diff options
Diffstat (limited to 'tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_l2cap.h')
-rwxr-xr-x | tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_l2cap.h | 506 |
1 files changed, 0 insertions, 506 deletions
diff --git a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_l2cap.h b/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_l2cap.h deleted file mode 100755 index edaf6641..00000000 --- a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_l2cap.h +++ /dev/null @@ -1,506 +0,0 @@ -/* - * Copyright (c) 2011 - 2018, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - @addtogroup BLE_L2CAP Logical Link Control and Adaptation Protocol (L2CAP) - @{ - @brief Definitions and prototypes for the L2CAP interface. - */ - -#ifndef BLE_L2CAP_H__ -#define BLE_L2CAP_H__ - -#include <stdint.h> -#include "nrf_svc.h" -#include "nrf_error.h" -#include "ble_ranges.h" -#include "ble_types.h" -#include "ble_err.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/**@addtogroup BLE_L2CAP_TERMINOLOGY Terminology - * @{ - * @details - * - * L2CAP SDU - * - A data unit that the application can send/receive to/from a peer. - * - * L2CAP PDU - * - A data unit that is exchanged between local and remote L2CAP entities. - * It consists of L2CAP protocol control information and payload fields. - * The payload field can contain an L2CAP SDU or a part of an L2CAP SDU. - * - * L2CAP MTU - * - The maximum length of an L2CAP SDU. - * - * L2CAP MPS - * - The maximum length of an L2CAP PDU payload field. - * - * Credits - * - A value indicating the number of L2CAP PDUs that the receiver of the credit can send to the peer. - * @} */ - -/**@addtogroup BLE_L2CAP_ENUMERATIONS Enumerations - * @{ */ - -/**@brief L2CAP API SVC numbers. */ -enum BLE_L2CAP_SVCS -{ - SD_BLE_L2CAP_CH_SETUP = BLE_L2CAP_SVC_BASE + 0, /**< Set up an L2CAP channel. */ - SD_BLE_L2CAP_CH_RELEASE = BLE_L2CAP_SVC_BASE + 1, /**< Release an L2CAP channel. */ - SD_BLE_L2CAP_CH_RX = BLE_L2CAP_SVC_BASE + 2, /**< Receive an SDU on an L2CAP channel. */ - SD_BLE_L2CAP_CH_TX = BLE_L2CAP_SVC_BASE + 3, /**< Transmit an SDU on an L2CAP channel. */ - SD_BLE_L2CAP_CH_FLOW_CONTROL = BLE_L2CAP_SVC_BASE + 4, /**< Advanced SDU reception flow control. */ -}; - -/**@brief L2CAP Event IDs. */ -enum BLE_L2CAP_EVTS -{ - BLE_L2CAP_EVT_CH_SETUP_REQUEST = BLE_L2CAP_EVT_BASE + 0, /**< L2CAP Channel Setup Request event. - \n See @ref ble_l2cap_evt_ch_setup_request_t. */ - BLE_L2CAP_EVT_CH_SETUP_REFUSED = BLE_L2CAP_EVT_BASE + 1, /**< L2CAP Channel Setup Refused event. - \n See @ref ble_l2cap_evt_ch_setup_refused_t. */ - BLE_L2CAP_EVT_CH_SETUP = BLE_L2CAP_EVT_BASE + 2, /**< L2CAP Channel Setup Completed event. - \n See @ref ble_l2cap_evt_ch_setup_t. */ - BLE_L2CAP_EVT_CH_RELEASED = BLE_L2CAP_EVT_BASE + 3, /**< L2CAP Channel Released event. - \n No additional event structure applies. */ - BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED = BLE_L2CAP_EVT_BASE + 4, /**< L2CAP Channel SDU data buffer released event. - \n See @ref ble_l2cap_evt_ch_sdu_buf_released_t. */ - BLE_L2CAP_EVT_CH_CREDIT = BLE_L2CAP_EVT_BASE + 5, /**< L2CAP Channel Credit received. - \n See @ref ble_l2cap_evt_ch_credit_t. */ - BLE_L2CAP_EVT_CH_RX = BLE_L2CAP_EVT_BASE + 6, /**< L2CAP Channel SDU received. - \n See @ref ble_l2cap_evt_ch_rx_t. */ - BLE_L2CAP_EVT_CH_TX = BLE_L2CAP_EVT_BASE + 7, /**< L2CAP Channel SDU transmitted. - \n See @ref ble_l2cap_evt_ch_tx_t. */ -}; - -/** @} */ - -/**@addtogroup BLE_L2CAP_DEFINES Defines - * @{ */ - -/**@brief Maximum number of L2CAP channels per connection. */ -#define BLE_L2CAP_CH_COUNT_MAX (64) - -/**@brief Minimum L2CAP MTU, in bytes. */ -#define BLE_L2CAP_MTU_MIN (23) - -/**@brief Minimum L2CAP MPS, in bytes. */ -#define BLE_L2CAP_MPS_MIN (23) - -/**@brief Invalid CID. */ -#define BLE_L2CAP_CID_INVALID (0x0000) - -/**@brief Default number of credits for @ref sd_ble_l2cap_ch_flow_control. */ -#define BLE_L2CAP_CREDITS_DEFAULT (1) - -/**@defgroup BLE_L2CAP_CH_SETUP_REFUSED_SRCS L2CAP channel setup refused sources - * @{ */ -#define BLE_L2CAP_CH_SETUP_REFUSED_SRC_LOCAL (0x01) /**< Local. */ -#define BLE_L2CAP_CH_SETUP_REFUSED_SRC_REMOTE (0x02) /**< Remote. */ - /** @} */ - - /** @defgroup BLE_L2CAP_CH_STATUS_CODES L2CAP channel status codes - * @{ */ -#define BLE_L2CAP_CH_STATUS_CODE_SUCCESS (0x0000) /**< Success. */ -#define BLE_L2CAP_CH_STATUS_CODE_LE_PSM_NOT_SUPPORTED (0x0002) /**< LE_PSM not supported. */ -#define BLE_L2CAP_CH_STATUS_CODE_NO_RESOURCES (0x0004) /**< No resources available. */ -#define BLE_L2CAP_CH_STATUS_CODE_INSUFF_AUTHENTICATION (0x0005) /**< Insufficient authentication. */ -#define BLE_L2CAP_CH_STATUS_CODE_INSUFF_AUTHORIZATION (0x0006) /**< Insufficient authorization. */ -#define BLE_L2CAP_CH_STATUS_CODE_INSUFF_ENC_KEY_SIZE (0x0007) /**< Insufficient encryption key size. */ -#define BLE_L2CAP_CH_STATUS_CODE_INSUFF_ENC (0x0008) /**< Insufficient encryption. */ -#define BLE_L2CAP_CH_STATUS_CODE_INVALID_SCID (0x0009) /**< Invalid Source CID. */ -#define BLE_L2CAP_CH_STATUS_CODE_SCID_ALLOCATED (0x000A) /**< Source CID already allocated. */ -#define BLE_L2CAP_CH_STATUS_CODE_UNACCEPTABLE_PARAMS (0x000B) /**< Unacceptable parameters. */ -#define BLE_L2CAP_CH_STATUS_CODE_NOT_UNDERSTOOD (0x8000) /**< Command Reject received instead of LE Credit Based Connection Response. */ -#define BLE_L2CAP_CH_STATUS_CODE_TIMEOUT (0xC000) /**< Operation timed out. */ -/** @} */ - -/** @} */ - -/**@addtogroup BLE_L2CAP_STRUCTURES Structures - * @{ */ - -/** - * @brief BLE L2CAP connection configuration parameters, set with @ref sd_ble_cfg_set. - * - * @note These parameters are set per connection, so all L2CAP channels created on this connection - * will have the same parameters. - * - * @retval ::NRF_ERROR_INVALID_PARAM One or more of the following is true: - * - rx_mps is smaller than @ref BLE_L2CAP_MPS_MIN. - * - tx_mps is smaller than @ref BLE_L2CAP_MPS_MIN. - * - ch_count is greater than @ref BLE_L2CAP_CH_COUNT_MAX. - * @retval ::NRF_ERROR_NO_MEM rx_mps or tx_mps is set too high. - */ -typedef struct -{ - uint16_t rx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP shall - be able to receive on L2CAP channels on connections with this - configuration. The minimum value is @ref BLE_L2CAP_MPS_MIN. */ - uint16_t tx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP shall - be able to transmit on L2CAP channels on connections with this - configuration. The minimum value is @ref BLE_L2CAP_MPS_MIN. */ - uint8_t rx_queue_size; /**< Number of SDU data buffers that can be queued for reception per - L2CAP channel. The minimum value is one. */ - uint8_t tx_queue_size; /**< Number of SDU data buffers that can be queued for transmission - per L2CAP channel. The minimum value is one. */ - uint8_t ch_count; /**< Number of L2CAP channels the application can create per connection - with this configuration. The default value is zero, the maximum - value is @ref BLE_L2CAP_CH_COUNT_MAX. - @note if this parameter is set to zero, all other parameters in - @ref ble_l2cap_conn_cfg_t are ignored. */ -} ble_l2cap_conn_cfg_t; - -/**@brief L2CAP channel RX parameters. */ -typedef struct -{ - uint16_t rx_mtu; /**< The maximum L2CAP SDU size, in bytes, that L2CAP shall be able to - receive on this L2CAP channel. - - Must be equal to or greater than @ref BLE_L2CAP_MTU_MIN. */ - uint16_t rx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP shall be - able to receive on this L2CAP channel. - - Must be equal to or greater than @ref BLE_L2CAP_MPS_MIN. - - Must be equal to or less than @ref ble_l2cap_conn_cfg_t::rx_mps. */ - ble_data_t sdu_buf; /**< SDU data buffer for reception. - - If @ref ble_data_t::p_data is non-NULL, initial credits are - issued to the peer. - - If @ref ble_data_t::p_data is NULL, no initial credits are - issued to the peer. */ -} ble_l2cap_ch_rx_params_t; - -/**@brief L2CAP channel setup parameters. */ -typedef struct -{ - ble_l2cap_ch_rx_params_t rx_params; /**< L2CAP channel RX parameters. */ - uint16_t le_psm; /**< LE Protocol/Service Multiplexer. Used when requesting - setup of an L2CAP channel, ignored otherwise. */ - uint16_t status; /**< Status code, see @ref BLE_L2CAP_CH_STATUS_CODES. - Used when replying to a setup request of an L2CAP - channel, ignored otherwise. */ -} ble_l2cap_ch_setup_params_t; - -/**@brief L2CAP channel TX parameters. */ -typedef struct -{ - uint16_t tx_mtu; /**< The maximum L2CAP SDU size, in bytes, that L2CAP is able to - transmit on this L2CAP channel. */ - uint16_t peer_mps; /**< The maximum L2CAP PDU payload size, in bytes, that the peer is - able to receive on this L2CAP channel. */ - uint16_t tx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP is able - to transmit on this L2CAP channel. This is effective tx_mps, - selected by the SoftDevice as - MIN( @ref ble_l2cap_ch_tx_params_t::peer_mps, @ref ble_l2cap_conn_cfg_t::tx_mps ) */ - uint16_t credits; /**< Initial credits given by the peer. */ -} ble_l2cap_ch_tx_params_t; - -/**@brief L2CAP Channel Setup Request event. */ -typedef struct -{ - ble_l2cap_ch_tx_params_t tx_params; /**< L2CAP channel TX parameters. */ - uint16_t le_psm; /**< LE Protocol/Service Multiplexer. */ -} ble_l2cap_evt_ch_setup_request_t; - -/**@brief L2CAP Channel Setup Refused event. */ -typedef struct -{ - uint8_t source; /**< Source, see @ref BLE_L2CAP_CH_SETUP_REFUSED_SRCS */ - uint16_t status; /**< Status code, see @ref BLE_L2CAP_CH_STATUS_CODES */ -} ble_l2cap_evt_ch_setup_refused_t; - -/**@brief L2CAP Channel Setup Completed event. */ -typedef struct -{ - ble_l2cap_ch_tx_params_t tx_params; /**< L2CAP channel TX parameters. */ -} ble_l2cap_evt_ch_setup_t; - -/**@brief L2CAP Channel SDU Data Buffer Released event. */ -typedef struct -{ - ble_data_t sdu_buf; /**< Returned reception or transmission SDU data buffer. The SoftDevice - returns SDU data buffers supplied by the application, which have - not yet been returned previously via a @ref BLE_L2CAP_EVT_CH_RX or - @ref BLE_L2CAP_EVT_CH_TX event. */ -} ble_l2cap_evt_ch_sdu_buf_released_t; - -/**@brief L2CAP Channel Credit received event. */ -typedef struct -{ - uint16_t credits; /**< Additional credits given by the peer. */ -} ble_l2cap_evt_ch_credit_t; - -/**@brief L2CAP Channel received SDU event. */ -typedef struct -{ - uint16_t sdu_len; /**< Total SDU length, in bytes. */ - ble_data_t sdu_buf; /**< SDU data buffer. - @note If there is not enough space in the buffer - (sdu_buf.len < sdu_len) then the rest of the SDU will be - silently discarded by the SoftDevice. */ -} ble_l2cap_evt_ch_rx_t; - -/**@brief L2CAP Channel transmitted SDU event. */ -typedef struct -{ - ble_data_t sdu_buf; /**< SDU data buffer. */ -} ble_l2cap_evt_ch_tx_t; - -/**@brief L2CAP event structure. */ -typedef struct -{ - uint16_t conn_handle; /**< Connection Handle on which the event occured. */ - uint16_t local_cid; /**< Local Channel ID of the L2CAP channel, or - @ref BLE_L2CAP_CID_INVALID if not present. */ - union - { - ble_l2cap_evt_ch_setup_request_t ch_setup_request; /**< L2CAP Channel Setup Request Event Parameters. */ - ble_l2cap_evt_ch_setup_refused_t ch_setup_refused; /**< L2CAP Channel Setup Refused Event Parameters. */ - ble_l2cap_evt_ch_setup_t ch_setup; /**< L2CAP Channel Setup Completed Event Parameters. */ - ble_l2cap_evt_ch_sdu_buf_released_t ch_sdu_buf_released;/**< L2CAP Channel SDU Data Buffer Released Event Parameters. */ - ble_l2cap_evt_ch_credit_t credit; /**< L2CAP Channel Credit Received Event Parameters. */ - ble_l2cap_evt_ch_rx_t rx; /**< L2CAP Channel SDU Received Event Parameters. */ - ble_l2cap_evt_ch_tx_t tx; /**< L2CAP Channel SDU Transmitted Event Parameters. */ - } params; /**< Event Parameters. */ -} ble_l2cap_evt_t; - -/** @} */ - -/**@addtogroup BLE_L2CAP_FUNCTIONS Functions - * @{ */ - -/**@brief Set up an L2CAP channel. - * - * @details This function is used to: - * - Request setup of an L2CAP channel: sends an LE Credit Based Connection Request packet to a peer. - * - Reply to a setup request of an L2CAP channel (if called in response to a - * @ref BLE_L2CAP_EVT_CH_SETUP_REQUEST event): sends an LE Credit Based Connection - * Response packet to a peer. - * - * @note A call to this function will require the application to keep the SDU data buffer alive - * until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_RX or - * @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event. - * - * @events - * @event{@ref BLE_L2CAP_EVT_CH_SETUP, Setup successful.} - * @event{@ref BLE_L2CAP_EVT_CH_SETUP_REFUSED, Setup failed.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_L2CAP_CH_SETUP_MSC} - * @endmscs - * - * @param[in] conn_handle Connection Handle. - * @param[in,out] p_local_cid Pointer to a uint16_t containing Local Channel ID of the L2CAP channel: - * - As input: @ref BLE_L2CAP_CID_INVALID when requesting setup of an L2CAP - * channel or local_cid provided in the @ref BLE_L2CAP_EVT_CH_SETUP_REQUEST - * event when replying to a setup request of an L2CAP channel. - * - As output: local_cid for this channel. - * @param[in] p_params L2CAP channel parameters. - * - * @retval ::NRF_SUCCESS Successfully queued request or response for transmission. - * @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. - * @retval ::NRF_ERROR_INVALID_LENGTH Supplied higher rx_mps than has been configured on this link. - * @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (L2CAP channel already set up). - * @retval ::NRF_ERROR_NOT_FOUND CID not found. - * @retval ::NRF_ERROR_RESOURCES The limit has been reached for available L2CAP channels, - * see @ref ble_l2cap_conn_cfg_t::ch_count. - */ -SVCALL(SD_BLE_L2CAP_CH_SETUP, uint32_t, sd_ble_l2cap_ch_setup(uint16_t conn_handle, uint16_t *p_local_cid, ble_l2cap_ch_setup_params_t const *p_params)); - -/**@brief Release an L2CAP channel. - * - * @details This sends a Disconnection Request packet to a peer. - * - * @events - * @event{@ref BLE_L2CAP_EVT_CH_RELEASED, Release complete.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_L2CAP_CH_RELEASE_MSC} - * @endmscs - * - * @param[in] conn_handle Connection Handle. - * @param[in] local_cid Local Channel ID of the L2CAP channel. - * - * @retval ::NRF_SUCCESS Successfully queued request for transmission. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is - * in progress for the L2CAP channel). - * @retval ::NRF_ERROR_NOT_FOUND CID not found. - */ -SVCALL(SD_BLE_L2CAP_CH_RELEASE, uint32_t, sd_ble_l2cap_ch_release(uint16_t conn_handle, uint16_t local_cid)); - -/**@brief Receive an SDU on an L2CAP channel. - * - * @details This may issue additional credits to the peer using an LE Flow Control Credit packet. - * - * @note A call to this function will require the application to keep the memory pointed by - * @ref ble_data_t::p_data alive until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_RX - * or @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event. - * - * @note The SoftDevice can queue up to @ref ble_l2cap_conn_cfg_t::rx_queue_size SDU data buffers - * for reception per L2CAP channel. - * - * @events - * @event{@ref BLE_L2CAP_EVT_CH_RX, The SDU is received.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_L2CAP_CH_RX_MSC} - * @endmscs - * - * @param[in] conn_handle Connection Handle. - * @param[in] local_cid Local Channel ID of the L2CAP channel. - * @param[in] p_sdu_buf Pointer to the SDU data buffer. - * - * @retval ::NRF_SUCCESS Buffer accepted. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is - * in progress for an L2CAP channel). - * @retval ::NRF_ERROR_NOT_FOUND CID not found. - * @retval ::NRF_ERROR_RESOURCES Too many SDU data buffers supplied. Wait for a - * @ref BLE_L2CAP_EVT_CH_RX event and retry. - */ -SVCALL(SD_BLE_L2CAP_CH_RX, uint32_t, sd_ble_l2cap_ch_rx(uint16_t conn_handle, uint16_t local_cid, ble_data_t const *p_sdu_buf)); - -/**@brief Transmit an SDU on an L2CAP channel. - * - * @note A call to this function will require the application to keep the memory pointed by - * @ref ble_data_t::p_data alive until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_TX - * or @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event. - * - * @note The SoftDevice can queue up to @ref ble_l2cap_conn_cfg_t::tx_queue_size SDUs for - * transmission per L2CAP channel. - * - * @note The application can keep track of the available credits for transmission by following - * the procedure below: - * - Store initial credits given by the peer in a variable. - * (Initial credits are provided in a @ref BLE_L2CAP_EVT_CH_SETUP event.) - * - Decrement the variable, which stores the currently available credits, by - * ceiling((@ref ble_data_t::len + 2) / tx_mps) when a call to this function returns - * @ref NRF_SUCCESS. (tx_mps is provided in a @ref BLE_L2CAP_EVT_CH_SETUP event.) - * - Increment the variable, which stores the currently available credits, by additional - * credits given by the peer in a @ref BLE_L2CAP_EVT_CH_CREDIT event. - * - * @events - * @event{@ref BLE_L2CAP_EVT_CH_TX, The SDU is transmitted.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_L2CAP_CH_TX_MSC} - * @endmscs - * - * @param[in] conn_handle Connection Handle. - * @param[in] local_cid Local Channel ID of the L2CAP channel. - * @param[in] p_sdu_buf Pointer to the SDU data buffer. - * - * @retval ::NRF_SUCCESS Successfully queued L2CAP SDU for transmission. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is - * in progress for the L2CAP channel). - * @retval ::NRF_ERROR_NOT_FOUND CID not found. - * @retval ::NRF_ERROR_DATA_SIZE Invalid SDU length supplied, must not be more than - * @ref ble_l2cap_ch_tx_params_t::tx_mtu provided in - * @ref BLE_L2CAP_EVT_CH_SETUP event. - * @retval ::NRF_ERROR_RESOURCES Too many SDUs queued for transmission. Wait for a - * @ref BLE_L2CAP_EVT_CH_TX event and retry. - */ -SVCALL(SD_BLE_L2CAP_CH_TX, uint32_t, sd_ble_l2cap_ch_tx(uint16_t conn_handle, uint16_t local_cid, ble_data_t const *p_sdu_buf)); - -/**@brief Advanced SDU reception flow control. - * - * @details Adjust the way the SoftDevice issues credits to the peer. - * This may issue additional credits to the peer using an LE Flow Control Credit packet. - * - * @mscs - * @mmsc{@ref BLE_L2CAP_CH_FLOW_CONTROL_MSC} - * @endmscs - * - * @param[in] conn_handle Connection Handle. - * @param[in] local_cid Local Channel ID of the L2CAP channel or @ref BLE_L2CAP_CID_INVALID to set - * the value that will be used for newly created channels. - * @param[in] credits Number of credits that the SoftDevice will make sure the peer has every - * time it starts using a new reception buffer. - * - @ref BLE_L2CAP_CREDITS_DEFAULT is the default value the SoftDevice will - * use if this function is not called. - * - If set to zero, the SoftDevice will stop issuing credits for new reception - * buffers the application provides or has provided. SDU reception that is - * currently ongoing will be allowed to complete. - * @param[out] p_credits NULL or pointer to a uint16_t. If a valid pointer is provided, it will be - * written by the SoftDevice with the number of credits that is or will be - * available to the peer. If the value written by the SoftDevice is 0 when - * credits parameter was set to 0, the peer will not be able to send more - * data until more credits are provided by calling this function again with - * credits > 0. This parameter is ignored when local_cid is set to - * @ref BLE_L2CAP_CID_INVALID. - * - * @note Application should take care when setting number of credits higher than default value. In - * this case the application must make sure that the SoftDevice always has reception buffers - * available (see @ref sd_ble_l2cap_ch_rx) for that channel. If the SoftDevice does not have - * such buffers available, packets may be NACKed on the Link Layer and all Bluetooth traffic - * on the connection handle may be stalled until the SoftDevice again has an available - * reception buffer. This applies even if the application has used this call to set the - * credits back to default, or zero. - * - * @retval ::NRF_SUCCESS Flow control parameters accepted. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is - * in progress for an L2CAP channel). - * @retval ::NRF_ERROR_NOT_FOUND CID not found. - */ -SVCALL(SD_BLE_L2CAP_CH_FLOW_CONTROL, uint32_t, sd_ble_l2cap_ch_flow_control(uint16_t conn_handle, uint16_t local_cid, uint16_t credits, uint16_t *p_credits)); - -/** @} */ - -#ifdef __cplusplus -} -#endif -#endif // BLE_L2CAP_H__ - -/** - @} -*/ |