diff options
Diffstat (limited to 'tinyusb/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/mpu_armv8.h')
m--------- | tinyusb | 0 | ||||
-rwxr-xr-x | tinyusb/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/mpu_armv8.h | 347 |
2 files changed, 0 insertions, 347 deletions
diff --git a/tinyusb b/tinyusb new file mode 160000 +Subproject f8288be03f28ad7b944e6925f49422dfa39202c diff --git a/tinyusb/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/mpu_armv8.h b/tinyusb/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/mpu_armv8.h deleted file mode 100755 index bc3b0510..00000000 --- a/tinyusb/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/mpu_armv8.h +++ /dev/null @@ -1,347 +0,0 @@ -/****************************************************************************** - * @file mpu_armv8.h - * @brief CMSIS MPU API for Armv8-M and Armv8.1-M MPU - * @version V5.1.0 - * @date 08. March 2019 - ******************************************************************************/ -/* - * Copyright (c) 2017-2019 Arm Limited. All rights reserved. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - /* Copyright (c) 2019 Modified by Dialog Semiconductor */ - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined (__clang__) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef ARM_MPU_ARMV8_H -#define ARM_MPU_ARMV8_H - -/** \brief Attribute for device memory (outer only) */ -#define ARM_MPU_ATTR_DEVICE ( 0U ) - -/** \brief Attribute for non-cacheable, normal memory */ -#define ARM_MPU_ATTR_NON_CACHEABLE ( 4U ) - -/** \brief Attribute for normal memory (outer and inner) -* \param NT Non-Transient: Set to 1 for non-transient data. -* \param WB Write-Back: Set to 1 to use write-back update policy. -* \param RA Read Allocation: Set to 1 to use cache allocation on read miss. -* \param WA Write Allocation: Set to 1 to use cache allocation on write miss. -*/ -#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \ - (((NT & 1U) << 3U) | ((WB & 1U) << 2U) | ((RA & 1U) << 1U) | (WA & 1U)) - -/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */ -#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U) - -/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */ -#define ARM_MPU_ATTR_DEVICE_nGnRE (1U) - -/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */ -#define ARM_MPU_ATTR_DEVICE_nGRE (2U) - -/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */ -#define ARM_MPU_ATTR_DEVICE_GRE (3U) - -/** \brief Memory Attribute -* \param O Outer memory attributes -* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes -*/ -#define ARM_MPU_ATTR(O, I) (((O & 0xFU) << 4U) | (((O & 0xFU) != 0U) ? (I & 0xFU) : ((I & 0x3U) << 2U))) - -/** \brief Normal memory non-shareable */ -#define ARM_MPU_SH_NON (0U) - -/** \brief Normal memory outer shareable */ -#define ARM_MPU_SH_OUTER (2U) - -/** \brief Normal memory inner shareable */ -#define ARM_MPU_SH_INNER (3U) - -/** \brief Memory access permissions -* \param RO Read-Only: Set to 1 for read-only memory. -* \param NP Non-Privileged: Set to 1 for non-privileged memory. -*/ -#define ARM_MPU_AP_(RO, NP) (((RO & 1U) << 1U) | (NP & 1U)) - -/** \brief Region Base Address Register value -* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned. -* \param SH Defines the Shareability domain for this memory region. -* \param RO Read-Only: Set to 1 for a read-only memory region. -* \param NP Non-Privileged: Set to 1 for a non-privileged memory region. -* \param XN eXecute Never: Set to 1 for a non-executable memory region. -*/ -#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \ - ((BASE & MPU_RBAR_BASE_Msk) | \ - ((SH << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \ - ((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \ - ((XN << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk)) - -/** \brief Region Limit Address Register value -* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. -* \param IDX The attribute index to be associated with this memory region. -*/ -#define ARM_MPU_RLAR(LIMIT, IDX) \ - ((LIMIT & MPU_RLAR_LIMIT_Msk) | \ - ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ - (MPU_RLAR_EN_Msk)) - -#if defined(MPU_RLAR_PXN_Pos) - -/** \brief Region Limit Address Register with PXN value -* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. -* \param PXN Privileged execute never. Defines whether code can be executed from this privileged region. -* \param IDX The attribute index to be associated with this memory region. -*/ -#define ARM_MPU_RLAR_PXN(LIMIT, PXN, IDX) \ - ((LIMIT & MPU_RLAR_LIMIT_Msk) | \ - ((PXN << MPU_RLAR_PXN_Pos) & MPU_RLAR_PXN_Msk) | \ - ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ - (MPU_RLAR_EN_Msk)) - -#endif - -/** -* Struct for a single MPU Region -*/ -typedef struct { - uint32_t RBAR; /*!< Region Base Address Register value */ - uint32_t RLAR; /*!< Region Limit Address Register value */ -} ARM_MPU_Region_t; - -/** Enable the MPU. -* \param MPU_Control Default access permissions for unconfigured regions. -*/ -__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) -{ - MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; -#ifdef SCB_SHCSR_MEMFAULTENA_Msk - SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; -#endif - __DSB(); - __ISB(); -} - -/** Disable the MPU. -*/ -__STATIC_INLINE void ARM_MPU_Disable(void) -{ - __DMB(); -#ifdef SCB_SHCSR_MEMFAULTENA_Msk - SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; -#endif - MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; -} - -#ifdef MPU_NS -/** Enable the Non-secure MPU. -* \param MPU_Control Default access permissions for unconfigured regions. -*/ -__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control) -{ - MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; -#ifdef SCB_SHCSR_MEMFAULTENA_Msk - SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; -#endif - __DSB(); - __ISB(); -} - -/** Disable the Non-secure MPU. -*/ -__STATIC_INLINE void ARM_MPU_Disable_NS(void) -{ - __DMB(); -#ifdef SCB_SHCSR_MEMFAULTENA_Msk - SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; -#endif - MPU_NS->CTRL &= ~MPU_CTRL_ENABLE_Msk; -} -#endif - -/** Set the memory attribute encoding to the given MPU. -* \param mpu Pointer to the MPU to be configured. -* \param idx The attribute index to be set [0-7] -* \param attr The attribute value to be set. -*/ -__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr) -{ - const uint8_t reg = idx / 4U; - const uint32_t pos = ((idx % 4U) * 8U); - const uint32_t mask = 0xFFU << pos; - - if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) { - return; // invalid index - } - - mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask)); -} - -/** Set the memory attribute encoding. -* \param idx The attribute index to be set [0-7] -* \param attr The attribute value to be set. -*/ -__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr) -{ - ARM_MPU_SetMemAttrEx(MPU, idx, attr); -} - -#ifdef MPU_NS -/** Set the memory attribute encoding to the Non-secure MPU. -* \param idx The attribute index to be set [0-7] -* \param attr The attribute value to be set. -*/ -__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr) -{ - ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr); -} -#endif - -/** Clear and disable the given MPU region of the given MPU. -* \param mpu Pointer to MPU to be used. -* \param rnr Region number to be cleared. -*/ -__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr) -{ - mpu->RNR = rnr; - mpu->RLAR = 0U; -} - -/** Clear and disable the given MPU region. -* \param rnr Region number to be cleared. -*/ -__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) -{ - ARM_MPU_ClrRegionEx(MPU, rnr); -} - -#ifdef MPU_NS -/** Clear and disable the given Non-secure MPU region. -* \param rnr Region number to be cleared. -*/ -__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr) -{ - ARM_MPU_ClrRegionEx(MPU_NS, rnr); -} -#endif - -/** Configure the given MPU region of the given MPU. -* \param mpu Pointer to MPU to be used. -* \param rnr Region number to be configured. -* \param rbar Value for RBAR register. -* \param rlar Value for RLAR register. -*/ -__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar) -{ - mpu->RNR = rnr; - mpu->RBAR = rbar; - mpu->RLAR = rlar; -} - -/** Configure the given MPU region. -* \param rnr Region number to be configured. -* \param rbar Value for RBAR register. -* \param rlar Value for RLAR register. -*/ -__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar) -{ - ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar); -} - -#ifdef MPU_NS -/** Configure the given Non-secure MPU region. -* \param rnr Region number to be configured. -* \param rbar Value for RBAR register. -* \param rlar Value for RLAR register. -*/ -__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar) -{ - ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar); -} -#endif - -/** Memcopy with strictly ordered memory access, e.g. for register targets. -* \param dst Destination data is copied to. -* \param src Source data is copied from. -* \param len Amount of data words to be copied. -*/ -__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) -{ - uint32_t i; - for (i = 0U; i < len; ++i) - { - dst[i] = src[i]; - } -} - -/** Load the given number of MPU regions from a table to the given MPU. -* \param mpu Pointer to the MPU registers to be used. -* \param rnr First region number to be configured. -* \param table Pointer to the MPU configuration table. -* \param cnt Amount of regions to be configured. -*/ -__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) -{ - const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; - if (cnt == 1U) { - mpu->RNR = rnr; - ARM_MPU_OrderedMemcpy(&(mpu->RBAR), &(table->RBAR), rowWordSize); - } else { - uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U); - uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES; - - mpu->RNR = rnrBase; - while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) { - uint32_t c = MPU_TYPE_RALIASES - rnrOffset; - ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize); - table += c; - cnt -= c; - rnrOffset = 0U; - rnrBase += MPU_TYPE_RALIASES; - mpu->RNR = rnrBase; - } - - ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize); - } -} - -/** Load the given number of MPU regions from a table. -* \param rnr First region number to be configured. -* \param table Pointer to the MPU configuration table. -* \param cnt Amount of regions to be configured. -*/ -__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) -{ - ARM_MPU_LoadEx(MPU, rnr, table, cnt); -} - -#ifdef MPU_NS -/** Load the given number of MPU regions from a table to the Non-secure MPU. -* \param rnr First region number to be configured. -* \param table Pointer to the MPU configuration table. -* \param cnt Amount of regions to be configured. -*/ -__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) -{ - ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt); -} -#endif - -#endif - |