diff options
Diffstat (limited to 'tinyusb/hw/mcu/nordic')
21 files changed, 0 insertions, 9195 deletions
diff --git a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble.h b/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble.h deleted file mode 100755 index 76a432bf..00000000 --- a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble.h +++ /dev/null @@ -1,685 +0,0 @@ -/* - * Copyright (c) 2012 - 2018, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - @addtogroup BLE_COMMON BLE SoftDevice Common - @{ - @defgroup ble_api Events, type definitions and API calls - @{ - - @brief Module independent events, type definitions and API calls for the BLE SoftDevice. - - */ - -#ifndef BLE_H__ -#define BLE_H__ - -#include <stdint.h> -#include "nrf_svc.h" -#include "nrf_error.h" -#include "ble_err.h" -#include "ble_gap.h" -#include "ble_l2cap.h" -#include "ble_gatt.h" -#include "ble_gattc.h" -#include "ble_gatts.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/** @addtogroup BLE_COMMON_ENUMERATIONS Enumerations - * @{ */ - -/** - * @brief Common API SVC numbers. - */ -enum BLE_COMMON_SVCS -{ - SD_BLE_ENABLE = BLE_SVC_BASE, /**< Enable and initialize the BLE stack */ - SD_BLE_EVT_GET, /**< Get an event from the pending events queue. */ - SD_BLE_UUID_VS_ADD, /**< Add a Vendor Specific base UUID. */ - SD_BLE_UUID_DECODE, /**< Decode UUID bytes. */ - SD_BLE_UUID_ENCODE, /**< Encode UUID bytes. */ - SD_BLE_VERSION_GET, /**< Get the local version information (company ID, Link Layer Version, Link Layer Subversion). */ - SD_BLE_USER_MEM_REPLY, /**< User Memory Reply. */ - SD_BLE_OPT_SET, /**< Set a BLE option. */ - SD_BLE_OPT_GET, /**< Get a BLE option. */ - SD_BLE_CFG_SET, /**< Add a configuration to the BLE stack. */ - SD_BLE_UUID_VS_REMOVE, /**< Remove a Vendor Specific base UUID. */ -}; - -/** - * @brief BLE Module Independent Event IDs. - */ -enum BLE_COMMON_EVTS -{ - BLE_EVT_USER_MEM_REQUEST = BLE_EVT_BASE + 0, /**< User Memory request. @ref ble_evt_user_mem_request_t */ - BLE_EVT_USER_MEM_RELEASE = BLE_EVT_BASE + 1, /**< User Memory release. @ref ble_evt_user_mem_release_t */ -}; - -/**@brief BLE Connection Configuration IDs. - * - * IDs that uniquely identify a connection configuration. - */ -enum BLE_CONN_CFGS -{ - BLE_CONN_CFG_GAP = BLE_CONN_CFG_BASE + 0, /**< BLE GAP specific connection configuration. */ - BLE_CONN_CFG_GATTC = BLE_CONN_CFG_BASE + 1, /**< BLE GATTC specific connection configuration. */ - BLE_CONN_CFG_GATTS = BLE_CONN_CFG_BASE + 2, /**< BLE GATTS specific connection configuration. */ - BLE_CONN_CFG_GATT = BLE_CONN_CFG_BASE + 3, /**< BLE GATT specific connection configuration. */ - BLE_CONN_CFG_L2CAP = BLE_CONN_CFG_BASE + 4, /**< BLE L2CAP specific connection configuration. */ -}; - -/**@brief BLE Common Configuration IDs. - * - * IDs that uniquely identify a common configuration. - */ -enum BLE_COMMON_CFGS -{ - BLE_COMMON_CFG_VS_UUID = BLE_CFG_BASE, /**< Vendor specific base UUID configuration */ -}; - -/**@brief Common Option IDs. - * IDs that uniquely identify a common option. - */ -enum BLE_COMMON_OPTS -{ - BLE_COMMON_OPT_PA_LNA = BLE_OPT_BASE + 0, /**< PA and LNA options */ - BLE_COMMON_OPT_CONN_EVT_EXT = BLE_OPT_BASE + 1, /**< Extended connection events option */ - BLE_COMMON_OPT_EXTENDED_RC_CAL = BLE_OPT_BASE + 2, /**< Extended RC calibration option */ - BLE_COMMON_OPT_ADV_SCHED_CFG = BLE_OPT_BASE + 3, /**< Advertiser role scheduling configuration option */ -}; - -/** @} */ - -/** @addtogroup BLE_COMMON_DEFINES Defines - * @{ */ - -/** @brief Required pointer alignment for BLE Events. -*/ -#define BLE_EVT_PTR_ALIGNMENT 4 - -/** @brief Leaves the maximum of the two arguments. -*/ -#define BLE_MAX(a, b) ((a) < (b) ? (b) : (a)) - -/** @brief Maximum possible length for BLE Events. - * @note The highest value used for @ref ble_gatt_conn_cfg_t::att_mtu in any connection configuration shall be used as a parameter. - * If that value has not been configured for any connections then @ref BLE_GATT_ATT_MTU_DEFAULT must be used instead. -*/ -#define BLE_EVT_LEN_MAX(ATT_MTU) ( \ - offsetof(ble_evt_t, evt.gattc_evt.params.prim_srvc_disc_rsp.services) + ((ATT_MTU) - 1) / 4 * sizeof(ble_gattc_service_t) \ -) - -/** @defgroup ADV_SCHED_CFG Advertiser Role Scheduling Configuration - * @{ */ -#define ADV_SCHED_CFG_DEFAULT 0 /**< Default advertiser role scheduling configuration. */ -#define ADV_SCHED_CFG_IMPROVED 1 /**< Improved advertiser role scheduling configuration in which the housekeeping time is reduced. */ -/** @} */ - -/** @defgroup BLE_USER_MEM_TYPES User Memory Types - * @{ */ -#define BLE_USER_MEM_TYPE_INVALID 0x00 /**< Invalid User Memory Types. */ -#define BLE_USER_MEM_TYPE_GATTS_QUEUED_WRITES 0x01 /**< User Memory for GATTS queued writes. */ -/** @} */ - -/** @defgroup BLE_UUID_VS_COUNTS Vendor Specific base UUID counts - * @{ - */ -#define BLE_UUID_VS_COUNT_DEFAULT 10 /**< Default VS UUID count. */ -#define BLE_UUID_VS_COUNT_MAX 254 /**< Maximum VS UUID count. */ -/** @} */ - -/** @defgroup BLE_COMMON_CFG_DEFAULTS Configuration defaults. - * @{ - */ -#define BLE_CONN_CFG_TAG_DEFAULT 0 /**< Default configuration tag, SoftDevice default connection configuration. */ - -/** @} */ - -/** @} */ - -/** @addtogroup BLE_COMMON_STRUCTURES Structures - * @{ */ - -/**@brief User Memory Block. */ -typedef struct -{ - uint8_t *p_mem; /**< Pointer to the start of the user memory block. */ - uint16_t len; /**< Length in bytes of the user memory block. */ -} ble_user_mem_block_t; - -/**@brief Event structure for @ref BLE_EVT_USER_MEM_REQUEST. */ -typedef struct -{ - uint8_t type; /**< User memory type, see @ref BLE_USER_MEM_TYPES. */ -} ble_evt_user_mem_request_t; - -/**@brief Event structure for @ref BLE_EVT_USER_MEM_RELEASE. */ -typedef struct -{ - uint8_t type; /**< User memory type, see @ref BLE_USER_MEM_TYPES. */ - ble_user_mem_block_t mem_block; /**< User memory block */ -} ble_evt_user_mem_release_t; - -/**@brief Event structure for events not associated with a specific function module. */ -typedef struct -{ - uint16_t conn_handle; /**< Connection Handle on which this event occurred. */ - union - { - ble_evt_user_mem_request_t user_mem_request; /**< User Memory Request Event Parameters. */ - ble_evt_user_mem_release_t user_mem_release; /**< User Memory Release Event Parameters. */ - } params; /**< Event parameter union. */ -} ble_common_evt_t; - -/**@brief BLE Event header. */ -typedef struct -{ - uint16_t evt_id; /**< Value from a BLE_<module>_EVT series. */ - uint16_t evt_len; /**< Length in octets including this header. */ -} ble_evt_hdr_t; - -/**@brief Common BLE Event type, wrapping the module specific event reports. */ -typedef struct -{ - ble_evt_hdr_t header; /**< Event header. */ - union - { - ble_common_evt_t common_evt; /**< Common Event, evt_id in BLE_EVT_* series. */ - ble_gap_evt_t gap_evt; /**< GAP originated event, evt_id in BLE_GAP_EVT_* series. */ - ble_gattc_evt_t gattc_evt; /**< GATT client originated event, evt_id in BLE_GATTC_EVT* series. */ - ble_gatts_evt_t gatts_evt; /**< GATT server originated event, evt_id in BLE_GATTS_EVT* series. */ - ble_l2cap_evt_t l2cap_evt; /**< L2CAP originated event, evt_id in BLE_L2CAP_EVT* series. */ - } evt; /**< Event union. */ -} ble_evt_t; - - -/** - * @brief Version Information. - */ -typedef struct -{ - uint8_t version_number; /**< Link Layer Version number. See https://www.bluetooth.org/en-us/specification/assigned-numbers/link-layer for assigned values. */ - uint16_t company_id; /**< Company ID, Nordic Semiconductor's company ID is 89 (0x0059) (https://www.bluetooth.org/apps/content/Default.aspx?doc_id=49708). */ - uint16_t subversion_number; /**< Link Layer Sub Version number, corresponds to the SoftDevice Config ID or Firmware ID (FWID). */ -} ble_version_t; - -/** - * @brief Configuration parameters for the PA and LNA. - */ -typedef struct -{ - uint8_t enable :1; /**< Enable toggling for this amplifier */ - uint8_t active_high :1; /**< Set the pin to be active high */ - uint8_t gpio_pin :6; /**< The GPIO pin to toggle for this amplifier */ -} ble_pa_lna_cfg_t; - -/** - * @brief PA & LNA GPIO toggle configuration - * - * This option configures the SoftDevice to toggle pins when the radio is active for use with a power amplifier and/or - * a low noise amplifier. - * - * Toggling the pins is achieved by using two PPI channels and a GPIOTE channel. The hardware channel IDs are provided - * by the application and should be regarded as reserved as long as any PA/LNA toggling is enabled. - * - * @note @ref sd_ble_opt_get is not supported for this option. - * @note Setting this option while the radio is in use (i.e. any of the roles are active) may have undefined consequences - * and must be avoided by the application. - */ -typedef struct -{ - ble_pa_lna_cfg_t pa_cfg; /**< Power Amplifier configuration */ - ble_pa_lna_cfg_t lna_cfg; /**< Low Noise Amplifier configuration */ - - uint8_t ppi_ch_id_set; /**< PPI channel used for radio pin setting */ - uint8_t ppi_ch_id_clr; /**< PPI channel used for radio pin clearing */ - uint8_t gpiote_ch_id; /**< GPIOTE channel used for radio pin toggling */ -} ble_common_opt_pa_lna_t; - -/** - * @brief Configuration of extended BLE connection events. - * - * When enabled the SoftDevice will dynamically extend the connection event when possible. - * - * The connection event length is controlled by the connection configuration as set by @ref ble_gap_conn_cfg_t::event_length. - * The connection event can be extended if there is time to send another packet pair before the start of the next connection interval, - * and if there are no conflicts with other BLE roles requesting radio time. - * - * @note @ref sd_ble_opt_get is not supported for this option. - */ -typedef struct -{ - uint8_t enable : 1; /**< Enable extended BLE connection events, disabled by default. */ -} ble_common_opt_conn_evt_ext_t; - -/** - * @brief Enable/disable extended RC calibration. - * - * If extended RC calibration is enabled and the internal RC oscillator (@ref NRF_CLOCK_LF_SRC_RC) is used as the SoftDevice - * LFCLK source, the SoftDevice as a peripheral will by default try to increase the receive window if two consecutive packets - * are not received. If it turns out that the packets were not received due to clock drift, the RC calibration is started. - * This calibration comes in addition to the periodic calibration that is configured by @ref sd_softdevice_enable(). When - * using only peripheral connections, the periodic calibration can therefore be configured with a much longer interval as the - * peripheral will be able to detect and adjust automatically to clock drift, and calibrate on demand. - * - * If extended RC calibration is disabled and the internal RC oscillator is used as the SoftDevice LFCLK source, the - * RC oscillator is calibrated periodically as configured by @ref sd_softdevice_enable(). - * - * @note @ref sd_ble_opt_get is not supported for this option. - */ -typedef struct -{ - uint8_t enable : 1; /**< Enable extended RC calibration, enabled by default. */ -} ble_common_opt_extended_rc_cal_t; - -/** - * @brief Configuration of BLE advertiser role scheduling. - * - * @note @ref sd_ble_opt_get is not supported for this option. - */ -typedef struct -{ - uint8_t sched_cfg; /**< See @ref ADV_SCHED_CFG. */ -} ble_common_opt_adv_sched_cfg_t; - -/**@brief Option structure for common options. */ -typedef union -{ - ble_common_opt_pa_lna_t pa_lna; /**< Parameters for controlling PA and LNA pin toggling. */ - ble_common_opt_conn_evt_ext_t conn_evt_ext; /**< Parameters for enabling extended connection events. */ - ble_common_opt_extended_rc_cal_t extended_rc_cal; /**< Parameters for enabling extended RC calibration. */ - ble_common_opt_adv_sched_cfg_t adv_sched_cfg; /**< Parameters for configuring advertiser role scheduling. */ -} ble_common_opt_t; - -/**@brief Common BLE Option type, wrapping the module specific options. */ -typedef union -{ - ble_common_opt_t common_opt; /**< COMMON options, opt_id in @ref BLE_COMMON_OPTS series. */ - ble_gap_opt_t gap_opt; /**< GAP option, opt_id in @ref BLE_GAP_OPTS series. */ -} ble_opt_t; - -/**@brief BLE connection configuration type, wrapping the module specific configurations, set with - * @ref sd_ble_cfg_set. - * - * @note Connection configurations don't have to be set. - * In the case that no configurations has been set, or fewer connection configurations has been set than enabled connections, - * the default connection configuration will be automatically added for the remaining connections. - * When creating connections with the default configuration, @ref BLE_CONN_CFG_TAG_DEFAULT should be used in - * place of @ref ble_conn_cfg_t::conn_cfg_tag. - * - * @sa sd_ble_gap_adv_start() - * @sa sd_ble_gap_connect() - * - * @mscs - * @mmsc{@ref BLE_CONN_CFG} - * @endmscs - - */ -typedef struct -{ - uint8_t conn_cfg_tag; /**< The application chosen tag it can use with the - @ref sd_ble_gap_adv_start() and @ref sd_ble_gap_connect() calls - to select this configuration when creating a connection. - Must be different for all connection configurations added and not @ref BLE_CONN_CFG_TAG_DEFAULT. */ - union { - ble_gap_conn_cfg_t gap_conn_cfg; /**< GAP connection configuration, cfg_id is @ref BLE_CONN_CFG_GAP. */ - ble_gattc_conn_cfg_t gattc_conn_cfg; /**< GATTC connection configuration, cfg_id is @ref BLE_CONN_CFG_GATTC. */ - ble_gatts_conn_cfg_t gatts_conn_cfg; /**< GATTS connection configuration, cfg_id is @ref BLE_CONN_CFG_GATTS. */ - ble_gatt_conn_cfg_t gatt_conn_cfg; /**< GATT connection configuration, cfg_id is @ref BLE_CONN_CFG_GATT. */ - ble_l2cap_conn_cfg_t l2cap_conn_cfg; /**< L2CAP connection configuration, cfg_id is @ref BLE_CONN_CFG_L2CAP. */ - } params; /**< Connection configuration union. */ -} ble_conn_cfg_t; - -/** - * @brief Configuration of Vendor Specific base UUIDs, set with @ref sd_ble_cfg_set. - * - * @retval ::NRF_ERROR_INVALID_PARAM Too many UUIDs configured. - */ -typedef struct -{ - uint8_t vs_uuid_count; /**< Number of 128-bit Vendor Specific base UUID bases to allocate memory for. - Default value is @ref BLE_UUID_VS_COUNT_DEFAULT. Maximum value is - @ref BLE_UUID_VS_COUNT_MAX. */ -} ble_common_cfg_vs_uuid_t; - -/**@brief Common BLE Configuration type, wrapping the common configurations. */ -typedef union -{ - ble_common_cfg_vs_uuid_t vs_uuid_cfg; /**< Vendor Specific base UUID configuration, cfg_id is @ref BLE_COMMON_CFG_VS_UUID. */ -} ble_common_cfg_t; - -/**@brief BLE Configuration type, wrapping the module specific configurations. */ -typedef union -{ - ble_conn_cfg_t conn_cfg; /**< Connection specific configurations, cfg_id in @ref BLE_CONN_CFGS series. */ - ble_common_cfg_t common_cfg; /**< Global common configurations, cfg_id in @ref BLE_COMMON_CFGS series. */ - ble_gap_cfg_t gap_cfg; /**< Global GAP configurations, cfg_id in @ref BLE_GAP_CFGS series. */ - ble_gatts_cfg_t gatts_cfg; /**< Global GATTS configuration, cfg_id in @ref BLE_GATTS_CFGS series. */ -} ble_cfg_t; - -/** @} */ - -/** @addtogroup BLE_COMMON_FUNCTIONS Functions - * @{ */ - -/**@brief Enable the BLE stack - * - * @param[in, out] p_app_ram_base Pointer to a variable containing the start address of the - * application RAM region (APP_RAM_BASE). On return, this will - * contain the minimum start address of the application RAM region - * required by the SoftDevice for this configuration. - * - * @note The memory requirement for a specific configuration will not increase between SoftDevices - * with the same major version number. - * - * @note At runtime the IC's RAM is split into 2 regions: The SoftDevice RAM region is located - * between 0x20000000 and APP_RAM_BASE-1 and the application's RAM region is located between - * APP_RAM_BASE and the start of the call stack. - * - * @details This call initializes the BLE stack, no BLE related function other than @ref - * sd_ble_cfg_set can be called before this one. - * - * @mscs - * @mmsc{@ref BLE_COMMON_ENABLE} - * @endmscs - * - * @retval ::NRF_SUCCESS The BLE stack has been initialized successfully. - * @retval ::NRF_ERROR_INVALID_STATE The BLE stack had already been initialized and cannot be reinitialized. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied. - * @retval ::NRF_ERROR_NO_MEM One or more of the following is true: - * - The amount of memory assigned to the SoftDevice by *p_app_ram_base is not - * large enough to fit this configuration's memory requirement. Check *p_app_ram_base - * and set the start address of the application RAM region accordingly. - * - Dynamic part of the SoftDevice RAM region is larger then 64 kB which - * is currently not supported. - * @retval ::NRF_ERROR_RESOURCES The total number of L2CAP Channels configured using @ref sd_ble_cfg_set is too large. - */ -SVCALL(SD_BLE_ENABLE, uint32_t, sd_ble_enable(uint32_t * p_app_ram_base)); - -/**@brief Add configurations for the BLE stack - * - * @param[in] cfg_id Config ID, see @ref BLE_CONN_CFGS, @ref BLE_COMMON_CFGS, @ref - * BLE_GAP_CFGS or @ref BLE_GATTS_CFGS. - * @param[in] p_cfg Pointer to a ble_cfg_t structure containing the configuration value. - * @param[in] app_ram_base The start address of the application RAM region (APP_RAM_BASE). - * See @ref sd_ble_enable for details about APP_RAM_BASE. - * - * @note The memory requirement for a specific configuration will not increase between SoftDevices - * with the same major version number. - * - * @note If a configuration is set more than once, the last one set is the one that takes effect on - * @ref sd_ble_enable. - * - * @note Any part of the BLE stack that is NOT configured with @ref sd_ble_cfg_set will have default - * configuration. - * - * @note @ref sd_ble_cfg_set may be called at any time when the SoftDevice is enabled (see @ref - * sd_softdevice_enable) while the BLE part of the SoftDevice is not enabled (see @ref - * sd_ble_enable). - * - * @note Error codes for the configurations are described in the configuration structs. - * - * @mscs - * @mmsc{@ref BLE_COMMON_ENABLE} - * @endmscs - * - * @retval ::NRF_SUCCESS The configuration has been added successfully. - * @retval ::NRF_ERROR_INVALID_STATE The BLE stack had already been initialized. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid cfg_id supplied. - * @retval ::NRF_ERROR_NO_MEM The amount of memory assigned to the SoftDevice by app_ram_base is not - * large enough to fit this configuration's memory requirement. - */ -SVCALL(SD_BLE_CFG_SET, uint32_t, sd_ble_cfg_set(uint32_t cfg_id, ble_cfg_t const * p_cfg, uint32_t app_ram_base)); - -/**@brief Get an event from the pending events queue. - * - * @param[out] p_dest Pointer to buffer to be filled in with an event, or NULL to retrieve the event length. - * This buffer <b>must be aligned to the extend defined by @ref BLE_EVT_PTR_ALIGNMENT</b>. - * The buffer should be interpreted as a @ref ble_evt_t struct. - * @param[in, out] p_len Pointer the length of the buffer, on return it is filled with the event length. - * - * @details This call allows the application to pull a BLE event from the BLE stack. The application is signaled that - * an event is available from the BLE stack by the triggering of the SD_EVT_IRQn interrupt. - * The application is free to choose whether to call this function from thread mode (main context) or directly from the - * Interrupt Service Routine that maps to SD_EVT_IRQn. In any case however, and because the BLE stack runs at a higher - * priority than the application, this function should be called in a loop (until @ref NRF_ERROR_NOT_FOUND is returned) - * every time SD_EVT_IRQn is raised to ensure that all available events are pulled from the BLE stack. Failure to do so - * could potentially leave events in the internal queue without the application being aware of this fact. - * - * Sizing the p_dest buffer is equally important, since the application needs to provide all the memory necessary for the event to - * be copied into application memory. If the buffer provided is not large enough to fit the entire contents of the event, - * @ref NRF_ERROR_DATA_SIZE will be returned and the application can then call again with a larger buffer size. - * The maximum possible event length is defined by @ref BLE_EVT_LEN_MAX. The application may also "peek" the event length - * by providing p_dest as a NULL pointer and inspecting the value of *p_len upon return: - * - * \code - * uint16_t len; - * errcode = sd_ble_evt_get(NULL, &len); - * \endcode - * - * @mscs - * @mmsc{@ref BLE_COMMON_IRQ_EVT_MSC} - * @mmsc{@ref BLE_COMMON_THREAD_EVT_MSC} - * @endmscs - * - * @retval ::NRF_SUCCESS Event pulled and stored into the supplied buffer. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied. - * @retval ::NRF_ERROR_NOT_FOUND No events ready to be pulled. - * @retval ::NRF_ERROR_DATA_SIZE Event ready but could not fit into the supplied buffer. - */ -SVCALL(SD_BLE_EVT_GET, uint32_t, sd_ble_evt_get(uint8_t *p_dest, uint16_t *p_len)); - - -/**@brief Add a Vendor Specific base UUID. - * - * @details This call enables the application to add a Vendor Specific base UUID to the BLE stack's table, for later - * use with all other modules and APIs. This then allows the application to use the shorter, 24-bit @ref ble_uuid_t - * format when dealing with both 16-bit and 128-bit UUIDs without having to check for lengths and having split code - * paths. This is accomplished by extending the grouping mechanism that the Bluetooth SIG standard base UUID uses - * for all other 128-bit UUIDs. The type field in the @ref ble_uuid_t structure is an index (relative to - * @ref BLE_UUID_TYPE_VENDOR_BEGIN) to the table populated by multiple calls to this function, and the UUID field - * in the same structure contains the 2 bytes at indexes 12 and 13. The number of possible 128-bit UUIDs available to - * the application is therefore the number of Vendor Specific UUIDs added with the help of this function times 65536, - * although restricted to modifying bytes 12 and 13 for each of the entries in the supplied array. - * - * @note Bytes 12 and 13 of the provided UUID will not be used internally, since those are always replaced by - * the 16-bit uuid field in @ref ble_uuid_t. - * - * @note If a UUID is already present in the BLE stack's internal table, the corresponding index will be returned in - * p_uuid_type along with an @ref NRF_SUCCESS error code. - * - * @param[in] p_vs_uuid Pointer to a 16-octet (128-bit) little endian Vendor Specific base UUID disregarding - * bytes 12 and 13. - * @param[out] p_uuid_type Pointer to a uint8_t where the type field in @ref ble_uuid_t corresponding to this UUID will be stored. - * - * @retval ::NRF_SUCCESS Successfully added the Vendor Specific base UUID. - * @retval ::NRF_ERROR_INVALID_ADDR If p_vs_uuid or p_uuid_type is NULL or invalid. - * @retval ::NRF_ERROR_NO_MEM If there are no more free slots for VS UUIDs. - */ -SVCALL(SD_BLE_UUID_VS_ADD, uint32_t, sd_ble_uuid_vs_add(ble_uuid128_t const *p_vs_uuid, uint8_t *p_uuid_type)); - - -/**@brief Remove a Vendor Specific base UUID. - * - * @details This call removes a Vendor Specific base UUID that has been added with @ref sd_ble_uuid_vs_add. This function allows - * the application to reuse memory allocated for Vendor Specific base UUIDs. - * - * @note Currently this function can only be called with a p_uuid_type set to @ref BLE_UUID_TYPE_UNKNOWN or the last added UUID type. - * - * @param[in] p_uuid_type Pointer to a uint8_t where the type field in @ref ble_uuid_t::type corresponds to the UUID type that - * shall be removed. If the type is set to @ref BLE_UUID_TYPE_UNKNOWN, or the pointer is NULL, the last - * Vendor Specific base UUID will be removed. - * @param[out] p_uuid_type Pointer to a uint8_t where the type field in @ref ble_uuid_t corresponds to the UUID type that was - * removed. If function returns with a failure, it contains the last type that is in use by the ATT Server. - * - * @retval ::NRF_SUCCESS Successfully removed the Vendor Specific base UUID. - * @retval ::NRF_ERROR_INVALID_ADDR If p_uuid_type is invalid. - * @retval ::NRF_ERROR_INVALID_PARAM If p_uuid_type points to a non-valid UUID type. - * @retval ::NRF_ERROR_FORBIDDEN If the Vendor Specific base UUID is in use by the ATT Server. - */ - -SVCALL(SD_BLE_UUID_VS_REMOVE, uint32_t, sd_ble_uuid_vs_remove(uint8_t *p_uuid_type)); - - -/** @brief Decode little endian raw UUID bytes (16-bit or 128-bit) into a 24 bit @ref ble_uuid_t structure. - * - * @details The raw UUID bytes excluding bytes 12 and 13 (i.e. bytes 0-11 and 14-15) of p_uuid_le are compared - * to the corresponding ones in each entry of the table of Vendor Specific base UUIDs populated with @ref sd_ble_uuid_vs_add - * to look for a match. If there is such a match, bytes 12 and 13 are returned as p_uuid->uuid and the index - * relative to @ref BLE_UUID_TYPE_VENDOR_BEGIN as p_uuid->type. - * - * @note If the UUID length supplied is 2, then the type set by this call will always be @ref BLE_UUID_TYPE_BLE. - * - * @param[in] uuid_le_len Length in bytes of the buffer pointed to by p_uuid_le (must be 2 or 16 bytes). - * @param[in] p_uuid_le Pointer pointing to little endian raw UUID bytes. - * @param[out] p_uuid Pointer to a @ref ble_uuid_t structure to be filled in. - * - * @retval ::NRF_SUCCESS Successfully decoded into the @ref ble_uuid_t structure. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_LENGTH Invalid UUID length. - * @retval ::NRF_ERROR_NOT_FOUND For a 128-bit UUID, no match in the populated table of UUIDs. - */ -SVCALL(SD_BLE_UUID_DECODE, uint32_t, sd_ble_uuid_decode(uint8_t uuid_le_len, uint8_t const *p_uuid_le, ble_uuid_t *p_uuid)); - - -/** @brief Encode a @ref ble_uuid_t structure into little endian raw UUID bytes (16-bit or 128-bit). - * - * @note The pointer to the destination buffer p_uuid_le may be NULL, in which case only the validity and size of p_uuid is computed. - * - * @param[in] p_uuid Pointer to a @ref ble_uuid_t structure that will be encoded into bytes. - * @param[out] p_uuid_le_len Pointer to a uint8_t that will be filled with the encoded length (2 or 16 bytes). - * @param[out] p_uuid_le Pointer to a buffer where the little endian raw UUID bytes (2 or 16) will be stored. - * - * @retval ::NRF_SUCCESS Successfully encoded into the buffer. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid UUID type. - */ -SVCALL(SD_BLE_UUID_ENCODE, uint32_t, sd_ble_uuid_encode(ble_uuid_t const *p_uuid, uint8_t *p_uuid_le_len, uint8_t *p_uuid_le)); - - -/**@brief Get Version Information. - * - * @details This call allows the application to get the BLE stack version information. - * - * @param[out] p_version Pointer to a ble_version_t structure to be filled in. - * - * @retval ::NRF_SUCCESS Version information stored successfully. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_BUSY The BLE stack is busy (typically doing a locally-initiated disconnection procedure). - */ -SVCALL(SD_BLE_VERSION_GET, uint32_t, sd_ble_version_get(ble_version_t *p_version)); - - -/**@brief Provide a user memory block. - * - * @note This call can only be used as a response to a @ref BLE_EVT_USER_MEM_REQUEST event issued to the application. - * - * @param[in] conn_handle Connection handle. - * @param[in] p_block Pointer to a user memory block structure or NULL if memory is managed by the application. - * - * @mscs - * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_PEER_CANCEL_MSC} - * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_AUTH_MSC} - * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_NOAUTH_MSC} - * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_BUF_AUTH_MSC} - * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_BUF_NOAUTH_MSC} - * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_QUEUE_FULL_MSC} - * @endmscs - * - * @retval ::NRF_SUCCESS Successfully queued a response to the peer. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_LENGTH Invalid user memory block length supplied. - * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection state or no user memory request pending. - */ -SVCALL(SD_BLE_USER_MEM_REPLY, uint32_t, sd_ble_user_mem_reply(uint16_t conn_handle, ble_user_mem_block_t const *p_block)); - -/**@brief Set a BLE option. - * - * @details This call allows the application to set the value of an option. - * - * @mscs - * @mmsc{@ref BLE_GAP_PERIPH_BONDING_STATIC_PK_MSC} - * @endmscs - * - * @param[in] opt_id Option ID, see @ref BLE_COMMON_OPTS and @ref BLE_GAP_OPTS. - * @param[in] p_opt Pointer to a ble_opt_t structure containing the option value. - * - * @retval ::NRF_SUCCESS Option set successfully. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints. - * @retval ::NRF_ERROR_INVALID_STATE Unable to set the parameter at this time. - * @retval ::NRF_ERROR_BUSY The BLE stack is busy or the previous procedure has not completed. - */ -SVCALL(SD_BLE_OPT_SET, uint32_t, sd_ble_opt_set(uint32_t opt_id, ble_opt_t const *p_opt)); - - -/**@brief Get a BLE option. - * - * @details This call allows the application to retrieve the value of an option. - * - * @param[in] opt_id Option ID, see @ref BLE_COMMON_OPTS and @ref BLE_GAP_OPTS. - * @param[out] p_opt Pointer to a ble_opt_t structure to be filled in. - * - * @retval ::NRF_SUCCESS Option retrieved successfully. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints. - * @retval ::NRF_ERROR_INVALID_STATE Unable to retrieve the parameter at this time. - * @retval ::NRF_ERROR_BUSY The BLE stack is busy or the previous procedure has not completed. - * @retval ::NRF_ERROR_NOT_SUPPORTED This option is not supported. - * - */ -SVCALL(SD_BLE_OPT_GET, uint32_t, sd_ble_opt_get(uint32_t opt_id, ble_opt_t *p_opt)); - -/** @} */ -#ifdef __cplusplus -} -#endif -#endif /* BLE_H__ */ - -/** - @} - @} -*/ diff --git a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_err.h b/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_err.h deleted file mode 100755 index 1b4820dc..00000000 --- a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_err.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Copyright (c) 2012 - 2018, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - @addtogroup BLE_COMMON - @{ - @addtogroup nrf_error - @{ - @ingroup BLE_COMMON - @} - - @defgroup ble_err General error codes - @{ - - @brief General error code definitions for the BLE API. - - @ingroup BLE_COMMON -*/ -#ifndef NRF_BLE_ERR_H__ -#define NRF_BLE_ERR_H__ - -#include "nrf_error.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/* @defgroup BLE_ERRORS Error Codes - * @{ */ -#define BLE_ERROR_NOT_ENABLED (NRF_ERROR_STK_BASE_NUM+0x001) /**< @ref sd_ble_enable has not been called. */ -#define BLE_ERROR_INVALID_CONN_HANDLE (NRF_ERROR_STK_BASE_NUM+0x002) /**< Invalid connection handle. */ -#define BLE_ERROR_INVALID_ATTR_HANDLE (NRF_ERROR_STK_BASE_NUM+0x003) /**< Invalid attribute handle. */ -#define BLE_ERROR_INVALID_ADV_HANDLE (NRF_ERROR_STK_BASE_NUM+0x004) /**< Invalid advertising handle. */ -#define BLE_ERROR_INVALID_ROLE (NRF_ERROR_STK_BASE_NUM+0x005) /**< Invalid role. */ -#define BLE_ERROR_BLOCKED_BY_OTHER_LINKS (NRF_ERROR_STK_BASE_NUM+0x006) /**< The attempt to change link settings failed due to the scheduling of other links. */ -/** @} */ - - -/** @defgroup BLE_ERROR_SUBRANGES Module specific error code subranges - * @brief Assignment of subranges for module specific error codes. - * @note For specific error codes, see ble_<module>.h or ble_error_<module>.h. - * @{ */ -#define NRF_L2CAP_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x100) /**< L2CAP specific errors. */ -#define NRF_GAP_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x200) /**< GAP specific errors. */ -#define NRF_GATTC_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x300) /**< GATT client specific errors. */ -#define NRF_GATTS_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x400) /**< GATT server specific errors. */ -/** @} */ - -#ifdef __cplusplus -} -#endif -#endif - - -/** - @} - @} -*/ diff --git a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gap.h b/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gap.h deleted file mode 100755 index c434fefb..00000000 --- a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gap.h +++ /dev/null @@ -1,2696 +0,0 @@ -/* - * Copyright (c) 2011 - 2018, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - @addtogroup BLE_GAP Generic Access Profile (GAP) - @{ - @brief Definitions and prototypes for the GAP interface. - */ - -#ifndef BLE_GAP_H__ -#define BLE_GAP_H__ - -#include <stdint.h> -#include "nrf_svc.h" -#include "nrf_error.h" -#include "ble_hci.h" -#include "ble_ranges.h" -#include "ble_types.h" -#include "ble_err.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/**@addtogroup BLE_GAP_ENUMERATIONS Enumerations - * @{ */ - -/**@brief GAP API SVC numbers. - */ -enum BLE_GAP_SVCS -{ - SD_BLE_GAP_ADDR_SET = BLE_GAP_SVC_BASE, /**< Set own Bluetooth Address. */ - SD_BLE_GAP_ADDR_GET = BLE_GAP_SVC_BASE + 1, /**< Get own Bluetooth Address. */ - SD_BLE_GAP_WHITELIST_SET = BLE_GAP_SVC_BASE + 2, /**< Set active whitelist. */ - SD_BLE_GAP_DEVICE_IDENTITIES_SET = BLE_GAP_SVC_BASE + 3, /**< Set device identity list. */ - SD_BLE_GAP_PRIVACY_SET = BLE_GAP_SVC_BASE + 4, /**< Set Privacy settings*/ - SD_BLE_GAP_PRIVACY_GET = BLE_GAP_SVC_BASE + 5, /**< Get Privacy settings*/ - SD_BLE_GAP_ADV_SET_CONFIGURE = BLE_GAP_SVC_BASE + 6, /**< Configure an advertising set. */ - SD_BLE_GAP_ADV_START = BLE_GAP_SVC_BASE + 7, /**< Start Advertising. */ - SD_BLE_GAP_ADV_STOP = BLE_GAP_SVC_BASE + 8, /**< Stop Advertising. */ - SD_BLE_GAP_CONN_PARAM_UPDATE = BLE_GAP_SVC_BASE + 9, /**< Connection Parameter Update. */ - SD_BLE_GAP_DISCONNECT = BLE_GAP_SVC_BASE + 10, /**< Disconnect. */ - SD_BLE_GAP_TX_POWER_SET = BLE_GAP_SVC_BASE + 11, /**< Set TX Power. */ - SD_BLE_GAP_APPEARANCE_SET = BLE_GAP_SVC_BASE + 12, /**< Set Appearance. */ - SD_BLE_GAP_APPEARANCE_GET = BLE_GAP_SVC_BASE + 13, /**< Get Appearance. */ - SD_BLE_GAP_PPCP_SET = BLE_GAP_SVC_BASE + 14, /**< Set PPCP. */ - SD_BLE_GAP_PPCP_GET = BLE_GAP_SVC_BASE + 15, /**< Get PPCP. */ - SD_BLE_GAP_DEVICE_NAME_SET = BLE_GAP_SVC_BASE + 16, /**< Set Device Name. */ - SD_BLE_GAP_DEVICE_NAME_GET = BLE_GAP_SVC_BASE + 17, /**< Get Device Name. */ - SD_BLE_GAP_AUTHENTICATE = BLE_GAP_SVC_BASE + 18, /**< Initiate Pairing/Bonding. */ - SD_BLE_GAP_SEC_PARAMS_REPLY = BLE_GAP_SVC_BASE + 19, /**< Reply with Security Parameters. */ - SD_BLE_GAP_AUTH_KEY_REPLY = BLE_GAP_SVC_BASE + 20, /**< Reply with an authentication key. */ - SD_BLE_GAP_LESC_DHKEY_REPLY = BLE_GAP_SVC_BASE + 21, /**< Reply with an LE Secure Connections DHKey. */ - SD_BLE_GAP_KEYPRESS_NOTIFY = BLE_GAP_SVC_BASE + 22, /**< Notify of a keypress during an authentication procedure. */ - SD_BLE_GAP_LESC_OOB_DATA_GET = BLE_GAP_SVC_BASE + 23, /**< Get the local LE Secure Connections OOB data. */ - SD_BLE_GAP_LESC_OOB_DATA_SET = BLE_GAP_SVC_BASE + 24, /**< Set the remote LE Secure Connections OOB data. */ - SD_BLE_GAP_ENCRYPT = BLE_GAP_SVC_BASE + 25, /**< Initiate encryption procedure. */ - SD_BLE_GAP_SEC_INFO_REPLY = BLE_GAP_SVC_BASE + 26, /**< Reply with Security Information. */ - SD_BLE_GAP_CONN_SEC_GET = BLE_GAP_SVC_BASE + 27, /**< Obtain connection security level. */ - SD_BLE_GAP_RSSI_START = BLE_GAP_SVC_BASE + 28, /**< Start reporting of changes in RSSI. */ - SD_BLE_GAP_RSSI_STOP = BLE_GAP_SVC_BASE + 29, /**< Stop reporting of changes in RSSI. */ - SD_BLE_GAP_SCAN_START = BLE_GAP_SVC_BASE + 30, /**< Start Scanning. */ - SD_BLE_GAP_SCAN_STOP = BLE_GAP_SVC_BASE + 31, /**< Stop Scanning. */ - SD_BLE_GAP_CONNECT = BLE_GAP_SVC_BASE + 32, /**< Connect. */ - SD_BLE_GAP_CONNECT_CANCEL = BLE_GAP_SVC_BASE + 33, /**< Cancel ongoing connection procedure. */ - SD_BLE_GAP_RSSI_GET = BLE_GAP_SVC_BASE + 34, /**< Get the last RSSI sample. */ - SD_BLE_GAP_PHY_UPDATE = BLE_GAP_SVC_BASE + 35, /**< Initiate or respond to a PHY Update Procedure. */ - SD_BLE_GAP_DATA_LENGTH_UPDATE = BLE_GAP_SVC_BASE + 36, /**< Initiate or respond to a Data Length Update Procedure. */ - SD_BLE_GAP_QOS_CHANNEL_SURVEY_START = BLE_GAP_SVC_BASE + 37, /**< Start Quality of Service (QoS) channel survey module. */ - SD_BLE_GAP_QOS_CHANNEL_SURVEY_STOP = BLE_GAP_SVC_BASE + 38, /**< Stop Quality of Service (QoS) channel survey module. */ - SD_BLE_GAP_ADV_ADDR_GET = BLE_GAP_SVC_BASE + 39, /**< Get the Address used on air while Advertising. */ -}; - -/**@brief GAP Event IDs. - * IDs that uniquely identify an event coming from the stack to the application. - */ -enum BLE_GAP_EVTS -{ - BLE_GAP_EVT_CONNECTED = BLE_GAP_EVT_BASE, /**< Connected to peer. \n See @ref ble_gap_evt_connected_t */ - BLE_GAP_EVT_DISCONNECTED = BLE_GAP_EVT_BASE + 1, /**< Disconnected from peer. \n See @ref ble_gap_evt_disconnected_t. */ - BLE_GAP_EVT_CONN_PARAM_UPDATE = BLE_GAP_EVT_BASE + 2, /**< Connection Parameters updated. \n See @ref ble_gap_evt_conn_param_update_t. */ - BLE_GAP_EVT_SEC_PARAMS_REQUEST = BLE_GAP_EVT_BASE + 3, /**< Request to provide security parameters. \n Reply with @ref sd_ble_gap_sec_params_reply. \n See @ref ble_gap_evt_sec_params_request_t. */ - BLE_GAP_EVT_SEC_INFO_REQUEST = BLE_GAP_EVT_BASE + 4, /**< Request to provide security information. \n Reply with @ref sd_ble_gap_sec_info_reply. \n See @ref ble_gap_evt_sec_info_request_t. */ - BLE_GAP_EVT_PASSKEY_DISPLAY = BLE_GAP_EVT_BASE + 5, /**< Request to display a passkey to the user. \n In LESC Numeric Comparison, reply with @ref sd_ble_gap_auth_key_reply. \n See @ref ble_gap_evt_passkey_display_t. */ - BLE_GAP_EVT_KEY_PRESSED = BLE_GAP_EVT_BASE + 6, /**< Notification of a keypress on the remote device.\n See @ref ble_gap_evt_key_pressed_t */ - BLE_GAP_EVT_AUTH_KEY_REQUEST = BLE_GAP_EVT_BASE + 7, /**< Request to provide an authentication key. \n Reply with @ref sd_ble_gap_auth_key_reply. \n See @ref ble_gap_evt_auth_key_request_t. */ - BLE_GAP_EVT_LESC_DHKEY_REQUEST = BLE_GAP_EVT_BASE + 8, /**< Request to calculate an LE Secure Connections DHKey. \n Reply with @ref sd_ble_gap_lesc_dhkey_reply. \n See @ref ble_gap_evt_lesc_dhkey_request_t */ - BLE_GAP_EVT_AUTH_STATUS = BLE_GAP_EVT_BASE + 9, /**< Authentication procedure completed with status. \n See @ref ble_gap_evt_auth_status_t. */ - BLE_GAP_EVT_CONN_SEC_UPDATE = BLE_GAP_EVT_BASE + 10, /**< Connection security updated. \n See @ref ble_gap_evt_conn_sec_update_t. */ - BLE_GAP_EVT_TIMEOUT = BLE_GAP_EVT_BASE + 11, /**< Timeout expired. \n See @ref ble_gap_evt_timeout_t. */ - BLE_GAP_EVT_RSSI_CHANGED = BLE_GAP_EVT_BASE + 12, /**< RSSI report. \n See @ref ble_gap_evt_rssi_changed_t. */ - BLE_GAP_EVT_ADV_REPORT = BLE_GAP_EVT_BASE + 13, /**< Advertising report. \n See @ref ble_gap_evt_adv_report_t. */ - BLE_GAP_EVT_SEC_REQUEST = BLE_GAP_EVT_BASE + 14, /**< Security Request. \n See @ref ble_gap_evt_sec_request_t. */ - BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST = BLE_GAP_EVT_BASE + 15, /**< Connection Parameter Update Request. \n Reply with @ref sd_ble_gap_conn_param_update. \n See @ref ble_gap_evt_conn_param_update_request_t. */ - BLE_GAP_EVT_SCAN_REQ_REPORT = BLE_GAP_EVT_BASE + 16, /**< Scan request report. \n See @ref ble_gap_evt_scan_req_report_t. */ - BLE_GAP_EVT_PHY_UPDATE_REQUEST = BLE_GAP_EVT_BASE + 17, /**< PHY Update Request. \n Reply with @ref sd_ble_gap_phy_update. \n See @ref ble_gap_evt_phy_update_request_t. */ - BLE_GAP_EVT_PHY_UPDATE = BLE_GAP_EVT_BASE + 18, /**< PHY Update Procedure is complete. \n See @ref ble_gap_evt_phy_update_t. */ - BLE_GAP_EVT_DATA_LENGTH_UPDATE_REQUEST = BLE_GAP_EVT_BASE + 19, /**< Data Length Update Request. \n Reply with @ref sd_ble_gap_data_length_update.\n See @ref ble_gap_evt_data_length_update_request_t. */ - BLE_GAP_EVT_DATA_LENGTH_UPDATE = BLE_GAP_EVT_BASE + 20, /**< LL Data Channel PDU payload length updated. \n See @ref ble_gap_evt_data_length_update_t. */ - BLE_GAP_EVT_QOS_CHANNEL_SURVEY_REPORT = BLE_GAP_EVT_BASE + 21, /**< Channel survey report. \n See @ref ble_gap_evt_qos_channel_survey_report_t. */ - BLE_GAP_EVT_ADV_SET_TERMINATED = BLE_GAP_EVT_BASE + 22, /**< Advertising set terminated. \n See @ref ble_gap_evt_adv_set_terminated_t. */ -}; - -/**@brief GAP Option IDs. - * IDs that uniquely identify a GAP option. - */ -enum BLE_GAP_OPTS -{ - BLE_GAP_OPT_CH_MAP = BLE_GAP_OPT_BASE, /**< Channel Map. @ref ble_gap_opt_ch_map_t */ - BLE_GAP_OPT_LOCAL_CONN_LATENCY = BLE_GAP_OPT_BASE + 1, /**< Local connection latency. @ref ble_gap_opt_local_conn_latency_t */ - BLE_GAP_OPT_PASSKEY = BLE_GAP_OPT_BASE + 2, /**< Set passkey. @ref ble_gap_opt_passkey_t */ - BLE_GAP_OPT_COMPAT_MODE_1 = BLE_GAP_OPT_BASE + 3, /**< Compatibility mode. @ref ble_gap_opt_compat_mode_1_t */ - BLE_GAP_OPT_AUTH_PAYLOAD_TIMEOUT = BLE_GAP_OPT_BASE + 4, /**< Set Authenticated payload timeout. @ref ble_gap_opt_auth_payload_timeout_t */ - BLE_GAP_OPT_SLAVE_LATENCY_DISABLE = BLE_GAP_OPT_BASE + 5, /**< Disable slave latency. @ref ble_gap_opt_slave_latency_disable_t */ -}; - -/**@brief GAP Configuration IDs. - * - * IDs that uniquely identify a GAP configuration. - */ -enum BLE_GAP_CFGS -{ - BLE_GAP_CFG_ROLE_COUNT = BLE_GAP_CFG_BASE, /**< Role count configuration. */ - BLE_GAP_CFG_DEVICE_NAME = BLE_GAP_CFG_BASE + 1, /**< Device name configuration. */ -}; - -/**@brief GAP TX Power roles. - */ -enum BLE_GAP_TX_POWER_ROLES -{ - BLE_GAP_TX_POWER_ROLE_ADV = 1, /**< Advertiser role. */ - BLE_GAP_TX_POWER_ROLE_SCAN_INIT = 2, /**< Scanner and initiator role. */ - BLE_GAP_TX_POWER_ROLE_CONN = 3, /**< Connection role. */ -}; - -/** @} */ - -/**@addtogroup BLE_GAP_DEFINES Defines - * @{ */ - -/**@defgroup BLE_ERRORS_GAP SVC return values specific to GAP - * @{ */ -#define BLE_ERROR_GAP_UUID_LIST_MISMATCH (NRF_GAP_ERR_BASE + 0x000) /**< UUID list does not contain an integral number of UUIDs. */ -#define BLE_ERROR_GAP_DISCOVERABLE_WITH_WHITELIST (NRF_GAP_ERR_BASE + 0x001) /**< Use of Whitelist not permitted with discoverable advertising. */ -#define BLE_ERROR_GAP_INVALID_BLE_ADDR (NRF_GAP_ERR_BASE + 0x002) /**< The upper two bits of the address do not correspond to the specified address type. */ -#define BLE_ERROR_GAP_WHITELIST_IN_USE (NRF_GAP_ERR_BASE + 0x003) /**< Attempt to modify the whitelist while already in use by another operation. */ -#define BLE_ERROR_GAP_DEVICE_IDENTITIES_IN_USE (NRF_GAP_ERR_BASE + 0x004) /**< Attempt to modify the device identity list while already in use by another operation. */ -#define BLE_ERROR_GAP_DEVICE_IDENTITIES_DUPLICATE (NRF_GAP_ERR_BASE + 0x005) /**< The device identity list contains entries with duplicate identity addresses. */ -/**@} */ - - -/**@defgroup BLE_GAP_ROLES GAP Roles - * @{ */ -#define BLE_GAP_ROLE_INVALID 0x0 /**< Invalid Role. */ -#define BLE_GAP_ROLE_PERIPH 0x1 /**< Peripheral Role. */ -#define BLE_GAP_ROLE_CENTRAL 0x2 /**< Central Role. */ -/**@} */ - - -/**@defgroup BLE_GAP_TIMEOUT_SOURCES GAP Timeout sources - * @{ */ -#define BLE_GAP_TIMEOUT_SRC_SCAN 0x01 /**< Scanning timeout. */ -#define BLE_GAP_TIMEOUT_SRC_CONN 0x02 /**< Connection timeout. */ -#define BLE_GAP_TIMEOUT_SRC_AUTH_PAYLOAD 0x03 /**< Authenticated payload timeout. */ -/**@} */ - - -/**@defgroup BLE_GAP_ADDR_TYPES GAP Address types - * @{ */ -#define BLE_GAP_ADDR_TYPE_PUBLIC 0x00 /**< Public (identity) address.*/ -#define BLE_GAP_ADDR_TYPE_RANDOM_STATIC 0x01 /**< Random static (identity) address. */ -#define BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE 0x02 /**< Random private resolvable address. */ -#define BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE 0x03 /**< Random private non-resolvable address. */ -#define BLE_GAP_ADDR_TYPE_ANONYMOUS 0x7F /**< An advertiser may advertise without its address. - This type of advertising is called anonymous. */ -/**@} */ - - -/**@brief The default interval in seconds at which a private address is refreshed. */ -#define BLE_GAP_DEFAULT_PRIVATE_ADDR_CYCLE_INTERVAL_S (900) /* 15 minutes. */ -/**@brief The maximum interval in seconds at which a private address can be refreshed. */ -#define BLE_GAP_MAX_PRIVATE_ADDR_CYCLE_INTERVAL_S (41400) /* 11 hours 30 minutes. */ - - -/** @brief BLE address length. */ -#define BLE_GAP_ADDR_LEN (6) - -/**@defgroup BLE_GAP_PRIVACY_MODES Privacy modes - * @{ */ -#define BLE_GAP_PRIVACY_MODE_OFF 0x00 /**< Device will send and accept its identity address for its own address. */ -#define BLE_GAP_PRIVACY_MODE_DEVICE_PRIVACY 0x01 /**< Device will send and accept only private addresses for its own address. */ -#define BLE_GAP_PRIVACY_MODE_NETWORK_PRIVACY 0x02 /**< Device will send and accept only private addresses for its own address, - and will not accept a peer using identity address as sender address when - the peer IRK is exchanged, non-zero and added to the identity list. */ -/**@} */ - -/** @brief Invalid power level. */ -#define BLE_GAP_POWER_LEVEL_INVALID 127 - -/** @brief Advertising set handle not set. */ -#define BLE_GAP_ADV_SET_HANDLE_NOT_SET (0xFF) - -/** @brief The default number of advertising sets. */ -#define BLE_GAP_ADV_SET_COUNT_DEFAULT (1) - -/** @brief The maximum number of advertising sets supported by this SoftDevice. */ -#define BLE_GAP_ADV_SET_COUNT_MAX (1) - -/**@defgroup BLE_GAP_ADV_SET_DATA_SIZES Advertising data sizes. - * @{ */ -#define BLE_GAP_ADV_SET_DATA_SIZE_MAX (31) /**< Maximum data length for an advertising set. - If more advertising data is required, use extended advertising instead. */ -#define BLE_GAP_ADV_SET_DATA_SIZE_EXTENDED_MAX_SUPPORTED (255) /**< Maximum supported data length for an extended advertising set. */ - -#define BLE_GAP_ADV_SET_DATA_SIZE_EXTENDED_CONNECTABLE_MAX_SUPPORTED (238) /**< Maximum supported data length for an extended connectable advertising set. */ -/**@}. */ - -/** @brief Set ID not available in advertising report. */ -#define BLE_GAP_ADV_REPORT_SET_ID_NOT_AVAILABLE 0xFF - -/**@defgroup BLE_GAP_EVT_ADV_SET_TERMINATED_REASON GAP Advertising Set Terminated reasons - * @{ */ -#define BLE_GAP_EVT_ADV_SET_TERMINATED_REASON_TIMEOUT 0x01 /**< Timeout value reached. */ -#define BLE_GAP_EVT_ADV_SET_TERMINATED_REASON_LIMIT_REACHED 0x02 /**< @ref ble_gap_adv_params_t::max_adv_evts was reached. */ -/**@} */ - -/**@defgroup BLE_GAP_AD_TYPE_DEFINITIONS GAP Advertising and Scan Response Data format - * @note Found at https://www.bluetooth.org/Technical/AssignedNumbers/generic_access_profile.htm - * @{ */ -#define BLE_GAP_AD_TYPE_FLAGS 0x01 /**< Flags for discoverability. */ -#define BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_MORE_AVAILABLE 0x02 /**< Partial list of 16 bit service UUIDs. */ -#define BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_COMPLETE 0x03 /**< Complete list of 16 bit service UUIDs. */ -#define BLE_GAP_AD_TYPE_32BIT_SERVICE_UUID_MORE_AVAILABLE 0x04 /**< Partial list of 32 bit service UUIDs. */ -#define BLE_GAP_AD_TYPE_32BIT_SERVICE_UUID_COMPLETE 0x05 /**< Complete list of 32 bit service UUIDs. */ -#define BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_MORE_AVAILABLE 0x06 /**< Partial list of 128 bit service UUIDs. */ -#define BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_COMPLETE 0x07 /**< Complete list of 128 bit service UUIDs. */ -#define BLE_GAP_AD_TYPE_SHORT_LOCAL_NAME 0x08 /**< Short local device name. */ -#define BLE_GAP_AD_TYPE_COMPLETE_LOCAL_NAME 0x09 /**< Complete local device name. */ -#define BLE_GAP_AD_TYPE_TX_POWER_LEVEL 0x0A /**< Transmit power level. */ -#define BLE_GAP_AD_TYPE_CLASS_OF_DEVICE 0x0D /**< Class of device. */ -#define BLE_GAP_AD_TYPE_SIMPLE_PAIRING_HASH_C 0x0E /**< Simple Pairing Hash C. */ -#define BLE_GAP_AD_TYPE_SIMPLE_PAIRING_RANDOMIZER_R 0x0F /**< Simple Pairing Randomizer R. */ -#define BLE_GAP_AD_TYPE_SECURITY_MANAGER_TK_VALUE 0x10 /**< Security Manager TK Value. */ -#define BLE_GAP_AD_TYPE_SECURITY_MANAGER_OOB_FLAGS 0x11 /**< Security Manager Out Of Band Flags. */ -#define BLE_GAP_AD_TYPE_SLAVE_CONNECTION_INTERVAL_RANGE 0x12 /**< Slave Connection Interval Range. */ -#define BLE_GAP_AD_TYPE_SOLICITED_SERVICE_UUIDS_16BIT 0x14 /**< List of 16-bit Service Solicitation UUIDs. */ -#define BLE_GAP_AD_TYPE_SOLICITED_SERVICE_UUIDS_128BIT 0x15 /**< List of 128-bit Service Solicitation UUIDs. */ -#define BLE_GAP_AD_TYPE_SERVICE_DATA 0x16 /**< Service Data - 16-bit UUID. */ -#define BLE_GAP_AD_TYPE_PUBLIC_TARGET_ADDRESS 0x17 /**< Public Target Address. */ -#define BLE_GAP_AD_TYPE_RANDOM_TARGET_ADDRESS 0x18 /**< Random Target Address. */ -#define BLE_GAP_AD_TYPE_APPEARANCE 0x19 /**< Appearance. */ -#define BLE_GAP_AD_TYPE_ADVERTISING_INTERVAL 0x1A /**< Advertising Interval. */ -#define BLE_GAP_AD_TYPE_LE_BLUETOOTH_DEVICE_ADDRESS 0x1B /**< LE Bluetooth Device Address. */ -#define BLE_GAP_AD_TYPE_LE_ROLE 0x1C /**< LE Role. */ -#define BLE_GAP_AD_TYPE_SIMPLE_PAIRING_HASH_C256 0x1D /**< Simple Pairing Hash C-256. */ -#define BLE_GAP_AD_TYPE_SIMPLE_PAIRING_RANDOMIZER_R256 0x1E /**< Simple Pairing Randomizer R-256. */ -#define BLE_GAP_AD_TYPE_SERVICE_DATA_32BIT_UUID 0x20 /**< Service Data - 32-bit UUID. */ -#define BLE_GAP_AD_TYPE_SERVICE_DATA_128BIT_UUID 0x21 /**< Service Data - 128-bit UUID. */ -#define BLE_GAP_AD_TYPE_LESC_CONFIRMATION_VALUE 0x22 /**< LE Secure Connections Confirmation Value */ -#define BLE_GAP_AD_TYPE_LESC_RANDOM_VALUE 0x23 /**< LE Secure Connections Random Value */ -#define BLE_GAP_AD_TYPE_URI 0x24 /**< URI */ -#define BLE_GAP_AD_TYPE_3D_INFORMATION_DATA 0x3D /**< 3D Information Data. */ -#define BLE_GAP_AD_TYPE_MANUFACTURER_SPECIFIC_DATA 0xFF /**< Manufacturer Specific Data. */ -/**@} */ - - -/**@defgroup BLE_GAP_ADV_FLAGS GAP Advertisement Flags - * @{ */ -#define BLE_GAP_ADV_FLAG_LE_LIMITED_DISC_MODE (0x01) /**< LE Limited Discoverable Mode. */ -#define BLE_GAP_ADV_FLAG_LE_GENERAL_DISC_MODE (0x02) /**< LE General Discoverable Mode. */ -#define BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED (0x04) /**< BR/EDR not supported. */ -#define BLE_GAP_ADV_FLAG_LE_BR_EDR_CONTROLLER (0x08) /**< Simultaneous LE and BR/EDR, Controller. */ -#define BLE_GAP_ADV_FLAG_LE_BR_EDR_HOST (0x10) /**< Simultaneous LE and BR/EDR, Host. */ -#define BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE (BLE_GAP_ADV_FLAG_LE_LIMITED_DISC_MODE | BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED) /**< LE Limited Discoverable Mode, BR/EDR not supported. */ -#define BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE (BLE_GAP_ADV_FLAG_LE_GENERAL_DISC_MODE | BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED) /**< LE General Discoverable Mode, BR/EDR not supported. */ -/**@} */ - - -/**@defgroup BLE_GAP_ADV_INTERVALS GAP Advertising interval max and min - * @{ */ -#define BLE_GAP_ADV_INTERVAL_MIN 0x000020 /**< Minimum Advertising interval in 625 us units, i.e. 20 ms. */ -#define BLE_GAP_ADV_INTERVAL_MAX 0x004000 /**< Maximum Advertising interval in 625 us units, i.e. 10.24 s. */ - /**@} */ - - -/**@defgroup BLE_GAP_SCAN_INTERVALS GAP Scan interval max and min - * @{ */ -#define BLE_GAP_SCAN_INTERVAL_MIN 0x0004 /**< Minimum Scan interval in 625 us units, i.e. 2.5 ms. */ -#define BLE_GAP_SCAN_INTERVAL_MAX 0xFFFF /**< Maximum Scan interval in 625 us units, i.e. 40,959.375 s. */ - /** @} */ - - -/**@defgroup BLE_GAP_SCAN_WINDOW GAP Scan window max and min - * @{ */ -#define BLE_GAP_SCAN_WINDOW_MIN 0x0004 /**< Minimum Scan window in 625 us units, i.e. 2.5 ms. */ -#define BLE_GAP_SCAN_WINDOW_MAX 0xFFFF /**< Maximum Scan window in 625 us units, i.e. 40,959.375 s. */ - /** @} */ - - -/**@defgroup BLE_GAP_SCAN_TIMEOUT GAP Scan timeout max and min - * @{ */ -#define BLE_GAP_SCAN_TIMEOUT_MIN 0x0001 /**< Minimum Scan timeout in 10 ms units, i.e 10 ms. */ -#define BLE_GAP_SCAN_TIMEOUT_UNLIMITED 0x0000 /**< Continue to scan forever. */ - /** @} */ - -/**@defgroup BLE_GAP_SCAN_BUFFER_SIZE GAP Minimum scanner buffer size - * - * Scan buffers are used for storing advertising data received from an advertiser. - * If ble_gap_scan_params_t::extended is set to 0, @ref BLE_GAP_SCAN_BUFFER_MIN is the minimum scan buffer length. - * else the minimum scan buffer size is @ref BLE_GAP_SCAN_BUFFER_EXTENDED_MIN. - * @{ */ -#define BLE_GAP_SCAN_BUFFER_MIN (31) /**< Minimum data length for an - advertising set. */ -#define BLE_GAP_SCAN_BUFFER_MAX (31) /**< Maximum data length for an - advertising set. */ -#define BLE_GAP_SCAN_BUFFER_EXTENDED_MIN (255) /**< Minimum data length for an - extended advertising set. */ -#define BLE_GAP_SCAN_BUFFER_EXTENDED_MAX (1650) /**< Maximum data length for an - extended advertising set. */ -#define BLE_GAP_SCAN_BUFFER_EXTENDED_MAX_SUPPORTED (255) /**< Maximum supported data length for - an extended advertising set. */ -/** @} */ - -/**@defgroup BLE_GAP_ADV_TYPES GAP Advertising types - * - * Advertising types defined in Bluetooth Core Specification v5.0, Vol 6, Part B, Section 4.4.2. - * - * The maximum advertising data length is defined by @ref BLE_GAP_ADV_SET_DATA_SIZE_MAX. - * The maximum supported data length for an extended advertiser is defined by - * @ref BLE_GAP_ADV_SET_DATA_SIZE_EXTENDED_MAX_SUPPORTED - * Note that some of the advertising types do not support advertising data. Non-scannable types do not support - * scan response data. - * - * @{ */ -#define BLE_GAP_ADV_TYPE_CONNECTABLE_SCANNABLE_UNDIRECTED 0x01 /**< Connectable and scannable undirected - advertising events. */ -#define BLE_GAP_ADV_TYPE_CONNECTABLE_NONSCANNABLE_DIRECTED_HIGH_DUTY_CYCLE 0x02 /**< Connectable non-scannable directed advertising - events. Advertising interval is less that 3.75 ms. - Use this type for fast reconnections. - @note Advertising data is not supported. */ -#define BLE_GAP_ADV_TYPE_CONNECTABLE_NONSCANNABLE_DIRECTED 0x03 /**< Connectable non-scannable directed advertising - events. - @note Advertising data is not supported. */ -#define BLE_GAP_ADV_TYPE_NONCONNECTABLE_SCANNABLE_UNDIRECTED 0x04 /**< Non-connectable scannable undirected - advertising events. */ -#define BLE_GAP_ADV_TYPE_NONCONNECTABLE_NONSCANNABLE_UNDIRECTED 0x05 /**< Non-connectable non-scannable undirected - advertising events. */ -#define BLE_GAP_ADV_TYPE_EXTENDED_CONNECTABLE_NONSCANNABLE_UNDIRECTED 0x06 /**< Connectable non-scannable undirected advertising - events using extended advertising PDUs. */ -#define BLE_GAP_ADV_TYPE_EXTENDED_CONNECTABLE_NONSCANNABLE_DIRECTED 0x07 /**< Connectable non-scannable directed advertising - events using extended advertising PDUs. */ -#define BLE_GAP_ADV_TYPE_EXTENDED_NONCONNECTABLE_SCANNABLE_UNDIRECTED 0x08 /**< Non-connectable scannable undirected advertising - events using extended advertising PDUs. - @note Only scan response data is supported. */ -#define BLE_GAP_ADV_TYPE_EXTENDED_NONCONNECTABLE_SCANNABLE_DIRECTED 0x09 /**< Non-connectable scannable directed advertising - events using extended advertising PDUs. - @note Only scan response data is supported. */ -#define BLE_GAP_ADV_TYPE_EXTENDED_NONCONNECTABLE_NONSCANNABLE_UNDIRECTED 0x0A /**< Non-connectable non-scannable undirected advertising - events using extended advertising PDUs. */ -#define BLE_GAP_ADV_TYPE_EXTENDED_NONCONNECTABLE_NONSCANNABLE_DIRECTED 0x0B /**< Non-connectable non-scannable directed advertising - events using extended advertising PDUs. */ -/**@} */ - -/**@defgroup BLE_GAP_ADV_FILTER_POLICIES GAP Advertising filter policies - * @{ */ -#define BLE_GAP_ADV_FP_ANY 0x00 /**< Allow scan requests and connect requests from any device. */ -#define BLE_GAP_ADV_FP_FILTER_SCANREQ 0x01 /**< Filter scan requests with whitelist. */ -#define BLE_GAP_ADV_FP_FILTER_CONNREQ 0x02 /**< Filter connect requests with whitelist. */ -#define BLE_GAP_ADV_FP_FILTER_BOTH 0x03 /**< Filter both scan and connect requests with whitelist. */ -/**@} */ - -/**@defgroup BLE_GAP_ADV_DATA_STATUS GAP Advertising data status - * @{ */ -#define BLE_GAP_ADV_DATA_STATUS_COMPLETE 0x00 /**< All data in the advertising event have been received. */ -#define BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA 0x01 /**< More data to be received. - @note This value will only be used if - @ref ble_gap_scan_params_t::report_incomplete_evts and - @ref ble_gap_adv_report_type_t::extended_pdu are set to true. */ -#define BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_TRUNCATED 0x02 /**< Incomplete data. Buffer size insufficient to receive more. - @note This value will only be used if - @ref ble_gap_adv_report_type_t::extended_pdu is set to true. */ -#define BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MISSED 0x03 /**< Failed to receive the remaining data. - @note This value will only be used if - @ref ble_gap_adv_report_type_t::extended_pdu is set to true. */ -/**@} */ - -/**@defgroup BLE_GAP_SCAN_FILTER_POLICIES GAP Scanner filter policies - * @{ */ -#define BLE_GAP_SCAN_FP_ACCEPT_ALL 0x00 /**< Accept all advertising packets except directed advertising packets - not addressed to this device. */ -#define BLE_GAP_SCAN_FP_WHITELIST 0x01 /**< Accept advertising packets from devices in the whitelist except directed - packets not addressed to this device. */ -#define BLE_GAP_SCAN_FP_ALL_NOT_RESOLVED_DIRECTED 0x02 /**< Accept all advertising packets specified in @ref BLE_GAP_SCAN_FP_ACCEPT_ALL. - In addition, accept directed advertising packets, where the advertiser's - address is a resolvable private address that cannot be resolved. */ -#define BLE_GAP_SCAN_FP_WHITELIST_NOT_RESOLVED_DIRECTED 0x03 /**< Accept all advertising packets specified in @ref BLE_GAP_SCAN_FP_WHITELIST. - In addition, accept directed advertising packets, where the advertiser's - address is a resolvable private address that cannot be resolved. */ -/**@} */ - -/**@defgroup BLE_GAP_ADV_TIMEOUT_VALUES GAP Advertising timeout values in 10 ms units - * @{ */ -#define BLE_GAP_ADV_TIMEOUT_HIGH_DUTY_MAX (128) /**< Maximum high duty advertising time in 10 ms units. Corresponds to 1.28 s. */ -#define BLE_GAP_ADV_TIMEOUT_LIMITED_MAX (18000) /**< Maximum advertising time in 10 ms units corresponding to TGAP(lim_adv_timeout) = 180 s in limited discoverable mode. */ -#define BLE_GAP_ADV_TIMEOUT_GENERAL_UNLIMITED (0) /**< Unlimited advertising in general discoverable mode. - For high duty cycle advertising, this corresponds to @ref BLE_GAP_ADV_TIMEOUT_HIGH_DUTY_MAX. */ -/**@} */ - - -/**@defgroup BLE_GAP_DISC_MODES GAP Discovery modes - * @{ */ -#define BLE_GAP_DISC_MODE_NOT_DISCOVERABLE 0x00 /**< Not discoverable discovery Mode. */ -#define BLE_GAP_DISC_MODE_LIMITED 0x01 /**< Limited Discovery Mode. */ -#define BLE_GAP_DISC_MODE_GENERAL 0x02 /**< General Discovery Mode. */ -/**@} */ - - -/**@defgroup BLE_GAP_IO_CAPS GAP IO Capabilities - * @{ */ -#define BLE_GAP_IO_CAPS_DISPLAY_ONLY 0x00 /**< Display Only. */ -#define BLE_GAP_IO_CAPS_DISPLAY_YESNO 0x01 /**< Display and Yes/No entry. */ -#define BLE_GAP_IO_CAPS_KEYBOARD_ONLY 0x02 /**< Keyboard Only. */ -#define BLE_GAP_IO_CAPS_NONE 0x03 /**< No I/O capabilities. */ -#define BLE_GAP_IO_CAPS_KEYBOARD_DISPLAY 0x04 /**< Keyboard and Display. */ -/**@} */ - - -/**@defgroup BLE_GAP_AUTH_KEY_TYPES GAP Authentication Key Types - * @{ */ -#define BLE_GAP_AUTH_KEY_TYPE_NONE 0x00 /**< No key (may be used to reject). */ -#define BLE_GAP_AUTH_KEY_TYPE_PASSKEY 0x01 /**< 6-digit Passkey. */ -#define BLE_GAP_AUTH_KEY_TYPE_OOB 0x02 /**< Out Of Band data. */ -/**@} */ - - -/**@defgroup BLE_GAP_KP_NOT_TYPES GAP Keypress Notification Types - * @{ */ -#define BLE_GAP_KP_NOT_TYPE_PASSKEY_START 0x00 /**< Passkey entry started. */ -#define BLE_GAP_KP_NOT_TYPE_PASSKEY_DIGIT_IN 0x01 /**< Passkey digit entered. */ -#define BLE_GAP_KP_NOT_TYPE_PASSKEY_DIGIT_OUT 0x02 /**< Passkey digit erased. */ -#define BLE_GAP_KP_NOT_TYPE_PASSKEY_CLEAR 0x03 /**< Passkey cleared. */ -#define BLE_GAP_KP_NOT_TYPE_PASSKEY_END 0x04 /**< Passkey entry completed. */ -/**@} */ - - -/**@defgroup BLE_GAP_SEC_STATUS GAP Security status - * @{ */ -#define BLE_GAP_SEC_STATUS_SUCCESS 0x00 /**< Procedure completed with success. */ -#define BLE_GAP_SEC_STATUS_TIMEOUT 0x01 /**< Procedure timed out. */ -#define BLE_GAP_SEC_STATUS_PDU_INVALID 0x02 /**< Invalid PDU received. */ -#define BLE_GAP_SEC_STATUS_RFU_RANGE1_BEGIN 0x03 /**< Reserved for Future Use range #1 begin. */ -#define BLE_GAP_SEC_STATUS_RFU_RANGE1_END 0x80 /**< Reserved for Future Use range #1 end. */ -#define BLE_GAP_SEC_STATUS_PASSKEY_ENTRY_FAILED 0x81 /**< Passkey entry failed (user canceled or other). */ -#define BLE_GAP_SEC_STATUS_OOB_NOT_AVAILABLE 0x82 /**< Out of Band Key not available. */ -#define BLE_GAP_SEC_STATUS_AUTH_REQ 0x83 /**< Authentication requirements not met. */ -#define BLE_GAP_SEC_STATUS_CONFIRM_VALUE 0x84 /**< Confirm value failed. */ -#define BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP 0x85 /**< Pairing not supported. */ -#define BLE_GAP_SEC_STATUS_ENC_KEY_SIZE 0x86 /**< Encryption key size. */ -#define BLE_GAP_SEC_STATUS_SMP_CMD_UNSUPPORTED 0x87 /**< Unsupported SMP command. */ -#define BLE_GAP_SEC_STATUS_UNSPECIFIED 0x88 /**< Unspecified reason. */ -#define BLE_GAP_SEC_STATUS_REPEATED_ATTEMPTS 0x89 /**< Too little time elapsed since last attempt. */ -#define BLE_GAP_SEC_STATUS_INVALID_PARAMS 0x8A /**< Invalid parameters. */ -#define BLE_GAP_SEC_STATUS_DHKEY_FAILURE 0x8B /**< DHKey check failure. */ -#define BLE_GAP_SEC_STATUS_NUM_COMP_FAILURE 0x8C /**< Numeric Comparison failure. */ -#define BLE_GAP_SEC_STATUS_BR_EDR_IN_PROG 0x8D /**< BR/EDR pairing in progress. */ -#define BLE_GAP_SEC_STATUS_X_TRANS_KEY_DISALLOWED 0x8E /**< BR/EDR Link Key cannot be used for LE keys. */ -#define BLE_GAP_SEC_STATUS_RFU_RANGE2_BEGIN 0x8F /**< Reserved for Future Use range #2 begin. */ -#define BLE_GAP_SEC_STATUS_RFU_RANGE2_END 0xFF /**< Reserved for Future Use range #2 end. */ -/**@} */ - - -/**@defgroup BLE_GAP_SEC_STATUS_SOURCES GAP Security status sources - * @{ */ -#define BLE_GAP_SEC_STATUS_SOURCE_LOCAL 0x00 /**< Local failure. */ -#define BLE_GAP_SEC_STATUS_SOURCE_REMOTE 0x01 /**< Remote failure. */ -/**@} */ - - -/**@defgroup BLE_GAP_CP_LIMITS GAP Connection Parameters Limits - * @{ */ -#define BLE_GAP_CP_MIN_CONN_INTVL_NONE 0xFFFF /**< No new minimum connection interval specified in connect parameters. */ -#define BLE_GAP_CP_MIN_CONN_INTVL_MIN 0x0006 /**< Lowest minimum connection interval permitted, in units of 1.25 ms, i.e. 7.5 ms. */ -#define BLE_GAP_CP_MIN_CONN_INTVL_MAX 0x0C80 /**< Highest minimum connection interval permitted, in units of 1.25 ms, i.e. 4 s. */ -#define BLE_GAP_CP_MAX_CONN_INTVL_NONE 0xFFFF /**< No new maximum connection interval specified in connect parameters. */ -#define BLE_GAP_CP_MAX_CONN_INTVL_MIN 0x0006 /**< Lowest maximum connection interval permitted, in units of 1.25 ms, i.e. 7.5 ms. */ -#define BLE_GAP_CP_MAX_CONN_INTVL_MAX 0x0C80 /**< Highest maximum connection interval permitted, in units of 1.25 ms, i.e. 4 s. */ -#define BLE_GAP_CP_SLAVE_LATENCY_MAX 0x01F3 /**< Highest slave latency permitted, in connection events. */ -#define BLE_GAP_CP_CONN_SUP_TIMEOUT_NONE 0xFFFF /**< No new supervision timeout specified in connect parameters. */ -#define BLE_GAP_CP_CONN_SUP_TIMEOUT_MIN 0x000A /**< Lowest supervision timeout permitted, in units of 10 ms, i.e. 100 ms. */ -#define BLE_GAP_CP_CONN_SUP_TIMEOUT_MAX 0x0C80 /**< Highest supervision timeout permitted, in units of 10 ms, i.e. 32 s. */ -/**@} */ - - -/**@defgroup BLE_GAP_DEVNAME GAP device name defines. - * @{ */ -#define BLE_GAP_DEVNAME_DEFAULT "nRF5x" /**< Default device name value. */ -#define BLE_GAP_DEVNAME_DEFAULT_LEN 31 /**< Default number of octets in device name. */ -#define BLE_GAP_DEVNAME_MAX_LEN 248 /**< Maximum number of octets in device name. */ -/**@} */ - - -/**@brief Disable RSSI events for connections */ -#define BLE_GAP_RSSI_THRESHOLD_INVALID 0xFF - -/**@defgroup BLE_GAP_PHYS GAP PHYs - * @{ */ -#define BLE_GAP_PHY_AUTO 0x00 /**< Automatic PHY selection. Refer @ref sd_ble_gap_phy_update for more information.*/ -#define BLE_GAP_PHY_1MBPS 0x01 /**< 1 Mbps PHY. */ -#define BLE_GAP_PHY_2MBPS 0x02 /**< 2 Mbps PHY. */ -#define BLE_GAP_PHY_CODED 0x04 /**< Coded PHY. */ -#define BLE_GAP_PHY_NOT_SET 0xFF /**< PHY is not configured. */ - -/**@brief Supported PHYs in connections, for scanning, and for advertising. */ -#define BLE_GAP_PHYS_SUPPORTED (BLE_GAP_PHY_1MBPS | BLE_GAP_PHY_2MBPS | BLE_GAP_PHY_CODED) /**< All PHYs are supported. */ - -/**@} */ - -/**@defgroup BLE_GAP_CONN_SEC_MODE_SET_MACROS GAP attribute security requirement setters - * - * See @ref ble_gap_conn_sec_mode_t. - * @{ */ -/**@brief Set sec_mode pointed to by ptr to have no access rights.*/ -#define BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(ptr) do {(ptr)->sm = 0; (ptr)->lv = 0;} while(0) -/**@brief Set sec_mode pointed to by ptr to require no protection, open link.*/ -#define BLE_GAP_CONN_SEC_MODE_SET_OPEN(ptr) do {(ptr)->sm = 1; (ptr)->lv = 1;} while(0) -/**@brief Set sec_mode pointed to by ptr to require encryption, but no MITM protection.*/ -#define BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(ptr) do {(ptr)->sm = 1; (ptr)->lv = 2;} while(0) -/**@brief Set sec_mode pointed to by ptr to require encryption and MITM protection.*/ -#define BLE_GAP_CONN_SEC_MODE_SET_ENC_WITH_MITM(ptr) do {(ptr)->sm = 1; (ptr)->lv = 3;} while(0) -/**@brief Set sec_mode pointed to by ptr to require LESC encryption and MITM protection.*/ -#define BLE_GAP_CONN_SEC_MODE_SET_LESC_ENC_WITH_MITM(ptr) do {(ptr)->sm = 1; (ptr)->lv = 4;} while(0) -/**@brief Set sec_mode pointed to by ptr to require signing or encryption, no MITM protection needed.*/ -#define BLE_GAP_CONN_SEC_MODE_SET_SIGNED_NO_MITM(ptr) do {(ptr)->sm = 2; (ptr)->lv = 1;} while(0) -/**@brief Set sec_mode pointed to by ptr to require signing or encryption with MITM protection.*/ -#define BLE_GAP_CONN_SEC_MODE_SET_SIGNED_WITH_MITM(ptr) do {(ptr)->sm = 2; (ptr)->lv = 2;} while(0) -/**@} */ - - -/**@brief GAP Security Random Number Length. */ -#define BLE_GAP_SEC_RAND_LEN 8 - - -/**@brief GAP Security Key Length. */ -#define BLE_GAP_SEC_KEY_LEN 16 - - -/**@brief GAP LE Secure Connections Elliptic Curve Diffie-Hellman P-256 Public Key Length. */ -#define BLE_GAP_LESC_P256_PK_LEN 64 - - -/**@brief GAP LE Secure Connections Elliptic Curve Diffie-Hellman DHKey Length. */ -#define BLE_GAP_LESC_DHKEY_LEN 32 - - -/**@brief GAP Passkey Length. */ -#define BLE_GAP_PASSKEY_LEN 6 - - -/**@brief Maximum amount of addresses in the whitelist. */ -#define BLE_GAP_WHITELIST_ADDR_MAX_COUNT (8) - - -/**@brief Maximum amount of identities in the device identities list. */ -#define BLE_GAP_DEVICE_IDENTITIES_MAX_COUNT (8) - - -/**@brief Default connection count for a configuration. */ -#define BLE_GAP_CONN_COUNT_DEFAULT (1) - - -/**@defgroup BLE_GAP_EVENT_LENGTH GAP event length defines. - * @{ */ -#define BLE_GAP_EVENT_LENGTH_MIN (2) /**< Minimum event length, in 1.25 ms units. */ -#define BLE_GAP_EVENT_LENGTH_CODED_PHY_MIN (6) /**< The shortest event length in 1.25 ms units supporting LE Coded PHY. */ -#define BLE_GAP_EVENT_LENGTH_DEFAULT (3) /**< Default event length, in 1.25 ms units. */ -/**@} */ - - -/**@defgroup BLE_GAP_ROLE_COUNT GAP concurrent connection count defines. - * @{ */ -#define BLE_GAP_ROLE_COUNT_PERIPH_DEFAULT (1) /**< Default maximum number of connections concurrently acting as peripherals. */ -#define BLE_GAP_ROLE_COUNT_CENTRAL_DEFAULT (3) /**< Default maximum number of connections concurrently acting as centrals. */ -#define BLE_GAP_ROLE_COUNT_CENTRAL_SEC_DEFAULT (1) /**< Default number of SMP instances shared between all connections acting as centrals. */ -#define BLE_GAP_ROLE_COUNT_COMBINED_MAX (20) /**< Maximum supported number of concurrent connections in the peripheral and central roles combined. */ - -/**@} */ - -/**@brief Automatic data length parameter. */ -#define BLE_GAP_DATA_LENGTH_AUTO 0 - -/**@defgroup BLE_GAP_AUTH_PAYLOAD_TIMEOUT Authenticated payload timeout defines. - * @{ */ -#define BLE_GAP_AUTH_PAYLOAD_TIMEOUT_MAX (48000) /**< Maximum authenticated payload timeout in 10 ms units, i.e. 8 minutes. */ -#define BLE_GAP_AUTH_PAYLOAD_TIMEOUT_MIN (1) /**< Minimum authenticated payload timeout in 10 ms units, i.e. 10 ms. */ -/**@} */ - -/**@defgroup GAP_SEC_MODES GAP Security Modes - * @{ */ -#define BLE_GAP_SEC_MODE 0x00 /**< No key (may be used to reject). */ -/**@} */ - -/**@brief The total number of channels in Bluetooth Low Energy. */ -#define BLE_GAP_CHANNEL_COUNT (40) - -/**@defgroup BLE_GAP_QOS_CHANNEL_SURVEY_INTERVALS Quality of Service (QoS) Channel survey interval defines - * @{ */ -#define BLE_GAP_QOS_CHANNEL_SURVEY_INTERVAL_CONTINUOUS (0) /**< Continuous channel survey. */ -#define BLE_GAP_QOS_CHANNEL_SURVEY_INTERVAL_MIN_US (7500) /**< Minimum channel survey interval in microseconds (7.5 ms). */ -#define BLE_GAP_QOS_CHANNEL_SURVEY_INTERVAL_MAX_US (4000000) /**< Maximum channel survey interval in microseconds (4 s). */ - /**@} */ - -/** @} */ - - -/**@addtogroup BLE_GAP_STRUCTURES Structures - * @{ */ - -/**@brief Advertising event properties. */ -typedef struct -{ - uint8_t type; /**< Advertising type. See @ref BLE_GAP_ADV_TYPES. */ - uint8_t anonymous : 1; /**< Omit advertiser's address from all PDUs. - @note Anonymous advertising is only available for - @ref BLE_GAP_ADV_TYPE_EXTENDED_NONCONNECTABLE_NONSCANNABLE_UNDIRECTED and - @ref BLE_GAP_ADV_TYPE_EXTENDED_NONCONNECTABLE_NONSCANNABLE_DIRECTED. */ - uint8_t include_tx_power : 1; /**< This feature is not supported on this SoftDevice. */ -} ble_gap_adv_properties_t; - - -/**@brief Advertising report type. */ -typedef struct -{ - uint16_t connectable : 1; /**< Connectable advertising event type. */ - uint16_t scannable : 1; /**< Scannable advertising event type. */ - uint16_t directed : 1; /**< Directed advertising event type. */ - uint16_t scan_response : 1; /**< Received a scan response. */ - uint16_t extended_pdu : 1; /**< Received an extended advertising set. */ - uint16_t status : 2; /**< Data status. See @ref BLE_GAP_ADV_DATA_STATUS. */ - uint16_t reserved : 9; /**< Reserved for future use. */ -} ble_gap_adv_report_type_t; - -/**@brief Advertising Auxiliary Pointer. */ -typedef struct -{ - uint16_t aux_offset; /**< Time offset from the beginning of advertising packet to the auxiliary packet in 100 us units. */ - uint8_t aux_phy; /**< Indicates the PHY on which the auxiliary advertising packet is sent. See @ref BLE_GAP_PHYS. */ -} ble_gap_aux_pointer_t; - -/**@brief Bluetooth Low Energy address. */ -typedef struct -{ - uint8_t addr_id_peer : 1; /**< Only valid for peer addresses. - This bit is set by the SoftDevice to indicate whether the address has been resolved from - a Resolvable Private Address (when the peer is using privacy). - If set to 1, @ref addr and @ref addr_type refer to the identity address of the resolved address. - - This bit is ignored when a variable of type @ref ble_gap_addr_t is used as input to API functions. */ - uint8_t addr_type : 7; /**< See @ref BLE_GAP_ADDR_TYPES. */ - uint8_t addr[BLE_GAP_ADDR_LEN]; /**< 48-bit address, LSB format. - @ref addr is not used if @ref addr_type is @ref BLE_GAP_ADDR_TYPE_ANONYMOUS. */ -} ble_gap_addr_t; - - -/**@brief GAP connection parameters. - * - * @note When ble_conn_params_t is received in an event, both min_conn_interval and - * max_conn_interval will be equal to the connection interval set by the central. - * - * @note If both conn_sup_timeout and max_conn_interval are specified, then the following constraint applies: - * conn_sup_timeout * 4 > (1 + slave_latency) * max_conn_interval - * that corresponds to the following Bluetooth Spec requirement: - * The Supervision_Timeout in milliseconds shall be larger than - * (1 + Conn_Latency) * Conn_Interval_Max * 2, where Conn_Interval_Max is given in milliseconds. - */ -typedef struct -{ - uint16_t min_conn_interval; /**< Minimum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/ - uint16_t max_conn_interval; /**< Maximum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/ - uint16_t slave_latency; /**< Slave Latency in number of connection events, see @ref BLE_GAP_CP_LIMITS.*/ - uint16_t conn_sup_timeout; /**< Connection Supervision Timeout in 10 ms units, see @ref BLE_GAP_CP_LIMITS.*/ -} ble_gap_conn_params_t; - - -/**@brief GAP connection security modes. - * - * Security Mode 0 Level 0: No access permissions at all (this level is not defined by the Bluetooth Core specification).\n - * Security Mode 1 Level 1: No security is needed (aka open link).\n - * Security Mode 1 Level 2: Encrypted link required, MITM protection not necessary.\n - * Security Mode 1 Level 3: MITM protected encrypted link required.\n - * Security Mode 1 Level 4: LESC MITM protected encrypted link using a 128-bit strength encryption key required.\n - * Security Mode 2 Level 1: Signing or encryption required, MITM protection not necessary.\n - * Security Mode 2 Level 2: MITM protected signing required, unless link is MITM protected encrypted.\n - */ -typedef struct -{ - uint8_t sm : 4; /**< Security Mode (1 or 2), 0 for no permissions at all. */ - uint8_t lv : 4; /**< Level (1, 2, 3 or 4), 0 for no permissions at all. */ - -} ble_gap_conn_sec_mode_t; - - -/**@brief GAP connection security status.*/ -typedef struct -{ - ble_gap_conn_sec_mode_t sec_mode; /**< Currently active security mode for this connection.*/ - uint8_t encr_key_size; /**< Length of currently active encryption key, 7 to 16 octets (only applicable for bonding procedures). */ -} ble_gap_conn_sec_t; - -/**@brief Identity Resolving Key. */ -typedef struct -{ - uint8_t irk[BLE_GAP_SEC_KEY_LEN]; /**< Array containing IRK. */ -} ble_gap_irk_t; - - -/**@brief Channel mask (40 bits). - * Every channel is represented with a bit positioned as per channel index defined in Bluetooth Core Specification v5.0, - * Vol 6, Part B, Section 1.4.1. The LSB contained in array element 0 represents channel index 0, and bit 39 represents - * channel index 39. If a bit is set to 1, the channel is not used. - */ -typedef uint8_t ble_gap_ch_mask_t[5]; - - -/**@brief GAP advertising parameters. */ -typedef struct -{ - ble_gap_adv_properties_t properties; /**< The properties of the advertising events. */ - ble_gap_addr_t const *p_peer_addr; /**< Address of a known peer. - @note ble_gap_addr_t::addr_type cannot be - @ref BLE_GAP_ADDR_TYPE_ANONYMOUS. - - When privacy is enabled and the local device uses - @ref BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE addresses, - the device identity list is searched for a matching entry. If - the local IRK for that device identity is set, the local IRK - for that device will be used to generate the advertiser address - field in the advertising packet. - - If @ref ble_gap_adv_properties_t::type is directed, this must be - set to the targeted scanner or initiator. If the peer address is - in the device identity list, the peer IRK for that device will be - used to generate @ref BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE - target addresses used in the advertising event PDUs. */ - uint32_t interval; /**< Advertising interval in 625 us units. @sa BLE_GAP_ADV_INTERVALS. - @note If @ref ble_gap_adv_properties_t::type is set to - @ref BLE_GAP_ADV_TYPE_CONNECTABLE_NONSCANNABLE_DIRECTED_HIGH_DUTY_CYCLE - advertising, this parameter is ignored. */ - uint16_t duration; /**< Advertising duration in 10 ms units. When timeout is reached, - an event of type @ref BLE_GAP_EVT_ADV_SET_TERMINATED is raised. - @sa BLE_GAP_ADV_TIMEOUT_VALUES. - @note The SoftDevice will always complete at least one advertising - event even if the duration is set too low. */ - uint8_t max_adv_evts; /**< Maximum advertising events that shall be sent prior to disabling - advertising. Setting the value to 0 disables the limitation. When - the count of advertising events specified by this parameter - (if not 0) is reached, advertising will be automatically stopped - and an event of type @ref BLE_GAP_EVT_ADV_SET_TERMINATED is raised - @note If @ref ble_gap_adv_properties_t::type is set to - @ref BLE_GAP_ADV_TYPE_CONNECTABLE_NONSCANNABLE_DIRECTED_HIGH_DUTY_CYCLE, - this parameter is ignored. */ - ble_gap_ch_mask_t channel_mask; /**< Channel mask for primary and secondary advertising channels. - At least one of the primary channels, that is channel index 37-39, must be used. - Masking away secondary advertising channels is not supported. */ - uint8_t filter_policy; /**< Filter Policy. @sa BLE_GAP_ADV_FILTER_POLICIES. */ - uint8_t primary_phy; /**< Indicates the PHY on which the primary advertising channel packets - are transmitted. If set to @ref BLE_GAP_PHY_AUTO, @ref BLE_GAP_PHY_1MBPS - will be used. - Valid values are @ref BLE_GAP_PHY_1MBPS and @ref BLE_GAP_PHY_CODED. - @note The primary_phy shall indicate @ref BLE_GAP_PHY_1MBPS if - @ref ble_gap_adv_properties_t::type is not an extended advertising type. */ - uint8_t secondary_phy; /**< Indicates the PHY on which the secondary advertising channel packets - are transmitted. - If set to @ref BLE_GAP_PHY_AUTO, @ref BLE_GAP_PHY_1MBPS will be used. - Valid values are - @ref BLE_GAP_PHY_1MBPS, @ref BLE_GAP_PHY_2MBPS, and @ref BLE_GAP_PHY_CODED. - If @ref ble_gap_adv_properties_t::type is an extended advertising type - and connectable, this is the PHY that will be used to establish a - connection and send AUX_ADV_IND packets on. - @note This parameter will be ignored when - @ref ble_gap_adv_properties_t::type is not an extended advertising type. */ - uint8_t set_id:4; /**< The advertising set identifier distinguishes this advertising set from other - advertising sets transmitted by this and other devices. - @note This parameter will be ignored when - @ref ble_gap_adv_properties_t::type is not an extended advertising type. */ - uint8_t scan_req_notification:1; /**< Enable scan request notifications for this advertising set. When a - scan request is received and the scanner address is allowed - by the filter policy, @ref BLE_GAP_EVT_SCAN_REQ_REPORT is raised. - @note This parameter will be ignored when - @ref ble_gap_adv_properties_t::type is a non-scannable - advertising type. */ -} ble_gap_adv_params_t; - - -/**@brief GAP advertising data buffers. - * - * The application must provide the buffers for advertisement. The memory shall reside in application RAM, and - * shall never be modified while advertising. The data shall be kept alive until either: - * - @ref BLE_GAP_EVT_ADV_SET_TERMINATED is raised. - * - @ref BLE_GAP_EVT_CONNECTED is raised with @ref ble_gap_evt_connected_t::adv_handle set to the corresponding - * advertising handle. - * - Advertising is stopped. - * - Advertising data is changed. - * To update advertising data while advertising, provide new buffers to @ref sd_ble_gap_adv_set_configure. */ -typedef struct -{ - ble_data_t adv_data; /**< Advertising data. - @note - Advertising data can only be specified for a @ref ble_gap_adv_properties_t::type - that is allowed to contain advertising data. */ - ble_data_t scan_rsp_data; /**< Scan response data. - @note - Scan response data can only be specified for a @ref ble_gap_adv_properties_t::type - that is scannable. */ -} ble_gap_adv_data_t; - - -/**@brief GAP scanning parameters. */ -typedef struct -{ - uint8_t extended : 1; /**< If 1, the scanner will accept extended advertising packets. - If set to 0, the scanner will not receive advertising packets - on secondary advertising channels, and will not be able - to receive long advertising PDUs. */ - uint8_t report_incomplete_evts : 1; /**< If 1, events of type @ref ble_gap_evt_adv_report_t may have - @ref ble_gap_adv_report_type_t::status set to - @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA. - This parameter is ignored when used with @ref sd_ble_gap_connect - @note This may be used to abort receiving more packets from an extended - advertising event, and is only available for extended - scanning, see @ref sd_ble_gap_scan_start. - @note This feature is not supported by this SoftDevice. */ - uint8_t active : 1; /**< If 1, perform active scanning by sending scan requests. - This parameter is ignored when used with @ref sd_ble_gap_connect. */ - uint8_t filter_policy : 2; /**< Scanning filter policy. @sa BLE_GAP_SCAN_FILTER_POLICIES. - @note Only @ref BLE_GAP_SCAN_FP_ACCEPT_ALL and - @ref BLE_GAP_SCAN_FP_WHITELIST are valid when used with - @ref sd_ble_gap_connect */ - uint8_t scan_phys; /**< Bitfield of PHYs to scan on. If set to @ref BLE_GAP_PHY_AUTO, - scan_phys will default to @ref BLE_GAP_PHY_1MBPS. - - If @ref ble_gap_scan_params_t::extended is set to 0, the only - supported PHY is @ref BLE_GAP_PHY_1MBPS. - - When used with @ref sd_ble_gap_scan_start, - the bitfield indicates the PHYs the scanner will use for scanning - on primary advertising channels. The scanner will accept - @ref BLE_GAP_PHYS_SUPPORTED as secondary advertising channel PHYs. - - When used with @ref sd_ble_gap_connect, the bitfield indicates - the PHYs the initiator will use for scanning on primary advertising - channels. The initiator will accept connections initiated on either - of the @ref BLE_GAP_PHYS_SUPPORTED PHYs. - If scan_phys contains @ref BLE_GAP_PHY_1MBPS and/or @ref BLE_GAP_PHY_2MBPS, - the primary scan PHY is @ref BLE_GAP_PHY_1MBPS. - If scan_phys also contains @ref BLE_GAP_PHY_CODED, the primary scan - PHY will also contain @ref BLE_GAP_PHY_CODED. If the only scan PHY is - @ref BLE_GAP_PHY_CODED, the primary scan PHY is - @ref BLE_GAP_PHY_CODED only. */ - uint16_t interval; /**< Scan interval in 625 us units. @sa BLE_GAP_SCAN_INTERVALS. */ - uint16_t window; /**< Scan window in 625 us units. @sa BLE_GAP_SCAN_WINDOW. - If scan_phys contains both @ref BLE_GAP_PHY_1MBPS and - @ref BLE_GAP_PHY_CODED interval shall be larger than or - equal to twice the scan window. */ - uint16_t timeout; /**< Scan timeout in 10 ms units. @sa BLE_GAP_SCAN_TIMEOUT. */ - ble_gap_ch_mask_t channel_mask; /**< Channel mask for primary and secondary advertising channels. - At least one of the primary channels, that is channel index 37-39, must be - set to 0. - Masking away secondary channels is not supported. */ -} ble_gap_scan_params_t; - - -/**@brief Privacy. - * - * The privacy feature provides a way for the device to avoid being tracked over a period of time. - * The privacy feature, when enabled, hides the local device identity and replaces it with a private address - * that is automatically refreshed at a specified interval. - * - * If a device still wants to be recognized by other peers, it needs to share it's Identity Resolving Key (IRK). - * With this key, a device can generate a random private address that can only be recognized by peers in possession of that key, - * and devices can establish connections without revealing their real identities. - * - * Both network privacy (@ref BLE_GAP_PRIVACY_MODE_NETWORK_PRIVACY) and device privacy (@ref BLE_GAP_PRIVACY_MODE_DEVICE_PRIVACY) - * are supported. - * - * @note If the device IRK is updated, the new IRK becomes the one to be distributed in all - * bonding procedures performed after @ref sd_ble_gap_privacy_set returns. - * The IRK distributed during bonding procedure is the device IRK that is active when @ref sd_ble_gap_sec_params_reply is called. - */ -typedef struct -{ - uint8_t privacy_mode; /**< Privacy mode, see @ref BLE_GAP_PRIVACY_MODES. Default is @ref BLE_GAP_PRIVACY_MODE_OFF. */ - uint8_t private_addr_type; /**< The private address type must be either @ref BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE or @ref BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE. */ - uint16_t private_addr_cycle_s; /**< Private address cycle interval in seconds. Providing an address cycle value of 0 will use the default value defined by @ref BLE_GAP_DEFAULT_PRIVATE_ADDR_CYCLE_INTERVAL_S. */ - ble_gap_irk_t *p_device_irk; /**< When used as input, pointer to IRK structure that will be used as the default IRK. If NULL, the device default IRK will be used. - When used as output, pointer to IRK structure where the current default IRK will be written to. If NULL, this argument is ignored. - By default, the default IRK is used to generate random private resolvable addresses for the local device unless instructed otherwise. */ -} ble_gap_privacy_params_t; - - -/**@brief PHY preferences for TX and RX - * @note tx_phys and rx_phys are bit fields. Multiple bits can be set in them to indicate multiple preferred PHYs for each direction. - * @code - * p_gap_phys->tx_phys = BLE_GAP_PHY_1MBPS | BLE_GAP_PHY_2MBPS; - * p_gap_phys->rx_phys = BLE_GAP_PHY_1MBPS | BLE_GAP_PHY_2MBPS; - * @endcode - * - */ -typedef struct -{ - uint8_t tx_phys; /**< Preferred transmit PHYs, see @ref BLE_GAP_PHYS. */ - uint8_t rx_phys; /**< Preferred receive PHYs, see @ref BLE_GAP_PHYS. */ -} ble_gap_phys_t; - -/** @brief Keys that can be exchanged during a bonding procedure. */ -typedef struct -{ - uint8_t enc : 1; /**< Long Term Key and Master Identification. */ - uint8_t id : 1; /**< Identity Resolving Key and Identity Address Information. */ - uint8_t sign : 1; /**< Connection Signature Resolving Key. */ - uint8_t link : 1; /**< Derive the Link Key from the LTK. */ -} ble_gap_sec_kdist_t; - - -/**@brief GAP security parameters. */ -typedef struct -{ - uint8_t bond : 1; /**< Perform bonding. */ - uint8_t mitm : 1; /**< Enable Man In The Middle protection. */ - uint8_t lesc : 1; /**< Enable LE Secure Connection pairing. */ - uint8_t keypress : 1; /**< Enable generation of keypress notifications. */ - uint8_t io_caps : 3; /**< IO capabilities, see @ref BLE_GAP_IO_CAPS. */ - uint8_t oob : 1; /**< The OOB data flag. - - In LE legacy pairing, this flag is set if a device has out of band authentication data. - The OOB method is used if both of the devices have out of band authentication data. - - In LE Secure Connections pairing, this flag is set if a device has the peer device's out of band authentication data. - The OOB method is used if at least one device has the peer device's OOB data available. */ - uint8_t min_key_size; /**< Minimum encryption key size in octets between 7 and 16. If 0 then not applicable in this instance. */ - uint8_t max_key_size; /**< Maximum encryption key size in octets between min_key_size and 16. */ - ble_gap_sec_kdist_t kdist_own; /**< Key distribution bitmap: keys that the local device will distribute. */ - ble_gap_sec_kdist_t kdist_peer; /**< Key distribution bitmap: keys that the remote device will distribute. */ -} ble_gap_sec_params_t; - - -/**@brief GAP Encryption Information. */ -typedef struct -{ - uint8_t ltk[BLE_GAP_SEC_KEY_LEN]; /**< Long Term Key. */ - uint8_t lesc : 1; /**< Key generated using LE Secure Connections. */ - uint8_t auth : 1; /**< Authenticated Key. */ - uint8_t ltk_len : 6; /**< LTK length in octets. */ -} ble_gap_enc_info_t; - - -/**@brief GAP Master Identification. */ -typedef struct -{ - uint16_t ediv; /**< Encrypted Diversifier. */ - uint8_t rand[BLE_GAP_SEC_RAND_LEN]; /**< Random Number. */ -} ble_gap_master_id_t; - - -/**@brief GAP Signing Information. */ -typedef struct -{ - uint8_t csrk[BLE_GAP_SEC_KEY_LEN]; /**< Connection Signature Resolving Key. */ -} ble_gap_sign_info_t; - - -/**@brief GAP LE Secure Connections P-256 Public Key. */ -typedef struct -{ - uint8_t pk[BLE_GAP_LESC_P256_PK_LEN]; /**< LE Secure Connections Elliptic Curve Diffie-Hellman P-256 Public Key. Stored in the standard SMP protocol format: {X,Y} both in little-endian. */ -} ble_gap_lesc_p256_pk_t; - - -/**@brief GAP LE Secure Connections DHKey. */ -typedef struct -{ - uint8_t key[BLE_GAP_LESC_DHKEY_LEN]; /**< LE Secure Connections Elliptic Curve Diffie-Hellman Key. Stored in little-endian. */ -} ble_gap_lesc_dhkey_t; - - -/**@brief GAP LE Secure Connections OOB data. */ -typedef struct -{ - ble_gap_addr_t addr; /**< Bluetooth address of the device. */ - uint8_t r[BLE_GAP_SEC_KEY_LEN]; /**< Random Number. */ - uint8_t c[BLE_GAP_SEC_KEY_LEN]; /**< Confirm Value. */ -} ble_gap_lesc_oob_data_t; - - -/**@brief Event structure for @ref BLE_GAP_EVT_CONNECTED. */ -typedef struct -{ - ble_gap_addr_t peer_addr; /**< Bluetooth address of the peer device. If the peer_addr resolved: @ref ble_gap_addr_t::addr_id_peer is set to 1 - and the address is the device's identity address. */ - uint8_t role; /**< BLE role for this connection, see @ref BLE_GAP_ROLES */ - ble_gap_conn_params_t conn_params; /**< GAP Connection Parameters. */ - uint8_t adv_handle; /**< Advertising handle in which advertising has ended. - This variable is only set if role is set to @ref BLE_GAP_ROLE_PERIPH. */ - ble_gap_adv_data_t adv_data; /**< Advertising buffers corresponding to the terminated - advertising set. The advertising buffers provided in - @ref sd_ble_gap_adv_set_configure are now released. - This variable is only set if role is set to @ref BLE_GAP_ROLE_PERIPH. */ -} ble_gap_evt_connected_t; - - -/**@brief Event structure for @ref BLE_GAP_EVT_DISCONNECTED. */ -typedef struct -{ - uint8_t reason; /**< HCI error code, see @ref BLE_HCI_STATUS_CODES. */ -} ble_gap_evt_disconnected_t; - - -/**@brief Event structure for @ref BLE_GAP_EVT_CONN_PARAM_UPDATE. */ -typedef struct -{ - ble_gap_conn_params_t conn_params; /**< GAP Connection Parameters. */ -} ble_gap_evt_conn_param_update_t; - -/**@brief Event structure for @ref BLE_GAP_EVT_PHY_UPDATE_REQUEST. */ -typedef struct -{ - ble_gap_phys_t peer_preferred_phys; /**< The PHYs the peer prefers to use. */ -} ble_gap_evt_phy_update_request_t; - -/**@brief Event Structure for @ref BLE_GAP_EVT_PHY_UPDATE. */ -typedef struct -{ - uint8_t status; /**< Status of the procedure, see @ref BLE_HCI_STATUS_CODES.*/ - uint8_t tx_phy; /**< TX PHY for this connection, see @ref BLE_GAP_PHYS. */ - uint8_t rx_phy; /**< RX PHY for this connection, see @ref BLE_GAP_PHYS. */ -} ble_gap_evt_phy_update_t; - -/**@brief Event structure for @ref BLE_GAP_EVT_SEC_PARAMS_REQUEST. */ -typedef struct -{ - ble_gap_sec_params_t peer_params; /**< Initiator Security Parameters. */ -} ble_gap_evt_sec_params_request_t; - - -/**@brief Event structure for @ref BLE_GAP_EVT_SEC_INFO_REQUEST. */ -typedef struct -{ - ble_gap_addr_t peer_addr; /**< Bluetooth address of the peer device. */ - ble_gap_master_id_t master_id; /**< Master Identification for LTK lookup. */ - uint8_t enc_info : 1; /**< If 1, Encryption Information required. */ - uint8_t id_info : 1; /**< If 1, Identity Information required. */ - uint8_t sign_info : 1; /**< If 1, Signing Information required. */ -} ble_gap_evt_sec_info_request_t; - - -/**@brief Event structure for @ref BLE_GAP_EVT_PASSKEY_DISPLAY. */ -typedef struct -{ - uint8_t passkey[BLE_GAP_PASSKEY_LEN]; /**< 6-digit passkey in ASCII ('0'-'9' digits only). */ - uint8_t match_request : 1; /**< If 1 requires the application to report the match using @ref sd_ble_gap_auth_key_reply - with either @ref BLE_GAP_AUTH_KEY_TYPE_NONE if there is no match or - @ref BLE_GAP_AUTH_KEY_TYPE_PASSKEY if there is a match. */ -} ble_gap_evt_passkey_display_t; - -/**@brief Event structure for @ref BLE_GAP_EVT_KEY_PRESSED. */ -typedef struct -{ - uint8_t kp_not; /**< Keypress notification type, see @ref BLE_GAP_KP_NOT_TYPES. */ -} ble_gap_evt_key_pressed_t; - - -/**@brief Event structure for @ref BLE_GAP_EVT_AUTH_KEY_REQUEST. */ -typedef struct -{ - uint8_t key_type; /**< See @ref BLE_GAP_AUTH_KEY_TYPES. */ -} ble_gap_evt_auth_key_request_t; - -/**@brief Event structure for @ref BLE_GAP_EVT_LESC_DHKEY_REQUEST. */ -typedef struct -{ - ble_gap_lesc_p256_pk_t *p_pk_peer; /**< LE Secure Connections remote P-256 Public Key. This will point to the application-supplied memory - inside the keyset during the call to @ref sd_ble_gap_sec_params_reply. */ - uint8_t oobd_req :1; /**< LESC OOB data required. A call to @ref sd_ble_gap_lesc_oob_data_set is required to complete the procedure. */ -} ble_gap_evt_lesc_dhkey_request_t; - - -/**@brief Security levels supported. - * @note See Bluetooth Specification Version 4.2 Volume 3, Part C, Chapter 10, Section 10.2.1. -*/ -typedef struct -{ - uint8_t lv1 : 1; /**< If 1: Level 1 is supported. */ - uint8_t lv2 : 1; /**< If 1: Level 2 is supported. */ - uint8_t lv3 : 1; /**< If 1: Level 3 is supported. */ - uint8_t lv4 : 1; /**< If 1: Level 4 is supported. */ -} ble_gap_sec_levels_t; - - -/**@brief Encryption Key. */ -typedef struct -{ - ble_gap_enc_info_t enc_info; /**< Encryption Information. */ - ble_gap_master_id_t master_id; /**< Master Identification. */ -} ble_gap_enc_key_t; - - -/**@brief Identity Key. */ -typedef struct -{ - ble_gap_irk_t id_info; /**< Identity Resolving Key. */ - ble_gap_addr_t id_addr_info; /**< Identity Address. */ -} ble_gap_id_key_t; - - -/**@brief Security Keys. */ -typedef struct -{ - ble_gap_enc_key_t *p_enc_key; /**< Encryption Key, or NULL. */ - ble_gap_id_key_t *p_id_key; /**< Identity Key, or NULL. */ - ble_gap_sign_info_t *p_sign_key; /**< Signing Key, or NULL. */ - ble_gap_lesc_p256_pk_t *p_pk; /**< LE Secure Connections P-256 Public Key. When in debug mode the application must use the value defined - in the Core Bluetooth Specification v4.2 Vol.3, Part H, Section 2.3.5.6.1 */ -} ble_gap_sec_keys_t; - - -/**@brief Security key set for both local and peer keys. */ -typedef struct -{ - ble_gap_sec_keys_t keys_own; /**< Keys distributed by the local device. For LE Secure Connections the encryption key will be generated locally and will always be stored if bonding. */ - ble_gap_sec_keys_t keys_peer; /**< Keys distributed by the remote device. For LE Secure Connections, p_enc_key must always be NULL. */ -} ble_gap_sec_keyset_t; - - -/**@brief Data Length Update Procedure parameters. */ -typedef struct -{ - uint16_t max_tx_octets; /**< Maximum number of payload octets that a Controller supports for transmission of a single Link Layer Data Channel PDU. */ - uint16_t max_rx_octets; /**< Maximum number of payload octets that a Controller supports for reception of a single Link Layer Data Channel PDU. */ - uint16_t max_tx_time_us; /**< Maximum time, in microseconds, that a Controller supports for transmission of a single Link Layer Data Channel PDU. */ - uint16_t max_rx_time_us; /**< Maximum time, in microseconds, that a Controller supports for reception of a single Link Layer Data Channel PDU. */ -} ble_gap_data_length_params_t; - - -/**@brief Data Length Update Procedure local limitation. */ -typedef struct -{ - uint16_t tx_payload_limited_octets; /**< If > 0, the requested TX packet length is too long by this many octets. */ - uint16_t rx_payload_limited_octets; /**< If > 0, the requested RX packet length is too long by this many octets. */ - uint16_t tx_rx_time_limited_us; /**< If > 0, the requested combination of TX and RX packet lengths is too long by this many microseconds. */ -} ble_gap_data_length_limitation_t; - - -/**@brief Event structure for @ref BLE_GAP_EVT_AUTH_STATUS. */ -typedef struct -{ - uint8_t auth_status; /**< Authentication status, see @ref BLE_GAP_SEC_STATUS. */ - uint8_t error_src : 2; /**< On error, source that caused the failure, see @ref BLE_GAP_SEC_STATUS_SOURCES. */ - uint8_t bonded : 1; /**< Procedure resulted in a bond. */ - uint8_t lesc : 1; /**< Procedure resulted in a LE Secure Connection. */ - ble_gap_sec_levels_t sm1_levels; /**< Levels supported in Security Mode 1. */ - ble_gap_sec_levels_t sm2_levels; /**< Levels supported in Security Mode 2. */ - ble_gap_sec_kdist_t kdist_own; /**< Bitmap stating which keys were exchanged (distributed) by the local device. If bonding with LE Secure Connections, the enc bit will be always set. */ - ble_gap_sec_kdist_t kdist_peer; /**< Bitmap stating which keys were exchanged (distributed) by the remote device. If bonding with LE Secure Connections, the enc bit will never be set. */ -} ble_gap_evt_auth_status_t; - - -/**@brief Event structure for @ref BLE_GAP_EVT_CONN_SEC_UPDATE. */ -typedef struct -{ - ble_gap_conn_sec_t conn_sec; /**< Connection security level. */ -} ble_gap_evt_conn_sec_update_t; - - -/**@brief Event structure for @ref BLE_GAP_EVT_TIMEOUT. */ -typedef struct -{ - uint8_t src; /**< Source of timeout event, see @ref BLE_GAP_TIMEOUT_SOURCES. */ - union - { - ble_data_t adv_report_buffer; /**< If source is set to @ref BLE_GAP_TIMEOUT_SRC_SCAN, the released - scan buffer is contained in this field. */ - } params; /**< Event Parameters. */ -} ble_gap_evt_timeout_t; - - -/**@brief Event structure for @ref BLE_GAP_EVT_RSSI_CHANGED. */ -typedef struct -{ - int8_t rssi; /**< Received Signal Strength Indication in dBm. - @note ERRATA-153 requires the rssi sample to be compensated based on a temperature measurement. */ - uint8_t ch_index; /**< Data Channel Index on which the Signal Strength is measured (0-36). */ -} ble_gap_evt_rssi_changed_t; - -/**@brief Event structure for @ref BLE_GAP_EVT_ADV_SET_TERMINATED */ -typedef struct -{ - uint8_t reason; /**< Reason for why the advertising set terminated. See - @ref BLE_GAP_EVT_ADV_SET_TERMINATED_REASON. */ - uint8_t adv_handle; /**< Advertising handle in which advertising has ended. */ - uint8_t num_completed_adv_events; /**< If @ref ble_gap_adv_params_t::max_adv_evts was not set to 0, - this field indicates the number of completed advertising events. */ - ble_gap_adv_data_t adv_data; /**< Advertising buffers corresponding to the terminated - advertising set. The advertising buffers provided in - @ref sd_ble_gap_adv_set_configure are now released. */ -} ble_gap_evt_adv_set_terminated_t; - -/**@brief Event structure for @ref BLE_GAP_EVT_ADV_REPORT. - * - * @note If @ref ble_gap_adv_report_type_t::status is set to @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA, - * not all fields in the advertising report may be available. - * - * @note When ble_gap_adv_report_type_t::status is not set to @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA, - * scanning will be paused. To continue scanning, call @ref sd_ble_gap_scan_start. - */ -typedef struct -{ - ble_gap_adv_report_type_t type; /**< Advertising report type. See @ref ble_gap_adv_report_type_t. */ - ble_gap_addr_t peer_addr; /**< Bluetooth address of the peer device. If the peer_addr is resolved: - @ref ble_gap_addr_t::addr_id_peer is set to 1 and the address is the - peer's identity address. */ - ble_gap_addr_t direct_addr; /**< Contains the target address of the advertising event if - @ref ble_gap_adv_report_type_t::directed is set to 1. If the - SoftDevice was able to resolve the address, - @ref ble_gap_addr_t::addr_id_peer is set to 1 and the direct_addr - contains the local identity address. If the target address of the - advertising event is @ref BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE, - and the SoftDevice was unable to resolve it, the application may try - to resolve this address to find out if the advertising event was - directed to us. */ - uint8_t primary_phy; /**< Indicates the PHY on which the primary advertising packet was received. - See @ref BLE_GAP_PHYS. */ - uint8_t secondary_phy; /**< Indicates the PHY on which the secondary advertising packet was received. - See @ref BLE_GAP_PHYS. This field is set to @ref BLE_GAP_PHY_NOT_SET if no packets - were received on a secondary advertising channel. */ - int8_t tx_power; /**< TX Power reported by the advertiser in the last packet header received. - This field is set to @ref BLE_GAP_POWER_LEVEL_INVALID if the - last received packet did not contain the Tx Power field. - @note TX Power is only included in extended advertising packets. */ - int8_t rssi; /**< Received Signal Strength Indication in dBm of the last packet received. - @note ERRATA-153 requires the rssi sample to be compensated based on a temperature measurement. */ - uint8_t ch_index; /**< Channel Index on which the last advertising packet is received (0-39). */ - uint8_t set_id; /**< Set ID of the received advertising data. Set ID is not present - if set to @ref BLE_GAP_ADV_REPORT_SET_ID_NOT_AVAILABLE. */ - uint16_t data_id:12; /**< The advertising data ID of the received advertising data. Data ID - is not present if @ref ble_gap_evt_adv_report_t::set_id is set to - @ref BLE_GAP_ADV_REPORT_SET_ID_NOT_AVAILABLE. */ - ble_data_t data; /**< Received advertising or scan response data. If - @ref ble_gap_adv_report_type_t::status is not set to - @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA, the data buffer provided - in @ref sd_ble_gap_scan_start is now released. */ - ble_gap_aux_pointer_t aux_pointer; /**< The offset and PHY of the next advertising packet in this extended advertising - event. @note This field is only set if @ref ble_gap_adv_report_type_t::status - is set to @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA. */ -} ble_gap_evt_adv_report_t; - - -/**@brief Event structure for @ref BLE_GAP_EVT_SEC_REQUEST. */ -typedef struct -{ - uint8_t bond : 1; /**< Perform bonding. */ - uint8_t mitm : 1; /**< Man In The Middle protection requested. */ - uint8_t lesc : 1; /**< LE Secure Connections requested. */ - uint8_t keypress : 1; /**< Generation of keypress notifications requested. */ -} ble_gap_evt_sec_request_t; - - -/**@brief Event structure for @ref BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST. */ -typedef struct -{ - ble_gap_conn_params_t conn_params; /**< GAP Connection Parameters. */ -} ble_gap_evt_conn_param_update_request_t; - - -/**@brief Event structure for @ref BLE_GAP_EVT_SCAN_REQ_REPORT. */ -typedef struct -{ - uint8_t adv_handle; /**< Advertising handle for the advertising set which received the Scan Request */ - int8_t rssi; /**< Received Signal Strength Indication in dBm. - @note ERRATA-153 requires the rssi sample to be compensated based on a temperature measurement. */ - ble_gap_addr_t peer_addr; /**< Bluetooth address of the peer device. If the peer_addr resolved: @ref ble_gap_addr_t::addr_id_peer is set to 1 - and the address is the device's identity address. */ -} ble_gap_evt_scan_req_report_t; - - -/**@brief Event structure for @ref BLE_GAP_EVT_DATA_LENGTH_UPDATE_REQUEST. */ -typedef struct -{ - ble_gap_data_length_params_t peer_params; /**< Peer data length parameters. */ -} ble_gap_evt_data_length_update_request_t; - -/**@brief Event structure for @ref BLE_GAP_EVT_DATA_LENGTH_UPDATE. */ -typedef struct -{ - ble_gap_data_length_params_t effective_params; /**< The effective data length parameters. */ -} ble_gap_evt_data_length_update_t; - - -/**@brief Event structure for @ref BLE_GAP_EVT_QOS_CHANNEL_SURVEY_REPORT. */ -typedef struct -{ - int8_t channel_energy[BLE_GAP_CHANNEL_COUNT]; /**< The measured energy on the Bluetooth Low Energy - channels, in dBm, indexed by Channel Index. - If no measurement is available for the given channel, channel_energy is set to - @ref BLE_GAP_POWER_LEVEL_INVALID. */ -} ble_gap_evt_qos_channel_survey_report_t; - -/**@brief GAP event structure. */ -typedef struct -{ - uint16_t conn_handle; /**< Connection Handle on which event occurred. */ - union /**< union alternative identified by evt_id in enclosing struct. */ - { - ble_gap_evt_connected_t connected; /**< Connected Event Parameters. */ - ble_gap_evt_disconnected_t disconnected; /**< Disconnected Event Parameters. */ - ble_gap_evt_conn_param_update_t conn_param_update; /**< Connection Parameter Update Parameters. */ - ble_gap_evt_sec_params_request_t sec_params_request; /**< Security Parameters Request Event Parameters. */ - ble_gap_evt_sec_info_request_t sec_info_request; /**< Security Information Request Event Parameters. */ - ble_gap_evt_passkey_display_t passkey_display; /**< Passkey Display Event Parameters. */ - ble_gap_evt_key_pressed_t key_pressed; /**< Key Pressed Event Parameters. */ - ble_gap_evt_auth_key_request_t auth_key_request; /**< Authentication Key Request Event Parameters. */ - ble_gap_evt_lesc_dhkey_request_t lesc_dhkey_request; /**< LE Secure Connections DHKey calculation request. */ - ble_gap_evt_auth_status_t auth_status; /**< Authentication Status Event Parameters. */ - ble_gap_evt_conn_sec_update_t conn_sec_update; /**< Connection Security Update Event Parameters. */ - ble_gap_evt_timeout_t timeout; /**< Timeout Event Parameters. */ - ble_gap_evt_rssi_changed_t rssi_changed; /**< RSSI Event Parameters. */ - ble_gap_evt_adv_report_t adv_report; /**< Advertising Report Event Parameters. */ - ble_gap_evt_adv_set_terminated_t adv_set_terminated; /**< Advertising Set Terminated Event Parameters. */ - ble_gap_evt_sec_request_t sec_request; /**< Security Request Event Parameters. */ - ble_gap_evt_conn_param_update_request_t conn_param_update_request; /**< Connection Parameter Update Parameters. */ - ble_gap_evt_scan_req_report_t scan_req_report; /**< Scan Request Report Parameters. */ - ble_gap_evt_phy_update_request_t phy_update_request; /**< PHY Update Request Event Parameters. */ - ble_gap_evt_phy_update_t phy_update; /**< PHY Update Parameters. */ - ble_gap_evt_data_length_update_request_t data_length_update_request; /**< Data Length Update Request Event Parameters. */ - ble_gap_evt_data_length_update_t data_length_update; /**< Data Length Update Event Parameters. */ - ble_gap_evt_qos_channel_survey_report_t qos_channel_survey_report; /**< Quality of Service (QoS) Channel Survey Report Parameters. */ - } params; /**< Event Parameters. */ -} ble_gap_evt_t; - - -/** - * @brief BLE GAP connection configuration parameters, set with @ref sd_ble_cfg_set. - * - * @retval ::NRF_ERROR_CONN_COUNT The connection count for the connection configurations is zero. - * @retval ::NRF_ERROR_INVALID_PARAM One or more of the following is true: - * - The sum of conn_count for all connection configurations combined exceeds UINT8_MAX. - * - The event length is smaller than @ref BLE_GAP_EVENT_LENGTH_MIN. - */ -typedef struct -{ - uint8_t conn_count; /**< The number of concurrent connections the application can create with this configuration. - The default and minimum value is @ref BLE_GAP_CONN_COUNT_DEFAULT. */ - uint16_t event_length; /**< The time set aside for this connection on every connection interval in 1.25 ms units. - The default value is @ref BLE_GAP_EVENT_LENGTH_DEFAULT, the minimum value is @ref BLE_GAP_EVENT_LENGTH_MIN. - The event length and the connection interval are the primary parameters - for setting the throughput of a connection. - See the SoftDevice Specification for details on throughput. */ -} ble_gap_conn_cfg_t; - - -/** - * @brief Configuration of maximum concurrent connections in the different connected roles, set with - * @ref sd_ble_cfg_set. - * - * @retval ::NRF_ERROR_CONN_COUNT The sum of periph_role_count and central_role_count is too - * large. The maximum supported sum of concurrent connections is - * @ref BLE_GAP_ROLE_COUNT_COMBINED_MAX. - * @retval ::NRF_ERROR_INVALID_PARAM central_sec_count is larger than central_role_count. - * @retval ::NRF_ERROR_RESOURCES The adv_set_count is too large. The maximum - * supported advertising handles is - * @ref BLE_GAP_ADV_SET_COUNT_MAX. - */ -typedef struct -{ - uint8_t adv_set_count; /**< Maximum number of advertising sets. Default value is @ref BLE_GAP_ADV_SET_COUNT_DEFAULT. */ - uint8_t periph_role_count; /**< Maximum number of connections concurrently acting as a peripheral. Default value is @ref BLE_GAP_ROLE_COUNT_PERIPH_DEFAULT. */ - uint8_t central_role_count; /**< Maximum number of connections concurrently acting as a central. Default value is @ref BLE_GAP_ROLE_COUNT_CENTRAL_DEFAULT. */ - uint8_t central_sec_count; /**< Number of SMP instances shared between all connections acting as a central. Default value is @ref BLE_GAP_ROLE_COUNT_CENTRAL_SEC_DEFAULT. */ - uint8_t qos_channel_survey_role_available:1; /**< If set, the Quality of Service (QoS) channel survey module is available to the - application using @ref sd_ble_gap_qos_channel_survey_start. */ -} ble_gap_cfg_role_count_t; - - -/** - * @brief Device name and its properties, set with @ref sd_ble_cfg_set. - * - * @note If the device name is not configured, the default device name will be - * @ref BLE_GAP_DEVNAME_DEFAULT, the maximum device name length will be - * @ref BLE_GAP_DEVNAME_DEFAULT_LEN, vloc will be set to @ref BLE_GATTS_VLOC_STACK and the device name - * will have no write access. - * - * @note If @ref max_len is more than @ref BLE_GAP_DEVNAME_DEFAULT_LEN and vloc is set to @ref BLE_GATTS_VLOC_STACK, - * the attribute table size must be increased to have room for the longer device name (see - * @ref sd_ble_cfg_set and @ref ble_gatts_cfg_attr_tab_size_t). - * - * @note If vloc is @ref BLE_GATTS_VLOC_STACK : - * - p_value must point to non-volatile memory (flash) or be NULL. - * - If p_value is NULL, the device name will initially be empty. - * - * @note If vloc is @ref BLE_GATTS_VLOC_USER : - * - p_value cannot be NULL. - * - If the device name is writable, p_value must point to volatile memory (RAM). - * - * @retval ::NRF_ERROR_INVALID_PARAM One or more of the following is true: - * - Invalid device name location (vloc). - * - Invalid device name security mode. - * @retval ::NRF_ERROR_INVALID_LENGTH One or more of the following is true: - * - The device name length is invalid (must be between 0 and @ref BLE_GAP_DEVNAME_MAX_LEN). - * - The device name length is too long for the given Attribute Table. - * @retval ::NRF_ERROR_NOT_SUPPORTED Device name security mode is not supported. - */ -typedef struct -{ - ble_gap_conn_sec_mode_t write_perm; /**< Write permissions. */ - uint8_t vloc:2; /**< Value location, see @ref BLE_GATTS_VLOCS.*/ - uint8_t *p_value; /**< Pointer to where the value (device name) is stored or will be stored. */ - uint16_t current_len; /**< Current length in bytes of the memory pointed to by p_value.*/ - uint16_t max_len; /**< Maximum length in bytes of the memory pointed to by p_value.*/ -} ble_gap_cfg_device_name_t; - - -/**@brief Configuration structure for GAP configurations. */ -typedef union -{ - ble_gap_cfg_role_count_t role_count_cfg; /**< Role count configuration, cfg_id is @ref BLE_GAP_CFG_ROLE_COUNT. */ - ble_gap_cfg_device_name_t device_name_cfg; /**< Device name configuration, cfg_id is @ref BLE_GAP_CFG_DEVICE_NAME. */ -} ble_gap_cfg_t; - - -/**@brief Channel Map option. - * - * @details Used with @ref sd_ble_opt_get to get the current channel map - * or @ref sd_ble_opt_set to set a new channel map. When setting the - * channel map, it applies to all current and future connections. When getting the - * current channel map, it applies to a single connection and the connection handle - * must be supplied. - * - * @note Setting the channel map may take some time, depending on connection parameters. - * The time taken may be different for each connection and the get operation will - * return the previous channel map until the new one has taken effect. - * - * @note After setting the channel map, by spec it can not be set again until at least 1 s has passed. - * See Bluetooth Specification Version 4.1 Volume 2, Part E, Section 7.3.46. - * - * @retval ::NRF_SUCCESS Get or set successful. - * @retval ::NRF_ERROR_INVALID_PARAM One or more of the following is true: - * - Less then two bits in @ref ch_map are set. - * - Bits for primary advertising channels (37-39) are set. - * @retval ::NRF_ERROR_BUSY Channel map was set again before enough time had passed. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied for get. - * - */ -typedef struct -{ - uint16_t conn_handle; /**< Connection Handle (only applicable for get) */ - uint8_t ch_map[5]; /**< Channel Map (37-bit). */ -} ble_gap_opt_ch_map_t; - - -/**@brief Local connection latency option. - * - * @details Local connection latency is a feature which enables the slave to improve - * current consumption by ignoring the slave latency set by the peer. The - * local connection latency can only be set to a multiple of the slave latency, - * and cannot be longer than half of the supervision timeout. - * - * @details Used with @ref sd_ble_opt_set to set the local connection latency. The - * @ref sd_ble_opt_get is not supported for this option, but the actual - * local connection latency (unless set to NULL) is set as a return parameter - * when setting the option. - * - * @note The latency set will be truncated down to the closest slave latency event - * multiple, or the nearest multiple before half of the supervision timeout. - * - * @note The local connection latency is disabled by default, and needs to be enabled for new - * connections and whenever the connection is updated. - * - * @retval ::NRF_SUCCESS Set successfully. - * @retval ::NRF_ERROR_NOT_SUPPORTED Get is not supported. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle parameter. - */ -typedef struct -{ - uint16_t conn_handle; /**< Connection Handle */ - uint16_t requested_latency; /**< Requested local connection latency. */ - uint16_t * p_actual_latency; /**< Pointer to storage for the actual local connection latency (can be set to NULL to skip return value). */ -} ble_gap_opt_local_conn_latency_t; - -/**@brief Disable slave latency - * - * @details Used with @ref sd_ble_opt_set to temporarily disable slave latency of a peripheral connection - * (see @ref ble_gap_conn_params_t::slave_latency). And to re-enable it again. When disabled, the - * peripheral will ignore the slave_latency set by the central. - * - * @note Shall only be called on peripheral links. - * - * @retval ::NRF_SUCCESS Set successfully. - * @retval ::NRF_ERROR_NOT_SUPPORTED Get is not supported. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle parameter. - */ -typedef struct -{ - uint16_t conn_handle; /**< Connection Handle */ - uint8_t disable : 1; /**< Set to 1 to disable slave latency. Set to 0 enable it again.*/ -} ble_gap_opt_slave_latency_disable_t; - -/**@brief Passkey Option. - * - * @details Structure containing the passkey to be used during pairing. This can be used with @ref - * sd_ble_opt_set to make the SoftDevice use a preprogrammed passkey for authentication - * instead of generating a random one. - * - * @note Repeated pairing attempts using the same preprogrammed passkey makes pairing vulnerable to MITM attacks. - * - * @note @ref sd_ble_opt_get is not supported for this option. - * - */ -typedef struct -{ - uint8_t const * p_passkey; /**< Pointer to 6-digit ASCII string (digit 0..9 only, no NULL termination) passkey to be used during pairing. If this is NULL, the SoftDevice will generate a random passkey if required.*/ -} ble_gap_opt_passkey_t; - - -/**@brief Compatibility mode 1 option. - * - * @details This can be used with @ref sd_ble_opt_set to enable and disable - * compatibility mode 1. Compatibility mode 1 is disabled by default. - * - * @note Compatibility mode 1 enables interoperability with devices that do not support a value of - * 0 for the WinOffset parameter in the Link Layer CONNECT_IND packet. This applies to a - * limited set of legacy peripheral devices from another vendor. Enabling this compatibility - * mode will only have an effect if the local device will act as a central device and - * initiate a connection to a peripheral device. In that case it may lead to the connection - * creation taking up to one connection interval longer to complete for all connections. - * - * @retval ::NRF_SUCCESS Set successfully. - * @retval ::NRF_ERROR_INVALID_STATE When connection creation is ongoing while mode 1 is set. - */ -typedef struct -{ - uint8_t enable : 1; /**< Enable compatibility mode 1.*/ -} ble_gap_opt_compat_mode_1_t; - - -/**@brief Authenticated payload timeout option. - * - * @details This can be used with @ref sd_ble_opt_set to change the Authenticated payload timeout to a value other - * than the default of @ref BLE_GAP_AUTH_PAYLOAD_TIMEOUT_MAX. - * - * @note The authenticated payload timeout event ::BLE_GAP_TIMEOUT_SRC_AUTH_PAYLOAD will be generated - * if auth_payload_timeout time has elapsed without receiving a packet with a valid MIC on an encrypted - * link. - * - * @note The LE ping procedure will be initiated before the timer expires to give the peer a chance - * to reset the timer. In addition the stack will try to prioritize running of LE ping over other - * activities to increase chances of finishing LE ping before timer expires. To avoid side-effects - * on other activities, it is recommended to use high timeout values. - * Recommended timeout > 2*(connInterval * (6 + connSlaveLatency)). - * - * @retval ::NRF_SUCCESS Set successfully. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. auth_payload_timeout was outside of allowed range. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle parameter. - */ -typedef struct -{ - uint16_t conn_handle; /**< Connection Handle */ - uint16_t auth_payload_timeout; /**< Requested timeout in 10 ms unit, see @ref BLE_GAP_AUTH_PAYLOAD_TIMEOUT. */ -} ble_gap_opt_auth_payload_timeout_t; - -/**@brief Option structure for GAP options. */ -typedef union -{ - ble_gap_opt_ch_map_t ch_map; /**< Parameters for the Channel Map option. */ - ble_gap_opt_local_conn_latency_t local_conn_latency; /**< Parameters for the Local connection latency option */ - ble_gap_opt_passkey_t passkey; /**< Parameters for the Passkey option.*/ - ble_gap_opt_compat_mode_1_t compat_mode_1; /**< Parameters for the compatibility mode 1 option.*/ - ble_gap_opt_auth_payload_timeout_t auth_payload_timeout; /**< Parameters for the authenticated payload timeout option.*/ - ble_gap_opt_slave_latency_disable_t slave_latency_disable; /**< Parameters for the Disable slave latency option */ -} ble_gap_opt_t; -/**@} */ - - -/**@addtogroup BLE_GAP_FUNCTIONS Functions - * @{ */ - -/**@brief Set the local Bluetooth identity address. - * - * The local Bluetooth identity address is the address that identifies this device to other peers. - * The address type must be either @ref BLE_GAP_ADDR_TYPE_PUBLIC or @ref BLE_GAP_ADDR_TYPE_RANDOM_STATIC. - * - * @note The identity address cannot be changed while advertising, scanning or creating a connection. - * - * @note This address will be distributed to the peer during bonding. - * If the address changes, the address stored in the peer device will not be valid and the ability to - * reconnect using the old address will be lost. - * - * @note By default the SoftDevice will set an address of type @ref BLE_GAP_ADDR_TYPE_RANDOM_STATIC upon being - * enabled. The address is a random number populated during the IC manufacturing process and remains unchanged - * for the lifetime of each IC. - * - * @mscs - * @mmsc{@ref BLE_GAP_ADV_MSC} - * @endmscs - * - * @param[in] p_addr Pointer to address structure. - * - * @retval ::NRF_SUCCESS Address successfully set. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid address. - * @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry. - * @retval ::NRF_ERROR_INVALID_STATE The identity address cannot be changed while advertising, - * scanning or creating a connection. - */ -SVCALL(SD_BLE_GAP_ADDR_SET, uint32_t, sd_ble_gap_addr_set(ble_gap_addr_t const *p_addr)); - - -/**@brief Get local Bluetooth identity address. - * - * @note This will always return the identity address irrespective of the privacy settings, - * i.e. the address type will always be either @ref BLE_GAP_ADDR_TYPE_PUBLIC or @ref BLE_GAP_ADDR_TYPE_RANDOM_STATIC. - * - * @param[out] p_addr Pointer to address structure to be filled in. - * - * @retval ::NRF_SUCCESS Address successfully retrieved. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid or NULL pointer supplied. - */ -SVCALL(SD_BLE_GAP_ADDR_GET, uint32_t, sd_ble_gap_addr_get(ble_gap_addr_t *p_addr)); - - -/**@brief Get the Bluetooth device address used by the advertiser. - * - * @note This function will return the local Bluetooth address used in advertising PDUs. When - * using privacy, the SoftDevice will generate a new private address every - * @ref ble_gap_privacy_params_t::private_addr_cycle_s configured using - * @ref sd_ble_gap_privacy_set. Hence depending on when the application calls this API, the - * address returned may not be the latest address that is used in the advertising PDUs. - * - * @param[in] adv_handle The advertising handle to get the address from. - * @param[out] p_addr Pointer to address structure to be filled in. - * - * @retval ::NRF_SUCCESS Address successfully retrieved. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid or NULL pointer supplied. - * @retval ::BLE_ERROR_INVALID_ADV_HANDLE The provided advertising handle was not found. - * @retval ::NRF_ERROR_INVALID_STATE The advertising set is currently not advertising. - */ -SVCALL(SD_BLE_GAP_ADV_ADDR_GET, uint32_t, sd_ble_gap_adv_addr_get(uint8_t adv_handle, ble_gap_addr_t *p_addr)); - - -/**@brief Set the active whitelist in the SoftDevice. - * - * @note Only one whitelist can be used at a time and the whitelist is shared between the BLE roles. - * The whitelist cannot be set if a BLE role is using the whitelist. - * - * @note If an address is resolved using the information in the device identity list, then the whitelist - * filter policy applies to the peer identity address and not the resolvable address sent on air. - * - * @mscs - * @mmsc{@ref BLE_GAP_WL_SHARE_MSC} - * @mmsc{@ref BLE_GAP_PRIVACY_SCAN_PRIVATE_SCAN_MSC} - * @endmscs - * - * @param[in] pp_wl_addrs Pointer to a whitelist of peer addresses, if NULL the whitelist will be cleared. - * @param[in] len Length of the whitelist, maximum @ref BLE_GAP_WHITELIST_ADDR_MAX_COUNT. - * - * @retval ::NRF_SUCCESS The whitelist is successfully set/cleared. - * @retval ::NRF_ERROR_INVALID_ADDR The whitelist (or one of its entries) provided is invalid. - * @retval ::BLE_ERROR_GAP_WHITELIST_IN_USE The whitelist is in use by a BLE role and cannot be set or cleared. - * @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid address type is supplied. - * @retval ::NRF_ERROR_DATA_SIZE The given whitelist size is invalid (zero or too large); this can only return when - * pp_wl_addrs is not NULL. - */ -SVCALL(SD_BLE_GAP_WHITELIST_SET, uint32_t, sd_ble_gap_whitelist_set(ble_gap_addr_t const * const * pp_wl_addrs, uint8_t len)); - - -/**@brief Set device identity list. - * - * @note Only one device identity list can be used at a time and the list is shared between the BLE roles. - * The device identity list cannot be set if a BLE role is using the list. - * - * @param[in] pp_id_keys Pointer to an array of peer identity addresses and peer IRKs, if NULL the device identity list will be cleared. - * @param[in] pp_local_irks Pointer to an array of local IRKs. Each entry in the array maps to the entry in pp_id_keys at the same index. - * To fill in the list with the currently set device IRK for all peers, set to NULL. - * @param[in] len Length of the device identity list, maximum @ref BLE_GAP_DEVICE_IDENTITIES_MAX_COUNT. - * - * @mscs - * @mmsc{@ref BLE_GAP_PRIVACY_ADV_MSC} - * @mmsc{@ref BLE_GAP_PRIVACY_SCAN_MSC} - * @mmsc{@ref BLE_GAP_PRIVACY_SCAN_PRIVATE_SCAN_MSC} - * @mmsc{@ref BLE_GAP_PRIVACY_ADV_DIR_PRIV_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_CONN_PRIV_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_CONN_PRIV_MSC} - * @endmscs - * - * @retval ::NRF_SUCCESS The device identity list successfully set/cleared. - * @retval ::NRF_ERROR_INVALID_ADDR The device identity list (or one of its entries) provided is invalid. - * This code may be returned if the local IRK list also has an invalid entry. - * @retval ::BLE_ERROR_GAP_DEVICE_IDENTITIES_IN_USE The device identity list is in use and cannot be set or cleared. - * @retval ::BLE_ERROR_GAP_DEVICE_IDENTITIES_DUPLICATE The device identity list contains multiple entries with the same identity address. - * @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid address type is supplied. - * @retval ::NRF_ERROR_DATA_SIZE The given device identity list size invalid (zero or too large); this can - * only return when pp_id_keys is not NULL. - */ -SVCALL(SD_BLE_GAP_DEVICE_IDENTITIES_SET, uint32_t, sd_ble_gap_device_identities_set(ble_gap_id_key_t const * const * pp_id_keys, ble_gap_irk_t const * const * pp_local_irks, uint8_t len)); - - -/**@brief Set privacy settings. - * - * @note Privacy settings cannot be changed while advertising, scanning or creating a connection. - * - * @param[in] p_privacy_params Privacy settings. - * - * @mscs - * @mmsc{@ref BLE_GAP_PRIVACY_ADV_MSC} - * @mmsc{@ref BLE_GAP_PRIVACY_SCAN_MSC} - * @mmsc{@ref BLE_GAP_PRIVACY_ADV_DIR_PRIV_MSC} - * @endmscs - * - * @retval ::NRF_SUCCESS Set successfully. - * @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry. - * @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid address type is supplied. - * @retval ::NRF_ERROR_INVALID_ADDR The pointer to privacy settings is NULL or invalid. - * Otherwise, the p_device_irk pointer in privacy parameter is an invalid pointer. - * @retval ::NRF_ERROR_INVALID_PARAM Out of range parameters are provided. - * @retval ::NRF_ERROR_INVALID_STATE Privacy settings cannot be changed while advertising, scanning - * or creating a connection. - */ -SVCALL(SD_BLE_GAP_PRIVACY_SET, uint32_t, sd_ble_gap_privacy_set(ble_gap_privacy_params_t const *p_privacy_params)); - - -/**@brief Get privacy settings. - * - * @note ::ble_gap_privacy_params_t::p_device_irk must be initialized to NULL or a valid address before this function is called. - * If it is initialized to a valid address, the address pointed to will contain the current device IRK on return. - * - * @param[in,out] p_privacy_params Privacy settings. - * - * @retval ::NRF_SUCCESS Privacy settings read. - * @retval ::NRF_ERROR_INVALID_ADDR The pointer given for returning the privacy settings may be NULL or invalid. - * Otherwise, the p_device_irk pointer in privacy parameter is an invalid pointer. - */ -SVCALL(SD_BLE_GAP_PRIVACY_GET, uint32_t, sd_ble_gap_privacy_get(ble_gap_privacy_params_t *p_privacy_params)); - - -/**@brief Configure an advertising set. Set, clear or update advertising and scan response data. - * - * @note The format of the advertising data will be checked by this call to ensure interoperability. - * Limitations imposed by this API call to the data provided include having a flags data type in the scan response data and - * duplicating the local name in the advertising data and scan response data. - * - * @note In order to update advertising data while advertising, new advertising buffers must be provided. - * - * @mscs - * @mmsc{@ref BLE_GAP_ADV_MSC} - * @mmsc{@ref BLE_GAP_WL_SHARE_MSC} - * @endmscs - * - * @param[in,out] p_adv_handle Provide a pointer to a handle containing @ref BLE_GAP_ADV_SET_HANDLE_NOT_SET to configure - * a new advertising set. On success, a new handle is then returned through the pointer. - * Provide a pointer to an existing advertising handle to configure an existing advertising set. - * @param[in] p_adv_data Advertising data. If set to NULL, no advertising data will be used. See @ref ble_gap_adv_data_t. - * @param[in] p_adv_params Advertising parameters. When this function is used to update advertising data while advertising, - * this parameter must be NULL. See @ref ble_gap_adv_params_t. - * - * @retval ::NRF_SUCCESS Advertising set successfully configured. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied: - * - Invalid advertising data configuration specified. See @ref ble_gap_adv_data_t. - * - Invalid configuration of p_adv_params. See @ref ble_gap_adv_params_t. - * - Use of whitelist requested but whitelist has not been set, - * see @ref sd_ble_gap_whitelist_set. - * @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR ble_gap_adv_params_t::p_peer_addr is invalid. - * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either: - * - It is invalid to provide non-NULL advertising set parameters while advertising. - * - It is invalid to provide the same data buffers while advertising. To update - * advertising data, provide new advertising buffers. - * @retval ::BLE_ERROR_GAP_DISCOVERABLE_WITH_WHITELIST Discoverable mode and whitelist incompatible. - * @retval ::BLE_ERROR_INVALID_ADV_HANDLE The provided advertising handle was not found. Use @ref BLE_GAP_ADV_SET_HANDLE_NOT_SET to - * configure a new advertising handle. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_FLAGS Invalid combination of advertising flags supplied. - * @retval ::NRF_ERROR_INVALID_DATA Invalid data type(s) supplied. Check the advertising data format specification - * given in Bluetooth Specification Version 5.0, Volume 3, Part C, Chapter 11. - * @retval ::NRF_ERROR_INVALID_LENGTH Invalid data length(s) supplied. - * @retval ::NRF_ERROR_NOT_SUPPORTED Unsupported data length or advertising parameter configuration. - * @retval ::NRF_ERROR_NO_MEM Not enough memory to configure a new advertising handle. Update an - * existing advertising handle instead. - * @retval ::BLE_ERROR_GAP_UUID_LIST_MISMATCH Invalid UUID list supplied. - */ -SVCALL(SD_BLE_GAP_ADV_SET_CONFIGURE, uint32_t, sd_ble_gap_adv_set_configure(uint8_t *p_adv_handle, ble_gap_adv_data_t const *p_adv_data, ble_gap_adv_params_t const *p_adv_params)); - - -/**@brief Start advertising (GAP Discoverable, Connectable modes, Broadcast Procedure). - * - * @note Only one advertiser may be active at any time. - * - * @events - * @event{@ref BLE_GAP_EVT_CONNECTED, Generated after connection has been established through connectable advertising.} - * @event{@ref BLE_GAP_EVT_ADV_SET_TERMINATED, Advertising set has terminated.} - * @event{@ref BLE_GAP_EVT_SCAN_REQ_REPORT, A scan request was received.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GAP_ADV_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_CONN_PRIV_MSC} - * @mmsc{@ref BLE_GAP_PRIVACY_ADV_DIR_PRIV_MSC} - * @mmsc{@ref BLE_GAP_WL_SHARE_MSC} - * @endmscs - * - * @param[in] adv_handle Advertising handle to advertise on, received from @ref sd_ble_gap_adv_set_configure. - * @param[in] conn_cfg_tag Tag identifying a configuration set by @ref sd_ble_cfg_set or - * @ref BLE_CONN_CFG_TAG_DEFAULT to use the default connection configuration. For non-connectable - * advertising, this is ignored. - * - * @retval ::NRF_SUCCESS The BLE stack has started advertising. - * @retval ::NRF_ERROR_INVALID_STATE adv_handle is not configured or already advertising. - * @retval ::NRF_ERROR_CONN_COUNT The limit of available connections has been reached; connectable advertiser cannot be started. - * @retval ::BLE_ERROR_INVALID_ADV_HANDLE Advertising handle not found. Configure a new adveriting handle with @ref sd_ble_gap_adv_set_configure. - * @retval ::NRF_ERROR_NOT_FOUND conn_cfg_tag not found. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied: - * - Invalid configuration of p_adv_params. See @ref ble_gap_adv_params_t. - * - Use of whitelist requested but whitelist has not been set, see @ref sd_ble_gap_whitelist_set. - * @retval ::NRF_ERROR_RESOURCES Either: - * - adv_handle is configured with connectable advertising, but the event_length parameter - * associated with conn_cfg_tag is too small to be able to establish a connection on - * the selected advertising phys. Use @ref sd_ble_cfg_set to increase the event length. - * - Not enough BLE role slots available. - Stop one or more currently active roles (Central, Peripheral, Broadcaster or Observer) and try again. - * - p_adv_params is configured with connectable advertising, but the event_length parameter - * associated with conn_cfg_tag is too small to be able to establish a connection on - * the selected advertising phys. Use @ref sd_ble_cfg_set to increase the event length. - */ -SVCALL(SD_BLE_GAP_ADV_START, uint32_t, sd_ble_gap_adv_start(uint8_t adv_handle, uint8_t conn_cfg_tag)); - - -/**@brief Stop advertising (GAP Discoverable, Connectable modes, Broadcast Procedure). - * - * @mscs - * @mmsc{@ref BLE_GAP_ADV_MSC} - * @mmsc{@ref BLE_GAP_WL_SHARE_MSC} - * @endmscs - * - * @param[in] adv_handle The advertising handle that should stop advertising. - * - * @retval ::NRF_SUCCESS The BLE stack has stopped advertising. - * @retval ::BLE_ERROR_INVALID_ADV_HANDLE Invalid advertising handle. - * @retval ::NRF_ERROR_INVALID_STATE The advertising handle is not advertising. - */ -SVCALL(SD_BLE_GAP_ADV_STOP, uint32_t, sd_ble_gap_adv_stop(uint8_t adv_handle)); - - - -/**@brief Update connection parameters. - * - * @details In the central role this will initiate a Link Layer connection parameter update procedure, - * otherwise in the peripheral role, this will send the corresponding L2CAP request and wait for - * the central to perform the procedure. In both cases, and regardless of success or failure, the application - * will be informed of the result with a @ref BLE_GAP_EVT_CONN_PARAM_UPDATE event. - * - * @details This function can be used as a central both to reply to a @ref BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST or to start the procedure unrequested. - * - * @events - * @event{@ref BLE_GAP_EVT_CONN_PARAM_UPDATE, Result of the connection parameter update procedure.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GAP_CPU_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_ENC_AUTH_MUTEX_MSC} - * @mmsc{@ref BLE_GAP_MULTILINK_CPU_MSC} - * @mmsc{@ref BLE_GAP_MULTILINK_CTRL_PROC_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_CPU_MSC} - * @endmscs - * - * @param[in] conn_handle Connection handle. - * @param[in] p_conn_params Pointer to desired connection parameters. If NULL is provided on a peripheral role, - * the parameters in the PPCP characteristic of the GAP service will be used instead. - * If NULL is provided on a central role and in response to a @ref BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST, the peripheral request will be rejected - * - * @retval ::NRF_SUCCESS The Connection Update procedure has been started successfully. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints. - * @retval ::NRF_ERROR_INVALID_STATE Disconnection in progress or link has not been established. - * @retval ::NRF_ERROR_BUSY Procedure already in progress, wait for pending procedures to complete and retry. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. - * @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation. - */ -SVCALL(SD_BLE_GAP_CONN_PARAM_UPDATE, uint32_t, sd_ble_gap_conn_param_update(uint16_t conn_handle, ble_gap_conn_params_t const *p_conn_params)); - - -/**@brief Disconnect (GAP Link Termination). - * - * @details This call initiates the disconnection procedure, and its completion will be communicated to the application - * with a @ref BLE_GAP_EVT_DISCONNECTED event. - * - * @events - * @event{@ref BLE_GAP_EVT_DISCONNECTED, Generated when disconnection procedure is complete.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GAP_CONN_MSC} - * @endmscs - * - * @param[in] conn_handle Connection handle. - * @param[in] hci_status_code HCI status code, see @ref BLE_HCI_STATUS_CODES (accepted values are @ref BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION and @ref BLE_HCI_CONN_INTERVAL_UNACCEPTABLE). - * - * @retval ::NRF_SUCCESS The disconnection procedure has been started successfully. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. - * @retval ::NRF_ERROR_INVALID_STATE Disconnection in progress or link has not been established. - */ -SVCALL(SD_BLE_GAP_DISCONNECT, uint32_t, sd_ble_gap_disconnect(uint16_t conn_handle, uint8_t hci_status_code)); - - -/**@brief Set the radio's transmit power. - * - * @param[in] role The role to set the transmit power for, see @ref BLE_GAP_TX_POWER_ROLES for - * possible roles. - * @param[in] handle The handle parameter is interpreted depending on role: - * - If role is @ref BLE_GAP_TX_POWER_ROLE_CONN, this value is the specific connection handle. - * - If role is @ref BLE_GAP_TX_POWER_ROLE_ADV, the advertising set identified with the advertising handle, - * will use the specified transmit power, and include it in the advertising packet headers if - * @ref ble_gap_adv_properties_t::include_tx_power set. - * - For all other roles handle is ignored. - * @param[in] tx_power Radio transmit power in dBm (see note for accepted values). - * - * @note Supported tx_power values: -40dBm, -20dBm, -16dBm, -12dBm, -8dBm, -4dBm, 0dBm, +2dBm, +3dBm, +4dBm, +5dBm, +6dBm, +7dBm and +8dBm. - * @note The initiator will have the same transmit power as the scanner. - * @note When a connection is created it will inherit the transmit power from the initiator or - * advertiser leading to the connection. - * - * @retval ::NRF_SUCCESS Successfully changed the transmit power. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. - * @retval ::BLE_ERROR_INVALID_ADV_HANDLE Advertising handle not found. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. - */ -SVCALL(SD_BLE_GAP_TX_POWER_SET, uint32_t, sd_ble_gap_tx_power_set(uint8_t role, uint16_t handle, int8_t tx_power)); - - -/**@brief Set GAP Appearance value. - * - * @param[in] appearance Appearance (16-bit), see @ref BLE_APPEARANCES. - * - * @retval ::NRF_SUCCESS Appearance value set successfully. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. - */ -SVCALL(SD_BLE_GAP_APPEARANCE_SET, uint32_t, sd_ble_gap_appearance_set(uint16_t appearance)); - - -/**@brief Get GAP Appearance value. - * - * @param[out] p_appearance Pointer to appearance (16-bit) to be filled in, see @ref BLE_APPEARANCES. - * - * @retval ::NRF_SUCCESS Appearance value retrieved successfully. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - */ -SVCALL(SD_BLE_GAP_APPEARANCE_GET, uint32_t, sd_ble_gap_appearance_get(uint16_t *p_appearance)); - - -/**@brief Set GAP Peripheral Preferred Connection Parameters. - * - * @param[in] p_conn_params Pointer to a @ref ble_gap_conn_params_t structure with the desired parameters. - * - * @retval ::NRF_SUCCESS Peripheral Preferred Connection Parameters set successfully. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. - */ -SVCALL(SD_BLE_GAP_PPCP_SET, uint32_t, sd_ble_gap_ppcp_set(ble_gap_conn_params_t const *p_conn_params)); - - -/**@brief Get GAP Peripheral Preferred Connection Parameters. - * - * @param[out] p_conn_params Pointer to a @ref ble_gap_conn_params_t structure where the parameters will be stored. - * - * @retval ::NRF_SUCCESS Peripheral Preferred Connection Parameters retrieved successfully. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - */ -SVCALL(SD_BLE_GAP_PPCP_GET, uint32_t, sd_ble_gap_ppcp_get(ble_gap_conn_params_t *p_conn_params)); - - -/**@brief Set GAP device name. - * - * @note If the device name is located in application flash memory (see @ref ble_gap_cfg_device_name_t), - * it cannot be changed. Then @ref NRF_ERROR_FORBIDDEN will be returned. - * - * @param[in] p_write_perm Write permissions for the Device Name characteristic, see @ref ble_gap_conn_sec_mode_t. - * @param[in] p_dev_name Pointer to a UTF-8 encoded, <b>non NULL-terminated</b> string. - * @param[in] len Length of the UTF-8, <b>non NULL-terminated</b> string pointed to by p_dev_name in octets (must be smaller or equal than @ref BLE_GAP_DEVNAME_MAX_LEN). - * - * @retval ::NRF_SUCCESS GAP device name and permissions set successfully. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. - * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied. - * @retval ::NRF_ERROR_FORBIDDEN Device name is not writable. - */ -SVCALL(SD_BLE_GAP_DEVICE_NAME_SET, uint32_t, sd_ble_gap_device_name_set(ble_gap_conn_sec_mode_t const *p_write_perm, uint8_t const *p_dev_name, uint16_t len)); - - -/**@brief Get GAP device name. - * - * @note If the device name is longer than the size of the supplied buffer, - * p_len will return the complete device name length, - * and not the number of bytes actually returned in p_dev_name. - * The application may use this information to allocate a suitable buffer size. - * - * @param[out] p_dev_name Pointer to an empty buffer where the UTF-8 <b>non NULL-terminated</b> string will be placed. Set to NULL to obtain the complete device name length. - * @param[in,out] p_len Length of the buffer pointed by p_dev_name, complete device name length on output. - * - * @retval ::NRF_SUCCESS GAP device name retrieved successfully. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied. - */ -SVCALL(SD_BLE_GAP_DEVICE_NAME_GET, uint32_t, sd_ble_gap_device_name_get(uint8_t *p_dev_name, uint16_t *p_len)); - - -/**@brief Initiate the GAP Authentication procedure. - * - * @details In the central role, this function will send an SMP Pairing Request (or an SMP Pairing Failed if rejected), - * otherwise in the peripheral role, an SMP Security Request will be sent. - * - * @events - * @event{Depending on the security parameters set and the packet exchanges with the peer\, the following events may be generated:} - * @event{@ref BLE_GAP_EVT_SEC_PARAMS_REQUEST} - * @event{@ref BLE_GAP_EVT_SEC_INFO_REQUEST} - * @event{@ref BLE_GAP_EVT_PASSKEY_DISPLAY} - * @event{@ref BLE_GAP_EVT_KEY_PRESSED} - * @event{@ref BLE_GAP_EVT_AUTH_KEY_REQUEST} - * @event{@ref BLE_GAP_EVT_LESC_DHKEY_REQUEST} - * @event{@ref BLE_GAP_EVT_CONN_SEC_UPDATE} - * @event{@ref BLE_GAP_EVT_AUTH_STATUS} - * @event{@ref BLE_GAP_EVT_TIMEOUT} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GAP_PERIPH_SEC_REQ_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_SEC_REQ_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_ENC_AUTH_MUTEX_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_PAIRING_JW_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_BONDING_JW_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_OOB_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_LESC_PAIRING_JW_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_NC_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_PD_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC} - * @endmscs - * - * @param[in] conn_handle Connection handle. - * @param[in] p_sec_params Pointer to the @ref ble_gap_sec_params_t structure with the security parameters to be used during the pairing or bonding procedure. - * In the peripheral role, only the bond, mitm, lesc and keypress fields of this structure are used. - * In the central role, this pointer may be NULL to reject a Security Request. - * - * @retval ::NRF_SUCCESS Successfully initiated authentication procedure. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. - * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either: - * - No link has been established. - * - An encryption is already executing or queued. - * @retval ::NRF_ERROR_NO_MEM The maximum number of authentication procedures that can run in parallel for the given role is reached. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. - * @retval ::NRF_ERROR_NOT_SUPPORTED Setting of sign or link fields in @ref ble_gap_sec_kdist_t not supported. - * @retval ::NRF_ERROR_TIMEOUT A SMP timeout has occurred, and further SMP operations on this link is prohibited. - */ -SVCALL(SD_BLE_GAP_AUTHENTICATE, uint32_t, sd_ble_gap_authenticate(uint16_t conn_handle, ble_gap_sec_params_t const *p_sec_params)); - - -/**@brief Reply with GAP security parameters. - * - * @details This function is only used to reply to a @ref BLE_GAP_EVT_SEC_PARAMS_REQUEST, calling it at other times will result in an @ref NRF_ERROR_INVALID_STATE. - * @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters. - * - * @events - * @event{This function is used during authentication procedures\, see the list of events in the documentation of @ref sd_ble_gap_authenticate.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GAP_PERIPH_PAIRING_JW_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_BONDING_JW_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_BONDING_PK_PERIPH_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_BONDING_PK_CENTRAL_OOB_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_BONDING_STATIC_PK_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_PAIRING_CONFIRM_FAIL_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_LESC_PAIRING_JW_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_NC_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_PD_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_CD_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_OOB_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_PAIRING_KS_TOO_SMALL_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_PAIRING_APP_ERROR_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_PAIRING_REMOTE_PAIRING_FAIL_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_PAIRING_TIMEOUT_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_PAIRING_JW_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_BONDING_JW_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_OOB_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_LESC_PAIRING_JW_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_NC_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_PD_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC} - * @endmscs - * - * @param[in] conn_handle Connection handle. - * @param[in] sec_status Security status, see @ref BLE_GAP_SEC_STATUS. - * @param[in] p_sec_params Pointer to a @ref ble_gap_sec_params_t security parameters structure. In the central role this must be set to NULL, as the parameters have - * already been provided during a previous call to @ref sd_ble_gap_authenticate. - * @param[in,out] p_sec_keyset Pointer to a @ref ble_gap_sec_keyset_t security keyset structure. Any keys generated and/or distributed as a result of the ongoing security procedure - * will be stored into the memory referenced by the pointers inside this structure. The keys will be stored and available to the application - * upon reception of a @ref BLE_GAP_EVT_AUTH_STATUS event. - * Note that the SoftDevice expects the application to provide memory for storing the - * peer's keys. So it must be ensured that the relevant pointers inside this structure are not NULL. The pointers to the local key - * can, however, be NULL, in which case, the local key data will not be available to the application upon reception of the - * @ref BLE_GAP_EVT_AUTH_STATUS event. - * - * @retval ::NRF_SUCCESS Successfully accepted security parameter from the application. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. - * @retval ::NRF_ERROR_INVALID_STATE Security parameters has not been requested. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. - * @retval ::NRF_ERROR_NOT_SUPPORTED Setting of sign or link fields in @ref ble_gap_sec_kdist_t not supported. - */ -SVCALL(SD_BLE_GAP_SEC_PARAMS_REPLY, uint32_t, sd_ble_gap_sec_params_reply(uint16_t conn_handle, uint8_t sec_status, ble_gap_sec_params_t const *p_sec_params, ble_gap_sec_keyset_t const *p_sec_keyset)); - - -/**@brief Reply with an authentication key. - * - * @details This function is only used to reply to a @ref BLE_GAP_EVT_AUTH_KEY_REQUEST or a @ref BLE_GAP_EVT_PASSKEY_DISPLAY, calling it at other times will result in an @ref NRF_ERROR_INVALID_STATE. - * @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters. - * - * @events - * @event{This function is used during authentication procedures\, see the list of events in the documentation of @ref sd_ble_gap_authenticate.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GAP_PERIPH_BONDING_PK_CENTRAL_OOB_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_NC_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_CD_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_OOB_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_NC_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC} - * @endmscs - * - * @param[in] conn_handle Connection handle. - * @param[in] key_type See @ref BLE_GAP_AUTH_KEY_TYPES. - * @param[in] p_key If key type is @ref BLE_GAP_AUTH_KEY_TYPE_NONE, then NULL. - * If key type is @ref BLE_GAP_AUTH_KEY_TYPE_PASSKEY, then a 6-byte ASCII string (digit 0..9 only, no NULL termination) - * or NULL when confirming LE Secure Connections Numeric Comparison. - * If key type is @ref BLE_GAP_AUTH_KEY_TYPE_OOB, then a 16-byte OOB key value in little-endian format. - * - * @retval ::NRF_SUCCESS Authentication key successfully set. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. - * @retval ::NRF_ERROR_INVALID_STATE Authentication key has not been requested. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. - */ -SVCALL(SD_BLE_GAP_AUTH_KEY_REPLY, uint32_t, sd_ble_gap_auth_key_reply(uint16_t conn_handle, uint8_t key_type, uint8_t const *p_key)); - - -/**@brief Reply with an LE Secure connections DHKey. - * - * @details This function is only used to reply to a @ref BLE_GAP_EVT_LESC_DHKEY_REQUEST, calling it at other times will result in an @ref NRF_ERROR_INVALID_STATE. - * @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters. - * - * @events - * @event{This function is used during authentication procedures\, see the list of events in the documentation of @ref sd_ble_gap_authenticate.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GAP_PERIPH_LESC_PAIRING_JW_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_NC_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_PD_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_CD_MSC} - * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_OOB_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_LESC_PAIRING_JW_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_NC_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_PD_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC} - * @endmscs - * - * @param[in] conn_handle Connection handle. - * @param[in] p_dhkey LE Secure Connections DHKey. - * - * @retval ::NRF_SUCCESS DHKey successfully set. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. - * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either: - * - The peer is not authenticated. - * - The application has not pulled a @ref BLE_GAP_EVT_LESC_DHKEY_REQUEST event. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. - */ -SVCALL(SD_BLE_GAP_LESC_DHKEY_REPLY, uint32_t, sd_ble_gap_lesc_dhkey_reply(uint16_t conn_handle, ble_gap_lesc_dhkey_t const *p_dhkey)); - - -/**@brief Notify the peer of a local keypress. - * - * @mscs - * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_CD_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC} - * @endmscs - * - * @param[in] conn_handle Connection handle. - * @param[in] kp_not See @ref BLE_GAP_KP_NOT_TYPES. - * - * @retval ::NRF_SUCCESS Keypress notification successfully queued for transmission. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. - * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either: - * - Authentication key not requested. - * - Passkey has not been entered. - * - Keypresses have not been enabled by both peers. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. - * @retval ::NRF_ERROR_BUSY The BLE stack is busy. Retry at later time. - */ -SVCALL(SD_BLE_GAP_KEYPRESS_NOTIFY, uint32_t, sd_ble_gap_keypress_notify(uint16_t conn_handle, uint8_t kp_not)); - - -/**@brief Generate a set of OOB data to send to a peer out of band. - * - * @note The @ref ble_gap_addr_t included in the OOB data returned will be the currently active one (or, if a connection has already been established, - * the one used during connection setup). The application may manually overwrite it with an updated value. - * - * @mscs - * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_OOB_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC} - * @endmscs - * - * @param[in] conn_handle Connection handle. Can be @ref BLE_CONN_HANDLE_INVALID if a BLE connection has not been established yet. - * @param[in] p_pk_own LE Secure Connections local P-256 Public Key. - * @param[out] p_oobd_own The OOB data to be sent out of band to a peer. - * - * @retval ::NRF_SUCCESS OOB data successfully generated. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. - */ -SVCALL(SD_BLE_GAP_LESC_OOB_DATA_GET, uint32_t, sd_ble_gap_lesc_oob_data_get(uint16_t conn_handle, ble_gap_lesc_p256_pk_t const *p_pk_own, ble_gap_lesc_oob_data_t *p_oobd_own)); - -/**@brief Provide the OOB data sent/received out of band. - * - * @note An authentication procedure with OOB selected as an algorithm must be in progress when calling this function. - * @note A @ref BLE_GAP_EVT_LESC_DHKEY_REQUEST event with the oobd_req set to 1 must have been received prior to calling this function. - * - * @events - * @event{This function is used during authentication procedures\, see the list of events in the documentation of @ref sd_ble_gap_authenticate.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_OOB_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC} - * @endmscs - * - * @param[in] conn_handle Connection handle. - * @param[in] p_oobd_own The OOB data sent out of band to a peer or NULL if the peer has not received OOB data. - * Must correspond to @ref ble_gap_sec_params_t::oob flag in @ref BLE_GAP_EVT_SEC_PARAMS_REQUEST. - * @param[in] p_oobd_peer The OOB data received out of band from a peer or NULL if none received. - * Must correspond to @ref ble_gap_sec_params_t::oob flag - * in @ref sd_ble_gap_authenticate in the central role or - * in @ref sd_ble_gap_sec_params_reply in the peripheral role. - * - * @retval ::NRF_SUCCESS OOB data accepted. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either: - * - Authentication key not requested - * - Not expecting LESC OOB data - * - Have not actually exchanged passkeys. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. - */ -SVCALL(SD_BLE_GAP_LESC_OOB_DATA_SET, uint32_t, sd_ble_gap_lesc_oob_data_set(uint16_t conn_handle, ble_gap_lesc_oob_data_t const *p_oobd_own, ble_gap_lesc_oob_data_t const *p_oobd_peer)); - - -/**@brief Initiate GAP Encryption procedure. - * - * @details In the central role, this function will initiate the encryption procedure using the encryption information provided. - * - * @events - * @event{@ref BLE_GAP_EVT_CONN_SEC_UPDATE, The connection security has been updated.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GAP_CENTRAL_ENC_AUTH_MUTEX_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_ENC_MSC} - * @mmsc{@ref BLE_GAP_MULTILINK_CTRL_PROC_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_SEC_REQ_MSC} - * @endmscs - * - * @param[in] conn_handle Connection handle. - * @param[in] p_master_id Pointer to a @ref ble_gap_master_id_t master identification structure. - * @param[in] p_enc_info Pointer to a @ref ble_gap_enc_info_t encryption information structure. - * - * @retval ::NRF_SUCCESS Successfully initiated authentication procedure. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_STATE No link has been established. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. - * @retval ::BLE_ERROR_INVALID_ROLE Operation is not supported in the Peripheral role. - * @retval ::NRF_ERROR_BUSY Procedure already in progress or not allowed at this time, wait for pending procedures to complete and retry. - */ -SVCALL(SD_BLE_GAP_ENCRYPT, uint32_t, sd_ble_gap_encrypt(uint16_t conn_handle, ble_gap_master_id_t const *p_master_id, ble_gap_enc_info_t const *p_enc_info)); - - -/**@brief Reply with GAP security information. - * - * @details This function is only used to reply to a @ref BLE_GAP_EVT_SEC_INFO_REQUEST, calling it at other times will result in @ref NRF_ERROR_INVALID_STATE. - * @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters. - * @note Data signing is not yet supported, and p_sign_info must therefore be NULL. - * - * @mscs - * @mmsc{@ref BLE_GAP_PERIPH_ENC_MSC} - * @endmscs - * - * @param[in] conn_handle Connection handle. - * @param[in] p_enc_info Pointer to a @ref ble_gap_enc_info_t encryption information structure. May be NULL to signal none is available. - * @param[in] p_id_info Pointer to a @ref ble_gap_irk_t identity information structure. May be NULL to signal none is available. - * @param[in] p_sign_info Pointer to a @ref ble_gap_sign_info_t signing information structure. May be NULL to signal none is available. - * - * @retval ::NRF_SUCCESS Successfully accepted security information. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. - * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either: - * - No link has been established. - * - No @ref BLE_GAP_EVT_SEC_REQUEST pending. - * - LE long term key requested command not allowed. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. - */ -SVCALL(SD_BLE_GAP_SEC_INFO_REPLY, uint32_t, sd_ble_gap_sec_info_reply(uint16_t conn_handle, ble_gap_enc_info_t const *p_enc_info, ble_gap_irk_t const *p_id_info, ble_gap_sign_info_t const *p_sign_info)); - - -/**@brief Get the current connection security. - * - * @param[in] conn_handle Connection handle. - * @param[out] p_conn_sec Pointer to a @ref ble_gap_conn_sec_t structure to be filled in. - * - * @retval ::NRF_SUCCESS Current connection security successfully retrieved. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. - */ -SVCALL(SD_BLE_GAP_CONN_SEC_GET, uint32_t, sd_ble_gap_conn_sec_get(uint16_t conn_handle, ble_gap_conn_sec_t *p_conn_sec)); - - -/**@brief Start reporting the received signal strength to the application. - * - * A new event is reported whenever the RSSI value changes, until @ref sd_ble_gap_rssi_stop is called. - * - * @events - * @event{@ref BLE_GAP_EVT_RSSI_CHANGED, New RSSI data available. How often the event is generated is - * dependent on the settings of the <code>threshold_dbm</code> - * and <code>skip_count</code> input parameters.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GAP_CENTRAL_RSSI_READ_MSC} - * @mmsc{@ref BLE_GAP_RSSI_FILT_MSC} - * @endmscs - * - * @param[in] conn_handle Connection handle. - * @param[in] threshold_dbm Minimum change in dBm before triggering the @ref BLE_GAP_EVT_RSSI_CHANGED event. Events are disabled if threshold_dbm equals @ref BLE_GAP_RSSI_THRESHOLD_INVALID. - * @param[in] skip_count Number of RSSI samples with a change of threshold_dbm or more before sending a new @ref BLE_GAP_EVT_RSSI_CHANGED event. - * - * @retval ::NRF_SUCCESS Successfully activated RSSI reporting. - * @retval ::NRF_ERROR_INVALID_STATE RSSI reporting is already ongoing. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. - */ -SVCALL(SD_BLE_GAP_RSSI_START, uint32_t, sd_ble_gap_rssi_start(uint16_t conn_handle, uint8_t threshold_dbm, uint8_t skip_count)); - - -/**@brief Stop reporting the received signal strength. - * - * @note An RSSI change detected before the call but not yet received by the application - * may be reported after @ref sd_ble_gap_rssi_stop has been called. - * - * @mscs - * @mmsc{@ref BLE_GAP_CENTRAL_RSSI_READ_MSC} - * @mmsc{@ref BLE_GAP_RSSI_FILT_MSC} - * @endmscs - * - * @param[in] conn_handle Connection handle. - * - * @retval ::NRF_SUCCESS Successfully deactivated RSSI reporting. - * @retval ::NRF_ERROR_INVALID_STATE RSSI reporting is not ongoing. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. - */ -SVCALL(SD_BLE_GAP_RSSI_STOP, uint32_t, sd_ble_gap_rssi_stop(uint16_t conn_handle)); - - -/**@brief Get the received signal strength for the last connection event. - * - * @ref sd_ble_gap_rssi_start must be called to start reporting RSSI before using this function. @ref NRF_ERROR_NOT_FOUND - * will be returned until RSSI was sampled for the first time after calling @ref sd_ble_gap_rssi_start. - * @note ERRATA-153 requires the rssi sample to be compensated based on a temperature measurement. - * @mscs - * @mmsc{@ref BLE_GAP_CENTRAL_RSSI_READ_MSC} - * @endmscs - * - * @param[in] conn_handle Connection handle. - * @param[out] p_rssi Pointer to the location where the RSSI measurement shall be stored. - * @param[out] p_ch_index Pointer to the location where Channel Index for the RSSI measurement shall be stored. - * - * @retval ::NRF_SUCCESS Successfully read the RSSI. - * @retval ::NRF_ERROR_NOT_FOUND No sample is available. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. - * @retval ::NRF_ERROR_INVALID_STATE RSSI reporting is not ongoing. - */ -SVCALL(SD_BLE_GAP_RSSI_GET, uint32_t, sd_ble_gap_rssi_get(uint16_t conn_handle, int8_t *p_rssi, uint8_t *p_ch_index)); - - -/**@brief Start or continue scanning (GAP Discovery procedure, Observer Procedure). - * - * @note A call to this function will require the application to keep the memory pointed by - * p_adv_report_buffer alive until the buffer is released. The buffer is released when the scanner is stopped - * or when this function is called with another buffer. - * - * @note The scanner will automatically stop in the following cases: - * - @ref sd_ble_gap_scan_stop is called. - * - @ref sd_ble_gap_connect is called. - * - A @ref BLE_GAP_EVT_TIMEOUT with source set to @ref BLE_GAP_TIMEOUT_SRC_SCAN is received. - * - When a @ref BLE_GAP_EVT_ADV_REPORT event is received and @ref ble_gap_adv_report_type_t::status is not set to - * @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA. In this case scanning is only paused to let the application - * access received data. The application must call this function to continue scanning, or call @ref sd_ble_gap_scan_stop - * to stop scanning. - * - * @note If a @ref BLE_GAP_EVT_ADV_REPORT event is received with @ref ble_gap_adv_report_type_t::status set to - * @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA, the scanner will continue scanning, and the application will - * receive more reports from this advertising event. The following reports will include the old and new received data. - * - * @events - * @event{@ref BLE_GAP_EVT_ADV_REPORT, An advertising or scan response packet has been received.} - * @event{@ref BLE_GAP_EVT_TIMEOUT, Scanner has timed out.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GAP_SCAN_MSC} - * @mmsc{@ref BLE_GAP_WL_SHARE_MSC} - * @endmscs - * - * @param[in] p_scan_params Pointer to scan parameters structure. When this function is used to continue - * scanning, this parameter must be NULL. - * @param[in] p_adv_report_buffer Pointer to buffer used to store incoming advertising data. - * The memory pointed to should be kept alive until the scanning is stopped. - * See @ref BLE_GAP_SCAN_BUFFER_SIZE for minimum and maximum buffer size. - * If the scanner receives advertising data larger than can be stored in the buffer, - * a @ref BLE_GAP_EVT_ADV_REPORT will be raised with @ref ble_gap_adv_report_type_t::status - * set to @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_TRUNCATED. - * - * @retval ::NRF_SUCCESS Successfully initiated scanning procedure. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either: - * - Scanning is already ongoing and p_scan_params was not NULL - * - Scanning is not running and p_scan_params was NULL. - * - The scanner has timed out when this function is called to continue scanning. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. See @ref ble_gap_scan_params_t. - * @retval ::NRF_ERROR_NOT_SUPPORTED Unsupported parameters supplied. See @ref ble_gap_scan_params_t. - * @retval ::NRF_ERROR_INVALID_LENGTH The provided buffer length is invalid. See @ref BLE_GAP_SCAN_BUFFER_MIN. - * @retval ::NRF_ERROR_RESOURCES Not enough BLE role slots available. - * Stop one or more currently active roles (Central, Peripheral or Broadcaster) and try again - */ -SVCALL(SD_BLE_GAP_SCAN_START, uint32_t, sd_ble_gap_scan_start(ble_gap_scan_params_t const *p_scan_params, ble_data_t const * p_adv_report_buffer)); - - -/**@brief Stop scanning (GAP Discovery procedure, Observer Procedure). - * - * @note The buffer provided in @ref sd_ble_gap_scan_start is released. - * - * @mscs - * @mmsc{@ref BLE_GAP_SCAN_MSC} - * @mmsc{@ref BLE_GAP_WL_SHARE_MSC} - * @endmscs - * - * @retval ::NRF_SUCCESS Successfully stopped scanning procedure. - * @retval ::NRF_ERROR_INVALID_STATE Not in the scanning state. - */ -SVCALL(SD_BLE_GAP_SCAN_STOP, uint32_t, sd_ble_gap_scan_stop(void)); - - -/**@brief Create a connection (GAP Link Establishment). - * - * @note If a scanning procedure is currently in progress it will be automatically stopped when calling this function. - * The scanning procedure will be stopped even if the function returns an error. - * - * @events - * @event{@ref BLE_GAP_EVT_CONNECTED, A connection was established.} - * @event{@ref BLE_GAP_EVT_TIMEOUT, Failed to establish a connection.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GAP_WL_SHARE_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_CONN_PRIV_MSC} - * @mmsc{@ref BLE_GAP_CENTRAL_CONN_MSC} - * @endmscs - * - * @param[in] p_peer_addr Pointer to peer identity address. If @ref ble_gap_scan_params_t::filter_policy is set to use - * whitelist, then p_peer_addr is ignored. - * @param[in] p_scan_params Pointer to scan parameters structure. - * @param[in] p_conn_params Pointer to desired connection parameters. - * @param[in] conn_cfg_tag Tag identifying a configuration set by @ref sd_ble_cfg_set or - * @ref BLE_CONN_CFG_TAG_DEFAULT to use the default connection configuration. - * - * @retval ::NRF_SUCCESS Successfully initiated connection procedure. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid parameter(s) pointer supplied. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. - * - Invalid parameter(s) in p_scan_params or p_conn_params. - * - Use of whitelist requested but whitelist has not been set, see @ref sd_ble_gap_whitelist_set. - * - Peer address was not present in the device identity list, see @ref sd_ble_gap_device_identities_set. - * @retval ::NRF_ERROR_NOT_FOUND conn_cfg_tag not found. - * @retval ::NRF_ERROR_INVALID_STATE The SoftDevice is in an invalid state to perform this operation. This may be due to an - * existing locally initiated connect procedure, which must complete before initiating again. - * @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid Peer address. - * @retval ::NRF_ERROR_CONN_COUNT The limit of available connections has been reached. - * @retval ::NRF_ERROR_RESOURCES Either: - * - Not enough BLE role slots available. - * Stop one or more currently active roles (Central, Peripheral or Observer) and try again. - * - The event_length parameter associated with conn_cfg_tag is too small to be able to - * establish a connection on the selected @ref ble_gap_scan_params_t::scan_phys. - * Use @ref sd_ble_cfg_set to increase the event length. - */ -SVCALL(SD_BLE_GAP_CONNECT, uint32_t, sd_ble_gap_connect(ble_gap_addr_t const *p_peer_addr, ble_gap_scan_params_t const *p_scan_params, ble_gap_conn_params_t const *p_conn_params, uint8_t conn_cfg_tag)); - - -/**@brief Cancel a connection establishment. - * - * @mscs - * @mmsc{@ref BLE_GAP_CENTRAL_CONN_MSC} - * @endmscs - * - * @retval ::NRF_SUCCESS Successfully canceled an ongoing connection procedure. - * @retval ::NRF_ERROR_INVALID_STATE No locally initiated connect procedure started or connection - * completed occurred. - */ -SVCALL(SD_BLE_GAP_CONNECT_CANCEL, uint32_t, sd_ble_gap_connect_cancel(void)); - - -/**@brief Initiate or respond to a PHY Update Procedure - * - * @details This function is used to initiate or respond to a PHY Update Procedure. It will always - * generate a @ref BLE_GAP_EVT_PHY_UPDATE event if successfully executed. - * If this function is used to initiate a PHY Update procedure and the only option - * provided in @ref ble_gap_phys_t::tx_phys and @ref ble_gap_phys_t::rx_phys is the - * currently active PHYs in the respective directions, the SoftDevice will generate a - * @ref BLE_GAP_EVT_PHY_UPDATE with the current PHYs set and will not initiate the - * procedure in the Link Layer. - * - * If @ref ble_gap_phys_t::tx_phys or @ref ble_gap_phys_t::rx_phys is @ref BLE_GAP_PHY_AUTO, - * then the stack will select PHYs based on the peer's PHY preferences and the local link - * configuration. The PHY Update procedure will for this case result in a PHY combination - * that respects the time constraints configured with @ref sd_ble_cfg_set and the current - * link layer data length. - * - * When acting as a central, the SoftDevice will select the fastest common PHY in each direction. - * - * If the peer does not support the PHY Update Procedure, then the resulting - * @ref BLE_GAP_EVT_PHY_UPDATE event will have a status set to - * @ref BLE_HCI_UNSUPPORTED_REMOTE_FEATURE. - * - * If the PHY procedure was rejected by the peer due to a procedure collision, the status - * will be @ref BLE_HCI_STATUS_CODE_LMP_ERROR_TRANSACTION_COLLISION or - * @ref BLE_HCI_DIFFERENT_TRANSACTION_COLLISION. - * If the peer responds to the PHY Update procedure with invalid parameters, the status - * will be @ref BLE_HCI_STATUS_CODE_INVALID_LMP_PARAMETERS. - * If the PHY procedure was rejected by the peer for a different reason, the status will - * contain the reason as specified by the peer. - * - * @events - * @event{@ref BLE_GAP_EVT_PHY_UPDATE, Result of the PHY Update Procedure.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GAP_CENTRAL_PHY_UPDATE} - * @mmsc{@ref BLE_GAP_PERIPHERAL_PHY_UPDATE} - * @endmscs - * - * @param[in] conn_handle Connection handle to indicate the connection for which the PHY Update is requested. - * @param[in] p_gap_phys Pointer to PHY structure. - * - * @retval ::NRF_SUCCESS Successfully requested a PHY Update. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. - * @retval ::NRF_ERROR_INVALID_STATE No link has been established. - * @retval ::NRF_ERROR_RESOURCES The connection event length configured for this link is not sufficient for the combination of - * @ref ble_gap_phys_t::tx_phys, @ref ble_gap_phys_t::rx_phys, and @ref ble_gap_data_length_params_t. - * The connection event length is configured with @ref BLE_CONN_CFG_GAP using @ref sd_ble_cfg_set. - * @retval ::NRF_ERROR_BUSY Procedure is already in progress or not allowed at this time. Process pending events and wait for the pending procedure to complete and retry. - * - */ -SVCALL(SD_BLE_GAP_PHY_UPDATE, uint32_t, sd_ble_gap_phy_update(uint16_t conn_handle, ble_gap_phys_t const *p_gap_phys)); - - -/**@brief Initiate or respond to a Data Length Update Procedure. - * - * @note If the application uses @ref BLE_GAP_DATA_LENGTH_AUTO for one or more members of - * p_dl_params, the SoftDevice will choose the highest value supported in current - * configuration and connection parameters. - * @note If the link PHY is Coded, the SoftDevice will ensure that the MaxTxTime and/or MaxRxTime - * used in the Data Length Update procedure is at least 2704 us. Otherwise, MaxTxTime and - * MaxRxTime will be limited to maximum 2120 us. - * - * @param[in] conn_handle Connection handle. - * @param[in] p_dl_params Pointer to local parameters to be used in Data Length Update - * Procedure. Set any member to @ref BLE_GAP_DATA_LENGTH_AUTO to let - * the SoftDevice automatically decide the value for that member. - * Set to NULL to use automatic values for all members. - * @param[out] p_dl_limitation Pointer to limitation to be written when local device does not - * have enough resources or does not support the requested Data Length - * Update parameters. Ignored if NULL. - * - * @mscs - * @mmsc{@ref BLE_GAP_DATA_LENGTH_UPDATE_PROCEDURE_MSC} - * @endmscs - * - * @retval ::NRF_SUCCESS Successfully set Data Length Extension initiation/response parameters. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle parameter supplied. - * @retval ::NRF_ERROR_INVALID_STATE No link has been established. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameters supplied. - * @retval ::NRF_ERROR_NOT_SUPPORTED The requested parameters are not supported by the SoftDevice. Inspect - * p_dl_limitation to see which parameter is not supported. - * @retval ::NRF_ERROR_RESOURCES The connection event length configured for this link is not sufficient for the requested parameters. - * Use @ref sd_ble_cfg_set with @ref BLE_CONN_CFG_GAP to increase the connection event length. - * Inspect p_dl_limitation to see where the limitation is. - * @retval ::NRF_ERROR_BUSY Peer has already initiated a Data Length Update Procedure. Process the - * pending @ref BLE_GAP_EVT_DATA_LENGTH_UPDATE_REQUEST event to respond. - */ -SVCALL(SD_BLE_GAP_DATA_LENGTH_UPDATE, uint32_t, sd_ble_gap_data_length_update(uint16_t conn_handle, ble_gap_data_length_params_t const *p_dl_params, ble_gap_data_length_limitation_t *p_dl_limitation)); - -/**@brief Start the Quality of Service (QoS) channel survey module. - * - * @details The channel survey module provides measurements of the energy levels on - * the Bluetooth Low Energy channels. When the module is enabled, @ref BLE_GAP_EVT_QOS_CHANNEL_SURVEY_REPORT - * events will periodically report the measured energy levels for each channel. - * - * @note The measurements are scheduled with lower priority than other Bluetooth Low Energy roles, - * Radio Timeslot API events and Flash API events. - * - * @note The channel survey module will attempt to do measurements so that the average interval - * between measurements will be interval_us. However due to the channel survey module - * having the lowest priority of all roles and modules, this may not be possible. In that - * case fewer than expected channel survey reports may be given. - * - * @note In order to use the channel survey module, @ref ble_gap_cfg_role_count_t::qos_channel_survey_role_available - * must be set. This is done using @ref sd_ble_cfg_set. - * - * @param[in] interval_us Requested average interval for the measurements and reports. See - * @ref BLE_GAP_QOS_CHANNEL_SURVEY_INTERVALS for valid ranges. If set - * to @ref BLE_GAP_QOS_CHANNEL_SURVEY_INTERVAL_CONTINUOUS, the channel - * survey role will be scheduled at every available opportunity. - * - * @retval ::NRF_SUCCESS The module is successfully started. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter supplied. interval_us is out of the - * allowed range. - * @retval ::NRF_ERROR_INVALID_STATE Trying to start the module when already running. - * @retval ::NRF_ERROR_RESOURCES The channel survey module is not available to the application. - * Set @ref ble_gap_cfg_role_count_t::qos_channel_survey_role_available using - * @ref sd_ble_cfg_set. - */ -SVCALL(SD_BLE_GAP_QOS_CHANNEL_SURVEY_START, uint32_t, sd_ble_gap_qos_channel_survey_start(uint32_t interval_us)); - -/**@brief Stop the Quality of Service (QoS) channel survey module. - * - * @retval ::NRF_SUCCESS The module is successfully stopped. - * @retval ::NRF_ERROR_INVALID_STATE Trying to stop the module when it is not running. - */ -SVCALL(SD_BLE_GAP_QOS_CHANNEL_SURVEY_STOP, uint32_t, sd_ble_gap_qos_channel_survey_stop(void)); - - -/** @} */ - -#ifdef __cplusplus -} -#endif -#endif // BLE_GAP_H__ - -/** - @} -*/ diff --git a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gatt.h b/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gatt.h deleted file mode 100755 index 9cb577cc..00000000 --- a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gatt.h +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Copyright (c) 2013 - 2018, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - @addtogroup BLE_GATT Generic Attribute Profile (GATT) Common - @{ - @brief Common definitions and prototypes for the GATT interfaces. - */ - -#ifndef BLE_GATT_H__ -#define BLE_GATT_H__ - -#include <stdint.h> -#include "nrf_svc.h" -#include "nrf_error.h" -#include "ble_hci.h" -#include "ble_ranges.h" -#include "ble_types.h" -#include "ble_err.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/** @addtogroup BLE_GATT_DEFINES Defines - * @{ */ - -/** @brief Default ATT MTU, in bytes. */ -#define BLE_GATT_ATT_MTU_DEFAULT 23 - -/**@brief Invalid Attribute Handle. */ -#define BLE_GATT_HANDLE_INVALID 0x0000 - -/**@brief First Attribute Handle. */ -#define BLE_GATT_HANDLE_START 0x0001 - -/**@brief Last Attribute Handle. */ -#define BLE_GATT_HANDLE_END 0xFFFF - -/** @defgroup BLE_GATT_TIMEOUT_SOURCES GATT Timeout sources - * @{ */ -#define BLE_GATT_TIMEOUT_SRC_PROTOCOL 0x00 /**< ATT Protocol timeout. */ -/** @} */ - -/** @defgroup BLE_GATT_WRITE_OPS GATT Write operations - * @{ */ -#define BLE_GATT_OP_INVALID 0x00 /**< Invalid Operation. */ -#define BLE_GATT_OP_WRITE_REQ 0x01 /**< Write Request. */ -#define BLE_GATT_OP_WRITE_CMD 0x02 /**< Write Command. */ -#define BLE_GATT_OP_SIGN_WRITE_CMD 0x03 /**< Signed Write Command. */ -#define BLE_GATT_OP_PREP_WRITE_REQ 0x04 /**< Prepare Write Request. */ -#define BLE_GATT_OP_EXEC_WRITE_REQ 0x05 /**< Execute Write Request. */ -/** @} */ - -/** @defgroup BLE_GATT_EXEC_WRITE_FLAGS GATT Execute Write flags - * @{ */ -#define BLE_GATT_EXEC_WRITE_FLAG_PREPARED_CANCEL 0x00 /**< Cancel prepared write. */ -#define BLE_GATT_EXEC_WRITE_FLAG_PREPARED_WRITE 0x01 /**< Execute prepared write. */ -/** @} */ - -/** @defgroup BLE_GATT_HVX_TYPES GATT Handle Value operations - * @{ */ -#define BLE_GATT_HVX_INVALID 0x00 /**< Invalid Operation. */ -#define BLE_GATT_HVX_NOTIFICATION 0x01 /**< Handle Value Notification. */ -#define BLE_GATT_HVX_INDICATION 0x02 /**< Handle Value Indication. */ -/** @} */ - -/** @defgroup BLE_GATT_STATUS_CODES GATT Status Codes - * @{ */ -#define BLE_GATT_STATUS_SUCCESS 0x0000 /**< Success. */ -#define BLE_GATT_STATUS_UNKNOWN 0x0001 /**< Unknown or not applicable status. */ -#define BLE_GATT_STATUS_ATTERR_INVALID 0x0100 /**< ATT Error: Invalid Error Code. */ -#define BLE_GATT_STATUS_ATTERR_INVALID_HANDLE 0x0101 /**< ATT Error: Invalid Attribute Handle. */ -#define BLE_GATT_STATUS_ATTERR_READ_NOT_PERMITTED 0x0102 /**< ATT Error: Read not permitted. */ -#define BLE_GATT_STATUS_ATTERR_WRITE_NOT_PERMITTED 0x0103 /**< ATT Error: Write not permitted. */ -#define BLE_GATT_STATUS_ATTERR_INVALID_PDU 0x0104 /**< ATT Error: Used in ATT as Invalid PDU. */ -#define BLE_GATT_STATUS_ATTERR_INSUF_AUTHENTICATION 0x0105 /**< ATT Error: Authenticated link required. */ -#define BLE_GATT_STATUS_ATTERR_REQUEST_NOT_SUPPORTED 0x0106 /**< ATT Error: Used in ATT as Request Not Supported. */ -#define BLE_GATT_STATUS_ATTERR_INVALID_OFFSET 0x0107 /**< ATT Error: Offset specified was past the end of the attribute. */ -#define BLE_GATT_STATUS_ATTERR_INSUF_AUTHORIZATION 0x0108 /**< ATT Error: Used in ATT as Insufficient Authorization. */ -#define BLE_GATT_STATUS_ATTERR_PREPARE_QUEUE_FULL 0x0109 /**< ATT Error: Used in ATT as Prepare Queue Full. */ -#define BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_FOUND 0x010A /**< ATT Error: Used in ATT as Attribute not found. */ -#define BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_LONG 0x010B /**< ATT Error: Attribute cannot be read or written using read/write blob requests. */ -#define BLE_GATT_STATUS_ATTERR_INSUF_ENC_KEY_SIZE 0x010C /**< ATT Error: Encryption key size used is insufficient. */ -#define BLE_GATT_STATUS_ATTERR_INVALID_ATT_VAL_LENGTH 0x010D /**< ATT Error: Invalid value size. */ -#define BLE_GATT_STATUS_ATTERR_UNLIKELY_ERROR 0x010E /**< ATT Error: Very unlikely error. */ -#define BLE_GATT_STATUS_ATTERR_INSUF_ENCRYPTION 0x010F /**< ATT Error: Encrypted link required. */ -#define BLE_GATT_STATUS_ATTERR_UNSUPPORTED_GROUP_TYPE 0x0110 /**< ATT Error: Attribute type is not a supported grouping attribute. */ -#define BLE_GATT_STATUS_ATTERR_INSUF_RESOURCES 0x0111 /**< ATT Error: Encrypted link required. */ -#define BLE_GATT_STATUS_ATTERR_RFU_RANGE1_BEGIN 0x0112 /**< ATT Error: Reserved for Future Use range #1 begin. */ -#define BLE_GATT_STATUS_ATTERR_RFU_RANGE1_END 0x017F /**< ATT Error: Reserved for Future Use range #1 end. */ -#define BLE_GATT_STATUS_ATTERR_APP_BEGIN 0x0180 /**< ATT Error: Application range begin. */ -#define BLE_GATT_STATUS_ATTERR_APP_END 0x019F /**< ATT Error: Application range end. */ -#define BLE_GATT_STATUS_ATTERR_RFU_RANGE2_BEGIN 0x01A0 /**< ATT Error: Reserved for Future Use range #2 begin. */ -#define BLE_GATT_STATUS_ATTERR_RFU_RANGE2_END 0x01DF /**< ATT Error: Reserved for Future Use range #2 end. */ -#define BLE_GATT_STATUS_ATTERR_RFU_RANGE3_BEGIN 0x01E0 /**< ATT Error: Reserved for Future Use range #3 begin. */ -#define BLE_GATT_STATUS_ATTERR_RFU_RANGE3_END 0x01FC /**< ATT Error: Reserved for Future Use range #3 end. */ -#define BLE_GATT_STATUS_ATTERR_CPS_WRITE_REQ_REJECTED 0x01FC /**< ATT Common Profile and Service Error: Write request rejected. */ -#define BLE_GATT_STATUS_ATTERR_CPS_CCCD_CONFIG_ERROR 0x01FD /**< ATT Common Profile and Service Error: Client Characteristic Configuration Descriptor improperly configured. */ -#define BLE_GATT_STATUS_ATTERR_CPS_PROC_ALR_IN_PROG 0x01FE /**< ATT Common Profile and Service Error: Procedure Already in Progress. */ -#define BLE_GATT_STATUS_ATTERR_CPS_OUT_OF_RANGE 0x01FF /**< ATT Common Profile and Service Error: Out Of Range. */ -/** @} */ - - -/** @defgroup BLE_GATT_CPF_FORMATS Characteristic Presentation Formats - * @note Found at http://developer.bluetooth.org/gatt/descriptors/Pages/DescriptorViewer.aspx?u=org.bluetooth.descriptor.gatt.characteristic_presentation_format.xml - * @{ */ -#define BLE_GATT_CPF_FORMAT_RFU 0x00 /**< Reserved For Future Use. */ -#define BLE_GATT_CPF_FORMAT_BOOLEAN 0x01 /**< Boolean. */ -#define BLE_GATT_CPF_FORMAT_2BIT 0x02 /**< Unsigned 2-bit integer. */ -#define BLE_GATT_CPF_FORMAT_NIBBLE 0x03 /**< Unsigned 4-bit integer. */ -#define BLE_GATT_CPF_FORMAT_UINT8 0x04 /**< Unsigned 8-bit integer. */ -#define BLE_GATT_CPF_FORMAT_UINT12 0x05 /**< Unsigned 12-bit integer. */ -#define BLE_GATT_CPF_FORMAT_UINT16 0x06 /**< Unsigned 16-bit integer. */ -#define BLE_GATT_CPF_FORMAT_UINT24 0x07 /**< Unsigned 24-bit integer. */ -#define BLE_GATT_CPF_FORMAT_UINT32 0x08 /**< Unsigned 32-bit integer. */ -#define BLE_GATT_CPF_FORMAT_UINT48 0x09 /**< Unsigned 48-bit integer. */ -#define BLE_GATT_CPF_FORMAT_UINT64 0x0A /**< Unsigned 64-bit integer. */ -#define BLE_GATT_CPF_FORMAT_UINT128 0x0B /**< Unsigned 128-bit integer. */ -#define BLE_GATT_CPF_FORMAT_SINT8 0x0C /**< Signed 2-bit integer. */ -#define BLE_GATT_CPF_FORMAT_SINT12 0x0D /**< Signed 12-bit integer. */ -#define BLE_GATT_CPF_FORMAT_SINT16 0x0E /**< Signed 16-bit integer. */ -#define BLE_GATT_CPF_FORMAT_SINT24 0x0F /**< Signed 24-bit integer. */ -#define BLE_GATT_CPF_FORMAT_SINT32 0x10 /**< Signed 32-bit integer. */ -#define BLE_GATT_CPF_FORMAT_SINT48 0x11 /**< Signed 48-bit integer. */ -#define BLE_GATT_CPF_FORMAT_SINT64 0x12 /**< Signed 64-bit integer. */ -#define BLE_GATT_CPF_FORMAT_SINT128 0x13 /**< Signed 128-bit integer. */ -#define BLE_GATT_CPF_FORMAT_FLOAT32 0x14 /**< IEEE-754 32-bit floating point. */ -#define BLE_GATT_CPF_FORMAT_FLOAT64 0x15 /**< IEEE-754 64-bit floating point. */ -#define BLE_GATT_CPF_FORMAT_SFLOAT 0x16 /**< IEEE-11073 16-bit SFLOAT. */ -#define BLE_GATT_CPF_FORMAT_FLOAT 0x17 /**< IEEE-11073 32-bit FLOAT. */ -#define BLE_GATT_CPF_FORMAT_DUINT16 0x18 /**< IEEE-20601 format. */ -#define BLE_GATT_CPF_FORMAT_UTF8S 0x19 /**< UTF-8 string. */ -#define BLE_GATT_CPF_FORMAT_UTF16S 0x1A /**< UTF-16 string. */ -#define BLE_GATT_CPF_FORMAT_STRUCT 0x1B /**< Opaque Structure. */ -/** @} */ - -/** @defgroup BLE_GATT_CPF_NAMESPACES GATT Bluetooth Namespaces - * @{ - */ -#define BLE_GATT_CPF_NAMESPACE_BTSIG 0x01 /**< Bluetooth SIG defined Namespace. */ -#define BLE_GATT_CPF_NAMESPACE_DESCRIPTION_UNKNOWN 0x0000 /**< Namespace Description Unknown. */ -/** @} */ - -/** @} */ - -/** @addtogroup BLE_GATT_STRUCTURES Structures - * @{ */ - -/** - * @brief BLE GATT connection configuration parameters, set with @ref sd_ble_cfg_set. - * - * @retval ::NRF_ERROR_INVALID_PARAM att_mtu is smaller than @ref BLE_GATT_ATT_MTU_DEFAULT. - */ -typedef struct -{ - uint16_t att_mtu; /**< Maximum size of ATT packet the SoftDevice can send or receive. - The default and minimum value is @ref BLE_GATT_ATT_MTU_DEFAULT. - @mscs - @mmsc{@ref BLE_GATTC_MTU_EXCHANGE} - @mmsc{@ref BLE_GATTS_MTU_EXCHANGE} - @endmscs - */ -} ble_gatt_conn_cfg_t; - -/**@brief GATT Characteristic Properties. */ -typedef struct -{ - /* Standard properties */ - uint8_t broadcast :1; /**< Broadcasting of the value permitted. */ - uint8_t read :1; /**< Reading the value permitted. */ - uint8_t write_wo_resp :1; /**< Writing the value with Write Command permitted. */ - uint8_t write :1; /**< Writing the value with Write Request permitted. */ - uint8_t notify :1; /**< Notification of the value permitted. */ - uint8_t indicate :1; /**< Indications of the value permitted. */ - uint8_t auth_signed_wr :1; /**< Writing the value with Signed Write Command permitted. */ -} ble_gatt_char_props_t; - -/**@brief GATT Characteristic Extended Properties. */ -typedef struct -{ - /* Extended properties */ - uint8_t reliable_wr :1; /**< Writing the value with Queued Write operations permitted. */ - uint8_t wr_aux :1; /**< Writing the Characteristic User Description descriptor permitted. */ -} ble_gatt_char_ext_props_t; - -/** @} */ - -#ifdef __cplusplus -} -#endif -#endif // BLE_GATT_H__ - -/** @} */ diff --git a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gattc.h b/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gattc.h deleted file mode 100755 index 7fb39202..00000000 --- a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gattc.h +++ /dev/null @@ -1,715 +0,0 @@ -/* - * Copyright (c) 2011 - 2017, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - @addtogroup BLE_GATTC Generic Attribute Profile (GATT) Client - @{ - @brief Definitions and prototypes for the GATT Client interface. - */ - -#ifndef BLE_GATTC_H__ -#define BLE_GATTC_H__ - -#include <stdint.h> -#include "nrf.h" -#include "nrf_svc.h" -#include "nrf_error.h" -#include "ble_ranges.h" -#include "ble_types.h" -#include "ble_err.h" -#include "ble_gatt.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/** @addtogroup BLE_GATTC_ENUMERATIONS Enumerations - * @{ */ - -/**@brief GATTC API SVC numbers. */ -enum BLE_GATTC_SVCS -{ - SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER = BLE_GATTC_SVC_BASE, /**< Primary Service Discovery. */ - SD_BLE_GATTC_RELATIONSHIPS_DISCOVER, /**< Relationship Discovery. */ - SD_BLE_GATTC_CHARACTERISTICS_DISCOVER, /**< Characteristic Discovery. */ - SD_BLE_GATTC_DESCRIPTORS_DISCOVER, /**< Characteristic Descriptor Discovery. */ - SD_BLE_GATTC_ATTR_INFO_DISCOVER, /**< Attribute Information Discovery. */ - SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ, /**< Read Characteristic Value by UUID. */ - SD_BLE_GATTC_READ, /**< Generic read. */ - SD_BLE_GATTC_CHAR_VALUES_READ, /**< Read multiple Characteristic Values. */ - SD_BLE_GATTC_WRITE, /**< Generic write. */ - SD_BLE_GATTC_HV_CONFIRM, /**< Handle Value Confirmation. */ - SD_BLE_GATTC_EXCHANGE_MTU_REQUEST, /**< Exchange MTU Request. */ -}; - -/** - * @brief GATT Client Event IDs. - */ -enum BLE_GATTC_EVTS -{ - BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP = BLE_GATTC_EVT_BASE, /**< Primary Service Discovery Response event. \n See @ref ble_gattc_evt_prim_srvc_disc_rsp_t. */ - BLE_GATTC_EVT_REL_DISC_RSP, /**< Relationship Discovery Response event. \n See @ref ble_gattc_evt_rel_disc_rsp_t. */ - BLE_GATTC_EVT_CHAR_DISC_RSP, /**< Characteristic Discovery Response event. \n See @ref ble_gattc_evt_char_disc_rsp_t. */ - BLE_GATTC_EVT_DESC_DISC_RSP, /**< Descriptor Discovery Response event. \n See @ref ble_gattc_evt_desc_disc_rsp_t. */ - BLE_GATTC_EVT_ATTR_INFO_DISC_RSP, /**< Attribute Information Response event. \n See @ref ble_gattc_evt_attr_info_disc_rsp_t. */ - BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP, /**< Read By UUID Response event. \n See @ref ble_gattc_evt_char_val_by_uuid_read_rsp_t. */ - BLE_GATTC_EVT_READ_RSP, /**< Read Response event. \n See @ref ble_gattc_evt_read_rsp_t. */ - BLE_GATTC_EVT_CHAR_VALS_READ_RSP, /**< Read multiple Response event. \n See @ref ble_gattc_evt_char_vals_read_rsp_t. */ - BLE_GATTC_EVT_WRITE_RSP, /**< Write Response event. \n See @ref ble_gattc_evt_write_rsp_t. */ - BLE_GATTC_EVT_HVX, /**< Handle Value Notification or Indication event. \n Confirm indication with @ref sd_ble_gattc_hv_confirm. \n See @ref ble_gattc_evt_hvx_t. */ - BLE_GATTC_EVT_EXCHANGE_MTU_RSP, /**< Exchange MTU Response event. \n See @ref ble_gattc_evt_exchange_mtu_rsp_t. */ - BLE_GATTC_EVT_TIMEOUT, /**< Timeout event. \n See @ref ble_gattc_evt_timeout_t. */ - BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE /**< Write without Response transmission complete. \n See @ref ble_gattc_evt_write_cmd_tx_complete_t. */ -}; - -/** @} */ - -/** @addtogroup BLE_GATTC_DEFINES Defines - * @{ */ - -/** @defgroup BLE_ERRORS_GATTC SVC return values specific to GATTC - * @{ */ -#define BLE_ERROR_GATTC_PROC_NOT_PERMITTED (NRF_GATTC_ERR_BASE + 0x000) /**< Procedure not Permitted. */ -/** @} */ - -/** @defgroup BLE_GATTC_ATTR_INFO_FORMAT Attribute Information Formats - * @{ */ -#define BLE_GATTC_ATTR_INFO_FORMAT_16BIT 1 /**< 16-bit Attribute Information Format. */ -#define BLE_GATTC_ATTR_INFO_FORMAT_128BIT 2 /**< 128-bit Attribute Information Format. */ -/** @} */ - -/** @defgroup BLE_GATTC_DEFAULTS GATT Client defaults - * @{ */ -#define BLE_GATTC_WRITE_CMD_TX_QUEUE_SIZE_DEFAULT 1 /**< Default number of Write without Response that can be queued for transmission. */ -/** @} */ - -/** @} */ - -/** @addtogroup BLE_GATTC_STRUCTURES Structures - * @{ */ - -/** - * @brief BLE GATTC connection configuration parameters, set with @ref sd_ble_cfg_set. - */ -typedef struct -{ - uint8_t write_cmd_tx_queue_size; /**< The guaranteed minimum number of Write without Response that can be queued for transmission. - The default value is @ref BLE_GATTC_WRITE_CMD_TX_QUEUE_SIZE_DEFAULT */ -} ble_gattc_conn_cfg_t; - -/**@brief Operation Handle Range. */ -typedef struct -{ - uint16_t start_handle; /**< Start Handle. */ - uint16_t end_handle; /**< End Handle. */ -} ble_gattc_handle_range_t; - - -/**@brief GATT service. */ -typedef struct -{ - ble_uuid_t uuid; /**< Service UUID. */ - ble_gattc_handle_range_t handle_range; /**< Service Handle Range. */ -} ble_gattc_service_t; - - -/**@brief GATT include. */ -typedef struct -{ - uint16_t handle; /**< Include Handle. */ - ble_gattc_service_t included_srvc; /**< Handle of the included service. */ -} ble_gattc_include_t; - - -/**@brief GATT characteristic. */ -typedef struct -{ - ble_uuid_t uuid; /**< Characteristic UUID. */ - ble_gatt_char_props_t char_props; /**< Characteristic Properties. */ - uint8_t char_ext_props : 1; /**< Extended properties present. */ - uint16_t handle_decl; /**< Handle of the Characteristic Declaration. */ - uint16_t handle_value; /**< Handle of the Characteristic Value. */ -} ble_gattc_char_t; - - -/**@brief GATT descriptor. */ -typedef struct -{ - uint16_t handle; /**< Descriptor Handle. */ - ble_uuid_t uuid; /**< Descriptor UUID. */ -} ble_gattc_desc_t; - - -/**@brief Write Parameters. */ -typedef struct -{ - uint8_t write_op; /**< Write Operation to be performed, see @ref BLE_GATT_WRITE_OPS. */ - uint8_t flags; /**< Flags, see @ref BLE_GATT_EXEC_WRITE_FLAGS. */ - uint16_t handle; /**< Handle to the attribute to be written. */ - uint16_t offset; /**< Offset in bytes. @note For WRITE_CMD and WRITE_REQ, offset must be 0. */ - uint16_t len; /**< Length of data in bytes. */ - uint8_t const *p_value; /**< Pointer to the value data. */ -} ble_gattc_write_params_t; - -/**@brief Attribute Information for 16-bit Attribute UUID. */ -typedef struct -{ - uint16_t handle; /**< Attribute handle. */ - ble_uuid_t uuid; /**< 16-bit Attribute UUID. */ -} ble_gattc_attr_info16_t; - -/**@brief Attribute Information for 128-bit Attribute UUID. */ -typedef struct -{ - uint16_t handle; /**< Attribute handle. */ - ble_uuid128_t uuid; /**< 128-bit Attribute UUID. */ -} ble_gattc_attr_info128_t; - -/**@brief Event structure for @ref BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP. */ -typedef struct -{ - uint16_t count; /**< Service count. */ - ble_gattc_service_t services[1]; /**< Service data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. - See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ -} ble_gattc_evt_prim_srvc_disc_rsp_t; - -/**@brief Event structure for @ref BLE_GATTC_EVT_REL_DISC_RSP. */ -typedef struct -{ - uint16_t count; /**< Include count. */ - ble_gattc_include_t includes[1]; /**< Include data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. - See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ -} ble_gattc_evt_rel_disc_rsp_t; - -/**@brief Event structure for @ref BLE_GATTC_EVT_CHAR_DISC_RSP. */ -typedef struct -{ - uint16_t count; /**< Characteristic count. */ - ble_gattc_char_t chars[1]; /**< Characteristic data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. - See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ -} ble_gattc_evt_char_disc_rsp_t; - -/**@brief Event structure for @ref BLE_GATTC_EVT_DESC_DISC_RSP. */ -typedef struct -{ - uint16_t count; /**< Descriptor count. */ - ble_gattc_desc_t descs[1]; /**< Descriptor data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. - See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ -} ble_gattc_evt_desc_disc_rsp_t; - -/**@brief Event structure for @ref BLE_GATTC_EVT_ATTR_INFO_DISC_RSP. */ -typedef struct -{ - uint16_t count; /**< Attribute count. */ - uint8_t format; /**< Attribute information format, see @ref BLE_GATTC_ATTR_INFO_FORMAT. */ - union { - ble_gattc_attr_info16_t attr_info16[1]; /**< Attribute information for 16-bit Attribute UUID. - @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. - See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ - ble_gattc_attr_info128_t attr_info128[1]; /**< Attribute information for 128-bit Attribute UUID. - @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. - See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ - } info; /**< Attribute information union. */ -} ble_gattc_evt_attr_info_disc_rsp_t; - -/**@brief GATT read by UUID handle value pair. */ -typedef struct -{ - uint16_t handle; /**< Attribute Handle. */ - uint8_t *p_value; /**< Pointer to the Attribute Value, length is available in @ref ble_gattc_evt_char_val_by_uuid_read_rsp_t::value_len. */ -} ble_gattc_handle_value_t; - -/**@brief Event structure for @ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP. */ -typedef struct -{ - uint16_t count; /**< Handle-Value Pair Count. */ - uint16_t value_len; /**< Length of the value in Handle-Value(s) list. */ - uint8_t handle_value[1]; /**< Handle-Value(s) list. To iterate through the list use @ref sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter. - @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. - See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ -} ble_gattc_evt_char_val_by_uuid_read_rsp_t; - -/**@brief Event structure for @ref BLE_GATTC_EVT_READ_RSP. */ -typedef struct -{ - uint16_t handle; /**< Attribute Handle. */ - uint16_t offset; /**< Offset of the attribute data. */ - uint16_t len; /**< Attribute data length. */ - uint8_t data[1]; /**< Attribute data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. - See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ -} ble_gattc_evt_read_rsp_t; - -/**@brief Event structure for @ref BLE_GATTC_EVT_CHAR_VALS_READ_RSP. */ -typedef struct -{ - uint16_t len; /**< Concatenated Attribute values length. */ - uint8_t values[1]; /**< Attribute values. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. - See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ -} ble_gattc_evt_char_vals_read_rsp_t; - -/**@brief Event structure for @ref BLE_GATTC_EVT_WRITE_RSP. */ -typedef struct -{ - uint16_t handle; /**< Attribute Handle. */ - uint8_t write_op; /**< Type of write operation, see @ref BLE_GATT_WRITE_OPS. */ - uint16_t offset; /**< Data offset. */ - uint16_t len; /**< Data length. */ - uint8_t data[1]; /**< Data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. - See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ -} ble_gattc_evt_write_rsp_t; - -/**@brief Event structure for @ref BLE_GATTC_EVT_HVX. */ -typedef struct -{ - uint16_t handle; /**< Handle to which the HVx operation applies. */ - uint8_t type; /**< Indication or Notification, see @ref BLE_GATT_HVX_TYPES. */ - uint16_t len; /**< Attribute data length. */ - uint8_t data[1]; /**< Attribute data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. - See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ -} ble_gattc_evt_hvx_t; - -/**@brief Event structure for @ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP. */ -typedef struct -{ - uint16_t server_rx_mtu; /**< Server RX MTU size. */ -} ble_gattc_evt_exchange_mtu_rsp_t; - -/**@brief Event structure for @ref BLE_GATTC_EVT_TIMEOUT. */ -typedef struct -{ - uint8_t src; /**< Timeout source, see @ref BLE_GATT_TIMEOUT_SOURCES. */ -} ble_gattc_evt_timeout_t; - -/**@brief Event structure for @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE. */ -typedef struct -{ - uint8_t count; /**< Number of write without response transmissions completed. */ -} ble_gattc_evt_write_cmd_tx_complete_t; - -/**@brief GATTC event structure. */ -typedef struct -{ - uint16_t conn_handle; /**< Connection Handle on which event occurred. */ - uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */ - uint16_t error_handle; /**< In case of error: The handle causing the error. In all other cases @ref BLE_GATT_HANDLE_INVALID. */ - union - { - ble_gattc_evt_prim_srvc_disc_rsp_t prim_srvc_disc_rsp; /**< Primary Service Discovery Response Event Parameters. */ - ble_gattc_evt_rel_disc_rsp_t rel_disc_rsp; /**< Relationship Discovery Response Event Parameters. */ - ble_gattc_evt_char_disc_rsp_t char_disc_rsp; /**< Characteristic Discovery Response Event Parameters. */ - ble_gattc_evt_desc_disc_rsp_t desc_disc_rsp; /**< Descriptor Discovery Response Event Parameters. */ - ble_gattc_evt_char_val_by_uuid_read_rsp_t char_val_by_uuid_read_rsp; /**< Characteristic Value Read by UUID Response Event Parameters. */ - ble_gattc_evt_read_rsp_t read_rsp; /**< Read Response Event Parameters. */ - ble_gattc_evt_char_vals_read_rsp_t char_vals_read_rsp; /**< Characteristic Values Read Response Event Parameters. */ - ble_gattc_evt_write_rsp_t write_rsp; /**< Write Response Event Parameters. */ - ble_gattc_evt_hvx_t hvx; /**< Handle Value Notification/Indication Event Parameters. */ - ble_gattc_evt_exchange_mtu_rsp_t exchange_mtu_rsp; /**< Exchange MTU Response Event Parameters. */ - ble_gattc_evt_timeout_t timeout; /**< Timeout Event Parameters. */ - ble_gattc_evt_attr_info_disc_rsp_t attr_info_disc_rsp; /**< Attribute Information Discovery Event Parameters. */ - ble_gattc_evt_write_cmd_tx_complete_t write_cmd_tx_complete; /**< Write without Response transmission complete Event Parameters. */ - } params; /**< Event Parameters. @note Only valid if @ref gatt_status == @ref BLE_GATT_STATUS_SUCCESS. */ -} ble_gattc_evt_t; -/** @} */ - -/** @addtogroup BLE_GATTC_FUNCTIONS Functions - * @{ */ - -/**@brief Initiate or continue a GATT Primary Service Discovery procedure. - * - * @details This function initiates or resumes a Primary Service discovery procedure, starting from the supplied handle. - * If the last service has not been reached, this function must be called again with an updated start handle value to continue the search. - * - * @note If any of the discovered services have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with - * type @ref BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event. - * - * @events - * @event{@ref BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GATTC_PRIM_SRVC_DISC_MSC} - * @endmscs - * - * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. - * @param[in] start_handle Handle to start searching from. - * @param[in] p_srvc_uuid Pointer to the service UUID to be found. If it is NULL, all primary services will be returned. - * - * @retval ::NRF_SUCCESS Successfully started or resumed the Primary Service Discovery procedure. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. - * @retval ::NRF_ERROR_BUSY Client procedure already in progress. - * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. - */ -SVCALL(SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER, uint32_t, sd_ble_gattc_primary_services_discover(uint16_t conn_handle, uint16_t start_handle, ble_uuid_t const *p_srvc_uuid)); - - -/**@brief Initiate or continue a GATT Relationship Discovery procedure. - * - * @details This function initiates or resumes the Find Included Services sub-procedure. If the last included service has not been reached, - * this must be called again with an updated handle range to continue the search. - * - * @events - * @event{@ref BLE_GATTC_EVT_REL_DISC_RSP} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GATTC_REL_DISC_MSC} - * @endmscs - * - * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. - * @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on. - * - * @retval ::NRF_SUCCESS Successfully started or resumed the Relationship Discovery procedure. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. - * @retval ::NRF_ERROR_BUSY Client procedure already in progress. - * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. - */ -SVCALL(SD_BLE_GATTC_RELATIONSHIPS_DISCOVER, uint32_t, sd_ble_gattc_relationships_discover(uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range)); - - -/**@brief Initiate or continue a GATT Characteristic Discovery procedure. - * - * @details This function initiates or resumes a Characteristic discovery procedure. If the last Characteristic has not been reached, - * this must be called again with an updated handle range to continue the discovery. - * - * @note If any of the discovered characteristics have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with - * type @ref BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event. - * - * @events - * @event{@ref BLE_GATTC_EVT_CHAR_DISC_RSP} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GATTC_CHAR_DISC_MSC} - * @endmscs - * - * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. - * @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on. - * - * @retval ::NRF_SUCCESS Successfully started or resumed the Characteristic Discovery procedure. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_BUSY Client procedure already in progress. - * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. - */ -SVCALL(SD_BLE_GATTC_CHARACTERISTICS_DISCOVER, uint32_t, sd_ble_gattc_characteristics_discover(uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range)); - - -/**@brief Initiate or continue a GATT Characteristic Descriptor Discovery procedure. - * - * @details This function initiates or resumes a Characteristic Descriptor discovery procedure. If the last Descriptor has not been reached, - * this must be called again with an updated handle range to continue the discovery. - * - * @events - * @event{@ref BLE_GATTC_EVT_DESC_DISC_RSP} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GATTC_DESC_DISC_MSC} - * @endmscs - * - * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. - * @param[in] p_handle_range A pointer to the range of handles of the Characteristic to perform this procedure on. - * - * @retval ::NRF_SUCCESS Successfully started or resumed the Descriptor Discovery procedure. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_BUSY Client procedure already in progress. - * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. - */ -SVCALL(SD_BLE_GATTC_DESCRIPTORS_DISCOVER, uint32_t, sd_ble_gattc_descriptors_discover(uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range)); - - -/**@brief Initiate or continue a GATT Read using Characteristic UUID procedure. - * - * @details This function initiates or resumes a Read using Characteristic UUID procedure. If the last Characteristic has not been reached, - * this must be called again with an updated handle range to continue the discovery. - * - * @events - * @event{@ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GATTC_READ_UUID_MSC} - * @endmscs - * - * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. - * @param[in] p_uuid Pointer to a Characteristic value UUID to read. - * @param[in] p_handle_range A pointer to the range of handles to perform this procedure on. - * - * @retval ::NRF_SUCCESS Successfully started or resumed the Read using Characteristic UUID procedure. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_BUSY Client procedure already in progress. - * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. - */ -SVCALL(SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ, uint32_t, sd_ble_gattc_char_value_by_uuid_read(uint16_t conn_handle, ble_uuid_t const *p_uuid, ble_gattc_handle_range_t const *p_handle_range)); - - -/**@brief Initiate or continue a GATT Read (Long) Characteristic or Descriptor procedure. - * - * @details This function initiates or resumes a GATT Read (Long) Characteristic or Descriptor procedure. If the Characteristic or Descriptor - * to be read is longer than ATT_MTU - 1, this function must be called multiple times with appropriate offset to read the - * complete value. - * - * @events - * @event{@ref BLE_GATTC_EVT_READ_RSP} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GATTC_VALUE_READ_MSC} - * @endmscs - * - * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. - * @param[in] handle The handle of the attribute to be read. - * @param[in] offset Offset into the attribute value to be read. - * - * @retval ::NRF_SUCCESS Successfully started or resumed the Read (Long) procedure. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. - * @retval ::NRF_ERROR_BUSY Client procedure already in progress. - * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. - */ -SVCALL(SD_BLE_GATTC_READ, uint32_t, sd_ble_gattc_read(uint16_t conn_handle, uint16_t handle, uint16_t offset)); - - -/**@brief Initiate a GATT Read Multiple Characteristic Values procedure. - * - * @details This function initiates a GATT Read Multiple Characteristic Values procedure. - * - * @events - * @event{@ref BLE_GATTC_EVT_CHAR_VALS_READ_RSP} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GATTC_READ_MULT_MSC} - * @endmscs - * - * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. - * @param[in] p_handles A pointer to the handle(s) of the attribute(s) to be read. - * @param[in] handle_count The number of handles in p_handles. - * - * @retval ::NRF_SUCCESS Successfully started the Read Multiple Characteristic Values procedure. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_BUSY Client procedure already in progress. - * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. - */ -SVCALL(SD_BLE_GATTC_CHAR_VALUES_READ, uint32_t, sd_ble_gattc_char_values_read(uint16_t conn_handle, uint16_t const *p_handles, uint16_t handle_count)); - - -/**@brief Perform a Write (Characteristic Value or Descriptor, with or without response, signed or not, long or reliable) procedure. - * - * @details This function can perform all write procedures described in GATT. - * - * @note Only one write with response procedure can be ongoing per connection at a time. - * If the application tries to write with response while another write with response procedure is ongoing, - * the function call will return @ref NRF_ERROR_BUSY. - * A @ref BLE_GATTC_EVT_WRITE_RSP event will be issued as soon as the write response arrives from the peer. - * - * @note The number of Write without Response that can be queued is configured by @ref ble_gattc_conn_cfg_t::write_cmd_tx_queue_size - * When the queue is full, the function call will return @ref NRF_ERROR_RESOURCES. - * A @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event will be issued as soon as the transmission of the write without response is complete. - * - * @note The application can keep track of the available queue element count for writes without responses by following the procedure below: - * - Store initial queue element count in a variable. - * - Decrement the variable, which stores the currently available queue element count, by one when a call to this function returns @ref NRF_SUCCESS. - * - Increment the variable, which stores the current available queue element count, by the count variable in @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event. - * - * @events - * @event{@ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE, Write without response transmission complete.} - * @event{@ref BLE_GATTC_EVT_WRITE_RSP, Write response received from the peer.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GATTC_VALUE_WRITE_WITHOUT_RESP_MSC} - * @mmsc{@ref BLE_GATTC_VALUE_WRITE_MSC} - * @mmsc{@ref BLE_GATTC_VALUE_LONG_WRITE_MSC} - * @mmsc{@ref BLE_GATTC_VALUE_RELIABLE_WRITE_MSC} - * @endmscs - * - * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. - * @param[in] p_write_params A pointer to a write parameters structure. - * - * @retval ::NRF_SUCCESS Successfully started the Write procedure. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. - * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied. - * @retval ::NRF_ERROR_BUSY For write with response, procedure already in progress. Wait for a @ref BLE_GATTC_EVT_WRITE_RSP event and retry. - * @retval ::NRF_ERROR_RESOURCES Too many writes without responses queued. - * Wait for a @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event and retry. - * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. - */ -SVCALL(SD_BLE_GATTC_WRITE, uint32_t, sd_ble_gattc_write(uint16_t conn_handle, ble_gattc_write_params_t const *p_write_params)); - - -/**@brief Send a Handle Value Confirmation to the GATT Server. - * - * @mscs - * @mmsc{@ref BLE_GATTC_HVI_MSC} - * @endmscs - * - * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. - * @param[in] handle The handle of the attribute in the indication. - * - * @retval ::NRF_SUCCESS Successfully queued the Handle Value Confirmation for transmission. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State or no Indication pending to be confirmed. - * @retval ::BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle. - * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. - */ -SVCALL(SD_BLE_GATTC_HV_CONFIRM, uint32_t, sd_ble_gattc_hv_confirm(uint16_t conn_handle, uint16_t handle)); - -/**@brief Discovers information about a range of attributes on a GATT server. - * - * @events - * @event{@ref BLE_GATTC_EVT_ATTR_INFO_DISC_RSP, Generated when information about a range of attributes has been received.} - * @endevents - * - * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. - * @param[in] p_handle_range The range of handles to request information about. - * - * @retval ::NRF_SUCCESS Successfully started an attribute information discovery procedure. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle. - * @retval ::NRF_ERROR_INVALID_STATE Invalid connection state - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_BUSY Client procedure already in progress. - * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. - */ -SVCALL(SD_BLE_GATTC_ATTR_INFO_DISCOVER, uint32_t, sd_ble_gattc_attr_info_discover(uint16_t conn_handle, ble_gattc_handle_range_t const * p_handle_range)); - -/**@brief Start an ATT_MTU exchange by sending an Exchange MTU Request to the server. - * - * @details The SoftDevice sets ATT_MTU to the minimum of: - * - The Client RX MTU value, and - * - The Server RX MTU value from @ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP. - * - * However, the SoftDevice never sets ATT_MTU lower than @ref BLE_GATT_ATT_MTU_DEFAULT. - * - * @events - * @event{@ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GATTC_MTU_EXCHANGE} - * @endmscs - * - * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. - * @param[in] client_rx_mtu Client RX MTU size. - * - The minimum value is @ref BLE_GATT_ATT_MTU_DEFAULT. - * - The maximum value is @ref ble_gatt_conn_cfg_t::att_mtu in the connection configuration - used for this connection. - * - The value must be equal to Server RX MTU size given in @ref sd_ble_gatts_exchange_mtu_reply - * if an ATT_MTU exchange has already been performed in the other direction. - * - * @retval ::NRF_SUCCESS Successfully sent request to the server. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle. - * @retval ::NRF_ERROR_INVALID_STATE Invalid connection state or an ATT_MTU exchange was already requested once. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid Client RX MTU size supplied. - * @retval ::NRF_ERROR_BUSY Client procedure already in progress. - * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. - */ -SVCALL(SD_BLE_GATTC_EXCHANGE_MTU_REQUEST, uint32_t, sd_ble_gattc_exchange_mtu_request(uint16_t conn_handle, uint16_t client_rx_mtu)); - -/**@brief Iterate through Handle-Value(s) list in @ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP event. - * - * @param[in] p_gattc_evt Pointer to event buffer containing @ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP event. - * @note If the buffer contains different event, behavior is undefined. - * @param[in,out] p_iter Iterator, points to @ref ble_gattc_handle_value_t structure that will be filled in with - * the next Handle-Value pair in each iteration. If the function returns other than - * @ref NRF_SUCCESS, it will not be changed. - * - To start iteration, initialize the structure to zero. - * - To continue, pass the value from previous iteration. - * - * \code - * ble_gattc_handle_value_t iter; - * memset(&iter, 0, sizeof(ble_gattc_handle_value_t)); - * while (sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter(&ble_evt.evt.gattc_evt, &iter) == NRF_SUCCESS) - * { - * app_handle = iter.handle; - * memcpy(app_value, iter.p_value, ble_evt.evt.gattc_evt.params.char_val_by_uuid_read_rsp.value_len); - * } - * \endcode - * - * @retval ::NRF_SUCCESS Successfully retrieved the next Handle-Value pair. - * @retval ::NRF_ERROR_NOT_FOUND No more Handle-Value pairs available in the list. - */ -__STATIC_INLINE uint32_t sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter(ble_gattc_evt_t *p_gattc_evt, ble_gattc_handle_value_t *p_iter); - -/** @} */ - -#ifndef SUPPRESS_INLINE_IMPLEMENTATION - -__STATIC_INLINE uint32_t sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter(ble_gattc_evt_t *p_gattc_evt, ble_gattc_handle_value_t *p_iter) -{ - uint32_t value_len = p_gattc_evt->params.char_val_by_uuid_read_rsp.value_len; - uint8_t *p_first = p_gattc_evt->params.char_val_by_uuid_read_rsp.handle_value; - uint8_t *p_next = p_iter->p_value ? p_iter->p_value + value_len : p_first; - - if ((p_next - p_first) / (sizeof(uint16_t) + value_len) < p_gattc_evt->params.char_val_by_uuid_read_rsp.count) - { - p_iter->handle = (uint16_t)p_next[1] << 8 | p_next[0]; - p_iter->p_value = p_next + sizeof(uint16_t); - return NRF_SUCCESS; - } - else - { - return NRF_ERROR_NOT_FOUND; - } -} - -#endif /* SUPPRESS_INLINE_IMPLEMENTATION */ - -#ifdef __cplusplus -} -#endif -#endif /* BLE_GATTC_H__ */ - -/** - @} -*/ diff --git a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gatts.h b/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gatts.h deleted file mode 100755 index 394d8d18..00000000 --- a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gatts.h +++ /dev/null @@ -1,845 +0,0 @@ -/* - * Copyright (c) 2011 - 2018, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - @addtogroup BLE_GATTS Generic Attribute Profile (GATT) Server - @{ - @brief Definitions and prototypes for the GATTS interface. - */ - -#ifndef BLE_GATTS_H__ -#define BLE_GATTS_H__ - -#include <stdint.h> -#include "nrf_svc.h" -#include "nrf_error.h" -#include "ble_hci.h" -#include "ble_ranges.h" -#include "ble_types.h" -#include "ble_err.h" -#include "ble_gatt.h" -#include "ble_gap.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/** @addtogroup BLE_GATTS_ENUMERATIONS Enumerations - * @{ */ - -/** - * @brief GATTS API SVC numbers. - */ -enum BLE_GATTS_SVCS -{ - SD_BLE_GATTS_SERVICE_ADD = BLE_GATTS_SVC_BASE, /**< Add a service. */ - SD_BLE_GATTS_INCLUDE_ADD, /**< Add an included service. */ - SD_BLE_GATTS_CHARACTERISTIC_ADD, /**< Add a characteristic. */ - SD_BLE_GATTS_DESCRIPTOR_ADD, /**< Add a generic attribute. */ - SD_BLE_GATTS_VALUE_SET, /**< Set an attribute value. */ - SD_BLE_GATTS_VALUE_GET, /**< Get an attribute value. */ - SD_BLE_GATTS_HVX, /**< Handle Value Notification or Indication. */ - SD_BLE_GATTS_SERVICE_CHANGED, /**< Perform a Service Changed Indication to one or more peers. */ - SD_BLE_GATTS_RW_AUTHORIZE_REPLY, /**< Reply to an authorization request for a read or write operation on one or more attributes. */ - SD_BLE_GATTS_SYS_ATTR_SET, /**< Set the persistent system attributes for a connection. */ - SD_BLE_GATTS_SYS_ATTR_GET, /**< Retrieve the persistent system attributes. */ - SD_BLE_GATTS_INITIAL_USER_HANDLE_GET, /**< Retrieve the first valid user handle. */ - SD_BLE_GATTS_ATTR_GET, /**< Retrieve the UUID and/or metadata of an attribute. */ - SD_BLE_GATTS_EXCHANGE_MTU_REPLY /**< Reply to Exchange MTU Request. */ -}; - -/** - * @brief GATT Server Event IDs. - */ -enum BLE_GATTS_EVTS -{ - BLE_GATTS_EVT_WRITE = BLE_GATTS_EVT_BASE, /**< Write operation performed. \n See @ref ble_gatts_evt_write_t. */ - BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST, /**< Read/Write Authorization request. \n Reply with @ref sd_ble_gatts_rw_authorize_reply. \n See @ref ble_gatts_evt_rw_authorize_request_t. */ - BLE_GATTS_EVT_SYS_ATTR_MISSING, /**< A persistent system attribute access is pending. \n Respond with @ref sd_ble_gatts_sys_attr_set. \n See @ref ble_gatts_evt_sys_attr_missing_t. */ - BLE_GATTS_EVT_HVC, /**< Handle Value Confirmation. \n See @ref ble_gatts_evt_hvc_t. */ - BLE_GATTS_EVT_SC_CONFIRM, /**< Service Changed Confirmation. \n No additional event structure applies. */ - BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST, /**< Exchange MTU Request. \n Reply with @ref sd_ble_gatts_exchange_mtu_reply. \n See @ref ble_gatts_evt_exchange_mtu_request_t. */ - BLE_GATTS_EVT_TIMEOUT, /**< Peer failed to respond to an ATT request in time. \n See @ref ble_gatts_evt_timeout_t. */ - BLE_GATTS_EVT_HVN_TX_COMPLETE /**< Handle Value Notification transmission complete. \n See @ref ble_gatts_evt_hvn_tx_complete_t. */ -}; - -/**@brief GATTS Configuration IDs. - * - * IDs that uniquely identify a GATTS configuration. - */ -enum BLE_GATTS_CFGS -{ - BLE_GATTS_CFG_SERVICE_CHANGED = BLE_GATTS_CFG_BASE, /**< Service changed configuration. */ - BLE_GATTS_CFG_ATTR_TAB_SIZE, /**< Attribute table size configuration. */ -}; - -/** @} */ - -/** @addtogroup BLE_GATTS_DEFINES Defines - * @{ */ - -/** @defgroup BLE_ERRORS_GATTS SVC return values specific to GATTS - * @{ */ -#define BLE_ERROR_GATTS_INVALID_ATTR_TYPE (NRF_GATTS_ERR_BASE + 0x000) /**< Invalid attribute type. */ -#define BLE_ERROR_GATTS_SYS_ATTR_MISSING (NRF_GATTS_ERR_BASE + 0x001) /**< System Attributes missing. */ -/** @} */ - -/** @defgroup BLE_GATTS_ATTR_LENS_MAX Maximum attribute lengths - * @{ */ -#define BLE_GATTS_FIX_ATTR_LEN_MAX (510) /**< Maximum length for fixed length Attribute Values. */ -#define BLE_GATTS_VAR_ATTR_LEN_MAX (512) /**< Maximum length for variable length Attribute Values. */ -/** @} */ - -/** @defgroup BLE_GATTS_SRVC_TYPES GATT Server Service Types - * @{ */ -#define BLE_GATTS_SRVC_TYPE_INVALID 0x00 /**< Invalid Service Type. */ -#define BLE_GATTS_SRVC_TYPE_PRIMARY 0x01 /**< Primary Service. */ -#define BLE_GATTS_SRVC_TYPE_SECONDARY 0x02 /**< Secondary Type. */ -/** @} */ - - -/** @defgroup BLE_GATTS_ATTR_TYPES GATT Server Attribute Types - * @{ */ -#define BLE_GATTS_ATTR_TYPE_INVALID 0x00 /**< Invalid Attribute Type. */ -#define BLE_GATTS_ATTR_TYPE_PRIM_SRVC_DECL 0x01 /**< Primary Service Declaration. */ -#define BLE_GATTS_ATTR_TYPE_SEC_SRVC_DECL 0x02 /**< Secondary Service Declaration. */ -#define BLE_GATTS_ATTR_TYPE_INC_DECL 0x03 /**< Include Declaration. */ -#define BLE_GATTS_ATTR_TYPE_CHAR_DECL 0x04 /**< Characteristic Declaration. */ -#define BLE_GATTS_ATTR_TYPE_CHAR_VAL 0x05 /**< Characteristic Value. */ -#define BLE_GATTS_ATTR_TYPE_DESC 0x06 /**< Descriptor. */ -#define BLE_GATTS_ATTR_TYPE_OTHER 0x07 /**< Other, non-GATT specific type. */ -/** @} */ - - -/** @defgroup BLE_GATTS_OPS GATT Server Operations - * @{ */ -#define BLE_GATTS_OP_INVALID 0x00 /**< Invalid Operation. */ -#define BLE_GATTS_OP_WRITE_REQ 0x01 /**< Write Request. */ -#define BLE_GATTS_OP_WRITE_CMD 0x02 /**< Write Command. */ -#define BLE_GATTS_OP_SIGN_WRITE_CMD 0x03 /**< Signed Write Command. */ -#define BLE_GATTS_OP_PREP_WRITE_REQ 0x04 /**< Prepare Write Request. */ -#define BLE_GATTS_OP_EXEC_WRITE_REQ_CANCEL 0x05 /**< Execute Write Request: Cancel all prepared writes. */ -#define BLE_GATTS_OP_EXEC_WRITE_REQ_NOW 0x06 /**< Execute Write Request: Immediately execute all prepared writes. */ -/** @} */ - -/** @defgroup BLE_GATTS_VLOCS GATT Value Locations - * @{ */ -#define BLE_GATTS_VLOC_INVALID 0x00 /**< Invalid Location. */ -#define BLE_GATTS_VLOC_STACK 0x01 /**< Attribute Value is located in stack memory, no user memory is required. */ -#define BLE_GATTS_VLOC_USER 0x02 /**< Attribute Value is located in user memory. This requires the user to maintain a valid buffer through the lifetime of the attribute, since the stack - will read and write directly to the memory using the pointer provided in the APIs. There are no alignment requirements for the buffer. */ -/** @} */ - -/** @defgroup BLE_GATTS_AUTHORIZE_TYPES GATT Server Authorization Types - * @{ */ -#define BLE_GATTS_AUTHORIZE_TYPE_INVALID 0x00 /**< Invalid Type. */ -#define BLE_GATTS_AUTHORIZE_TYPE_READ 0x01 /**< Authorize a Read Operation. */ -#define BLE_GATTS_AUTHORIZE_TYPE_WRITE 0x02 /**< Authorize a Write Request Operation. */ -/** @} */ - -/** @defgroup BLE_GATTS_SYS_ATTR_FLAGS System Attribute Flags - * @{ */ -#define BLE_GATTS_SYS_ATTR_FLAG_SYS_SRVCS (1 << 0) /**< Restrict system attributes to system services only. */ -#define BLE_GATTS_SYS_ATTR_FLAG_USR_SRVCS (1 << 1) /**< Restrict system attributes to user services only. */ -/** @} */ - -/** @defgroup BLE_GATTS_SERVICE_CHANGED Service Changed Inclusion Values - * @{ - */ -#define BLE_GATTS_SERVICE_CHANGED_DEFAULT (1) /**< Default is to include the Service Changed characteristic in the Attribute Table. */ -/** @} */ - -/** @defgroup BLE_GATTS_ATTR_TAB_SIZE Attribute Table size - * @{ - */ -#define BLE_GATTS_ATTR_TAB_SIZE_MIN (248) /**< Minimum Attribute Table size */ -#define BLE_GATTS_ATTR_TAB_SIZE_DEFAULT (1408) /**< Default Attribute Table size. */ -/** @} */ - -/** @defgroup BLE_GATTS_DEFAULTS GATT Server defaults - * @{ - */ -#define BLE_GATTS_HVN_TX_QUEUE_SIZE_DEFAULT 1 /**< Default number of Handle Value Notifications that can be queued for transmission. */ -/** @} */ - -/** @} */ - -/** @addtogroup BLE_GATTS_STRUCTURES Structures - * @{ */ - -/** - * @brief BLE GATTS connection configuration parameters, set with @ref sd_ble_cfg_set. - */ -typedef struct -{ - uint8_t hvn_tx_queue_size; /**< Minimum guaranteed number of Handle Value Notifications that can be queued for transmission. - The default value is @ref BLE_GATTS_HVN_TX_QUEUE_SIZE_DEFAULT */ -} ble_gatts_conn_cfg_t; - -/**@brief Attribute metadata. */ -typedef struct -{ - ble_gap_conn_sec_mode_t read_perm; /**< Read permissions. */ - ble_gap_conn_sec_mode_t write_perm; /**< Write permissions. */ - uint8_t vlen :1; /**< Variable length attribute. */ - uint8_t vloc :2; /**< Value location, see @ref BLE_GATTS_VLOCS.*/ - uint8_t rd_auth :1; /**< Read authorization and value will be requested from the application on every read operation. */ - uint8_t wr_auth :1; /**< Write authorization will be requested from the application on every Write Request operation (but not Write Command). */ -} ble_gatts_attr_md_t; - - -/**@brief GATT Attribute. */ -typedef struct -{ - ble_uuid_t const *p_uuid; /**< Pointer to the attribute UUID. */ - ble_gatts_attr_md_t const *p_attr_md; /**< Pointer to the attribute metadata structure. */ - uint16_t init_len; /**< Initial attribute value length in bytes. */ - uint16_t init_offs; /**< Initial attribute value offset in bytes. If different from zero, the first init_offs bytes of the attribute value will be left uninitialized. */ - uint16_t max_len; /**< Maximum attribute value length in bytes, see @ref BLE_GATTS_ATTR_LENS_MAX for maximum values. */ - uint8_t *p_value; /**< Pointer to the attribute data. Please note that if the @ref BLE_GATTS_VLOC_USER value location is selected in the attribute metadata, this will have to point to a buffer - that remains valid through the lifetime of the attribute. This excludes usage of automatic variables that may go out of scope or any other temporary location. - The stack may access that memory directly without the application's knowledge. For writable characteristics, this value must not be a location in flash memory.*/ -} ble_gatts_attr_t; - -/**@brief GATT Attribute Value. */ -typedef struct -{ - uint16_t len; /**< Length in bytes to be written or read. Length in bytes written or read after successful return.*/ - uint16_t offset; /**< Attribute value offset. */ - uint8_t *p_value; /**< Pointer to where value is stored or will be stored. - If value is stored in user memory, only the attribute length is updated when p_value == NULL. - Set to NULL when reading to obtain the complete length of the attribute value */ -} ble_gatts_value_t; - - -/**@brief GATT Characteristic Presentation Format. */ -typedef struct -{ - uint8_t format; /**< Format of the value, see @ref BLE_GATT_CPF_FORMATS. */ - int8_t exponent; /**< Exponent for integer data types. */ - uint16_t unit; /**< Unit from Bluetooth Assigned Numbers. */ - uint8_t name_space; /**< Namespace from Bluetooth Assigned Numbers, see @ref BLE_GATT_CPF_NAMESPACES. */ - uint16_t desc; /**< Namespace description from Bluetooth Assigned Numbers, see @ref BLE_GATT_CPF_NAMESPACES. */ -} ble_gatts_char_pf_t; - - -/**@brief GATT Characteristic metadata. */ -typedef struct -{ - ble_gatt_char_props_t char_props; /**< Characteristic Properties. */ - ble_gatt_char_ext_props_t char_ext_props; /**< Characteristic Extended Properties. */ - uint8_t const *p_char_user_desc; /**< Pointer to a UTF-8 encoded string (non-NULL terminated), NULL if the descriptor is not required. */ - uint16_t char_user_desc_max_size; /**< The maximum size in bytes of the user description descriptor. */ - uint16_t char_user_desc_size; /**< The size of the user description, must be smaller or equal to char_user_desc_max_size. */ - ble_gatts_char_pf_t const *p_char_pf; /**< Pointer to a presentation format structure or NULL if the CPF descriptor is not required. */ - ble_gatts_attr_md_t const *p_user_desc_md; /**< Attribute metadata for the User Description descriptor, or NULL for default values. */ - ble_gatts_attr_md_t const *p_cccd_md; /**< Attribute metadata for the Client Characteristic Configuration Descriptor, or NULL for default values. */ - ble_gatts_attr_md_t const *p_sccd_md; /**< Attribute metadata for the Server Characteristic Configuration Descriptor, or NULL for default values. */ -} ble_gatts_char_md_t; - - -/**@brief GATT Characteristic Definition Handles. */ -typedef struct -{ - uint16_t value_handle; /**< Handle to the characteristic value. */ - uint16_t user_desc_handle; /**< Handle to the User Description descriptor, or @ref BLE_GATT_HANDLE_INVALID if not present. */ - uint16_t cccd_handle; /**< Handle to the Client Characteristic Configuration Descriptor, or @ref BLE_GATT_HANDLE_INVALID if not present. */ - uint16_t sccd_handle; /**< Handle to the Server Characteristic Configuration Descriptor, or @ref BLE_GATT_HANDLE_INVALID if not present. */ -} ble_gatts_char_handles_t; - - -/**@brief GATT HVx parameters. */ -typedef struct -{ - uint16_t handle; /**< Characteristic Value Handle. */ - uint8_t type; /**< Indication or Notification, see @ref BLE_GATT_HVX_TYPES. */ - uint16_t offset; /**< Offset within the attribute value. */ - uint16_t *p_len; /**< Length in bytes to be written, length in bytes written after return. */ - uint8_t const *p_data; /**< Actual data content, use NULL to use the current attribute value. */ -} ble_gatts_hvx_params_t; - -/**@brief GATT Authorization parameters. */ -typedef struct -{ - uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */ - uint8_t update : 1; /**< If set, data supplied in p_data will be used to update the attribute value. - Please note that for @ref BLE_GATTS_AUTHORIZE_TYPE_WRITE operations this bit must always be set, - as the data to be written needs to be stored and later provided by the application. */ - uint16_t offset; /**< Offset of the attribute value being updated. */ - uint16_t len; /**< Length in bytes of the value in p_data pointer, see @ref BLE_GATTS_ATTR_LENS_MAX. */ - uint8_t const *p_data; /**< Pointer to new value used to update the attribute value. */ -} ble_gatts_authorize_params_t; - -/**@brief GATT Read or Write Authorize Reply parameters. */ -typedef struct -{ - uint8_t type; /**< Type of authorize operation, see @ref BLE_GATTS_AUTHORIZE_TYPES. */ - union { - ble_gatts_authorize_params_t read; /**< Read authorization parameters. */ - ble_gatts_authorize_params_t write; /**< Write authorization parameters. */ - } params; /**< Reply Parameters. */ -} ble_gatts_rw_authorize_reply_params_t; - -/**@brief Service Changed Inclusion configuration parameters, set with @ref sd_ble_cfg_set. */ -typedef struct -{ - uint8_t service_changed : 1; /**< If 1, include the Service Changed characteristic in the Attribute Table. Default is @ref BLE_GATTS_SERVICE_CHANGED_DEFAULT. */ -} ble_gatts_cfg_service_changed_t; - -/**@brief Attribute table size configuration parameters, set with @ref sd_ble_cfg_set. - * - * @retval ::NRF_ERROR_INVALID_LENGTH One or more of the following is true: - * - The specified Attribute Table size is too small. - * The minimum acceptable size is defined by @ref BLE_GATTS_ATTR_TAB_SIZE_MIN. - * - The specified Attribute Table size is not a multiple of 4. - */ -typedef struct -{ - uint32_t attr_tab_size; /**< Attribute table size. Default is @ref BLE_GATTS_ATTR_TAB_SIZE_DEFAULT, minimum is @ref BLE_GATTS_ATTR_TAB_SIZE_MIN. */ -} ble_gatts_cfg_attr_tab_size_t; - -/**@brief Config structure for GATTS configurations. */ -typedef union -{ - ble_gatts_cfg_service_changed_t service_changed; /**< Include service changed characteristic, cfg_id is @ref BLE_GATTS_CFG_SERVICE_CHANGED. */ - ble_gatts_cfg_attr_tab_size_t attr_tab_size; /**< Attribute table size, cfg_id is @ref BLE_GATTS_CFG_ATTR_TAB_SIZE. */ -} ble_gatts_cfg_t; - - -/**@brief Event structure for @ref BLE_GATTS_EVT_WRITE. */ -typedef struct -{ - uint16_t handle; /**< Attribute Handle. */ - ble_uuid_t uuid; /**< Attribute UUID. */ - uint8_t op; /**< Type of write operation, see @ref BLE_GATTS_OPS. */ - uint8_t auth_required; /**< Writing operation deferred due to authorization requirement. Application may use @ref sd_ble_gatts_value_set to finalize the writing operation. */ - uint16_t offset; /**< Offset for the write operation. */ - uint16_t len; /**< Length of the received data. */ - uint8_t data[1]; /**< Received data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation. - See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */ -} ble_gatts_evt_write_t; - -/**@brief Event substructure for authorized read requests, see @ref ble_gatts_evt_rw_authorize_request_t. */ -typedef struct -{ - uint16_t handle; /**< Attribute Handle. */ - ble_uuid_t uuid; /**< Attribute UUID. */ - uint16_t offset; /**< Offset for the read operation. */ -} ble_gatts_evt_read_t; - -/**@brief Event structure for @ref BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST. */ -typedef struct -{ - uint8_t type; /**< Type of authorize operation, see @ref BLE_GATTS_AUTHORIZE_TYPES. */ - union { - ble_gatts_evt_read_t read; /**< Attribute Read Parameters. */ - ble_gatts_evt_write_t write; /**< Attribute Write Parameters. */ - } request; /**< Request Parameters. */ -} ble_gatts_evt_rw_authorize_request_t; - -/**@brief Event structure for @ref BLE_GATTS_EVT_SYS_ATTR_MISSING. */ -typedef struct -{ - uint8_t hint; /**< Hint (currently unused). */ -} ble_gatts_evt_sys_attr_missing_t; - - -/**@brief Event structure for @ref BLE_GATTS_EVT_HVC. */ -typedef struct -{ - uint16_t handle; /**< Attribute Handle. */ -} ble_gatts_evt_hvc_t; - -/**@brief Event structure for @ref BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST. */ -typedef struct -{ - uint16_t client_rx_mtu; /**< Client RX MTU size. */ -} ble_gatts_evt_exchange_mtu_request_t; - -/**@brief Event structure for @ref BLE_GATTS_EVT_TIMEOUT. */ -typedef struct -{ - uint8_t src; /**< Timeout source, see @ref BLE_GATT_TIMEOUT_SOURCES. */ -} ble_gatts_evt_timeout_t; - -/**@brief Event structure for @ref BLE_GATTS_EVT_HVN_TX_COMPLETE. */ -typedef struct -{ - uint8_t count; /**< Number of notification transmissions completed. */ -} ble_gatts_evt_hvn_tx_complete_t; - -/**@brief GATTS event structure. */ -typedef struct -{ - uint16_t conn_handle; /**< Connection Handle on which the event occurred. */ - union - { - ble_gatts_evt_write_t write; /**< Write Event Parameters. */ - ble_gatts_evt_rw_authorize_request_t authorize_request; /**< Read or Write Authorize Request Parameters. */ - ble_gatts_evt_sys_attr_missing_t sys_attr_missing; /**< System attributes missing. */ - ble_gatts_evt_hvc_t hvc; /**< Handle Value Confirmation Event Parameters. */ - ble_gatts_evt_exchange_mtu_request_t exchange_mtu_request; /**< Exchange MTU Request Event Parameters. */ - ble_gatts_evt_timeout_t timeout; /**< Timeout Event. */ - ble_gatts_evt_hvn_tx_complete_t hvn_tx_complete; /**< Handle Value Notification transmission complete Event Parameters. */ - } params; /**< Event Parameters. */ -} ble_gatts_evt_t; - -/** @} */ - -/** @addtogroup BLE_GATTS_FUNCTIONS Functions - * @{ */ - -/**@brief Add a service declaration to the Attribute Table. - * - * @note Secondary Services are only relevant in the context of the entity that references them, it is therefore forbidden to - * add a secondary service declaration that is not referenced by another service later in the Attribute Table. - * - * @mscs - * @mmsc{@ref BLE_GATTS_ATT_TABLE_POP_MSC} - * @endmscs - * - * @param[in] type Toggles between primary and secondary services, see @ref BLE_GATTS_SRVC_TYPES. - * @param[in] p_uuid Pointer to service UUID. - * @param[out] p_handle Pointer to a 16-bit word where the assigned handle will be stored. - * - * @retval ::NRF_SUCCESS Successfully added a service declaration. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, Vendor Specific UUIDs need to be present in the table. - * @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack. - * @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation. - */ -SVCALL(SD_BLE_GATTS_SERVICE_ADD, uint32_t, sd_ble_gatts_service_add(uint8_t type, ble_uuid_t const *p_uuid, uint16_t *p_handle)); - - -/**@brief Add an include declaration to the Attribute Table. - * - * @note It is currently only possible to add an include declaration to the last added service (i.e. only sequential population is supported at this time). - * - * @note The included service must already be present in the Attribute Table prior to this call. - * - * @mscs - * @mmsc{@ref BLE_GATTS_ATT_TABLE_POP_MSC} - * @endmscs - * - * @param[in] service_handle Handle of the service where the included service is to be placed, if @ref BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially. - * @param[in] inc_srvc_handle Handle of the included service. - * @param[out] p_include_handle Pointer to a 16-bit word where the assigned handle will be stored. - * - * @retval ::NRF_SUCCESS Successfully added an include declaration. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, handle values need to match previously added services. - * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation, a service context is required. - * @retval ::NRF_ERROR_NOT_SUPPORTED Feature is not supported, service_handle must be that of the last added service. - * @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, self inclusions are not allowed. - * @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation. - * @retval ::NRF_ERROR_NOT_FOUND Attribute not found. - */ -SVCALL(SD_BLE_GATTS_INCLUDE_ADD, uint32_t, sd_ble_gatts_include_add(uint16_t service_handle, uint16_t inc_srvc_handle, uint16_t *p_include_handle)); - - -/**@brief Add a characteristic declaration, a characteristic value declaration and optional characteristic descriptor declarations to the Attribute Table. - * - * @note It is currently only possible to add a characteristic to the last added service (i.e. only sequential population is supported at this time). - * - * @note Several restrictions apply to the parameters, such as matching permissions between the user description descriptor and the writable auxiliaries bits, - * readable (no security) and writable (selectable) CCCDs and SCCDs and valid presentation format values. - * - * @note If no metadata is provided for the optional descriptors, their permissions will be derived from the characteristic permissions. - * - * @mscs - * @mmsc{@ref BLE_GATTS_ATT_TABLE_POP_MSC} - * @endmscs - * - * @param[in] service_handle Handle of the service where the characteristic is to be placed, if @ref BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially. - * @param[in] p_char_md Characteristic metadata. - * @param[in] p_attr_char_value Pointer to the attribute structure corresponding to the characteristic value. - * @param[out] p_handles Pointer to the structure where the assigned handles will be stored. - * - * @retval ::NRF_SUCCESS Successfully added a characteristic. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, service handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints. - * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation, a service context is required. - * @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack. - * @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation. - * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX. - */ -SVCALL(SD_BLE_GATTS_CHARACTERISTIC_ADD, uint32_t, sd_ble_gatts_characteristic_add(uint16_t service_handle, ble_gatts_char_md_t const *p_char_md, ble_gatts_attr_t const *p_attr_char_value, ble_gatts_char_handles_t *p_handles)); - - -/**@brief Add a descriptor to the Attribute Table. - * - * @note It is currently only possible to add a descriptor to the last added characteristic (i.e. only sequential population is supported at this time). - * - * @mscs - * @mmsc{@ref BLE_GATTS_ATT_TABLE_POP_MSC} - * @endmscs - * - * @param[in] char_handle Handle of the characteristic where the descriptor is to be placed, if @ref BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially. - * @param[in] p_attr Pointer to the attribute structure. - * @param[out] p_handle Pointer to a 16-bit word where the assigned handle will be stored. - * - * @retval ::NRF_SUCCESS Successfully added a descriptor. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, characteristic handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints. - * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation, a characteristic context is required. - * @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack. - * @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation. - * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX. - */ -SVCALL(SD_BLE_GATTS_DESCRIPTOR_ADD, uint32_t, sd_ble_gatts_descriptor_add(uint16_t char_handle, ble_gatts_attr_t const *p_attr, uint16_t *p_handle)); - -/**@brief Set the value of a given attribute. - * - * @note Values other than system attributes can be set at any time, regardless of whether any active connections exist. - * - * @mscs - * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_QUEUE_FULL_MSC} - * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_NOAUTH_MSC} - * @endmscs - * - * @param[in] conn_handle Connection handle. Ignored if the value does not belong to a system attribute. - * @param[in] handle Attribute handle. - * @param[in,out] p_value Attribute value information. - * - * @retval ::NRF_SUCCESS Successfully set the value of the attribute. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. - * @retval ::NRF_ERROR_NOT_FOUND Attribute not found. - * @retval ::NRF_ERROR_FORBIDDEN Forbidden handle supplied, certain attributes are not modifiable by the application. - * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied on a system attribute. - */ -SVCALL(SD_BLE_GATTS_VALUE_SET, uint32_t, sd_ble_gatts_value_set(uint16_t conn_handle, uint16_t handle, ble_gatts_value_t *p_value)); - -/**@brief Get the value of a given attribute. - * - * @note If the attribute value is longer than the size of the supplied buffer, - * @ref ble_gatts_value_t::len will return the total attribute value length (excluding offset), - * and not the number of bytes actually returned in @ref ble_gatts_value_t::p_value. - * The application may use this information to allocate a suitable buffer size. - * - * @note When retrieving system attribute values with this function, the connection handle - * may refer to an already disconnected connection. Refer to the documentation of - * @ref sd_ble_gatts_sys_attr_get for further information. - * - * @param[in] conn_handle Connection handle. Ignored if the value does not belong to a system attribute. - * @param[in] handle Attribute handle. - * @param[in,out] p_value Attribute value information. - * - * @retval ::NRF_SUCCESS Successfully retrieved the value of the attribute. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_NOT_FOUND Attribute not found. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid attribute offset supplied. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied on a system attribute. - * @retval ::BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value. - */ -SVCALL(SD_BLE_GATTS_VALUE_GET, uint32_t, sd_ble_gatts_value_get(uint16_t conn_handle, uint16_t handle, ble_gatts_value_t *p_value)); - -/**@brief Notify or Indicate an attribute value. - * - * @details This function checks for the relevant Client Characteristic Configuration descriptor value to verify that the relevant operation - * (notification or indication) has been enabled by the client. It is also able to update the attribute value before issuing the PDU, so that - * the application can atomically perform a value update and a server initiated transaction with a single API call. - * - * @note The local attribute value may be updated even if an outgoing packet is not sent to the peer due to an error during execution. - * The Attribute Table has been updated if one of the following error codes is returned: @ref NRF_ERROR_INVALID_STATE, @ref NRF_ERROR_BUSY, - * @ref NRF_ERROR_FORBIDDEN, @ref BLE_ERROR_GATTS_SYS_ATTR_MISSING and @ref NRF_ERROR_RESOURCES. - * The caller can check whether the value has been updated by looking at the contents of *(@ref ble_gatts_hvx_params_t::p_len). - * - * @note Only one indication procedure can be ongoing per connection at a time. - * If the application tries to indicate an attribute value while another indication procedure is ongoing, - * the function call will return @ref NRF_ERROR_BUSY. - * A @ref BLE_GATTS_EVT_HVC event will be issued as soon as the confirmation arrives from the peer. - * - * @note The number of Handle Value Notifications that can be queued is configured by @ref ble_gatts_conn_cfg_t::hvn_tx_queue_size - * When the queue is full, the function call will return @ref NRF_ERROR_RESOURCES. - * A @ref BLE_GATTS_EVT_HVN_TX_COMPLETE event will be issued as soon as the transmission of the notification is complete. - * - * @note The application can keep track of the available queue element count for notifications by following the procedure below: - * - Store initial queue element count in a variable. - * - Decrement the variable, which stores the currently available queue element count, by one when a call to this function returns @ref NRF_SUCCESS. - * - Increment the variable, which stores the current available queue element count, by the count variable in @ref BLE_GATTS_EVT_HVN_TX_COMPLETE event. - * - * @events - * @event{@ref BLE_GATTS_EVT_HVN_TX_COMPLETE, Notification transmission complete.} - * @event{@ref BLE_GATTS_EVT_HVC, Confirmation received from the peer.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GATTS_HVX_SYS_ATTRS_MISSING_MSC} - * @mmsc{@ref BLE_GATTS_HVN_MSC} - * @mmsc{@ref BLE_GATTS_HVI_MSC} - * @mmsc{@ref BLE_GATTS_HVX_DISABLED_MSC} - * @endmscs - * - * @param[in] conn_handle Connection handle. - * @param[in,out] p_hvx_params Pointer to an HVx parameters structure. If @ref ble_gatts_hvx_params_t::p_data - * contains a non-NULL pointer the attribute value will be updated with the contents - * pointed by it before sending the notification or indication. If the attribute value - * is updated, @ref ble_gatts_hvx_params_t::p_len is updated by the SoftDevice to - * contain the number of actual bytes written, else it will be set to 0. - * - * @retval ::NRF_SUCCESS Successfully queued a notification or indication for transmission, and optionally updated the attribute value. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_STATE One or more of the following is true: - * - Invalid Connection State - * - Notifications and/or indications not enabled in the CCCD - * - An ATT_MTU exchange is ongoing - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. - * @retval ::BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied. Only attributes added directly by the application are available to notify and indicate. - * @retval ::BLE_ERROR_GATTS_INVALID_ATTR_TYPE Invalid attribute type(s) supplied, only characteristic values may be notified and indicated. - * @retval ::NRF_ERROR_NOT_FOUND Attribute not found. - * @retval ::NRF_ERROR_FORBIDDEN The connection's current security level is lower than the one required by the write permissions of the CCCD associated with this characteristic. - * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied. - * @retval ::NRF_ERROR_BUSY For @ref BLE_GATT_HVX_INDICATION Procedure already in progress. Wait for a @ref BLE_GATTS_EVT_HVC event and retry. - * @retval ::BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value. - * @retval ::NRF_ERROR_RESOURCES Too many notifications queued. - * Wait for a @ref BLE_GATTS_EVT_HVN_TX_COMPLETE event and retry. - * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. - */ -SVCALL(SD_BLE_GATTS_HVX, uint32_t, sd_ble_gatts_hvx(uint16_t conn_handle, ble_gatts_hvx_params_t const *p_hvx_params)); - -/**@brief Indicate the Service Changed attribute value. - * - * @details This call will send a Handle Value Indication to one or more peers connected to inform them that the Attribute - * Table layout has changed. As soon as the peer has confirmed the indication, a @ref BLE_GATTS_EVT_SC_CONFIRM event will - * be issued. - * - * @note Some of the restrictions and limitations that apply to @ref sd_ble_gatts_hvx also apply here. - * - * @events - * @event{@ref BLE_GATTS_EVT_SC_CONFIRM, Confirmation of attribute table change received from peer.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_GATTS_SC_MSC} - * @endmscs - * - * @param[in] conn_handle Connection handle. - * @param[in] start_handle Start of affected attribute handle range. - * @param[in] end_handle End of affected attribute handle range. - * - * @retval ::NRF_SUCCESS Successfully queued the Service Changed indication for transmission. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_NOT_SUPPORTED Service Changed not enabled at initialization. See @ref - * sd_ble_cfg_set and @ref ble_gatts_cfg_service_changed_t. - * @retval ::NRF_ERROR_INVALID_STATE One or more of the following is true: - * - Invalid Connection State - * - Notifications and/or indications not enabled in the CCCD - * - An ATT_MTU exchange is ongoing - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. - * @retval ::BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied, handles must be in the range populated by the application. - * @retval ::NRF_ERROR_BUSY Procedure already in progress. - * @retval ::BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value. - * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. - */ -SVCALL(SD_BLE_GATTS_SERVICE_CHANGED, uint32_t, sd_ble_gatts_service_changed(uint16_t conn_handle, uint16_t start_handle, uint16_t end_handle)); - -/**@brief Respond to a Read/Write authorization request. - * - * @note This call should only be used as a response to a @ref BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST event issued to the application. - * - * @mscs - * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_AUTH_MSC} - * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_BUF_AUTH_MSC} - * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_NOAUTH_MSC} - * @mmsc{@ref BLE_GATTS_READ_REQ_AUTH_MSC} - * @mmsc{@ref BLE_GATTS_WRITE_REQ_AUTH_MSC} - * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_QUEUE_FULL_MSC} - * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_PEER_CANCEL_MSC} - * @endmscs - * - * @param[in] conn_handle Connection handle. - * @param[in] p_rw_authorize_reply_params Pointer to a structure with the attribute provided by the application. - * - * @note @ref ble_gatts_authorize_params_t::p_data is ignored when this function is used to respond - * to a @ref BLE_GATTS_AUTHORIZE_TYPE_READ event if @ref ble_gatts_authorize_params_t::update - * is set to 0. - * - * @retval ::NRF_SUCCESS Successfully queued a response to the peer, and in the case of a write operation, Attribute Table updated. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State or no authorization request pending. - * @retval ::NRF_ERROR_INVALID_PARAM Authorization op invalid, - * handle supplied does not match requested handle, - * or invalid data to be written provided by the application. - * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. - */ -SVCALL(SD_BLE_GATTS_RW_AUTHORIZE_REPLY, uint32_t, sd_ble_gatts_rw_authorize_reply(uint16_t conn_handle, ble_gatts_rw_authorize_reply_params_t const *p_rw_authorize_reply_params)); - - -/**@brief Update persistent system attribute information. - * - * @details Supply information about persistent system attributes to the stack, - * previously obtained using @ref sd_ble_gatts_sys_attr_get. - * This call is only allowed for active connections, and is usually - * made immediately after a connection is established with an known bonded device, - * often as a response to a @ref BLE_GATTS_EVT_SYS_ATTR_MISSING. - * - * p_sysattrs may point directly to the application's stored copy of the system attributes - * obtained using @ref sd_ble_gatts_sys_attr_get. - * If the pointer is NULL, the system attribute info is initialized, assuming that - * the application does not have any previously saved system attribute data for this device. - * - * @note The state of persistent system attributes is reset upon connection establishment and then remembered for its duration. - * - * @note If this call returns with an error code different from @ref NRF_SUCCESS, the storage of persistent system attributes may have been completed only partially. - * This means that the state of the attribute table is undefined, and the application should either provide a new set of attributes using this same call or - * reset the SoftDevice to return to a known state. - * - * @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_SYS_SRVCS is used with this function, only the system attributes included in system services will be modified. - * @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_USR_SRVCS is used with this function, only the system attributes included in user services will be modified. - * - * @mscs - * @mmsc{@ref BLE_GATTS_HVX_SYS_ATTRS_MISSING_MSC} - * @mmsc{@ref BLE_GATTS_SYS_ATTRS_UNK_PEER_MSC} - * @mmsc{@ref BLE_GATTS_SYS_ATTRS_BONDED_PEER_MSC} - * @endmscs - * - * @param[in] conn_handle Connection handle. - * @param[in] p_sys_attr_data Pointer to a saved copy of system attributes supplied to the stack, or NULL. - * @param[in] len Size of data pointed by p_sys_attr_data, in octets. - * @param[in] flags Optional additional flags, see @ref BLE_GATTS_SYS_ATTR_FLAGS - * - * @retval ::NRF_SUCCESS Successfully set the system attribute information. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid flags supplied. - * @retval ::NRF_ERROR_INVALID_DATA Invalid data supplied, the data should be exactly the same as retrieved with @ref sd_ble_gatts_sys_attr_get. - * @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation. - */ -SVCALL(SD_BLE_GATTS_SYS_ATTR_SET, uint32_t, sd_ble_gatts_sys_attr_set(uint16_t conn_handle, uint8_t const *p_sys_attr_data, uint16_t len, uint32_t flags)); - - -/**@brief Retrieve persistent system attribute information from the stack. - * - * @details This call is used to retrieve information about values to be stored persistently by the application - * during the lifetime of a connection or after it has been terminated. When a new connection is established with the same bonded device, - * the system attribute information retrieved with this function should be restored using using @ref sd_ble_gatts_sys_attr_set. - * If retrieved after disconnection, the data should be read before a new connection established. The connection handle for - * the previous, now disconnected, connection will remain valid until a new one is created to allow this API call to refer to it. - * Connection handles belonging to active connections can be used as well, but care should be taken since the system attributes - * may be written to at any time by the peer during a connection's lifetime. - * - * @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_SYS_SRVCS is used with this function, only the system attributes included in system services will be returned. - * @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_USR_SRVCS is used with this function, only the system attributes included in user services will be returned. - * - * @mscs - * @mmsc{@ref BLE_GATTS_SYS_ATTRS_BONDED_PEER_MSC} - * @endmscs - * - * @param[in] conn_handle Connection handle of the recently terminated connection. - * @param[out] p_sys_attr_data Pointer to a buffer where updated information about system attributes will be filled in. The format of the data is described - * in @ref BLE_GATTS_SYS_ATTRS_FORMAT. NULL can be provided to obtain the length of the data. - * @param[in,out] p_len Size of application buffer if p_sys_attr_data is not NULL. Unconditionally updated to actual length of system attribute data. - * @param[in] flags Optional additional flags, see @ref BLE_GATTS_SYS_ATTR_FLAGS - * - * @retval ::NRF_SUCCESS Successfully retrieved the system attribute information. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid flags supplied. - * @retval ::NRF_ERROR_DATA_SIZE The system attribute information did not fit into the provided buffer. - * @retval ::NRF_ERROR_NOT_FOUND No system attributes found. - */ -SVCALL(SD_BLE_GATTS_SYS_ATTR_GET, uint32_t, sd_ble_gatts_sys_attr_get(uint16_t conn_handle, uint8_t *p_sys_attr_data, uint16_t *p_len, uint32_t flags)); - - -/**@brief Retrieve the first valid user attribute handle. - * - * @param[out] p_handle Pointer to an integer where the handle will be stored. - * - * @retval ::NRF_SUCCESS Successfully retrieved the handle. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - */ -SVCALL(SD_BLE_GATTS_INITIAL_USER_HANDLE_GET, uint32_t, sd_ble_gatts_initial_user_handle_get(uint16_t *p_handle)); - -/**@brief Retrieve the attribute UUID and/or metadata. - * - * @param[in] handle Attribute handle - * @param[out] p_uuid UUID of the attribute. Use NULL to omit this field. - * @param[out] p_md Metadata of the attribute. Use NULL to omit this field. - * - * @retval ::NRF_SUCCESS Successfully retrieved the attribute metadata, - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameters supplied. Returned when both @c p_uuid and @c p_md are NULL. - * @retval ::NRF_ERROR_NOT_FOUND Attribute was not found. - */ -SVCALL(SD_BLE_GATTS_ATTR_GET, uint32_t, sd_ble_gatts_attr_get(uint16_t handle, ble_uuid_t * p_uuid, ble_gatts_attr_md_t * p_md)); - -/**@brief Reply to an ATT_MTU exchange request by sending an Exchange MTU Response to the client. - * - * @details This function is only used to reply to a @ref BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST event. - * - * @details The SoftDevice sets ATT_MTU to the minimum of: - * - The Client RX MTU value from @ref BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST, and - * - The Server RX MTU value. - * - * However, the SoftDevice never sets ATT_MTU lower than @ref BLE_GATT_ATT_MTU_DEFAULT. - * - * @mscs - * @mmsc{@ref BLE_GATTS_MTU_EXCHANGE} - * @endmscs - * - * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on. - * @param[in] server_rx_mtu Server RX MTU size. - * - The minimum value is @ref BLE_GATT_ATT_MTU_DEFAULT. - * - The maximum value is @ref ble_gatt_conn_cfg_t::att_mtu in the connection configuration - * used for this connection. - * - The value must be equal to Client RX MTU size given in @ref sd_ble_gattc_exchange_mtu_request - * if an ATT_MTU exchange has already been performed in the other direction. - * - * @retval ::NRF_SUCCESS Successfully sent response to the client. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State or no ATT_MTU exchange request pending. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid Server RX MTU size supplied. - * @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection. - */ -SVCALL(SD_BLE_GATTS_EXCHANGE_MTU_REPLY, uint32_t, sd_ble_gatts_exchange_mtu_reply(uint16_t conn_handle, uint16_t server_rx_mtu)); -/** @} */ - -#ifdef __cplusplus -} -#endif -#endif // BLE_GATTS_H__ - -/** - @} -*/ diff --git a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_hci.h b/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_hci.h deleted file mode 100755 index f0dde9a0..00000000 --- a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_hci.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Copyright (c) 2012 - 2017, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - @addtogroup BLE_COMMON - @{ -*/ - - -#ifndef BLE_HCI_H__ -#define BLE_HCI_H__ -#ifdef __cplusplus -extern "C" { -#endif - -/** @defgroup BLE_HCI_STATUS_CODES Bluetooth status codes - * @{ */ - -#define BLE_HCI_STATUS_CODE_SUCCESS 0x00 /**< Success. */ -#define BLE_HCI_STATUS_CODE_UNKNOWN_BTLE_COMMAND 0x01 /**< Unknown BLE Command. */ -#define BLE_HCI_STATUS_CODE_UNKNOWN_CONNECTION_IDENTIFIER 0x02 /**< Unknown Connection Identifier. */ -/*0x03 Hardware Failure -0x04 Page Timeout -*/ -#define BLE_HCI_AUTHENTICATION_FAILURE 0x05 /**< Authentication Failure. */ -#define BLE_HCI_STATUS_CODE_PIN_OR_KEY_MISSING 0x06 /**< Pin or Key missing. */ -#define BLE_HCI_MEMORY_CAPACITY_EXCEEDED 0x07 /**< Memory Capacity Exceeded. */ -#define BLE_HCI_CONNECTION_TIMEOUT 0x08 /**< Connection Timeout. */ -/*0x09 Connection Limit Exceeded -0x0A Synchronous Connection Limit To A Device Exceeded -0x0B ACL Connection Already Exists*/ -#define BLE_HCI_STATUS_CODE_COMMAND_DISALLOWED 0x0C /**< Command Disallowed. */ -/*0x0D Connection Rejected due to Limited Resources -0x0E Connection Rejected Due To Security Reasons -0x0F Connection Rejected due to Unacceptable BD_ADDR -0x10 Connection Accept Timeout Exceeded -0x11 Unsupported Feature or Parameter Value*/ -#define BLE_HCI_STATUS_CODE_INVALID_BTLE_COMMAND_PARAMETERS 0x12 /**< Invalid BLE Command Parameters. */ -#define BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION 0x13 /**< Remote User Terminated Connection. */ -#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES 0x14 /**< Remote Device Terminated Connection due to low resources.*/ -#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF 0x15 /**< Remote Device Terminated Connection due to power off. */ -#define BLE_HCI_LOCAL_HOST_TERMINATED_CONNECTION 0x16 /**< Local Host Terminated Connection. */ -/* -0x17 Repeated Attempts -0x18 Pairing Not Allowed -0x19 Unknown LMP PDU -*/ -#define BLE_HCI_UNSUPPORTED_REMOTE_FEATURE 0x1A /**< Unsupported Remote Feature. */ -/* -0x1B SCO Offset Rejected -0x1C SCO Interval Rejected -0x1D SCO Air Mode Rejected*/ -#define BLE_HCI_STATUS_CODE_INVALID_LMP_PARAMETERS 0x1E /**< Invalid LMP Parameters. */ -#define BLE_HCI_STATUS_CODE_UNSPECIFIED_ERROR 0x1F /**< Unspecified Error. */ -/*0x20 Unsupported LMP Parameter Value -0x21 Role Change Not Allowed -*/ -#define BLE_HCI_STATUS_CODE_LMP_RESPONSE_TIMEOUT 0x22 /**< LMP Response Timeout. */ -#define BLE_HCI_STATUS_CODE_LMP_ERROR_TRANSACTION_COLLISION 0x23 /**< LMP Error Transaction Collision/LL Procedure Collision. */ -#define BLE_HCI_STATUS_CODE_LMP_PDU_NOT_ALLOWED 0x24 /**< LMP PDU Not Allowed. */ -/*0x25 Encryption Mode Not Acceptable -0x26 Link Key Can Not be Changed -0x27 Requested QoS Not Supported -*/ -#define BLE_HCI_INSTANT_PASSED 0x28 /**< Instant Passed. */ -#define BLE_HCI_PAIRING_WITH_UNIT_KEY_UNSUPPORTED 0x29 /**< Pairing with Unit Key Unsupported. */ -#define BLE_HCI_DIFFERENT_TRANSACTION_COLLISION 0x2A /**< Different Transaction Collision. */ -/* -0x2B Reserved -0x2C QoS Unacceptable Parameter -0x2D QoS Rejected -0x2E Channel Classification Not Supported -0x2F Insufficient Security -*/ -#define BLE_HCI_PARAMETER_OUT_OF_MANDATORY_RANGE 0x30 /**< Parameter Out Of Mandatory Range. */ -/* -0x31 Reserved -0x32 Role Switch Pending -0x33 Reserved -0x34 Reserved Slot Violation -0x35 Role Switch Failed -0x36 Extended Inquiry Response Too Large -0x37 Secure Simple Pairing Not Supported By Host. -0x38 Host Busy - Pairing -0x39 Connection Rejected due to No Suitable Channel Found*/ -#define BLE_HCI_CONTROLLER_BUSY 0x3A /**< Controller Busy. */ -#define BLE_HCI_CONN_INTERVAL_UNACCEPTABLE 0x3B /**< Connection Interval Unacceptable. */ -#define BLE_HCI_DIRECTED_ADVERTISER_TIMEOUT 0x3C /**< Directed Advertisement Timeout. */ -#define BLE_HCI_CONN_TERMINATED_DUE_TO_MIC_FAILURE 0x3D /**< Connection Terminated due to MIC Failure. */ -#define BLE_HCI_CONN_FAILED_TO_BE_ESTABLISHED 0x3E /**< Connection Failed to be Established. */ - -/** @} */ - - -#ifdef __cplusplus -} -#endif -#endif // BLE_HCI_H__ - -/** @} */ diff --git a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_l2cap.h b/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_l2cap.h deleted file mode 100755 index edaf6641..00000000 --- a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_l2cap.h +++ /dev/null @@ -1,506 +0,0 @@ -/* - * Copyright (c) 2011 - 2018, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - @addtogroup BLE_L2CAP Logical Link Control and Adaptation Protocol (L2CAP) - @{ - @brief Definitions and prototypes for the L2CAP interface. - */ - -#ifndef BLE_L2CAP_H__ -#define BLE_L2CAP_H__ - -#include <stdint.h> -#include "nrf_svc.h" -#include "nrf_error.h" -#include "ble_ranges.h" -#include "ble_types.h" -#include "ble_err.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/**@addtogroup BLE_L2CAP_TERMINOLOGY Terminology - * @{ - * @details - * - * L2CAP SDU - * - A data unit that the application can send/receive to/from a peer. - * - * L2CAP PDU - * - A data unit that is exchanged between local and remote L2CAP entities. - * It consists of L2CAP protocol control information and payload fields. - * The payload field can contain an L2CAP SDU or a part of an L2CAP SDU. - * - * L2CAP MTU - * - The maximum length of an L2CAP SDU. - * - * L2CAP MPS - * - The maximum length of an L2CAP PDU payload field. - * - * Credits - * - A value indicating the number of L2CAP PDUs that the receiver of the credit can send to the peer. - * @} */ - -/**@addtogroup BLE_L2CAP_ENUMERATIONS Enumerations - * @{ */ - -/**@brief L2CAP API SVC numbers. */ -enum BLE_L2CAP_SVCS -{ - SD_BLE_L2CAP_CH_SETUP = BLE_L2CAP_SVC_BASE + 0, /**< Set up an L2CAP channel. */ - SD_BLE_L2CAP_CH_RELEASE = BLE_L2CAP_SVC_BASE + 1, /**< Release an L2CAP channel. */ - SD_BLE_L2CAP_CH_RX = BLE_L2CAP_SVC_BASE + 2, /**< Receive an SDU on an L2CAP channel. */ - SD_BLE_L2CAP_CH_TX = BLE_L2CAP_SVC_BASE + 3, /**< Transmit an SDU on an L2CAP channel. */ - SD_BLE_L2CAP_CH_FLOW_CONTROL = BLE_L2CAP_SVC_BASE + 4, /**< Advanced SDU reception flow control. */ -}; - -/**@brief L2CAP Event IDs. */ -enum BLE_L2CAP_EVTS -{ - BLE_L2CAP_EVT_CH_SETUP_REQUEST = BLE_L2CAP_EVT_BASE + 0, /**< L2CAP Channel Setup Request event. - \n See @ref ble_l2cap_evt_ch_setup_request_t. */ - BLE_L2CAP_EVT_CH_SETUP_REFUSED = BLE_L2CAP_EVT_BASE + 1, /**< L2CAP Channel Setup Refused event. - \n See @ref ble_l2cap_evt_ch_setup_refused_t. */ - BLE_L2CAP_EVT_CH_SETUP = BLE_L2CAP_EVT_BASE + 2, /**< L2CAP Channel Setup Completed event. - \n See @ref ble_l2cap_evt_ch_setup_t. */ - BLE_L2CAP_EVT_CH_RELEASED = BLE_L2CAP_EVT_BASE + 3, /**< L2CAP Channel Released event. - \n No additional event structure applies. */ - BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED = BLE_L2CAP_EVT_BASE + 4, /**< L2CAP Channel SDU data buffer released event. - \n See @ref ble_l2cap_evt_ch_sdu_buf_released_t. */ - BLE_L2CAP_EVT_CH_CREDIT = BLE_L2CAP_EVT_BASE + 5, /**< L2CAP Channel Credit received. - \n See @ref ble_l2cap_evt_ch_credit_t. */ - BLE_L2CAP_EVT_CH_RX = BLE_L2CAP_EVT_BASE + 6, /**< L2CAP Channel SDU received. - \n See @ref ble_l2cap_evt_ch_rx_t. */ - BLE_L2CAP_EVT_CH_TX = BLE_L2CAP_EVT_BASE + 7, /**< L2CAP Channel SDU transmitted. - \n See @ref ble_l2cap_evt_ch_tx_t. */ -}; - -/** @} */ - -/**@addtogroup BLE_L2CAP_DEFINES Defines - * @{ */ - -/**@brief Maximum number of L2CAP channels per connection. */ -#define BLE_L2CAP_CH_COUNT_MAX (64) - -/**@brief Minimum L2CAP MTU, in bytes. */ -#define BLE_L2CAP_MTU_MIN (23) - -/**@brief Minimum L2CAP MPS, in bytes. */ -#define BLE_L2CAP_MPS_MIN (23) - -/**@brief Invalid CID. */ -#define BLE_L2CAP_CID_INVALID (0x0000) - -/**@brief Default number of credits for @ref sd_ble_l2cap_ch_flow_control. */ -#define BLE_L2CAP_CREDITS_DEFAULT (1) - -/**@defgroup BLE_L2CAP_CH_SETUP_REFUSED_SRCS L2CAP channel setup refused sources - * @{ */ -#define BLE_L2CAP_CH_SETUP_REFUSED_SRC_LOCAL (0x01) /**< Local. */ -#define BLE_L2CAP_CH_SETUP_REFUSED_SRC_REMOTE (0x02) /**< Remote. */ - /** @} */ - - /** @defgroup BLE_L2CAP_CH_STATUS_CODES L2CAP channel status codes - * @{ */ -#define BLE_L2CAP_CH_STATUS_CODE_SUCCESS (0x0000) /**< Success. */ -#define BLE_L2CAP_CH_STATUS_CODE_LE_PSM_NOT_SUPPORTED (0x0002) /**< LE_PSM not supported. */ -#define BLE_L2CAP_CH_STATUS_CODE_NO_RESOURCES (0x0004) /**< No resources available. */ -#define BLE_L2CAP_CH_STATUS_CODE_INSUFF_AUTHENTICATION (0x0005) /**< Insufficient authentication. */ -#define BLE_L2CAP_CH_STATUS_CODE_INSUFF_AUTHORIZATION (0x0006) /**< Insufficient authorization. */ -#define BLE_L2CAP_CH_STATUS_CODE_INSUFF_ENC_KEY_SIZE (0x0007) /**< Insufficient encryption key size. */ -#define BLE_L2CAP_CH_STATUS_CODE_INSUFF_ENC (0x0008) /**< Insufficient encryption. */ -#define BLE_L2CAP_CH_STATUS_CODE_INVALID_SCID (0x0009) /**< Invalid Source CID. */ -#define BLE_L2CAP_CH_STATUS_CODE_SCID_ALLOCATED (0x000A) /**< Source CID already allocated. */ -#define BLE_L2CAP_CH_STATUS_CODE_UNACCEPTABLE_PARAMS (0x000B) /**< Unacceptable parameters. */ -#define BLE_L2CAP_CH_STATUS_CODE_NOT_UNDERSTOOD (0x8000) /**< Command Reject received instead of LE Credit Based Connection Response. */ -#define BLE_L2CAP_CH_STATUS_CODE_TIMEOUT (0xC000) /**< Operation timed out. */ -/** @} */ - -/** @} */ - -/**@addtogroup BLE_L2CAP_STRUCTURES Structures - * @{ */ - -/** - * @brief BLE L2CAP connection configuration parameters, set with @ref sd_ble_cfg_set. - * - * @note These parameters are set per connection, so all L2CAP channels created on this connection - * will have the same parameters. - * - * @retval ::NRF_ERROR_INVALID_PARAM One or more of the following is true: - * - rx_mps is smaller than @ref BLE_L2CAP_MPS_MIN. - * - tx_mps is smaller than @ref BLE_L2CAP_MPS_MIN. - * - ch_count is greater than @ref BLE_L2CAP_CH_COUNT_MAX. - * @retval ::NRF_ERROR_NO_MEM rx_mps or tx_mps is set too high. - */ -typedef struct -{ - uint16_t rx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP shall - be able to receive on L2CAP channels on connections with this - configuration. The minimum value is @ref BLE_L2CAP_MPS_MIN. */ - uint16_t tx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP shall - be able to transmit on L2CAP channels on connections with this - configuration. The minimum value is @ref BLE_L2CAP_MPS_MIN. */ - uint8_t rx_queue_size; /**< Number of SDU data buffers that can be queued for reception per - L2CAP channel. The minimum value is one. */ - uint8_t tx_queue_size; /**< Number of SDU data buffers that can be queued for transmission - per L2CAP channel. The minimum value is one. */ - uint8_t ch_count; /**< Number of L2CAP channels the application can create per connection - with this configuration. The default value is zero, the maximum - value is @ref BLE_L2CAP_CH_COUNT_MAX. - @note if this parameter is set to zero, all other parameters in - @ref ble_l2cap_conn_cfg_t are ignored. */ -} ble_l2cap_conn_cfg_t; - -/**@brief L2CAP channel RX parameters. */ -typedef struct -{ - uint16_t rx_mtu; /**< The maximum L2CAP SDU size, in bytes, that L2CAP shall be able to - receive on this L2CAP channel. - - Must be equal to or greater than @ref BLE_L2CAP_MTU_MIN. */ - uint16_t rx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP shall be - able to receive on this L2CAP channel. - - Must be equal to or greater than @ref BLE_L2CAP_MPS_MIN. - - Must be equal to or less than @ref ble_l2cap_conn_cfg_t::rx_mps. */ - ble_data_t sdu_buf; /**< SDU data buffer for reception. - - If @ref ble_data_t::p_data is non-NULL, initial credits are - issued to the peer. - - If @ref ble_data_t::p_data is NULL, no initial credits are - issued to the peer. */ -} ble_l2cap_ch_rx_params_t; - -/**@brief L2CAP channel setup parameters. */ -typedef struct -{ - ble_l2cap_ch_rx_params_t rx_params; /**< L2CAP channel RX parameters. */ - uint16_t le_psm; /**< LE Protocol/Service Multiplexer. Used when requesting - setup of an L2CAP channel, ignored otherwise. */ - uint16_t status; /**< Status code, see @ref BLE_L2CAP_CH_STATUS_CODES. - Used when replying to a setup request of an L2CAP - channel, ignored otherwise. */ -} ble_l2cap_ch_setup_params_t; - -/**@brief L2CAP channel TX parameters. */ -typedef struct -{ - uint16_t tx_mtu; /**< The maximum L2CAP SDU size, in bytes, that L2CAP is able to - transmit on this L2CAP channel. */ - uint16_t peer_mps; /**< The maximum L2CAP PDU payload size, in bytes, that the peer is - able to receive on this L2CAP channel. */ - uint16_t tx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP is able - to transmit on this L2CAP channel. This is effective tx_mps, - selected by the SoftDevice as - MIN( @ref ble_l2cap_ch_tx_params_t::peer_mps, @ref ble_l2cap_conn_cfg_t::tx_mps ) */ - uint16_t credits; /**< Initial credits given by the peer. */ -} ble_l2cap_ch_tx_params_t; - -/**@brief L2CAP Channel Setup Request event. */ -typedef struct -{ - ble_l2cap_ch_tx_params_t tx_params; /**< L2CAP channel TX parameters. */ - uint16_t le_psm; /**< LE Protocol/Service Multiplexer. */ -} ble_l2cap_evt_ch_setup_request_t; - -/**@brief L2CAP Channel Setup Refused event. */ -typedef struct -{ - uint8_t source; /**< Source, see @ref BLE_L2CAP_CH_SETUP_REFUSED_SRCS */ - uint16_t status; /**< Status code, see @ref BLE_L2CAP_CH_STATUS_CODES */ -} ble_l2cap_evt_ch_setup_refused_t; - -/**@brief L2CAP Channel Setup Completed event. */ -typedef struct -{ - ble_l2cap_ch_tx_params_t tx_params; /**< L2CAP channel TX parameters. */ -} ble_l2cap_evt_ch_setup_t; - -/**@brief L2CAP Channel SDU Data Buffer Released event. */ -typedef struct -{ - ble_data_t sdu_buf; /**< Returned reception or transmission SDU data buffer. The SoftDevice - returns SDU data buffers supplied by the application, which have - not yet been returned previously via a @ref BLE_L2CAP_EVT_CH_RX or - @ref BLE_L2CAP_EVT_CH_TX event. */ -} ble_l2cap_evt_ch_sdu_buf_released_t; - -/**@brief L2CAP Channel Credit received event. */ -typedef struct -{ - uint16_t credits; /**< Additional credits given by the peer. */ -} ble_l2cap_evt_ch_credit_t; - -/**@brief L2CAP Channel received SDU event. */ -typedef struct -{ - uint16_t sdu_len; /**< Total SDU length, in bytes. */ - ble_data_t sdu_buf; /**< SDU data buffer. - @note If there is not enough space in the buffer - (sdu_buf.len < sdu_len) then the rest of the SDU will be - silently discarded by the SoftDevice. */ -} ble_l2cap_evt_ch_rx_t; - -/**@brief L2CAP Channel transmitted SDU event. */ -typedef struct -{ - ble_data_t sdu_buf; /**< SDU data buffer. */ -} ble_l2cap_evt_ch_tx_t; - -/**@brief L2CAP event structure. */ -typedef struct -{ - uint16_t conn_handle; /**< Connection Handle on which the event occured. */ - uint16_t local_cid; /**< Local Channel ID of the L2CAP channel, or - @ref BLE_L2CAP_CID_INVALID if not present. */ - union - { - ble_l2cap_evt_ch_setup_request_t ch_setup_request; /**< L2CAP Channel Setup Request Event Parameters. */ - ble_l2cap_evt_ch_setup_refused_t ch_setup_refused; /**< L2CAP Channel Setup Refused Event Parameters. */ - ble_l2cap_evt_ch_setup_t ch_setup; /**< L2CAP Channel Setup Completed Event Parameters. */ - ble_l2cap_evt_ch_sdu_buf_released_t ch_sdu_buf_released;/**< L2CAP Channel SDU Data Buffer Released Event Parameters. */ - ble_l2cap_evt_ch_credit_t credit; /**< L2CAP Channel Credit Received Event Parameters. */ - ble_l2cap_evt_ch_rx_t rx; /**< L2CAP Channel SDU Received Event Parameters. */ - ble_l2cap_evt_ch_tx_t tx; /**< L2CAP Channel SDU Transmitted Event Parameters. */ - } params; /**< Event Parameters. */ -} ble_l2cap_evt_t; - -/** @} */ - -/**@addtogroup BLE_L2CAP_FUNCTIONS Functions - * @{ */ - -/**@brief Set up an L2CAP channel. - * - * @details This function is used to: - * - Request setup of an L2CAP channel: sends an LE Credit Based Connection Request packet to a peer. - * - Reply to a setup request of an L2CAP channel (if called in response to a - * @ref BLE_L2CAP_EVT_CH_SETUP_REQUEST event): sends an LE Credit Based Connection - * Response packet to a peer. - * - * @note A call to this function will require the application to keep the SDU data buffer alive - * until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_RX or - * @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event. - * - * @events - * @event{@ref BLE_L2CAP_EVT_CH_SETUP, Setup successful.} - * @event{@ref BLE_L2CAP_EVT_CH_SETUP_REFUSED, Setup failed.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_L2CAP_CH_SETUP_MSC} - * @endmscs - * - * @param[in] conn_handle Connection Handle. - * @param[in,out] p_local_cid Pointer to a uint16_t containing Local Channel ID of the L2CAP channel: - * - As input: @ref BLE_L2CAP_CID_INVALID when requesting setup of an L2CAP - * channel or local_cid provided in the @ref BLE_L2CAP_EVT_CH_SETUP_REQUEST - * event when replying to a setup request of an L2CAP channel. - * - As output: local_cid for this channel. - * @param[in] p_params L2CAP channel parameters. - * - * @retval ::NRF_SUCCESS Successfully queued request or response for transmission. - * @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. - * @retval ::NRF_ERROR_INVALID_LENGTH Supplied higher rx_mps than has been configured on this link. - * @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (L2CAP channel already set up). - * @retval ::NRF_ERROR_NOT_FOUND CID not found. - * @retval ::NRF_ERROR_RESOURCES The limit has been reached for available L2CAP channels, - * see @ref ble_l2cap_conn_cfg_t::ch_count. - */ -SVCALL(SD_BLE_L2CAP_CH_SETUP, uint32_t, sd_ble_l2cap_ch_setup(uint16_t conn_handle, uint16_t *p_local_cid, ble_l2cap_ch_setup_params_t const *p_params)); - -/**@brief Release an L2CAP channel. - * - * @details This sends a Disconnection Request packet to a peer. - * - * @events - * @event{@ref BLE_L2CAP_EVT_CH_RELEASED, Release complete.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_L2CAP_CH_RELEASE_MSC} - * @endmscs - * - * @param[in] conn_handle Connection Handle. - * @param[in] local_cid Local Channel ID of the L2CAP channel. - * - * @retval ::NRF_SUCCESS Successfully queued request for transmission. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is - * in progress for the L2CAP channel). - * @retval ::NRF_ERROR_NOT_FOUND CID not found. - */ -SVCALL(SD_BLE_L2CAP_CH_RELEASE, uint32_t, sd_ble_l2cap_ch_release(uint16_t conn_handle, uint16_t local_cid)); - -/**@brief Receive an SDU on an L2CAP channel. - * - * @details This may issue additional credits to the peer using an LE Flow Control Credit packet. - * - * @note A call to this function will require the application to keep the memory pointed by - * @ref ble_data_t::p_data alive until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_RX - * or @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event. - * - * @note The SoftDevice can queue up to @ref ble_l2cap_conn_cfg_t::rx_queue_size SDU data buffers - * for reception per L2CAP channel. - * - * @events - * @event{@ref BLE_L2CAP_EVT_CH_RX, The SDU is received.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_L2CAP_CH_RX_MSC} - * @endmscs - * - * @param[in] conn_handle Connection Handle. - * @param[in] local_cid Local Channel ID of the L2CAP channel. - * @param[in] p_sdu_buf Pointer to the SDU data buffer. - * - * @retval ::NRF_SUCCESS Buffer accepted. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is - * in progress for an L2CAP channel). - * @retval ::NRF_ERROR_NOT_FOUND CID not found. - * @retval ::NRF_ERROR_RESOURCES Too many SDU data buffers supplied. Wait for a - * @ref BLE_L2CAP_EVT_CH_RX event and retry. - */ -SVCALL(SD_BLE_L2CAP_CH_RX, uint32_t, sd_ble_l2cap_ch_rx(uint16_t conn_handle, uint16_t local_cid, ble_data_t const *p_sdu_buf)); - -/**@brief Transmit an SDU on an L2CAP channel. - * - * @note A call to this function will require the application to keep the memory pointed by - * @ref ble_data_t::p_data alive until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_TX - * or @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event. - * - * @note The SoftDevice can queue up to @ref ble_l2cap_conn_cfg_t::tx_queue_size SDUs for - * transmission per L2CAP channel. - * - * @note The application can keep track of the available credits for transmission by following - * the procedure below: - * - Store initial credits given by the peer in a variable. - * (Initial credits are provided in a @ref BLE_L2CAP_EVT_CH_SETUP event.) - * - Decrement the variable, which stores the currently available credits, by - * ceiling((@ref ble_data_t::len + 2) / tx_mps) when a call to this function returns - * @ref NRF_SUCCESS. (tx_mps is provided in a @ref BLE_L2CAP_EVT_CH_SETUP event.) - * - Increment the variable, which stores the currently available credits, by additional - * credits given by the peer in a @ref BLE_L2CAP_EVT_CH_CREDIT event. - * - * @events - * @event{@ref BLE_L2CAP_EVT_CH_TX, The SDU is transmitted.} - * @endevents - * - * @mscs - * @mmsc{@ref BLE_L2CAP_CH_TX_MSC} - * @endmscs - * - * @param[in] conn_handle Connection Handle. - * @param[in] local_cid Local Channel ID of the L2CAP channel. - * @param[in] p_sdu_buf Pointer to the SDU data buffer. - * - * @retval ::NRF_SUCCESS Successfully queued L2CAP SDU for transmission. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is - * in progress for the L2CAP channel). - * @retval ::NRF_ERROR_NOT_FOUND CID not found. - * @retval ::NRF_ERROR_DATA_SIZE Invalid SDU length supplied, must not be more than - * @ref ble_l2cap_ch_tx_params_t::tx_mtu provided in - * @ref BLE_L2CAP_EVT_CH_SETUP event. - * @retval ::NRF_ERROR_RESOURCES Too many SDUs queued for transmission. Wait for a - * @ref BLE_L2CAP_EVT_CH_TX event and retry. - */ -SVCALL(SD_BLE_L2CAP_CH_TX, uint32_t, sd_ble_l2cap_ch_tx(uint16_t conn_handle, uint16_t local_cid, ble_data_t const *p_sdu_buf)); - -/**@brief Advanced SDU reception flow control. - * - * @details Adjust the way the SoftDevice issues credits to the peer. - * This may issue additional credits to the peer using an LE Flow Control Credit packet. - * - * @mscs - * @mmsc{@ref BLE_L2CAP_CH_FLOW_CONTROL_MSC} - * @endmscs - * - * @param[in] conn_handle Connection Handle. - * @param[in] local_cid Local Channel ID of the L2CAP channel or @ref BLE_L2CAP_CID_INVALID to set - * the value that will be used for newly created channels. - * @param[in] credits Number of credits that the SoftDevice will make sure the peer has every - * time it starts using a new reception buffer. - * - @ref BLE_L2CAP_CREDITS_DEFAULT is the default value the SoftDevice will - * use if this function is not called. - * - If set to zero, the SoftDevice will stop issuing credits for new reception - * buffers the application provides or has provided. SDU reception that is - * currently ongoing will be allowed to complete. - * @param[out] p_credits NULL or pointer to a uint16_t. If a valid pointer is provided, it will be - * written by the SoftDevice with the number of credits that is or will be - * available to the peer. If the value written by the SoftDevice is 0 when - * credits parameter was set to 0, the peer will not be able to send more - * data until more credits are provided by calling this function again with - * credits > 0. This parameter is ignored when local_cid is set to - * @ref BLE_L2CAP_CID_INVALID. - * - * @note Application should take care when setting number of credits higher than default value. In - * this case the application must make sure that the SoftDevice always has reception buffers - * available (see @ref sd_ble_l2cap_ch_rx) for that channel. If the SoftDevice does not have - * such buffers available, packets may be NACKed on the Link Layer and all Bluetooth traffic - * on the connection handle may be stalled until the SoftDevice again has an available - * reception buffer. This applies even if the application has used this call to set the - * credits back to default, or zero. - * - * @retval ::NRF_SUCCESS Flow control parameters accepted. - * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. - * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. - * @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is - * in progress for an L2CAP channel). - * @retval ::NRF_ERROR_NOT_FOUND CID not found. - */ -SVCALL(SD_BLE_L2CAP_CH_FLOW_CONTROL, uint32_t, sd_ble_l2cap_ch_flow_control(uint16_t conn_handle, uint16_t local_cid, uint16_t credits, uint16_t *p_credits)); - -/** @} */ - -#ifdef __cplusplus -} -#endif -#endif // BLE_L2CAP_H__ - -/** - @} -*/ diff --git a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_ranges.h b/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_ranges.h deleted file mode 100755 index 0935bca0..00000000 --- a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_ranges.h +++ /dev/null @@ -1,156 +0,0 @@ -/* - * Copyright (c) 2012 - 2018, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - @addtogroup BLE_COMMON - @{ - @defgroup ble_ranges Module specific SVC, event and option number subranges - @{ - - @brief Definition of SVC, event and option number subranges for each API module. - - @note - SVCs, event and option numbers are split into subranges for each API module. - Each module receives its entire allocated range of SVC calls, whether implemented or not, - but return BLE_ERROR_NOT_SUPPORTED for unimplemented or undefined calls in its range. - - Note that the symbols BLE_<module>_SVC_LAST is the end of the allocated SVC range, - rather than the last SVC function call actually defined and implemented. - - Specific SVC, event and option values are defined in each module's ble_<module>.h file, - which defines names of each individual SVC code based on the range start value. -*/ - -#ifndef BLE_RANGES_H__ -#define BLE_RANGES_H__ - -#ifdef __cplusplus -extern "C" { -#endif - -#define BLE_SVC_BASE 0x60 /**< Common BLE SVC base. */ -#define BLE_SVC_LAST 0x6B /**< Common BLE SVC last. */ - -#define BLE_GAP_SVC_BASE 0x6C /**< GAP BLE SVC base. */ -#define BLE_GAP_SVC_LAST 0x9A /**< GAP BLE SVC last. */ - -#define BLE_GATTC_SVC_BASE 0x9B /**< GATTC BLE SVC base. */ -#define BLE_GATTC_SVC_LAST 0xA7 /**< GATTC BLE SVC last. */ - -#define BLE_GATTS_SVC_BASE 0xA8 /**< GATTS BLE SVC base. */ -#define BLE_GATTS_SVC_LAST 0xB7 /**< GATTS BLE SVC last. */ - -#define BLE_L2CAP_SVC_BASE 0xB8 /**< L2CAP BLE SVC base. */ -#define BLE_L2CAP_SVC_LAST 0xBF /**< L2CAP BLE SVC last. */ - - -#define BLE_EVT_INVALID 0x00 /**< Invalid BLE Event. */ - -#define BLE_EVT_BASE 0x01 /**< Common BLE Event base. */ -#define BLE_EVT_LAST 0x0F /**< Common BLE Event last. */ - -#define BLE_GAP_EVT_BASE 0x10 /**< GAP BLE Event base. */ -#define BLE_GAP_EVT_LAST 0x2F /**< GAP BLE Event last. */ - -#define BLE_GATTC_EVT_BASE 0x30 /**< GATTC BLE Event base. */ -#define BLE_GATTC_EVT_LAST 0x4F /**< GATTC BLE Event last. */ - -#define BLE_GATTS_EVT_BASE 0x50 /**< GATTS BLE Event base. */ -#define BLE_GATTS_EVT_LAST 0x6F /**< GATTS BLE Event last. */ - -#define BLE_L2CAP_EVT_BASE 0x70 /**< L2CAP BLE Event base. */ -#define BLE_L2CAP_EVT_LAST 0x8F /**< L2CAP BLE Event last. */ - - -#define BLE_OPT_INVALID 0x00 /**< Invalid BLE Option. */ - -#define BLE_OPT_BASE 0x01 /**< Common BLE Option base. */ -#define BLE_OPT_LAST 0x1F /**< Common BLE Option last. */ - -#define BLE_GAP_OPT_BASE 0x20 /**< GAP BLE Option base. */ -#define BLE_GAP_OPT_LAST 0x3F /**< GAP BLE Option last. */ - -#define BLE_GATT_OPT_BASE 0x40 /**< GATT BLE Option base. */ -#define BLE_GATT_OPT_LAST 0x5F /**< GATT BLE Option last. */ - -#define BLE_GATTC_OPT_BASE 0x60 /**< GATTC BLE Option base. */ -#define BLE_GATTC_OPT_LAST 0x7F /**< GATTC BLE Option last. */ - -#define BLE_GATTS_OPT_BASE 0x80 /**< GATTS BLE Option base. */ -#define BLE_GATTS_OPT_LAST 0x9F /**< GATTS BLE Option last. */ - -#define BLE_L2CAP_OPT_BASE 0xA0 /**< L2CAP BLE Option base. */ -#define BLE_L2CAP_OPT_LAST 0xBF /**< L2CAP BLE Option last. */ - - -#define BLE_CFG_INVALID 0x00 /**< Invalid BLE configuration. */ - -#define BLE_CFG_BASE 0x01 /**< Common BLE configuration base. */ -#define BLE_CFG_LAST 0x1F /**< Common BLE configuration last. */ - -#define BLE_CONN_CFG_BASE 0x20 /**< BLE connection configuration base. */ -#define BLE_CONN_CFG_LAST 0x3F /**< BLE connection configuration last. */ - -#define BLE_GAP_CFG_BASE 0x40 /**< GAP BLE configuration base. */ -#define BLE_GAP_CFG_LAST 0x5F /**< GAP BLE configuration last. */ - -#define BLE_GATT_CFG_BASE 0x60 /**< GATT BLE configuration base. */ -#define BLE_GATT_CFG_LAST 0x7F /**< GATT BLE configuration last. */ - -#define BLE_GATTC_CFG_BASE 0x80 /**< GATTC BLE configuration base. */ -#define BLE_GATTC_CFG_LAST 0x9F /**< GATTC BLE configuration last. */ - -#define BLE_GATTS_CFG_BASE 0xA0 /**< GATTS BLE configuration base. */ -#define BLE_GATTS_CFG_LAST 0xBF /**< GATTS BLE configuration last. */ - -#define BLE_L2CAP_CFG_BASE 0xC0 /**< L2CAP BLE configuration base. */ -#define BLE_L2CAP_CFG_LAST 0xDF /**< L2CAP BLE configuration last. */ - - - - - -#ifdef __cplusplus -} -#endif -#endif /* BLE_RANGES_H__ */ - -/** - @} - @} -*/ diff --git a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_types.h b/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_types.h deleted file mode 100755 index 88c93180..00000000 --- a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_types.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - * Copyright (c) 2012 - 2017, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - @addtogroup BLE_COMMON - @{ - @defgroup ble_types Common types and macro definitions - @{ - - @brief Common types and macro definitions for the BLE SoftDevice. - */ - -#ifndef BLE_TYPES_H__ -#define BLE_TYPES_H__ - -#include <stdint.h> - -#ifdef __cplusplus -extern "C" { -#endif - -/** @addtogroup BLE_TYPES_DEFINES Defines - * @{ */ - -/** @defgroup BLE_CONN_HANDLES BLE Connection Handles - * @{ */ -#define BLE_CONN_HANDLE_INVALID 0xFFFF /**< Invalid Connection Handle. */ -#define BLE_CONN_HANDLE_ALL 0xFFFE /**< Applies to all Connection Handles. */ -/** @} */ - - -/** @defgroup BLE_UUID_VALUES Assigned Values for BLE UUIDs - * @{ */ -/* Generic UUIDs, applicable to all services */ -#define BLE_UUID_UNKNOWN 0x0000 /**< Reserved UUID. */ -#define BLE_UUID_SERVICE_PRIMARY 0x2800 /**< Primary Service. */ -#define BLE_UUID_SERVICE_SECONDARY 0x2801 /**< Secondary Service. */ -#define BLE_UUID_SERVICE_INCLUDE 0x2802 /**< Include. */ -#define BLE_UUID_CHARACTERISTIC 0x2803 /**< Characteristic. */ -#define BLE_UUID_DESCRIPTOR_CHAR_EXT_PROP 0x2900 /**< Characteristic Extended Properties Descriptor. */ -#define BLE_UUID_DESCRIPTOR_CHAR_USER_DESC 0x2901 /**< Characteristic User Description Descriptor. */ -#define BLE_UUID_DESCRIPTOR_CLIENT_CHAR_CONFIG 0x2902 /**< Client Characteristic Configuration Descriptor. */ -#define BLE_UUID_DESCRIPTOR_SERVER_CHAR_CONFIG 0x2903 /**< Server Characteristic Configuration Descriptor. */ -#define BLE_UUID_DESCRIPTOR_CHAR_PRESENTATION_FORMAT 0x2904 /**< Characteristic Presentation Format Descriptor. */ -#define BLE_UUID_DESCRIPTOR_CHAR_AGGREGATE_FORMAT 0x2905 /**< Characteristic Aggregate Format Descriptor. */ -/* GATT specific UUIDs */ -#define BLE_UUID_GATT 0x1801 /**< Generic Attribute Profile. */ -#define BLE_UUID_GATT_CHARACTERISTIC_SERVICE_CHANGED 0x2A05 /**< Service Changed Characteristic. */ -/* GAP specific UUIDs */ -#define BLE_UUID_GAP 0x1800 /**< Generic Access Profile. */ -#define BLE_UUID_GAP_CHARACTERISTIC_DEVICE_NAME 0x2A00 /**< Device Name Characteristic. */ -#define BLE_UUID_GAP_CHARACTERISTIC_APPEARANCE 0x2A01 /**< Appearance Characteristic. */ -#define BLE_UUID_GAP_CHARACTERISTIC_RECONN_ADDR 0x2A03 /**< Reconnection Address Characteristic. */ -#define BLE_UUID_GAP_CHARACTERISTIC_PPCP 0x2A04 /**< Peripheral Preferred Connection Parameters Characteristic. */ -#define BLE_UUID_GAP_CHARACTERISTIC_CAR 0x2AA6 /**< Central Address Resolution Characteristic. */ -#define BLE_UUID_GAP_CHARACTERISTIC_RPA_ONLY 0x2AC9 /**< Resolvable Private Address Only Characteristic. */ -/** @} */ - - -/** @defgroup BLE_UUID_TYPES Types of UUID - * @{ */ -#define BLE_UUID_TYPE_UNKNOWN 0x00 /**< Invalid UUID type. */ -#define BLE_UUID_TYPE_BLE 0x01 /**< Bluetooth SIG UUID (16-bit). */ -#define BLE_UUID_TYPE_VENDOR_BEGIN 0x02 /**< Vendor UUID types start at this index (128-bit). */ -/** @} */ - - -/** @defgroup BLE_APPEARANCES Bluetooth Appearance values - * @note Retrieved from http://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.gap.appearance.xml - * @{ */ -#define BLE_APPEARANCE_UNKNOWN 0 /**< Unknown. */ -#define BLE_APPEARANCE_GENERIC_PHONE 64 /**< Generic Phone. */ -#define BLE_APPEARANCE_GENERIC_COMPUTER 128 /**< Generic Computer. */ -#define BLE_APPEARANCE_GENERIC_WATCH 192 /**< Generic Watch. */ -#define BLE_APPEARANCE_WATCH_SPORTS_WATCH 193 /**< Watch: Sports Watch. */ -#define BLE_APPEARANCE_GENERIC_CLOCK 256 /**< Generic Clock. */ -#define BLE_APPEARANCE_GENERIC_DISPLAY 320 /**< Generic Display. */ -#define BLE_APPEARANCE_GENERIC_REMOTE_CONTROL 384 /**< Generic Remote Control. */ -#define BLE_APPEARANCE_GENERIC_EYE_GLASSES 448 /**< Generic Eye-glasses. */ -#define BLE_APPEARANCE_GENERIC_TAG 512 /**< Generic Tag. */ -#define BLE_APPEARANCE_GENERIC_KEYRING 576 /**< Generic Keyring. */ -#define BLE_APPEARANCE_GENERIC_MEDIA_PLAYER 640 /**< Generic Media Player. */ -#define BLE_APPEARANCE_GENERIC_BARCODE_SCANNER 704 /**< Generic Barcode Scanner. */ -#define BLE_APPEARANCE_GENERIC_THERMOMETER 768 /**< Generic Thermometer. */ -#define BLE_APPEARANCE_THERMOMETER_EAR 769 /**< Thermometer: Ear. */ -#define BLE_APPEARANCE_GENERIC_HEART_RATE_SENSOR 832 /**< Generic Heart rate Sensor. */ -#define BLE_APPEARANCE_HEART_RATE_SENSOR_HEART_RATE_BELT 833 /**< Heart Rate Sensor: Heart Rate Belt. */ -#define BLE_APPEARANCE_GENERIC_BLOOD_PRESSURE 896 /**< Generic Blood Pressure. */ -#define BLE_APPEARANCE_BLOOD_PRESSURE_ARM 897 /**< Blood Pressure: Arm. */ -#define BLE_APPEARANCE_BLOOD_PRESSURE_WRIST 898 /**< Blood Pressure: Wrist. */ -#define BLE_APPEARANCE_GENERIC_HID 960 /**< Human Interface Device (HID). */ -#define BLE_APPEARANCE_HID_KEYBOARD 961 /**< Keyboard (HID Subtype). */ -#define BLE_APPEARANCE_HID_MOUSE 962 /**< Mouse (HID Subtype). */ -#define BLE_APPEARANCE_HID_JOYSTICK 963 /**< Joystick (HID Subtype). */ -#define BLE_APPEARANCE_HID_GAMEPAD 964 /**< Gamepad (HID Subtype). */ -#define BLE_APPEARANCE_HID_DIGITIZERSUBTYPE 965 /**< Digitizer Tablet (HID Subtype). */ -#define BLE_APPEARANCE_HID_CARD_READER 966 /**< Card Reader (HID Subtype). */ -#define BLE_APPEARANCE_HID_DIGITAL_PEN 967 /**< Digital Pen (HID Subtype). */ -#define BLE_APPEARANCE_HID_BARCODE 968 /**< Barcode Scanner (HID Subtype). */ -#define BLE_APPEARANCE_GENERIC_GLUCOSE_METER 1024 /**< Generic Glucose Meter. */ -#define BLE_APPEARANCE_GENERIC_RUNNING_WALKING_SENSOR 1088 /**< Generic Running Walking Sensor. */ -#define BLE_APPEARANCE_RUNNING_WALKING_SENSOR_IN_SHOE 1089 /**< Running Walking Sensor: In-Shoe. */ -#define BLE_APPEARANCE_RUNNING_WALKING_SENSOR_ON_SHOE 1090 /**< Running Walking Sensor: On-Shoe. */ -#define BLE_APPEARANCE_RUNNING_WALKING_SENSOR_ON_HIP 1091 /**< Running Walking Sensor: On-Hip. */ -#define BLE_APPEARANCE_GENERIC_CYCLING 1152 /**< Generic Cycling. */ -#define BLE_APPEARANCE_CYCLING_CYCLING_COMPUTER 1153 /**< Cycling: Cycling Computer. */ -#define BLE_APPEARANCE_CYCLING_SPEED_SENSOR 1154 /**< Cycling: Speed Sensor. */ -#define BLE_APPEARANCE_CYCLING_CADENCE_SENSOR 1155 /**< Cycling: Cadence Sensor. */ -#define BLE_APPEARANCE_CYCLING_POWER_SENSOR 1156 /**< Cycling: Power Sensor. */ -#define BLE_APPEARANCE_CYCLING_SPEED_CADENCE_SENSOR 1157 /**< Cycling: Speed and Cadence Sensor. */ -#define BLE_APPEARANCE_GENERIC_PULSE_OXIMETER 3136 /**< Generic Pulse Oximeter. */ -#define BLE_APPEARANCE_PULSE_OXIMETER_FINGERTIP 3137 /**< Fingertip (Pulse Oximeter subtype). */ -#define BLE_APPEARANCE_PULSE_OXIMETER_WRIST_WORN 3138 /**< Wrist Worn(Pulse Oximeter subtype). */ -#define BLE_APPEARANCE_GENERIC_WEIGHT_SCALE 3200 /**< Generic Weight Scale. */ -#define BLE_APPEARANCE_GENERIC_OUTDOOR_SPORTS_ACT 5184 /**< Generic Outdoor Sports Activity. */ -#define BLE_APPEARANCE_OUTDOOR_SPORTS_ACT_LOC_DISP 5185 /**< Location Display Device (Outdoor Sports Activity subtype). */ -#define BLE_APPEARANCE_OUTDOOR_SPORTS_ACT_LOC_AND_NAV_DISP 5186 /**< Location and Navigation Display Device (Outdoor Sports Activity subtype). */ -#define BLE_APPEARANCE_OUTDOOR_SPORTS_ACT_LOC_POD 5187 /**< Location Pod (Outdoor Sports Activity subtype). */ -#define BLE_APPEARANCE_OUTDOOR_SPORTS_ACT_LOC_AND_NAV_POD 5188 /**< Location and Navigation Pod (Outdoor Sports Activity subtype). */ -/** @} */ - -/** @brief Set .type and .uuid fields of ble_uuid_struct to specified UUID value. */ -#define BLE_UUID_BLE_ASSIGN(instance, value) do {\ - instance.type = BLE_UUID_TYPE_BLE; \ - instance.uuid = value;} while(0) - -/** @brief Copy type and uuid members from src to dst ble_uuid_t pointer. Both pointers must be valid/non-null. */ -#define BLE_UUID_COPY_PTR(dst, src) do {\ - (dst)->type = (src)->type; \ - (dst)->uuid = (src)->uuid;} while(0) - -/** @brief Copy type and uuid members from src to dst ble_uuid_t struct. */ -#define BLE_UUID_COPY_INST(dst, src) do {\ - (dst).type = (src).type; \ - (dst).uuid = (src).uuid;} while(0) - -/** @brief Compare for equality both type and uuid members of two (valid, non-null) ble_uuid_t pointers. */ -#define BLE_UUID_EQ(p_uuid1, p_uuid2) \ - (((p_uuid1)->type == (p_uuid2)->type) && ((p_uuid1)->uuid == (p_uuid2)->uuid)) - -/** @brief Compare for difference both type and uuid members of two (valid, non-null) ble_uuid_t pointers. */ -#define BLE_UUID_NEQ(p_uuid1, p_uuid2) \ - (((p_uuid1)->type != (p_uuid2)->type) || ((p_uuid1)->uuid != (p_uuid2)->uuid)) - -/** @} */ - -/** @addtogroup BLE_TYPES_STRUCTURES Structures - * @{ */ - -/** @brief 128 bit UUID values. */ -typedef struct -{ - uint8_t uuid128[16]; /**< Little-Endian UUID bytes. */ -} ble_uuid128_t; - -/** @brief Bluetooth Low Energy UUID type, encapsulates both 16-bit and 128-bit UUIDs. */ -typedef struct -{ - uint16_t uuid; /**< 16-bit UUID value or octets 12-13 of 128-bit UUID. */ - uint8_t type; /**< UUID type, see @ref BLE_UUID_TYPES. If type is @ref BLE_UUID_TYPE_UNKNOWN, the value of uuid is undefined. */ -} ble_uuid_t; - -/**@brief Data structure. */ -typedef struct -{ - uint8_t *p_data; /**< Pointer to the data buffer provided to/from the application. */ - uint16_t len; /**< Length of the data buffer, in bytes. */ -} ble_data_t; - -/** @} */ -#ifdef __cplusplus -} -#endif - -#endif /* BLE_TYPES_H__ */ - -/** - @} - @} -*/ diff --git a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf52/nrf_mbr.h b/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf52/nrf_mbr.h deleted file mode 100755 index 42e09fc8..00000000 --- a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf52/nrf_mbr.h +++ /dev/null @@ -1,268 +0,0 @@ -/* - * Copyright (c) 2014 - 2017, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - @defgroup nrf_mbr_api Master Boot Record API - @{ - - @brief APIs for updating SoftDevice and BootLoader - -*/ - -#ifndef NRF_MBR_H__ -#define NRF_MBR_H__ - -#include "nrf_svc.h" -#include <stdint.h> - -#ifdef __cplusplus -extern "C" { -#endif - -/** @addtogroup NRF_MBR_DEFINES Defines - * @{ */ - -/**@brief MBR SVC Base number. */ -#define MBR_SVC_BASE (0x18) - -/**@brief Page size in words. */ -#define MBR_PAGE_SIZE_IN_WORDS (1024) - -/** @brief The size that must be reserved for the MBR when a SoftDevice is written to flash. -This is the offset where the first byte of the SoftDevice hex file is written. */ -#define MBR_SIZE (0x1000) - -/** @brief Location (in the flash memory) of the bootloader address. */ -#define MBR_BOOTLOADER_ADDR (0xFF8) - -/** @brief Location (in UICR) of the bootloader address. */ -#define MBR_UICR_BOOTLOADER_ADDR (&(NRF_UICR->NRFFW[0])) - -/** @brief Location (in the flash memory) of the address of the MBR parameter page. */ -#define MBR_PARAM_PAGE_ADDR (0xFFC) - -/** @brief Location (in UICR) of the address of the MBR parameter page. */ -#define MBR_UICR_PARAM_PAGE_ADDR (&(NRF_UICR->NRFFW[1])) - - -/** @} */ - -/** @addtogroup NRF_MBR_ENUMS Enumerations - * @{ */ - -/**@brief nRF Master Boot Record API SVC numbers. */ -enum NRF_MBR_SVCS -{ - SD_MBR_COMMAND = MBR_SVC_BASE, /**< ::sd_mbr_command */ -}; - -/**@brief Possible values for ::sd_mbr_command_t.command */ -enum NRF_MBR_COMMANDS -{ - SD_MBR_COMMAND_COPY_BL, /**< Copy a new BootLoader. @see ::sd_mbr_command_copy_bl_t*/ - SD_MBR_COMMAND_COPY_SD, /**< Copy a new SoftDevice. @see ::sd_mbr_command_copy_sd_t*/ - SD_MBR_COMMAND_INIT_SD, /**< Initialize forwarding interrupts to SD, and run reset function in SD. Does not require any parameters in ::sd_mbr_command_t params.*/ - SD_MBR_COMMAND_COMPARE, /**< This command works like memcmp. @see ::sd_mbr_command_compare_t*/ - SD_MBR_COMMAND_VECTOR_TABLE_BASE_SET, /**< Change the address the MBR starts after a reset. @see ::sd_mbr_command_vector_table_base_set_t*/ - SD_MBR_COMMAND_RESERVED, - SD_MBR_COMMAND_IRQ_FORWARD_ADDRESS_SET, /**< Start forwarding all interrupts to this address. @see ::sd_mbr_command_irq_forward_address_set_t*/ -}; - -/** @} */ - -/** @addtogroup NRF_MBR_TYPES Types - * @{ */ - -/**@brief This command copies part of a new SoftDevice - * - * The destination area is erased before copying. - * If dst is in the middle of a flash page, that whole flash page will be erased. - * If (dst+len) is in the middle of a flash page, that whole flash page will be erased. - * - * The user of this function is responsible for setting the BPROT registers. - * - * @retval ::NRF_SUCCESS indicates that the contents of the memory blocks where copied correctly. - * @retval ::NRF_ERROR_INTERNAL indicates that the contents of the memory blocks where not verified correctly after copying. - */ -typedef struct -{ - uint32_t *src; /**< Pointer to the source of data to be copied.*/ - uint32_t *dst; /**< Pointer to the destination where the content is to be copied.*/ - uint32_t len; /**< Number of 32 bit words to copy. Must be a multiple of @ref MBR_PAGE_SIZE_IN_WORDS words.*/ -} sd_mbr_command_copy_sd_t; - - -/**@brief This command works like memcmp, but takes the length in words. - * - * @retval ::NRF_SUCCESS indicates that the contents of both memory blocks are equal. - * @retval ::NRF_ERROR_NULL indicates that the contents of the memory blocks are not equal. - */ -typedef struct -{ - uint32_t *ptr1; /**< Pointer to block of memory. */ - uint32_t *ptr2; /**< Pointer to block of memory. */ - uint32_t len; /**< Number of 32 bit words to compare.*/ -} sd_mbr_command_compare_t; - - -/**@brief This command copies a new BootLoader. - * - * The MBR assumes that either @ref MBR_BOOTLOADER_ADDR or @ref MBR_UICR_BOOTLOADER_ADDR is set to - * the address where the bootloader will be copied. If both addresses are set, the MBR will prioritize - * @ref MBR_BOOTLOADER_ADDR. - * - * The bootloader destination is erased by this function. - * If (destination+bl_len) is in the middle of a flash page, that whole flash page will be erased. - * - * This command requires that @ref MBR_PARAM_PAGE_ADDR or @ref MBR_UICR_PARAM_PAGE_ADDR is set, - * see @ref sd_mbr_command. - * - * This command will use the flash protect peripheral (BPROT or ACL) to protect the flash that is - * not intended to be written. - * - * On success, this function will not return. It will start the new bootloader from reset-vector as normal. - * - * @retval ::NRF_ERROR_INTERNAL indicates an internal error that should not happen. - * @retval ::NRF_ERROR_FORBIDDEN if the bootloader address is not set. - * @retval ::NRF_ERROR_INVALID_LENGTH if parameters attempts to read or write outside flash area. - * @retval ::NRF_ERROR_NO_MEM No MBR parameter page is provided. See @ref sd_mbr_command. - */ -typedef struct -{ - uint32_t *bl_src; /**< Pointer to the source of the bootloader to be be copied.*/ - uint32_t bl_len; /**< Number of 32 bit words to copy for BootLoader. */ -} sd_mbr_command_copy_bl_t; - -/**@brief Change the address the MBR starts after a reset - * - * Once this function has been called, this address is where the MBR will start to forward - * interrupts to after a reset. - * - * To restore default forwarding, this function should be called with @ref address set to 0. If a - * bootloader is present, interrupts will be forwarded to the bootloader. If not, interrupts will - * be forwarded to the SoftDevice. - * - * The location of a bootloader can be specified in @ref MBR_BOOTLOADER_ADDR or - * @ref MBR_UICR_BOOTLOADER_ADDR. If both addresses are set, the MBR will prioritize - * @ref MBR_BOOTLOADER_ADDR. - * - * This command requires that @ref MBR_PARAM_PAGE_ADDR or @ref MBR_UICR_PARAM_PAGE_ADDR is set, - * see @ref sd_mbr_command. - * - * On success, this function will not return. It will reset the device. - * - * @retval ::NRF_ERROR_INTERNAL indicates an internal error that should not happen. - * @retval ::NRF_ERROR_INVALID_ADDR if parameter address is outside of the flash size. - * @retval ::NRF_ERROR_NO_MEM No MBR parameter page is provided. See @ref sd_mbr_command. - */ -typedef struct -{ - uint32_t address; /**< The base address of the interrupt vector table for forwarded interrupts.*/ -} sd_mbr_command_vector_table_base_set_t; - -/**@brief Sets the base address of the interrupt vector table for interrupts forwarded from the MBR - * - * Unlike sd_mbr_command_vector_table_base_set_t, this function does not reset, and it does not - * change where the MBR starts after reset. - * - * @retval ::NRF_SUCCESS - */ -typedef struct -{ - uint32_t address; /**< The base address of the interrupt vector table for forwarded interrupts.*/ -} sd_mbr_command_irq_forward_address_set_t; - -/**@brief Input structure containing data used when calling ::sd_mbr_command - * - * Depending on what command value that is set, the corresponding params value type must also be - * set. See @ref NRF_MBR_COMMANDS for command types and corresponding params value type. If command - * @ref SD_MBR_COMMAND_INIT_SD is set, it is not necessary to set any values under params. - */ -typedef struct -{ - uint32_t command; /**< Type of command to be issued. See @ref NRF_MBR_COMMANDS. */ - union - { - sd_mbr_command_copy_sd_t copy_sd; /**< Parameters for copy SoftDevice.*/ - sd_mbr_command_compare_t compare; /**< Parameters for verify.*/ - sd_mbr_command_copy_bl_t copy_bl; /**< Parameters for copy BootLoader. Requires parameter page. */ - sd_mbr_command_vector_table_base_set_t base_set; /**< Parameters for vector table base set. Requires parameter page.*/ - sd_mbr_command_irq_forward_address_set_t irq_forward_address_set; /**< Parameters for irq forward address set*/ - } params; /**< Command parameters. */ -} sd_mbr_command_t; - -/** @} */ - -/** @addtogroup NRF_MBR_FUNCTIONS Functions - * @{ */ - -/**@brief Issue Master Boot Record commands - * - * Commands used when updating a SoftDevice and bootloader. - * - * The @ref SD_MBR_COMMAND_COPY_BL and @ref SD_MBR_COMMAND_VECTOR_TABLE_BASE_SET requires - * parameters to be retained by the MBR when resetting the IC. This is done in a separate flash - * page. The location of the flash page should be provided by the application in either - * @ref MBR_PARAM_PAGE_ADDR or @ref MBR_UICR_PARAM_PAGE_ADDR. If both addresses are set, the MBR - * will prioritize @ref MBR_PARAM_PAGE_ADDR. This page will be cleared by the MBR and is used to - * store the command before reset. When an address is specified, the page it refers to must not be - * used by the application. If no address is provided by the application, i.e. both - * @ref MBR_PARAM_PAGE_ADDR and @ref MBR_UICR_PARAM_PAGE_ADDR is 0xFFFFFFFF, MBR commands which use - * flash will be unavailable and return @ref NRF_ERROR_NO_MEM. - * - * @param[in] param Pointer to a struct describing the command. - * - * @note For a complete set of return values, see ::sd_mbr_command_copy_sd_t, - * ::sd_mbr_command_copy_bl_t, ::sd_mbr_command_compare_t, - * ::sd_mbr_command_vector_table_base_set_t, ::sd_mbr_command_irq_forward_address_set_t - * - * @retval ::NRF_ERROR_NO_MEM No MBR parameter page provided - * @retval ::NRF_ERROR_INVALID_PARAM if an invalid command is given. -*/ -SVCALL(SD_MBR_COMMAND, uint32_t, sd_mbr_command(sd_mbr_command_t* param)); - -/** @} */ - -#ifdef __cplusplus -} -#endif -#endif // NRF_MBR_H__ - -/** - @} -*/ diff --git a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_error.h b/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_error.h deleted file mode 100755 index 6badee98..00000000 --- a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_error.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Copyright (c) 2014 - 2017, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - - /** - @defgroup nrf_error SoftDevice Global Error Codes - @{ - - @brief Global Error definitions -*/ - -/* Header guard */ -#ifndef NRF_ERROR_H__ -#define NRF_ERROR_H__ - -#ifdef __cplusplus -extern "C" { -#endif - -/** @defgroup NRF_ERRORS_BASE Error Codes Base number definitions - * @{ */ -#define NRF_ERROR_BASE_NUM (0x0) ///< Global error base -#define NRF_ERROR_SDM_BASE_NUM (0x1000) ///< SDM error base -#define NRF_ERROR_SOC_BASE_NUM (0x2000) ///< SoC error base -#define NRF_ERROR_STK_BASE_NUM (0x3000) ///< STK error base -/** @} */ - -#define NRF_SUCCESS (NRF_ERROR_BASE_NUM + 0) ///< Successful command -#define NRF_ERROR_SVC_HANDLER_MISSING (NRF_ERROR_BASE_NUM + 1) ///< SVC handler is missing -#define NRF_ERROR_SOFTDEVICE_NOT_ENABLED (NRF_ERROR_BASE_NUM + 2) ///< SoftDevice has not been enabled -#define NRF_ERROR_INTERNAL (NRF_ERROR_BASE_NUM + 3) ///< Internal Error -#define NRF_ERROR_NO_MEM (NRF_ERROR_BASE_NUM + 4) ///< No Memory for operation -#define NRF_ERROR_NOT_FOUND (NRF_ERROR_BASE_NUM + 5) ///< Not found -#define NRF_ERROR_NOT_SUPPORTED (NRF_ERROR_BASE_NUM + 6) ///< Not supported -#define NRF_ERROR_INVALID_PARAM (NRF_ERROR_BASE_NUM + 7) ///< Invalid Parameter -#define NRF_ERROR_INVALID_STATE (NRF_ERROR_BASE_NUM + 8) ///< Invalid state, operation disallowed in this state -#define NRF_ERROR_INVALID_LENGTH (NRF_ERROR_BASE_NUM + 9) ///< Invalid Length -#define NRF_ERROR_INVALID_FLAGS (NRF_ERROR_BASE_NUM + 10) ///< Invalid Flags -#define NRF_ERROR_INVALID_DATA (NRF_ERROR_BASE_NUM + 11) ///< Invalid Data -#define NRF_ERROR_DATA_SIZE (NRF_ERROR_BASE_NUM + 12) ///< Invalid Data size -#define NRF_ERROR_TIMEOUT (NRF_ERROR_BASE_NUM + 13) ///< Operation timed out -#define NRF_ERROR_NULL (NRF_ERROR_BASE_NUM + 14) ///< Null Pointer -#define NRF_ERROR_FORBIDDEN (NRF_ERROR_BASE_NUM + 15) ///< Forbidden Operation -#define NRF_ERROR_INVALID_ADDR (NRF_ERROR_BASE_NUM + 16) ///< Bad Memory Address -#define NRF_ERROR_BUSY (NRF_ERROR_BASE_NUM + 17) ///< Busy -#define NRF_ERROR_CONN_COUNT (NRF_ERROR_BASE_NUM + 18) ///< Maximum connection count exceeded. -#define NRF_ERROR_RESOURCES (NRF_ERROR_BASE_NUM + 19) ///< Not enough resources for operation - -#ifdef __cplusplus -} -#endif -#endif // NRF_ERROR_H__ - -/** - @} -*/ diff --git a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_error_sdm.h b/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_error_sdm.h deleted file mode 100755 index 530959b9..00000000 --- a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_error_sdm.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Copyright (c) 2012 - 2017, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - - /** - @addtogroup nrf_sdm_api - @{ - @defgroup nrf_sdm_error SoftDevice Manager Error Codes - @{ - - @brief Error definitions for the SDM API -*/ - -/* Header guard */ -#ifndef NRF_ERROR_SDM_H__ -#define NRF_ERROR_SDM_H__ - -#include "nrf_error.h" - -#ifdef __cplusplus -extern "C" { -#endif - -#define NRF_ERROR_SDM_LFCLK_SOURCE_UNKNOWN (NRF_ERROR_SDM_BASE_NUM + 0) ///< Unknown LFCLK source. -#define NRF_ERROR_SDM_INCORRECT_INTERRUPT_CONFIGURATION (NRF_ERROR_SDM_BASE_NUM + 1) ///< Incorrect interrupt configuration (can be caused by using illegal priority levels, or having enabled SoftDevice interrupts). -#define NRF_ERROR_SDM_INCORRECT_CLENR0 (NRF_ERROR_SDM_BASE_NUM + 2) ///< Incorrect CLENR0 (can be caused by erroneous SoftDevice flashing). - -#ifdef __cplusplus -} -#endif -#endif // NRF_ERROR_SDM_H__ - -/** - @} - @} -*/ diff --git a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_error_soc.h b/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_error_soc.h deleted file mode 100755 index 1e784b8d..00000000 --- a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_error_soc.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Copyright (c) 2012 - 2017, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - @addtogroup nrf_soc_api - @{ - @defgroup nrf_soc_error SoC Library Error Codes - @{ - - @brief Error definitions for the SoC library - -*/ - -/* Header guard */ -#ifndef NRF_ERROR_SOC_H__ -#define NRF_ERROR_SOC_H__ - -#include "nrf_error.h" -#ifdef __cplusplus -extern "C" { -#endif - -/* Mutex Errors */ -#define NRF_ERROR_SOC_MUTEX_ALREADY_TAKEN (NRF_ERROR_SOC_BASE_NUM + 0) ///< Mutex already taken - -/* NVIC errors */ -#define NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE (NRF_ERROR_SOC_BASE_NUM + 1) ///< NVIC interrupt not available -#define NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED (NRF_ERROR_SOC_BASE_NUM + 2) ///< NVIC interrupt priority not allowed -#define NRF_ERROR_SOC_NVIC_SHOULD_NOT_RETURN (NRF_ERROR_SOC_BASE_NUM + 3) ///< NVIC should not return - -/* Power errors */ -#define NRF_ERROR_SOC_POWER_MODE_UNKNOWN (NRF_ERROR_SOC_BASE_NUM + 4) ///< Power mode unknown -#define NRF_ERROR_SOC_POWER_POF_THRESHOLD_UNKNOWN (NRF_ERROR_SOC_BASE_NUM + 5) ///< Power POF threshold unknown -#define NRF_ERROR_SOC_POWER_OFF_SHOULD_NOT_RETURN (NRF_ERROR_SOC_BASE_NUM + 6) ///< Power off should not return - -/* Rand errors */ -#define NRF_ERROR_SOC_RAND_NOT_ENOUGH_VALUES (NRF_ERROR_SOC_BASE_NUM + 7) ///< RAND not enough values - -/* PPI errors */ -#define NRF_ERROR_SOC_PPI_INVALID_CHANNEL (NRF_ERROR_SOC_BASE_NUM + 8) ///< Invalid PPI Channel -#define NRF_ERROR_SOC_PPI_INVALID_GROUP (NRF_ERROR_SOC_BASE_NUM + 9) ///< Invalid PPI Group - -#ifdef __cplusplus -} -#endif -#endif // NRF_ERROR_SOC_H__ -/** - @} - @} -*/ diff --git a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_nvic.h b/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_nvic.h deleted file mode 100755 index 1f79cc3c..00000000 --- a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_nvic.h +++ /dev/null @@ -1,491 +0,0 @@ -/* - * Copyright (c) 2016 - 2018, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * @defgroup nrf_nvic_api SoftDevice NVIC API - * @{ - * - * @note In order to use this module, the following code has to be added to a .c file: - * \code - * nrf_nvic_state_t nrf_nvic_state = {0}; - * \endcode - * - * @note Definitions and declarations starting with __ (double underscore) in this header file are - * not intended for direct use by the application. - * - * @brief APIs for the accessing NVIC when using a SoftDevice. - * - */ - -#ifndef NRF_NVIC_H__ -#define NRF_NVIC_H__ - -#include <stdint.h> -#include "nrf.h" -#include "nrf_svc.h" -#include "nrf_error.h" -#include "nrf_error_soc.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/**@addtogroup NRF_NVIC_DEFINES Defines - * @{ */ - -/**@defgroup NRF_NVIC_ISER_DEFINES SoftDevice NVIC internal definitions - * @{ */ - -#define __NRF_NVIC_NVMC_IRQn (30) /**< The peripheral ID of the NVMC. IRQ numbers are used to identify peripherals, but the NVMC doesn't have an IRQ number in the MDK. */ - -#define __NRF_NVIC_ISER_COUNT (2) /**< The number of ISER/ICER registers in the NVIC that are used. */ - -/**@brief Interrupt priority levels used by the SoftDevice. */ -#define __NRF_NVIC_SD_IRQ_PRIOS ((uint8_t)( \ - (1U << 0) /**< Priority level high .*/ \ - | (1U << 1) /**< Priority level medium. */ \ - | (1U << 4) /**< Priority level low. */ \ - )) - -/**@brief Interrupt priority levels available to the application. */ -#define __NRF_NVIC_APP_IRQ_PRIOS ((uint8_t)~__NRF_NVIC_SD_IRQ_PRIOS) - -/**@brief Interrupts used by the SoftDevice, with IRQn in the range 0-31. */ -#define __NRF_NVIC_SD_IRQS_0 ((uint32_t)( \ - (1U << POWER_CLOCK_IRQn) \ - | (1U << RADIO_IRQn) \ - | (1U << RTC0_IRQn) \ - | (1U << TIMER0_IRQn) \ - | (1U << RNG_IRQn) \ - | (1U << ECB_IRQn) \ - | (1U << CCM_AAR_IRQn) \ - | (1U << TEMP_IRQn) \ - | (1U << __NRF_NVIC_NVMC_IRQn) \ - | (1U << (uint32_t)SWI5_IRQn) \ - )) - -/**@brief Interrupts used by the SoftDevice, with IRQn in the range 32-63. */ -#define __NRF_NVIC_SD_IRQS_1 ((uint32_t)0) - -/**@brief Interrupts available for to application, with IRQn in the range 0-31. */ -#define __NRF_NVIC_APP_IRQS_0 (~__NRF_NVIC_SD_IRQS_0) - -/**@brief Interrupts available for to application, with IRQn in the range 32-63. */ -#define __NRF_NVIC_APP_IRQS_1 (~__NRF_NVIC_SD_IRQS_1) - -/**@} */ - -/**@} */ - -/**@addtogroup NRF_NVIC_VARIABLES Variables - * @{ */ - -/**@brief Type representing the state struct for the SoftDevice NVIC module. */ -typedef struct -{ - uint32_t volatile __irq_masks[__NRF_NVIC_ISER_COUNT]; /**< IRQs enabled by the application in the NVIC. */ - uint32_t volatile __cr_flag; /**< Non-zero if already in a critical region */ -} nrf_nvic_state_t; - -/**@brief Variable keeping the state for the SoftDevice NVIC module. This must be declared in an - * application source file. */ -extern nrf_nvic_state_t nrf_nvic_state; - -/**@} */ - -/**@addtogroup NRF_NVIC_INTERNAL_FUNCTIONS SoftDevice NVIC internal functions - * @{ */ - -/**@brief Disables IRQ interrupts globally, including the SoftDevice's interrupts. - * - * @retval The value of PRIMASK prior to disabling the interrupts. - */ -__STATIC_INLINE int __sd_nvic_irq_disable(void); - -/**@brief Enables IRQ interrupts globally, including the SoftDevice's interrupts. - */ -__STATIC_INLINE void __sd_nvic_irq_enable(void); - -/**@brief Checks if IRQn is available to application - * @param[in] IRQn IRQ to check - * - * @retval 1 (true) if the IRQ to check is available to the application - */ -__STATIC_INLINE uint32_t __sd_nvic_app_accessible_irq(IRQn_Type IRQn); - -/**@brief Checks if priority is available to application - * @param[in] priority priority to check - * - * @retval 1 (true) if the priority to check is available to the application - */ -__STATIC_INLINE uint32_t __sd_nvic_is_app_accessible_priority(uint32_t priority); - -/**@} */ - -/**@addtogroup NRF_NVIC_FUNCTIONS SoftDevice NVIC public functions - * @{ */ - -/**@brief Enable External Interrupt. - * @note Corresponds to NVIC_EnableIRQ in CMSIS. - * - * @pre IRQn is valid and not reserved by the stack. - * - * @param[in] IRQn See the NVIC_EnableIRQ documentation in CMSIS. - * - * @retval ::NRF_SUCCESS The interrupt was enabled. - * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE The interrupt is not available for the application. - * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED The interrupt has a priority not available for the application. - */ -__STATIC_INLINE uint32_t sd_nvic_EnableIRQ(IRQn_Type IRQn); - -/**@brief Disable External Interrupt. - * @note Corresponds to NVIC_DisableIRQ in CMSIS. - * - * @pre IRQn is valid and not reserved by the stack. - * - * @param[in] IRQn See the NVIC_DisableIRQ documentation in CMSIS. - * - * @retval ::NRF_SUCCESS The interrupt was disabled. - * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE The interrupt is not available for the application. - */ -__STATIC_INLINE uint32_t sd_nvic_DisableIRQ(IRQn_Type IRQn); - -/**@brief Get Pending Interrupt. - * @note Corresponds to NVIC_GetPendingIRQ in CMSIS. - * - * @pre IRQn is valid and not reserved by the stack. - * - * @param[in] IRQn See the NVIC_GetPendingIRQ documentation in CMSIS. - * @param[out] p_pending_irq Return value from NVIC_GetPendingIRQ. - * - * @retval ::NRF_SUCCESS The interrupt is available for the application. - * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application. - */ -__STATIC_INLINE uint32_t sd_nvic_GetPendingIRQ(IRQn_Type IRQn, uint32_t * p_pending_irq); - -/**@brief Set Pending Interrupt. - * @note Corresponds to NVIC_SetPendingIRQ in CMSIS. - * - * @pre IRQn is valid and not reserved by the stack. - * - * @param[in] IRQn See the NVIC_SetPendingIRQ documentation in CMSIS. - * - * @retval ::NRF_SUCCESS The interrupt is set pending. - * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application. - */ -__STATIC_INLINE uint32_t sd_nvic_SetPendingIRQ(IRQn_Type IRQn); - -/**@brief Clear Pending Interrupt. - * @note Corresponds to NVIC_ClearPendingIRQ in CMSIS. - * - * @pre IRQn is valid and not reserved by the stack. - * - * @param[in] IRQn See the NVIC_ClearPendingIRQ documentation in CMSIS. - * - * @retval ::NRF_SUCCESS The interrupt pending flag is cleared. - * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application. - */ -__STATIC_INLINE uint32_t sd_nvic_ClearPendingIRQ(IRQn_Type IRQn); - -/**@brief Set Interrupt Priority. - * @note Corresponds to NVIC_SetPriority in CMSIS. - * - * @pre IRQn is valid and not reserved by the stack. - * @pre Priority is valid and not reserved by the stack. - * - * @param[in] IRQn See the NVIC_SetPriority documentation in CMSIS. - * @param[in] priority A valid IRQ priority for use by the application. - * - * @retval ::NRF_SUCCESS The interrupt and priority level is available for the application. - * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application. - * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED The interrupt priority is not available for the application. - */ -__STATIC_INLINE uint32_t sd_nvic_SetPriority(IRQn_Type IRQn, uint32_t priority); - -/**@brief Get Interrupt Priority. - * @note Corresponds to NVIC_GetPriority in CMSIS. - * - * @pre IRQn is valid and not reserved by the stack. - * - * @param[in] IRQn See the NVIC_GetPriority documentation in CMSIS. - * @param[out] p_priority Return value from NVIC_GetPriority. - * - * @retval ::NRF_SUCCESS The interrupt priority is returned in p_priority. - * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE - IRQn is not available for the application. - */ -__STATIC_INLINE uint32_t sd_nvic_GetPriority(IRQn_Type IRQn, uint32_t * p_priority); - -/**@brief System Reset. - * @note Corresponds to NVIC_SystemReset in CMSIS. - * - * @retval ::NRF_ERROR_SOC_NVIC_SHOULD_NOT_RETURN - */ -__STATIC_INLINE uint32_t sd_nvic_SystemReset(void); - -/**@brief Enter critical region. - * - * @post Application interrupts will be disabled. - * @note sd_nvic_critical_region_enter() and ::sd_nvic_critical_region_exit() must be called in matching pairs inside each - * execution context - * @sa sd_nvic_critical_region_exit - * - * @param[out] p_is_nested_critical_region If 1, the application is now in a nested critical region. - * - * @retval ::NRF_SUCCESS - */ -__STATIC_INLINE uint32_t sd_nvic_critical_region_enter(uint8_t * p_is_nested_critical_region); - -/**@brief Exit critical region. - * - * @pre Application has entered a critical region using ::sd_nvic_critical_region_enter. - * @post If not in a nested critical region, the application interrupts will restored to the state before ::sd_nvic_critical_region_enter was called. - * - * @param[in] is_nested_critical_region If this is set to 1, the critical region won't be exited. @sa sd_nvic_critical_region_enter. - * - * @retval ::NRF_SUCCESS - */ -__STATIC_INLINE uint32_t sd_nvic_critical_region_exit(uint8_t is_nested_critical_region); - -/**@} */ - -#ifndef SUPPRESS_INLINE_IMPLEMENTATION - -__STATIC_INLINE int __sd_nvic_irq_disable(void) -{ - int pm = __get_PRIMASK(); - __disable_irq(); - return pm; -} - -__STATIC_INLINE void __sd_nvic_irq_enable(void) -{ - __enable_irq(); -} - -__STATIC_INLINE uint32_t __sd_nvic_app_accessible_irq(IRQn_Type IRQn) -{ - if (IRQn < 32) - { - return ((1UL<<IRQn) & __NRF_NVIC_APP_IRQS_0) != 0; - } - else if (IRQn < 64) - { - return ((1UL<<(IRQn-32)) & __NRF_NVIC_APP_IRQS_1) != 0; - } - else - { - return 1; - } -} - -__STATIC_INLINE uint32_t __sd_nvic_is_app_accessible_priority(uint32_t priority) -{ - if( (priority >= (1 << __NVIC_PRIO_BITS)) - || (((1 << priority) & __NRF_NVIC_APP_IRQ_PRIOS) == 0) - ) - { - return 0; - } - return 1; -} - - -__STATIC_INLINE uint32_t sd_nvic_EnableIRQ(IRQn_Type IRQn) -{ - if (!__sd_nvic_app_accessible_irq(IRQn)) - { - return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE; - } - if (!__sd_nvic_is_app_accessible_priority(NVIC_GetPriority(IRQn))) - { - return NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED; - } - - if (nrf_nvic_state.__cr_flag) - { - nrf_nvic_state.__irq_masks[(uint32_t)((int32_t)IRQn) >> 5] |= (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); - } - else - { - NVIC_EnableIRQ(IRQn); - } - return NRF_SUCCESS; -} - -__STATIC_INLINE uint32_t sd_nvic_DisableIRQ(IRQn_Type IRQn) -{ - if (!__sd_nvic_app_accessible_irq(IRQn)) - { - return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE; - } - - if (nrf_nvic_state.__cr_flag) - { - nrf_nvic_state.__irq_masks[(uint32_t)((int32_t)IRQn) >> 5] &= ~(1UL << ((uint32_t)(IRQn) & 0x1F)); - } - else - { - NVIC_DisableIRQ(IRQn); - } - - return NRF_SUCCESS; -} - -__STATIC_INLINE uint32_t sd_nvic_GetPendingIRQ(IRQn_Type IRQn, uint32_t * p_pending_irq) -{ - if (__sd_nvic_app_accessible_irq(IRQn)) - { - *p_pending_irq = NVIC_GetPendingIRQ(IRQn); - return NRF_SUCCESS; - } - else - { - return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE; - } -} - -__STATIC_INLINE uint32_t sd_nvic_SetPendingIRQ(IRQn_Type IRQn) -{ - if (__sd_nvic_app_accessible_irq(IRQn)) - { - NVIC_SetPendingIRQ(IRQn); - return NRF_SUCCESS; - } - else - { - return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE; - } -} - -__STATIC_INLINE uint32_t sd_nvic_ClearPendingIRQ(IRQn_Type IRQn) -{ - if (__sd_nvic_app_accessible_irq(IRQn)) - { - NVIC_ClearPendingIRQ(IRQn); - return NRF_SUCCESS; - } - else - { - return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE; - } -} - -__STATIC_INLINE uint32_t sd_nvic_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if (!__sd_nvic_app_accessible_irq(IRQn)) - { - return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE; - } - - if (!__sd_nvic_is_app_accessible_priority(priority)) - { - return NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED; - } - - NVIC_SetPriority(IRQn, (uint32_t)priority); - return NRF_SUCCESS; -} - -__STATIC_INLINE uint32_t sd_nvic_GetPriority(IRQn_Type IRQn, uint32_t * p_priority) -{ - if (__sd_nvic_app_accessible_irq(IRQn)) - { - *p_priority = (NVIC_GetPriority(IRQn) & 0xFF); - return NRF_SUCCESS; - } - else - { - return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE; - } -} - -__STATIC_INLINE uint32_t sd_nvic_SystemReset(void) -{ - NVIC_SystemReset(); - return NRF_ERROR_SOC_NVIC_SHOULD_NOT_RETURN; -} - -__STATIC_INLINE uint32_t sd_nvic_critical_region_enter(uint8_t * p_is_nested_critical_region) -{ - int was_masked = __sd_nvic_irq_disable(); - if (!nrf_nvic_state.__cr_flag) - { - nrf_nvic_state.__cr_flag = 1; - nrf_nvic_state.__irq_masks[0] = ( NVIC->ICER[0] & __NRF_NVIC_APP_IRQS_0 ); - NVIC->ICER[0] = __NRF_NVIC_APP_IRQS_0; - nrf_nvic_state.__irq_masks[1] = ( NVIC->ICER[1] & __NRF_NVIC_APP_IRQS_1 ); - NVIC->ICER[1] = __NRF_NVIC_APP_IRQS_1; - *p_is_nested_critical_region = 0; - } - else - { - *p_is_nested_critical_region = 1; - } - if (!was_masked) - { - __sd_nvic_irq_enable(); - } - return NRF_SUCCESS; -} - -__STATIC_INLINE uint32_t sd_nvic_critical_region_exit(uint8_t is_nested_critical_region) -{ - if (nrf_nvic_state.__cr_flag && (is_nested_critical_region == 0)) - { - int was_masked = __sd_nvic_irq_disable(); - NVIC->ISER[0] = nrf_nvic_state.__irq_masks[0]; - NVIC->ISER[1] = nrf_nvic_state.__irq_masks[1]; - nrf_nvic_state.__cr_flag = 0; - if (!was_masked) - { - __sd_nvic_irq_enable(); - } - } - - return NRF_SUCCESS; -} - -#endif /* SUPPRESS_INLINE_IMPLEMENTATION */ - -#ifdef __cplusplus -} -#endif - -#endif // NRF_NVIC_H__ - -/**@} */ diff --git a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_sdm.h b/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_sdm.h deleted file mode 100755 index 5dfbb287..00000000 --- a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_sdm.h +++ /dev/null @@ -1,367 +0,0 @@ -/* - * Copyright (c) 2015 - 2018, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - @defgroup nrf_sdm_api SoftDevice Manager API - @{ - - @brief APIs for SoftDevice management. - -*/ - -#ifndef NRF_SDM_H__ -#define NRF_SDM_H__ - -#include <stdint.h> -#include "nrf.h" -#include "nrf_svc.h" -#include "nrf_error.h" -#include "nrf_error_sdm.h" -#include "nrf_soc.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/** @addtogroup NRF_SDM_DEFINES Defines - * @{ */ -#ifdef NRFSOC_DOXYGEN -/// Declared in nrf_mbr.h -#define MBR_SIZE 0 -#warning test -#endif - -/** @brief The major version for the SoftDevice binary distributed with this header file. */ -#define SD_MAJOR_VERSION (6) - -/** @brief The minor version for the SoftDevice binary distributed with this header file. */ -#define SD_MINOR_VERSION (1) - -/** @brief The bugfix version for the SoftDevice binary distributed with this header file. */ -#define SD_BUGFIX_VERSION (1) - -/** @brief The SoftDevice variant of this firmware. */ -#define SD_VARIANT_ID 140 - -/** @brief The full version number for the SoftDevice binary this header file was distributed - * with, as a decimal number in the form Mmmmbbb, where: - * - M is major version (one or more digits) - * - mmm is minor version (three digits) - * - bbb is bugfix version (three digits). */ -#define SD_VERSION (SD_MAJOR_VERSION * 1000000 + SD_MINOR_VERSION * 1000 + SD_BUGFIX_VERSION) - -/** @brief SoftDevice Manager SVC Base number. */ -#define SDM_SVC_BASE 0x10 - -/** @brief SoftDevice unique string size in bytes. */ -#define SD_UNIQUE_STR_SIZE 20 - -/** @brief Invalid info field. Returned when an info field does not exist. */ -#define SDM_INFO_FIELD_INVALID (0) - -/** @brief Defines the SoftDevice Information Structure location (address) as an offset from -the start of the SoftDevice (without MBR)*/ -#define SOFTDEVICE_INFO_STRUCT_OFFSET (0x2000) - -/** @brief Defines the absolute SoftDevice Information Structure location (address) when the - * SoftDevice is installed just above the MBR (the usual case). */ -#define SOFTDEVICE_INFO_STRUCT_ADDRESS (SOFTDEVICE_INFO_STRUCT_OFFSET + MBR_SIZE) - -/** @brief Defines the offset for the SoftDevice Information Structure size value relative to the - * SoftDevice base address. The size value is of type uint8_t. */ -#define SD_INFO_STRUCT_SIZE_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET) - -/** @brief Defines the offset for the SoftDevice size value relative to the SoftDevice base address. - * The size value is of type uint32_t. */ -#define SD_SIZE_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET + 0x08) - -/** @brief Defines the offset for FWID value relative to the SoftDevice base address. The FWID value - * is of type uint16_t. */ -#define SD_FWID_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET + 0x0C) - -/** @brief Defines the offset for the SoftDevice ID relative to the SoftDevice base address. The ID - * is of type uint32_t. */ -#define SD_ID_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET + 0x10) - -/** @brief Defines the offset for the SoftDevice version relative to the SoftDevice base address in - * the same format as @ref SD_VERSION, stored as an uint32_t. */ -#define SD_VERSION_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET + 0x14) - -/** @brief Defines the offset for the SoftDevice unique string relative to the SoftDevice base address. - * The SD_UNIQUE_STR is stored as an array of uint8_t. The size of array is @ref SD_UNIQUE_STR_SIZE. - */ -#define SD_UNIQUE_STR_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET + 0x18) - -/** @brief Defines a macro for retrieving the actual SoftDevice Information Structure size value - * from a given base address. Use @ref MBR_SIZE as the argument when the SoftDevice is - * installed just above the MBR (the usual case). */ -#define SD_INFO_STRUCT_SIZE_GET(baseaddr) (*((uint8_t *) ((baseaddr) + SD_INFO_STRUCT_SIZE_OFFSET))) - -/** @brief Defines a macro for retrieving the actual SoftDevice size value from a given base - * address. Use @ref MBR_SIZE as the argument when the SoftDevice is installed just above - * the MBR (the usual case). */ -#define SD_SIZE_GET(baseaddr) (*((uint32_t *) ((baseaddr) + SD_SIZE_OFFSET))) - -/** @brief Defines the amount of flash that is used by the SoftDevice. - * Add @ref MBR_SIZE to find the first available flash address when the SoftDevice is installed - * just above the MBR (the usual case). - */ -#define SD_FLASH_SIZE 0x25000 - -/** @brief Defines a macro for retrieving the actual FWID value from a given base address. Use - * @ref MBR_SIZE as the argument when the SoftDevice is installed just above the MBR (the usual - * case). */ -#define SD_FWID_GET(baseaddr) (*((uint16_t *) ((baseaddr) + SD_FWID_OFFSET))) - -/** @brief Defines a macro for retrieving the actual SoftDevice ID from a given base address. Use - * @ref MBR_SIZE as the argument when the SoftDevice is installed just above the MBR (the - * usual case). */ -#define SD_ID_GET(baseaddr) ((SD_INFO_STRUCT_SIZE_GET(baseaddr) > (SD_ID_OFFSET - SOFTDEVICE_INFO_STRUCT_OFFSET)) \ - ? (*((uint32_t *) ((baseaddr) + SD_ID_OFFSET))) : SDM_INFO_FIELD_INVALID) - -/** @brief Defines a macro for retrieving the actual SoftDevice version from a given base address. - * Use @ref MBR_SIZE as the argument when the SoftDevice is installed just above the MBR - * (the usual case). */ -#define SD_VERSION_GET(baseaddr) ((SD_INFO_STRUCT_SIZE_GET(baseaddr) > (SD_VERSION_OFFSET - SOFTDEVICE_INFO_STRUCT_OFFSET)) \ - ? (*((uint32_t *) ((baseaddr) + SD_VERSION_OFFSET))) : SDM_INFO_FIELD_INVALID) - -/** @brief Defines a macro for retrieving the address of SoftDevice unique str based on a given base address. - * Use @ref MBR_SIZE as the argument when the SoftDevice is installed just above the MBR - * (the usual case). */ -#define SD_UNIQUE_STR_ADDR_GET(baseaddr) ((SD_INFO_STRUCT_SIZE_GET(baseaddr) > (SD_UNIQUE_STR_OFFSET - SOFTDEVICE_INFO_STRUCT_OFFSET)) \ - ? (((uint8_t *) ((baseaddr) + SD_UNIQUE_STR_OFFSET))) : SDM_INFO_FIELD_INVALID) - -/**@defgroup NRF_FAULT_ID_RANGES Fault ID ranges - * @{ */ -#define NRF_FAULT_ID_SD_RANGE_START 0x00000000 /**< SoftDevice ID range start. */ -#define NRF_FAULT_ID_APP_RANGE_START 0x00001000 /**< Application ID range start. */ -/**@} */ - -/**@defgroup NRF_FAULT_IDS Fault ID types - * @{ */ -#define NRF_FAULT_ID_SD_ASSERT (NRF_FAULT_ID_SD_RANGE_START + 1) /**< SoftDevice assertion. The info parameter is reserved for future used. */ -#define NRF_FAULT_ID_APP_MEMACC (NRF_FAULT_ID_APP_RANGE_START + 1) /**< Application invalid memory access. The info parameter will contain 0x00000000, - in case of SoftDevice RAM access violation. In case of SoftDevice peripheral - register violation the info parameter will contain the sub-region number of - PREGION[0], on whose address range the disallowed write access caused the - memory access fault. */ -/**@} */ - -/** @} */ - -/** @addtogroup NRF_SDM_ENUMS Enumerations - * @{ */ - -/**@brief nRF SoftDevice Manager API SVC numbers. */ -enum NRF_SD_SVCS -{ - SD_SOFTDEVICE_ENABLE = SDM_SVC_BASE, /**< ::sd_softdevice_enable */ - SD_SOFTDEVICE_DISABLE, /**< ::sd_softdevice_disable */ - SD_SOFTDEVICE_IS_ENABLED, /**< ::sd_softdevice_is_enabled */ - SD_SOFTDEVICE_VECTOR_TABLE_BASE_SET, /**< ::sd_softdevice_vector_table_base_set */ - SVC_SDM_LAST /**< Placeholder for last SDM SVC */ -}; - -/** @} */ - -/** @addtogroup NRF_SDM_DEFINES Defines - * @{ */ - -/**@defgroup NRF_CLOCK_LF_ACCURACY Clock accuracy - * @{ */ - -#define NRF_CLOCK_LF_ACCURACY_250_PPM (0) /**< Default: 250 ppm */ -#define NRF_CLOCK_LF_ACCURACY_500_PPM (1) /**< 500 ppm */ -#define NRF_CLOCK_LF_ACCURACY_150_PPM (2) /**< 150 ppm */ -#define NRF_CLOCK_LF_ACCURACY_100_PPM (3) /**< 100 ppm */ -#define NRF_CLOCK_LF_ACCURACY_75_PPM (4) /**< 75 ppm */ -#define NRF_CLOCK_LF_ACCURACY_50_PPM (5) /**< 50 ppm */ -#define NRF_CLOCK_LF_ACCURACY_30_PPM (6) /**< 30 ppm */ -#define NRF_CLOCK_LF_ACCURACY_20_PPM (7) /**< 20 ppm */ -#define NRF_CLOCK_LF_ACCURACY_10_PPM (8) /**< 10 ppm */ -#define NRF_CLOCK_LF_ACCURACY_5_PPM (9) /**< 5 ppm */ -#define NRF_CLOCK_LF_ACCURACY_2_PPM (10) /**< 2 ppm */ -#define NRF_CLOCK_LF_ACCURACY_1_PPM (11) /**< 1 ppm */ - -/** @} */ - -/**@defgroup NRF_CLOCK_LF_SRC Possible LFCLK oscillator sources - * @{ */ - -#define NRF_CLOCK_LF_SRC_RC (0) /**< LFCLK RC oscillator. */ -#define NRF_CLOCK_LF_SRC_XTAL (1) /**< LFCLK crystal oscillator. */ -#define NRF_CLOCK_LF_SRC_SYNTH (2) /**< LFCLK Synthesized from HFCLK. */ - -/** @} */ - -/** @} */ - -/** @addtogroup NRF_SDM_TYPES Types - * @{ */ - -/**@brief Type representing LFCLK oscillator source. */ -typedef struct -{ - uint8_t source; /**< LF oscillator clock source, see @ref NRF_CLOCK_LF_SRC. */ - uint8_t rc_ctiv; /**< Only for ::NRF_CLOCK_LF_SRC_RC: Calibration timer interval in 1/4 second - units (nRF52: 1-32). - @note To avoid excessive clock drift, 0.5 degrees Celsius is the - maximum temperature change allowed in one calibration timer - interval. The interval should be selected to ensure this. - - @note Must be 0 if source is not ::NRF_CLOCK_LF_SRC_RC. */ - uint8_t rc_temp_ctiv; /**< Only for ::NRF_CLOCK_LF_SRC_RC: How often (in number of calibration - intervals) the RC oscillator shall be calibrated if the temperature - hasn't changed. - 0: Always calibrate even if the temperature hasn't changed. - 1: Only calibrate if the temperature has changed (legacy - nRF51 only). - 2-33: Check the temperature and only calibrate if it has changed, - however calibration will take place every rc_temp_ctiv - intervals in any case. - - @note Must be 0 if source is not ::NRF_CLOCK_LF_SRC_RC. - - @note For nRF52, the application must ensure calibration at least once - every 8 seconds to ensure +/-500 ppm clock stability. The - recommended configuration for ::NRF_CLOCK_LF_SRC_RC on nRF52 is - rc_ctiv=16 and rc_temp_ctiv=2. This will ensure calibration at - least once every 8 seconds and for temperature changes of 0.5 - degrees Celsius every 4 seconds. See the Product Specification - for the nRF52 device being used for more information.*/ - uint8_t accuracy; /**< External clock accuracy used in the LL to compute timing - windows, see @ref NRF_CLOCK_LF_ACCURACY.*/ -} nrf_clock_lf_cfg_t; - -/**@brief Fault Handler type. - * - * When certain unrecoverable errors occur within the application or SoftDevice the fault handler will be called back. - * The protocol stack will be in an undefined state when this happens and the only way to recover will be to - * perform a reset, using e.g. CMSIS NVIC_SystemReset(). - * If the application returns from the fault handler the SoftDevice will call NVIC_SystemReset(). - * - * @note This callback is executed in HardFault context, thus SVC functions cannot be called from the fault callback. - * - * @param[in] id Fault identifier. See @ref NRF_FAULT_IDS. - * @param[in] pc The program counter of the instruction that triggered the fault. - * @param[in] info Optional additional information regarding the fault. Refer to each Fault identifier for details. - * - * @note When id is set to @ref NRF_FAULT_ID_APP_MEMACC, pc will contain the address of the instruction being executed at the time when - * the fault is detected by the CPU. The CPU program counter may have advanced up to 2 instructions (no branching) after the one that triggered the fault. - */ -typedef void (*nrf_fault_handler_t)(uint32_t id, uint32_t pc, uint32_t info); - -/** @} */ - -/** @addtogroup NRF_SDM_FUNCTIONS Functions - * @{ */ - -/**@brief Enables the SoftDevice and by extension the protocol stack. - * - * @note Some care must be taken if a low frequency clock source is already running when calling this function: - * If the LF clock has a different source then the one currently running, it will be stopped. Then, the new - * clock source will be started. - * - * @note This function has no effect when returning with an error. - * - * @post If return code is ::NRF_SUCCESS - * - SoC library and protocol stack APIs are made available. - * - A portion of RAM will be unavailable (see relevant SDS documentation). - * - Some peripherals will be unavailable or available only through the SoC API (see relevant SDS documentation). - * - Interrupts will not arrive from protected peripherals or interrupts. - * - nrf_nvic_ functions must be used instead of CMSIS NVIC_ functions for reliable usage of the SoftDevice. - * - Interrupt latency may be affected by the SoftDevice (see relevant SDS documentation). - * - Chosen low frequency clock source will be running. - * - * @param p_clock_lf_cfg Low frequency clock source and accuracy. - If NULL the clock will be configured as an RC source with rc_ctiv = 16 and .rc_temp_ctiv = 2 - In the case of XTAL source, the PPM accuracy of the chosen clock source must be greater than or equal to the actual characteristics of your XTAL clock. - * @param fault_handler Callback to be invoked in case of fault, cannot be NULL. - * - * @retval ::NRF_SUCCESS - * @retval ::NRF_ERROR_INVALID_ADDR Invalid or NULL pointer supplied. - * @retval ::NRF_ERROR_INVALID_STATE SoftDevice is already enabled, and the clock source and fault handler cannot be updated. - * @retval ::NRF_ERROR_SDM_INCORRECT_INTERRUPT_CONFIGURATION SoftDevice interrupt is already enabled, or an enabled interrupt has an illegal priority level. - * @retval ::NRF_ERROR_SDM_LFCLK_SOURCE_UNKNOWN Unknown low frequency clock source selected. - * @retval ::NRF_ERROR_INVALID_PARAM Invalid clock source configuration supplied in p_clock_lf_cfg. - */ -SVCALL(SD_SOFTDEVICE_ENABLE, uint32_t, sd_softdevice_enable(nrf_clock_lf_cfg_t const * p_clock_lf_cfg, nrf_fault_handler_t fault_handler)); - - -/**@brief Disables the SoftDevice and by extension the protocol stack. - * - * Idempotent function to disable the SoftDevice. - * - * @post SoC library and protocol stack APIs are made unavailable. - * @post All interrupts that was protected by the SoftDevice will be disabled and initialized to priority 0 (highest). - * @post All peripherals used by the SoftDevice will be reset to default values. - * @post All of RAM become available. - * @post All interrupts are forwarded to the application. - * @post LFCLK source chosen in ::sd_softdevice_enable will be left running. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_SOFTDEVICE_DISABLE, uint32_t, sd_softdevice_disable(void)); - -/**@brief Check if the SoftDevice is enabled. - * - * @param[out] p_softdevice_enabled If the SoftDevice is enabled: 1 else 0. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_SOFTDEVICE_IS_ENABLED, uint32_t, sd_softdevice_is_enabled(uint8_t * p_softdevice_enabled)); - -/**@brief Sets the base address of the interrupt vector table for interrupts forwarded from the SoftDevice - * - * This function is only intended to be called when a bootloader is enabled. - * - * @param[in] address The base address of the interrupt vector table for forwarded interrupts. - - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_SOFTDEVICE_VECTOR_TABLE_BASE_SET, uint32_t, sd_softdevice_vector_table_base_set(uint32_t address)); - -/** @} */ - -#ifdef __cplusplus -} -#endif -#endif // NRF_SDM_H__ - -/** - @} -*/ diff --git a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_soc.h b/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_soc.h deleted file mode 100755 index beb4d3a5..00000000 --- a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_soc.h +++ /dev/null @@ -1,1079 +0,0 @@ -/* - * Copyright (c) 2015 - 2018, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * @defgroup nrf_soc_api SoC Library API - * @{ - * - * @brief APIs for the SoC library. - * - */ - -#ifndef NRF_SOC_H__ -#define NRF_SOC_H__ - -#include <stdint.h> -#include "nrf.h" -#include "nrf_svc.h" -#include "nrf_error.h" -#include "nrf_error_soc.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/**@addtogroup NRF_SOC_DEFINES Defines - * @{ */ - -/**@brief The number of the lowest SVC number reserved for the SoC library. */ -#define SOC_SVC_BASE (0x20) /**< Base value for SVCs that are available when the SoftDevice is disabled. */ -#define SOC_SVC_BASE_NOT_AVAILABLE (0x2C) /**< Base value for SVCs that are not available when the SoftDevice is disabled. */ - -/**@brief Guaranteed time for application to process radio inactive notification. */ -#define NRF_RADIO_NOTIFICATION_INACTIVE_GUARANTEED_TIME_US (62) - -/**@brief The minimum allowed timeslot extension time. */ -#define NRF_RADIO_MINIMUM_TIMESLOT_LENGTH_EXTENSION_TIME_US (200) - -/**@brief The maximum processing time to handle a timeslot extension. */ -#define NRF_RADIO_MAX_EXTENSION_PROCESSING_TIME_US (17) - -/**@brief The latest time before the end of a timeslot the timeslot can be extended. */ -#define NRF_RADIO_MIN_EXTENSION_MARGIN_US (79) - -#define SOC_ECB_KEY_LENGTH (16) /**< ECB key length. */ -#define SOC_ECB_CLEARTEXT_LENGTH (16) /**< ECB cleartext length. */ -#define SOC_ECB_CIPHERTEXT_LENGTH (SOC_ECB_CLEARTEXT_LENGTH) /**< ECB ciphertext length. */ - -#define SD_EVT_IRQn (SWI2_IRQn) /**< SoftDevice Event IRQ number. Used for both protocol events and SoC events. */ -#define SD_EVT_IRQHandler (SWI2_IRQHandler) /**< SoftDevice Event IRQ handler. Used for both protocol events and SoC events. - The default interrupt priority for this handler is set to 6 */ -#define RADIO_NOTIFICATION_IRQn (SWI1_IRQn) /**< The radio notification IRQ number. */ -#define RADIO_NOTIFICATION_IRQHandler (SWI1_IRQHandler) /**< The radio notification IRQ handler. - The default interrupt priority for this handler is set to 6 */ -#define NRF_RADIO_LENGTH_MIN_US (100) /**< The shortest allowed radio timeslot, in microseconds. */ -#define NRF_RADIO_LENGTH_MAX_US (100000) /**< The longest allowed radio timeslot, in microseconds. */ - -#define NRF_RADIO_DISTANCE_MAX_US (128000000UL - 1UL) /**< The longest timeslot distance, in microseconds, allowed for the distance parameter (see @ref nrf_radio_request_normal_t) in the request. */ - -#define NRF_RADIO_EARLIEST_TIMEOUT_MAX_US (128000000UL - 1UL) /**< The longest timeout, in microseconds, allowed when requesting the earliest possible timeslot. */ - -#define NRF_RADIO_START_JITTER_US (2) /**< The maximum jitter in @ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_START relative to the requested start time. */ - -/**@brief Mask of PPI channels reserved by the SoftDevice when the SoftDevice is disabled. */ -#define NRF_SOC_SD_PPI_CHANNELS_SD_DISABLED_MSK ((uint32_t)(0)) - -/**@brief Mask of PPI channels reserved by the SoftDevice when the SoftDevice is enabled. */ -#define NRF_SOC_SD_PPI_CHANNELS_SD_ENABLED_MSK ((uint32_t)( \ - (1U << 17) \ - | (1U << 18) \ - | (1U << 19) \ - | (1U << 20) \ - | (1U << 21) \ - | (1U << 22) \ - | (1U << 23) \ - | (1U << 24) \ - | (1U << 25) \ - | (1U << 26) \ - | (1U << 27) \ - | (1U << 28) \ - | (1U << 29) \ - | (1U << 30) \ - | (1U << 31) \ - )) - -/**@brief Mask of PPI channels available to the application when the SoftDevice is disabled. */ -#define NRF_SOC_APP_PPI_CHANNELS_SD_DISABLED_MSK (~NRF_SOC_SD_PPI_CHANNELS_SD_DISABLED_MSK) - -/**@brief Mask of PPI channels available to the application when the SoftDevice is enabled. */ -#define NRF_SOC_APP_PPI_CHANNELS_SD_ENABLED_MSK (~NRF_SOC_SD_PPI_CHANNELS_SD_ENABLED_MSK) - -/**@brief Mask of PPI groups reserved by the SoftDevice when the SoftDevice is disabled. */ -#define NRF_SOC_SD_PPI_GROUPS_SD_DISABLED_MSK ((uint32_t)(0)) - -/**@brief Mask of PPI groups reserved by the SoftDevice when the SoftDevice is enabled. */ -#define NRF_SOC_SD_PPI_GROUPS_SD_ENABLED_MSK ((uint32_t)( \ - (1U << 4) \ - | (1U << 5) \ - )) - -/**@brief Mask of PPI groups available to the application when the SoftDevice is disabled. */ -#define NRF_SOC_APP_PPI_GROUPS_SD_DISABLED_MSK (~NRF_SOC_SD_PPI_GROUPS_SD_DISABLED_MSK) - -/**@brief Mask of PPI groups available to the application when the SoftDevice is enabled. */ -#define NRF_SOC_APP_PPI_GROUPS_SD_ENABLED_MSK (~NRF_SOC_SD_PPI_GROUPS_SD_ENABLED_MSK) - -/**@} */ - -/**@addtogroup NRF_SOC_ENUMS Enumerations - * @{ */ - -/**@brief The SVC numbers used by the SVC functions in the SoC library. */ -enum NRF_SOC_SVCS -{ - SD_PPI_CHANNEL_ENABLE_GET = SOC_SVC_BASE, - SD_PPI_CHANNEL_ENABLE_SET = SOC_SVC_BASE + 1, - SD_PPI_CHANNEL_ENABLE_CLR = SOC_SVC_BASE + 2, - SD_PPI_CHANNEL_ASSIGN = SOC_SVC_BASE + 3, - SD_PPI_GROUP_TASK_ENABLE = SOC_SVC_BASE + 4, - SD_PPI_GROUP_TASK_DISABLE = SOC_SVC_BASE + 5, - SD_PPI_GROUP_ASSIGN = SOC_SVC_BASE + 6, - SD_PPI_GROUP_GET = SOC_SVC_BASE + 7, - SD_FLASH_PAGE_ERASE = SOC_SVC_BASE + 8, - SD_FLASH_WRITE = SOC_SVC_BASE + 9, - SD_PROTECTED_REGISTER_WRITE = SOC_SVC_BASE + 11, - SD_MUTEX_NEW = SOC_SVC_BASE_NOT_AVAILABLE, - SD_MUTEX_ACQUIRE = SOC_SVC_BASE_NOT_AVAILABLE + 1, - SD_MUTEX_RELEASE = SOC_SVC_BASE_NOT_AVAILABLE + 2, - SD_RAND_APPLICATION_POOL_CAPACITY_GET = SOC_SVC_BASE_NOT_AVAILABLE + 3, - SD_RAND_APPLICATION_BYTES_AVAILABLE_GET = SOC_SVC_BASE_NOT_AVAILABLE + 4, - SD_RAND_APPLICATION_VECTOR_GET = SOC_SVC_BASE_NOT_AVAILABLE + 5, - SD_POWER_MODE_SET = SOC_SVC_BASE_NOT_AVAILABLE + 6, - SD_POWER_SYSTEM_OFF = SOC_SVC_BASE_NOT_AVAILABLE + 7, - SD_POWER_RESET_REASON_GET = SOC_SVC_BASE_NOT_AVAILABLE + 8, - SD_POWER_RESET_REASON_CLR = SOC_SVC_BASE_NOT_AVAILABLE + 9, - SD_POWER_POF_ENABLE = SOC_SVC_BASE_NOT_AVAILABLE + 10, - SD_POWER_POF_THRESHOLD_SET = SOC_SVC_BASE_NOT_AVAILABLE + 11, - SD_POWER_POF_THRESHOLDVDDH_SET = SOC_SVC_BASE_NOT_AVAILABLE + 12, - SD_POWER_RAM_POWER_SET = SOC_SVC_BASE_NOT_AVAILABLE + 13, - SD_POWER_RAM_POWER_CLR = SOC_SVC_BASE_NOT_AVAILABLE + 14, - SD_POWER_RAM_POWER_GET = SOC_SVC_BASE_NOT_AVAILABLE + 15, - SD_POWER_GPREGRET_SET = SOC_SVC_BASE_NOT_AVAILABLE + 16, - SD_POWER_GPREGRET_CLR = SOC_SVC_BASE_NOT_AVAILABLE + 17, - SD_POWER_GPREGRET_GET = SOC_SVC_BASE_NOT_AVAILABLE + 18, - SD_POWER_DCDC_MODE_SET = SOC_SVC_BASE_NOT_AVAILABLE + 19, - SD_POWER_DCDC0_MODE_SET = SOC_SVC_BASE_NOT_AVAILABLE + 20, - SD_APP_EVT_WAIT = SOC_SVC_BASE_NOT_AVAILABLE + 21, - SD_CLOCK_HFCLK_REQUEST = SOC_SVC_BASE_NOT_AVAILABLE + 22, - SD_CLOCK_HFCLK_RELEASE = SOC_SVC_BASE_NOT_AVAILABLE + 23, - SD_CLOCK_HFCLK_IS_RUNNING = SOC_SVC_BASE_NOT_AVAILABLE + 24, - SD_RADIO_NOTIFICATION_CFG_SET = SOC_SVC_BASE_NOT_AVAILABLE + 25, - SD_ECB_BLOCK_ENCRYPT = SOC_SVC_BASE_NOT_AVAILABLE + 26, - SD_ECB_BLOCKS_ENCRYPT = SOC_SVC_BASE_NOT_AVAILABLE + 27, - SD_RADIO_SESSION_OPEN = SOC_SVC_BASE_NOT_AVAILABLE + 28, - SD_RADIO_SESSION_CLOSE = SOC_SVC_BASE_NOT_AVAILABLE + 29, - SD_RADIO_REQUEST = SOC_SVC_BASE_NOT_AVAILABLE + 30, - SD_EVT_GET = SOC_SVC_BASE_NOT_AVAILABLE + 31, - SD_TEMP_GET = SOC_SVC_BASE_NOT_AVAILABLE + 32, - SD_POWER_USBPWRRDY_ENABLE = SOC_SVC_BASE_NOT_AVAILABLE + 33, - SD_POWER_USBDETECTED_ENABLE = SOC_SVC_BASE_NOT_AVAILABLE + 34, - SD_POWER_USBREMOVED_ENABLE = SOC_SVC_BASE_NOT_AVAILABLE + 35, - SD_POWER_USBREGSTATUS_GET = SOC_SVC_BASE_NOT_AVAILABLE + 36, - SVC_SOC_LAST = SOC_SVC_BASE_NOT_AVAILABLE + 37 -}; - -/**@brief Possible values of a ::nrf_mutex_t. */ -enum NRF_MUTEX_VALUES -{ - NRF_MUTEX_FREE, - NRF_MUTEX_TAKEN -}; - -/**@brief Power modes. */ -enum NRF_POWER_MODES -{ - NRF_POWER_MODE_CONSTLAT, /**< Constant latency mode. See power management in the reference manual. */ - NRF_POWER_MODE_LOWPWR /**< Low power mode. See power management in the reference manual. */ -}; - - -/**@brief Power failure thresholds */ -enum NRF_POWER_THRESHOLDS -{ - NRF_POWER_THRESHOLD_V17 = 4UL, /**< 1.7 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V18, /**< 1.8 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V19, /**< 1.9 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V20, /**< 2.0 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V21, /**< 2.1 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V22, /**< 2.2 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V23, /**< 2.3 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V24, /**< 2.4 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V25, /**< 2.5 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V26, /**< 2.6 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V27, /**< 2.7 Volts power failure threshold. */ - NRF_POWER_THRESHOLD_V28 /**< 2.8 Volts power failure threshold. */ -}; - -/**@brief Power failure thresholds for high voltage */ -enum NRF_POWER_THRESHOLDVDDHS -{ - NRF_POWER_THRESHOLDVDDH_V27, /**< 2.7 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V28, /**< 2.8 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V29, /**< 2.9 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V30, /**< 3.0 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V31, /**< 3.1 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V32, /**< 3.2 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V33, /**< 3.3 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V34, /**< 3.4 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V35, /**< 3.5 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V36, /**< 3.6 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V37, /**< 3.7 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V38, /**< 3.8 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V39, /**< 3.9 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V40, /**< 4.0 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V41, /**< 4.1 Volts power failure threshold. */ - NRF_POWER_THRESHOLDVDDH_V42 /**< 4.2 Volts power failure threshold. */ -}; - - -/**@brief DC/DC converter modes. */ -enum NRF_POWER_DCDC_MODES -{ - NRF_POWER_DCDC_DISABLE, /**< The DCDC is disabled. */ - NRF_POWER_DCDC_ENABLE /**< The DCDC is enabled. */ -}; - -/**@brief Radio notification distances. */ -enum NRF_RADIO_NOTIFICATION_DISTANCES -{ - NRF_RADIO_NOTIFICATION_DISTANCE_NONE = 0, /**< The event does not have a notification. */ - NRF_RADIO_NOTIFICATION_DISTANCE_800US, /**< The distance from the active notification to start of radio activity. */ - NRF_RADIO_NOTIFICATION_DISTANCE_1740US, /**< The distance from the active notification to start of radio activity. */ - NRF_RADIO_NOTIFICATION_DISTANCE_2680US, /**< The distance from the active notification to start of radio activity. */ - NRF_RADIO_NOTIFICATION_DISTANCE_3620US, /**< The distance from the active notification to start of radio activity. */ - NRF_RADIO_NOTIFICATION_DISTANCE_4560US, /**< The distance from the active notification to start of radio activity. */ - NRF_RADIO_NOTIFICATION_DISTANCE_5500US /**< The distance from the active notification to start of radio activity. */ -}; - - -/**@brief Radio notification types. */ -enum NRF_RADIO_NOTIFICATION_TYPES -{ - NRF_RADIO_NOTIFICATION_TYPE_NONE = 0, /**< The event does not have a radio notification signal. */ - NRF_RADIO_NOTIFICATION_TYPE_INT_ON_ACTIVE, /**< Using interrupt for notification when the radio will be enabled. */ - NRF_RADIO_NOTIFICATION_TYPE_INT_ON_INACTIVE, /**< Using interrupt for notification when the radio has been disabled. */ - NRF_RADIO_NOTIFICATION_TYPE_INT_ON_BOTH, /**< Using interrupt for notification both when the radio will be enabled and disabled. */ -}; - -/**@brief The Radio signal callback types. */ -enum NRF_RADIO_CALLBACK_SIGNAL_TYPE -{ - NRF_RADIO_CALLBACK_SIGNAL_TYPE_START, /**< This signal indicates the start of the radio timeslot. */ - NRF_RADIO_CALLBACK_SIGNAL_TYPE_TIMER0, /**< This signal indicates the NRF_TIMER0 interrupt. */ - NRF_RADIO_CALLBACK_SIGNAL_TYPE_RADIO, /**< This signal indicates the NRF_RADIO interrupt. */ - NRF_RADIO_CALLBACK_SIGNAL_TYPE_EXTEND_FAILED, /**< This signal indicates extend action failed. */ - NRF_RADIO_CALLBACK_SIGNAL_TYPE_EXTEND_SUCCEEDED /**< This signal indicates extend action succeeded. */ -}; - -/**@brief The actions requested by the signal callback. - * - * This code gives the SOC instructions about what action to take when the signal callback has - * returned. - */ -enum NRF_RADIO_SIGNAL_CALLBACK_ACTION -{ - NRF_RADIO_SIGNAL_CALLBACK_ACTION_NONE, /**< Return without action. */ - NRF_RADIO_SIGNAL_CALLBACK_ACTION_EXTEND, /**< Request an extension of the current - timeslot. Maximum execution time for this action: - @ref NRF_RADIO_MAX_EXTENSION_PROCESSING_TIME_US. - This action must be started at least - @ref NRF_RADIO_MIN_EXTENSION_MARGIN_US before - the end of the timeslot. */ - NRF_RADIO_SIGNAL_CALLBACK_ACTION_END, /**< End the current radio timeslot. */ - NRF_RADIO_SIGNAL_CALLBACK_ACTION_REQUEST_AND_END /**< Request a new radio timeslot and end the current timeslot. */ -}; - -/**@brief Radio timeslot high frequency clock source configuration. */ -enum NRF_RADIO_HFCLK_CFG -{ - NRF_RADIO_HFCLK_CFG_XTAL_GUARANTEED, /**< The SoftDevice will guarantee that the high frequency clock source is the - external crystal for the whole duration of the timeslot. This should be the - preferred option for events that use the radio or require high timing accuracy. - @note The SoftDevice will automatically turn on and off the external crystal, - at the beginning and end of the timeslot, respectively. The crystal may also - intentionally be left running after the timeslot, in cases where it is needed - by the SoftDevice shortly after the end of the timeslot. */ - NRF_RADIO_HFCLK_CFG_NO_GUARANTEE /**< This configuration allows for earlier and tighter scheduling of timeslots. - The RC oscillator may be the clock source in part or for the whole duration of the timeslot. - The RC oscillator's accuracy must therefore be taken into consideration. - @note If the application will use the radio peripheral in timeslots with this configuration, - it must make sure that the crystal is running and stable before starting the radio. */ -}; - -/**@brief Radio timeslot priorities. */ -enum NRF_RADIO_PRIORITY -{ - NRF_RADIO_PRIORITY_HIGH, /**< High (equal priority as the normal connection priority of the SoftDevice stack(s)). */ - NRF_RADIO_PRIORITY_NORMAL, /**< Normal (equal priority as the priority of secondary activities of the SoftDevice stack(s)). */ -}; - -/**@brief Radio timeslot request type. */ -enum NRF_RADIO_REQUEST_TYPE -{ - NRF_RADIO_REQ_TYPE_EARLIEST, /**< Request radio timeslot as early as possible. This should always be used for the first request in a session. */ - NRF_RADIO_REQ_TYPE_NORMAL /**< Normal radio timeslot request. */ -}; - -/**@brief SoC Events. */ -enum NRF_SOC_EVTS -{ - NRF_EVT_HFCLKSTARTED, /**< Event indicating that the HFCLK has started. */ - NRF_EVT_POWER_FAILURE_WARNING, /**< Event indicating that a power failure warning has occurred. */ - NRF_EVT_FLASH_OPERATION_SUCCESS, /**< Event indicating that the ongoing flash operation has completed successfully. */ - NRF_EVT_FLASH_OPERATION_ERROR, /**< Event indicating that the ongoing flash operation has timed out with an error. */ - NRF_EVT_RADIO_BLOCKED, /**< Event indicating that a radio timeslot was blocked. */ - NRF_EVT_RADIO_CANCELED, /**< Event indicating that a radio timeslot was canceled by SoftDevice. */ - NRF_EVT_RADIO_SIGNAL_CALLBACK_INVALID_RETURN, /**< Event indicating that a radio timeslot signal callback handler return was invalid. */ - NRF_EVT_RADIO_SESSION_IDLE, /**< Event indicating that a radio timeslot session is idle. */ - NRF_EVT_RADIO_SESSION_CLOSED, /**< Event indicating that a radio timeslot session is closed. */ - NRF_EVT_POWER_USB_POWER_READY, /**< Event indicating that a USB 3.3 V supply is ready. */ - NRF_EVT_POWER_USB_DETECTED, /**< Event indicating that voltage supply is detected on VBUS. */ - NRF_EVT_POWER_USB_REMOVED, /**< Event indicating that voltage supply is removed from VBUS. */ - NRF_EVT_NUMBER_OF_EVTS -}; - -/**@} */ - - -/**@addtogroup NRF_SOC_STRUCTURES Structures - * @{ */ - -/**@brief Represents a mutex for use with the nrf_mutex functions. - * @note Accessing the value directly is not safe, use the mutex functions! - */ -typedef volatile uint8_t nrf_mutex_t; - -/**@brief Parameters for a request for a timeslot as early as possible. */ -typedef struct -{ - uint8_t hfclk; /**< High frequency clock source, see @ref NRF_RADIO_HFCLK_CFG. */ - uint8_t priority; /**< The radio timeslot priority, see @ref NRF_RADIO_PRIORITY. */ - uint32_t length_us; /**< The radio timeslot length (in the range 100 to 100,000] microseconds). */ - uint32_t timeout_us; /**< Longest acceptable delay until the start of the requested timeslot (up to @ref NRF_RADIO_EARLIEST_TIMEOUT_MAX_US microseconds). */ -} nrf_radio_request_earliest_t; - -/**@brief Parameters for a normal radio timeslot request. */ -typedef struct -{ - uint8_t hfclk; /**< High frequency clock source, see @ref NRF_RADIO_HFCLK_CFG. */ - uint8_t priority; /**< The radio timeslot priority, see @ref NRF_RADIO_PRIORITY. */ - uint32_t distance_us; /**< Distance from the start of the previous radio timeslot (up to @ref NRF_RADIO_DISTANCE_MAX_US microseconds). */ - uint32_t length_us; /**< The radio timeslot length (in the range [100..100,000] microseconds). */ -} nrf_radio_request_normal_t; - -/**@brief Radio timeslot request parameters. */ -typedef struct -{ - uint8_t request_type; /**< Type of request, see @ref NRF_RADIO_REQUEST_TYPE. */ - union - { - nrf_radio_request_earliest_t earliest; /**< Parameters for requesting a radio timeslot as early as possible. */ - nrf_radio_request_normal_t normal; /**< Parameters for requesting a normal radio timeslot. */ - } params; /**< Parameter union. */ -} nrf_radio_request_t; - -/**@brief Return parameters of the radio timeslot signal callback. */ -typedef struct -{ - uint8_t callback_action; /**< The action requested by the application when returning from the signal callback, see @ref NRF_RADIO_SIGNAL_CALLBACK_ACTION. */ - union - { - struct - { - nrf_radio_request_t * p_next; /**< The request parameters for the next radio timeslot. */ - } request; /**< Additional parameters for return_code @ref NRF_RADIO_SIGNAL_CALLBACK_ACTION_REQUEST_AND_END. */ - struct - { - uint32_t length_us; /**< Requested extension of the radio timeslot duration (microseconds) (for minimum time see @ref NRF_RADIO_MINIMUM_TIMESLOT_LENGTH_EXTENSION_TIME_US). */ - } extend; /**< Additional parameters for return_code @ref NRF_RADIO_SIGNAL_CALLBACK_ACTION_EXTEND. */ - } params; /**< Parameter union. */ -} nrf_radio_signal_callback_return_param_t; - -/**@brief The radio timeslot signal callback type. - * - * @note In case of invalid return parameters, the radio timeslot will automatically end - * immediately after returning from the signal callback and the - * @ref NRF_EVT_RADIO_SIGNAL_CALLBACK_INVALID_RETURN event will be sent. - * @note The returned struct pointer must remain valid after the signal callback - * function returns. For instance, this means that it must not point to a stack variable. - * - * @param[in] signal_type Type of signal, see @ref NRF_RADIO_CALLBACK_SIGNAL_TYPE. - * - * @return Pointer to structure containing action requested by the application. - */ -typedef nrf_radio_signal_callback_return_param_t * (*nrf_radio_signal_callback_t) (uint8_t signal_type); - -/**@brief AES ECB parameter typedefs */ -typedef uint8_t soc_ecb_key_t[SOC_ECB_KEY_LENGTH]; /**< Encryption key type. */ -typedef uint8_t soc_ecb_cleartext_t[SOC_ECB_CLEARTEXT_LENGTH]; /**< Cleartext data type. */ -typedef uint8_t soc_ecb_ciphertext_t[SOC_ECB_CIPHERTEXT_LENGTH]; /**< Ciphertext data type. */ - -/**@brief AES ECB data structure */ -typedef struct -{ - soc_ecb_key_t key; /**< Encryption key. */ - soc_ecb_cleartext_t cleartext; /**< Cleartext data. */ - soc_ecb_ciphertext_t ciphertext; /**< Ciphertext data. */ -} nrf_ecb_hal_data_t; - -/**@brief AES ECB block. Used to provide multiple blocks in a single call - to @ref sd_ecb_blocks_encrypt.*/ -typedef struct -{ - soc_ecb_key_t const * p_key; /**< Pointer to the Encryption key. */ - soc_ecb_cleartext_t const * p_cleartext; /**< Pointer to the Cleartext data. */ - soc_ecb_ciphertext_t * p_ciphertext; /**< Pointer to the Ciphertext data. */ -} nrf_ecb_hal_data_block_t; - -/**@} */ - -/**@addtogroup NRF_SOC_FUNCTIONS Functions - * @{ */ - -/**@brief Initialize a mutex. - * - * @param[in] p_mutex Pointer to the mutex to initialize. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_MUTEX_NEW, uint32_t, sd_mutex_new(nrf_mutex_t * p_mutex)); - -/**@brief Attempt to acquire a mutex. - * - * @param[in] p_mutex Pointer to the mutex to acquire. - * - * @retval ::NRF_SUCCESS The mutex was successfully acquired. - * @retval ::NRF_ERROR_SOC_MUTEX_ALREADY_TAKEN The mutex could not be acquired. - */ -SVCALL(SD_MUTEX_ACQUIRE, uint32_t, sd_mutex_acquire(nrf_mutex_t * p_mutex)); - -/**@brief Release a mutex. - * - * @param[in] p_mutex Pointer to the mutex to release. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_MUTEX_RELEASE, uint32_t, sd_mutex_release(nrf_mutex_t * p_mutex)); - -/**@brief Query the capacity of the application random pool. - * - * @param[out] p_pool_capacity The capacity of the pool. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_RAND_APPLICATION_POOL_CAPACITY_GET, uint32_t, sd_rand_application_pool_capacity_get(uint8_t * p_pool_capacity)); - -/**@brief Get number of random bytes available to the application. - * - * @param[out] p_bytes_available The number of bytes currently available in the pool. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_RAND_APPLICATION_BYTES_AVAILABLE_GET, uint32_t, sd_rand_application_bytes_available_get(uint8_t * p_bytes_available)); - -/**@brief Get random bytes from the application pool. - * - * @param[out] p_buff Pointer to unit8_t buffer for storing the bytes. - * @param[in] length Number of bytes to take from pool and place in p_buff. - * - * @retval ::NRF_SUCCESS The requested bytes were written to p_buff. - * @retval ::NRF_ERROR_SOC_RAND_NOT_ENOUGH_VALUES No bytes were written to the buffer, because there were not enough bytes available. -*/ -SVCALL(SD_RAND_APPLICATION_VECTOR_GET, uint32_t, sd_rand_application_vector_get(uint8_t * p_buff, uint8_t length)); - -/**@brief Gets the reset reason register. - * - * @param[out] p_reset_reason Contents of the NRF_POWER->RESETREAS register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_RESET_REASON_GET, uint32_t, sd_power_reset_reason_get(uint32_t * p_reset_reason)); - -/**@brief Clears the bits of the reset reason register. - * - * @param[in] reset_reason_clr_msk Contains the bits to clear from the reset reason register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_RESET_REASON_CLR, uint32_t, sd_power_reset_reason_clr(uint32_t reset_reason_clr_msk)); - -/**@brief Sets the power mode when in CPU sleep. - * - * @param[in] power_mode The power mode to use when in CPU sleep, see @ref NRF_POWER_MODES. @sa sd_app_evt_wait - * - * @retval ::NRF_SUCCESS The power mode was set. - * @retval ::NRF_ERROR_SOC_POWER_MODE_UNKNOWN The power mode was unknown. - */ -SVCALL(SD_POWER_MODE_SET, uint32_t, sd_power_mode_set(uint8_t power_mode)); - -/**@brief Puts the chip in System OFF mode. - * - * @retval ::NRF_ERROR_SOC_POWER_OFF_SHOULD_NOT_RETURN - */ -SVCALL(SD_POWER_SYSTEM_OFF, uint32_t, sd_power_system_off(void)); - -/**@brief Enables or disables the power-fail comparator. - * - * Enabling this will give a SoftDevice event (NRF_EVT_POWER_FAILURE_WARNING) when the power failure warning occurs. - * The event can be retrieved with sd_evt_get(); - * - * @param[in] pof_enable True if the power-fail comparator should be enabled, false if it should be disabled. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_POF_ENABLE, uint32_t, sd_power_pof_enable(uint8_t pof_enable)); - -/**@brief Enables or disables the USB power ready event. - * - * Enabling this will give a SoftDevice event (NRF_EVT_POWER_USB_POWER_READY) when a USB 3.3 V supply is ready. - * The event can be retrieved with sd_evt_get(); - * - * @param[in] usbpwrrdy_enable True if the power ready event should be enabled, false if it should be disabled. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_USBPWRRDY_ENABLE, uint32_t, sd_power_usbpwrrdy_enable(uint8_t usbpwrrdy_enable)); - -/**@brief Enables or disables the power USB-detected event. - * - * Enabling this will give a SoftDevice event (NRF_EVT_POWER_USB_DETECTED) when a voltage supply is detected on VBUS. - * The event can be retrieved with sd_evt_get(); - * - * @param[in] usbdetected_enable True if the power ready event should be enabled, false if it should be disabled. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_USBDETECTED_ENABLE, uint32_t, sd_power_usbdetected_enable(uint8_t usbdetected_enable)); - -/**@brief Enables or disables the power USB-removed event. - * - * Enabling this will give a SoftDevice event (NRF_EVT_POWER_USB_REMOVED) when a voltage supply is removed from VBUS. - * The event can be retrieved with sd_evt_get(); - * - * @param[in] usbremoved_enable True if the power ready event should be enabled, false if it should be disabled. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_USBREMOVED_ENABLE, uint32_t, sd_power_usbremoved_enable(uint8_t usbremoved_enable)); - -/**@brief Get USB supply status register content. - * - * @param[out] usbregstatus The content of USBREGSTATUS register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_USBREGSTATUS_GET, uint32_t, sd_power_usbregstatus_get(uint32_t * usbregstatus)); - -/**@brief Sets the power failure comparator threshold value. - * - * @note: Power failure comparator threshold setting. This setting applies both for normal voltage - * mode (supply connected to both VDD and VDDH) and high voltage mode (supply connected to - * VDDH only). - * - * @param[in] threshold The power-fail threshold value to use, see @ref NRF_POWER_THRESHOLDS. - * - * @retval ::NRF_SUCCESS The power failure threshold was set. - * @retval ::NRF_ERROR_SOC_POWER_POF_THRESHOLD_UNKNOWN The power failure threshold is unknown. - */ -SVCALL(SD_POWER_POF_THRESHOLD_SET, uint32_t, sd_power_pof_threshold_set(uint8_t threshold)); - -/**@brief Sets the power failure comparator threshold value for high voltage. - * - * @note: Power failure comparator threshold setting for high voltage mode (supply connected to - * VDDH only). This setting does not apply for normal voltage mode (supply connected to both - * VDD and VDDH). - * - * @param[in] threshold The power-fail threshold value to use, see @ref NRF_POWER_THRESHOLDVDDHS. - * - * @retval ::NRF_SUCCESS The power failure threshold was set. - * @retval ::NRF_ERROR_SOC_POWER_POF_THRESHOLD_UNKNOWN The power failure threshold is unknown. - */ -SVCALL(SD_POWER_POF_THRESHOLDVDDH_SET, uint32_t, sd_power_pof_thresholdvddh_set(uint8_t threshold)); - -/**@brief Writes the NRF_POWER->RAM[index].POWERSET register. - * - * @param[in] index Contains the index in the NRF_POWER->RAM[index].POWERSET register to write to. - * @param[in] ram_powerset Contains the word to write to the NRF_POWER->RAM[index].POWERSET register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_RAM_POWER_SET, uint32_t, sd_power_ram_power_set(uint8_t index, uint32_t ram_powerset)); - -/**@brief Writes the NRF_POWER->RAM[index].POWERCLR register. - * - * @param[in] index Contains the index in the NRF_POWER->RAM[index].POWERCLR register to write to. - * @param[in] ram_powerclr Contains the word to write to the NRF_POWER->RAM[index].POWERCLR register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_RAM_POWER_CLR, uint32_t, sd_power_ram_power_clr(uint8_t index, uint32_t ram_powerclr)); - -/**@brief Get contents of NRF_POWER->RAM[index].POWER register, indicates power status of RAM[index] blocks. - * - * @param[in] index Contains the index in the NRF_POWER->RAM[index].POWER register to read from. - * @param[out] p_ram_power Content of NRF_POWER->RAM[index].POWER register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_RAM_POWER_GET, uint32_t, sd_power_ram_power_get(uint8_t index, uint32_t * p_ram_power)); - -/**@brief Set bits in the general purpose retention registers (NRF_POWER->GPREGRET*). - * - * @param[in] gpregret_id 0 for GPREGRET, 1 for GPREGRET2. - * @param[in] gpregret_msk Bits to be set in the GPREGRET register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_GPREGRET_SET, uint32_t, sd_power_gpregret_set(uint32_t gpregret_id, uint32_t gpregret_msk)); - -/**@brief Clear bits in the general purpose retention registers (NRF_POWER->GPREGRET*). - * - * @param[in] gpregret_id 0 for GPREGRET, 1 for GPREGRET2. - * @param[in] gpregret_msk Bits to be clear in the GPREGRET register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_GPREGRET_CLR, uint32_t, sd_power_gpregret_clr(uint32_t gpregret_id, uint32_t gpregret_msk)); - -/**@brief Get contents of the general purpose retention registers (NRF_POWER->GPREGRET*). - * - * @param[in] gpregret_id 0 for GPREGRET, 1 for GPREGRET2. - * @param[out] p_gpregret Contents of the GPREGRET register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_POWER_GPREGRET_GET, uint32_t, sd_power_gpregret_get(uint32_t gpregret_id, uint32_t *p_gpregret)); - -/**@brief Enable or disable the DC/DC regulator for the regulator stage 1 (REG1). - * - * @param[in] dcdc_mode The mode of the DCDC, see @ref NRF_POWER_DCDC_MODES. - * - * @retval ::NRF_SUCCESS - * @retval ::NRF_ERROR_INVALID_PARAM The DCDC mode is invalid. - */ -SVCALL(SD_POWER_DCDC_MODE_SET, uint32_t, sd_power_dcdc_mode_set(uint8_t dcdc_mode)); - -/**@brief Enable or disable the DC/DC regulator for the regulator stage 0 (REG0). - * - * For more details on the REG0 stage, please see product specification. - * - * @param[in] dcdc_mode The mode of the DCDC0, see @ref NRF_POWER_DCDC_MODES. - * - * @retval ::NRF_SUCCESS - * @retval ::NRF_ERROR_INVALID_PARAM The dcdc_mode is invalid. - */ -SVCALL(SD_POWER_DCDC0_MODE_SET, uint32_t, sd_power_dcdc0_mode_set(uint8_t dcdc_mode)); - -/**@brief Request the high frequency crystal oscillator. - * - * Will start the high frequency crystal oscillator, the startup time of the crystal varies - * and the ::sd_clock_hfclk_is_running function can be polled to check if it has started. - * - * @see sd_clock_hfclk_is_running - * @see sd_clock_hfclk_release - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_CLOCK_HFCLK_REQUEST, uint32_t, sd_clock_hfclk_request(void)); - -/**@brief Releases the high frequency crystal oscillator. - * - * Will stop the high frequency crystal oscillator, this happens immediately. - * - * @see sd_clock_hfclk_is_running - * @see sd_clock_hfclk_request - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_CLOCK_HFCLK_RELEASE, uint32_t, sd_clock_hfclk_release(void)); - -/**@brief Checks if the high frequency crystal oscillator is running. - * - * @see sd_clock_hfclk_request - * @see sd_clock_hfclk_release - * - * @param[out] p_is_running 1 if the external crystal oscillator is running, 0 if not. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_CLOCK_HFCLK_IS_RUNNING, uint32_t, sd_clock_hfclk_is_running(uint32_t * p_is_running)); - -/**@brief Waits for an application event. - * - * An application event is either an application interrupt or a pended interrupt when the interrupt - * is disabled. - * - * When the application waits for an application event by calling this function, an interrupt that - * is enabled will be taken immediately on pending since this function will wait in thread mode, - * then the execution will return in the application's main thread. - * - * In order to wake up from disabled interrupts, the SEVONPEND flag has to be set in the Cortex-M - * MCU's System Control Register (SCR), CMSIS_SCB. In that case, when a disabled interrupt gets - * pended, this function will return to the application's main thread. - * - * @note The application must ensure that the pended flag is cleared using ::sd_nvic_ClearPendingIRQ - * in order to sleep using this function. This is only necessary for disabled interrupts, as - * the interrupt handler will clear the pending flag automatically for enabled interrupts. - * - * @note If an application interrupt has happened since the last time sd_app_evt_wait was - * called this function will return immediately and not go to sleep. This is to avoid race - * conditions that can occur when a flag is updated in the interrupt handler and processed - * in the main loop. - * - * @post An application interrupt has happened or a interrupt pending flag is set. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_APP_EVT_WAIT, uint32_t, sd_app_evt_wait(void)); - -/**@brief Get PPI channel enable register contents. - * - * @param[out] p_channel_enable The contents of the PPI CHEN register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_PPI_CHANNEL_ENABLE_GET, uint32_t, sd_ppi_channel_enable_get(uint32_t * p_channel_enable)); - -/**@brief Set PPI channel enable register. - * - * @param[in] channel_enable_set_msk Mask containing the bits to set in the PPI CHEN register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_PPI_CHANNEL_ENABLE_SET, uint32_t, sd_ppi_channel_enable_set(uint32_t channel_enable_set_msk)); - -/**@brief Clear PPI channel enable register. - * - * @param[in] channel_enable_clr_msk Mask containing the bits to clear in the PPI CHEN register. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_PPI_CHANNEL_ENABLE_CLR, uint32_t, sd_ppi_channel_enable_clr(uint32_t channel_enable_clr_msk)); - -/**@brief Assign endpoints to a PPI channel. - * - * @param[in] channel_num Number of the PPI channel to assign. - * @param[in] evt_endpoint Event endpoint of the PPI channel. - * @param[in] task_endpoint Task endpoint of the PPI channel. - * - * @retval ::NRF_ERROR_SOC_PPI_INVALID_CHANNEL The channel number is invalid. - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_PPI_CHANNEL_ASSIGN, uint32_t, sd_ppi_channel_assign(uint8_t channel_num, const volatile void * evt_endpoint, const volatile void * task_endpoint)); - -/**@brief Task to enable a channel group. - * - * @param[in] group_num Number of the channel group. - * - * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_PPI_GROUP_TASK_ENABLE, uint32_t, sd_ppi_group_task_enable(uint8_t group_num)); - -/**@brief Task to disable a channel group. - * - * @param[in] group_num Number of the PPI group. - * - * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid. - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_PPI_GROUP_TASK_DISABLE, uint32_t, sd_ppi_group_task_disable(uint8_t group_num)); - -/**@brief Assign PPI channels to a channel group. - * - * @param[in] group_num Number of the channel group. - * @param[in] channel_msk Mask of the channels to assign to the group. - * - * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid. - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_PPI_GROUP_ASSIGN, uint32_t, sd_ppi_group_assign(uint8_t group_num, uint32_t channel_msk)); - -/**@brief Gets the PPI channels of a channel group. - * - * @param[in] group_num Number of the channel group. - * @param[out] p_channel_msk Mask of the channels assigned to the group. - * - * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid. - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_PPI_GROUP_GET, uint32_t, sd_ppi_group_get(uint8_t group_num, uint32_t * p_channel_msk)); - -/**@brief Configures the Radio Notification signal. - * - * @note - * - The notification signal latency depends on the interrupt priority settings of SWI used - * for notification signal. - * - To ensure that the radio notification signal behaves in a consistent way, the radio - * notifications must be configured when there is no protocol stack or other SoftDevice - * activity in progress. It is recommended that the radio notification signal is - * configured directly after the SoftDevice has been enabled. - * - In the period between the ACTIVE signal and the start of the Radio Event, the SoftDevice - * will interrupt the application to do Radio Event preparation. - * - Using the Radio Notification feature may limit the bandwidth, as the SoftDevice may have - * to shorten the connection events to have time for the Radio Notification signals. - * - * @param[in] type Type of notification signal, see @ref NRF_RADIO_NOTIFICATION_TYPES. - * @ref NRF_RADIO_NOTIFICATION_TYPE_NONE shall be used to turn off radio - * notification. Using @ref NRF_RADIO_NOTIFICATION_DISTANCE_NONE is - * recommended (but not required) to be used with - * @ref NRF_RADIO_NOTIFICATION_TYPE_NONE. - * - * @param[in] distance Distance between the notification signal and start of radio activity, see @ref NRF_RADIO_NOTIFICATION_DISTANCES. - * This parameter is ignored when @ref NRF_RADIO_NOTIFICATION_TYPE_NONE or - * @ref NRF_RADIO_NOTIFICATION_TYPE_INT_ON_INACTIVE is used. - * - * @retval ::NRF_ERROR_INVALID_PARAM The group number is invalid. - * @retval ::NRF_ERROR_INVALID_STATE A protocol stack or other SoftDevice is running. Stop all - * running activities and retry. - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_RADIO_NOTIFICATION_CFG_SET, uint32_t, sd_radio_notification_cfg_set(uint8_t type, uint8_t distance)); - -/**@brief Encrypts a block according to the specified parameters. - * - * 128-bit AES encryption. - * - * @note: - * - The application may set the SEVONPEND bit in the SCR to 1 to make the SoftDevice sleep while - * the ECB is running. The SEVONPEND bit should only be cleared (set to 0) from application - * main or low interrupt level. - * - * @param[in, out] p_ecb_data Pointer to the ECB parameters' struct (two input - * parameters and one output parameter). - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_ECB_BLOCK_ENCRYPT, uint32_t, sd_ecb_block_encrypt(nrf_ecb_hal_data_t * p_ecb_data)); - -/**@brief Encrypts multiple data blocks provided as an array of data block structures. - * - * @details: Performs 128-bit AES encryption on multiple data blocks - * - * @note: - * - The application may set the SEVONPEND bit in the SCR to 1 to make the SoftDevice sleep while - * the ECB is running. The SEVONPEND bit should only be cleared (set to 0) from application - * main or low interrupt level. - * - * @param[in] block_count Count of blocks in the p_data_blocks array. - * @param[in,out] p_data_blocks Pointer to the first entry in a contiguous array of - * @ref nrf_ecb_hal_data_block_t structures. - * - * @retval ::NRF_SUCCESS - */ -SVCALL(SD_ECB_BLOCKS_ENCRYPT, uint32_t, sd_ecb_blocks_encrypt(uint8_t block_count, nrf_ecb_hal_data_block_t * p_data_blocks)); - -/**@brief Gets any pending events generated by the SoC API. - * - * The application should keep calling this function to get events, until ::NRF_ERROR_NOT_FOUND is returned. - * - * @param[out] p_evt_id Set to one of the values in @ref NRF_SOC_EVTS, if any events are pending. - * - * @retval ::NRF_SUCCESS An event was pending. The event id is written in the p_evt_id parameter. - * @retval ::NRF_ERROR_NOT_FOUND No pending events. - */ -SVCALL(SD_EVT_GET, uint32_t, sd_evt_get(uint32_t * p_evt_id)); - -/**@brief Get the temperature measured on the chip - * - * This function will block until the temperature measurement is done. - * It takes around 50 us from call to return. - * - * @param[out] p_temp Result of temperature measurement. Die temperature in 0.25 degrees Celsius. - * - * @retval ::NRF_SUCCESS A temperature measurement was done, and the temperature was written to temp - */ -SVCALL(SD_TEMP_GET, uint32_t, sd_temp_get(int32_t * p_temp)); - -/**@brief Flash Write -* -* Commands to write a buffer to flash -* -* If the SoftDevice is enabled: -* This call initiates the flash access command, and its completion will be communicated to the -* application with exactly one of the following events: -* - @ref NRF_EVT_FLASH_OPERATION_SUCCESS - The command was successfully completed. -* - @ref NRF_EVT_FLASH_OPERATION_ERROR - The command could not be started. -* -* If the SoftDevice is not enabled no event will be generated, and this call will return @ref NRF_SUCCESS when the - * write has been completed -* -* @note -* - This call takes control over the radio and the CPU during flash erase and write to make sure that -* they will not interfere with the flash access. This means that all interrupts will be blocked -* for a predictable time (depending on the NVMC specification in the device's Product Specification -* and the command parameters). -* - The data in the p_src buffer should not be modified before the @ref NRF_EVT_FLASH_OPERATION_SUCCESS -* or the @ref NRF_EVT_FLASH_OPERATION_ERROR have been received if the SoftDevice is enabled. -* - This call will make the SoftDevice trigger a hardfault when the page is written, if it is -* protected. -* -* -* @param[in] p_dst Pointer to start of flash location to be written. -* @param[in] p_src Pointer to buffer with data to be written. -* @param[in] size Number of 32-bit words to write. Maximum size is the number of words in one -* flash page. See the device's Product Specification for details. -* -* @retval ::NRF_ERROR_INVALID_ADDR Tried to write to a non existing flash address, or p_dst or p_src was unaligned. -* @retval ::NRF_ERROR_BUSY The previous command has not yet completed. -* @retval ::NRF_ERROR_INVALID_LENGTH Size was 0, or higher than the maximum allowed size. -* @retval ::NRF_ERROR_FORBIDDEN Tried to write to an address outside the application flash area. -* @retval ::NRF_SUCCESS The command was accepted. -*/ -SVCALL(SD_FLASH_WRITE, uint32_t, sd_flash_write(uint32_t * p_dst, uint32_t const * p_src, uint32_t size)); - - -/**@brief Flash Erase page -* -* Commands to erase a flash page -* If the SoftDevice is enabled: -* This call initiates the flash access command, and its completion will be communicated to the -* application with exactly one of the following events: -* - @ref NRF_EVT_FLASH_OPERATION_SUCCESS - The command was successfully completed. -* - @ref NRF_EVT_FLASH_OPERATION_ERROR - The command could not be started. -* -* If the SoftDevice is not enabled no event will be generated, and this call will return @ref NRF_SUCCESS when the -* erase has been completed -* -* @note -* - This call takes control over the radio and the CPU during flash erase and write to make sure that -* they will not interfere with the flash access. This means that all interrupts will be blocked -* for a predictable time (depending on the NVMC specification in the device's Product Specification -* and the command parameters). -* - This call will make the SoftDevice trigger a hardfault when the page is erased, if it is -* protected. -* -* -* @param[in] page_number Page number of the page to erase -* -* @retval ::NRF_ERROR_INTERNAL If a new session could not be opened due to an internal error. -* @retval ::NRF_ERROR_INVALID_ADDR Tried to erase to a non existing flash page. -* @retval ::NRF_ERROR_BUSY The previous command has not yet completed. -* @retval ::NRF_ERROR_FORBIDDEN Tried to erase a page outside the application flash area. -* @retval ::NRF_SUCCESS The command was accepted. -*/ -SVCALL(SD_FLASH_PAGE_ERASE, uint32_t, sd_flash_page_erase(uint32_t page_number)); - - - -/**@brief Opens a session for radio timeslot requests. - * - * @note Only one session can be open at a time. - * @note p_radio_signal_callback(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_START) will be called when the radio timeslot - * starts. From this point the NRF_RADIO and NRF_TIMER0 peripherals can be freely accessed - * by the application. - * @note p_radio_signal_callback(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_TIMER0) is called whenever the NRF_TIMER0 - * interrupt occurs. - * @note p_radio_signal_callback(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_RADIO) is called whenever the NRF_RADIO - * interrupt occurs. - * @note p_radio_signal_callback() will be called at ARM interrupt priority level 0. This - * implies that none of the sd_* API calls can be used from p_radio_signal_callback(). - * - * @param[in] p_radio_signal_callback The signal callback. - * - * @retval ::NRF_ERROR_INVALID_ADDR p_radio_signal_callback is an invalid function pointer. - * @retval ::NRF_ERROR_BUSY If session cannot be opened. - * @retval ::NRF_ERROR_INTERNAL If a new session could not be opened due to an internal error. - * @retval ::NRF_SUCCESS Otherwise. - */ - SVCALL(SD_RADIO_SESSION_OPEN, uint32_t, sd_radio_session_open(nrf_radio_signal_callback_t p_radio_signal_callback)); - -/**@brief Closes a session for radio timeslot requests. - * - * @note Any current radio timeslot will be finished before the session is closed. - * @note If a radio timeslot is scheduled when the session is closed, it will be canceled. - * @note The application cannot consider the session closed until the @ref NRF_EVT_RADIO_SESSION_CLOSED - * event is received. - * - * @retval ::NRF_ERROR_FORBIDDEN If session not opened. - * @retval ::NRF_ERROR_BUSY If session is currently being closed. - * @retval ::NRF_SUCCESS Otherwise. - */ - SVCALL(SD_RADIO_SESSION_CLOSE, uint32_t, sd_radio_session_close(void)); - -/**@brief Requests a radio timeslot. - * - * @note The request type is determined by p_request->request_type, and can be one of @ref NRF_RADIO_REQ_TYPE_EARLIEST - * and @ref NRF_RADIO_REQ_TYPE_NORMAL. The first request in a session must always be of type @ref NRF_RADIO_REQ_TYPE_EARLIEST. - * @note For a normal request (@ref NRF_RADIO_REQ_TYPE_NORMAL), the start time of a radio timeslot is specified by - * p_request->distance_us and is given relative to the start of the previous timeslot. - * @note A too small p_request->distance_us will lead to a @ref NRF_EVT_RADIO_BLOCKED event. - * @note Timeslots scheduled too close will lead to a @ref NRF_EVT_RADIO_BLOCKED event. - * @note See the SoftDevice Specification for more on radio timeslot scheduling, distances and lengths. - * @note If an opportunity for the first radio timeslot is not found before 100 ms after the call to this - * function, it is not scheduled, and instead a @ref NRF_EVT_RADIO_BLOCKED event is sent. - * The application may then try to schedule the first radio timeslot again. - * @note Successful requests will result in nrf_radio_signal_callback_t(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_START). - * Unsuccessful requests will result in a @ref NRF_EVT_RADIO_BLOCKED event, see @ref NRF_SOC_EVTS. - * @note The jitter in the start time of the radio timeslots is +/- @ref NRF_RADIO_START_JITTER_US us. - * @note The nrf_radio_signal_callback_t(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_START) call has a latency relative to the - * specified radio timeslot start, but this does not affect the actual start time of the timeslot. - * @note NRF_TIMER0 is reset at the start of the radio timeslot, and is clocked at 1MHz from the high frequency - * (16 MHz) clock source. If p_request->hfclk_force_xtal is true, the high frequency clock is - * guaranteed to be clocked from the external crystal. - * @note The SoftDevice will neither access the NRF_RADIO peripheral nor the NRF_TIMER0 peripheral - * during the radio timeslot. - * - * @param[in] p_request Pointer to the request parameters. - * - * @retval ::NRF_ERROR_FORBIDDEN If session not opened or the session is not IDLE. - * @retval ::NRF_ERROR_INVALID_ADDR If the p_request pointer is invalid. - * @retval ::NRF_ERROR_INVALID_PARAM If the parameters of p_request are not valid. - * @retval ::NRF_SUCCESS Otherwise. - */ - SVCALL(SD_RADIO_REQUEST, uint32_t, sd_radio_request(nrf_radio_request_t const * p_request)); - -/**@brief Write register protected by the SoftDevice - * - * This function writes to a register that is write-protected by the SoftDevice. Please refer to your - * SoftDevice Specification for more details about which registers that are protected by SoftDevice. - * This function can write to the following protected peripheral: - * - ACL - * - * @note Protected registers may be read directly. - * @note Register that are write-once will return @ref NRF_SUCCESS on second set, even the value in - * the register has not changed. See the Product Specification for more details about register - * properties. - * - * @param[in] p_register Pointer to register to be written. - * @param[in] value Value to be written to the register. - * - * @retval ::NRF_ERROR_INVALID_ADDR This function can not write to the reguested register. - * @retval ::NRF_SUCCESS Value successfully written to register. - * - */ -SVCALL(SD_PROTECTED_REGISTER_WRITE, uint32_t, sd_protected_register_write(volatile uint32_t * p_register, uint32_t value)); - -/**@} */ - -#ifdef __cplusplus -} -#endif -#endif // NRF_SOC_H__ - -/**@} */ diff --git a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_svc.h b/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_svc.h deleted file mode 100755 index 292c6929..00000000 --- a/tinyusb/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/nrf_svc.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Copyright (c) 2012 - 2017, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef NRF_SVC__ -#define NRF_SVC__ - -#include "stdint.h" - -#ifdef __cplusplus -extern "C" { -#endif - -#ifdef SVCALL_AS_NORMAL_FUNCTION -#define SVCALL(number, return_type, signature) return_type signature -#else - -#ifndef SVCALL -#if defined (__CC_ARM) -#define SVCALL(number, return_type, signature) return_type __svc(number) signature -#elif defined (__GNUC__) -#ifdef __cplusplus -#define GCC_CAST_CPP (uint16_t) -#else -#define GCC_CAST_CPP -#endif -#define SVCALL(number, return_type, signature) \ - _Pragma("GCC diagnostic push") \ - _Pragma("GCC diagnostic ignored \"-Wreturn-type\"") \ - __attribute__((naked)) \ - __attribute__((unused)) \ - static return_type signature \ - { \ - __asm( \ - "svc %0\n" \ - "bx r14" : : "I" (GCC_CAST_CPP number) : "r0" \ - ); \ - } \ - _Pragma("GCC diagnostic pop") - -#elif defined (__ICCARM__) -#define PRAGMA(x) _Pragma(#x) -#define SVCALL(number, return_type, signature) \ -PRAGMA(swi_number = (number)) \ - __swi return_type signature; -#else -#define SVCALL(number, return_type, signature) return_type signature -#endif -#endif // SVCALL - -#endif // SVCALL_AS_NORMAL_FUNCTION - -#ifdef __cplusplus -} -#endif -#endif // NRF_SVC__ diff --git a/tinyusb/hw/mcu/nordic/nrfx_config.h b/tinyusb/hw/mcu/nordic/nrfx_config.h deleted file mode 100755 index 6a974ba7..00000000 --- a/tinyusb/hw/mcu/nordic/nrfx_config.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef NRFX_CONFIG_H__ -#define NRFX_CONFIG_H__ - -#define NRFX_POWER_ENABLED 1 -#define NRFX_POWER_DEFAULT_CONFIG_IRQ_PRIORITY 7 - -#define NRFX_CLOCK_ENABLED 0 - -#define NRFX_UARTE_ENABLED 1 -#define NRFX_UARTE0_ENABLED 1 - -#define NRFX_UARTE1_ENABLED 0 -#define NRFX_UARTE2_ENABLED 0 -#define NRFX_UARTE3_ENABLED 0 - -#define NRFX_PRS_ENABLED 0 - -#endif // NRFX_CONFIG_H__ diff --git a/tinyusb/hw/mcu/nordic/nrfx_glue.h b/tinyusb/hw/mcu/nordic/nrfx_glue.h deleted file mode 100755 index cdf49b4a..00000000 --- a/tinyusb/hw/mcu/nordic/nrfx_glue.h +++ /dev/null @@ -1,227 +0,0 @@ -/* - * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the copyright holder nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef NRFX_GLUE_H__ -#define NRFX_GLUE_H__ - -// THIS IS A TEMPLATE FILE. -// It should be copied to a suitable location within the host environment into -// which nrfx is integrated, and the following macros should be provided with -// appropriate implementations. -// And this comment should be removed from the customized file. - -#ifdef __cplusplus -extern "C" { -#endif - -/** - * @defgroup nrfx_glue nrfx_glue.h - * @{ - * @ingroup nrfx - * - * @brief This file contains macros that should be implemented according to - * the needs of the host environment into which @em nrfx is integrated. - */ - -// Uncomment this line to use the standard MDK way of binding IRQ handlers -// at linking time. -#include <soc/nrfx_irqs.h> - -//------------------------------------------------------------------------------ - -/** - * @brief Macro for placing a runtime assertion. - * - * @param expression Expression to evaluate. - */ -#define NRFX_ASSERT(expression) - -/** - * @brief Macro for placing a compile time assertion. - * - * @param expression Expression to evaluate. - */ -#define NRFX_STATIC_ASSERT(expression) - -//------------------------------------------------------------------------------ - -/** - * @brief Macro for setting the priority of a specific IRQ. - * - * @param irq_number IRQ number. - * @param priority Priority to set. - */ -#define NRFX_IRQ_PRIORITY_SET(irq_number, priority) _NRFX_IRQ_PRIORITY_SET(irq_number, priority) -static inline void _NRFX_IRQ_PRIORITY_SET(IRQn_Type irq_number, - uint8_t priority) -{ - NRFX_ASSERT(INTERRUPT_PRIORITY_IS_VALID(priority)); - NVIC_SetPriority(irq_number, priority); -} - -/** - * @brief Macro for enabling a specific IRQ. - * - * @param irq_number IRQ number. - */ -#define NRFX_IRQ_ENABLE(irq_number) _NRFX_IRQ_ENABLE(irq_number) -static inline void _NRFX_IRQ_ENABLE(IRQn_Type irq_number) -{ - NVIC_ClearPendingIRQ(irq_number); - NVIC_EnableIRQ(irq_number); -} - -/** - * @brief Macro for checking if a specific IRQ is enabled. - * - * @param irq_number IRQ number. - * - * @retval true If the IRQ is enabled. - * @retval false Otherwise. - */ -#define NRFX_IRQ_IS_ENABLED(irq_number) _NRFX_IRQ_IS_ENABLED(irq_number) -static inline bool _NRFX_IRQ_IS_ENABLED(IRQn_Type irq_number) -{ - return 0 != (NVIC->ISER[irq_number / 32] & (1UL << (irq_number % 32))); -} - -/** - * @brief Macro for disabling a specific IRQ. - * - * @param irq_number IRQ number. - */ -#define NRFX_IRQ_DISABLE(irq_number) _NRFX_IRQ_DISABLE(irq_number) -static inline void _NRFX_IRQ_DISABLE(IRQn_Type irq_number) -{ - NVIC_DisableIRQ(irq_number); -} - -/** - * @brief Macro for setting a specific IRQ as pending. - * - * @param irq_number IRQ number. - */ -#define NRFX_IRQ_PENDING_SET(irq_number) _NRFX_IRQ_PENDING_SET(irq_number) -static inline void _NRFX_IRQ_PENDING_SET(IRQn_Type irq_number) -{ - NVIC_SetPendingIRQ(irq_number); -} - -/** - * @brief Macro for clearing the pending status of a specific IRQ. - * - * @param irq_number IRQ number. - */ -#define NRFX_IRQ_PENDING_CLEAR(irq_number) _NRFX_IRQ_PENDING_CLEAR(irq_number) -static inline void _NRFX_IRQ_PENDING_CLEAR(IRQn_Type irq_number) -{ - NVIC_ClearPendingIRQ(irq_number); -} - -/** - * @brief Macro for checking the pending status of a specific IRQ. - * - * @retval true If the IRQ is pending. - * @retval false Otherwise. - */ -#define NRFX_IRQ_IS_PENDING(irq_number) _NRFX_IRQ_IS_PENDING(irq_number) -static inline bool _NRFX_IRQ_IS_PENDING(IRQn_Type irq_number) -{ - return (NVIC_GetPendingIRQ(irq_number) == 1); -} - -/** - * @brief Macro for entering into a critical section. - */ -#define NRFX_CRITICAL_SECTION_ENTER() - -/** - * @brief Macro for exiting from a critical section. - */ -#define NRFX_CRITICAL_SECTION_EXIT() - -//------------------------------------------------------------------------------ - -/** - * @brief When set to a non-zero value, this macro specifies that - * @ref nrfx_coredep_delay_us uses a precise DWT-based solution. - * A compilation error is generated if the DWT unit is not present - * in the SoC used. - */ -#define NRFX_DELAY_DWT_BASED 0 - -/** - * @brief Macro for delaying the code execution for at least the specified time. - * - * @param us_time Number of microseconds to wait. - */ -#include <soc/nrfx_coredep.h> -#define NRFX_DELAY_US(us_time) nrfx_coredep_delay_us(us_time) - -//------------------------------------------------------------------------------ - -/** - * @brief When set to a non-zero value, this macro specifies that the - * @ref nrfx_error_codes and the @ref nrfx_err_t type itself are defined - * in a customized way and the default definitions from @c <nrfx_error.h> - * should not be used. - */ -#define NRFX_CUSTOM_ERROR_CODES 0 - -//------------------------------------------------------------------------------ - -/** - * @brief Bitmask defining PPI channels reserved to be used outside of nrfx. - */ -#define NRFX_PPI_CHANNELS_USED 0 - -/** - * @brief Bitmask defining PPI groups reserved to be used outside of nrfx. - */ -#define NRFX_PPI_GROUPS_USED 0 - -/** - * @brief Bitmask defining SWI instances reserved to be used outside of nrfx. - */ -#define NRFX_SWI_USED 0 - -/** - * @brief Bitmask defining TIMER instances reserved to be used outside of nrfx. - */ -#define NRFX_TIMERS_USED 0 - -/** @} */ - -#ifdef __cplusplus -} -#endif - -#endif // NRFX_GLUE_H__ diff --git a/tinyusb/hw/mcu/nordic/nrfx_log.h b/tinyusb/hw/mcu/nordic/nrfx_log.h deleted file mode 100755 index 3bc1b424..00000000 --- a/tinyusb/hw/mcu/nordic/nrfx_log.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Copyright (c) 2017 - 2019, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the copyright holder nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef NRFX_LOG_H__ -#define NRFX_LOG_H__ - -// THIS IS A TEMPLATE FILE. -// It should be copied to a suitable location within the host environment into -// which nrfx is integrated, and the following macros should be provided with -// appropriate implementations. -// And this comment should be removed from the customized file. - -#ifdef __cplusplus -extern "C" { -#endif - -/** - * @defgroup nrfx_log nrfx_log.h - * @{ - * @ingroup nrfx - * - * @brief This file contains macros that should be implemented according to - * the needs of the host environment into which @em nrfx is integrated. - */ - -/** - * @brief Macro for logging a message with the severity level ERROR. - * - * @param format printf-style format string, optionally followed by arguments - * to be formatted and inserted in the resulting string. - */ -#define NRFX_LOG_ERROR(format, ...) - -/** - * @brief Macro for logging a message with the severity level WARNING. - * - * @param format printf-style format string, optionally followed by arguments - * to be formatted and inserted in the resulting string. - */ -#define NRFX_LOG_WARNING(format, ...) - -/** - * @brief Macro for logging a message with the severity level INFO. - * - * @param format printf-style format string, optionally followed by arguments - * to be formatted and inserted in the resulting string. - */ -#define NRFX_LOG_INFO(format, ...) - -/** - * @brief Macro for logging a message with the severity level DEBUG. - * - * @param format printf-style format string, optionally followed by arguments - * to be formatted and inserted in the resulting string. - */ -#define NRFX_LOG_DEBUG(format, ...) - - -/** - * @brief Macro for logging a memory dump with the severity level ERROR. - * - * @param[in] p_memory Pointer to the memory region to be dumped. - * @param[in] length Length of the memory region in bytes. - */ -#define NRFX_LOG_HEXDUMP_ERROR(p_memory, length) - -/** - * @brief Macro for logging a memory dump with the severity level WARNING. - * - * @param[in] p_memory Pointer to the memory region to be dumped. - * @param[in] length Length of the memory region in bytes. - */ -#define NRFX_LOG_HEXDUMP_WARNING(p_memory, length) - -/** - * @brief Macro for logging a memory dump with the severity level INFO. - * - * @param[in] p_memory Pointer to the memory region to be dumped. - * @param[in] length Length of the memory region in bytes. - */ -#define NRFX_LOG_HEXDUMP_INFO(p_memory, length) - -/** - * @brief Macro for logging a memory dump with the severity level DEBUG. - * - * @param[in] p_memory Pointer to the memory region to be dumped. - * @param[in] length Length of the memory region in bytes. - */ -#define NRFX_LOG_HEXDUMP_DEBUG(p_memory, length) - - -/** - * @brief Macro for getting the textual representation of a given error code. - * - * @param[in] error_code Error code. - * - * @return String containing the textual representation of the error code. - */ -#define NRFX_LOG_ERROR_STRING_GET(error_code) - -/** @} */ - -#ifdef __cplusplus -} -#endif - -#endif // NRFX_LOG_H__ |