2 files changed, 0 insertions, 181 deletions
diff --git a/tinyusb b/tinyusb
new file mode 160000
+Subproject f8288be03f28ad7b944e6925f49422dfa39202c
diff --git a/tinyusb/src/device/dcd.h b/tinyusb/src/device/dcd.h
deleted file mode 100755
index 66767c1f..00000000
--- a/tinyusb/src/device/dcd.h
+++ /dev/null
@@ -1,181 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#ifndef _TUSB_DCD_H_
-#define _TUSB_DCD_H_
-
-#include "common/tusb_common.h"
-#include "osal/osal.h"
-#include "common/tusb_fifo.h"
-#include "dcd_attr.h"
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-//--------------------------------------------------------------------+
-// Configuration
-//--------------------------------------------------------------------+
-
-#ifndef CFG_TUD_ENDPPOINT_MAX
-  #define CFG_TUD_ENDPPOINT_MAX   DCD_ATTR_ENDPOINT_MAX
-#endif
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF PROTYPES
-//--------------------------------------------------------------------+
-
-typedef enum
-{
-  DCD_EVENT_INVALID = 0,
-  DCD_EVENT_BUS_RESET,
-  DCD_EVENT_UNPLUGGED,
-  DCD_EVENT_SOF,
-  DCD_EVENT_SUSPEND, // TODO LPM Sleep L1 support
-  DCD_EVENT_RESUME,
-
-  DCD_EVENT_SETUP_RECEIVED,
-  DCD_EVENT_XFER_COMPLETE,
-
-  // Not an DCD event, just a convenient way to defer ISR function
-  USBD_EVENT_FUNC_CALL,
-
-  DCD_EVENT_COUNT
-} dcd_eventid_t;
-
-typedef struct TU_ATTR_ALIGNED(4)
-{
-  uint8_t rhport;
-  uint8_t event_id;
-
-  union
-  {
-    // BUS RESET
-    struct {
-      tusb_speed_t speed;
-    } bus_reset;
-
-    // SETUP_RECEIVED
-    tusb_control_request_t setup_received;
-
-    // XFER_COMPLETE
-    struct {
-      uint8_t  ep_addr;
-      uint8_t  result;
-      uint32_t len;
-    }xfer_complete;
-
-    // FUNC_CALL
-    struct {
-      void (*func) (void*);
-      void* param;
-    }func_call;
-  };
-} dcd_event_t;
-
-//TU_VERIFY_STATIC(sizeof(dcd_event_t) <= 12, "size is not correct");
-
-//--------------------------------------------------------------------+
-// Controller API
-//--------------------------------------------------------------------+
-
-// Initialize controller to device mode
-void dcd_init       (uint8_t rhport);
-
-// Interrupt Handler
-void dcd_int_handler(uint8_t rhport);
-
-// Enable device interrupt
-void dcd_int_enable (uint8_t rhport);
-
-// Disable device interrupt
-void dcd_int_disable(uint8_t rhport);
-
-// Receive Set Address request, mcu port must also include status IN response
-void dcd_set_address(uint8_t rhport, uint8_t dev_addr);
-
-// Wake up host
-void dcd_remote_wakeup(uint8_t rhport);
-
-// Connect by enabling internal pull-up resistor on D+/D-
-void dcd_connect(uint8_t rhport) TU_ATTR_WEAK;
-
-// Disconnect by disabling internal pull-up resistor on D+/D-
-void dcd_disconnect(uint8_t rhport) TU_ATTR_WEAK;
-
-//--------------------------------------------------------------------+
-// Endpoint API
-//--------------------------------------------------------------------+
-
-// Invoked when a control transfer's status stage is complete.
-// May help DCD to prepare for next control transfer, this API is optional.
-void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const * request) TU_ATTR_WEAK;
-
-// Configure endpoint's registers according to descriptor
-bool dcd_edpt_open            (uint8_t rhport, tusb_desc_endpoint_t const * desc_ep);
-
-// Close an endpoint.
-// Since it is weak, caller must TU_ASSERT this function's existence before calling it.
-void dcd_edpt_close           (uint8_t rhport, uint8_t ep_addr) TU_ATTR_WEAK;
-
-// Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack
-bool dcd_edpt_xfer            (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes);
-
-// Submit an transfer using fifo, When complete dcd_event_xfer_complete() is invoked to notify the stack
-// This API is optional, may be useful for register-based for transferring data.
-bool dcd_edpt_xfer_fifo       (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) TU_ATTR_WEAK;
-
-// Stall endpoint
-void dcd_edpt_stall           (uint8_t rhport, uint8_t ep_addr);
-
-// clear stall, data toggle is also reset to DATA0
-// This API never calls with control endpoints, since it is auto cleared when receiving setup packet
-void dcd_edpt_clear_stall     (uint8_t rhport, uint8_t ep_addr);
-
-//--------------------------------------------------------------------+
-// Event API (implemented by stack)
-//--------------------------------------------------------------------+
-
-// Called by DCD to notify device stack
-extern void dcd_event_handler(dcd_event_t const * event, bool in_isr);
-
-// helper to send bus signal event
-extern void dcd_event_bus_signal (uint8_t rhport, dcd_eventid_t eid, bool in_isr);
-
-// helper to send bus reset event
-extern void dcd_event_bus_reset (uint8_t rhport, tusb_speed_t speed, bool in_isr);
-
-// helper to send setup received
-extern void dcd_event_setup_received(uint8_t rhport, uint8_t const * setup, bool in_isr);
-
-// helper to send transfer complete event
-extern void dcd_event_xfer_complete (uint8_t rhport, uint8_t ep_addr, uint32_t xferred_bytes, uint8_t result, bool in_isr);
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_DCD_H_ */