diff options
Diffstat (limited to 'tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_soc.h')
m--------- | tinyusb | 0 | ||||
-rwxr-xr-x | tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_soc.h | 1079 |
2 files changed, 0 insertions, 1079 deletions
diff --git a/tinyusb b/tinyusb new file mode 160000 +Subproject f8288be03f28ad7b944e6925f49422dfa39202c diff --git a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_soc.h b/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_soc.h deleted file mode 100755 index beb4d3a5..00000000 --- a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_soc.h +++ /dev/null @@ -1,1079 +0,0 @@ -/* - * Copyright (c) 2015 - 2018, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * @defgroup nrf_soc_api SoC Library API - * @{ - * - * @brief APIs for the SoC library. - * - */ - -#ifndef NRF_SOC_H__ -#define NRF_SOC_H__ - -#include <stdint.h> -#include "nrf.h" -#include "nrf_svc.h" -#include "nrf_error.h" -#include "nrf_error_soc.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/**@addtogroup NRF_SOC_DEFINES Defines - * @{ */ - -/**@brief The number of the lowest SVC number reserved for the SoC library. */ -#define SOC_SVC_BASE (0x20) /**< Base value for SVCs that are available when the SoftDevice is disabled. */ -#define SOC_SVC_BASE_NOT_AVAILABLE (0x2C) /**< Base value for SVCs that are not available when the SoftDevice is disabled. */ - -/**@brief Guaranteed time for application to process radio inactive notification. */ -#define NRF_RADIO_NOTIFICATION_INACTIVE_GUARANTEED_TIME_US (62) - -/**@brief The minimum allowed timeslot extension time. */ -#define NRF_RADIO_MINIMUM_TIMESLOT_LENGTH_EXTENSION_TIME_US (200) - -/**@brief The maximum processing time to handle a timeslot extension. */ -#define NRF_RADIO_MAX_EXTENSION_PROCESSING_TIME_US (17) - -/**@brief The latest time before the end of a timeslot the timeslot can be extended. */ -#define NRF_RADIO_MIN_EXTENSION_MARGIN_US (79) - -#define SOC_ECB_KEY_LENGTH (16) /**< ECB key length. */ -#define SOC_ECB_CLEARTEXT_LENGTH (16) /**< ECB cleartext length. */ -#define SOC_ECB_CIPHERTEXT_LENGTH (SOC_ECB_CLEARTEXT_LENGTH) /**< ECB ciphertext length. */ - -#define SD_EVT_IRQn (SWI2_IRQn) /**< SoftDevice Event IRQ number. Used for both protocol events and SoC events. */ -#define SD_EVT_IRQHandler (SWI2_IRQHandler) /**< SoftDevice Event IRQ handler. Used for both protocol events and SoC events. - The default interrupt priority for this handler is set to 6 */ -#define RADIO_NOTIFICATION_IRQn (SWI1_IRQn) /**< The radio notification IRQ number. */ -#define RADIO_NOTIFICATION_IRQHandler (SWI1_IRQHandler) /**< The radio notification IRQ handler. - The default interrupt priority for this handler is set to 6 */ -#define NRF_RADIO_LENGTH_MIN_US (100) /**< The shortest allowed radio timeslot, in microseconds. */ -#define NRF_RADIO_LENGTH_MAX_US (100000) /**< The longest allowed radio timeslot, in microseconds. */ - -#define NRF_RADIO_DISTANCE_MAX_US (128000000UL - 1UL) /**< The longest timeslot distance, in microseconds, allowed for the distance parameter (see @ref nrf_radio_request_normal_t) in the request. */ - -#define NRF_RADIO_EARLIEST_TIMEOUT_MAX_US (128000000UL - 1UL) /**< The longest timeout, in microseconds, allowed when requesting the earliest possible timeslot. */ - -#define NRF_RADIO_START_JITTER_US (2) /**< The maximum jitter in @ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_START relative to the requested start time. */ - -/**@brief Mask of PPI channels reserved by the SoftDevice when the SoftDevice is disabled. */ -#define NRF_SOC_SD_PPI_CHANNELS_SD_DISABLED_MSK ((uint32_t)(0)) - -/**@brief Mask of PPI channels reserved by the SoftDevice when the SoftDevice is enabled. */ -#define NRF_SOC_SD_PPI_CHANNELS_SD_ENABLED_MSK ((uint32_t)( \ - (1U << 17) \ - | (1U << 18) \ - | (1U << 19) \ - | (1U << 20) \ - | (1U << 21) \ - | (1U << 22) \ - | (1U << 23) \ - | (1U << 24) \ - | (1U << 25) \ - | (1U << 26) \ - | (1U << 27) \ - | (1U << 28) \ - | (1U << 29) \ - | (1U << 30) \ - | (1U << 31) \ - )) - -/**@brief Mask of PPI channels available to the application when the SoftDevice is disabled. */ -#define NRF_SOC_APP_PPI_CHANNELS_SD_DISABLED_MSK (~NRF_SOC_SD_PPI_CHANNELS_SD_DISABLED_MSK) - -/**@brief Mask of PPI channels available to the application when the SoftDevice is enabled. */ -#define NRF_SOC_APP_PPI_CHANNELS_SD_ENABLED_MSK (~NRF_SOC_SD_PPI_CHANNELS_SD_ENABLED_MSK) - -/**@brief Mask of PPI groups reserved by the SoftDevice when the SoftDevice is disabled. */ -#define NRF_SOC_SD_PPI_GROUPS_SD_DISABLED_MSK ((uint32_t)(0)) - -/**@brief Mask of PPI groups reserved by the SoftDevice when the SoftDevice is enabled. */ -#define NRF_SOC_SD_PPI_GROUPS_SD_ENABLED_MSK ((uint32_t)( \ - (1U << 4) \ - | (1U << 5) \ - )) - -/**@brief Mask of PPI groups available to the application when the SoftDevice is disabled. */ -#define NRF_SOC_APP_PPI_GROUPS_SD_DISABLED_MSK (~NRF_SOC_SD_PPI_GROUPS_SD_DISABLED_MSK) - -/**@brief Mask of PPI groups available to the application when the SoftDevice is enabled. */ -#define NRF_SOC_APP_PPI_GROUPS_SD_ENABLED_MSK (~NRF_SOC_SD_PPI_GROUPS_SD_ENABLED_MSK) - -/**@} */ - -/**@addtogroup NRF_SOC_ENUMS Enumerations - * @{ */ - -/**@brief The SVC numbers used by the SVC functions in the SoC library. */ -enum NRF_SOC_SVCS -{ - SD_PPI_CHANNEL_ENABLE_GET = SOC_SVC_BASE, - SD_PPI_CHANNEL_ENABLE_SET = SOC_SVC_BASE + 1, - SD_PPI_CHANNEL_ENABLE_CLR = SOC_SVC_BASE + 2, - SD_PPI_CHANNEL_ASSIGN = SOC_SVC_BASE + 3, - SD_PPI_GROUP_TASK_ENABLE = SOC_SVC_BASE + 4, - SD_PPI_GROUP_TASK_DISABLE = SOC_SVC_BASE + 5, - SD_PPI_GROUP_ASSIGN = SOC_SVC_BASE + 6, - SD_PPI_GROUP_GET = SOC_SVC_BASE + 7, - SD_FLASH_PAGE_ERASE = SOC_SVC_BASE + 8, - SD_FLASH_WRITE = SOC_SVC_BASE + 9, - SD_PROTECTED_REGISTER_WRITE = SOC_SVC_BASE + 11, - SD_MUTEX_NEW = SOC_SVC_BASE_NOT_AVAILABLE, - SD_MUTEX_ACQUIRE = SOC_SVC_BASE_NOT_AVAILABLE + 1, - SD_MUTEX_RELEASE = SOC_SVC_BASE_NOT_AVAILABLE + 2, - SD_RAND_APPLICATION_POOL_CAPACITY_GET = SOC_SVC_BASE_NOT_AVAILABLE + 3, - SD_RAND_APPLICATION_BYTES_AVAILABLE_GET = SOC_SVC_BASE_NOT_AVAILABLE + 4, - SD_RAND_APPLICATION_VECTOR_GET = SOC_SVC_BASE_NOT_AVAILABLE + 5, - SD_POWER_MODE_SET = SOC_SVC_BASE_NOT_AVAILABLE + 6, - SD_POWER_SYSTEM_OFF = SOC_SVC_BASE_NOT_AVAILABLE + 7, - SD_POWER_RESET_REASON_GET = SOC_SVC_BASE_NOT_AVAILABLE + 8, - SD_POWER_RESET_REASON_CLR = SOC_SVC_BASE_NOT_AVAILABLE + 9, - SD_POWER_POF_ENABLE = SOC_SVC_BASE_NOT_AVAILABLE + 10, - SD_POWER_POF_THRESHOLD_SET = SOC_SVC_BASE_NOT_AVAILABLE + 11, - SD_POWER_POF_THRESHOLDVDDH_SET = SOC_SVC_BASE_NOT_AVAILABLE + 12, - SD_POWER_RAM_POWER_SET = SOC_SVC_BASE_NOT_AVAILABLE + 13, - SD_POWER_RAM_POWER_CLR = SOC_SVC_BASE_NOT_AVAILABLE + 14, - SD_POWER_RAM_POWER_GET = SOC_SVC_BASE_NOT_AVAILABLE + 15, - SD_POWER_GPREGRET_SET = SOC_SVC_BASE_NOT_AVAILABLE + 16, - SD_POWER_GPREGRET_CLR = SOC_SVC_BASE_NOT_AVAILABLE + 17, - SD_POWER_GPREGRET_GET = SOC_SVC_BASE_NOT_AVAILABLE + 18, - SD_POWER_DCDC_MODE_SET = SOC_SVC_BASE_NOT_AVAILABLE + 19, - SD_POWER_DCDC0_MODE_SET = SOC_SVC_BASE_NOT_AVAILABLE + 20, - SD_APP_EVT_WAIT = SOC_SVC_BASE_NOT_AVAILABLE + 21, - SD_CLOCK_HFCLK_REQUEST = SOC_SVC_BASE_NOT_AVAILABLE + 22, - SD_CLOCK_HFCLK_RELEASE = SOC_SVC_BASE_NOT_AVAILABLE + 23, - SD_CLOCK_HFCLK_IS_RUNNING = SOC_SVC_BASE_NOT_AVAILABLE + 24, - SD_RADIO_NOTIFICATION_CFG_SET = SOC_SVC_BASE_NOT_AVAILABLE + 25, - SD_ECB_BLOCK_ENCRYPT = SOC_SVC_BASE_NOT_AVAILABLE + 26, - SD_ECB_BLOCKS_ENCRYPT = SOC_SVC_BASE_NOT_AVAILABLE + 27, - SD_RADIO_SESSION_OPEN = SOC_SVC_BASE_NOT_AVAILABLE + 28, - SD_RADIO_SESSION_CLOSE = SOC_SVC_BASE_NOT_AVAILABLE + 29, - SD_RADIO_REQUEST = SOC_SVC_BASE_NOT_AVAILABLE + 30, - SD_EVT_GET = SOC_SVC_BASE_NOT_AVAILABLE + 31, - SD_TEMP_GET = SOC_SVC_BASE_NOT_AVAILABLE + 32, - SD_POWER_USBPWRRDY_ENABLE = SOC_SVC_BASE_NOT_AVAILABLE + 33, - SD_POWER_USBDETECTED_ENABLE = SOC_SVC_BASE_NOT_AVAILABLE + 34, - SD_POWER_USBREMOVED_ENABLE = SOC_SVC_BASE_NOT_AVAILABLE + 35, - SD_POWER_USBREGSTATUS_GET = SOC_SVC_BASE_NOT_AVAILABLE + 36, - SVC_SOC_LAST = SOC_SVC_BASE_NOT_AVAILABLE + 37 -}; - -/**@brief Possible values of a ::nrf_mutex_t. */ -enum NRF_MUTEX_VALUES -{ - NRF_MUTEX_FREE, - NRF_MUTEX_TAKEN -}; - -/**@brief Power modes. */ -enum NRF_POWER_MODES -{ - NRF_POWER_MODE_CONSTLAT, /**< Constant latency mode. See power management in the reference manual. */ - NRF_POWER_MODE_LOWPWR /**< Low power mode. See power management in the reference manual. */ -}; - - -/**@brief Power failure thresholds */ -enum NRF_POWER_THRESHOLDS -{ - NRF_POWER_THRESHOLD_V17 = 4UL, /**< 1.7 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V18, /**< 1.8 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V19, /**< 1.9 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V20, /**< 2.0 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V21, /**< 2.1 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V22, /**< 2.2 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V23, /**< 2.3 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V24, /**< 2.4 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V25, /**< 2.5 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V26, /**< 2.6 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V27, /**< 2.7 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V28 /**< 2.8 Volts power failure threshold. */ -}; - -/**@brief Power failure thresholds for high voltage */ -enum NRF_POWER_THRESHOLDVDDHS -{ - NRF_POWER_THRESHOLDVDDH_V27, /**< 2.7 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V28, /**< 2.8 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V29, /**< 2.9 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V30, /**< 3.0 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V31, /**< 3.1 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V32, /**< 3.2 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V33, /**< 3.3 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V34, /**< 3.4 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V35, /**< 3.5 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V36, /**< 3.6 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V37, /**< 3.7 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V38, /**< 3.8 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V39, /**< 3.9 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V40, /**< 4.0 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V41, /**< 4.1 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V42 /**< 4.2 Volts power failure threshold. */ -}; - - -/**@brief DC/DC converter modes. */ -enum NRF_POWER_DCDC_MODES -{ - NRF_POWER_DCDC_DISABLE, /**< The DCDC is disabled. */ - NRF_POWER_DCDC_ENABLE /**< The DCDC is enabled. */ -}; - -/**@brief Radio notification distances. */ -enum NRF_RADIO_NOTIFICATION_DISTANCES -{ - NRF_RADIO_NOTIFICATION_DISTANCE_NONE = 0, /**< The event does not have a notification. */ - NRF_RADIO_NOTIFICATION_DISTANCE_800US, /**< The distance from the active notification to start of radio activity. */ - NRF_RADIO_NOTIFICATION_DISTANCE_1740US, /**< The distance from the active notification to start of radio activity. */ - NRF_RADIO_NOTIFICATION_DISTANCE_2680US, /**< The distance from the active notification to start of radio activity. */ - NRF_RADIO_NOTIFICATION_DISTANCE_3620US, /**< The distance from the active notification to start of radio activity. */ - NRF_RADIO_NOTIFICATION_DISTANCE_4560US, /**< The distance from the active notification to start of radio activity. */ - NRF_RADIO_NOTIFICATION_DISTANCE_5500US /**< The distance from the active notification to start of radio activity. */ -}; - - -/**@brief Radio notification types. */ -enum NRF_RADIO_NOTIFICATION_TYPES -{ - NRF_RADIO_NOTIFICATION_TYPE_NONE = 0, /**< The event does not have a radio notification signal. */ - NRF_RADIO_NOTIFICATION_TYPE_INT_ON_ACTIVE, /**< Using interrupt for notification when the radio will be enabled. */ - NRF_RADIO_NOTIFICATION_TYPE_INT_ON_INACTIVE, /**< Using interrupt for notification when the radio has been disabled. */ - NRF_RADIO_NOTIFICATION_TYPE_INT_ON_BOTH, /**< Using interrupt for notification both when the radio will be enabled and disabled. */ -}; - -/**@brief The Radio signal callback types. */ -enum NRF_RADIO_CALLBACK_SIGNAL_TYPE -{ - NRF_RADIO_CALLBACK_SIGNAL_TYPE_START, /**< This signal indicates the start of the radio timeslot. */ - NRF_RADIO_CALLBACK_SIGNAL_TYPE_TIMER0, /**< This signal indicates the NRF_TIMER0 interrupt. */ - NRF_RADIO_CALLBACK_SIGNAL_TYPE_RADIO, /**< This signal indicates the NRF_RADIO interrupt. */ - NRF_RADIO_CALLBACK_SIGNAL_TYPE_EXTEND_FAILED, /**< This signal indicates extend action failed. */ - NRF_RADIO_CALLBACK_SIGNAL_TYPE_EXTEND_SUCCEEDED /**< This signal indicates extend action succeeded. */ -}; - -/**@brief The actions requested by the signal callback. - * - * This code gives the SOC instructions about what action to take when the signal callback has - * returned. - */ -enum NRF_RADIO_SIGNAL_CALLBACK_ACTION -{ - NRF_RADIO_SIGNAL_CALLBACK_ACTION_NONE, /**< Return without action. */ - NRF_RADIO_SIGNAL_CALLBACK_ACTION_EXTEND, /**< Request an extension of the current - timeslot. Maximum execution time for this action: - @ref NRF_RADIO_MAX_EXTENSION_PROCESSING_TIME_US. - This action must be started at least - @ref NRF_RADIO_MIN_EXTENSION_MARGIN_US before - the end of the timeslot. */ - NRF_RADIO_SIGNAL_CALLBACK_ACTION_END, /**< End the current radio timeslot. */ - NRF_RADIO_SIGNAL_CALLBACK_ACTION_REQUEST_AND_END /**< Request a new radio timeslot and end the current timeslot. */ -}; - -/**@brief Radio timeslot high frequency clock source configuration. */ -enum NRF_RADIO_HFCLK_CFG -{ - NRF_RADIO_HFCLK_CFG_XTAL_GUARANTEED, /**< The SoftDevice will guarantee that the high frequency clock source is the - external crystal for the whole duration of the timeslot. This should be the - preferred option for events that use the radio or require high timing accuracy. - @note The SoftDevice will automatically turn on and off the external crystal, - at the beginning and end of the timeslot, respectively. The crystal may also - intentionally be left running after the timeslot, in cases where it is needed - by the SoftDevice shortly after the end of the timeslot. */ - NRF_RADIO_HFCLK_CFG_NO_GUARANTEE /**< This configuration allows for earlier and tighter scheduling of timeslots. - The RC oscillator may be the clock source in part or for the whole duration of the timeslot. - The RC oscillator's accuracy must therefore be taken into consideration. - @note If the application will use the radio peripheral in timeslots with this configuration, - it must make sure that the crystal is running and stable before starting the radio. */ -}; - -/**@brief Radio timeslot priorities. */ -enum NRF_RADIO_PRIORITY -{ - NRF_RADIO_PRIORITY_HIGH, /**< High (equal priority as the normal connection priority of the SoftDevice stack(s)). */ - NRF_RADIO_PRIORITY_NORMAL, /**< Normal (equal priority as the priority of secondary activities of the SoftDevice stack(s)). */ -}; - -/**@brief Radio timeslot request type. */ -enum NRF_RADIO_REQUEST_TYPE -{ - NRF_RADIO_REQ_TYPE_EARLIEST, /**< Request radio timeslot as early as possible. This should always be used for the first request in a session. */ - NRF_RADIO_REQ_TYPE_NORMAL /**< Normal radio timeslot request. */ -}; - -/**@brief SoC Events. */ -enum NRF_SOC_EVTS -{ - NRF_EVT_HFCLKSTARTED, /**< Event indicating that the HFCLK has started. */ - NRF_EVT_POWER_FAILURE_WARNING, /**< Event indicating that a power failure warning has occurred. */ - NRF_EVT_FLASH_OPERATION_SUCCESS, /**< Event indicating that the ongoing flash operation has completed successfully. */ - NRF_EVT_FLASH_OPERATION_ERROR, /**< Event indicating that the ongoing flash operation has timed out with an error. */ - NRF_EVT_RADIO_BLOCKED, /**< Event indicating that a radio timeslot was blocked. */ - NRF_EVT_RADIO_CANCELED, /**< Event indicating that a radio timeslot was canceled by SoftDevice. */ - NRF_EVT_RADIO_SIGNAL_CALLBACK_INVALID_RETURN, /**< Event indicating that a radio timeslot signal callback handler return was invalid. */ - NRF_EVT_RADIO_SESSION_IDLE, /**< Event indicating that a radio timeslot session is idle. */ - NRF_EVT_RADIO_SESSION_CLOSED, /**< Event indicating that a radio timeslot session is closed. */ - NRF_EVT_POWER_USB_POWER_READY, /**< Event indicating that a USB 3.3 V supply is ready. */ - NRF_EVT_POWER_USB_DETECTED, /**< Event indicating that voltage supply is detected on VBUS. */ - NRF_EVT_POWER_USB_REMOVED, /**< Event indicating that voltage supply is removed from VBUS. */ - NRF_EVT_NUMBER_OF_EVTS -}; - -/**@} */ - - -/**@addtogroup NRF_SOC_STRUCTURES Structures - * @{ */ - -/**@brief Represents a mutex for use with the nrf_mutex functions. - * @note Accessing the value directly is not safe, use the mutex functions! - */ -typedef volatile uint8_t nrf_mutex_t; - -/**@brief Parameters for a request for a timeslot as early as possible. */ -typedef struct -{ - uint8_t hfclk; /**< High frequency clock source, see @ref NRF_RADIO_HFCLK_CFG. */ - uint8_t priority; /**< The radio timeslot priority, see @ref NRF_RADIO_PRIORITY. */ - uint32_t length_us; /**< The radio timeslot length (in the range 100 to 100,000] microseconds). */ - uint32_t timeout_us; /**< Longest acceptable delay until the start of the requested timeslot (up to @ref NRF_RADIO_EARLIEST_TIMEOUT_MAX_US microseconds). */ -} nrf_radio_request_earliest_t; - -/**@brief Parameters for a normal radio timeslot request. */ -typedef struct -{ - uint8_t hfclk; /**< High frequency clock source, see @ref NRF_RADIO_HFCLK_CFG. */ - uint8_t priority; /**< The radio timeslot priority, see @ref NRF_RADIO_PRIORITY. */ - uint32_t distance_us; /**< Distance from the start of the previous radio timeslot (up to @ref NRF_RADIO_DISTANCE_MAX_US microseconds). */ - uint32_t length_us; /**< The radio timeslot length (in the range [100..100,000] microseconds). */ -} nrf_radio_request_normal_t; - -/**@brief Radio timeslot request parameters. */ -typedef struct -{ - uint8_t request_type; /**< Type of request, see @ref NRF_RADIO_REQUEST_TYPE. */ - union - { - nrf_radio_request_earliest_t earliest; /**< Parameters for requesting a radio timeslot as early as possible. */ - nrf_radio_request_normal_t normal; /**< Parameters for requesting a normal radio timeslot. */ - } params; /**< Parameter union. */ -} nrf_radio_request_t; - -/**@brief Return parameters of the radio timeslot signal callback. */ -typedef struct -{ - uint8_t callback_action; /**< The action requested by the application when returning from the signal callback, see @ref NRF_RADIO_SIGNAL_CALLBACK_ACTION. */ - union - { - struct - { - nrf_radio_request_t * p_next; /**< The request parameters for the next radio timeslot. */ - } request; /**< Additional parameters for return_code @ref NRF_RADIO_SIGNAL_CALLBACK_ACTION_REQUEST_AND_END. */ - struct - { - uint32_t length_us; /**< Requested extension of the radio timeslot duration (microseconds) (for minimum time see @ref NRF_RADIO_MINIMUM_TIMESLOT_LENGTH_EXTENSION_TIME_US). */ - } extend; /**< Additional parameters for return_code @ref NRF_RADIO_SIGNAL_CALLBACK_ACTION_EXTEND. */ - } params; /**< Parameter union. */ -} nrf_radio_signal_callback_return_param_t; - -/**@brief The radio timeslot signal callback type. - * - * @note In case of invalid return parameters, the radio timeslot will automatically end - * immediately after returning from the signal callback and the - * @ref NRF_EVT_RADIO_SIGNAL_CALLBACK_INVALID_RETURN event will be sent. - * @note The returned struct pointer must remain valid after the signal callback - * function returns. For instance, this means that it must not point to a stack variable. - * - * @param[in] signal_type Type of signal, see @ref NRF_RADIO_CALLBACK_SIGNAL_TYPE. - * - * @return Pointer to structure containing action requested by the application. - */ -typedef nrf_radio_signal_callback_return_param_t * (*nrf_radio_signal_callback_t) (uint8_t signal_type); - -/**@brief AES ECB parameter typedefs */ -typedef uint8_t soc_ecb_key_t[SOC_ECB_KEY_LENGTH]; /**< Encryption key type. */ -typedef uint8_t soc_ecb_cleartext_t[SOC_ECB_CLEARTEXT_LENGTH]; /**< Cleartext data type. */ -typedef uint8_t soc_ecb_ciphertext_t[SOC_ECB_CIPHERTEXT_LENGTH]; /**< Ciphertext data type. */ - -/**@brief AES ECB data structure */ -typedef struct -{ - soc_ecb_key_t key; /**< Encryption key. */ - soc_ecb_cleartext_t cleartext; /**< Cleartext data. */ - soc_ecb_ciphertext_t ciphertext; /**< Ciphertext data. */ -} nrf_ecb_hal_data_t; - -/**@brief AES ECB block. Used to provide multiple blocks in a single call - to @ref sd_ecb_blocks_encrypt.*/ -typedef struct -{ - soc_ecb_key_t const * p_key; /**< Pointer to the Encryption key. */ - soc_ecb_cleartext_t const * p_cleartext; /**< Pointer to the Cleartext data. */ - soc_ecb_ciphertext_t * p_ciphertext; /**< Pointer to the Ciphertext data. */ -} nrf_ecb_hal_data_block_t; - -/**@} */ - -/**@addtogroup NRF_SOC_FUNCTIONS Functions - * @{ */ - -/**@brief Initialize a mutex. - * - * @param[in] p_mutex Pointer to the mutex to initialize. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_MUTEX_NEW, uint32_t, sd_mutex_new(nrf_mutex_t * p_mutex)); - -/**@brief Attempt to acquire a mutex. - * - * @param[in] p_mutex Pointer to the mutex to acquire. - * - * @retval ::NRF_SUCCESS The mutex was successfully acquired. - * @retval ::NRF_ERROR_SOC_MUTEX_ALREADY_TAKEN The mutex could not be acquired. - */ -SVCALL(SD_MUTEX_ACQUIRE, uint32_t, sd_mutex_acquire(nrf_mutex_t * p_mutex)); - -/**@brief Release a mutex. - * - * @param[in] p_mutex Pointer to the mutex to release. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_MUTEX_RELEASE, uint32_t, sd_mutex_release(nrf_mutex_t * p_mutex)); - -/**@brief Query the capacity of the application random pool. - * - * @param[out] p_pool_capacity The capacity of the pool. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_RAND_APPLICATION_POOL_CAPACITY_GET, uint32_t, sd_rand_application_pool_capacity_get(uint8_t * p_pool_capacity)); - -/**@brief Get number of random bytes available to the application. - * - * @param[out] p_bytes_available The number of bytes currently available in the pool. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_RAND_APPLICATION_BYTES_AVAILABLE_GET, uint32_t, sd_rand_application_bytes_available_get(uint8_t * p_bytes_available)); - -/**@brief Get random bytes from the application pool. - * - * @param[out] p_buff Pointer to unit8_t buffer for storing the bytes. - * @param[in] length Number of bytes to take from pool and place in p_buff. - * - * @retval ::NRF_SUCCESS The requested bytes were written to p_buff. - * @retval ::NRF_ERROR_SOC_RAND_NOT_ENOUGH_VALUES No bytes were written to the buffer, because there were not enough bytes available. -*/ -SVCALL(SD_RAND_APPLICATION_VECTOR_GET, uint32_t, sd_rand_application_vector_get(uint8_t * p_buff, uint8_t length)); - -/**@brief Gets the reset reason register. - * - * @param[out] p_reset_reason Contents of the NRF_POWER->RESETREAS register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_RESET_REASON_GET, uint32_t, sd_power_reset_reason_get(uint32_t * p_reset_reason)); - -/**@brief Clears the bits of the reset reason register. - * - * @param[in] reset_reason_clr_msk Contains the bits to clear from the reset reason register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_RESET_REASON_CLR, uint32_t, sd_power_reset_reason_clr(uint32_t reset_reason_clr_msk)); - -/**@brief Sets the power mode when in CPU sleep. - * - * @param[in] power_mode The power mode to use when in CPU sleep, see @ref NRF_POWER_MODES. @sa sd_app_evt_wait - * - * @retval ::NRF_SUCCESS The power mode was set. - * @retval ::NRF_ERROR_SOC_POWER_MODE_UNKNOWN The power mode was unknown. - */ -SVCALL(SD_POWER_MODE_SET, uint32_t, sd_power_mode_set(uint8_t power_mode)); - -/**@brief Puts the chip in System OFF mode. - * - * @retval ::NRF_ERROR_SOC_POWER_OFF_SHOULD_NOT_RETURN - */ -SVCALL(SD_POWER_SYSTEM_OFF, uint32_t, sd_power_system_off(void)); - -/**@brief Enables or disables the power-fail comparator. - * - * Enabling this will give a SoftDevice event (NRF_EVT_POWER_FAILURE_WARNING) when the power failure warning occurs. - * The event can be retrieved with sd_evt_get(); - * - * @param[in] pof_enable True if the power-fail comparator should be enabled, false if it should be disabled. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_POF_ENABLE, uint32_t, sd_power_pof_enable(uint8_t pof_enable)); - -/**@brief Enables or disables the USB power ready event. - * - * Enabling this will give a SoftDevice event (NRF_EVT_POWER_USB_POWER_READY) when a USB 3.3 V supply is ready. - * The event can be retrieved with sd_evt_get(); - * - * @param[in] usbpwrrdy_enable True if the power ready event should be enabled, false if it should be disabled. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_USBPWRRDY_ENABLE, uint32_t, sd_power_usbpwrrdy_enable(uint8_t usbpwrrdy_enable)); - -/**@brief Enables or disables the power USB-detected event. - * - * Enabling this will give a SoftDevice event (NRF_EVT_POWER_USB_DETECTED) when a voltage supply is detected on VBUS. - * The event can be retrieved with sd_evt_get(); - * - * @param[in] usbdetected_enable True if the power ready event should be enabled, false if it should be disabled. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_USBDETECTED_ENABLE, uint32_t, sd_power_usbdetected_enable(uint8_t usbdetected_enable)); - -/**@brief Enables or disables the power USB-removed event. - * - * Enabling this will give a SoftDevice event (NRF_EVT_POWER_USB_REMOVED) when a voltage supply is removed from VBUS. - * The event can be retrieved with sd_evt_get(); - * - * @param[in] usbremoved_enable True if the power ready event should be enabled, false if it should be disabled. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_USBREMOVED_ENABLE, uint32_t, sd_power_usbremoved_enable(uint8_t usbremoved_enable)); - -/**@brief Get USB supply status register content. - * - * @param[out] usbregstatus The content of USBREGSTATUS register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_USBREGSTATUS_GET, uint32_t, sd_power_usbregstatus_get(uint32_t * usbregstatus)); - -/**@brief Sets the power failure comparator threshold value. - * - * @note: Power failure comparator threshold setting. This setting applies both for normal voltage - * mode (supply connected to both VDD and VDDH) and high voltage mode (supply connected to - * VDDH only). - * - * @param[in] threshold The power-fail threshold value to use, see @ref NRF_POWER_THRESHOLDS. - * - * @retval ::NRF_SUCCESS The power failure threshold was set. - * @retval ::NRF_ERROR_SOC_POWER_POF_THRESHOLD_UNKNOWN The power failure threshold is unknown. - */ -SVCALL(SD_POWER_POF_THRESHOLD_SET, uint32_t, sd_power_pof_threshold_set(uint8_t threshold)); - -/**@brief Sets the power failure comparator threshold value for high voltage. - * - * @note: Power failure comparator threshold setting for high voltage mode (supply connected to - * VDDH only). This setting does not apply for normal voltage mode (supply connected to both - * VDD and VDDH). - * - * @param[in] threshold The power-fail threshold value to use, see @ref NRF_POWER_THRESHOLDVDDHS. - * - * @retval ::NRF_SUCCESS The power failure threshold was set. - * @retval ::NRF_ERROR_SOC_POWER_POF_THRESHOLD_UNKNOWN The power failure threshold is unknown. - */ -SVCALL(SD_POWER_POF_THRESHOLDVDDH_SET, uint32_t, sd_power_pof_thresholdvddh_set(uint8_t threshold)); - -/**@brief Writes the NRF_POWER->RAM[index].POWERSET register. - * - * @param[in] index Contains the index in the NRF_POWER->RAM[index].POWERSET register to write to. - * @param[in] ram_powerset Contains the word to write to the NRF_POWER->RAM[index].POWERSET register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_RAM_POWER_SET, uint32_t, sd_power_ram_power_set(uint8_t index, uint32_t ram_powerset)); - -/**@brief Writes the NRF_POWER->RAM[index].POWERCLR register. - * - * @param[in] index Contains the index in the NRF_POWER->RAM[index].POWERCLR register to write to. - * @param[in] ram_powerclr Contains the word to write to the NRF_POWER->RAM[index].POWERCLR register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_RAM_POWER_CLR, uint32_t, sd_power_ram_power_clr(uint8_t index, uint32_t ram_powerclr)); - -/**@brief Get contents of NRF_POWER->RAM[index].POWER register, indicates power status of RAM[index] blocks. - * - * @param[in] index Contains the index in the NRF_POWER->RAM[index].POWER register to read from. - * @param[out] p_ram_power Content of NRF_POWER->RAM[index].POWER register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_RAM_POWER_GET, uint32_t, sd_power_ram_power_get(uint8_t index, uint32_t * p_ram_power)); - -/**@brief Set bits in the general purpose retention registers (NRF_POWER->GPREGRET*). - * - * @param[in] gpregret_id 0 for GPREGRET, 1 for GPREGRET2. - * @param[in] gpregret_msk Bits to be set in the GPREGRET register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_GPREGRET_SET, uint32_t, sd_power_gpregret_set(uint32_t gpregret_id, uint32_t gpregret_msk)); - -/**@brief Clear bits in the general purpose retention registers (NRF_POWER->GPREGRET*). - * - * @param[in] gpregret_id 0 for GPREGRET, 1 for GPREGRET2. - * @param[in] gpregret_msk Bits to be clear in the GPREGRET register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_GPREGRET_CLR, uint32_t, sd_power_gpregret_clr(uint32_t gpregret_id, uint32_t gpregret_msk)); - -/**@brief Get contents of the general purpose retention registers (NRF_POWER->GPREGRET*). - * - * @param[in] gpregret_id 0 for GPREGRET, 1 for GPREGRET2. - * @param[out] p_gpregret Contents of the GPREGRET register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_GPREGRET_GET, uint32_t, sd_power_gpregret_get(uint32_t gpregret_id, uint32_t *p_gpregret)); - -/**@brief Enable or disable the DC/DC regulator for the regulator stage 1 (REG1). - * - * @param[in] dcdc_mode The mode of the DCDC, see @ref NRF_POWER_DCDC_MODES. - * - * @retval ::NRF_SUCCESS - * @retval ::NRF_ERROR_INVALID_PARAM The DCDC mode is invalid. - */ -SVCALL(SD_POWER_DCDC_MODE_SET, uint32_t, sd_power_dcdc_mode_set(uint8_t dcdc_mode)); - -/**@brief Enable or disable the DC/DC regulator for the regulator stage 0 (REG0). - * - * For more details on the REG0 stage, please see product specification. - * - * @param[in] dcdc_mode The mode of the DCDC0, see @ref NRF_POWER_DCDC_MODES. - * - * @retval ::NRF_SUCCESS - * @retval ::NRF_ERROR_INVALID_PARAM The dcdc_mode is invalid. - */ -SVCALL(SD_POWER_DCDC0_MODE_SET, uint32_t, sd_power_dcdc0_mode_set(uint8_t dcdc_mode)); - -/**@brief Request the high frequency crystal oscillator. - * - * Will start the high frequency crystal oscillator, the startup time of the crystal varies - * and the ::sd_clock_hfclk_is_running function can be polled to check if it has started. - * - * @see sd_clock_hfclk_is_running - * @see sd_clock_hfclk_release - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_CLOCK_HFCLK_REQUEST, uint32_t, sd_clock_hfclk_request(void)); - -/**@brief Releases the high frequency crystal oscillator. - * - * Will stop the high frequency crystal oscillator, this happens immediately. - * - * @see sd_clock_hfclk_is_running - * @see sd_clock_hfclk_request - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_CLOCK_HFCLK_RELEASE, uint32_t, sd_clock_hfclk_release(void)); - -/**@brief Checks if the high frequency crystal oscillator is running. - * - * @see sd_clock_hfclk_request - * @see sd_clock_hfclk_release - * - * @param[out] p_is_running 1 if the external crystal oscillator is running, 0 if not. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_CLOCK_HFCLK_IS_RUNNING, uint32_t, sd_clock_hfclk_is_running(uint32_t * p_is_running)); - -/**@brief Waits for an application event. - * - * An application event is either an application interrupt or a pended interrupt when the interrupt - * is disabled. - * - * When the application waits for an application event by calling this function, an interrupt that - * is enabled will be taken immediately on pending since this function will wait in thread mode, - * then the execution will return in the application's main thread. - * - * In order to wake up from disabled interrupts, the SEVONPEND flag has to be set in the Cortex-M - * MCU's System Control Register (SCR), CMSIS_SCB. In that case, when a disabled interrupt gets - * pended, this function will return to the application's main thread. - * - * @note The application must ensure that the pended flag is cleared using ::sd_nvic_ClearPendingIRQ - * in order to sleep using this function. This is only necessary for disabled interrupts, as - * the interrupt handler will clear the pending flag automatically for enabled interrupts. - * - * @note If an application interrupt has happened since the last time sd_app_evt_wait was - * called this function will return immediately and not go to sleep. This is to avoid race - * conditions that can occur when a flag is updated in the interrupt handler and processed - * in the main loop. - * - * @post An application interrupt has happened or a interrupt pending flag is set. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_APP_EVT_WAIT, uint32_t, sd_app_evt_wait(void)); - -/**@brief Get PPI channel enable register contents. - * - * @param[out] p_channel_enable The contents of the PPI CHEN register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_PPI_CHANNEL_ENABLE_GET, uint32_t, sd_ppi_channel_enable_get(uint32_t * p_channel_enable)); - -/**@brief Set PPI channel enable register. - * - * @param[in] channel_enable_set_msk Mask containing the bits to set in the PPI CHEN register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_PPI_CHANNEL_ENABLE_SET, uint32_t, sd_ppi_channel_enable_set(uint32_t channel_enable_set_msk)); - -/**@brief Clear PPI channel enable register. - * - * @param[in] channel_enable_clr_msk Mask containing the bits to clear in the PPI CHEN register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_PPI_CHANNEL_ENABLE_CLR, uint32_t, sd_ppi_channel_enable_clr(uint32_t channel_enable_clr_msk)); - -/**@brief Assign endpoints to a PPI channel. - * - * @param[in] channel_num Number of the PPI channel to assign. - * @param[in] evt_endpoint Event endpoint of the PPI channel. - * @param[in] task_endpoint Task endpoint of the PPI channel. - * - * @retval ::NRF_ERROR_SOC_PPI_INVALID_CHANNEL The channel number is invalid. - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_PPI_CHANNEL_ASSIGN, uint32_t, sd_ppi_channel_assign(uint8_t channel_num, const volatile void * evt_endpoint, const volatile void * task_endpoint)); - -/**@brief Task to enable a channel group. - * - * @param[in] group_num Number of the channel group. - * - * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_PPI_GROUP_TASK_ENABLE, uint32_t, sd_ppi_group_task_enable(uint8_t group_num)); - -/**@brief Task to disable a channel group. - * - * @param[in] group_num Number of the PPI group. - * - * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid. - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_PPI_GROUP_TASK_DISABLE, uint32_t, sd_ppi_group_task_disable(uint8_t group_num)); - -/**@brief Assign PPI channels to a channel group. - * - * @param[in] group_num Number of the channel group. - * @param[in] channel_msk Mask of the channels to assign to the group. - * - * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid. - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_PPI_GROUP_ASSIGN, uint32_t, sd_ppi_group_assign(uint8_t group_num, uint32_t channel_msk)); - -/**@brief Gets the PPI channels of a channel group. - * - * @param[in] group_num Number of the channel group. - * @param[out] p_channel_msk Mask of the channels assigned to the group. - * - * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid. - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_PPI_GROUP_GET, uint32_t, sd_ppi_group_get(uint8_t group_num, uint32_t * p_channel_msk)); - -/**@brief Configures the Radio Notification signal. - * - * @note - * - The notification signal latency depends on the interrupt priority settings of SWI used - * for notification signal. - * - To ensure that the radio notification signal behaves in a consistent way, the radio - * notifications must be configured when there is no protocol stack or other SoftDevice - * activity in progress. It is recommended that the radio notification signal is - * configured directly after the SoftDevice has been enabled. - * - In the period between the ACTIVE signal and the start of the Radio Event, the SoftDevice - * will interrupt the application to do Radio Event preparation. - * - Using the Radio Notification feature may limit the bandwidth, as the SoftDevice may have - * to shorten the connection events to have time for the Radio Notification signals. - * - * @param[in] type Type of notification signal, see @ref NRF_RADIO_NOTIFICATION_TYPES. - * @ref NRF_RADIO_NOTIFICATION_TYPE_NONE shall be used to turn off radio - * notification. Using @ref NRF_RADIO_NOTIFICATION_DISTANCE_NONE is - * recommended (but not required) to be used with - * @ref NRF_RADIO_NOTIFICATION_TYPE_NONE. - * - * @param[in] distance Distance between the notification signal and start of radio activity, see @ref NRF_RADIO_NOTIFICATION_DISTANCES. - * This parameter is ignored when @ref NRF_RADIO_NOTIFICATION_TYPE_NONE or - * @ref NRF_RADIO_NOTIFICATION_TYPE_INT_ON_INACTIVE is used. - * - * @retval ::NRF_ERROR_INVALID_PARAM The group number is invalid. - * @retval ::NRF_ERROR_INVALID_STATE A protocol stack or other SoftDevice is running. Stop all - * running activities and retry. - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_RADIO_NOTIFICATION_CFG_SET, uint32_t, sd_radio_notification_cfg_set(uint8_t type, uint8_t distance)); - -/**@brief Encrypts a block according to the specified parameters. - * - * 128-bit AES encryption. - * - * @note: - * - The application may set the SEVONPEND bit in the SCR to 1 to make the SoftDevice sleep while - * the ECB is running. The SEVONPEND bit should only be cleared (set to 0) from application - * main or low interrupt level. - * - * @param[in, out] p_ecb_data Pointer to the ECB parameters' struct (two input - * parameters and one output parameter). - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_ECB_BLOCK_ENCRYPT, uint32_t, sd_ecb_block_encrypt(nrf_ecb_hal_data_t * p_ecb_data)); - -/**@brief Encrypts multiple data blocks provided as an array of data block structures. - * - * @details: Performs 128-bit AES encryption on multiple data blocks - * - * @note: - * - The application may set the SEVONPEND bit in the SCR to 1 to make the SoftDevice sleep while - * the ECB is running. The SEVONPEND bit should only be cleared (set to 0) from application - * main or low interrupt level. - * - * @param[in] block_count Count of blocks in the p_data_blocks array. - * @param[in,out] p_data_blocks Pointer to the first entry in a contiguous array of - * @ref nrf_ecb_hal_data_block_t structures. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_ECB_BLOCKS_ENCRYPT, uint32_t, sd_ecb_blocks_encrypt(uint8_t block_count, nrf_ecb_hal_data_block_t * p_data_blocks)); - -/**@brief Gets any pending events generated by the SoC API. - * - * The application should keep calling this function to get events, until ::NRF_ERROR_NOT_FOUND is returned. - * - * @param[out] p_evt_id Set to one of the values in @ref NRF_SOC_EVTS, if any events are pending. - * - * @retval ::NRF_SUCCESS An event was pending. The event id is written in the p_evt_id parameter. - * @retval ::NRF_ERROR_NOT_FOUND No pending events. - */ -SVCALL(SD_EVT_GET, uint32_t, sd_evt_get(uint32_t * p_evt_id)); - -/**@brief Get the temperature measured on the chip - * - * This function will block until the temperature measurement is done. - * It takes around 50 us from call to return. - * - * @param[out] p_temp Result of temperature measurement. Die temperature in 0.25 degrees Celsius. - * - * @retval ::NRF_SUCCESS A temperature measurement was done, and the temperature was written to temp - */ -SVCALL(SD_TEMP_GET, uint32_t, sd_temp_get(int32_t * p_temp)); - -/**@brief Flash Write -* -* Commands to write a buffer to flash -* -* If the SoftDevice is enabled: -* This call initiates the flash access command, and its completion will be communicated to the -* application with exactly one of the following events: -* - @ref NRF_EVT_FLASH_OPERATION_SUCCESS - The command was successfully completed. -* - @ref NRF_EVT_FLASH_OPERATION_ERROR - The command could not be started. -* -* If the SoftDevice is not enabled no event will be generated, and this call will return @ref NRF_SUCCESS when the - * write has been completed -* -* @note -* - This call takes control over the radio and the CPU during flash erase and write to make sure that -* they will not interfere with the flash access. This means that all interrupts will be blocked -* for a predictable time (depending on the NVMC specification in the device's Product Specification -* and the command parameters). -* - The data in the p_src buffer should not be modified before the @ref NRF_EVT_FLASH_OPERATION_SUCCESS -* or the @ref NRF_EVT_FLASH_OPERATION_ERROR have been received if the SoftDevice is enabled. -* - This call will make the SoftDevice trigger a hardfault when the page is written, if it is -* protected. -* -* -* @param[in] p_dst Pointer to start of flash location to be written. -* @param[in] p_src Pointer to buffer with data to be written. -* @param[in] size Number of 32-bit words to write. Maximum size is the number of words in one -* flash page. See the device's Product Specification for details. -* -* @retval ::NRF_ERROR_INVALID_ADDR Tried to write to a non existing flash address, or p_dst or p_src was unaligned. -* @retval ::NRF_ERROR_BUSY The previous command has not yet completed. -* @retval ::NRF_ERROR_INVALID_LENGTH Size was 0, or higher than the maximum allowed size. -* @retval ::NRF_ERROR_FORBIDDEN Tried to write to an address outside the application flash area. -* @retval ::NRF_SUCCESS The command was accepted. -*/ -SVCALL(SD_FLASH_WRITE, uint32_t, sd_flash_write(uint32_t * p_dst, uint32_t const * p_src, uint32_t size)); - - -/**@brief Flash Erase page -* -* Commands to erase a flash page -* If the SoftDevice is enabled: -* This call initiates the flash access command, and its completion will be communicated to the -* application with exactly one of the following events: -* - @ref NRF_EVT_FLASH_OPERATION_SUCCESS - The command was successfully completed. -* - @ref NRF_EVT_FLASH_OPERATION_ERROR - The command could not be started. -* -* If the SoftDevice is not enabled no event will be generated, and this call will return @ref NRF_SUCCESS when the -* erase has been completed -* -* @note -* - This call takes control over the radio and the CPU during flash erase and write to make sure that -* they will not interfere with the flash access. This means that all interrupts will be blocked -* for a predictable time (depending on the NVMC specification in the device's Product Specification -* and the command parameters). -* - This call will make the SoftDevice trigger a hardfault when the page is erased, if it is -* protected. -* -* -* @param[in] page_number Page number of the page to erase -* -* @retval ::NRF_ERROR_INTERNAL If a new session could not be opened due to an internal error. -* @retval ::NRF_ERROR_INVALID_ADDR Tried to erase to a non existing flash page. -* @retval ::NRF_ERROR_BUSY The previous command has not yet completed. -* @retval ::NRF_ERROR_FORBIDDEN Tried to erase a page outside the application flash area. -* @retval ::NRF_SUCCESS The command was accepted. -*/ -SVCALL(SD_FLASH_PAGE_ERASE, uint32_t, sd_flash_page_erase(uint32_t page_number)); - - - -/**@brief Opens a session for radio timeslot requests. - * - * @note Only one session can be open at a time. - * @note p_radio_signal_callback(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_START) will be called when the radio timeslot - * starts. From this point the NRF_RADIO and NRF_TIMER0 peripherals can be freely accessed - * by the application. - * @note p_radio_signal_callback(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_TIMER0) is called whenever the NRF_TIMER0 - * interrupt occurs. - * @note p_radio_signal_callback(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_RADIO) is called whenever the NRF_RADIO - * interrupt occurs. - * @note p_radio_signal_callback() will be called at ARM interrupt priority level 0. This - * implies that none of the sd_* API calls can be used from p_radio_signal_callback(). - * - * @param[in] p_radio_signal_callback The signal callback. - * - * @retval ::NRF_ERROR_INVALID_ADDR p_radio_signal_callback is an invalid function pointer. - * @retval ::NRF_ERROR_BUSY If session cannot be opened. - * @retval ::NRF_ERROR_INTERNAL If a new session could not be opened due to an internal error. - * @retval ::NRF_SUCCESS Otherwise. - */ - SVCALL(SD_RADIO_SESSION_OPEN, uint32_t, sd_radio_session_open(nrf_radio_signal_callback_t p_radio_signal_callback)); - -/**@brief Closes a session for radio timeslot requests. - * - * @note Any current radio timeslot will be finished before the session is closed. - * @note If a radio timeslot is scheduled when the session is closed, it will be canceled. - * @note The application cannot consider the session closed until the @ref NRF_EVT_RADIO_SESSION_CLOSED - * event is received. - * - * @retval ::NRF_ERROR_FORBIDDEN If session not opened. - * @retval ::NRF_ERROR_BUSY If session is currently being closed. - * @retval ::NRF_SUCCESS Otherwise. - */ - SVCALL(SD_RADIO_SESSION_CLOSE, uint32_t, sd_radio_session_close(void)); - -/**@brief Requests a radio timeslot. - * - * @note The request type is determined by p_request->request_type, and can be one of @ref NRF_RADIO_REQ_TYPE_EARLIEST - * and @ref NRF_RADIO_REQ_TYPE_NORMAL. The first request in a session must always be of type @ref NRF_RADIO_REQ_TYPE_EARLIEST. - * @note For a normal request (@ref NRF_RADIO_REQ_TYPE_NORMAL), the start time of a radio timeslot is specified by - * p_request->distance_us and is given relative to the start of the previous timeslot. - * @note A too small p_request->distance_us will lead to a @ref NRF_EVT_RADIO_BLOCKED event. - * @note Timeslots scheduled too close will lead to a @ref NRF_EVT_RADIO_BLOCKED event. - * @note See the SoftDevice Specification for more on radio timeslot scheduling, distances and lengths. - * @note If an opportunity for the first radio timeslot is not found before 100 ms after the call to this - * function, it is not scheduled, and instead a @ref NRF_EVT_RADIO_BLOCKED event is sent. - * The application may then try to schedule the first radio timeslot again. - * @note Successful requests will result in nrf_radio_signal_callback_t(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_START). - * Unsuccessful requests will result in a @ref NRF_EVT_RADIO_BLOCKED event, see @ref NRF_SOC_EVTS. - * @note The jitter in the start time of the radio timeslots is +/- @ref NRF_RADIO_START_JITTER_US us. - * @note The nrf_radio_signal_callback_t(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_START) call has a latency relative to the - * specified radio timeslot start, but this does not affect the actual start time of the timeslot. - * @note NRF_TIMER0 is reset at the start of the radio timeslot, and is clocked at 1MHz from the high frequency - * (16 MHz) clock source. If p_request->hfclk_force_xtal is true, the high frequency clock is - * guaranteed to be clocked from the external crystal. - * @note The SoftDevice will neither access the NRF_RADIO peripheral nor the NRF_TIMER0 peripheral - * during the radio timeslot. - * - * @param[in] p_request Pointer to the request parameters. - * - * @retval ::NRF_ERROR_FORBIDDEN If session not opened or the session is not IDLE. - * @retval ::NRF_ERROR_INVALID_ADDR If the p_request pointer is invalid. - * @retval ::NRF_ERROR_INVALID_PARAM If the parameters of p_request are not valid. - * @retval ::NRF_SUCCESS Otherwise. - */ - SVCALL(SD_RADIO_REQUEST, uint32_t, sd_radio_request(nrf_radio_request_t const * p_request)); - -/**@brief Write register protected by the SoftDevice - * - * This function writes to a register that is write-protected by the SoftDevice. Please refer to your - * SoftDevice Specification for more details about which registers that are protected by SoftDevice. - * This function can write to the following protected peripheral: - * - ACL - * - * @note Protected registers may be read directly. - * @note Register that are write-once will return @ref NRF_SUCCESS on second set, even the value in - * the register has not changed. See the Product Specification for more details about register - * properties. - * - * @param[in] p_register Pointer to register to be written. - * @param[in] value Value to be written to the register. - * - * @retval ::NRF_ERROR_INVALID_ADDR This function can not write to the reguested register. - * @retval ::NRF_SUCCESS Value successfully written to register. - * - */ -SVCALL(SD_PROTECTED_REGISTER_WRITE, uint32_t, sd_protected_register_write(volatile uint32_t * p_register, uint32_t value)); - -/**@} */ - -#ifdef __cplusplus -} -#endif -#endif // NRF_SOC_H__ - -/**@} */ |