diff options
Diffstat (limited to 'tinyusb/hw/mcu/dialog/da1469x/include/mcu/mcu.h')
-rwxr-xr-x | tinyusb/hw/mcu/dialog/da1469x/include/mcu/mcu.h | 165 |
1 files changed, 165 insertions, 0 deletions
diff --git a/tinyusb/hw/mcu/dialog/da1469x/include/mcu/mcu.h b/tinyusb/hw/mcu/dialog/da1469x/include/mcu/mcu.h new file mode 100755 index 00000000..1e673678 --- /dev/null +++ b/tinyusb/hw/mcu/dialog/da1469x/include/mcu/mcu.h @@ -0,0 +1,165 @@ +/* + * Licensed to the Apache Software Foundation (ASF) under one + * or more contributor license agreements. See the NOTICE file + * distributed with this work for additional information + * regarding copyright ownership. The ASF licenses this file + * to you under the Apache License, Version 2.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY + * KIND, either express or implied. See the License for the + * specific language governing permissions and limitations + * under the License. + */ + +#ifndef __MCU_MCU_H_ +#define __MCU_MCU_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "DA1469xAB.h" + +#define sec_text_ram_core __attribute__((section(".text_ram"))) __attribute__((noinline)) + +#define MCU_SYSVIEW_INTERRUPTS \ + "I#1=Reset,I#2=MNI,I#3=HardFault,I#4=MemoryMgmt,I#5=BusFault,I#6=UsageFault," \ + "I#7=SecureFault,I#11=SVCall,I#12=DebugMonitor,I#14=PendSV,I#15=SysTick," \ + "I#16=SENSOR_NODE,I#17=DMA,I#18=CHARGER_STATE,I#19=CHARGER_ERROR," \ + "I#20=CMAC2SYS,I#21=UART,I#22=UART2,I#23=UART3,I#24=I2C,I#25=I2C2,I#26=SPI," \ + "I#27=SPI2,I#28=PCM,I#29=SRC_IN,I#30=SRC_OUT,I#31=USB,I#32=TIMER," \ + "I#33=TIMER2,I#34=RTC,I#35=KEY_WKUP_GPIO,I#36=PDC,I#37=VBUS,I#38=MRM," \ + "I#39=MOTOR_CONTROLLER,I#40=TRNG,I#41=DCDC,I#42=XTAL32M_RDY,I#43=ADC," \ + "I#44=ADC2,I#45=CRYPTO,I#46=CAPTIMER1,I#47=RFDIAG,I#48=LCD_CONTROLLER," \ + "I#49=PLL_LOCK,I#50=TIMER3,I#51=TIMER4,I#52=LRA,I#53=RTC_EVENT," \ + "I#54=GPIO_P0,I#55=GPIO_P1" + +/** +* \brief GPIO function +* +*/ +typedef enum { + MCU_GPIO_FUNC_GPIO = 0, /**< GPIO */ + MCU_GPIO_FUNC_UART_RX = 1, /**< GPIO as UART RX */ + MCU_GPIO_FUNC_UART_TX = 2, /**< GPIO as UART TX */ + MCU_GPIO_FUNC_UART2_RX = 3, /**< GPIO as UART2 RX */ + MCU_GPIO_FUNC_UART2_TX = 4, /**< GPIO as UART2 TX */ + MCU_GPIO_FUNC_UART2_CTSN = 5, /**< GPIO as UART2 CTSN */ + MCU_GPIO_FUNC_UART2_RTSN = 6, /**< GPIO as UART2 RTSN */ + MCU_GPIO_FUNC_UART3_RX = 7, /**< GPIO as UART3 RX */ + MCU_GPIO_FUNC_UART3_TX = 8, /**< GPIO as UART3 TX */ + MCU_GPIO_FUNC_UART3_CTSN = 9, /**< GPIO as UART3 CTSN */ + MCU_GPIO_FUNC_UART3_RTSN = 10, /**< GPIO as UART3 RTSN */ + MCU_GPIO_FUNC_ISO_CLK = 11, /**< GPIO as ISO CLK */ + MCU_GPIO_FUNC_ISO_DATA = 12, /**< GPIO as ISO DATA */ + MCU_GPIO_FUNC_SPI_DI = 13, /**< GPIO as SPI DI */ + MCU_GPIO_FUNC_SPI_DO = 14, /**< GPIO as SPI DO */ + MCU_GPIO_FUNC_SPI_CLK = 15, /**< GPIO as SPI CLK */ + MCU_GPIO_FUNC_SPI_EN = 16, /**< GPIO as SPI EN */ + MCU_GPIO_FUNC_SPI2_DI = 17, /**< GPIO as SPI2 DI */ + MCU_GPIO_FUNC_SPI2_DO = 18, /**< GPIO as SPI2 DO */ + MCU_GPIO_FUNC_SPI2_CLK = 19, /**< GPIO as SPI2 CLK */ + MCU_GPIO_FUNC_SPI2_EN = 20, /**< GPIO as SPI2 EN */ + MCU_GPIO_FUNC_I2C_SCL = 21, /**< GPIO as I2C SCL */ + MCU_GPIO_FUNC_I2C_SDA = 22, /**< GPIO as I2C SDA */ + MCU_GPIO_FUNC_I2C2_SCL = 23, /**< GPIO as I2C2 SCL */ + MCU_GPIO_FUNC_I2C2_SDA = 24, /**< GPIO as I2C2 SDA */ + MCU_GPIO_FUNC_USB_SOF = 25, /**< GPIO as USB SOF */ + MCU_GPIO_FUNC_ADC = 26, /**< GPIO as ADC (dedicated pin) */ + MCU_GPIO_FUNC_USB = 27, /**< GPIO as USB */ + MCU_GPIO_FUNC_PCM_DI = 28, /**< GPIO as PCM DI */ + MCU_GPIO_FUNC_PCM_DO = 29, /**< GPIO as PCM DO */ + MCU_GPIO_FUNC_PCM_FSC = 30, /**< GPIO as PCM FSC */ + MCU_GPIO_FUNC_PCM_CLK = 31, /**< GPIO as PCM CLK */ + MCU_GPIO_FUNC_PDM_DATA = 32, /**< GPIO as PDM DATA */ + MCU_GPIO_FUNC_PDM_CLK = 33, /**< GPIO as PDM CLK */ + MCU_GPIO_FUNC_COEX_EXT_ACT = 34, /**< GPIO as COEX EXT ACT0 */ + MCU_GPIO_FUNC_COEX_SMART_ACT = 35, /**< GPIO as COEX SMART ACT */ + MCU_GPIO_FUNC_COEX_SMART_PRI = 36, /**< GPIO as COEX SMART PRI */ + MCU_GPIO_FUNC_PORT0_DCF = 37, /**< GPIO as PORT0 DCF */ + MCU_GPIO_FUNC_PORT1_DCF = 38, /**< GPIO as PORT1 DCF */ + MCU_GPIO_FUNC_PORT2_DCF = 39, /**< GPIO as PORT2 DCF */ + MCU_GPIO_FUNC_PORT3_DCF = 40, /**< GPIO as PORT3 DCF */ + MCU_GPIO_FUNC_PORT4_DCF = 41, /**< GPIO as PORT4 DCF */ + MCU_GPIO_FUNC_CLOCK = 42, /**< GPIO as CLOCK */ + MCU_GPIO_FUNC_PG = 43, /**< GPIO as PG */ + MCU_GPIO_FUNC_LCD = 44, /**< GPIO as LCD */ + MCU_GPIO_FUNC_LCD_SPI_DC = 45, /**< GPIO as LCD SPI DC */ + MCU_GPIO_FUNC_LCD_SPI_DO = 46, /**< GPIO as LCD SPI DO */ + MCU_GPIO_FUNC_LCD_SPI_CLK = 47, /**< GPIO as LCD SPI CLK */ + MCU_GPIO_FUNC_LCD_SPI_EN = 48, /**< GPIO as LCD SPI EN */ + MCU_GPIO_FUNC_TIM_PWM = 49, /**< GPIO as TIM PWM */ + MCU_GPIO_FUNC_TIM2_PWM = 50, /**< GPIO as TIM2 PWM */ + MCU_GPIO_FUNC_TIM_1SHOT = 51, /**< GPIO as TIM 1SHOT */ + MCU_GPIO_FUNC_TIM2_1SHOT = 52, /**< GPIO as TIM2 1SHOT */ + MCU_GPIO_FUNC_TIM3_PWM = 53, /**< GPIO as TIM3 PWM */ + MCU_GPIO_FUNC_TIM4_PWM = 54, /**< GPIO as TIM4 PWM */ + MCU_GPIO_FUNC_AGC_EXT = 55, /**< GPIO as AGC EXT */ + MCU_GPIO_FUNC_CMAC_DIAG0 = 56, /**< GPIO as CMAC DIAG0 */ + MCU_GPIO_FUNC_CMAC_DIAG1 = 57, /**< GPIO as CMAC DIAG1 */ + MCU_GPIO_FUNC_CMAC_DIAG2 = 58, /**< GPIO as CMAC DIAG2 */ + MCU_GPIO_FUNC_CMAC_DIAGX = 59, /**< GPIO as CMAC DIAGX */ + MCU_GPIO_FUNC_LAST, +} mcu_gpio_func; + +#define MCU_GPIO_MODE_INPUT 0x000 /**< GPIO as an input */ +#define MCU_GPIO_MODE_INPUT_PULLUP 0x100 /**< GPIO as an input with pull-up */ +#define MCU_GPIO_MODE_INPUT_PULLDOWN 0x200 /**< GPIO as an input with pull-down */ +#define MCU_GPIO_MODE_OUTPUT 0x300 /**< GPIO as an output */ +#define MCU_GPIO_MODE_OUTPUT_OPEN_DRAIN 0x700 /**< GPIO as an open-drain output */ + +#define MCU_GPIO_PORT0_PIN_COUNT 32 +#define MCU_GPIO_PORT0(pin) ((0 * 32) + (pin)) +#define MCU_GPIO_PORT1(pin) ((1 * 32) + (pin)) +#define MCU_DMA_CHAN_MAX 8 + +#define MCU_PIN_GPADC_SEL0 MCU_GPIO_PORT1(9) +#define MCU_PIN_GPADC_SEL1 MCU_GPIO_PORT0(25) +#define MCU_PIN_GPADC_SEL2 MCU_GPIO_PORT0(8) +#define MCU_PIN_GPADC_SEL3 MCU_GPIO_PORT0(9) +#define MCU_PIN_GPADC_SEL16 MCU_GPIO_PORT1(13) +#define MCU_PIN_GPADC_SEL17 MCU_GPIO_PORT1(12) +#define MCU_PIN_GPADC_SEL18 MCU_GPIO_PORT1(18) +#define MCU_PIN_GPADC_SEL19 MCU_GPIO_PORT1(19) +#define MCU_PIN_GPADC_DIFF0_P0 MCU_GPIO_PORT1(9) +#define MCU_PIN_GPADC_DIFF0_P1 MCU_GPIO_PORT0(25) +#define MCU_PIN_GPADC_DIFF1_P0 MCU_GPIO_PORT0(8) +#define MCU_PIN_GPADC_DIFF1_P1 MCU_GPIO_PORT0(9) + +#define MCU_PIN_SDADC0 MCU_GPIO_PORT1(9) +#define MCU_PIN_SDADC1 MCU_GPIO_PORT0(25) +#define MCU_PIN_SDADC2 MCU_GPIO_PORT0(8) +#define MCU_PIN_SDADC3 MCU_GPIO_PORT0(9) +#define MCU_PIN_SDADC4 MCU_GPIO_PORT1(14) +#define MCU_PIN_SDADC5 MCU_GPIO_PORT1(20) +#define MCU_PIN_SDADC6 MCU_GPIO_PORT1(21) +#define MCU_PIN_SDADC7 MCU_GPIO_PORT1(22) + +void mcu_gpio_set_pin_function(int pin, int mode, mcu_gpio_func func); +void mcu_gpio_enter_sleep(void); +void mcu_gpio_exit_sleep(void); + +#define MCU_MEM_QSPIF_M_END_REMAP_ADDRESS (0x800000) +#define MCU_MEM_QSPIF_M_START_ADDRESS (0x16000000) +#define MCU_MEM_QSPIF_M_END_ADDRESS (0x18000000) +#define MCU_MEM_SYSRAM_START_ADDRESS (0x20000000) +#define MCU_MEM_SYSRAM_END_ADDRESS (0x20080000) + +#define MCU_OTPM_BASE 0x30080000UL +#define MCU_OTPM_SIZE 4096 + +/* Largest group id seen on a DA14699 was 18 so far */ +#define MCU_TRIMV_GROUP_ID_MAX (18) + +#ifdef __cplusplus +} +#endif + +#endif /* __MCU_MCU_H_ */ + |