM External Clock Input on SCK <1-4294967295> -// <i> Inputs the external clock frequency on SCK -// <id> flexcom_clock_freq -#ifndef CONF_FLEXCOM7_SCK_FREQ -#define CONF_FLEXCOM7_SCK_FREQ 10000000 -#endif - -#ifndef CONF_FLEXCOM7_FREQUENCY -#define CONF_FLEXCOM7_FREQUENCY 8000000 -#endif - -// <<< end of configuration section >>> - -#endif // PERIPHERAL_CLK_CONFIG_H diff --git a/tinyusb/hw/bsp/samg55xplained/samg55j19_flash.ld b/tinyusb/hw/bsp/samg55xplained/samg55j19_flash.ld deleted file mode 100755 index 21c0b5bc..00000000 --- a/tinyusb/hw/bsp/samg55xplained/samg55j19_flash.ld +++ /dev/null @@ -1,158 +0,0 @@ -/** - * \file - * - * \brief GCC linker script (flash) for ATSAMG55J19 - * - * Copyright (c) 2017 Atmel Corporation, a wholly owned subsidiary of Microchip Technology Inc. - * - * \license_start - * - * \page License - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \license_stop - * - */ - -/*------------------------------------------------------------------------------ - * Linker script for running in internal FLASH on the ATSAMG55J19 - *----------------------------------------------------------------------------*/ - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00400000, LENGTH = 0x00080000 /* rom, 524288K */ - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00028000 /* ram, 163840K */ -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x0400; - -/* The heapsize used by the application. NOTE: you need to adjust according to your application. */ -HEAP_SIZE = DEFINED(HEAP_SIZE) ? HEAP_SIZE : DEFINED(__heap_size__) ? __heap_size__ : 0x0200; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(0x4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* heap section */ - .heap (NOLOAD): - { - . = ALIGN(8); - _sheap = .; - . = . + HEAP_SIZE; - . = ALIGN(8); - _eheap = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; - _ram_end_ = ORIGIN(ram) + LENGTH(ram) - 1 ; -} diff --git a/tinyusb/hw/bsp/samg55xplained/samg55xplained.c b/tinyusb/hw/bsp/samg55xplained/samg55xplained.c deleted file mode 100755 index ed106b06..00000000 --- a/tinyusb/hw/bsp/samg55xplained/samg55xplained.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019, hathach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#include "sam.h" -#include "bsp/board.h" - -#include "peripheral_clk_config.h" -#include "hal/include/hal_init.h" -#include "hal/include/hpl_usart_sync.h" -#include "hpl/pmc/hpl_pmc.h" -#include "hal/include/hal_gpio.h" - - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ - -#define LED_PIN GPIO(GPIO_PORTA, 6) - -#define BUTTON_PIN GPIO(GPIO_PORTA, 2) -#define BUTTON_STATE_ACTIVE 0 - -#define UART_TX_PIN GPIO(GPIO_PORTA, 28) -#define UART_RX_PIN GPIO(GPIO_PORTA, 27) - -struct _usart_sync_device edbg_com; - -//------------- IMPLEMENTATION -------------// -void board_init(void) -{ - init_mcu(); - - _pmc_enable_periph_clock(ID_PIOA); - - /* Disable Watchdog */ - hri_wdt_set_MR_WDDIS_bit(WDT); - - // LED - gpio_set_pin_level(LED_PIN, false); - gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); - gpio_set_pin_function(LED_PIN, GPIO_PIN_FUNCTION_OFF); - - // Button - gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); - gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP); - gpio_set_pin_function(BUTTON_PIN, GPIO_PIN_FUNCTION_OFF); - - // Uart via EDBG Com - _pmc_enable_periph_clock(ID_FLEXCOM7); - gpio_set_pin_function(UART_RX_PIN, MUX_PA27B_FLEXCOM7_RXD); - gpio_set_pin_function(UART_TX_PIN, MUX_PA28B_FLEXCOM7_TXD); - - _usart_sync_init(&edbg_com, FLEXCOM7); - _usart_sync_set_baud_rate(&edbg_com, CFG_BOARD_UART_BAUDRATE); - _usart_sync_set_mode(&edbg_com, USART_MODE_ASYNCHRONOUS); - _usart_sync_enable(&edbg_com); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer (samd SystemCoreClock may not correct) - SysTick_Config(CONF_CPU_FREQUENCY / 1000); -#endif - - // USB Pin, Clock init - - /* Clear SYSIO 10 & 11 for USB DM & DP */ - hri_matrix_clear_CCFG_SYSIO_reg(MATRIX, CCFG_SYSIO_SYSIO10 | CCFG_SYSIO_SYSIO11); - - // Enable clock - _pmc_enable_periph_clock(ID_UDP); - - /* USB Device mode & Transceiver active */ - hri_matrix_write_CCFG_USBMR_reg(MATRIX, CCFG_USBMR_USBMODE); -} - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void UDP_Handler(void) -{ - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - tud_int_handler(0); - #endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - gpio_set_pin_level(LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == gpio_get_pin_level(BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - uint8_t const * buf8 = (uint8_t const *) buf; - for(int i=0; i<len; i++) - { - while ( !_usart_sync_is_ready_to_send(&edbg_com) ) {} - _usart_sync_write_byte(&edbg_com, buf8[i]); - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/tinyusb/hw/bsp/saml2x/boards/atsaml21_xpro/board.h b/tinyusb/hw/bsp/saml2x/boards/atsaml21_xpro/board.h deleted file mode 100755 index a3e03997..00000000 --- a/tinyusb/hw/bsp/saml2x/boards/atsaml21_xpro/board.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN (32 + 30) // PB30 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PIN (0 + 15) // PA15 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 4 -#define UART_TX_PIN 5 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/saml2x/boards/atsaml21_xpro/board.mk b/tinyusb/hw/bsp/saml2x/boards/atsaml21_xpro/board.mk deleted file mode 100755 index 81b4ecdc..00000000 --- a/tinyusb/hw/bsp/saml2x/boards/atsaml21_xpro/board.mk +++ /dev/null @@ -1,12 +0,0 @@ -CFLAGS += -D__SAML21J18B__ - -SAML_VARIANT = saml21 - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/saml21j18b_flash.ld - -# For flash-jlink target -JLINK_DEVICE = ATSAML21J18 - -# flash using jlink -flash: flash-jlink diff --git a/tinyusb/hw/bsp/saml2x/boards/atsaml21_xpro/saml21j18b_flash.ld b/tinyusb/hw/bsp/saml2x/boards/atsaml21_xpro/saml21j18b_flash.ld deleted file mode 100755 index 7f6b7fa9..00000000 --- a/tinyusb/hw/bsp/saml2x/boards/atsaml21_xpro/saml21j18b_flash.ld +++ /dev/null @@ -1,153 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAML21J18B - * - * Copyright (c) 2016 Atmel Corporation, - * a wholly owned subsidiary of Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000 - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 - lpram (rwx) : ORIGIN = 0x30000000, LENGTH = 0x00002000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - .lpram (NOLOAD): - { - . = ALIGN(8); - _slpram = .; - *(.lpram .lpram.*); - . = ALIGN(8); - _elpram = .; - } > lpram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/saml2x/boards/saml22_feather/board.h b/tinyusb/hw/bsp/saml2x/boards/saml22_feather/board.h deleted file mode 100755 index 13a32600..00000000 --- a/tinyusb/hw/bsp/saml2x/boards/saml22_feather/board.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN PIN_PA08 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN PIN_PA06 -#define BUTTON_STATE_ACTIVE 0 - - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/saml2x/boards/saml22_feather/board.mk b/tinyusb/hw/bsp/saml2x/boards/saml22_feather/board.mk deleted file mode 100755 index 0605dca1..00000000 --- a/tinyusb/hw/bsp/saml2x/boards/saml22_feather/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -D__SAML22J18A__ - -SAML_VARIANT = saml22 - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAML22J18 - -flash: flash-bossac diff --git a/tinyusb/hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld b/tinyusb/hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld deleted file mode 100755 index d1aaa44f..00000000 --- a/tinyusb/hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld +++ /dev/null @@ -1,146 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAML22J18A - * - * Copyright (c) 2018 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000 - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/saml2x/boards/sensorwatch_m0/board.h b/tinyusb/hw/bsp/saml2x/boards/sensorwatch_m0/board.h deleted file mode 100755 index 7fc690ab..00000000 --- a/tinyusb/hw/bsp/saml2x/boards/sensorwatch_m0/board.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN PIN_PA21 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN PIN_PA22 -#define BUTTON_STATE_ACTIVE 1 - - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/saml2x/boards/sensorwatch_m0/board.mk b/tinyusb/hw/bsp/saml2x/boards/sensorwatch_m0/board.mk deleted file mode 100755 index 0605dca1..00000000 --- a/tinyusb/hw/bsp/saml2x/boards/sensorwatch_m0/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -D__SAML22J18A__ - -SAML_VARIANT = saml22 - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAML22J18 - -flash: flash-bossac diff --git a/tinyusb/hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld b/tinyusb/hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld deleted file mode 100755 index d1aaa44f..00000000 --- a/tinyusb/hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld +++ /dev/null @@ -1,146 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAML22J18A - * - * Copyright (c) 2018 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000 - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/saml2x/family.c b/tinyusb/hw/bsp/saml2x/family.c deleted file mode 100755 index 470fde75..00000000 --- a/tinyusb/hw/bsp/saml2x/family.c +++ /dev/null @@ -1,163 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "sam.h" -#include "bsp/board.h" -#include "board.h" - -#include "hal/include/hal_gpio.h" -#include "hal/include/hal_init.h" -#include "hpl/gclk/hpl_gclk_base.h" -#include "hpl_mclk_config.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_Handler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ - -/* Referenced GCLKs (out of 0~4), should be initialized firstly */ -#define _GCLK_INIT_1ST 0x00000000 -/* Not referenced GCLKs, initialized last */ -#define _GCLK_INIT_LAST 0x0000001F - -void board_init(void) -{ - // Clock init ( follow hpl_init.c ) - hri_nvmctrl_set_CTRLB_RWS_bf(NVMCTRL, CONF_NVM_WAIT_STATE); - - _set_performance_level(2); - - _osc32kctrl_init_sources(); - _oscctrl_init_sources(); - _mclk_init(); -#if _GCLK_INIT_1ST - _gclk_init_generators_by_fref(_GCLK_INIT_1ST); -#endif - _oscctrl_init_referenced_generators(); - _gclk_init_generators_by_fref(_GCLK_INIT_LAST); - -#if (CONF_PORT_EVCTRL_PORT_0 | CONF_PORT_EVCTRL_PORT_1 | CONF_PORT_EVCTRL_PORT_2 | CONF_PORT_EVCTRL_PORT_3) - hri_port_set_EVCTRL_reg(PORT, 0, CONF_PORTA_EVCTRL); - hri_port_set_EVCTRL_reg(PORT, 1, CONF_PORTB_EVCTRL); -#endif - - // Update SystemCoreClock since it is hard coded with asf4 and not correct - // Init 1ms tick timer (samd SystemCoreClock may not correct) - SystemCoreClock = CONF_CPU_FREQUENCY; - SysTick_Config(CONF_CPU_FREQUENCY / 1000); - - // Led init - gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); - gpio_set_pin_level(LED_PIN, !LED_STATE_ON); - - // Button init - gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); - gpio_set_pin_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULL_DOWN : GPIO_PULL_UP); - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - - /* USB Clock init - * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock - * for low speed and full speed operation. */ - hri_gclk_write_PCHCTRL_reg(GCLK, USB_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK1_Val | GCLK_PCHCTRL_CHEN); - hri_mclk_set_AHBMASK_USB_bit(MCLK); - hri_mclk_set_APBBMASK_USB_bit(MCLK); - - // USB Pin Init - gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA24, false); - gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); - gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA25, false); - gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); - - gpio_set_pin_function(PIN_PA24, PINMUX_PA24G_USB_DM); - gpio_set_pin_function(PIN_PA25, PINMUX_PA25G_USB_DP); - - // Output 500hz PWM on PB23 (TCC0 WO[3]) so we can validate the GCLK1 clock speed -// hri_mclk_set_APBCMASK_TCC0_bit(MCLK); -// TCC0->PER.bit.PER = 48000000 / 1000; -// TCC0->CC[3].bit.CC = 48000000 / 2000; -// TCC0->CTRLA.bit.ENABLE = true; -// -// gpio_set_pin_function(PIN_PB23, PINMUX_PB23F_TCC0_WO3); -// hri_gclk_write_PCHCTRL_reg(GCLK, TCC0_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK1_Val | GCLK_PCHCTRL_CHEN); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - gpio_set_pin_level(LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - // button is active low - return gpio_get_pin_level(BUTTON_PIN) ? 0 : 1; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif -void _init(void) -{ - -} diff --git a/tinyusb/hw/bsp/saml2x/family.mk b/tinyusb/hw/bsp/saml2x/family.mk deleted file mode 100755 index e0f6b2f7..00000000 --- a/tinyusb/hw/bsp/saml2x/family.mk +++ /dev/null @@ -1,48 +0,0 @@ -UF2_FAMILY_ID = 0x68ed2b88 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/microchip - -include $(TOP)/$(BOARD_PATH)/board.mk - -MCU_DIR = hw/mcu/microchip/$(SAML_VARIANT) - -CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ - -nostdlib -nostartfiles \ - -DCONF_OSC32K_CALIB_ENABLE=0 \ - -DCFG_TUSB_MCU=OPT_MCU_SAML22 - -SRC_C += \ - src/portable/microchip/samd/dcd_samd.c \ - $(MCU_DIR)/gcc/gcc/startup_$(SAML_VARIANT).c \ - $(MCU_DIR)/gcc/system_$(SAML_VARIANT).c \ - $(MCU_DIR)/hpl/gclk/hpl_gclk.c \ - $(MCU_DIR)/hpl/mclk/hpl_mclk.c \ - $(MCU_DIR)/hpl/pm/hpl_pm.c \ - $(MCU_DIR)/hpl/osc32kctrl/hpl_osc32kctrl.c \ - $(MCU_DIR)/hpl/oscctrl/hpl_oscctrl.c \ - $(MCU_DIR)/hal/src/hal_atomic.c - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(MCU_DIR)/ \ - $(TOP)/$(MCU_DIR)/config \ - $(TOP)/$(MCU_DIR)/include \ - $(TOP)/$(MCU_DIR)/hal/include \ - $(TOP)/$(MCU_DIR)/hal/utils/include \ - $(TOP)/$(MCU_DIR)/hpl/port \ - $(TOP)/$(MCU_DIR)/hri \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM0 - -# flash using bossac at least version 1.8 -# can be found in arduino15/packages/arduino/tools/bossac/ -# Add it to your PATH or change BOSSAC variable to match your installation -BOSSAC = bossac - -flash-bossac: $(BUILD)/$(PROJECT).bin - @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) - $(BOSSAC) --port=$(SERIAL) -U -i --offset=0x2000 -e -w $^ -R diff --git a/tinyusb/hw/bsp/sltb009a/board.mk b/tinyusb/hw/bsp/sltb009a/board.mk deleted file mode 100755 index e8a24d1b..00000000 --- a/tinyusb/hw/bsp/sltb009a/board.mk +++ /dev/null @@ -1,47 +0,0 @@ -CFLAGS += \ - -flto \ - -mthumb \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib -nostartfiles \ - -D__STARTUP_CLEAR_BSS \ - -D__START=main \ - -DEFM32GG12B810F1024GM64 \ - -DCFG_TUSB_MCU=OPT_MCU_EFM32GG12 - -# mcu driver cause following warnings -#CFLAGS += -Wno-error=unused-parameter - -SILABS_FAMILY = efm32gg12b -SILABS_CMSIS = hw/mcu/silabs/cmsis-dfp-$(SILABS_FAMILY)/Device/SiliconLabs/$(shell echo $(SILABS_FAMILY) | tr a-z A-Z) - -DEPS_SUBMODULES += hw/mcu/silabs/cmsis-dfp-$(SILABS_FAMILY) -DEPS_SUBMODULES += lib/CMSIS_5 - -# All source paths should be relative to the top level. -LD_FILE = $(SILABS_CMSIS)/Source/GCC/$(SILABS_FAMILY).ld - -SRC_C += \ - $(SILABS_CMSIS)/Source/system_$(SILABS_FAMILY).c \ - src/portable/silabs/efm32/dcd_efm32.c - -SRC_S += \ - $(SILABS_CMSIS)/Source/GCC/startup_$(SILABS_FAMILY).S - -INC += \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(SILABS_CMSIS)/Include \ - $(TOP)/hw/bsp/$(BOARD) - -# For TinyUSB port source -VENDOR = silabs -CHIP_FAMILY = efm32 - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM4 - -# For flash-jlink target -JLINK_DEVICE = EFM32GG12B810F1024 - -flash: flash-jlink diff --git a/tinyusb/hw/bsp/sltb009a/sltb009a.c b/tinyusb/hw/bsp/sltb009a/sltb009a.c deleted file mode 100755 index b929adb1..00000000 --- a/tinyusb/hw/bsp/sltb009a/sltb009a.c +++ /dev/null @@ -1,721 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021 Rafael Silva (@perigoso) - * Copyright (c) 2021 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../board.h" - -#include "em_device.h" - -/*--------------------------------------------------------------------*/ -/* MACRO TYPEDEF CONSTANT ENUM */ -/*--------------------------------------------------------------------*/ - -#define LED_PORT 0 // A -#define LED_PIN_R 12 // 12 -#define LED_PIN_B 13 // 13 -#define LED_PIN_G 14 // 14 -#define LED_STATE_ON 0 // active-low - -#define BUTTON_PORT 3 // D -#define BUTTON_PIN 5 // 5 -#define BUTTON_STATE_ACTIVE 0 // active-low - -/*--------------------------------------------------------------------*/ -/* Forward USB interrupt events to TinyUSB IRQ Handler */ -/*--------------------------------------------------------------------*/ - -void USB_IRQHandler(void) -{ - tud_int_handler(0); -} - -/*--------------------------------------------------------------------*/ -/* Fault Handlers */ -/*--------------------------------------------------------------------*/ - -void HardFault_Handler(void) -{ - asm("bkpt"); -} - -void MemManage_Handler(void) -{ - asm("bkpt"); -} - -void BusFault_Handler(void) -{ - asm("bkpt"); -} - -void UsageFault_Handler(void) -{ - asm("bkpt"); -} - -/*--------------------------------------------------------------------*/ -/* Startup */ -/*--------------------------------------------------------------------*/ - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} - -/*--------------------------------------------------------------------*/ -/* Initing Funcs */ -/*--------------------------------------------------------------------*/ - -void emu_init(uint8_t immediate_switch) -{ - EMU->PWRCTRL = (immediate_switch ? EMU_PWRCTRL_IMMEDIATEPWRSWITCH : 0) | EMU_PWRCTRL_REGPWRSEL_DVDD | EMU_PWRCTRL_ANASW_AVDD; -} - -void emu_reg_init(float target_voltage) -{ - if(target_voltage < 2300.f || target_voltage >= 3800.f) - return; - - uint8_t level = ((target_voltage - 2300.f) / 100.f); - - EMU->R5VCTRL = EMU_R5VCTRL_INPUTMODE_AUTO; - - EMU->R5VOUTLEVEL = level; /* Reg output to 3.3V*/ -} - -void emu_dcdc_init(float target_voltage, float max_ln_current, float max_lp_current, float max_reverse_current) -{ - if(target_voltage < 1800.f || target_voltage >= 3000.f) - return; - - if(max_ln_current <= 0.f || max_ln_current > 200.f) - return; - - if(max_lp_current <= 0.f || max_lp_current > 10000.f) - return; - - if(max_reverse_current < 0.f || max_reverse_current > 160.f) - return; - - // Low Power & Low Noise current limit - uint8_t lp_bias = 0; - - if(max_lp_current < 75.f) - lp_bias = 0; - else if(max_lp_current < 500.f) - lp_bias = 1; - else if(max_lp_current < 2500.f) - lp_bias = 2; - else - lp_bias = 3; - - EMU->DCDCMISCCTRL = (EMU->DCDCMISCCTRL & ~_EMU_DCDCMISCCTRL_LPCMPBIASEM234H_MASK) | ((uint32_t)lp_bias << _EMU_DCDCMISCCTRL_LPCMPBIASEM234H_SHIFT); - EMU->DCDCMISCCTRL |= EMU_DCDCMISCCTRL_LNFORCECCM; // Force CCM to prevent reverse current - EMU->DCDCLPCTRL |= EMU_DCDCLPCTRL_LPVREFDUTYEN; // Enable duty cycling of the bias for LP mode - EMU->DCDCLNFREQCTRL = (EMU->DCDCLNFREQCTRL & ~_EMU_DCDCLNFREQCTRL_RCOBAND_MASK) | 4; // Set RCO Band to 7MHz - - uint8_t fet_count = 0; - - if(max_ln_current < 20.f) - fet_count = 4; - else if(max_ln_current >= 20.f && max_ln_current < 40.f) - fet_count = 8; - else - fet_count = 16; - - EMU->DCDCMISCCTRL = (EMU->DCDCMISCCTRL & ~_EMU_DCDCMISCCTRL_NFETCNT_MASK) | ((uint32_t)(fet_count - 1) << _EMU_DCDCMISCCTRL_NFETCNT_SHIFT); - EMU->DCDCMISCCTRL = (EMU->DCDCMISCCTRL & ~_EMU_DCDCMISCCTRL_PFETCNT_MASK) | ((uint32_t)(fet_count - 1) << _EMU_DCDCMISCCTRL_PFETCNT_SHIFT); - - uint8_t ln_current_limit = (((max_ln_current + 40.f) * 1.5f) / (5.f * fet_count)) - 1; - uint8_t lp_current_limit = 1; // Recommended value - - EMU->DCDCMISCCTRL = (EMU->DCDCMISCCTRL & ~(_EMU_DCDCMISCCTRL_LNCLIMILIMSEL_MASK | _EMU_DCDCMISCCTRL_LPCLIMILIMSEL_MASK)) | ((uint32_t)ln_current_limit << _EMU_DCDCMISCCTRL_LNCLIMILIMSEL_SHIFT) | ((uint32_t)lp_current_limit << _EMU_DCDCMISCCTRL_LPCLIMILIMSEL_SHIFT); - - uint8_t z_det_limit = ((max_reverse_current + 40.f) * 1.5f) / (2.5f * fet_count); - - EMU->DCDCZDETCTRL = (EMU->DCDCZDETCTRL & ~_EMU_DCDCZDETCTRL_ZDETILIMSEL_MASK) | ((uint32_t)z_det_limit << _EMU_DCDCZDETCTRL_ZDETILIMSEL_SHIFT); - - EMU->DCDCCLIMCTRL |= EMU_DCDCCLIMCTRL_BYPLIMEN; // Enable bypass current limiter to prevent overcurrent when switching modes - - // Output Voltage - if(target_voltage > 1800.f) - { - float max_vout = 3000.f; - float min_vout = 1800.f; - float diff_vout = max_vout - min_vout; - - uint8_t ln_vref_high = (DEVINFO->DCDCLNVCTRL0 & _DEVINFO_DCDCLNVCTRL0_3V0LNATT1_MASK) >> _DEVINFO_DCDCLNVCTRL0_3V0LNATT1_SHIFT; - uint8_t ln_vref_low = (DEVINFO->DCDCLNVCTRL0 & _DEVINFO_DCDCLNVCTRL0_1V8LNATT1_MASK) >> _DEVINFO_DCDCLNVCTRL0_1V8LNATT1_SHIFT; - - uint8_t ln_vref = ((target_voltage - min_vout) * (float)(ln_vref_high - ln_vref_low)) / diff_vout; - ln_vref += ln_vref_low; - - EMU->DCDCLNVCTRL = (ln_vref << _EMU_DCDCLNVCTRL_LNVREF_SHIFT) | EMU_DCDCLNVCTRL_LNATT; - - uint8_t lp_vref_low = 0; - uint8_t lp_vref_high = 0; - - switch(lp_bias) - { - case 0: - { - lp_vref_high = (DEVINFO->DCDCLPVCTRL2 & _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS0_MASK) >> _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS0_SHIFT; - lp_vref_low = (DEVINFO->DCDCLPVCTRL2 & _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS0_MASK) >> _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS0_SHIFT; - } - break; - case 1: - { - lp_vref_high = (DEVINFO->DCDCLPVCTRL2 & _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS1_MASK) >> _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS1_SHIFT; - lp_vref_low = (DEVINFO->DCDCLPVCTRL2 & _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS1_MASK) >> _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS1_SHIFT; - } - break; - case 2: - { - lp_vref_high = (DEVINFO->DCDCLPVCTRL3 & _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS2_MASK) >> _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS2_SHIFT; - lp_vref_low = (DEVINFO->DCDCLPVCTRL3 & _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS2_MASK) >> _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS2_SHIFT; - } - break; - case 3: - { - lp_vref_high = (DEVINFO->DCDCLPVCTRL3 & _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS3_MASK) >> _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS3_SHIFT; - lp_vref_low = (DEVINFO->DCDCLPVCTRL3 & _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS3_MASK) >> _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS3_SHIFT; - } - break; - } - - uint8_t lp_vref = ((target_voltage - min_vout) * (float)(lp_vref_high - lp_vref_low)) / diff_vout; - lp_vref += lp_vref_low; - - EMU->DCDCLPVCTRL = (lp_vref << _EMU_DCDCLPVCTRL_LPVREF_SHIFT) | EMU_DCDCLPVCTRL_LPATT; - } - else - { - float max_vout = 1800.f; - float min_vout = 1200.f; - float diff_vout = max_vout - min_vout; - - uint8_t ln_vref_high = (DEVINFO->DCDCLNVCTRL0 & _DEVINFO_DCDCLNVCTRL0_1V8LNATT0_MASK) >> _DEVINFO_DCDCLNVCTRL0_1V8LNATT0_SHIFT; - uint8_t ln_vref_low = (DEVINFO->DCDCLNVCTRL0 & _DEVINFO_DCDCLNVCTRL0_1V2LNATT0_MASK) >> _DEVINFO_DCDCLNVCTRL0_1V2LNATT0_SHIFT; - - uint8_t ln_vref = ((target_voltage - min_vout) * (float)(ln_vref_high - ln_vref_low)) / diff_vout; - ln_vref += ln_vref_low; - - EMU->DCDCLNVCTRL = ln_vref << _EMU_DCDCLNVCTRL_LNVREF_SHIFT; - - uint8_t lp_vref_low = 0; - uint8_t lp_vref_high = 0; - - switch(lp_bias) - { - case 0: - { - lp_vref_high = (DEVINFO->DCDCLPVCTRL0 & _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS0_MASK) >> _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS0_SHIFT; - lp_vref_low = (DEVINFO->DCDCLPVCTRL0 & _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS0_MASK) >> _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS0_SHIFT; - } - break; - case 1: - { - lp_vref_high = (DEVINFO->DCDCLPVCTRL0 & _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS1_MASK) >> _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS1_SHIFT; - lp_vref_low = (DEVINFO->DCDCLPVCTRL0 & _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS1_MASK) >> _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS1_SHIFT; - } - break; - case 2: - { - lp_vref_high = (DEVINFO->DCDCLPVCTRL1 & _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS2_MASK) >> _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS2_SHIFT; - lp_vref_low = (DEVINFO->DCDCLPVCTRL1 & _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS2_MASK) >> _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS2_SHIFT; - } - break; - case 3: - { - lp_vref_high = (DEVINFO->DCDCLPVCTRL1 & _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS3_MASK) >> _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS3_SHIFT; - lp_vref_low = (DEVINFO->DCDCLPVCTRL1 & _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS3_MASK) >> _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS3_SHIFT; - } - break; - } - - uint8_t lp_vref = ((target_voltage - min_vout) * (float)(lp_vref_high - lp_vref_low)) / diff_vout; - lp_vref += lp_vref_low; - - EMU->DCDCLPVCTRL = lp_vref << _EMU_DCDCLPVCTRL_LPVREF_SHIFT; - } - - EMU->DCDCLPCTRL = (EMU->DCDCLPCTRL & ~_EMU_DCDCLPCTRL_LPCMPHYSSELEM234H_MASK) | (((DEVINFO->DCDCLPCMPHYSSEL1 & (((uint32_t)0xFF) << (lp_bias * 8))) >> (lp_bias * 8)) << _EMU_DCDCLPCTRL_LPCMPHYSSELEM234H_SHIFT); - - while(EMU->DCDCSYNC & EMU_DCDCSYNC_DCDCCTRLBUSY); // Wait for configuration to write - - // Calibration - //EMU->DCDCLNCOMPCTRL = 0x57204077; // Compensation for 1uF DCDC capacitor - EMU->DCDCLNCOMPCTRL = 0xB7102137; // Compensation for 4.7uF DCDC capacitor - - // Enable DCDC converter - EMU->DCDCCTRL = EMU_DCDCCTRL_DCDCMODEEM4_EM4LOWPOWER | EMU_DCDCCTRL_DCDCMODEEM23_EM23LOWPOWER | EMU_DCDCCTRL_DCDCMODE_LOWNOISE; - - // Switch digital domain to DVDD - EMU->PWRCTRL = EMU_PWRCTRL_REGPWRSEL_DVDD | EMU_PWRCTRL_ANASW_AVDD; -} - -void cmu_hfxo_startup_calib(uint16_t ib_trim, uint16_t c_tune) -{ - if(CMU->STATUS & CMU_STATUS_HFXOENS) - return; - - CMU->HFXOSTARTUPCTRL = (CMU->HFXOSTARTUPCTRL & ~(_CMU_HFXOSTARTUPCTRL_CTUNE_MASK | _CMU_HFXOSTARTUPCTRL_IBTRIMXOCORE_MASK)) | (((uint32_t)c_tune << _CMU_HFXOSTARTUPCTRL_CTUNE_SHIFT) & _CMU_HFXOSTARTUPCTRL_CTUNE_MASK) | (((uint32_t)ib_trim << _CMU_HFXOSTARTUPCTRL_IBTRIMXOCORE_SHIFT) & _CMU_HFXOSTARTUPCTRL_IBTRIMXOCORE_MASK); -} - -void cmu_hfxo_steady_calib(uint16_t ib_trim, uint16_t c_tune) -{ - if(CMU->STATUS & CMU_STATUS_HFXOENS) - return; - - CMU->HFXOSTEADYSTATECTRL = (CMU->HFXOSTEADYSTATECTRL & ~(_CMU_HFXOSTEADYSTATECTRL_CTUNE_MASK | _CMU_HFXOSTEADYSTATECTRL_IBTRIMXOCORE_MASK)) | (((uint32_t)c_tune << _CMU_HFXOSTEADYSTATECTRL_CTUNE_SHIFT) & _CMU_HFXOSTEADYSTATECTRL_CTUNE_MASK) | (((uint32_t)ib_trim << _CMU_HFXOSTEADYSTATECTRL_IBTRIMXOCORE_SHIFT) & _CMU_HFXOSTEADYSTATECTRL_IBTRIMXOCORE_MASK); -} - -void cmu_hfrco_calib(uint32_t calibration) -{ - if(CMU->STATUS & CMU_STATUS_DPLLENS) - return; - - while(CMU->SYNCBUSY & CMU_SYNCBUSY_HFRCOBSY); - - CMU->HFRCOCTRL = calibration; - - while(CMU->SYNCBUSY & CMU_SYNCBUSY_HFRCOBSY); -} - -void cmu_ushfrco_calib(uint8_t enable, uint32_t calibration) -{ - if(CMU->USBCRCTRL & CMU_USBCRCTRL_USBCREN) - return; - - if(!enable) - { - CMU->OSCENCMD = CMU_OSCENCMD_USHFRCODIS; - while(CMU->STATUS & CMU_STATUS_USHFRCOENS); - - return; - } - - while(CMU->SYNCBUSY & CMU_SYNCBUSY_USHFRCOBSY); - - CMU->USHFRCOCTRL = calibration | CMU_USHFRCOCTRL_FINETUNINGEN; - - while(CMU->SYNCBUSY & CMU_SYNCBUSY_USHFRCOBSY); - - if(enable && !(CMU->STATUS & CMU_STATUS_USHFRCOENS)) - { - CMU->OSCENCMD = CMU_OSCENCMD_USHFRCOEN; - - while(!(CMU->STATUS & CMU_STATUS_USHFRCORDY)); - } -} - -void cmu_auxhfrco_calib(uint8_t enable, uint32_t calibration) -{ - if(!enable) - { - CMU->OSCENCMD = CMU_OSCENCMD_AUXHFRCODIS; - while(CMU->STATUS & CMU_STATUS_AUXHFRCOENS); - - return; - } - - while(CMU->SYNCBUSY & CMU_SYNCBUSY_AUXHFRCOBSY); - - CMU->AUXHFRCOCTRL = calibration; - - while(CMU->SYNCBUSY & CMU_SYNCBUSY_AUXHFRCOBSY); - - if(enable && !(CMU->STATUS & CMU_STATUS_AUXHFRCOENS)) - { - CMU->OSCENCMD = CMU_OSCENCMD_AUXHFRCOEN; - - while(!(CMU->STATUS & CMU_STATUS_AUXHFRCORDY)); - } -} - - -void cmu_init(void) -{ - // Change SDIO clock to HFXO if HFRCO selected and disable it - CMU->SDIOCTRL = CMU_SDIOCTRL_SDIOCLKDIS | CMU_SDIOCTRL_SDIOCLKSEL_HFXO; - while(CMU->STATUS & CMU_STATUS_SDIOCLKENS); - - // Change QSPI clock to HFXO if HFRCO selected and disable it - CMU->QSPICTRL = CMU_QSPICTRL_QSPI0CLKDIS | CMU_QSPICTRL_QSPI0CLKSEL_HFXO; - while(CMU->STATUS & CMU_STATUS_QSPI0CLKENS); - - // Disable DPLL if enabled - if(CMU->STATUS & CMU_STATUS_DPLLENS) - { - CMU->OSCENCMD = CMU_OSCENCMD_DPLLDIS; - while(CMU->STATUS & CMU_STATUS_DPLLENS); - } - - // Disable HFXO if enabled - if(CMU->STATUS & CMU_STATUS_HFXOENS) - { - CMU->OSCENCMD = CMU_OSCENCMD_HFXODIS; - while(CMU->STATUS & CMU_STATUS_HFXOENS); - } - - // Setup HFXO - CMU->HFXOCTRL = CMU_HFXOCTRL_PEAKDETMODE_AUTOCMD | CMU_HFXOCTRL_MODE_XTAL; - CMU->HFXOCTRL1 = CMU_HFXOCTRL1_PEAKDETTHR_DEFAULT; - CMU->HFXOSTEADYSTATECTRL |= CMU_HFXOSTEADYSTATECTRL_PEAKMONEN; - CMU->HFXOTIMEOUTCTRL = (7 << _CMU_HFXOTIMEOUTCTRL_PEAKDETTIMEOUT_SHIFT) | (8 << _CMU_HFXOTIMEOUTCTRL_STEADYTIMEOUT_SHIFT) | (12 << _CMU_HFXOTIMEOUTCTRL_STARTUPTIMEOUT_SHIFT); - - // Enable HFXO and wait for it to be ready - CMU->OSCENCMD = CMU_OSCENCMD_HFXOEN; - while(!(CMU->STATUS & CMU_STATUS_HFXORDY)); - - // Switch main clock to HFXO and wait for it to be selected - CMU->HFCLKSEL = CMU_HFCLKSEL_HF_HFXO; - while((CMU->HFCLKSTATUS & _CMU_HFCLKSTATUS_SELECTED_MASK) != CMU_HFCLKSTATUS_SELECTED_HFXO); - - // Calibrate HFRCO for 72MHz and enable tunning by PLL - cmu_hfrco_calib((DEVINFO->HFRCOCAL16) | CMU_HFRCOCTRL_FINETUNINGEN); - - // Setup the PLL - CMU->DPLLCTRL = CMU_DPLLCTRL_REFSEL_HFXO | CMU_DPLLCTRL_AUTORECOVER | CMU_DPLLCTRL_EDGESEL_RISE | CMU_DPLLCTRL_MODE_FREQLL; - // 72MHz = 50MHz (HFXO) * 1.44 (144/100) - CMU->DPLLCTRL1 = (143 << _CMU_DPLLCTRL1_N_SHIFT) | (99 << _CMU_DPLLCTRL1_M_SHIFT); // fHFRCO = fHFXO * (N + 1) / (M + 1) - - // Enable the DPLL and wait for it to be ready - CMU->OSCENCMD = CMU_OSCENCMD_DPLLEN; - while(!(CMU->STATUS & CMU_STATUS_DPLLRDY)); - - // Config peripherals for the new frequency (freq > 32MHz) - CMU->CTRL |= CMU_CTRL_WSHFLE; - - // Set prescalers - CMU->HFPRESC = CMU_HFPRESC_HFCLKLEPRESC_DIV2 | CMU_HFPRESC_PRESC_NODIVISION; - CMU->HFBUSPRESC = 1 << _CMU_HFBUSPRESC_PRESC_SHIFT; - CMU->HFCOREPRESC = 0 << _CMU_HFCOREPRESC_PRESC_SHIFT; - CMU->HFPERPRESC = 1 << _CMU_HFPERPRESC_PRESC_SHIFT; - CMU->HFEXPPRESC = 0 << _CMU_HFEXPPRESC_PRESC_SHIFT; - CMU->HFPERPRESCB = 0 << _CMU_HFPERPRESCB_PRESC_SHIFT; - CMU->HFPERPRESCC = 1 << _CMU_HFPERPRESCC_PRESC_SHIFT; - - // Enable clock to peripherals - CMU->CTRL |= CMU_CTRL_HFPERCLKEN; - - // Switch main clock to HFRCO and wait for it to be selected - CMU->HFCLKSEL = CMU_HFCLKSEL_HF_HFRCO; - while((CMU->HFCLKSTATUS & _CMU_HFCLKSTATUS_SELECTED_MASK) != CMU_HFCLKSTATUS_SELECTED_HFRCO); - - // LFA Clock - CMU->LFACLKSEL = CMU_LFACLKSEL_LFA_LFRCO; - - // LFB Clock - CMU->LFBCLKSEL = CMU_LFBCLKSEL_LFB_LFRCO; - - // LFC Clock - CMU->LFCCLKSEL = CMU_LFCCLKSEL_LFC_LFRCO; - - // LFE Clock - CMU->LFECLKSEL = CMU_LFECLKSEL_LFE_ULFRCO; -} - -void systick_init(void) -{ - SysTick->LOAD = (72000000 / 1000) - 1; - SysTick->VAL = 0; - SysTick->CTRL = SysTick_CTRL_TICKINT_Msk | SysTick_CTRL_ENABLE_Msk | SysTick_CTRL_CLKSOURCE_Msk; - - SCB->SHP[11] = 7 << (8 - __NVIC_PRIO_BITS); // Set priority 3,1 (min) -} - -void gpio_init(void) -{ - CMU->HFBUSCLKEN0 |= CMU_HFBUSCLKEN0_GPIO; - - // NC - Not Connected (not available in mcu package) - // NR - Not routed (no routing to pin on pcb, floating) - // NU - Not used (not currently in use) - - // Port A - GPIO->P[0].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) - | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (6 << _GPIO_P_CTRL_SLEWRATE_SHIFT); - GPIO->P[0].MODEL = GPIO_P_MODEL_MODE0_DISABLED // NU - | GPIO_P_MODEL_MODE1_DISABLED // NU - | GPIO_P_MODEL_MODE2_DISABLED // NU - | GPIO_P_MODEL_MODE3_DISABLED // NU - | GPIO_P_MODEL_MODE4_DISABLED // NU - | GPIO_P_MODEL_MODE5_DISABLED // NU - | GPIO_P_MODEL_MODE6_DISABLED // NU - | GPIO_P_MODEL_MODE7_DISABLED; // NC - GPIO->P[0].MODEH = GPIO_P_MODEH_MODE8_DISABLED // GPIO - MIC_ENABLE - | GPIO_P_MODEH_MODE9_DISABLED // NC - | GPIO_P_MODEH_MODE10_DISABLED // NC - | GPIO_P_MODEH_MODE11_DISABLED // NC - | GPIO_P_MODEH_MODE12_WIREDAND // LED0R - | GPIO_P_MODEH_MODE13_WIREDAND // LED0B - | GPIO_P_MODEH_MODE14_WIREDAND // LED0G - | GPIO_P_MODEH_MODE15_DISABLED; // NU - GPIO->P[0].DOUT = 0x7000; // Leds off By default - GPIO->P[0].OVTDIS = 0; - - // Port B - GPIO->P[1].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) - | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (6 << _GPIO_P_CTRL_SLEWRATE_SHIFT); - GPIO->P[1].MODEL = GPIO_P_MODEL_MODE0_DISABLED // NC - | GPIO_P_MODEL_MODE1_DISABLED // NC - | GPIO_P_MODEL_MODE2_DISABLED // NC - | GPIO_P_MODEL_MODE3_DISABLED // NU - | GPIO_P_MODEL_MODE4_DISABLED // NU - | GPIO_P_MODEL_MODE5_DISABLED // NU - | GPIO_P_MODEL_MODE6_DISABLED // NU - | GPIO_P_MODEL_MODE7_DISABLED; // MAIN_LFXTAL_P - GPIO->P[1].MODEH = GPIO_P_MODEH_MODE8_DISABLED // MAIN_LFXTAL_N - | GPIO_P_MODEH_MODE9_DISABLED // NC - | GPIO_P_MODEH_MODE10_DISABLED // NC - | GPIO_P_MODEH_MODE11_DISABLED // PDM_DAT0 - MIC_DATA - | GPIO_P_MODEH_MODE12_DISABLED // PDM_CLK - MIC_CLOCK - | GPIO_P_MODEH_MODE13_DISABLED // MAIN_HFXTAL_P - | GPIO_P_MODEH_MODE14_DISABLED // MAIN_HFXTAL_N - | GPIO_P_MODEH_MODE15_DISABLED; // NC - GPIO->P[1].DOUT = 0; - GPIO->P[1].OVTDIS = 0; - - // Port C - GPIO->P[2].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) - | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (7 << _GPIO_P_CTRL_SLEWRATE_SHIFT); - GPIO->P[2].MODEL = GPIO_P_MODEL_MODE0_DISABLED // NC - | GPIO_P_MODEL_MODE1_DISABLED // NC - | GPIO_P_MODEL_MODE2_DISABLED // NC - | GPIO_P_MODEL_MODE3_DISABLED // NC - | GPIO_P_MODEL_MODE4_DISABLED // NU - | GPIO_P_MODEL_MODE5_DISABLED // NU - | GPIO_P_MODEL_MODE6_DISABLED // NC - | GPIO_P_MODEL_MODE7_DISABLED; // NC - GPIO->P[2].MODEH = GPIO_P_MODEH_MODE8_DISABLED // NC - | GPIO_P_MODEH_MODE9_DISABLED // NC - | GPIO_P_MODEH_MODE10_DISABLED // NC - | GPIO_P_MODEH_MODE11_DISABLED // NC - | GPIO_P_MODEH_MODE12_DISABLED // NC - | GPIO_P_MODEH_MODE13_DISABLED // NC - | GPIO_P_MODEH_MODE14_DISABLED // NC - | GPIO_P_MODEH_MODE15_DISABLED; // NC - GPIO->P[2].DOUT = 0; - GPIO->P[2].OVTDIS = 0; - - // Port D - GPIO->P[3].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) - | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (6 << _GPIO_P_CTRL_SLEWRATE_SHIFT); - GPIO->P[3].MODEL = GPIO_P_MODEL_MODE0_DISABLED // NU - | GPIO_P_MODEL_MODE1_DISABLED // NU - | GPIO_P_MODEL_MODE2_DISABLED // NU - | GPIO_P_MODEL_MODE3_DISABLED // NU - | GPIO_P_MODEL_MODE4_DISABLED // NU - | GPIO_P_MODEL_MODE5_INPUT // GPIO - BTN0 - | GPIO_P_MODEL_MODE6_WIREDAND // LED1R - | GPIO_P_MODEL_MODE7_DISABLED; // NU - GPIO->P[3].MODEH = GPIO_P_MODEH_MODE8_INPUT // GPIO - BTN1 - | GPIO_P_MODEH_MODE9_DISABLED // NC - | GPIO_P_MODEH_MODE10_DISABLED // NC - | GPIO_P_MODEH_MODE11_DISABLED // NC - | GPIO_P_MODEH_MODE12_DISABLED // NC - | GPIO_P_MODEH_MODE13_DISABLED // NC - | GPIO_P_MODEH_MODE14_DISABLED // NC - | GPIO_P_MODEH_MODE15_DISABLED; // NC - GPIO->P[3].DOUT = 0; - GPIO->P[3].OVTDIS = 0; - - // Port E - GPIO->P[4].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) - | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (6 << _GPIO_P_CTRL_SLEWRATE_SHIFT); - GPIO->P[4].MODEL = GPIO_P_MODEL_MODE0_DISABLED // NC - | GPIO_P_MODEL_MODE1_DISABLED // NC - | GPIO_P_MODEL_MODE2_DISABLED // NC - | GPIO_P_MODEL_MODE3_DISABLED // NC - | GPIO_P_MODEL_MODE4_DISABLED // NU - | GPIO_P_MODEL_MODE5_DISABLED // NU - | GPIO_P_MODEL_MODE6_DISABLED // NU - | GPIO_P_MODEL_MODE7_DISABLED; // NU - GPIO->P[4].MODEH = GPIO_P_MODEH_MODE8_DISABLED // NU - | GPIO_P_MODEH_MODE9_DISABLED // NU - | GPIO_P_MODEH_MODE10_DISABLED // NU - | GPIO_P_MODEH_MODE11_DISABLED // NU - | GPIO_P_MODEH_MODE12_WIREDAND // LED1B - | GPIO_P_MODEH_MODE13_DISABLED // NU - | GPIO_P_MODEH_MODE14_DISABLED // NU - | GPIO_P_MODEH_MODE15_DISABLED; // NU - GPIO->P[4].DOUT = 0; - GPIO->P[4].OVTDIS = 0; - - // Port F - GPIO->P[5].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) - | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (6 << _GPIO_P_CTRL_SLEWRATE_SHIFT); - GPIO->P[5].MODEL = GPIO_P_MODEL_MODE0_PUSHPULL // SWCLK - | GPIO_P_MODEL_MODE1_PUSHPULL // SWDIO - | GPIO_P_MODEL_MODE2_PUSHPULL // SWO - | GPIO_P_MODEL_MODE3_DISABLED // NC - | GPIO_P_MODEL_MODE4_DISABLED // NC - | GPIO_P_MODEL_MODE5_DISABLED // NU - | GPIO_P_MODEL_MODE6_DISABLED // NC - | GPIO_P_MODEL_MODE7_DISABLED; // NC - GPIO->P[5].MODEH = GPIO_P_MODEH_MODE8_DISABLED // NC - | GPIO_P_MODEH_MODE9_DISABLED // NC - | GPIO_P_MODEH_MODE10_DISABLED // USB N - | GPIO_P_MODEH_MODE11_DISABLED // USB P - | GPIO_P_MODEH_MODE12_WIREDAND // LED1G - | GPIO_P_MODEH_MODE13_DISABLED // NC - | GPIO_P_MODEH_MODE14_DISABLED // NC - | GPIO_P_MODEH_MODE15_DISABLED; // NC - GPIO->P[5].DOUT = 0; - - GPIO->P[5].OVTDIS = 0; - - // Debugger Route - GPIO->ROUTEPEN &= ~(GPIO_ROUTEPEN_TDIPEN | GPIO_ROUTEPEN_TDOPEN); // Disable JTAG - GPIO->ROUTEPEN |= GPIO_ROUTEPEN_SWVPEN; // Enable SWO - GPIO->ROUTELOC0 = GPIO_ROUTELOC0_SWVLOC_LOC0; // SWO on PF2 - - // External interrupts - GPIO->EXTIPSELL = GPIO_EXTIPSELL_EXTIPSEL0_PORTE // NU - | GPIO_EXTIPSELL_EXTIPSEL1_PORTB // NU - | GPIO_EXTIPSELL_EXTIPSEL2_PORTB // NU - | GPIO_EXTIPSELL_EXTIPSEL3_PORTB // NU - | GPIO_EXTIPSELL_EXTIPSEL4_PORTA // NU - | GPIO_EXTIPSELL_EXTIPSEL5_PORTA // NU - | GPIO_EXTIPSELL_EXTIPSEL6_PORTC // NU - | GPIO_EXTIPSELL_EXTIPSEL7_PORTC; // NU - GPIO->EXTIPSELH = GPIO_EXTIPSELH_EXTIPSEL8_PORTA // NU - | GPIO_EXTIPSELH_EXTIPSEL9_PORTE // NU - | GPIO_EXTIPSELH_EXTIPSEL10_PORTF // NU - | GPIO_EXTIPSELH_EXTIPSEL11_PORTA // NU - | GPIO_EXTIPSELH_EXTIPSEL12_PORTA // NU - | GPIO_EXTIPSELH_EXTIPSEL13_PORTE // NU - | GPIO_EXTIPSELH_EXTIPSEL14_PORTF // NU - | GPIO_EXTIPSELH_EXTIPSEL15_PORTA; // NU - - GPIO->EXTIPINSELL = GPIO_EXTIPINSELL_EXTIPINSEL0_PIN3 // NU - | GPIO_EXTIPINSELL_EXTIPINSEL1_PIN1 // NU - | GPIO_EXTIPINSELL_EXTIPINSEL2_PIN2 // NU - | GPIO_EXTIPINSELL_EXTIPINSEL3_PIN3 // NU - | GPIO_EXTIPINSELL_EXTIPINSEL4_PIN6 // NU - | GPIO_EXTIPINSELL_EXTIPINSEL5_PIN7 // NU - | GPIO_EXTIPINSELL_EXTIPINSEL6_PIN4 // NU - | GPIO_EXTIPINSELL_EXTIPINSEL7_PIN7; // NU - GPIO->EXTIPINSELH = GPIO_EXTIPINSELH_EXTIPINSEL8_PIN8 // NU - | GPIO_EXTIPINSELH_EXTIPINSEL9_PIN9 // NU - | GPIO_EXTIPINSELH_EXTIPINSEL10_PIN11 // NU - | GPIO_EXTIPINSELH_EXTIPINSEL11_PIN8 // NU - | GPIO_EXTIPINSELH_EXTIPINSEL12_PIN13 // NU - | GPIO_EXTIPINSELH_EXTIPINSEL13_PIN15 // NU - | GPIO_EXTIPINSELH_EXTIPINSEL14_PIN12 // NU - | GPIO_EXTIPINSELH_EXTIPINSEL15_PIN12; // NU - -} - -/*--------------------------------------------------------------------*/ -/* Board Init */ -/*--------------------------------------------------------------------*/ - -void board_init(void) -{ - - emu_dcdc_init(1800.f, 50.f, 100.f, 0.f); // Init DC-DC converter (1.8 V, 50 mA active, 100 uA sleep, 0 mA reverse limit) - emu_init(0); - emu_reg_init(3300.f); // set output regulator to 3.3V - - cmu_hfxo_startup_calib(0x200, 0x145); // Config HFXO Startup for 1280 uA, 36 pF (18 pF + 2 pF CLOAD) - cmu_hfxo_steady_calib(0x009, 0x145); // Config HFXO Steady for 12 uA, 36 pF (18 pF + 2 pF CLOAD) - - cmu_init(); // Init Clock Management Unit - - cmu_ushfrco_calib(1, DEVINFO->USHFRCOCAL13); // Enable and calibrate USHFRCO for 48 MHz - cmu_auxhfrco_calib(1, DEVINFO->AUXHFRCOCAL11); // Enable and calibrate AUXHFRCO for 32 MHz - - CMU->USBCRCTRL = CMU_USBCRCTRL_USBCREN; // enable USB clock recovery - CMU->USBCTRL = CMU_USBCTRL_USBCLKSEL_USHFRCO | CMU_USBCTRL_USBCLKEN; // select USHFRCO as USB Phy clock source and enable it - - CMU->HFBUSCLKEN0 |= CMU_HFBUSCLKEN0_USB; // enable USB peripheral clock - - systick_init(); // Init system tick - - gpio_init(); // Init IOs - -} - -/*--------------------------------------------------------------------*/ -/* Board porting API */ -/*--------------------------------------------------------------------*/ - -void board_led_write(bool state) -{ - // Combine red and blue for pink Because it looks good :) - GPIO->P[LED_PORT].DOUT = (GPIO->P[LED_PORT].DOUT & ~((1 << LED_PIN_R) | (1 << LED_PIN_B))) | (state << LED_PIN_R) | (state << LED_PIN_B); -} - -uint32_t board_button_read(void) -{ - return !!(GPIO->P[BUTTON_PORT].DIN & (1 << BUTTON_PIN)); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -#ifdef USE_FULL_ASSERT -/** - * @brief Reports the name of the source file and the source line number - * where the assert_param error has occurred. - * @param file: pointer to the source file name - * @param line: assert_param error line source number - * @retval None - */ -void assert_failed(char *file, uint32_t line) -{ - /* USER CODE BEGIN 6 */ - /* User can add his own implementation to report the file name and line number, - tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - /* USER CODE END 6 */ -} -#endif /* USE_FULL_ASSERT */ diff --git a/tinyusb/hw/bsp/spresense/board.mk b/tinyusb/hw/bsp/spresense/board.mk deleted file mode 100755 index a46c42bd..00000000 --- a/tinyusb/hw/bsp/spresense/board.mk +++ /dev/null @@ -1,73 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/sony/cxd56/spresense-exported-sdk - -# Platforms are: Linux, Darwin, MSYS, CYGWIN -PLATFORM := $(firstword $(subst _, ,$(shell uname -s 2>/dev/null))) - -ifeq ($(PLATFORM),Darwin) - # macOS - MKSPK = $(TOP)/hw/mcu/sony/cxd56/mkspk/mkspk -else ifeq ($(PLATFORM),Linux) - # Linux - MKSPK = $(TOP)/hw/mcu/sony/cxd56/mkspk/mkspk -else - # Cygwin/MSYS2 - MKSPK = $(TOP)/hw/mcu/sony/cxd56/mkspk/mkspk.exe -endif - -SERIAL ?= /dev/ttyUSB0 - -CFLAGS += \ - -DCONFIG_HAVE_DOUBLE \ - -Dmain=spresense_main \ - -pipe \ - -std=gnu11 \ - -mcpu=cortex-m4 \ - -mthumb \ - -mfpu=fpv4-sp-d16 \ - -mfloat-abi=hard \ - -mabi=aapcs \ - -fno-builtin \ - -fno-strength-reduce \ - -fomit-frame-pointer \ - -Wno-error=undef \ - -Wno-error=cast-align \ - -Wno-error=unused-parameter \ - -DCFG_TUSB_MCU=OPT_MCU_CXD56 \ - -# lwip/src/core/raw.c:334:43: error: declaration of 'recv' shadows a global declaration -CFLAGS += -Wno-error=shadow - -SPRESENSE_SDK = $(TOP)/hw/mcu/sony/cxd56/spresense-exported-sdk - -SRC_C += src/portable/sony/cxd56/dcd_cxd56.c - -INC += \ - $(SPRESENSE_SDK)/nuttx/include \ - $(SPRESENSE_SDK)/nuttx/arch \ - $(SPRESENSE_SDK)/nuttx/arch/chip \ - $(SPRESENSE_SDK)/nuttx/arch/os \ - $(SPRESENSE_SDK)/sdk/include \ - -LIBS += \ - $(SPRESENSE_SDK)/nuttx/libs/libapps.a \ - $(SPRESENSE_SDK)/nuttx/libs/libnuttx.a \ - -LD_FILE = hw/mcu/sony/cxd56/spresense-exported-sdk/nuttx/scripts/ramconfig.ld - -LDFLAGS += \ - -Xlinker --entry=__start \ - -nostartfiles \ - -nodefaultlibs \ - -Wl,--gc-sections \ - -u spresense_main - -$(MKSPK): $(BUILD)/$(PROJECT).elf - $(MAKE) -C $(TOP)/hw/mcu/sony/cxd56/mkspk - -$(BUILD)/$(PROJECT).spk: $(MKSPK) - @echo CREATE $@ - @$(MKSPK) -c 2 $(BUILD)/$(PROJECT).elf nuttx $@ - -# flash -flash: $(BUILD)/$(PROJECT).spk - @$(TOP)/hw/mcu/sony/cxd56/tools/flash_writer.py -s -c $(SERIAL) -d -b 115200 -n $< diff --git a/tinyusb/hw/bsp/spresense/board_spresense.c b/tinyusb/hw/bsp/spresense/board_spresense.c deleted file mode 100755 index 256bccd1..00000000 --- a/tinyusb/hw/bsp/spresense/board_spresense.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright 2019 Sony Semiconductor Solutions Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include <sys/boardctl.h> -#include <nuttx/arch.h> -#include <arch/board/board.h> -#include <arch/chip/pin.h> - -#include "bsp/board.h" - -/*------------------------------------------------------------------*/ -/* MACRO TYPEDEF CONSTANT ENUM - *------------------------------------------------------------------*/ -#define LED_PIN PIN_I2S1_BCK - -#define BUTTON_PIN PIN_HIF_IRQ_OUT - -// Initialize on-board peripherals : led, button, uart and USB -void board_init(void) -{ - boardctl(BOARDIOC_INIT, 0); - - board_gpio_write(PIN_I2S1_BCK, -1); - board_gpio_config(PIN_I2S1_BCK, 0, false, true, PIN_FLOAT); - - board_gpio_write(PIN_HIF_IRQ_OUT, -1); - board_gpio_config(PIN_HIF_IRQ_OUT, 0, true, true, PIN_FLOAT); -}; - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -// Turn LED on or off -void board_led_write(bool state) -{ - board_gpio_write(LED_PIN, state); -} - -// Get the current state of button -// a '1' means active (pressed), a '0' means inactive. -uint32_t board_button_read(void) -{ - if (board_gpio_read(BUTTON_PIN)) - { - return 0; - } - - return 1; -} - -// Get characters from UART -int board_uart_read(uint8_t *buf, int len) -{ - int r = read(0, buf, len); - - return r; -} - -// Send characters to UART -int board_uart_write(void const *buf, int len) -{ - int r = write(1, buf, len); - - return r; -} - -// Get current milliseconds -uint32_t board_millis(void) -{ - struct timespec tp; - - /* Wait until RTC is available */ - while (g_rtc_enabled == false); - - if (clock_gettime(CLOCK_MONOTONIC, &tp)) - { - return 0; - } - - return (((uint64_t)tp.tv_sec) * 1000 + tp.tv_nsec / 1000000); -} diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h b/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h deleted file mode 100755 index 7c527e2c..00000000 --- a/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PORT GPIOA -#define LED_PIN GPIO_PIN_5 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_DEV USART2 -#define UART_CLK_EN __HAL_RCC_USART2_CLK_ENABLE -#define UART_GPIO_PORT GPIOA -#define UART_GPIO_AF GPIO_AF1_USART2 -#define UART_TX_PIN GPIO_PIN_2 -#define UART_RX_PIN GPIO_PIN_3 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_stm32f0_clock_init(void) -{ - /* Configure the system clock to 48 MHz */ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; - - /* Enable HSE Oscillator and activate PLL with 8 MHz HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; - RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1); - - - PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; - PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL; - HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) ; -} - -static inline void board_vbus_sense_init(void) -{ -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk b/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk deleted file mode 100755 index 9e636cd7..00000000 --- a/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -DSTM32F070xB - -LD_FILE = $(BOARD_PATH)/stm32F070rbtx_flash.ld - -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f070xb.s - -# For flash-jlink target -JLINK_DEVICE = stm32f070rb - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld b/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld deleted file mode 100755 index 59e18f37..00000000 --- a/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld +++ /dev/null @@ -1,200 +0,0 @@ -/* -****************************************************************************** -** -** File : LinkerScript.ld -** -** Author : Auto-generated by STM32CubeIDE -** -** Abstract : Linker script for STM32F070RBTx Device from STM32F0 series -** 128Kbytes FLASH -** 16Kbytes RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** Distribution: The file is distributed as is without any warranty -** of any kind. -** -***************************************************************************** -** @attention -** -** <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2> -** -** Redistribution and use in source and binary forms, with or without modification, -** are permitted provided that the following conditions are met: -** 1. Redistributions of source code must retain the above copyright notice, -** this list of conditions and the following disclaimer. -** 2. Redistributions in binary form must reproduce the above copyright notice, -** this list of conditions and the following disclaimer in the documentation -** and/or other materials provided with the distribution. -** 3. Neither the name of STMicroelectronics nor the names of its contributors -** may be used to endorse or promote products derived from this software -** without specific prior written permission. -** -** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20004000; /* end of "RAM" Ram type memory */ - -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Memories definition */ -MEMORY -{ - RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 16K - FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 128K -} - -/* Sections */ -SECTIONS -{ - /* The startup code into "FLASH" Rom type memory */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data into "FLASH" Rom type memory */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data into "FLASH" Rom type memory */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { - . = ALIGN(4); - *(.ARM.extab* .gnu.linkonce.armextab.*) - . = ALIGN(4); - } >FLASH - - .ARM : { - . = ALIGN(4); - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - . = ALIGN(4); - } >FLASH - - .preinit_array : - { - . = ALIGN(4); - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - . = ALIGN(4); - } >FLASH - - .init_array : - { - . = ALIGN(4); - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - . = ALIGN(4); - } >FLASH - - .fini_array : - { - . = ALIGN(4); - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - . = ALIGN(4); - } >FLASH - - /* Used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections into "RAM" Ram type memory */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - - } >RAM AT> FLASH - - /* Uninitialized data section into "RAM" Ram type memory */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - /* Remove information from the compiler libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld b/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld deleted file mode 100755 index 8d31f6a0..00000000 --- a/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld +++ /dev/null @@ -1,169 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F072RBTx Device with -** 128KByte FLASH, 16KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20004000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 128K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 16K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/board.h b/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/board.h deleted file mode 100755 index 0b1824b8..00000000 --- a/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/board.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PORT GPIOC -#define LED_PIN GPIO_PIN_6 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - -// UART -#define UART_DEV USART1 -#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE -#define UART_GPIO_PORT GPIOA -#define UART_GPIO_AF GPIO_AF1_USART1 -#define UART_TX_PIN GPIO_PIN_9 -#define UART_RX_PIN GPIO_PIN_10 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_stm32f0_clock_init(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* Select HSI48 Oscillator as PLL source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48; - RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI48; - RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV2; - RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL2; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Select PLL as system clock source and configure the HCLK and PCLK1 clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1); -} - -static inline void board_vbus_sense_init(void) -{ -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/board.mk b/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/board.mk deleted file mode 100755 index 2ef0ee63..00000000 --- a/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -DSTM32F072xB - -LD_FILE = $(BOARD_PATH)/STM32F072RBTx_FLASH.ld - -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f072xb.s - -# For flash-jlink target -JLINK_DEVICE = stm32f072rb - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/STM32F072VBTx_FLASH.ld b/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/STM32F072VBTx_FLASH.ld deleted file mode 100755 index 581613a5..00000000 --- a/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/STM32F072VBTx_FLASH.ld +++ /dev/null @@ -1,177 +0,0 @@ -/** - ****************************************************************************** - * @file LinkerScript.ld - * @author Auto-generated by STM32CubeIDE - * Abstract : Linker script for STM32072B-EVAL Board embedding STM32F072VBTx Device from stm32f0 series - * 128Kbytes FLASH - * 16Kbytes RAM - * - * Set heap size, stack size and stack location according - * to application requirements. - * - * Set memory bank area and size if external memory is used - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright (c) 2020 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ - -_Min_Heap_Size = 0x200 ; /* required amount of heap */ -_Min_Stack_Size = 0x400 ; /* required amount of stack */ - -/* Memories definition */ -MEMORY -{ - RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 16K - FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 128K -} - -/* Sections */ -SECTIONS -{ - /* The startup code into "FLASH" Rom type memory */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data into "FLASH" Rom type memory */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data into "FLASH" Rom type memory */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { - . = ALIGN(4); - *(.ARM.extab* .gnu.linkonce.armextab.*) - . = ALIGN(4); - } >FLASH - - .ARM : { - . = ALIGN(4); - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - . = ALIGN(4); - } >FLASH - - .preinit_array : - { - . = ALIGN(4); - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - . = ALIGN(4); - } >FLASH - - .init_array : - { - . = ALIGN(4); - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - . = ALIGN(4); - } >FLASH - - .fini_array : - { - . = ALIGN(4); - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - . = ALIGN(4); - } >FLASH - - /* Used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections into "RAM" Ram type memory */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - *(.RamFunc) /* .RamFunc sections */ - *(.RamFunc*) /* .RamFunc* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - - } >RAM AT> FLASH - - /* Uninitialized data section into "RAM" Ram type memory */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss section */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - /* Remove information from the compiler libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.h b/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.h deleted file mode 100755 index 8869d5dc..00000000 --- a/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PORT GPIOD -#define LED_PIN GPIO_PIN_8 // LED1, GREEN -// #define LED_PIN GPIO_PIN_9 // LED2, ORANGE -// #define LED_PIN GPIO_PIN_10 // LED3, RED -// #define LED_PIN GPIO_PIN_11 // LED4, BLUE -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 // JOY_SEL -#define BUTTON_STATE_ACTIVE 1 - -// UART -#define UART_DEV USART2 -#define UART_CLK_EN __HAL_RCC_USART2_CLK_ENABLE -#define UART_GPIO_PORT GPIOD -#define UART_GPIO_AF GPIO_AF0_USART2 -#define UART_TX_PIN GPIO_PIN_5 -#define UART_RX_PIN GPIO_PIN_6 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_stm32f0_clock_init(void) -{ - RCC_OscInitTypeDef RCC_OscInitStruct = {0}; - RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; - - /** Initializes the RCC Oscillators according to the specified parameters - * in the RCC_OscInitTypeDef structure. - */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48; - RCC_OscInitStruct.HSEState = RCC_HSE_OFF; - RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; - RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; - RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; - - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /** Initializes the CPU, AHB and APB buses clocks - */ - RCC_ClkInitStruct.ClockType = - RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1); - - PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB | RCC_PERIPHCLK_USART2; - PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1; - PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; - - HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit); -} - -static inline void board_vbus_sense_init(void) -{ -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.mk b/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.mk deleted file mode 100755 index f7f8c84e..00000000 --- a/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -DSTM32F072xB -DLSI_VALUE=40000 - -LD_FILE = $(BOARD_PATH)/STM32F072VBTx_FLASH.ld - -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f072xb.s - -# For flash-jlink target -JLINK_DEVICE = stm32f072vb - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f0/family.c b/tinyusb/hw/bsp/stm32f0/family.c deleted file mode 100755 index 853bb9d6..00000000 --- a/tinyusb/hw/bsp/stm32f0/family.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "stm32f0xx_hal.h" -#include "bsp/board.h" -#include "board.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -UART_HandleTypeDef UartHandle; - -void board_init(void) -{ - board_stm32f0_clock_init(); - - // Enable All GPIOs clocks - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOB_CLK_ENABLE(); - __HAL_RCC_GPIOC_CLK_ENABLE(); - __HAL_RCC_GPIOD_CLK_ENABLE(); - __HAL_RCC_GPIOF_CLK_ENABLE(); - - // Enable UART Clock - UART_CLK_EN(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - - // LED - GPIO_InitTypeDef GPIO_InitStruct; - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_PULLDOWN; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - // Uart - GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = UART_GPIO_AF; - HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); - - UartHandle.Instance = UART_DEV; - UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; - UartHandle.Init.WordLength = UART_WORDLENGTH_8B; - UartHandle.Init.StopBits = UART_STOPBITS_1; - UartHandle.Init.Parity = UART_PARITY_NONE; - UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; - UartHandle.Init.Mode = UART_MODE_TX_RX; - UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; - HAL_UART_Init(&UartHandle); - - // USB Pins - // Configure USB DM and DP pins. This is optional, and maintained only for user guidance. - GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // USB Clock enable - __HAL_RCC_USB_CLK_ENABLE(); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff); - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - asm("bkpt"); -} - -#ifdef USE_FULL_ASSERT -/** - * @brief Reports the name of the source file and the source line number - * where the assert_param error has occurred. - * @param file: pointer to the source file name - * @param line: assert_param error line source number - * @retval None - */ -void assert_failed(uint8_t* file, uint32_t line) -{ - (void) file; (void) line; - /* USER CODE BEGIN 6 */ - /* User can add his own implementation to report the file name and line number, - tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - /* USER CODE END 6 */ -} -#endif /* USE_FULL_ASSERT */ - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/tinyusb/hw/bsp/stm32f0/family.mk b/tinyusb/hw/bsp/stm32f0/family.mk deleted file mode 100755 index 08cbf562..00000000 --- a/tinyusb/hw/bsp/stm32f0/family.mk +++ /dev/null @@ -1,40 +0,0 @@ -UF2_FAMILY_ID = 0x647824b6 -ST_FAMILY = f0 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -include $(TOP)/$(BOARD_PATH)/board.mk - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0 \ - -mfloat-abi=soft \ - -nostdlib -nostartfiles \ - -DCFG_EXAMPLE_MSC_READONLY \ - -DCFG_TUSB_MCU=OPT_MCU_STM32F0 - -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align - -SRC_C += \ - src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ - $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM0 diff --git a/tinyusb/hw/bsp/stm32f0/stm32f0xx_hal_conf.h b/tinyusb/hw/bsp/stm32f0/stm32f0xx_hal_conf.h deleted file mode 100755 index cfa66b36..00000000 --- a/tinyusb/hw/bsp/stm32f0/stm32f0xx_hal_conf.h +++ /dev/null @@ -1,321 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F0xx_HAL_CONF_H -#define __STM32F0xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/*#define HAL_ADC_MODULE_ENABLED */ -/*#define HAL_CAN_MODULE_ENABLED */ -/*#define HAL_CEC_MODULE_ENABLED */ -/*#define HAL_COMP_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/*#define HAL_CRC_MODULE_ENABLED */ -/*#define HAL_DAC_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -#define HAL_GPIO_MODULE_ENABLED -/*#define HAL_EXTI_MODULE_ENABLED */ -/*#define HAL_I2C_MODULE_ENABLED */ -/*#define HAL_I2S_MODULE_ENABLED */ -/*#define HAL_IRDA_MODULE_ENABLED */ -/*#define HAL_IWDG_MODULE_ENABLED */ -#define HAL_PCD_MODULE_ENABLED -#define HAL_PWR_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED -/*#define HAL_RTC_MODULE_ENABLED */ -/*#define HAL_SMARTCARD_MODULE_ENABLED */ -/*#define HAL_SMBUS_MODULE_ENABLED */ -/*#define HAL_SPI_MODULE_ENABLED */ -/*#define HAL_TIM_MODULE_ENABLED */ -/*#define HAL_TSC_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/*#define HAL_USART_MODULE_ENABLED */ -/*#define HAL_WWDG_MODULE_ENABLED */ - -/* ######################### Oscillator Values adaptation ################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -/** - * @brief In the following line adjust the External High Speed oscillator (HSE) Startup - * Timeout value - */ -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup - * Timeout value - */ -#if !defined (HSI_STARTUP_TIMEOUT) - #define HSI_STARTUP_TIMEOUT 5000U /*!< Time out for HSI start up */ -#endif /* HSI_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator for ADC (HSI14) value. - */ -#if !defined (HSI14_VALUE) - #define HSI14_VALUE 14000000U /*!< Value of the Internal High Speed oscillator for ADC in Hz. - The real value may vary depending on the variations - in voltage and temperature. */ -#endif /* HSI14_VALUE */ - -/** - * @brief Internal High Speed oscillator for USB (HSI48) value. - */ -#if !defined (HSI48_VALUE) - #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB in Hz. - The real value may vary depending on the variations - in voltage and temperature. */ -#endif /* HSI48_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE 32000U -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -/** - * @brief Time out for LSE start up value in ms. - */ -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE 3300U /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default) */ - /* Warning: Must be set to higher priority for HAL_Delay() */ - /* and HAL_GetTick() usage under interrupt context */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 0U -#define DATA_CACHE_ENABLE 0U -#define USE_SPI_CRC 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ - #define USE_FULL_ASSERT 1 - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f0xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f0xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f0xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f0xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f0xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f0xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f0xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f0xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_COMP_MODULE_ENABLED - #include "stm32f0xx_hal_comp.h" -#endif /* HAL_COMP_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f0xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f0xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f0xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f0xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f0xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f0xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f0xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f0xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f0xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f0xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f0xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f0xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f0xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f0xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_TSC_MODULE_ENABLED - #include "stm32f0xx_hal_tsc.h" -#endif /* HAL_TSC_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f0xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f0xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f0xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F0xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/tinyusb/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld b/tinyusb/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld deleted file mode 100755 index ca180490..00000000 --- a/tinyusb/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld +++ /dev/null @@ -1,167 +0,0 @@ -/* -***************************************************************************** -** -** File : STM32F103XB_FLASH.ld -** -** Abstract : Linker script for STM32F103xB Device with -** 128KByte FLASH, 20KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20004FFF; /* end of RAM */ - -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 20K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/tinyusb/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h b/tinyusb/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h deleted file mode 100755 index 57a607ed..00000000 --- a/tinyusb/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PORT GPIOC -#define LED_PIN GPIO_PIN_13 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - -// UART -//#define UART_DEV USART1 -//#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE -//#define UART_GPIO_PORT GPIOA -//#define UART_GPIO_AF GPIO_AF1_USART1 -//#define UART_TX_PIN GPIO_PIN_9 -//#define UART_RX_PIN GPIO_PIN_10 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_stm32f1_clock_init(void) -{ - RCC_ClkInitTypeDef clkinitstruct = {0}; - RCC_OscInitTypeDef oscinitstruct = {0}; - RCC_PeriphCLKInitTypeDef rccperiphclkinit = {0}; - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - oscinitstruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - oscinitstruct.HSEState = RCC_HSE_ON; - oscinitstruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; - oscinitstruct.PLL.PLLMUL = RCC_PLL_MUL9; - oscinitstruct.PLL.PLLState = RCC_PLL_ON; - oscinitstruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - HAL_RCC_OscConfig(&oscinitstruct); - - /* USB clock selection */ - rccperiphclkinit.PeriphClockSelection = RCC_PERIPHCLK_USB; - rccperiphclkinit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; - HAL_RCCEx_PeriphCLKConfig(&rccperiphclkinit); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ - clkinitstruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - clkinitstruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - clkinitstruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - clkinitstruct.APB1CLKDivider = RCC_HCLK_DIV2; - clkinitstruct.APB2CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&clkinitstruct, FLASH_LATENCY_2); -} - -static inline void board_vbus_sense_init(void) -{ -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.mk b/tinyusb/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.mk deleted file mode 100755 index 9c690ca7..00000000 --- a/tinyusb/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -DSTM32F103xB -DHSE_VALUE=8000000U - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/STM32F103X8_FLASH.ld -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f103xb.s - -# For flash-jlink target -JLINK_DEVICE = stm32f103c8 - -# flash target ROM bootloader -flash: flash-dfu-util diff --git a/tinyusb/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld b/tinyusb/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld deleted file mode 100755 index da40d1eb..00000000 --- a/tinyusb/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld +++ /dev/null @@ -1,167 +0,0 @@ -/* -***************************************************************************** -** -** File : STM32F103XB_FLASH.ld -** -** Abstract : Linker script for STM32F103xB Device with -** 128KByte FLASH, 20KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20004FFF; /* end of RAM */ - -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 48K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/tinyusb/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h b/tinyusb/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h deleted file mode 100755 index bedce7f1..00000000 --- a/tinyusb/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PORT GPIOA -#define LED_PIN GPIO_PIN_8 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - -// UART -//#define UART_DEV USART1 -//#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE -//#define UART_GPIO_PORT GPIOA -//#define UART_GPIO_AF GPIO_AF1_USART1 -//#define UART_TX_PIN GPIO_PIN_9 -//#define UART_RX_PIN GPIO_PIN_10 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_stm32f1_clock_init(void) -{ - RCC_ClkInitTypeDef clkinitstruct = {0}; - RCC_OscInitTypeDef oscinitstruct = {0}; - RCC_PeriphCLKInitTypeDef rccperiphclkinit = {0}; - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - oscinitstruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - oscinitstruct.HSEState = RCC_HSE_ON; - oscinitstruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; - oscinitstruct.PLL.PLLMUL = RCC_PLL_MUL9; - oscinitstruct.PLL.PLLState = RCC_PLL_ON; - oscinitstruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - HAL_RCC_OscConfig(&oscinitstruct); - - /* USB clock selection */ - rccperiphclkinit.PeriphClockSelection = RCC_PERIPHCLK_USB; - rccperiphclkinit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; - HAL_RCCEx_PeriphCLKConfig(&rccperiphclkinit); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ - clkinitstruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - clkinitstruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - clkinitstruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - clkinitstruct.APB1CLKDivider = RCC_HCLK_DIV2; - clkinitstruct.APB2CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&clkinitstruct, FLASH_LATENCY_2); -} - -static inline void board_vbus_sense_init(void) -{ -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.mk b/tinyusb/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.mk deleted file mode 100755 index eeda8708..00000000 --- a/tinyusb/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -DSTM32F103xB -DHSE_VALUE=8000000U - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/STM32F103XC_FLASH.ld -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f103xb.s - -# For flash-jlink target -JLINK_DEVICE = stm32f103rc - -# flash target ROM bootloader -flash: flash-jlink diff --git a/tinyusb/hw/bsp/stm32f1/family.c b/tinyusb/hw/bsp/stm32f1/family.c deleted file mode 100755 index 8fcf9ebd..00000000 --- a/tinyusb/hw/bsp/stm32f1/family.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "stm32f1xx_hal.h" -#include "bsp/board.h" -#include "board.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_HP_IRQHandler(void) -{ - tud_int_handler(0); -} - -void USB_LP_IRQHandler(void) -{ - tud_int_handler(0); -} - -void USBWakeUp_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -void board_init(void) -{ - board_stm32f1_clock_init(); - - // Enable All GPIOs clocks - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOB_CLK_ENABLE(); - __HAL_RCC_GPIOC_CLK_ENABLE(); - __HAL_RCC_GPIOD_CLK_ENABLE(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_HP_CAN1_TX_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USBWakeUp_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - - // LED - GPIO_InitTypeDef GPIO_InitStruct; - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = LED_STATE_ON ? GPIO_PULLDOWN : GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN : GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - // USB Pins - // Configure USB DM and DP pins. - GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // USB Clock enable - __HAL_RCC_USB_CLK_ENABLE(); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - asm("bkpt"); -} - -#ifdef USE_FULL_ASSERT -/** - * @brief Reports the name of the source file and the source line number - * where the assert_param error has occurred. - * @param file: pointer to the source file name - * @param line: assert_param error line source number - * @retval None - */ -void assert_failed(char *file, uint32_t line) -{ - /* USER CODE BEGIN 6 */ - /* User can add his own implementation to report the file name and line number, - tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - /* USER CODE END 6 */ -} -#endif /* USE_FULL_ASSERT */ - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/tinyusb/hw/bsp/stm32f1/family.mk b/tinyusb/hw/bsp/stm32f1/family.mk deleted file mode 100755 index 3fb2e6e7..00000000 --- a/tinyusb/hw/bsp/stm32f1/family.mk +++ /dev/null @@ -1,45 +0,0 @@ -ST_FAMILY = f1 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -include $(TOP)/$(BOARD_PATH)/board.mk - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m3 \ - -mfloat-abi=soft \ - -nostdlib -nostartfiles \ - -DCFG_TUSB_MCU=OPT_MCU_STM32F1 - -# mcu driver cause following warnings -#CFLAGS += -Wno-error=unused-parameter - -# All source paths should be relative to the top level. -SRC_C += \ - src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ - $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM3 - -# For flash-jlink target -JLINK_DEVICE = stm32f103c8 - -# flash target ROM bootloader -flash-dfu-util: $(BUILD)/$(PROJECT).bin - dfu-util -R -a 0 --dfuse-address 0x08000000 -D $< diff --git a/tinyusb/hw/bsp/stm32f1/stm32f1xx_hal_conf.h b/tinyusb/hw/bsp/stm32f1/stm32f1xx_hal_conf.h deleted file mode 100755 index a4a3f308..00000000 --- a/tinyusb/hw/bsp/stm32f1/stm32f1xx_hal_conf.h +++ /dev/null @@ -1,379 +0,0 @@ -/** - ****************************************************************************** - * @file USB_Device/HID_Standalone/Inc/stm32f1xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration template file. - * This file should be copied to the application folder and renamed - * to stm32f1xx_hal_conf.h. - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_CONF_H -#define __STM32F1xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -#define HAL_EXTI_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -#define HAL_PCD_MODULE_ENABLED -#define HAL_PWR_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ - -/* ########################## Oscillator Values adaptation ####################*/ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) -#if defined(USE_STM3210C_EVAL) - #define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */ -#else - #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ -#endif -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz */ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ - -/** - * @brief External Low Speed oscillator (LSE) value. - * This value is used by the UART, RTC HAL module to compute the system frequency - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE 3300U /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY 0x00U /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB 8U /* 8 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848 PHY Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY 0x000000FFU -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY 0x00000FFFU - -#define PHY_READ_TO 0x0000FFFFU -#define PHY_WRITE_TO 0x0000FFFFU - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ -#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ -#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - -#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ -#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ - -#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ -#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ - -#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ -#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f1xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f1xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f1xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f1xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f1xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "Legacy/stm32f1xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f1xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f1xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f1xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f1xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f1xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f1xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f1xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f1xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f1xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f1xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f1xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f1xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f1xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f1xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f1xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f1xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f1xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f1xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f1xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f1xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f1xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f1xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f1xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld b/tinyusb/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld deleted file mode 100755 index 29e387f2..00000000 --- a/tinyusb/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld +++ /dev/null @@ -1,169 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F207IGHx Device with -** 1024KByte FLASH, 128KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20020000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/tinyusb/hw/bsp/stm32f207nucleo/board.mk b/tinyusb/hw/bsp/stm32f207nucleo/board.mk deleted file mode 100755 index 2b979f3d..00000000 --- a/tinyusb/hw/bsp/stm32f207nucleo/board.mk +++ /dev/null @@ -1,48 +0,0 @@ -ST_FAMILY = f2 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m3 \ - -mfloat-abi=soft \ - -nostdlib -nostartfiles \ - -DSTM32F207xx \ - -DCFG_TUSB_MCU=OPT_MCU_STM32F2 - -# mcu driver cause following warnings -CFLAGS += -Wno-error=sign-compare - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/STM32F207ZGTx_FLASH.ld - -SRC_C += \ - src/portable/st/synopsys/dcd_synopsys.c \ - $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c - -SRC_S += \ - $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f207xx.s - -INC += \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc \ - $(TOP)/hw/bsp/$(BOARD) - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM3 - -# For flash-jlink target -JLINK_DEVICE = stm32f207zg - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f207nucleo/stm32f207nucleo.c b/tinyusb/hw/bsp/stm32f207nucleo/stm32f207nucleo.c deleted file mode 100755 index 619c90d6..00000000 --- a/tinyusb/hw/bsp/stm32f207nucleo/stm32f207nucleo.c +++ /dev/null @@ -1,213 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../board.h" - -#include "stm32f2xx_hal.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void OTG_FS_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_14 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - - -// enable all LED, Button, Uart, USB clock -static void all_rcc_clk_enable(void) -{ - __HAL_RCC_GPIOA_CLK_ENABLE(); // USB D+, D- - __HAL_RCC_GPIOB_CLK_ENABLE(); // LED - __HAL_RCC_GPIOC_CLK_ENABLE(); // Button -} - -/** - * @brief System Clock Configuration - * The system Clock is configured as follow : - * System Clock source = PLL (HSE) - * SYSCLK(Hz) = 120000000 - * HCLK(Hz) = 120000000 - * AHB Prescaler = 1 - * APB1 Prescaler = 4 - * APB2 Prescaler = 2 - * HSE Frequency(Hz) = 8000000 - * PLL_M = HSE_VALUE/1000000 - * PLL_N = 240 - * PLL_P = 2 - * PLL_Q = 5 - * VDD(V) = 3.3 - * Flash Latency(WS) = 3 - * @param None - * @retval None - */ -void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 240; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = 5; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3); -} - -void board_init(void) -{ - SystemClock_Config(); - - #if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - #endif - - - all_rcc_clk_enable(); - - GPIO_InitTypeDef GPIO_InitStruct; - - // LED - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - board_led_write(false); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_PULLDOWN; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - /* Configure DM DP Pins */ - GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Configure VBUS Pin */ - GPIO_InitStruct.Pin = GPIO_PIN_9; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Configure ID pin */ - GPIO_InitStruct.Pin = GPIO_PIN_10; - GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Enable USB FS Clocks */ - __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); - - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - asm("bkpt"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/tinyusb/hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h b/tinyusb/hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h deleted file mode 100755 index 2ab46b26..00000000 --- a/tinyusb/hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h +++ /dev/null @@ -1,407 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f2xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F2xx_HAL_CONF_H -#define __STM32F2xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -/* #define HAL_DMA_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_EXTI_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -/* #define HAL_UART_MODULE_ENABLED */ -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -#define HAL_PCD_MODULE_ENABLED -/* #define HAL_HCD_MODULE_ENABLED */ - - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature.*/ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the Internal oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE 3300U /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY 0x0FU /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB 5U /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB 5U /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* LAN8742A PHY Address*/ -#define LAN8742A_PHY_ADDRESS 0x00U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY 0x000000FFU -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY 0x00000FFFU - -#define PHY_READ_TO 0x0000FFFFU -#define PHY_WRITE_TO 0x0000FFFFU - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ - -#define PHY_SPEED_STATUS ((uint16_t)0x0004) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0010) /*!< PHY Duplex mask */ - - -#define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ -#define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f2xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f2xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f2xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f2xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f2xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f2xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f2xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f2xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f2xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f2xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f2xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f2xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f2xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f2xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f2xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f2xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f2xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f2xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f2xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f2xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f2xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f2xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f2xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f2xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f2xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f2xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f2xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f2xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f2xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f2xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f2xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f2xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f2xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f2xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F2xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld b/tinyusb/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld deleted file mode 100755 index ca9046d2..00000000 --- a/tinyusb/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld +++ /dev/null @@ -1,189 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F303VCTx Device with -** 256KByte FLASH, 40KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x2000a000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x800;; /* required amount of heap */ -_Min_Stack_Size = 0x800;; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 256K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 40K -CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 8K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - _siccmram = LOADADDR(.ccmram); - - /* CCM-RAM section - * - * IMPORTANT NOTE! - * If initialized variables will be placed in this section, - * the startup code needs to be modified to copy the init-values. - */ - .ccmram : - { - . = ALIGN(4); - _sccmram = .; /* create a global symbol at ccmram start */ - *(.ccmram) - *(.ccmram*) - - . = ALIGN(4); - _eccmram = .; /* create a global symbol at ccmram end */ - } >CCMRAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/tinyusb/hw/bsp/stm32f303disco/board.mk b/tinyusb/hw/bsp/stm32f303disco/board.mk deleted file mode 100755 index 9dd27a85..00000000 --- a/tinyusb/hw/bsp/stm32f303disco/board.mk +++ /dev/null @@ -1,49 +0,0 @@ -ST_FAMILY = f3 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib -nostartfiles \ - -DSTM32F303xC \ - -DCFG_TUSB_MCU=OPT_MCU_STM32F3 - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/STM32F303VCTx_FLASH.ld - -SRC_C += \ - src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ - $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c - -SRC_S += \ - $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f303xc.s - -INC += \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc \ - $(TOP)/hw/bsp/$(BOARD) - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = stm32f303vc - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f303disco/stm32f303disco.c b/tinyusb/hw/bsp/stm32f303disco/stm32f303disco.c deleted file mode 100755 index 33552bc0..00000000 --- a/tinyusb/hw/bsp/stm32f303disco/stm32f303disco.c +++ /dev/null @@ -1,215 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../board.h" -#include "stm32f3xx_hal.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ - -// USB defaults to using interrupts 19, 20 and 42, however, this BSP sets the -// SYSCFG_CFGR1.USB_IT_RMP bit remapping interrupts to 74, 75 and 76. - -// FIXME: Do all three need to be handled, or just the LP one? -// USB high-priority interrupt (Channel 74): Triggered only by a correct -// transfer event for isochronous and double-buffer bulk transfer to reach -// the highest possible transfer rate. -void USB_HP_IRQHandler(void) -{ - tud_int_handler(0); -} - -// USB low-priority interrupt (Channel 75): Triggered by all USB events -// (Correct transfer, USB reset, etc.). The firmware has to check the -// interrupt source before serving the interrupt. -void USB_LP_IRQHandler(void) -{ - tud_int_handler(0); -} - -// USB wakeup interrupt (Channel 76): Triggered by the wakeup event from the USB -// Suspend mode. -void USBWakeUp_RMP_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -#define LED_PORT GPIOE -#define LED_PIN GPIO_PIN_9 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - - -/** - * @brief System Clock Configuration - * The system Clock is configured as follow : - * System Clock source = PLL (HSE) - * SYSCLK(Hz) = 72000000 - * HCLK(Hz) = 72000000 - * AHB Prescaler = 1 - * APB1 Prescaler = 2 - * APB2 Prescaler = 1 - * HSE Frequency(Hz) = 8000000 - * HSE PREDIV = 1 - * PLLMUL = RCC_PLL_MUL9 (9) - * Flash Latency(WS) = 2 - * @param None - * @retval None - */ -static void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit; - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Configures the USB clock */ - HAL_RCCEx_GetPeriphCLKConfig(&RCC_PeriphClkInit); - RCC_PeriphClkInit.USBClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; - HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); - - /* Enable Power Clock */ - __HAL_RCC_PWR_CLK_ENABLE(); -} - -void board_init(void) -{ - SystemClock_Config(); - - #if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - #endif - - // Remap the USB interrupts - __HAL_RCC_SYSCFG_CLK_ENABLE(); - __HAL_REMAPINTERRUPT_USB_ENABLE(); - - // LED - __HAL_RCC_GPIOE_CLK_ENABLE(); - GPIO_InitTypeDef GPIO_InitStruct; - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - // Button - __HAL_RCC_GPIOA_CLK_ENABLE(); - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_PULLDOWN; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - /* Configure USB DM and DP pins */ - __HAL_RCC_GPIOA_CLK_ENABLE(); - GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF14_USB; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // Enable USB clock - __HAL_RCC_USB_CLK_ENABLE(); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - asm("bkpt"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/tinyusb/hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h b/tinyusb/hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h deleted file mode 100755 index 0abcbb01..00000000 --- a/tinyusb/hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h +++ /dev/null @@ -1,357 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f3xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F3xx_HAL_CONF_H -#define __STM32F3xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_COMP_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_HRTIM_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_OPAMP_MODULE_ENABLED */ -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_PWR_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SDADC_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -/* #define HAL_TSC_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -/** - * @brief In the following line adjust the External High Speed oscillator (HSE) Startup - * Timeout value - */ -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE (8000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup - * Timeout value - */ -#if !defined (HSI_STARTUP_TIMEOUT) - #define HSI_STARTUP_TIMEOUT (5000U) /*!< Time out for HSI start up */ -#endif /* HSI_STARTUP_TIMEOUT */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (40000U) -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -/** - * @brief Time out for LSE start up value in ms. - */ -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - * - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal) - * - External clock not generated on EVAL 373 - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE (8000000U) /*!< Value of the External oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default) */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 0U -#define DATA_CACHE_ENABLE 0U -#define USE_SPI_CRC 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SDADC_REGISTER_CALLBACKS 0U /* SDADC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ -#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* OPAMP register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/*#define USE_FULL_ASSERT 1U*/ - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f3xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f3xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f3xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f3xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f3xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f3xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f3xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f3xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f3xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_COMP_MODULE_ENABLED - #include "stm32f3xx_hal_comp.h" -#endif /* HAL_COMP_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f3xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f3xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f3xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f3xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f3xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f3xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f3xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_HRTIM_MODULE_ENABLED - #include "stm32f3xx_hal_hrtim.h" -#endif /* HAL_HRTIM_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f3xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f3xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f3xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f3xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_OPAMP_MODULE_ENABLED - #include "stm32f3xx_hal_opamp.h" -#endif /* HAL_OPAMP_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f3xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f3xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f3xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SDADC_MODULE_ENABLED - #include "stm32f3xx_hal_sdadc.h" -#endif /* HAL_SDADC_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f3xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f3xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f3xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f3xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_TSC_MODULE_ENABLED - #include "stm32f3xx_hal_tsc.h" -#endif /* HAL_TSC_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f3xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f3xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f3xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F3xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld b/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld deleted file mode 100755 index 57ef61e2..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld +++ /dev/null @@ -1,189 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F405RGTx Device with -** 1024KByte FLASH, 128KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20020000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K -CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 64K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - _siccmram = LOADADDR(.ccmram); - - /* CCM-RAM section - * - * IMPORTANT NOTE! - * If initialized variables will be placed in this section, - * the startup code needs to be modified to copy the init-values. - */ - .ccmram : - { - . = ALIGN(4); - _sccmram = .; /* create a global symbol at ccmram start */ - *(.ccmram) - *(.ccmram*) - - . = ALIGN(4); - _eccmram = .; /* create a global symbol at ccmram end */ - } >CCMRAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/board.h b/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/board.h deleted file mode 100755 index 19d0a1ea..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/board.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PORT GPIOC -#define LED_PIN GPIO_PIN_1 -#define LED_STATE_ON 1 - -// Button: Pin D5 -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_7 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_DEV USART3 -#define UART_GPIO_PORT GPIOB -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_10 -#define UART_RX_PIN GPIO_PIN_11 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_clock_init(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* Enable Power Control clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* The voltage scaling allows optimizing the power consumption when the device is - clocked below the maximum system frequency, to update the voltage scaling value - regarding system frequency refer to product datasheet. */ - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 336; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = 7; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); - - // Enable clocks for LED, Button, Uart - __HAL_RCC_GPIOB_CLK_ENABLE(); - __HAL_RCC_GPIOC_CLK_ENABLE(); - __HAL_RCC_USART3_CLK_ENABLE(); -} - -static inline void board_vbus_sense_init(void) -{ - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/board.mk b/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/board.mk deleted file mode 100755 index 1de56fe5..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/board.mk +++ /dev/null @@ -1,12 +0,0 @@ -CFLAGS += -DSTM32F405xx - -LD_FILE = $(BOARD_PATH)/STM32F405RGTx_FLASH.ld - -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f405xx.s - -# For flash-jlink target -JLINK_DEVICE = stm32f405rg - -# flash target ROM bootloader -flash: $(BUILD)/$(PROJECT).bin - dfu-util -R -a 0 --dfuse-address 0x08000000 -D $< diff --git a/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/stm32f4xx_hal_conf.h b/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/stm32f4xx_hal_conf.h deleted file mode 100755 index b892df3b..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/feather_stm32f405/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,491 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf.h - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED - -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_PCD_MODULE_ENABLED -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_EXTI_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -#define HAL_DMA_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -#define HAL_PWR_MODULE_ENABLED -#define HAL_CORTEX_MODULE_ENABLED - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)12000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature.*/ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -/* Copied over manually- STM32Cube didn't generate these for some reason. */ -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848_PHY_ADDRESS Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY ((uint32_t)0x000000FFU) -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU) - -#define PHY_READ_TO ((uint32_t)0x0000FFFFU) -#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU) - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ -#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ - -#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 0U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld b/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld deleted file mode 100755 index 57ef61e2..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld +++ /dev/null @@ -1,189 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F405RGTx Device with -** 1024KByte FLASH, 128KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20020000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K -CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 64K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - _siccmram = LOADADDR(.ccmram); - - /* CCM-RAM section - * - * IMPORTANT NOTE! - * If initialized variables will be placed in this section, - * the startup code needs to be modified to copy the init-values. - */ - .ccmram : - { - . = ALIGN(4); - _sccmram = .; /* create a global symbol at ccmram start */ - *(.ccmram) - *(.ccmram*) - - . = ALIGN(4); - _eccmram = .; /* create a global symbol at ccmram end */ - } >CCMRAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/board.h b/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/board.h deleted file mode 100755 index 685919c5..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/board.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// Blue LED is chosen because the other LEDs are connected to ST-LINK lines. -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_4 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOB -#define BUTTON_PIN GPIO_PIN_3 -#define BUTTON_STATE_ACTIVE 1 - -// Enable PA2 as the debug log UART -// It is not routed to the ST/Link on the Discovery board. -//#define UART_DEV USART2 -//#define UART_GPIO_PORT GPIOA -//#define UART_GPIO_AF GPIO_AF7_USART2 -//#define UART_TX_PIN GPIO_PIN_2 -//#define UART_RX_PIN GPIO_PIN_3 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_clock_init(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* Enable Power Control clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* The voltage scaling allows optimizing the power consumption when the device is - clocked below the maximum system frequency, to update the voltage scaling value - regarding system frequency refer to product datasheet. */ - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 336; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = 7; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); - - // Enable clocks for LED, Button, Uart - __HAL_RCC_GPIOB_CLK_ENABLE(); -} - -static inline void board_vbus_sense_init(void) -{ - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/board.mk b/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/board.mk deleted file mode 100755 index 02dcd121..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -DSTM32F405xx - -LD_FILE = $(BOARD_PATH)/STM32F405RGTx_FLASH.ld - -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f405xx.s - -# For flash-jlink target -JLINK_DEVICE = stm32f405rg - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/stm32f4xx_hal_conf.h b/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/stm32f4xx_hal_conf.h deleted file mode 100755 index b892df3b..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/pyboardv11/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,491 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf.h - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED - -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_PCD_MODULE_ENABLED -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_EXTI_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -#define HAL_DMA_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -#define HAL_PWR_MODULE_ENABLED -#define HAL_CORTEX_MODULE_ENABLED - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)12000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature.*/ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -/* Copied over manually- STM32Cube didn't generate these for some reason. */ -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848_PHY_ADDRESS Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY ((uint32_t)0x000000FFU) -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU) - -#define PHY_READ_TO ((uint32_t)0x0000FFFFU) -#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU) - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ -#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ - -#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 0U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld b/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld deleted file mode 100755 index f51f1ab4..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld +++ /dev/null @@ -1,169 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F401VCTx Device with -** 256KByte FLASH, 64KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20010000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200;; /* required amount of heap */ -_Min_Stack_Size = 0x400;; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h b/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h deleted file mode 100755 index 0f820512..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PORT GPIOC -#define LED_PIN GPIO_PIN_13 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 0 - -// Enable PA2 as the debug log UART -//#define UART_DEV USART2 -//#define UART_GPIO_PORT GPIOA -//#define UART_GPIO_AF GPIO_AF7_USART2 -//#define UART_TX_PIN GPIO_PIN_2 -//#define UART_RX_PIN GPIO_PIN_3 - - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_clock_init(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* Enable Power Control clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* The voltage scaling allows optimizing the power consumption when the device is - clocked below the maximum system frequency, to update the voltage scaling value - regarding system frequency refer to product datasheet. */ - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2); - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 336; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; - RCC_OscInitStruct.PLL.PLLQ = 7; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); - - // Enable clocks for LED, Button, Uart - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOC_CLK_ENABLE(); - //__HAL_RCC_USART2_CLK_ENABLE(); -} - -static inline void board_vbus_sense_init(void) -{ - // Blackpill doens't use VBUS sense (B device) explicitly disable it - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/board.mk b/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/board.mk deleted file mode 100755 index de0f3d4c..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/board.mk +++ /dev/null @@ -1,12 +0,0 @@ -CFLAGS += -DSTM32F401xC - -LD_FILE = $(BOARD_PATH)/STM32F401VCTx_FLASH.ld - -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f401xc.s - -# For flash-jlink target -JLINK_DEVICE = stm32f401cc - -# flash target ROM bootloader -flash: $(BUILD)/$(PROJECT).bin - dfu-util -R -a 0 --dfuse-address 0x08000000 -D $< diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h b/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h deleted file mode 100755 index 2ab9a1d5..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,493 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf_template.h - * @author MCD Application Team - * @brief HAL configuration file - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -// #define HAL_SPI_MODULE_ENABLED -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE (25000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848 PHY Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY 0x000000FFU -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY 0x00000FFFU - -#define PHY_READ_TO 0x0000FFFFU -#define PHY_WRITE_TO 0x0000FFFFU - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ -#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ -#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - -#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ -#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ - -#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ -#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ - -#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ -#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f4xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f4xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld b/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld deleted file mode 100755 index c4160272..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld +++ /dev/null @@ -1,189 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F407VGTx Device with -** 1024KByte FLASH, 128KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20020000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x1000; /* required amount of heap */ -_Min_Stack_Size = 0x4000; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ - RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K - CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 64K - FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - _siccmram = LOADADDR(.ccmram); - - /* CCM-RAM section - * - * IMPORTANT NOTE! - * If initialized variables will be placed in this section, - * the startup code needs to be modified to copy the init-values. - */ - .ccmram : - { - . = ALIGN(4); - _sccmram = .; /* create a global symbol at ccmram start */ - *(.ccmram) - *(.ccmram*) - - . = ALIGN(4); - _eccmram = .; /* create a global symbol at ccmram end */ - } >CCMRAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/board.h b/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/board.h deleted file mode 100755 index 693e0393..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/board.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PORT GPIOD -#define LED_PIN GPIO_PIN_14 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - -// Enable PA2 as the debug log UART -// It is not routed to the ST/Link on the Discovery board. -#define UART_DEV USART2 -#define UART_GPIO_PORT GPIOA -#define UART_GPIO_AF GPIO_AF7_USART2 -#define UART_TX_PIN GPIO_PIN_2 -#define UART_RX_PIN GPIO_PIN_3 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_clock_init(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* Enable Power Control clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* The voltage scaling allows optimizing the power consumption when the device is - clocked below the maximum system frequency, to update the voltage scaling value - regarding system frequency refer to product datasheet. */ - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 336; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = 7; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); - - // Enable clocks for LED, Button, Uart - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOD_CLK_ENABLE(); - __HAL_RCC_USART2_CLK_ENABLE(); -} - -static inline void board_vbus_sense_init(void) -{ - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/board.mk b/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/board.mk deleted file mode 100755 index 212b924b..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -DSTM32F407xx - -LD_FILE = $(BOARD_PATH)/STM32F407VGTx_FLASH.ld - -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f407xx.s - -# For flash-jlink target -JLINK_DEVICE = stm32f407vg - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h b/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h deleted file mode 100755 index 7864f8d5..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,493 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf_template.h - * @author MCD Application Team - * @brief HAL configuration file - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -// #define HAL_SPI_MODULE_ENABLED -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848 PHY Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY 0x000000FFU -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY 0x00000FFFU - -#define PHY_READ_TO 0x0000FFFFU -#define PHY_WRITE_TO 0x0000FFFFU - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ -#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ -#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - -#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ -#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ - -#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ -#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ - -#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ -#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f4xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f4xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld b/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld deleted file mode 100755 index efea1e06..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld +++ /dev/null @@ -1,169 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F411CEUx Device with -** 512KByte FLASH, 128KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20020000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200;; /* required amount of heap */ -_Min_Stack_Size = 0x400;; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(4); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(4); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h b/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h deleted file mode 100755 index 0f820512..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PORT GPIOC -#define LED_PIN GPIO_PIN_13 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 0 - -// Enable PA2 as the debug log UART -//#define UART_DEV USART2 -//#define UART_GPIO_PORT GPIOA -//#define UART_GPIO_AF GPIO_AF7_USART2 -//#define UART_TX_PIN GPIO_PIN_2 -//#define UART_RX_PIN GPIO_PIN_3 - - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_clock_init(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* Enable Power Control clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* The voltage scaling allows optimizing the power consumption when the device is - clocked below the maximum system frequency, to update the voltage scaling value - regarding system frequency refer to product datasheet. */ - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2); - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 336; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; - RCC_OscInitStruct.PLL.PLLQ = 7; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); - - // Enable clocks for LED, Button, Uart - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOC_CLK_ENABLE(); - //__HAL_RCC_USART2_CLK_ENABLE(); -} - -static inline void board_vbus_sense_init(void) -{ - // Blackpill doens't use VBUS sense (B device) explicitly disable it - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/board.mk b/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/board.mk deleted file mode 100755 index 78be4348..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/board.mk +++ /dev/null @@ -1,12 +0,0 @@ -CFLAGS += -DSTM32F411xE - -LD_FILE = $(BOARD_PATH)/STM32F411CEUx_FLASH.ld - -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f411xe.s - -# For flash-jlink target -JLINK_DEVICE = stm32f411ce - -# flash target ROM bootloader -flash: $(BUILD)/$(PROJECT).bin - dfu-util -R -a 0 --dfuse-address 0x08000000 -D $< diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h b/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h deleted file mode 100755 index 2ab9a1d5..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,493 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf_template.h - * @author MCD Application Team - * @brief HAL configuration file - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -// #define HAL_SPI_MODULE_ENABLED -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE (25000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848 PHY Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY 0x000000FFU -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY 0x00000FFFU - -#define PHY_READ_TO 0x0000FFFFU -#define PHY_WRITE_TO 0x0000FFFFU - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ -#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ -#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - -#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ -#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ - -#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ -#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ - -#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ -#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f4xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f4xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld b/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld deleted file mode 100755 index 3a0ce526..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld +++ /dev/null @@ -1,169 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F411VETx Device with -** 512KByte FLASH, 128KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20020000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200;; /* required amount of heap */ -_Min_Stack_Size = 0x400;; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/board.h b/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/board.h deleted file mode 100755 index 008a94a5..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/board.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// Orange LED -#define LED_PORT GPIOD -#define LED_PIN GPIO_PIN_13 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - -// Enable PA2 as the debug log UART -#define UART_DEV USART2 -#define UART_GPIO_PORT GPIOA -#define UART_GPIO_AF GPIO_AF7_USART2 -#define UART_TX_PIN GPIO_PIN_2 -#define UART_RX_PIN GPIO_PIN_3 - - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_clock_init(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* Enable Power Control clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* The voltage scaling allows optimizing the power consumption when the device is - clocked below the maximum system frequency, to update the voltage scaling value - regarding system frequency refer to product datasheet. */ - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2); - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 336; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; - RCC_OscInitStruct.PLL.PLLQ = 7; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); - - // Enable clocks for LED, Button, Uart - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOD_CLK_ENABLE(); - __HAL_RCC_USART2_CLK_ENABLE(); -} - -static inline void board_vbus_sense_init(void) -{ - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/board.mk b/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/board.mk deleted file mode 100755 index 48272acf..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -DSTM32F411xE - -LD_FILE = $(BOARD_PATH)/STM32F411VETx_FLASH.ld - -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f411xe.s - -# For flash-jlink target -JLINK_DEVICE = stm32f411ve - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h b/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h deleted file mode 100755 index 7864f8d5..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,493 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf_template.h - * @author MCD Application Team - * @brief HAL configuration file - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -// #define HAL_SPI_MODULE_ENABLED -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848 PHY Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY 0x000000FFU -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY 0x00000FFFU - -#define PHY_READ_TO 0x0000FFFFU -#define PHY_WRITE_TO 0x0000FFFFU - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ -#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ -#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - -#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ -#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ - -#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ -#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ - -#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ -#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f4xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f4xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld b/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld deleted file mode 100755 index b00b5dbe..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld +++ /dev/null @@ -1,169 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F412ZGTx Device with -** 1024KByte FLASH, 256KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20040000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 256K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/board.h b/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/board.h deleted file mode 100755 index 7f4a4fa1..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/board.h +++ /dev/null @@ -1,118 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PORT GPIOE -#define LED_PIN GPIO_PIN_2 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - -// UART Enable PA2 as the debug log UART -#define UART_DEV USART2 -#define UART_GPIO_PORT GPIOA -#define UART_GPIO_AF GPIO_AF7_USART2 -#define UART_TX_PIN GPIO_PIN_2 -#define UART_RX_PIN GPIO_PIN_3 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_clock_init(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; - - /* Enable Power Control clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* The voltage scaling allows optimizing the power consumption when the - * device is clocked below the maximum system frequency, to update the - * voltage scaling value regarding system frequency refer to product - * datasheet. */ - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 200; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = 7; - RCC_OscInitStruct.PLL.PLLR = 2; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Select PLLSAI output as USB clock source */ - PeriphClkInitStruct.PLLI2S.PLLI2SM = 8; - PeriphClkInitStruct.PLLI2S.PLLI2SQ = 4; - PeriphClkInitStruct.PLLI2S.PLLI2SN = 192; - PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_CK48; - PeriphClkInitStruct.Clk48ClockSelection = RCC_CK48CLKSOURCE_PLLI2SQ; - PeriphClkInitStruct.PLLI2SSelection = RCC_PLLI2SCLKSOURCE_PLLSRC; - PeriphClkInitStruct.PLLI2S.PLLI2SR = 7; - HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - * clocks dividers */ - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | - RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; - - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3); - - // Enable clocks for LED, Button, Uart - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOE_CLK_ENABLE(); - __HAL_RCC_USART2_CLK_ENABLE(); -} - -static inline void board_vbus_sense_init(void) -{ - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/board.mk b/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/board.mk deleted file mode 100755 index 50973f73..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -DSTM32F412Zx - -LD_FILE = $(BOARD_PATH)/STM32F412ZGTx_FLASH.ld - -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f412zx.s - -# For flash-jlink target -JLINK_DEVICE = stm32f412zg - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h b/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h deleted file mode 100755 index 7864f8d5..00000000 --- a/tinyusb/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,493 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf_template.h - * @author MCD Application Team - * @brief HAL configuration file - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -// #define HAL_SPI_MODULE_ENABLED -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848 PHY Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY 0x000000FFU -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY 0x00000FFFU - -#define PHY_READ_TO 0x0000FFFFU -#define PHY_WRITE_TO 0x0000FFFFU - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ -#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ -#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - -#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ -#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ - -#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ -#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ - -#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ -#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f4xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f4xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f4/family.c b/tinyusb/hw/bsp/stm32f4/family.c deleted file mode 100755 index 4a0dbcb1..00000000 --- a/tinyusb/hw/bsp/stm32f4/family.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "stm32f4xx_hal.h" -#include "bsp/board.h" -#include "board.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void OTG_FS_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -UART_HandleTypeDef UartHandle; - -void board_init(void) -{ - board_clock_init(); - //SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - GPIO_InitTypeDef GPIO_InitStruct; - - // LED - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - board_led_write(false); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN : GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - -#ifdef UART_DEV - // UART - GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = UART_GPIO_AF; - HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); - - UartHandle = (UART_HandleTypeDef){ - .Instance = UART_DEV, - .Init.BaudRate = CFG_BOARD_UART_BAUDRATE, - .Init.WordLength = UART_WORDLENGTH_8B, - .Init.StopBits = UART_STOPBITS_1, - .Init.Parity = UART_PARITY_NONE, - .Init.HwFlowCtl = UART_HWCONTROL_NONE, - .Init.Mode = UART_MODE_TX_RX, - .Init.OverSampling = UART_OVERSAMPLING_16 - }; - HAL_UART_Init(&UartHandle); -#endif - - /* Configure USB FS GPIOs */ - __HAL_RCC_GPIOA_CLK_ENABLE(); - - /* Configure USB D+ D- Pins */ - GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12; - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Configure VBUS Pin */ - GPIO_InitStruct.Pin = GPIO_PIN_9; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* ID Pin */ - GPIO_InitStruct.Pin = GPIO_PIN_10; - GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - -#ifdef STM32F412Zx - /* Configure POWER_SWITCH IO pin */ - __HAL_RCC_GPIOG_CLK_ENABLE(); - GPIO_InitStruct.Pin = GPIO_PIN_8; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOG, &GPIO_InitStruct); -#endif - - // Enable USB OTG clock - __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); - - board_vbus_sense_init(); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ -#ifdef UART_DEV - HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff); - return len; -#else - (void) buf; (void) len; (void) UartHandle; - return 0; -#endif -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - asm("bkpt"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/tinyusb/hw/bsp/stm32f4/family.mk b/tinyusb/hw/bsp/stm32f4/family.mk deleted file mode 100755 index 584d6940..00000000 --- a/tinyusb/hw/bsp/stm32f4/family.mk +++ /dev/null @@ -1,43 +0,0 @@ -UF2_FAMILY_ID = 0x57755a57 -ST_FAMILY = f4 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -include $(TOP)/$(BOARD_PATH)/board.mk - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib -nostartfiles \ - -DCFG_TUSB_MCU=OPT_MCU_STM32F4 - -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=cast-align - -SRC_C += \ - src/portable/st/synopsys/dcd_synopsys.c \ - $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM4F - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/STM32F723xE_FLASH.ld b/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/STM32F723xE_FLASH.ld deleted file mode 100755 index 8645ce5c..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/STM32F723xE_FLASH.ld +++ /dev/null @@ -1,167 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F723xE Device with -** 512KByte FLASH, 256KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20040000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x460; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 256K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 512K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/board.h b/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/board.h deleted file mode 100755 index d0ef6625..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/board.h +++ /dev/null @@ -1,101 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define LED_PORT GPIOA -#define LED_PIN GPIO_PIN_10 -#define LED_STATE_ON 1 - -// No physical button is populated -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - -#define UART_DEV USART6 -#define UART_CLK_EN __HAL_RCC_USART6_CLK_ENABLE -#define UART_GPIO_AF GPIO_AF8_USART6 - -#define UART_TX_PORT GPIOG -#define UART_TX_PIN GPIO_PIN_9 - -#define UART_RX_PORT GPIOG -#define UART_RX_PIN GPIO_PIN_14 - -// VBUS Sense detection -#define OTG_FS_VBUS_SENSE 1 -#define OTG_HS_VBUS_SENSE 0 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_clock_init(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* Enable Power Control clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* The voltage scaling allows optimizing the power consumption when the device is - clocked below the maximum system frequency, to update the voltage scaling value - regarding system frequency refer to product datasheet. */ - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 432; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = 9; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Activate the OverDrive to reach the 216 MHz Frequency */ - HAL_PWREx_EnableOverDrive(); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; - - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7); -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/board.mk b/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/board.mk deleted file mode 100755 index a18b3231..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/board.mk +++ /dev/null @@ -1,14 +0,0 @@ -# Only OTG-HS has a connector on this board -PORT ?= 1 -SPEED ?= high - -CFLAGS += \ - -DSTM32F723xx \ - -DHSE_VALUE=25000000 \ - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/STM32F723xE_FLASH.ld -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f723xx.s - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/stm32f7xx_hal_conf.h b/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/stm32f7xx_hal_conf.h deleted file mode 100755 index 581f0e46..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stlinkv3mini/stm32f7xx_hal_conf.h +++ /dev/null @@ -1,472 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_CONF_H -#define __STM32F7xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -/* #define HAL_JPEG_MODULE_ENABLED */ -/* #define HAL_MDIOS_MODULE_ENABLED */ - - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)25000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define ART_ACCLERATOR_ENABLE 1U /* To enable instruction cache and prefetch */ - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIOS register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1 */ - -/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB ((uint32_t)5) /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ -/* LAN8742A PHY Address*/ -#define LAN8742A_PHY_ADDRESS 0x00 -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY ((uint32_t)0x00000FFF) -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) - -#define PHY_READ_TO ((uint32_t)0x0000FFFF) -#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ - -#define PHY_SPEED_STATUS ((uint16_t)0x0004) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0010) /*!< PHY Duplex mask */ - - -#define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ -#define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f7xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f7xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f7xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f7xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f7xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f7xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f7xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f7xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f7xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f7xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f7xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f7xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f7xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f7xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f7xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f7xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f7xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f7xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f7xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f7xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f7xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f7xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f7xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f7xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f7xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f7xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f7xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f7xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f7xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f7xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f7xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f7xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f7xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f7xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f7xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f7xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f7xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f7xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f7xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f7xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f7xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f7xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f7xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_JPEG_MODULE_ENABLED - #include "stm32f7xx_hal_jpeg.h" -#endif /* HAL_JPEG_MODULE_ENABLED */ - -#ifdef HAL_MDIOS_MODULE_ENABLED - #include "stm32f7xx_hal_mdios.h" -#endif /* HAL_MDIOS_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/STM32F723xE_FLASH.ld b/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/STM32F723xE_FLASH.ld deleted file mode 100755 index 8645ce5c..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/STM32F723xE_FLASH.ld +++ /dev/null @@ -1,167 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F723xE Device with -** 512KByte FLASH, 256KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20040000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x460; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 256K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 512K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/board.h b/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/board.h deleted file mode 100755 index 93d83efc..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/board.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_1 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - -#define UART_DEV USART6 -#define UART_CLK_EN __HAL_RCC_USART6_CLK_ENABLE -#define UART_GPIO_AF GPIO_AF8_USART6 - -#define UART_TX_PORT GPIOC -#define UART_TX_PIN GPIO_PIN_6 - -#define UART_RX_PORT GPIOC -#define UART_RX_PIN GPIO_PIN_7 - -// VBUS Sense detection -#define OTG_FS_VBUS_SENSE 1 -#define OTG_HS_VBUS_SENSE 0 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_clock_init(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* Enable Power Control clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* The voltage scaling allows optimizing the power consumption when the device is - clocked below the maximum system frequency, to update the voltage scaling value - regarding system frequency refer to product datasheet. */ - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 432; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = 9; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Activate the OverDrive to reach the 216 MHz Frequency */ - HAL_PWREx_EnableOverDrive(); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; - - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7); -} - -//static inline void board_vbus_sense_init(void) -//{ -// -//} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/board.mk b/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/board.mk deleted file mode 100755 index 8f05199d..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/board.mk +++ /dev/null @@ -1,12 +0,0 @@ -PORT ?= 1 -SPEED ?= high - -CFLAGS += \ - -DSTM32F723xx \ - -DHSE_VALUE=25000000 \ - -LD_FILE = $(BOARD_PATH)/STM32F723xE_FLASH.ld -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f723xx.s - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/stm32f7xx_hal_conf.h b/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/stm32f7xx_hal_conf.h deleted file mode 100755 index 581f0e46..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stm32f723disco/stm32f7xx_hal_conf.h +++ /dev/null @@ -1,472 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_CONF_H -#define __STM32F7xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -/* #define HAL_JPEG_MODULE_ENABLED */ -/* #define HAL_MDIOS_MODULE_ENABLED */ - - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)25000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define ART_ACCLERATOR_ENABLE 1U /* To enable instruction cache and prefetch */ - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIOS register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1 */ - -/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB ((uint32_t)5) /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ -/* LAN8742A PHY Address*/ -#define LAN8742A_PHY_ADDRESS 0x00 -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY ((uint32_t)0x00000FFF) -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) - -#define PHY_READ_TO ((uint32_t)0x0000FFFF) -#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ - -#define PHY_SPEED_STATUS ((uint16_t)0x0004) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0010) /*!< PHY Duplex mask */ - - -#define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ -#define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f7xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f7xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f7xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f7xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f7xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f7xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f7xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f7xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f7xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f7xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f7xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f7xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f7xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f7xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f7xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f7xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f7xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f7xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f7xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f7xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f7xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f7xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f7xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f7xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f7xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f7xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f7xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f7xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f7xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f7xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f7xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f7xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f7xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f7xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f7xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f7xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f7xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f7xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f7xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f7xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f7xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f7xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f7xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_JPEG_MODULE_ENABLED - #include "stm32f7xx_hal_jpeg.h" -#endif /* HAL_JPEG_MODULE_ENABLED */ - -#ifdef HAL_MDIOS_MODULE_ENABLED - #include "stm32f7xx_hal_mdios.h" -#endif /* HAL_MDIOS_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/STM32F746ZGTx_FLASH.ld b/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/STM32F746ZGTx_FLASH.ld deleted file mode 100755 index 045ec76f..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/STM32F746ZGTx_FLASH.ld +++ /dev/null @@ -1,167 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F746ZGTx Device with -** 1024KByte FLASH, 320KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20050000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x460; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 320K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/board.h b/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/board.h deleted file mode 100755 index ee342b9f..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/board.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define LED_PORT GPIOI -#define LED_PIN GPIO_PIN_1 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOI -#define BUTTON_PIN GPIO_PIN_11 -#define BUTTON_STATE_ACTIVE 1 - -#define UART_DEV USART1 -#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE -#define UART_GPIO_AF GPIO_AF7_USART1 - -#define UART_TX_PORT GPIOA -#define UART_TX_PIN GPIO_PIN_9 - -#define UART_RX_PORT GPIOB -#define UART_RX_PIN GPIO_PIN_7 - -// VBUS Sense detection -#define OTG_FS_VBUS_SENSE 0 -#define OTG_HS_VBUS_SENSE 0 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_clock_init(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* Enable Power Control clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* The voltage scaling allows optimizing the power consumption when the device is - clocked below the maximum system frequency, to update the voltage scaling value - regarding system frequency refer to product datasheet. */ - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 432; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = 9; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Activate the OverDrive to reach the 216 MHz Frequency */ - HAL_PWREx_EnableOverDrive(); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; - - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7); -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/board.mk b/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/board.mk deleted file mode 100755 index 2ba59f67..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/board.mk +++ /dev/null @@ -1,12 +0,0 @@ -PORT ?= 1 -SPEED ?= high - -CFLAGS += \ - -DSTM32F746xx \ - -DHSE_VALUE=25000000 - -LD_FILE = $(BOARD_PATH)/STM32F746ZGTx_FLASH.ld -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f746xx.s - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/stm32f7xx_hal_conf.h b/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/stm32f7xx_hal_conf.h deleted file mode 100755 index 03dec8f0..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stm32f746disco/stm32f7xx_hal_conf.h +++ /dev/null @@ -1,472 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_CONF_H -#define __STM32F7xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -/* #define HAL_JPEG_MODULE_ENABLED */ -/* #define HAL_MDIOS_MODULE_ENABLED */ - - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define ART_ACCLERATOR_ENABLE 1U /* To enable instruction cache and prefetch */ - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIOS register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1 */ - -/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB ((uint32_t)5) /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ -/* LAN8742A PHY Address*/ -#define LAN8742A_PHY_ADDRESS 0x00 -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY ((uint32_t)0x00000FFF) -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) - -#define PHY_READ_TO ((uint32_t)0x0000FFFF) -#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ - -#define PHY_SPEED_STATUS ((uint16_t)0x0004) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0010) /*!< PHY Duplex mask */ - - -#define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ -#define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f7xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f7xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f7xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f7xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f7xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f7xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f7xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f7xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f7xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f7xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f7xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f7xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f7xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f7xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f7xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f7xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f7xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f7xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f7xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f7xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f7xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f7xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f7xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f7xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f7xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f7xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f7xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f7xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f7xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f7xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f7xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f7xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f7xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f7xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f7xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f7xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f7xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f7xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f7xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f7xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f7xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f7xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f7xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_JPEG_MODULE_ENABLED - #include "stm32f7xx_hal_jpeg.h" -#endif /* HAL_JPEG_MODULE_ENABLED */ - -#ifdef HAL_MDIOS_MODULE_ENABLED - #include "stm32f7xx_hal_mdios.h" -#endif /* HAL_MDIOS_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld b/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld deleted file mode 100755 index b434a01b..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld +++ /dev/null @@ -1,167 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F746ZGTx Device with -** 1024KByte FLASH, 320KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20050000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x460; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 320K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h b/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h deleted file mode 100755 index 093445ed..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_14 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - -#define UART_DEV USART3 -#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define UART_GPIO_AF GPIO_AF7_USART3 - -#define UART_TX_PORT GPIOD -#define UART_TX_PIN GPIO_PIN_8 -#define UART_RX_PORT GPIOD -#define UART_RX_PIN GPIO_PIN_9 - -// VBUS Sense detection -#define OTG_FS_VBUS_SENSE 1 -#define OTG_HS_VBUS_SENSE 0 - -static inline void board_clock_init(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* Enable Power Control clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* The voltage scaling allows optimizing the power consumption when the device is - clocked below the maximum system frequency, to update the voltage scaling value - regarding system frequency refer to product datasheet. */ - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 432; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = 9; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Activate the OverDrive to reach the 216 MHz Frequency */ - HAL_PWREx_EnableOverDrive(); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; - - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7); -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/board.mk b/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/board.mk deleted file mode 100755 index 3dcf4817..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/board.mk +++ /dev/null @@ -1,12 +0,0 @@ -PORT ?= 0 -SPEED ?= full - -CFLAGS += \ - -DSTM32F746xx \ - -DHSE_VALUE=8000000 - -LD_FILE = $(BOARD_PATH)/STM32F746ZGTx_FLASH.ld -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f746xx.s - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h b/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h deleted file mode 100755 index 234191b0..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h +++ /dev/null @@ -1,472 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_CONF_H -#define __STM32F7xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -/* #define HAL_JPEG_MODULE_ENABLED */ -/* #define HAL_MDIOS_MODULE_ENABLED */ - - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define ART_ACCLERATOR_ENABLE 1U /* To enable instruction cache and prefetch */ - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIOS register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1 */ - -/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB ((uint32_t)5) /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ -/* LAN8742A PHY Address*/ -#define LAN8742A_PHY_ADDRESS 0x00 -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY ((uint32_t)0x00000FFF) -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) - -#define PHY_READ_TO ((uint32_t)0x0000FFFF) -#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ - -#define PHY_SPEED_STATUS ((uint16_t)0x0004) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0010) /*!< PHY Duplex mask */ - - -#define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ -#define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f7xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f7xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f7xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f7xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f7xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f7xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f7xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f7xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f7xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f7xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f7xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f7xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f7xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f7xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f7xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f7xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f7xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f7xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f7xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f7xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f7xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f7xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f7xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f7xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f7xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f7xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f7xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f7xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f7xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f7xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f7xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f7xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f7xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f7xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f7xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f7xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f7xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f7xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f7xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f7xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f7xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f7xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f7xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_JPEG_MODULE_ENABLED - #include "stm32f7xx_hal_jpeg.h" -#endif /* HAL_JPEG_MODULE_ENABLED */ - -#ifdef HAL_MDIOS_MODULE_ENABLED - #include "stm32f7xx_hal_mdios.h" -#endif /* HAL_MDIOS_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld b/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld deleted file mode 100755 index 0b6d5a49..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld +++ /dev/null @@ -1,169 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F767ZITx Device with -** 2048KByte FLASH, 512KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20080000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 2048K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 512K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h b/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h deleted file mode 100755 index 1283f231..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_14 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - -#define UART_DEV USART3 -#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define UART_GPIO_AF GPIO_AF7_USART3 - -#define UART_TX_PORT GPIOD -#define UART_TX_PIN GPIO_PIN_8 - -#define UART_RX_PORT GPIOD -#define UART_RX_PIN GPIO_PIN_9 - -// VBUS Sense detection -#define OTG_FS_VBUS_SENSE 1 -#define OTG_HS_VBUS_SENSE 0 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_clock_init(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* Enable Power Control clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* The voltage scaling allows optimizing the power consumption when the device is - clocked below the maximum system frequency, to update the voltage scaling value - regarding system frequency refer to product datasheet. */ - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 432; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = 9; - RCC_OscInitStruct.PLL.PLLR = 7; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Activate the OverDrive to reach the 216 MHz Frequency */ - HAL_PWREx_EnableOverDrive(); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; - - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7); -} - - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk b/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk deleted file mode 100755 index 2400a4ba..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk +++ /dev/null @@ -1,12 +0,0 @@ -PORT ?= 0 -SPEED ?= full - -CFLAGS += \ - -DSTM32F767xx \ - -DHSE_VALUE=8000000 \ - -LD_FILE = $(BOARD_PATH)/STM32F767ZITx_FLASH.ld -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f767xx.s - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h b/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h deleted file mode 100755 index 234191b0..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h +++ /dev/null @@ -1,472 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_CONF_H -#define __STM32F7xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -/* #define HAL_JPEG_MODULE_ENABLED */ -/* #define HAL_MDIOS_MODULE_ENABLED */ - - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define ART_ACCLERATOR_ENABLE 1U /* To enable instruction cache and prefetch */ - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIOS register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1 */ - -/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB ((uint32_t)5) /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ -/* LAN8742A PHY Address*/ -#define LAN8742A_PHY_ADDRESS 0x00 -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY ((uint32_t)0x00000FFF) -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) - -#define PHY_READ_TO ((uint32_t)0x0000FFFF) -#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ - -#define PHY_SPEED_STATUS ((uint16_t)0x0004) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0010) /*!< PHY Duplex mask */ - - -#define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ -#define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f7xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f7xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f7xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f7xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f7xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f7xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f7xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f7xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f7xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f7xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f7xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f7xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f7xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f7xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f7xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f7xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f7xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f7xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f7xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f7xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f7xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f7xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f7xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f7xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f7xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f7xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f7xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f7xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f7xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f7xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f7xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f7xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f7xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f7xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f7xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f7xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f7xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f7xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f7xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f7xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f7xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f7xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f7xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_JPEG_MODULE_ENABLED - #include "stm32f7xx_hal_jpeg.h" -#endif /* HAL_JPEG_MODULE_ENABLED */ - -#ifdef HAL_MDIOS_MODULE_ENABLED - #include "stm32f7xx_hal_mdios.h" -#endif /* HAL_MDIOS_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/STM32F769ZITx_FLASH.ld b/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/STM32F769ZITx_FLASH.ld deleted file mode 100755 index 378ed80d..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/STM32F769ZITx_FLASH.ld +++ /dev/null @@ -1,167 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F767ZITx Device with -** 2048KByte FLASH, 512KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20080000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 2048K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 512K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/board.h b/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/board.h deleted file mode 100755 index 5ec217f5..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/board.h +++ /dev/null @@ -1,101 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define LED_PORT GPIOJ -#define LED_PIN GPIO_PIN_12 -#define LED_STATE_ON 5 - -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - -#define UART_DEV USART1 -#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE -#define UART_GPIO_AF GPIO_AF7_USART1 - -#define UART_TX_PORT GPIOA -#define UART_TX_PIN GPIO_PIN_9 - -#define UART_RX_PORT GPIOA -#define UART_RX_PIN GPIO_PIN_10 - -// VBUS Sense detection -#define OTG_FS_VBUS_SENSE 1 -#define OTG_HS_VBUS_SENSE 0 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_clock_init(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* Enable Power Control clock */ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* The voltage scaling allows optimizing the power consumption when the device is - clocked below the maximum system frequency, to update the voltage scaling value - regarding system frequency refer to product datasheet. */ - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 432; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = 9; - RCC_OscInitStruct.PLL.PLLR = 7; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Activate the OverDrive to reach the 216 MHz Frequency */ - HAL_PWREx_EnableOverDrive(); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; - - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7); -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/board.mk b/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/board.mk deleted file mode 100755 index 45b4a78c..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/board.mk +++ /dev/null @@ -1,13 +0,0 @@ -# Only OTG-HS has a connector on this board -PORT ?= 1 -SPEED ?= high - -CFLAGS += \ - -DSTM32F769xx \ - -DHSE_VALUE=25000000 \ - -LD_FILE = $(BOARD_PATH)/STM32F769ZITx_FLASH.ld -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f769xx.s - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/stm32f7xx_hal_conf.h b/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/stm32f7xx_hal_conf.h deleted file mode 100755 index 581f0e46..00000000 --- a/tinyusb/hw/bsp/stm32f7/boards/stm32f769disco/stm32f7xx_hal_conf.h +++ /dev/null @@ -1,472 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f7xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F7xx_HAL_CONF_H -#define __STM32F7xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -/* #define HAL_JPEG_MODULE_ENABLED */ -/* #define HAL_MDIOS_MODULE_ENABLED */ - - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)25000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define ART_ACCLERATOR_ENABLE 1U /* To enable instruction cache and prefetch */ - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIOS register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1 */ - -/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB ((uint32_t)5) /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ -/* LAN8742A PHY Address*/ -#define LAN8742A_PHY_ADDRESS 0x00 -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY ((uint32_t)0x00000FFF) -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) - -#define PHY_READ_TO ((uint32_t)0x0000FFFF) -#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ - -#define PHY_SPEED_STATUS ((uint16_t)0x0004) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0010) /*!< PHY Duplex mask */ - - -#define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ -#define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f7xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f7xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f7xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f7xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f7xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f7xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f7xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f7xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f7xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f7xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f7xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f7xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f7xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f7xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f7xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f7xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f7xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f7xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f7xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f7xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f7xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f7xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f7xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f7xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f7xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f7xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f7xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f7xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f7xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f7xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f7xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f7xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f7xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f7xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f7xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f7xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f7xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f7xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f7xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f7xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f7xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f7xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f7xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_JPEG_MODULE_ENABLED - #include "stm32f7xx_hal_jpeg.h" -#endif /* HAL_JPEG_MODULE_ENABLED */ - -#ifdef HAL_MDIOS_MODULE_ENABLED - #include "stm32f7xx_hal_mdios.h" -#endif /* HAL_MDIOS_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F7xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32f7/family.c b/tinyusb/hw/bsp/stm32f7/family.c deleted file mode 100755 index c0d32459..00000000 --- a/tinyusb/hw/bsp/stm32f7/family.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 William D. Jones (thor0505@comcast.net), - * Uwe Bonnes (bon@elektron.ikp.physik.tu-darmstadt.de), - * Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "stm32f7xx_hal.h" -#include "bsp/board.h" -#include "board.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void OTG_FS_IRQHandler(void) -{ - tud_int_handler(0); -} - -// Despite being call USB2_OTG -// OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port -void OTG_HS_IRQHandler(void) -{ - tud_int_handler(1); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -UART_HandleTypeDef UartHandle; - -void board_init(void) -{ - board_clock_init(); - - // Enable All GPIOs clocks - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOB_CLK_ENABLE(); - __HAL_RCC_GPIOC_CLK_ENABLE(); - __HAL_RCC_GPIOD_CLK_ENABLE(); - __HAL_RCC_GPIOG_CLK_ENABLE(); - __HAL_RCC_GPIOH_CLK_ENABLE(); // ULPI NXT - __HAL_RCC_GPIOI_CLK_ENABLE(); // ULPI NXT - -#ifdef __HAL_RCC_GPIOJ_CLK_ENABLE - __HAL_RCC_GPIOJ_CLK_ENABLE(); -#endif - - UART_CLK_EN(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#endif - - GPIO_InitTypeDef GPIO_InitStruct; - - // LED - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - // Uart TX - GPIO_InitStruct.Pin = UART_TX_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = UART_GPIO_AF; - HAL_GPIO_Init(UART_TX_PORT, &GPIO_InitStruct); - - // Uart RX - GPIO_InitStruct.Pin = UART_RX_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = UART_GPIO_AF; - HAL_GPIO_Init(UART_RX_PORT, &GPIO_InitStruct); - - UartHandle.Instance = UART_DEV; - UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; - UartHandle.Init.WordLength = UART_WORDLENGTH_8B; - UartHandle.Init.StopBits = UART_STOPBITS_1; - UartHandle.Init.Parity = UART_PARITY_NONE; - UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; - UartHandle.Init.Mode = UART_MODE_TX_RX; - UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; - HAL_UART_Init(&UartHandle); - -#if BOARD_DEVICE_RHPORT_NUM == 0 - // OTG_FS - - /* Configure DM DP Pins */ - GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Configure OTG-FS ID pin */ - GPIO_InitStruct.Pin = GPIO_PIN_10; - GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Enable USB FS Clocks */ - __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); - -#if OTG_FS_VBUS_SENSE - /* Configure VBUS Pin */ - GPIO_InitStruct.Pin = GPIO_PIN_9; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; -#else - // Disable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; -#endif // vbus sense - -#else - // OTG_HS - - #ifdef USB_HS_PHYC - // MCU with built-in HS PHY such as F723, F733, F730 - - /* Configure DM DP Pins */ - GPIO_InitStruct.Pin = (GPIO_PIN_14 | GPIO_PIN_15); - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; - HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); - - // Enable HS VBUS sense (B device) via pin PB13 - USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBDEN; - - /* Configure OTG-HS ID pin */ - GPIO_InitStruct.Pin = GPIO_PIN_13; - GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; - HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); - - /* Enable PHYC Clocks */ - __HAL_RCC_OTGPHYC_CLK_ENABLE(); - - #else - // MUC with external ULPI PHY - - /* ULPI CLK */ - GPIO_InitStruct.Pin = GPIO_PIN_5; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* ULPI D0 */ - GPIO_InitStruct.Pin = GPIO_PIN_3; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* ULPI D1 D2 D3 D4 D5 D6 D7 */ - GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_5; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; - HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); - - /* ULPI STP */ - GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_2; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; - HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); - - /* NXT */ - GPIO_InitStruct.Pin = GPIO_PIN_4; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; - HAL_GPIO_Init(GPIOH, &GPIO_InitStruct); - - /* ULPI DIR */ - GPIO_InitStruct.Pin = GPIO_PIN_11; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; - HAL_GPIO_Init(GPIOI, &GPIO_InitStruct); - #endif // USB_HS_PHYC - - // Enable USB HS & ULPI Clocks - __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE(); - __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); - -#if OTG_HS_VBUS_SENSE - #error OTG HS VBUS Sense enabled is not implemented -#else - // No VBUS sense - USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; -#endif - - // Force device mode - USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD; - USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; - -#endif // BOARD_DEVICE_RHPORT_NUM - -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff); - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - asm("bkpt"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/tinyusb/hw/bsp/stm32f7/family.mk b/tinyusb/hw/bsp/stm32f7/family.mk deleted file mode 100755 index ead0c977..00000000 --- a/tinyusb/hw/bsp/stm32f7/family.mk +++ /dev/null @@ -1,54 +0,0 @@ -UF2_FAMILY_ID = 0x53b80f00 -ST_FAMILY = f7 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -include $(TOP)/$(BOARD_PATH)/board.mk - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m7 \ - -mfloat-abi=hard \ - -mfpu=fpv5-d16 \ - -nostdlib -nostartfiles \ - -DCFG_TUSB_MCU=OPT_MCU_STM32F7 \ - -DBOARD_DEVICE_RHPORT_NUM=$(PORT) - -ifeq ($(PORT), 1) - ifeq ($(SPEED), high) - CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED - $(info "Using OTG_HS in HighSpeed mode") - else - CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED - $(info "Using OTG_HS in FullSpeed mode") - endif -else - $(info "Using OTG_FS") -endif - -# mcu driver cause following warnings -CFLAGS += -Wno-error=shadow -Wno-error=cast-align - -SRC_C += \ - src/portable/st/synopsys/dcd_synopsys.c \ - $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM7/r0p1 diff --git a/tinyusb/hw/bsp/stm32h7/boards/stm32h743eval/board.h b/tinyusb/hw/bsp/stm32h7/boards/stm32h743eval/board.h deleted file mode 100755 index ab263d2b..00000000 --- a/tinyusb/hw/bsp/stm32h7/boards/stm32h743eval/board.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define LED_PORT GPIOA -#define LED_PIN GPIO_PIN_4 -#define LED_STATE_ON 1 - -// Tamper push-button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 0 - -// Need to change jumper setting J7 and J8 from RS-232 to STLink -#define UART_DEV USART1 -#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE -#define UART_GPIO_PORT GPIOB -#define UART_GPIO_AF GPIO_AF4_USART1 -#define UART_TX_PIN GPIO_PIN_14 -#define UART_RX_PIN GPIO_PIN_15 - -// VBUS Sense detection -#define OTG_FS_VBUS_SENSE 1 -#define OTG_HS_VBUS_SENSE 0 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_stm32h7_clock_init(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; - - /*!< Supply configuration update enable */ - HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY); - - /* The voltage scaling allows optimizing the power consumption when the device is - clocked below the maximum system frequency, to update the voltage scaling value - regarding system frequency refer to product datasheet. */ - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); - - while ((PWR->D3CR & (PWR_D3CR_VOSRDY)) != PWR_D3CR_VOSRDY) {} - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.HSIState = RCC_HSI_OFF; - RCC_OscInitStruct.CSIState = RCC_CSI_OFF; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - - /* PLL1 for System Clock */ - RCC_OscInitStruct.PLL.PLLM = 5; - RCC_OscInitStruct.PLL.PLLN = 160; - RCC_OscInitStruct.PLL.PLLFRACN = 0; - RCC_OscInitStruct.PLL.PLLP = 2; - RCC_OscInitStruct.PLL.PLLR = 2; - RCC_OscInitStruct.PLL.PLLQ = 4; - - RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM; - RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* PLL3 for USB Clock */ - PeriphClkInitStruct.PLL3.PLL3M = 25; - PeriphClkInitStruct.PLL3.PLL3N = 336; - PeriphClkInitStruct.PLL3.PLL3FRACN = 0; - PeriphClkInitStruct.PLL3.PLL3P = 2; - PeriphClkInitStruct.PLL3.PLL3R = 2; - PeriphClkInitStruct.PLL3.PLL3Q = 7; - - PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; - PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL3; - HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); - - /* Select PLL as system clock source and configure bus clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | \ - RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_D3PCLK1); - - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2; - RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; - RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); - - /*activate CSI clock mondatory for I/O Compensation Cell*/ - __HAL_RCC_CSI_ENABLE() ; - - /* Enable SYSCFG clock mondatory for I/O Compensation Cell */ - __HAL_RCC_SYSCFG_CLK_ENABLE() ; - - /* Enables the I/O Compensation Cell */ - HAL_EnableCompensationCell(); -} - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/tinyusb/hw/bsp/stm32h7/boards/stm32h743eval/board.mk b/tinyusb/hw/bsp/stm32h7/boards/stm32h743eval/board.mk deleted file mode 100755 index 96d14a79..00000000 --- a/tinyusb/hw/bsp/stm32h7/boards/stm32h743eval/board.mk +++ /dev/null @@ -1,13 +0,0 @@ -CFLAGS += -DSTM32H743xx -DHSE_VALUE=25000000 - -# Default is Highspeed port -PORT ?= 1 - -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s -LD_FILE = $(BOARD_PATH)/stm32h743xx_flash.ld - -# For flash-jlink target -JLINK_DEVICE = stm32h743xi - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld b/tinyusb/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld deleted file mode 100755 index 59b9ff4d..00000000 --- a/tinyusb/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld +++ /dev/null @@ -1,173 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32H743XIHx Device with -** 2048KByte FLASH, 128KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20020000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -DTCMRAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K -RAM_D1 (xrw) : ORIGIN = 0x24000000, LENGTH = 512K -RAM_D2 (xrw) : ORIGIN = 0x30000000, LENGTH = 288K -RAM_D3 (xrw) : ORIGIN = 0x38000000, LENGTH = 64K -ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 2048K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >DTCMRAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >DTCMRAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >DTCMRAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h b/tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h deleted file mode 100755 index 3a31783a..00000000 --- a/tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_0 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - -#define UART_DEV USART3 -#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define UART_GPIO_PORT GPIOD -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_8 -#define UART_RX_PIN GPIO_PIN_9 - -// VBUS Sense detection -#define OTG_FS_VBUS_SENSE 1 -#define OTG_HS_VBUS_SENSE 0 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_stm32h7_clock_init(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* The PWR block is always enabled on the H7 series- there is no clock - enable. For now, use the default VOS3 scale mode (lowest) and limit clock - frequencies to avoid potential current draw problems from bus - power when using the max clock speeds throughout the chip. */ - - /* Enable HSE Oscillator and activate PLL1 with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.HSIState = RCC_HSI_OFF; - RCC_OscInitStruct.CSIState = RCC_CSI_OFF; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 336; - RCC_OscInitStruct.PLL.PLLP = 2; - RCC_OscInitStruct.PLL.PLLQ = 7; - RCC_OscInitStruct.PLL.PLLR = 2; /* Unused */ - RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_0; - RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM; - RCC_OscInitStruct.PLL.PLLFRACN = 0; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | \ - RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | \ - RCC_CLOCKTYPE_D3PCLK1); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV1; - - /* Unlike on the STM32F4 family, it appears the maximum APB frequencies are - device-dependent- 120 MHz for this board according to Figure 2 of - the datasheet. Dividing by half will be safe for now. */ - RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2; - RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; - RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2; - - /* 4 wait states required for 168MHz and VOS3. */ - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); - - /* Like on F4, on H7, USB's actual peripheral clock and bus clock are - separate. However, the main system PLL (PLL1) doesn't have a direct - connection to the USB peripheral clock to generate 48 MHz, so we do this - dance. This will connect PLL1's Q output to the USB peripheral clock. */ - RCC_PeriphCLKInitTypeDef RCC_PeriphCLKInitStruct; - - RCC_PeriphCLKInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; - RCC_PeriphCLKInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL; - HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphCLKInitStruct); -} - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk b/tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk deleted file mode 100755 index fc670fe7..00000000 --- a/tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk +++ /dev/null @@ -1,13 +0,0 @@ -CFLAGS += -DSTM32H743xx -DHSE_VALUE=8000000 - -# Default is FulSpeed port -PORT ?= 0 - -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s -LD_FILE = $(BOARD_PATH)/stm32h743xx_flash.ld - -# For flash-jlink target -JLINK_DEVICE = stm32h743zi - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld b/tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld deleted file mode 100755 index 59b9ff4d..00000000 --- a/tinyusb/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld +++ /dev/null @@ -1,173 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32H743XIHx Device with -** 2048KByte FLASH, 128KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20020000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -DTCMRAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K -RAM_D1 (xrw) : ORIGIN = 0x24000000, LENGTH = 512K -RAM_D2 (xrw) : ORIGIN = 0x30000000, LENGTH = 288K -RAM_D3 (xrw) : ORIGIN = 0x38000000, LENGTH = 64K -ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 2048K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >DTCMRAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >DTCMRAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >DTCMRAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/tinyusb/hw/bsp/stm32h7/boards/stm32h745disco/board.h b/tinyusb/hw/bsp/stm32h7/boards/stm32h745disco/board.h deleted file mode 100755 index 30a7a9ff..00000000 --- a/tinyusb/hw/bsp/stm32h7/boards/stm32h745disco/board.h +++ /dev/null @@ -1,134 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define LED_PORT GPIOJ -#define LED_PIN GPIO_PIN_2 -#define LED_STATE_ON 1 - -// Blue push-button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - -// UART -#define UART_DEV USART3 -#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define UART_GPIO_PORT GPIOB -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_10 -#define UART_RX_PIN GPIO_PIN_11 - -// VBUS Sense detection -#define OTG_FS_VBUS_SENSE 1 -#define OTG_HS_VBUS_SENSE 0 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_stm32h7_clock_init(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; - - /*!< Supply configuration update enable */ - /* For STM32H750XB, use "HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY);" */ - HAL_PWREx_ConfigSupply(PWR_DIRECT_SMPS_SUPPLY); - - /* The voltage scaling allows optimizing the power consumption when the - device is clocked below the maximum system frequency, to update the - voltage scaling value regarding system frequency refer to product - datasheet. */ - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); - - while ((PWR->D3CR & (PWR_D3CR_VOSRDY)) != PWR_D3CR_VOSRDY) {} - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; - RCC_OscInitStruct.HSIState = RCC_HSI_OFF; - RCC_OscInitStruct.CSIState = RCC_CSI_OFF; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - - /* PLL1 for System Clock */ - RCC_OscInitStruct.PLL.PLLM = 5; - RCC_OscInitStruct.PLL.PLLN = 160; - RCC_OscInitStruct.PLL.PLLFRACN = 0; - RCC_OscInitStruct.PLL.PLLP = 2; - RCC_OscInitStruct.PLL.PLLR = 2; - RCC_OscInitStruct.PLL.PLLQ = 4; - - RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM; - RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* PLL3 for USB Clock */ - PeriphClkInitStruct.PLL3.PLL3M = 25; - PeriphClkInitStruct.PLL3.PLL3N = 336; - PeriphClkInitStruct.PLL3.PLL3FRACN = 0; - PeriphClkInitStruct.PLL3.PLL3P = 2; - PeriphClkInitStruct.PLL3.PLL3R = 2; - PeriphClkInitStruct.PLL3.PLL3Q = 7; - - PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; - PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL3; - HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); - - /* Select PLL as system clock source and configure bus clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | \ - RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_D3PCLK1); - - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2; - RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; - RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); - - /*activate CSI clock mondatory for I/O Compensation Cell*/ - __HAL_RCC_CSI_ENABLE() ; - - /* Enable SYSCFG clock mondatory for I/O Compensation Cell */ - __HAL_RCC_SYSCFG_CLK_ENABLE() ; - - /* Enables the I/O Compensation Cell */ - HAL_EnableCompensationCell(); -} - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/tinyusb/hw/bsp/stm32h7/boards/stm32h745disco/board.mk b/tinyusb/hw/bsp/stm32h7/boards/stm32h745disco/board.mk deleted file mode 100755 index 384065bd..00000000 --- a/tinyusb/hw/bsp/stm32h7/boards/stm32h745disco/board.mk +++ /dev/null @@ -1,17 +0,0 @@ -# STM32H745I-DISCO uses OTG_FS -# FIXME: Reset enumerates, un/replug USB plug does not enumerate - -CFLAGS += -DSTM32H745xx -DCORE_CM7 -DHSE_VALUE=25000000 - -# Default is FulSpeed port -PORT ?= 0 - -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h745xx.s -LD_FILE = $(ST_CMSIS)/Source/Templates/gcc/linker/stm32h745xx_flash_CM7.ld - -# For flash-jlink target -JLINK_DEVICE = stm32h745xi_m7 - -# flash target using on-board stlink -flash: flash-stlink - diff --git a/tinyusb/hw/bsp/stm32h7/family.c b/tinyusb/hw/bsp/stm32h7/family.c deleted file mode 100755 index 2cbd8741..00000000 --- a/tinyusb/hw/bsp/stm32h7/family.c +++ /dev/null @@ -1,287 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 - * William D. Jones (thor0505@comcast.net), - * Ha Thach (tinyusb.org) - * Uwe Bonnes (bon@elektron.ikp.physik.tu-darmstadt.de - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "stm32h7xx_hal.h" -#include "bsp/board.h" -#include "board.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ - -// Despite being call USB2_OTG -// OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port -void OTG_FS_IRQHandler(void) -{ - tud_int_handler(0); -} - -// Despite being call USB2_OTG -// OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port -void OTG_HS_IRQHandler(void) -{ - tud_int_handler(1); -} - - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -UART_HandleTypeDef UartHandle; - -void board_init(void) -{ - board_stm32h7_clock_init(); - - // Enable All GPIOs clocks - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOB_CLK_ENABLE(); // USB ULPI NXT - __HAL_RCC_GPIOC_CLK_ENABLE(); // USB ULPI NXT - __HAL_RCC_GPIOD_CLK_ENABLE(); - __HAL_RCC_GPIOE_CLK_ENABLE(); - __HAL_RCC_GPIOE_CLK_ENABLE(); - __HAL_RCC_GPIOG_CLK_ENABLE(); - __HAL_RCC_GPIOH_CLK_ENABLE(); // USB ULPI NXT - __HAL_RCC_GPIOI_CLK_ENABLE(); // USB ULPI NXT - __HAL_RCC_GPIOJ_CLK_ENABLE(); - - // Enable UART Clock - UART_CLK_EN(); - - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); - NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - GPIO_InitTypeDef GPIO_InitStruct; - - // LED - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - // Uart - GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Alternate = UART_GPIO_AF; - HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); - - UartHandle.Instance = UART_DEV; - UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; - UartHandle.Init.WordLength = UART_WORDLENGTH_8B; - UartHandle.Init.StopBits = UART_STOPBITS_1; - UartHandle.Init.Parity = UART_PARITY_NONE; - UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; - UartHandle.Init.Mode = UART_MODE_TX_RX; - UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; - HAL_UART_Init(&UartHandle); - -#if BOARD_DEVICE_RHPORT_NUM == 0 - // Despite being call USB2_OTG - // OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port - // PA9 VUSB, PA10 ID, PA11 DM, PA12 DP - - /* Configure DM DP Pins */ - GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* This for ID line debug */ - GPIO_InitStruct.Pin = GPIO_PIN_10; - GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // https://community.st.com/s/question/0D50X00009XkYZLSA3/stm32h7-nucleo-usb-fs-cdc - // TODO: Board init actually works fine without this line. - HAL_PWREx_EnableUSBVoltageDetector(); - __HAL_RCC_USB2_OTG_FS_CLK_ENABLE(); - -#if OTG_FS_VBUS_SENSE - /* Configure VBUS Pin */ - GPIO_InitStruct.Pin = GPIO_PIN_9; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; -#else - // Disable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; -#endif // vbus sense - -#elif BOARD_DEVICE_RHPORT_NUM == 1 - // Despite being call USB2_OTG - // OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port - - /* CLK */ - GPIO_InitStruct.Pin = GPIO_PIN_5; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* D0 */ - GPIO_InitStruct.Pin = GPIO_PIN_3; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* D1 D2 D3 D4 D5 D6 D7 */ - GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_5 | GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); - - /* STP */ - GPIO_InitStruct.Pin = GPIO_PIN_0; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); - - /* NXT */ - GPIO_InitStruct.Pin = GPIO_PIN_4; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOH, &GPIO_InitStruct); - - /* DIR */ - GPIO_InitStruct.Pin = GPIO_PIN_11; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOI, &GPIO_InitStruct); - - // Enable USB HS & ULPI Clocks - __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE(); - __HAL_RCC_USB1_OTG_HS_CLK_ENABLE(); - -#if OTG_HS_VBUS_SENSE - #error OTG HS VBUS Sense enabled is not implemented -#else - // No VBUS sense - USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; -#endif - - // Force device mode - USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD; - USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; - - HAL_PWREx_EnableUSBVoltageDetector(); -#endif // rhport = 1 - -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return (BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN)) ? 1 : 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff); - return len; -} - - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - asm("bkpt"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/tinyusb/hw/bsp/stm32h7/family.mk b/tinyusb/hw/bsp/stm32h7/family.mk deleted file mode 100755 index e35e7561..00000000 --- a/tinyusb/hw/bsp/stm32h7/family.mk +++ /dev/null @@ -1,51 +0,0 @@ -UF2_FAMILY_ID = 0x6db66082 -ST_FAMILY = h7 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -include $(TOP)/$(BOARD_PATH)/board.mk - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m7 \ - -mfloat-abi=hard \ - -mfpu=fpv5-d16 \ - -nostdlib -nostartfiles \ - -DCFG_TUSB_MCU=OPT_MCU_STM32H7 \ - -DBOARD_DEVICE_RHPORT_NUM=$(PORT) - -ifeq ($(PORT), 1) - CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED - $(info "PORT1 High Speed") -else - $(info "PORT0 Full Speed") -endif - -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align - -# All source paths should be relative to the top level. -SRC_C += \ - src/portable/st/synopsys/dcd_synopsys.c \ - $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM7/r0p1 - diff --git a/tinyusb/hw/bsp/stm32h7/stm32h7xx_hal_conf.h b/tinyusb/hw/bsp/stm32h7/stm32h7xx_hal_conf.h deleted file mode 100755 index a7cc6d82..00000000 --- a/tinyusb/hw/bsp/stm32h7/stm32h7xx_hal_conf.h +++ /dev/null @@ -1,483 +0,0 @@ -/** - ****************************************************************************** - * @file stm32h7xx_hal_conf_template.h - * @brief HAL configuration template file. - * This file should be copied to the application folder and renamed - * to stm32h7xx_hal_conf.h. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32H7xx_HAL_CONF_H -#define __STM32H7xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -#define HAL_ADC_MODULE_ENABLED -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_COMP_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_FDCAN_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_HASH_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_HRTIM_MODULE_ENABLED */ -/* #define HAL_HSEM_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_JPEG_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_MDIOS_MODULE_ENABLED */ -/* #define HAL_MDMA_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_OPAMP_MODULE_ENABLED */ -/* #define HAL_PCD_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_RAMECC_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -#define HAL_SPI_MODULE_ENABLED -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SWPMI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ - -/* ########################## Oscillator Values adaptation ####################*/ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) -//#define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ -#error HSE_VALUE is not defined -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal oscillator (CSI) default value. - * This value is the default CSI value after Reset. - */ -#if !defined (CSI_VALUE) - #define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ -#endif /* CSI_VALUE */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief External Low Speed oscillator (LSE) value. - * This value is used by the UART, RTC HAL module to compute the system frequency - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/ -#endif /* LSE_VALUE */ - - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)32000) /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature.*/ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External clock in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0x0F) /*!< tick interrupt priority */ -#define USE_RTOS 0 -#define USE_SD_TRANSCEIVER 1U /*!< use uSD Transceiver */ -#define USE_SPI_CRC 1U /*!< use CRC in SPI */ - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################### Ethernet Configuration ######################### */ -#define ETH_TX_DESC_CNT 4 /* number of Ethernet Tx DMA descriptors */ -#define ETH_RX_DESC_CNT 4 /* number of Ethernet Rx DMA descriptors */ - -#define ETH_MAC_ADDR0 ((uint8_t)0x02) -#define ETH_MAC_ADDR1 ((uint8_t)0x00) -#define ETH_MAC_ADDR2 ((uint8_t)0x00) -#define ETH_MAC_ADDR3 ((uint8_t)0x00) -#define ETH_MAC_ADDR4 ((uint8_t)0x00) -#define ETH_MAC_ADDR5 ((uint8_t)0x00) - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1 */ - - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32h7xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32h7xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32h7xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_MDMA_MODULE_ENABLED - #include "stm32h7xx_hal_mdma.h" -#endif /* HAL_MDMA_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32h7xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32h7xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32h7xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32h7xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32h7xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32h7xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32h7xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32h7xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32h7xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_FDCAN_MODULE_ENABLED - #include "stm32h7xx_hal_fdcan.h" -#endif /* HAL_FDCAN_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32h7xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_COMP_MODULE_ENABLED - #include "stm32h7xx_hal_comp.h" -#endif /* HAL_COMP_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32h7xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32h7xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32h7xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32h7xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_HRTIM_MODULE_ENABLED - #include "stm32h7xx_hal_hrtim.h" -#endif /* HAL_HRTIM_MODULE_ENABLED */ - -#ifdef HAL_HSEM_MODULE_ENABLED - #include "stm32h7xx_hal_hsem.h" -#endif /* HAL_HSEM_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32h7xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32h7xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32h7xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32h7xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32h7xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32h7xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_JPEG_MODULE_ENABLED - #include "stm32h7xx_hal_jpeg.h" -#endif /* HAL_JPEG_MODULE_ENABLED */ - -#ifdef HAL_MDIOS_MODULE_ENABLED - #include "stm32h7xx_hal_mdios.h" -#endif /* HAL_MDIOS_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32h7xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED -#include "stm32h7xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED -#include "stm32h7xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_OPAMP_MODULE_ENABLED -#include "stm32h7xx_hal_opamp.h" -#endif /* HAL_OPAMP_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32h7xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32h7xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_RAMECC_MODULE_ENABLED - #include "stm32h7xx_hal_ramecc.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32h7xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32h7xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32h7xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32h7xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32h7xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32h7xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32h7xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_SWPMI_MODULE_ENABLED - #include "stm32h7xx_hal_swpmi.h" -#endif /* HAL_SWPMI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32h7xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32h7xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32h7xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32h7xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32h7xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32h7xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32h7xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32h7xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32h7xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t *file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32H7xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld b/tinyusb/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld deleted file mode 100755 index 787418e0..00000000 --- a/tinyusb/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld +++ /dev/null @@ -1,169 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32L053C8Tx Device with -** 64KByte FLASH, 8KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20002000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x200; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 8K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/tinyusb/hw/bsp/stm32l0538disco/board.mk b/tinyusb/hw/bsp/stm32l0538disco/board.mk deleted file mode 100755 index c46887f1..00000000 --- a/tinyusb/hw/bsp/stm32l0538disco/board.mk +++ /dev/null @@ -1,53 +0,0 @@ -ST_FAMILY = l0 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ - -mfloat-abi=soft \ - -nostdlib -nostartfiles \ - -DSTM32L053xx \ - -DCFG_EXAMPLE_MSC_READONLY \ - -DCFG_TUSB_MCU=OPT_MCU_STM32L0 - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=maybe-uninitialized - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/STM32L053C8Tx_FLASH.ld - -SRC_C += \ - src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ - $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c - -SRC_S += \ - $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l053xx.s - -INC += \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc \ - $(TOP)/hw/bsp/$(BOARD) - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = STM32L053R8 - -# Path to STM32 Cube Programmer CLI, should be added into system path -STM32Prog = STM32_Programmer_CLI - -# flash target using on-board stlink -flash: $(BUILD)/$(PROJECT).elf - $(STM32Prog) --connect port=swd --write $< --go diff --git a/tinyusb/hw/bsp/stm32l0538disco/stm32l0538disco.c b/tinyusb/hw/bsp/stm32l0538disco/stm32l0538disco.c deleted file mode 100755 index f0f1d028..00000000 --- a/tinyusb/hw/bsp/stm32l0538disco/stm32l0538disco.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../board.h" -#include "stm32l0xx_hal.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT GPIOA -#define LED_PIN GPIO_PIN_5 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - -/** - * @brief System Clock Configuration - * The system Clock is configured as follow: - * HSI48 used as USB clock source - * - System Clock source = HSI - * - HSI Frequency(Hz) = 16000000 - * - SYSCLK(Hz) = 16000000 - * - HCLK(Hz) = 16000000 - * - AHB Prescaler = 1 - * - APB1 Prescaler = 1 - * - APB2 Prescaler = 1 - * - Flash Latency(WS) = 0 - * - Main regulator output voltage = Scale1 mode - * @param None - * @retval None - */ -static void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; - static RCC_CRSInitTypeDef RCC_CRSInitStruct; - - /* Enable HSI Oscillator to be used as System clock source - Enable HSI48 Oscillator to be used as USB clock source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48; - RCC_OscInitStruct.HSIState = RCC_HSI_ON; - RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Select HSI48 as USB clock source */ - PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; - PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; - HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); - - /* Select HSI as system clock source and configure the HCLK, PCLK1 and PCLK2 - clock dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0); - - /*Configure the clock recovery system (CRS)**********************************/ - - /*Enable CRS Clock*/ - __HAL_RCC_CRS_CLK_ENABLE(); - - /* Default Synchro Signal division factor (not divided) */ - RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1; - /* Set the SYNCSRC[1:0] bits according to CRS_Source value */ - RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB; - /* HSI48 is synchronized with USB SOF at 1KHz rate */ - RCC_CRSInitStruct.ReloadValue = __HAL_RCC_CRS_RELOADVALUE_CALCULATE(48000000, 1000); - RCC_CRSInitStruct.ErrorLimitValue = RCC_CRS_ERRORLIMIT_DEFAULT; - /* Set the TRIM[5:0] to the default value*/ - RCC_CRSInitStruct.HSI48CalibrationValue = 0x20; - /* Start automatic synchronization */ - HAL_RCCEx_CRSConfig (&RCC_CRSInitStruct); -} - -void board_init(void) -{ - SystemClock_Config(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - GPIO_InitTypeDef GPIO_InitStruct; - - // LED - __HAL_RCC_GPIOA_CLK_ENABLE(); - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - board_led_write(false); - - // Button - //__HAL_RCC_GPIOA_CLK_ENABLE(); - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_PULLDOWN; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - // USB - /* Configure DM DP Pins */ - __HAL_RCC_GPIOA_CLK_ENABLE(); - GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Enable USB FS Clock */ - __HAL_RCC_USB_CLK_ENABLE(); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - asm("bkpt"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/tinyusb/hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h b/tinyusb/hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h deleted file mode 100755 index 773b74e2..00000000 --- a/tinyusb/hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h +++ /dev/null @@ -1,331 +0,0 @@ -/** - ****************************************************************************** - * @file stm32l0xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration file. - ****************************************************************************** - * - * Copyright (c) 2016 STMicroelectronics International N.V. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted, provided that the following conditions are met: - * - * 1. Redistribution of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of other - * contributors to this software may be used to endorse or promote products - * derived from this software without specific written permission. - * 4. This software, including modifications and/or derivative works of this - * software, must execute solely and exclusively on microcontroller or - * microprocessor devices manufactured by or for STMicroelectronics. - * 5. Redistribution and use of this software other than as permitted under - * this license is void and will automatically terminate your rights under - * this license. - * - * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A - * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY - * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT - * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, - * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32L0xx_HAL_CONF_H -#define __STM32L0xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -// #define HAL_ADC_MODULE_ENABLED -/* #define HAL_COMP_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_FIREWALL_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LCD_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED -//#define HAL_RNG_MODULE_ENABLED -/* #define HAL_RTC_MODULE_ENABLED */ -//#define HAL_SPI_MODULE_ENABLED -/* #define HAL_TIM_MODULE_ENABLED */ -/* #define HAL_TSC_MODULE_ENABLED */ -/* #define HAL_UART_MODULE_ENABLED */ -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -//#define HAL_PCD_MODULE_ENABLED -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_PCD_MODULE_ENABLED */ - - -/* ########################## Oscillator Values adaptation ####################*/ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal Multiple Speed oscillator (MSI) default value. - * This value is the default MSI range value after Reset. - */ -#if !defined (MSI_VALUE) - #define MSI_VALUE ((uint32_t)2097152U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* MSI_VALUE */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal High Speed oscillator for USB (HSI48) value. - */ -#if !defined (HSI48_VALUE) -#define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz. - The real value may vary depending on the variations - in voltage and temperature. */ -#endif /* HSI48_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)37000U) /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature.*/ -/** - * @brief External Low Speed oscillator (LSE) value. - * This value is used by the UART, RTC HAL module to compute the system frequency - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/ -#endif /* LSE_VALUE */ - -/** - * @brief Time out for LSE start up value in ms. - */ -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define PREREAD_ENABLE 1U -#define BUFFER_CACHE_DISABLE 0U - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1 */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver - * Activated: CRC code is present inside driver - * Deactivated: CRC code cleaned from driver - */ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32l0xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32l0xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32l0xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32l0xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32l0xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_COMP_MODULE_ENABLED - #include "stm32l0xx_hal_comp.h" -#endif /* HAL_COMP_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32l0xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32l0xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32l0xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FIREWALL_MODULE_ENABLED - #include "stm32l0xx_hal_firewall.h" -#endif /* HAL_FIREWALL_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32l0xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32l0xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32l0xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32l0xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LCD_MODULE_ENABLED - #include "stm32l0xx_hal_lcd.h" -#endif /* HAL_LCD_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED -#include "stm32l0xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32l0xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32l0xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32l0xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32l0xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32l0xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_TSC_MODULE_ENABLED - #include "stm32l0xx_hal_tsc.h" -#endif /* HAL_TSC_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32l0xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32l0xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32l0xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32l0xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32l0xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32l0xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32l0xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t *file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32L0xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32l476disco/STM32L476VGTx_FLASH.ld b/tinyusb/hw/bsp/stm32l476disco/STM32L476VGTx_FLASH.ld deleted file mode 100755 index 98f468ac..00000000 --- a/tinyusb/hw/bsp/stm32l476disco/STM32L476VGTx_FLASH.ld +++ /dev/null @@ -1,183 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32L476VGTx Device with -** 1024KByte FLASH, 96KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20018000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x500; /* required amount of heap */ -_Min_Stack_Size = 0x1000; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 96K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(8); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(8); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(8); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(8); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(8); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(8); - } >FLASH - - .ARM.extab : - { - . = ALIGN(8); - *(.ARM.extab* .gnu.linkonce.armextab.*) - . = ALIGN(8); - } >FLASH - .ARM : { - . = ALIGN(8); - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - . = ALIGN(8); - } >FLASH - - .preinit_array : - { - . = ALIGN(8); - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - . = ALIGN(8); - } >FLASH - - .init_array : - { - . = ALIGN(8); - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - . = ALIGN(8); - } >FLASH - .fini_array : - { - . = ALIGN(8); - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - . = ALIGN(8); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(8); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(8); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/tinyusb/hw/bsp/stm32l476disco/board.mk b/tinyusb/hw/bsp/stm32l476disco/board.mk deleted file mode 100755 index 28824efd..00000000 --- a/tinyusb/hw/bsp/stm32l476disco/board.mk +++ /dev/null @@ -1,56 +0,0 @@ -ST_FAMILY = l4 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib -nostartfiles \ - -DSTM32L476xx \ - -DCFG_TUSB_MCU=OPT_MCU_STM32L4 - -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/STM32L476VGTx_FLASH.ld - -SRC_C += \ - src/portable/st/synopsys/dcd_synopsys.c \ - $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c - -SRC_S += \ - $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l476xx.s - -INC += \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc \ - $(TOP)/hw/bsp/$(BOARD) - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = stm32l476vg - -# Path to STM32 Cube Programmer CLI, should be added into system path -STM32Prog = STM32_Programmer_CLI - -# flash target using on-board stlink -flash: $(BUILD)/$(PROJECT).elf - $(STM32Prog) --connect port=swd --write $< --go diff --git a/tinyusb/hw/bsp/stm32l476disco/stm32l476disco.c b/tinyusb/hw/bsp/stm32l476disco/stm32l476disco.c deleted file mode 100755 index b1884668..00000000 --- a/tinyusb/hw/bsp/stm32l476disco/stm32l476disco.c +++ /dev/null @@ -1,242 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../board.h" - -#include "stm32l4xx_hal.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void OTG_FS_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_2 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - - -// enable all LED, Button, Uart, USB clock -static void all_rcc_clk_enable(void) -{ - __HAL_RCC_GPIOA_CLK_ENABLE(); // USB D+, D-, Button - __HAL_RCC_GPIOB_CLK_ENABLE(); // LED - __HAL_RCC_GPIOC_CLK_ENABLE(); // VBUS pin -} - - -/** - * @brief System Clock Configuration - * The system Clock is configured as follow : - * - * If define USB_USE_LSE_MSI_CLOCK enabled: - * System Clock source = PLL (MSI) - * SYSCLK(Hz) = 80000000 - * HCLK(Hz) = 80000000 - * AHB Prescaler = 1 - * APB1 Prescaler = 1 - * APB2 Prescaler = 2 - * MSI Frequency(Hz) = 4800000 - * LSE Frequency(Hz) = 32768 - * PLL_M = 6 - * PLL_N = 40 - * PLL_P = 7 - * PLL_Q = 4 - * PLL_R = 4 - * Flash Latency(WS) = 4 - * @param None - * @retval None - */ -static void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; - - /* Enable the LSE Oscillator */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE; - RCC_OscInitStruct.LSEState = RCC_LSE_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Enable the CSS interrupt in case LSE signal is corrupted or not present */ - HAL_RCCEx_DisableLSECSS(); - - /* Set tick interrupt priority, default HAL value is intentionally invalid - and that prevents PLL initialization in HAL_RCC_OscConfig() */ - HAL_InitTick((1UL << __NVIC_PRIO_BITS) - 1UL); - - /* Enable MSI Oscillator and activate PLL with MSI as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI; - RCC_OscInitStruct.MSIState = RCC_MSI_ON; - RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT; - RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_11; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_MSI; - RCC_OscInitStruct.PLL.PLLM = 6; - RCC_OscInitStruct.PLL.PLLN = 40; - RCC_OscInitStruct.PLL.PLLP = 7; - RCC_OscInitStruct.PLL.PLLQ = 4; - RCC_OscInitStruct.PLL.PLLR = 4; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Enable MSI Auto-calibration through LSE */ - HAL_RCCEx_EnableMSIPLLMode(); - - /* Select MSI output as USB clock source */ - PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; - PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_MSI; - HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); -} - -void board_init(void) -{ - SystemClock_Config(); - all_rcc_clk_enable(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable USB power on Pwrctrl CR2 register */ - HAL_PWREx_EnableVddUSB(); - - GPIO_InitTypeDef GPIO_InitStruct; - - // LED - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FAST; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - board_led_write(false); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_PULLDOWN; - GPIO_InitStruct.Speed = GPIO_SPEED_FAST; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - // USB - /* Configure DM DP Pins */ - GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Configure VBUS Pin */ - GPIO_InitStruct.Pin = GPIO_PIN_11; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); - - /* Enable USB FS Clock */ - __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); - - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; -} - -//--------------------------------------------------------------------+ -// board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - asm("bkpt"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/tinyusb/hw/bsp/stm32l476disco/stm32l4xx_hal_conf.h b/tinyusb/hw/bsp/stm32l476disco/stm32l4xx_hal_conf.h deleted file mode 100755 index 312f86da..00000000 --- a/tinyusb/hw/bsp/stm32l476disco/stm32l4xx_hal_conf.h +++ /dev/null @@ -1,420 +0,0 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration template file. - * This file should be copied to the application folder and renamed - * to stm32l4xx_hal_conf.h. - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32L4xx_HAL_CONF_H -#define __STM32L4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_COMP_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_FIREWALL_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -// #define HAL_NOR_MODULE_ENABLED -// #define HAL_SRAM_MODULE_ENABLED -/* #define HAL_HCD_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -//#define HAL_I2C_MODULE_ENABLED -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -//#define HAL_LCD_MODULE_ENABLED -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_OPAMP_MODULE_ENABLED */ -//#define HAL_PCD_MODULE_ENABLED -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -//#define HAL_SAI_MODULE_ENABLED -//#define HAL_SD_MODULE_ENABLED -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_SWPMI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -/* #define HAL_TSC_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ - - -/* ########################## Oscillator Values adaptation ####################*/ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal Multiple Speed oscillator (MSI) default value. - * This value is the default MSI range value after Reset. - */ -#if !defined (MSI_VALUE) - #define MSI_VALUE 4000000U /*!< Value of the Internal oscillator in Hz*/ -#endif /* MSI_VALUE */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. - * This internal oscillator is mainly dedicated to provide a high precision clock to - * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. - * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency - * which is subject to manufacturing process variations. - */ -#if !defined (HSI48_VALUE) - #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. - The real value my vary depending on manufacturing process variations.*/ -#endif /* HSI48_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature.*/ -/** - * @brief External Low Speed oscillator (LSE) value. - * This value is used by the UART, RTC HAL module to compute the system frequency - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for SAI1 peripheral - * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source - * frequency. - */ -#if !defined (EXTERNAL_SAI1_CLOCK_VALUE) - #define EXTERNAL_SAI1_CLOCK_VALUE 48000U /*!< Value of the SAI1 External clock source in Hz*/ -#endif /* EXTERNAL_SAI1_CLOCK_VALUE */ - -/** - * @brief External clock source for SAI2 peripheral - * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source - * frequency. - */ -#if !defined (EXTERNAL_SAI2_CLOCK_VALUE) - #define EXTERNAL_SAI2_CLOCK_VALUE 48000U /*!< Value of the SAI2 External clock source in Hz*/ -#endif /* EXTERNAL_SAI2_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE 3300U /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY 0U /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 0U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver - * Activated: CRC code is present inside driver - * Deactivated: CRC code cleaned from driver - */ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32l4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32l4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32l4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32l4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32l4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32l4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32l4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "Legacy/stm32l4xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_COMP_MODULE_ENABLED - #include "stm32l4xx_hal_comp.h" -#endif /* HAL_COMP_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32l4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32l4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32l4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FIREWALL_MODULE_ENABLED - #include "stm32l4xx_hal_firewall.h" -#endif /* HAL_FIREWALL_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32l4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32l4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32l4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32l4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32l4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32l4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LCD_MODULE_ENABLED - #include "stm32l4xx_hal_lcd.h" -#endif /* HAL_LCD_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED -#include "stm32l4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_OPAMP_MODULE_ENABLED -#include "stm32l4xx_hal_opamp.h" -#endif /* HAL_OPAMP_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32l4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32l4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32l4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32l4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32l4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32l4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32l4xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32l4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_SWPMI_MODULE_ENABLED - #include "stm32l4xx_hal_swpmi.h" -#endif /* HAL_SWPMI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32l4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_TSC_MODULE_ENABLED - #include "stm32l4xx_hal_tsc.h" -#endif /* HAL_TSC_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32l4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32l4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32l4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32l4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32l4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32l4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32l4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t *file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32L4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld b/tinyusb/hw/bsp/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld deleted file mode 100755 index f93a1604..00000000 --- a/tinyusb/hw/bsp/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld +++ /dev/null @@ -1,167 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32L4RxI Device with -** 2048KByte FLASH, 640KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x200a0000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x460; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 640K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 2048K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/tinyusb/hw/bsp/stm32l4r5nucleo/board.mk b/tinyusb/hw/bsp/stm32l4r5nucleo/board.mk deleted file mode 100755 index 12a291d0..00000000 --- a/tinyusb/hw/bsp/stm32l4r5nucleo/board.mk +++ /dev/null @@ -1,50 +0,0 @@ -ST_FAMILY = l4 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib -nostartfiles \ - -DHSE_VALUE=8000000 \ - -DSTM32L4R5xx \ - -DCFG_TUSB_MCU=OPT_MCU_STM32L4 - -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/STM32L4RXxI_FLASH.ld - -SRC_C += \ - src/portable/st/synopsys/dcd_synopsys.c \ - $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c - -SRC_S += \ - $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l4r5xx.s - -INC += \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc \ - $(TOP)/hw/bsp/$(BOARD) - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM4F - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32l4r5nucleo/stm32l4r5nucleo.c b/tinyusb/hw/bsp/stm32l4r5nucleo/stm32l4r5nucleo.c deleted file mode 100755 index bab66b55..00000000 --- a/tinyusb/hw/bsp/stm32l4r5nucleo/stm32l4r5nucleo.c +++ /dev/null @@ -1,287 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 William D. Jones (thor0505@comcast.net), - * Ha Thach (tinyusb.org) - * Uwe Bonnes (bon@elektron.ikp.physik.tu-darmstadt.de) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../board.h" - -#include "stm32l4xx_hal.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void OTG_FS_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_14 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - -#define UARTx LPUART1 -#define UART_GPIO_PORT GPIOG -#define UART_GPIO_AF GPIO_AF8_LPUART1 -#define UART_TX_PIN GPIO_PIN_7 -#define UART_RX_PIN GPIO_PIN_8 - -UART_HandleTypeDef UartHandle; - -// enable all LED, Button, Uart, USB clock -static void all_rcc_clk_enable(void) -{ - __HAL_RCC_GPIOA_CLK_ENABLE(); // USB D+, D- - __HAL_RCC_GPIOB_CLK_ENABLE(); // LED - __HAL_RCC_GPIOC_CLK_ENABLE(); // Button - __HAL_RCC_GPIOG_CLK_ENABLE(); // Uart TX, RX - __HAL_RCC_LPUART1_CLK_ENABLE(); // LPUart1 module -} - -/** - * @brief System Clock Configuration - * The system Clock is configured as follow : - * System Clock source = PLL (MSI) - * SYSCLK(Hz) = 120000000 - * HCLK(Hz) = 120000000 - * AHB Prescaler = 1 - * APB1 Prescaler = 1 - * APB2 Prescaler = 1 - * MSI Frequency(Hz) = 48000000 - * PLL_M = 12 - * PLL_N = 60 - * PLL_P = 2 - * PLL_Q = 2 - * VDD(V) = 3.3 - * Main regulator output voltage = Scale1 mode - * Flash Latency(WS) = 5 - * The USB clock configuration from PLLSAI: - * PLLSAIP = 8 FIXME - * PLLSAIN = 384 FIXME - * PLLSAIQ = 7 FIXME - * @param None - * @retval None - */ -void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; - - /* Activate PLL with MSI , stabilizied via PLL by LSE */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_MSI; - RCC_OscInitStruct.MSIState = RCC_MSI_ON; - RCC_OscInitStruct.LSEState = RCC_LSE_ON; - RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_11; - RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_MSI; - RCC_OscInitStruct.PLL.PLLM = 12; - RCC_OscInitStruct.PLL.PLLN = 60; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = 2; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Enable MSI Auto-calibration through LSE */ - HAL_RCCEx_EnableMSIPLLMode(); - - /* Select MSI output as USB clock source */ - PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; - PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_MSI; - HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); - - /* Select MSI output as USB clock source */ - PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_LPUART1; - PeriphClkInitStruct.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_PCLK1; - HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - // Avoid overshoot and start with HCLK 60 MHz - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV2; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3); - - /* AHB prescaler divider at 1 as second step */ - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); -} - -void board_init(void) -{ - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - /* Enable voltage range 1 boost mode for frequency above 80 Mhz */ - HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1_BOOST); - - /* Set tick interrupt priority, default HAL value is intentionally invalid - and that prevents PLL initialization in HAL_RCC_OscConfig() */ - - HAL_InitTick((1UL << __NVIC_PRIO_BITS) - 1UL); - - SystemClock_Config(); - all_rcc_clk_enable(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - /* Enable USB power on Pwrctrl CR2 register */ - HAL_PWREx_EnableVddUSB(); - - GPIO_InitTypeDef GPIO_InitStruct; - - // LED - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - // IOSV bit MUST be set to access GPIO port G[2:15] */ - __HAL_RCC_PWR_CLK_ENABLE(); - HAL_PWREx_EnableVddIO2(); - - // Uart - GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Alternate = UART_GPIO_AF; - HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); - - UartHandle.Instance = UARTx; - UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; - UartHandle.Init.WordLength = UART_WORDLENGTH_8B; - UartHandle.Init.StopBits = UART_STOPBITS_1; - UartHandle.Init.Parity = UART_PARITY_NONE; - UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; - UartHandle.Init.Mode = UART_MODE_TX_RX; - UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; - UartHandle.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; - UartHandle.Init.ClockPrescaler = UART_PRESCALER_DIV1; - UartHandle.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; - - HAL_UART_Init(&UartHandle); - - /* Configure USB FS GPIOs */ - /* Configure DM DP Pins */ - GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Configure VBUS Pin */ - GPIO_InitStruct.Pin = GPIO_PIN_9; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Configure ID pin */ - GPIO_InitStruct.Pin = GPIO_PIN_10; - GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Enable USB FS Clocks */ - __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); - - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff); - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - asm("bkpt"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/tinyusb/hw/bsp/stm32l4r5nucleo/stm32l4xx_hal_conf.h b/tinyusb/hw/bsp/stm32l4r5nucleo/stm32l4xx_hal_conf.h deleted file mode 100755 index 470ef129..00000000 --- a/tinyusb/hw/bsp/stm32l4r5nucleo/stm32l4xx_hal_conf.h +++ /dev/null @@ -1,419 +0,0 @@ -/** - ****************************************************************************** - * @file stm32l4xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration template file. - * This file should be copied to the application folder and renamed - * to stm32l4xx_hal_conf.h. - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32L4xx_HAL_CONF_H -#define __STM32L4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_COMP_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_FIREWALL_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -// #define HAL_NOR_MODULE_ENABLED -// #define HAL_SRAM_MODULE_ENABLED -/* #define HAL_HCD_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -//#define HAL_I2C_MODULE_ENABLED -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -//#define HAL_LCD_MODULE_ENABLED -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_OPAMP_MODULE_ENABLED */ -//#define HAL_PCD_MODULE_ENABLED -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -//#define HAL_SAI_MODULE_ENABLED -//#define HAL_SD_MODULE_ENABLED -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_SWPMI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -/* #define HAL_TSC_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ - - -/* ########################## Oscillator Values adaptation ####################*/ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal Multiple Speed oscillator (MSI) default value. - * This value is the default MSI range value after Reset. - */ -#if !defined (MSI_VALUE) - #define MSI_VALUE 4000000U /*!< Value of the Internal oscillator in Hz*/ -#endif /* MSI_VALUE */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. - * This internal oscillator is mainly dedicated to provide a high precision clock to - * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. - * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency - * which is subject to manufacturing process variations. - */ -#if !defined (HSI48_VALUE) - #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. - The real value my vary depending on manufacturing process variations.*/ -#endif /* HSI48_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature.*/ -/** - * @brief External Low Speed oscillator (LSE) value. - * This value is used by the UART, RTC HAL module to compute the system frequency - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for SAI1 peripheral - * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source - * frequency. - */ -#if !defined (EXTERNAL_SAI1_CLOCK_VALUE) - #define EXTERNAL_SAI1_CLOCK_VALUE 48000U /*!< Value of the SAI1 External clock source in Hz*/ -#endif /* EXTERNAL_SAI1_CLOCK_VALUE */ - -/** - * @brief External clock source for SAI2 peripheral - * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source - * frequency. - */ -#if !defined (EXTERNAL_SAI2_CLOCK_VALUE) - #define EXTERNAL_SAI2_CLOCK_VALUE 48000U /*!< Value of the SAI2 External clock source in Hz*/ -#endif /* EXTERNAL_SAI2_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE 3300U /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY 0U /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 0U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver - * Activated: CRC code is present inside driver - * Deactivated: CRC code cleaned from driver - */ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32l4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32l4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32l4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32l4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32l4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32l4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32l4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "Legacy/stm32l4xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_COMP_MODULE_ENABLED - #include "stm32l4xx_hal_comp.h" -#endif /* HAL_COMP_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32l4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32l4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32l4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FIREWALL_MODULE_ENABLED - #include "stm32l4xx_hal_firewall.h" -#endif /* HAL_FIREWALL_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32l4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32l4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32l4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32l4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32l4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32l4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LCD_MODULE_ENABLED - #include "stm32l4xx_hal_lcd.h" -#endif /* HAL_LCD_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED -#include "stm32l4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_OPAMP_MODULE_ENABLED -#include "stm32l4xx_hal_opamp.h" -#endif /* HAL_OPAMP_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32l4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32l4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32l4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32l4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32l4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32l4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32l4xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32l4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_SWPMI_MODULE_ENABLED - #include "stm32l4xx_hal_swpmi.h" -#endif /* HAL_SWPMI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32l4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_TSC_MODULE_ENABLED - #include "stm32l4xx_hal_tsc.h" -#endif /* HAL_TSC_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32l4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32l4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32l4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32l4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32l4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32l4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32l4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t *file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32L4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tinyusb/hw/bsp/waveshare_openh743i/STM32H743IITX_FLASH.ld b/tinyusb/hw/bsp/waveshare_openh743i/STM32H743IITX_FLASH.ld deleted file mode 100755 index 73d2dedb..00000000 --- a/tinyusb/hw/bsp/waveshare_openh743i/STM32H743IITX_FLASH.ld +++ /dev/null @@ -1,175 +0,0 @@ -/* -****************************************************************************** -** -** File : LinkerScript.ld -** -** Author : STM32CubeIDE -** -** Abstract : Linker script for STM32H7 series -** 2048Kbytes FLASH and 192Kbytes RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -***************************************************************************** -** @attention -** -** Copyright (c) 2019 STMicroelectronics. -** All rights reserved. -** -** This software component is licensed by ST under BSD 3-Clause license, -** the "License"; You may not use this file except in compliance with the -** License. You may obtain a copy of the License at: -** opensource.org/licenses/BSD-3-Clause -** -**************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20020000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x2000 ; /* required amount of heap */ -_Min_Stack_Size = 0x2000 ; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 2048K - RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K - RAM_D1 (xrw) : ORIGIN = 0x24000000, LENGTH = 512K - RAM_D2 (xrw) : ORIGIN = 0x30000000, LENGTH = 288K - RAM_D3 (xrw) : ORIGIN = 0x38000000, LENGTH = 64K - ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - *(.RamFunc) /* .RamFunc sections */ - *(.RamFunc*) /* .RamFunc* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/tinyusb/hw/bsp/waveshare_openh743i/board.c b/tinyusb/hw/bsp/waveshare_openh743i/board.c deleted file mode 100755 index 4468c066..00000000 --- a/tinyusb/hw/bsp/waveshare_openh743i/board.c +++ /dev/null @@ -1,495 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 - * Benjamin Evans - * William D. Jones (thor0505@comcast.net), - * Ha Thach (tinyusb.org) - * Uwe Bonnes (bon@elektron.ikp.physik.tu-darmstadt.de - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "stm32h7xx_hal.h" -#include "stm32h7xx_hal_tim.h" -#include "bsp/board.h" - - -/* ** BOARD SETUP ** - * - * NOTE: This board has bad signal integrity so you may experience some problems. - * This setup assumes you have an openh743i-c Core and breakout board. For the HS - * examples it also assumes you have a waveshare USB3300 breakout board plugged - * into the ULPI PMOD header on the openh743i-c. - * - * UART Debugging: - * Due to pin conflicts in the HS configuration, this BSP uses USART3 (PD8, PD9). - * As such, you won't be able to use the UART to USB converter on board and will - * require an external UART to USB converter. You could use the waveshare FT232 - * USB UART Board (micro) but any 3.3V UART to USB converter will be fine. - * - * Fullspeed: - * If VBUS sense is enabled, ensure the PA9-VBUS jumper is connected on the core - * board. Connect the PB6 jumper for the LED and the Wakeup - PA0 jumper for the - * button. Connect the USB cable to the USB connector on the core board. - * - * High Speed: - * Remove all jumpers from the openh743i-c (especially the USART1 jumpers as the - * pins conflict). Connect the PB6 jumper for the LED and the Wakeup - PA0 - * jumper for the button. - * - * The reset pin on the ULPI PMOD port is not connected to the MCU. You'll need - * to solder a wire from the RST pin on the USB3300 to a pin of your choosing on - * the openh743i-c board (this example assumes you've used PD14 as specified with - * the ULPI_RST_PORT and ULPI_RST_PIN defines below). - * - * Preferably power the board using the external 5VDC jack. Connect the USB cable - * to the USB connector on the ULPI board. Adjust delays in this file as required. - * - * If you're having trouble, ask a question on the tinyUSB Github Discussion boards. - * - * Have fun! - * -*/ - -//--------------------------------------------------------------------+ -// BOARD DEFINES -//--------------------------------------------------------------------+ - -//LED Pin -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_6 -#define LED_STATE_ON 1 - -//ULPI PHY reset pin -#define ULPI_RST_PORT GPIOD -#define ULPI_RST_PIN GPIO_PIN_14 - -// Tamper push-button -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - -// Need external UART to USB converter as USART1 pins conflict with HS ULPI pins -#define UART_DEV USART3 -#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define UART_GPIO_PORT GPIOD -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_8 -#define UART_RX_PIN GPIO_PIN_9 - -// VBUS Sense detection -#define OTG_FS_VBUS_SENSE 1 -#define OTG_HS_VBUS_SENSE 0 - - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -UART_HandleTypeDef uartHandle; -TIM_HandleTypeDef tim2Handle; - - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ - -// Despite being call USB2_OTG -// OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port -void OTG_FS_IRQHandler(void) -{ - tud_int_handler(0); -} - -// Despite being call USB2_OTG -// OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port -void OTG_HS_IRQHandler(void) -{ - tud_int_handler(1); -} - - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_stm32h7_clock_init(void) -{ - RCC_OscInitTypeDef RCC_OscInitStruct = {0}; - RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; - - __HAL_RCC_SYSCFG_CLK_ENABLE(); - - // Supply configuration update enable - HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY); - - // Configure the main internal regulator output voltage - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE0); - - while (!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) - { - } - // Macro to configure the PLL clock source - __HAL_RCC_PLL_PLLSOURCE_CONFIG(RCC_PLLSOURCE_HSE); - - // Initializes the RCC Oscillators according to the specified parameters in the RCC_OscInitTypeDef structure. - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = 2; - RCC_OscInitStruct.PLL.PLLN = 240; - RCC_OscInitStruct.PLL.PLLP = 2; - RCC_OscInitStruct.PLL.PLLQ = 2; - RCC_OscInitStruct.PLL.PLLR = 2; - RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2; - RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE; - RCC_OscInitStruct.PLL.PLLFRACN = 0; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB | RCC_PERIPHCLK_USART3; - PeriphClkInitStruct.PLL3.PLL3M = 8; - PeriphClkInitStruct.PLL3.PLL3N = 336; - PeriphClkInitStruct.PLL3.PLL3P = 2; - PeriphClkInitStruct.PLL3.PLL3Q = 7; - PeriphClkInitStruct.PLL3.PLL3R = 2; - PeriphClkInitStruct.PLL3.PLL3RGE = RCC_PLL3VCIRANGE_0; - PeriphClkInitStruct.PLL3.PLL3VCOSEL = RCC_PLL3VCOWIDE; - PeriphClkInitStruct.PLL3.PLL3FRACN = 0; - PeriphClkInitStruct.Usart234578ClockSelection = RCC_USART234578CLKSOURCE_PLL3; - PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL3; - HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); - - // Initializes the CPU, AHB and APB buses clocks - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_D3PCLK1 | RCC_CLOCKTYPE_D1PCLK1; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2; - RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2; - RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; - RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); - - __HAL_RCC_CSI_ENABLE(); - - // Enable SYSCFG clock mondatory for I/O Compensation Cell - __HAL_RCC_SYSCFG_CLK_ENABLE(); - - // Enables the I/O Compensation Cell - HAL_EnableCompensationCell(); - - // Enable voltage detector - HAL_PWREx_EnableUSBVoltageDetector(); - - return; -} - - -//--------------------------------------------------------------------+ -// Timer implementation for board delay -// This should be OS safe and doesn't require the scheduler to be running -//--------------------------------------------------------------------+ -static void init_timer(void) -{ - TIM_ClockConfigTypeDef sClockSourceConfig = {0}; - - __HAL_RCC_TIM2_CLK_ENABLE(); - - //Assuming timer clock is running at 260Mhz this should configure the timer counter to 1000Hz - tim2Handle.Instance = TIM2; - tim2Handle.Init.Prescaler = 60000U - 1U; - tim2Handle.Init.CounterMode = TIM_COUNTERMODE_UP; - tim2Handle.Init.Period = 0xFFFFFFFFU; - tim2Handle.Init.ClockDivision = TIM_CLOCKDIVISION_DIV4; - tim2Handle.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE; - HAL_TIM_Base_Init(&tim2Handle); - - sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL; - HAL_TIM_ConfigClockSource(&tim2Handle, &sClockSourceConfig); - - //Start the timer - HAL_TIM_Base_Start(&tim2Handle); - - return; -} - - -// Custom board delay implementation using timer ticks -static inline void timer_board_delay(uint32_t ms) -{ - uint32_t startMs = __HAL_TIM_GET_COUNTER(&tim2Handle); - while ((__HAL_TIM_GET_COUNTER(&tim2Handle) - startMs) < ms) - { - asm("nop"); //do nothing - } -} - - -//Board initialisation -void board_init(void) -{ - GPIO_InitTypeDef GPIO_InitStruct; - - // Init clocks - board_stm32h7_clock_init(); - - // Init timer for delays - init_timer(); - - //Disable systick for now - //If using an RTOS and the systick interrupt fires without the scheduler running you might have an issue - //Because this init code now introduces delays, the systick should be disabled until after board init - SysTick->CTRL &= ~1U; - - // Enable GPIO clocks - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOB_CLK_ENABLE(); - __HAL_RCC_GPIOC_CLK_ENABLE(); - __HAL_RCC_GPIOD_CLK_ENABLE(); - __HAL_RCC_GPIOH_CLK_ENABLE(); - __HAL_RCC_GPIOI_CLK_ENABLE(); - - // Enable UART Clock - UART_CLK_EN(); - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - - // LED - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - // PHY RST Pin - GPIO_InitStruct.Pin = ULPI_RST_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - HAL_GPIO_Init(ULPI_RST_PORT, &GPIO_InitStruct); - HAL_GPIO_WritePin(ULPI_RST_PORT, ULPI_RST_PIN, 0U); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - // Uart - GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Alternate = UART_GPIO_AF; - HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); - - uartHandle.Instance = UART_DEV; - uartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; - uartHandle.Init.WordLength = UART_WORDLENGTH_8B; - uartHandle.Init.StopBits = UART_STOPBITS_1; - uartHandle.Init.Parity = UART_PARITY_NONE; - uartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; - uartHandle.Init.Mode = UART_MODE_TX_RX; - uartHandle.Init.OverSampling = UART_OVERSAMPLING_16; - HAL_UART_Init(&uartHandle); - -#if BOARD_DEVICE_RHPORT_NUM == 0 - //Full Speed - - // Configure DM DP Pins - GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // This for ID line debug - GPIO_InitStruct.Pin = GPIO_PIN_10; - GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - __HAL_RCC_USB2_OTG_FS_CLK_ENABLE(); - -#if OTG_FS_VBUS_SENSE - // Configure VBUS Pin - GPIO_InitStruct.Pin = GPIO_PIN_9; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; -#else - // Disable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; -#endif // vbus sense - -#elif BOARD_DEVICE_RHPORT_NUM == 1 - //High Speed - - /**USB_OTG_HS GPIO Configuration - PC0 ------> USB_OTG_HS_ULPI_STP - PC2_C ------> USB_OTG_HS_ULPI_DIR - PC3_C ------> USB_OTG_HS_ULPI_NXT - PA3 ------> USB_OTG_HS_ULPI_D0 - PA5 ------> USB_OTG_HS_ULPI_CK - PB1 ------> USB_OTG_HS_ULPI_D2 - PB10 ------> USB_OTG_HS_ULPI_D3 - PB11 ------> USB_OTG_HS_ULPI_D4 - PB12 ------> USB_OTG_HS_ULPI_D5 - PB13 ------> USB_OTG_HS_ULPI_D6 - PB5 ------> USB_OTG_HS_ULPI_D7 - */ - - GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_2 | GPIO_PIN_3; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); - - GPIO_InitStruct.Pin = GPIO_PIN_3 | GPIO_PIN_5; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_5; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); - - // Peripheral clock enable - __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); - __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE(); - -#if OTG_HS_VBUS_SENSE -#error OTG HS VBUS Sense enabled is not implemented -#else - // No VBUS sense - USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; -#endif - - // Force device mode - USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD; - USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; - - //Reset the PHY - Change the delays as you see fit - timer_board_delay(5U); //Delay 5ms - HAL_GPIO_WritePin(ULPI_RST_PORT, ULPI_RST_PIN, 1U); - timer_board_delay(20U); //Delay 20ms - HAL_GPIO_WritePin(ULPI_RST_PORT, ULPI_RST_PIN, 0U); - timer_board_delay(20U); //Delay 20ms - -#endif // rhport = 1 - - //Disable the timer used for delays - HAL_TIM_Base_Stop(&tim2Handle); - __HAL_RCC_TIM2_CLK_DISABLE(); - - // Configure systick 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - - //Enable systick - SysTick->CTRL |= ~1U; - - return; -} - - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); -} - - -uint32_t board_button_read(void) -{ - return (BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN)) ? 1 : 0; -} - - -int board_uart_read(uint8_t *buf, int len) -{ - (void)buf; - (void)len; - return 0; -} - - -int board_uart_write(void const *buf, int len) -{ - HAL_UART_Transmit(&uartHandle, (uint8_t *)buf, len, 0xffff); - return len; -} - - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - - -void HardFault_Handler(void) -{ - asm("bkpt"); -} - - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ -}
\ No newline at end of file diff --git a/tinyusb/hw/bsp/waveshare_openh743i/board.mk b/tinyusb/hw/bsp/waveshare_openh743i/board.mk deleted file mode 100755 index 721df1bd..00000000 --- a/tinyusb/hw/bsp/waveshare_openh743i/board.mk +++ /dev/null @@ -1,64 +0,0 @@ -UF2_FAMILY_ID = 0x6db66082 -ST_FAMILY = h7 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -# Default is HS port -PORT ?= 1 - -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s -LD_FILE = $(BOARD_PATH)/STM32H743IITX_FLASH.ld - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m7 \ - -mfloat-abi=hard \ - -mfpu=fpv5-d16 \ - -nostdlib -nostartfiles \ - -DCFG_TUSB_MCU=OPT_MCU_STM32H7 \ - -DBOARD_DEVICE_RHPORT_NUM=$(PORT) \ - -DSTM32H743xx \ - -DHSE_VALUE=8000000 - -ifeq ($(PORT), 1) - CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED - $(info "PORT1 High Speed") -else - $(info "PORT0 Full Speed") -endif - -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align - -# All source paths should be relative to the top level. -SRC_C += \ - src/portable/st/synopsys/dcd_synopsys.c \ - $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_tim.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_tim_ex.c - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM7/r0p1 - -# For flash-jlink target -JLINK_DEVICE = stm32h743ii - -# flash target using jlink -flash: flash-jlink
\ No newline at end of file diff --git a/tinyusb/hw/bsp/waveshare_openh743i/stm32h7xx_hal_conf.h b/tinyusb/hw/bsp/waveshare_openh743i/stm32h7xx_hal_conf.h deleted file mode 100755 index 11d29ed6..00000000 --- a/tinyusb/hw/bsp/waveshare_openh743i/stm32h7xx_hal_conf.h +++ /dev/null @@ -1,483 +0,0 @@ -/** - ****************************************************************************** - * @file stm32h7xx_hal_conf_template.h - * @brief HAL configuration template file. - * This file should be copied to the application folder and renamed - * to stm32h7xx_hal_conf.h. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32H7xx_HAL_CONF_H -#define __STM32H7xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -#define HAL_ADC_MODULE_ENABLED -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_COMP_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_FDCAN_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_HASH_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_HRTIM_MODULE_ENABLED */ -/* #define HAL_HSEM_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_JPEG_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_MDIOS_MODULE_ENABLED */ -/* #define HAL_MDMA_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_OPAMP_MODULE_ENABLED */ -/* #define HAL_PCD_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_RAMECC_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -#define HAL_SPI_MODULE_ENABLED -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SWPMI_MODULE_ENABLED */ -#define HAL_TIM_MODULE_ENABLED -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ - -/* ########################## Oscillator Values adaptation ####################*/ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) -//#define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ -#error HSE_VALUE is not defined -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal oscillator (CSI) default value. - * This value is the default CSI value after Reset. - */ -#if !defined (CSI_VALUE) - #define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ -#endif /* CSI_VALUE */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief External Low Speed oscillator (LSE) value. - * This value is used by the UART, RTC HAL module to compute the system frequency - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/ -#endif /* LSE_VALUE */ - - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)32000) /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature.*/ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External clock in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0x0F) /*!< tick interrupt priority */ -#define USE_RTOS 0 -#define USE_SD_TRANSCEIVER 1U /*!< use uSD Transceiver */ -#define USE_SPI_CRC 1U /*!< use CRC in SPI */ - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################### Ethernet Configuration ######################### */ -#define ETH_TX_DESC_CNT 4 /* number of Ethernet Tx DMA descriptors */ -#define ETH_RX_DESC_CNT 4 /* number of Ethernet Rx DMA descriptors */ - -#define ETH_MAC_ADDR0 ((uint8_t)0x02) -#define ETH_MAC_ADDR1 ((uint8_t)0x00) -#define ETH_MAC_ADDR2 ((uint8_t)0x00) -#define ETH_MAC_ADDR3 ((uint8_t)0x00) -#define ETH_MAC_ADDR4 ((uint8_t)0x00) -#define ETH_MAC_ADDR5 ((uint8_t)0x00) - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1 */ - - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32h7xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32h7xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32h7xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_MDMA_MODULE_ENABLED - #include "stm32h7xx_hal_mdma.h" -#endif /* HAL_MDMA_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32h7xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32h7xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32h7xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32h7xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32h7xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32h7xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32h7xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32h7xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32h7xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_FDCAN_MODULE_ENABLED - #include "stm32h7xx_hal_fdcan.h" -#endif /* HAL_FDCAN_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32h7xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_COMP_MODULE_ENABLED - #include "stm32h7xx_hal_comp.h" -#endif /* HAL_COMP_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32h7xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32h7xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32h7xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32h7xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_HRTIM_MODULE_ENABLED - #include "stm32h7xx_hal_hrtim.h" -#endif /* HAL_HRTIM_MODULE_ENABLED */ - -#ifdef HAL_HSEM_MODULE_ENABLED - #include "stm32h7xx_hal_hsem.h" -#endif /* HAL_HSEM_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32h7xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32h7xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32h7xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32h7xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32h7xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32h7xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_JPEG_MODULE_ENABLED - #include "stm32h7xx_hal_jpeg.h" -#endif /* HAL_JPEG_MODULE_ENABLED */ - -#ifdef HAL_MDIOS_MODULE_ENABLED - #include "stm32h7xx_hal_mdios.h" -#endif /* HAL_MDIOS_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32h7xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED -#include "stm32h7xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED -#include "stm32h7xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_OPAMP_MODULE_ENABLED -#include "stm32h7xx_hal_opamp.h" -#endif /* HAL_OPAMP_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32h7xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32h7xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_RAMECC_MODULE_ENABLED - #include "stm32h7xx_hal_ramecc.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32h7xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32h7xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32h7xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32h7xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32h7xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32h7xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32h7xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_SWPMI_MODULE_ENABLED - #include "stm32h7xx_hal_swpmi.h" -#endif /* HAL_SWPMI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32h7xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32h7xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32h7xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32h7xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32h7xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32h7xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32h7xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32h7xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32h7xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t *file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32H7xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |