2 files changed, 0 insertions, 159 deletions
diff --git a/tinyusb b/tinyusb
new file mode 160000
+Subproject f8288be03f28ad7b944e6925f49422dfa39202c
diff --git a/tinyusb/src/class/msc/msc_device.h b/tinyusb/src/class/msc/msc_device.h
deleted file mode 100755
index 8f90ef4a..00000000
--- a/tinyusb/src/class/msc/msc_device.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#ifndef _TUSB_MSC_DEVICE_H_
-#define _TUSB_MSC_DEVICE_H_
-
-#include "common/tusb_common.h"
-#include "msc.h"
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------+
-// Class Driver Configuration
-//--------------------------------------------------------------------+
-
-#if !defined(CFG_TUD_MSC_EP_BUFSIZE) & defined(CFG_TUD_MSC_BUFSIZE)
-  // TODO warn user to use new name later on
-  // #warning CFG_TUD_MSC_BUFSIZE is renamed to CFG_TUD_MSC_EP_BUFSIZE, please update to use the new name
-  #define CFG_TUD_MSC_EP_BUFSIZE  CFG_TUD_MSC_BUFSIZE
-#endif
-
-#ifndef CFG_TUD_MSC_EP_BUFSIZE
-  #error CFG_TUD_MSC_EP_BUFSIZE must be defined, value of a block size should work well, the more the better
-#endif
-
-TU_VERIFY_STATIC(CFG_TUD_MSC_EP_BUFSIZE < UINT16_MAX, "Size is not correct");
-
-//--------------------------------------------------------------------+
-// Application API
-//--------------------------------------------------------------------+
-
-// Set SCSI sense response
-bool tud_msc_set_sense(uint8_t lun, uint8_t sense_key, uint8_t add_sense_code, uint8_t add_sense_qualifier);
-
-//--------------------------------------------------------------------+
-// Application Callbacks (WEAK is optional)
-//--------------------------------------------------------------------+
-
-// Invoked when received SCSI READ10 command
-// - Address = lba * BLOCK_SIZE + offset
-//   - offset is only needed if CFG_TUD_MSC_EP_BUFSIZE is smaller than BLOCK_SIZE.
-//
-// - Application fill the buffer (up to bufsize) with address contents and return number of read byte. If
-//   - read < bufsize : These bytes are transferred first and callback invoked again for remaining data.
-//
-//   - read == 0      : Indicate application is not ready yet e.g disk I/O busy.
-//                      Callback invoked again with the same parameters later on.
-//
-//   - read < 0       : Indicate application error e.g invalid address. This request will be STALLed
-//                      and return failed status in command status wrapper phase.
-int32_t tud_msc_read10_cb (uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize);
-
-// Invoked when received SCSI WRITE10 command
-// - Address = lba * BLOCK_SIZE + offset
-//   - offset is only needed if CFG_TUD_MSC_EP_BUFSIZE is smaller than BLOCK_SIZE.
-//
-// - Application write data from buffer to address contents (up to bufsize) and return number of written byte. If
-//   - write < bufsize : callback invoked again with remaining data later on.
-//
-//   - write == 0      : Indicate application is not ready yet e.g disk I/O busy.
-//                       Callback invoked again with the same parameters later on.
-//
-//   - write < 0       : Indicate application error e.g invalid address. This request will be STALLed
-//                       and return failed status in command status wrapper phase.
-//
-// TODO change buffer to const uint8_t*
-int32_t tud_msc_write10_cb (uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize);
-
-// Invoked when received SCSI_CMD_INQUIRY
-// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively
-void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]);
-
-// Invoked when received Test Unit Ready command.
-// return true allowing host to read/write this LUN e.g SD card inserted
-bool tud_msc_test_unit_ready_cb(uint8_t lun);
-
-// Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size
-// Application update block count and block size
-void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size);
-
-/**
- * Invoked when received an SCSI command not in built-in list below.
- * - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, TEST_UNIT_READY, START_STOP_UNIT, MODE_SENSE6, REQUEST_SENSE
- * - READ10 and WRITE10 has their own callbacks
- *
- * \param[in]   lun         Logical unit number
- * \param[in]   scsi_cmd    SCSI command contents which application must examine to response accordingly
- * \param[out]  buffer      Buffer for SCSI Data Stage.
- *                            - For INPUT: application must fill this with response.
- *                            - For OUTPUT it holds the Data from host
- * \param[in]   bufsize     Buffer's length.
- *
- * \return      Actual bytes processed, can be zero for no-data command.
- * \retval      negative    Indicate error e.g unsupported command, tinyusb will \b STALL the corresponding
- *                          endpoint and return failed status in command status wrapper phase.
- */
-int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize);
-
-/*------------- Optional callbacks -------------*/
-
-// Invoked when received GET_MAX_LUN request, required for multiple LUNs implementation
-TU_ATTR_WEAK uint8_t tud_msc_get_maxlun_cb(void);
-
-// Invoked when received Start Stop Unit command
-// - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage
-// - Start = 1 : active mode, if load_eject = 1 : load disk storage
-TU_ATTR_WEAK bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject);
-
-// Invoked when Read10 command is complete
-TU_ATTR_WEAK void tud_msc_read10_complete_cb(uint8_t lun);
-
-// Invoke when Write10 command is complete, can be used to flush flash caching
-TU_ATTR_WEAK void tud_msc_write10_complete_cb(uint8_t lun);
-
-// Invoked when command in tud_msc_scsi_cb is complete
-TU_ATTR_WEAK void tud_msc_scsi_complete_cb(uint8_t lun, uint8_t const scsi_cmd[16]);
-
-// Hook to make a mass storage device read-only. TODO remove
-TU_ATTR_WEAK bool tud_msc_is_writable_cb(uint8_t lun);
-
-//--------------------------------------------------------------------+
-// Internal Class Driver API
-//--------------------------------------------------------------------+
-void     mscd_init            (void);
-void     mscd_reset           (uint8_t rhport);
-uint16_t mscd_open            (uint8_t rhport, tusb_desc_interface_t const * itf_desc, uint16_t max_len);
-bool     mscd_control_xfer_cb (uint8_t rhport, uint8_t stage, tusb_control_request_t const * p_request);
-bool     mscd_xfer_cb         (uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t xferred_bytes);
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_MSC_DEVICE_H_ */