diff options
Diffstat (limited to 'tinyusb/src/portable/dialog')
-rwxr-xr-x | tinyusb/src/portable/dialog/da146xx/dcd_da146xx.c | 1067 |
1 files changed, 1067 insertions, 0 deletions
diff --git a/tinyusb/src/portable/dialog/da146xx/dcd_da146xx.c b/tinyusb/src/portable/dialog/da146xx/dcd_da146xx.c new file mode 100755 index 00000000..5fcf3bc5 --- /dev/null +++ b/tinyusb/src/portable/dialog/da146xx/dcd_da146xx.c @@ -0,0 +1,1067 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Jerzy Kasenberg + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb_option.h" + +#if TUSB_OPT_DEVICE_ENABLED && CFG_TUSB_MCU == OPT_MCU_DA1469X + +#include "mcu/mcu.h" + +#include "device/dcd.h" + +/*------------------------------------------------------------------*/ +/* MACRO TYPEDEF CONSTANT ENUM + *------------------------------------------------------------------*/ + +// Since TinyUSB doesn't use SOF for now, and this interrupt too often (1ms interval) +// We disable SOF for now until needed later on +#define USE_SOF 0 + +// Size of RX or TX FIFO. +#define FIFO_SIZE 64 + +#ifndef TU_DA1469X_FIFO_READ_THRESHOLD +// RX FIFO is 64 bytes. When endpoint size is greater then 64, FIFO warning interrupt +// is enabled to allow read incoming data during frame reception. +// It is possible to stay in interrupt reading whole packet at once, but it may be +// more efficient for MCU to read as much data as possible and when FIFO is hardly +// filled exit interrupt handler waiting for next FIFO warning level interrupt +// or packet end. +// When running at 96MHz code that reads FIFO based on number of bytes stored in +// USB_RXSx_REG.USB_RXCOUNT takes enough time to fill FIFO with two additional bytes. +// Settings this threshold above this allows to leave interrupt handler and wait +// for more bytes to before next ISR. This allows reduce overall ISR time to 1/3 +// of time that would be needed if ISR read as fast as possible. +#define TU_DA1469X_FIFO_READ_THRESHOLD 4 +#endif + +#define EP_MAX 4 + +#define NFSR_NODE_RESET 0 +#define NFSR_NODE_RESUME 1 +#define NFSR_NODE_OPERATIONAL 2 +#define NFSR_NODE_SUSPEND 3 + +static TU_ATTR_ALIGNED(4) uint8_t _setup_packet[8]; + +typedef struct +{ + union + { + __IOM uint32_t epc_in; + __IOM uint32_t USB_EPC0_REG; /*!< (@ 0x00000080) Endpoint Control 0 Register */ + __IOM uint32_t USB_EPC1_REG; /*!< (@ 0x000000A0) Endpoint Control Register 1 */ + __IOM uint32_t USB_EPC3_REG; /*!< (@ 0x000000C0) Endpoint Control Register 3 */ + __IOM uint32_t USB_EPC5_REG; /*!< (@ 0x000000E0) Endpoint Control Register 5 */ + }; + union + { + __IOM uint32_t txd; + __IOM uint32_t USB_TXD0_REG; /*!< (@ 0x00000084) Transmit Data 0 Register */ + __IOM uint32_t USB_TXD1_REG; /*!< (@ 0x000000A4) Transmit Data Register 1 */ + __IOM uint32_t USB_TXD2_REG; /*!< (@ 0x000000C4) Transmit Data Register 2 */ + __IOM uint32_t USB_TXD3_REG; /*!< (@ 0x000000E4) Transmit Data Register 3 */ + }; + union + { + __IOM uint32_t txs; + __IOM uint32_t USB_TXS0_REG; /*!< (@ 0x00000088) Transmit Status 0 Register */ + __IOM uint32_t USB_TXS1_REG; /*!< (@ 0x000000A8) Transmit Status Register 1 */ + __IOM uint32_t USB_TXS2_REG; /*!< (@ 0x000000C8) Transmit Status Register 2 */ + __IOM uint32_t USB_TXS3_REG; /*!< (@ 0x000000E8) Transmit Status Register 3 */ + }; + union + { + __IOM uint32_t txc; + __IOM uint32_t USB_TXC0_REG; /*!< (@ 0x0000008C) Transmit command 0 Register */ + __IOM uint32_t USB_TXC1_REG; /*!< (@ 0x000000AC) Transmit Command Register 1 */ + __IOM uint32_t USB_TXC2_REG; /*!< (@ 0x000000CC) Transmit Command Register 2 */ + __IOM uint32_t USB_TXC3_REG; /*!< (@ 0x000000EC) Transmit Command Register 3 */ + }; + union + { + __IOM uint32_t epc_out; + __IOM uint32_t USB_EP0_NAK_REG; /*!< (@ 0x00000090) EP0 INNAK and OUTNAK Register */ + __IOM uint32_t USB_EPC2_REG; /*!< (@ 0x000000B0) Endpoint Control Register 2 */ + __IOM uint32_t USB_EPC4_REG; /*!< (@ 0x000000D0) Endpoint Control Register 4 */ + __IOM uint32_t USB_EPC6_REG; /*!< (@ 0x000000F0) Endpoint Control Register 6 */ + }; + union + { + __IOM uint32_t rxd; + __IOM uint32_t USB_RXD0_REG; /*!< (@ 0x00000094) Receive Data 0 Register */ + __IOM uint32_t USB_RXD1_REG; /*!< (@ 0x000000B4) Receive Data Register,1 */ + __IOM uint32_t USB_RXD2_REG; /*!< (@ 0x000000D4) Receive Data Register 2 */ + __IOM uint32_t USB_RXD3_REG; /*!< (@ 0x000000F4) Receive Data Register 3 */ + }; + union + { + __IOM uint32_t rxs; + __IOM uint32_t USB_RXS0_REG; /*!< (@ 0x00000098) Receive Status 0 Register */ + __IOM uint32_t USB_RXS1_REG; /*!< (@ 0x000000B8) Receive Status Register 1 */ + __IOM uint32_t USB_RXS2_REG; /*!< (@ 0x000000D8) Receive Status Register 2 */ + __IOM uint32_t USB_RXS3_REG; /*!< (@ 0x000000F8) Receive Status Register 3 */ + }; + union + { + __IOM uint32_t rxc; + __IOM uint32_t USB_RXC0_REG; /*!< (@ 0x0000009C) Receive Command 0 Register */ + __IOM uint32_t USB_RXC1_REG; /*!< (@ 0x000000BC) Receive Command Register 1 */ + __IOM uint32_t USB_RXC2_REG; /*!< (@ 0x000000DC) Receive Command Register 2 */ + __IOM uint32_t USB_RXC3_REG; /*!< (@ 0x000000FC) Receive Command Register 3 */ + }; +} EPx_REGS; + +#define EP_REGS(first_ep_reg) (EPx_REGS*)(&USB->first_ep_reg) + +// DMA channel pair to use, channel 6 will be used for RX channel 7 for TX direction. +#ifndef TU_DA146XX_DMA_RX_CHANNEL +#define TU_DA146XX_DMA_RX_CHANNEL 6 +#endif +#define DA146XX_DMA_USB_MUX (0x6 << (TU_DA146XX_DMA_RX_CHANNEL * 2)) +#define DA146XX_DMA_USB_MUX_MASK (0xF << (TU_DA146XX_DMA_RX_CHANNEL * 2)) + +typedef struct +{ + __IOM uint32_t DMAx_A_START_REG; + __IOM uint32_t DMAx_B_START_REG; + __IOM uint32_t DMAx_INT_REG; + __IOM uint32_t DMAx_LEN_REG; + __IOM uint32_t DMAx_CTRL_REG; + __IOM uint32_t DMAx_IDX_REG; + __IM uint32_t RESERVED[2]; // Extend structure size for array like usage, registers for each channel are 0x20 bytes apart. +} da146xx_dma_channel_t; + +#define DMA_CHANNEL_REGS(n) ((da146xx_dma_channel_t *)(DMA) + n) +#define RX_DMA_REGS DMA_CHANNEL_REGS(TU_DA146XX_DMA_RX_CHANNEL) +#define TX_DMA_REGS DMA_CHANNEL_REGS((TU_DA146XX_DMA_RX_CHANNEL) + 1) + +#define RX_DMA_START ((1 << DMA_DMA0_CTRL_REG_DMA_ON_Pos) |\ + (0 << DMA_DMA0_CTRL_REG_BW_Pos) | \ + (1 << DMA_DMA0_CTRL_REG_DREQ_MODE_Pos) | \ + (1 << DMA_DMA0_CTRL_REG_BINC_Pos) | \ + (0 << DMA_DMA0_CTRL_REG_AINC_Pos) | \ + (0 << DMA_DMA0_CTRL_REG_CIRCULAR_Pos) | \ + (2 << DMA_DMA0_CTRL_REG_DMA_PRIO_Pos) | \ + (0 << DMA_DMA0_CTRL_REG_DMA_IDLE_Pos) | \ + (0 << DMA_DMA0_CTRL_REG_DMA_INIT_Pos) | \ + (0 << DMA_DMA0_CTRL_REG_REQ_SENSE_Pos) | \ + (0 << DMA_DMA0_CTRL_REG_BURST_MODE_Pos) | \ + (0 << DMA_DMA0_CTRL_REG_BUS_ERROR_DETECT_Pos)) + +#define TX_DMA_START ((1 << DMA_DMA0_CTRL_REG_DMA_ON_Pos) |\ + (0 << DMA_DMA0_CTRL_REG_BW_Pos) | \ + (1 << DMA_DMA0_CTRL_REG_DREQ_MODE_Pos) | \ + (0 << DMA_DMA0_CTRL_REG_BINC_Pos) | \ + (1 << DMA_DMA0_CTRL_REG_AINC_Pos) | \ + (0 << DMA_DMA0_CTRL_REG_CIRCULAR_Pos) | \ + (2 << DMA_DMA0_CTRL_REG_DMA_PRIO_Pos) | \ + (0 << DMA_DMA0_CTRL_REG_DMA_IDLE_Pos) | \ + (0 << DMA_DMA0_CTRL_REG_DMA_INIT_Pos) | \ + (1 << DMA_DMA0_CTRL_REG_REQ_SENSE_Pos) | \ + (0 << DMA_DMA0_CTRL_REG_BURST_MODE_Pos) | \ + (0 << DMA_DMA0_CTRL_REG_BUS_ERROR_DETECT_Pos)) + +// Dialog register fields and bit mask are very long. Filed masks repeat register names. +// Those convenience macros are a way to reduce complexity of register modification lines. +#define GET_BIT(val, field) (val & field ## _Msk) >> field ## _Pos +#define REG_GET_BIT(reg, field) (USB->reg & USB_ ## reg ## _ ## field ## _Msk) +#define REG_SET_BIT(reg, field) USB->reg |= USB_ ## reg ## _ ## field ## _Msk +#define REG_CLR_BIT(reg, field) USB->reg &= ~USB_ ## reg ## _ ## field ## _Msk +#define REG_SET_VAL(reg, field, val) USB->reg = (USB->reg & ~USB_ ## reg ## _ ## field ## _Msk) | (val << USB_ ## reg ## _ ## field ## _Pos) + +typedef struct { + EPx_REGS * regs; + uint8_t * buffer; + // Total length of current transfer + uint16_t total_len; + // Bytes transferred so far + uint16_t transferred; + uint16_t max_packet_size; + // Packet size sent or received so far. It is used to modify transferred field + // after ACK is received or when filling ISO endpoint with size larger then + // FIFO size. + uint16_t last_packet_size; + uint8_t ep_addr; + // DATA0/1 toggle bit 1 DATA1 is expected or transmitted + uint8_t data1 : 1; + // Endpoint is stalled + uint8_t stall : 1; + // ISO endpoint + uint8_t iso : 1; +} xfer_ctl_t; + +static struct +{ + bool vbus_present; + bool in_reset; + xfer_ctl_t xfer_status[EP_MAX][2]; + // Endpoints that use DMA, one for each direction + uint8_t dma_ep[2]; +} _dcd = +{ + .vbus_present = false, + .xfer_status = + { + { { .regs = EP_REGS(USB_EPC0_REG) }, { .regs = EP_REGS(USB_EPC0_REG) } }, + { { .regs = EP_REGS(USB_EPC1_REG) }, { .regs = EP_REGS(USB_EPC1_REG) } }, + { { .regs = EP_REGS(USB_EPC3_REG) }, { .regs = EP_REGS(USB_EPC3_REG) } }, + { { .regs = EP_REGS(USB_EPC5_REG) }, { .regs = EP_REGS(USB_EPC5_REG) } }, + } +}; + +// Two endpoint 0 descriptor definition for unified dcd_edpt_open() +static const tusb_desc_endpoint_t ep0OUT_desc = +{ + .bLength = sizeof(tusb_desc_endpoint_t), + .bDescriptorType = TUSB_DESC_ENDPOINT, + + .bEndpointAddress = 0x00, + .bmAttributes = { .xfer = TUSB_XFER_CONTROL }, + .wMaxPacketSize = { .size = CFG_TUD_ENDPOINT0_SIZE }, + .bInterval = 0 +}; + +static const tusb_desc_endpoint_t ep0IN_desc = +{ + .bLength = sizeof(tusb_desc_endpoint_t), + .bDescriptorType = TUSB_DESC_ENDPOINT, + + .bEndpointAddress = 0x80, + .bmAttributes = { .xfer = TUSB_XFER_CONTROL }, + .wMaxPacketSize = { .size = CFG_TUD_ENDPOINT0_SIZE }, + .bInterval = 0 +}; + +#define XFER_CTL_BASE(_ep, _dir) &_dcd.xfer_status[_ep][_dir] + +static void fill_tx_fifo(xfer_ctl_t * xfer) +{ + int left_to_send; + uint8_t const *src; + EPx_REGS *regs = xfer->regs; + uint8_t const epnum = tu_edpt_number(xfer->ep_addr); + + src = &xfer->buffer[xfer->transferred]; + left_to_send = xfer->total_len - xfer->transferred; + if (left_to_send > xfer->max_packet_size - xfer->last_packet_size) + { + left_to_send = xfer->max_packet_size - xfer->last_packet_size; + } + + // Loop checks TCOUNT all the time since this value is saturated to 31 + // and can't be read just once before. + while ((regs->txs & USB_USB_TXS1_REG_USB_TCOUNT_Msk) > 0 && left_to_send > 0) + { + regs->txd = *src++; + xfer->last_packet_size++; + left_to_send--; + } + if (epnum != 0) + { + if (left_to_send > 0) + { + // Max packet size is set to value greater then FIFO. Enable fifo level warning + // to handle larger packets. + regs->txc |= (3 << USB_USB_TXC1_REG_USB_TFWL_Pos); + USB->USB_FWMSK_REG |= 1 << (epnum - 1 + USB_USB_FWMSK_REG_USB_M_TXWARN31_Pos); + } + else + { + xfer->regs->txc &= ~USB_USB_TXC1_REG_USB_TFWL_Msk; + USB->USB_FWMSK_REG &= ~(1 << (epnum - 1 + USB_USB_FWMSK_REG_USB_M_TXWARN31_Pos)); + // Whole packet already in fifo, no need to refill it later. Mark last. + regs->txc |= USB_USB_TXC1_REG_USB_LAST_Msk; + } + } +} + +static bool try_allocate_dma(uint8_t epnum, uint8_t dir) +{ + // TODO: Disable interrupts while checking + if (_dcd.dma_ep[dir] == 0) + { + _dcd.dma_ep[dir] = epnum; + if (dir == TUSB_DIR_OUT) + USB->USB_DMA_CTRL_REG = (USB->USB_DMA_CTRL_REG & ~USB_USB_DMA_CTRL_REG_USB_DMA_RX_Msk) | + ((epnum - 1) << USB_USB_DMA_CTRL_REG_USB_DMA_RX_Pos); + else + USB->USB_DMA_CTRL_REG = (USB->USB_DMA_CTRL_REG & ~USB_USB_DMA_CTRL_REG_USB_DMA_TX_Msk) | + ((epnum - 1) << USB_USB_DMA_CTRL_REG_USB_DMA_TX_Pos); + USB->USB_DMA_CTRL_REG |= USB_USB_DMA_CTRL_REG_USB_DMA_EN_Msk; + } + return _dcd.dma_ep[dir] == epnum; +} + +static void start_rx_dma(volatile void *src, void *dst, uint16_t size) +{ + // Setup SRC and DST registers + RX_DMA_REGS->DMAx_A_START_REG = (uint32_t)src; + RX_DMA_REGS->DMAx_B_START_REG = (uint32_t)dst; + // Don't need DMA interrupt, read end is determined by RX_LAST or RX_ERR events. + RX_DMA_REGS->DMAx_INT_REG = size - 1; + RX_DMA_REGS->DMAx_LEN_REG = size - 1; + RX_DMA_REGS->DMAx_CTRL_REG = RX_DMA_START; +} + +static void start_rx_packet(xfer_ctl_t *xfer) +{ + uint8_t const epnum = tu_edpt_number(xfer->ep_addr); + uint16_t remaining = xfer->total_len - xfer->transferred; + uint16_t size = tu_min16(remaining, xfer->max_packet_size); + + xfer->last_packet_size = 0; + if (xfer->max_packet_size > FIFO_SIZE && remaining > FIFO_SIZE) + { + if (try_allocate_dma(epnum, TUSB_DIR_OUT)) + { + start_rx_dma(&xfer->regs->rxd, xfer->buffer + xfer->transferred, size); + } + else + { + // Other endpoint is using DMA in that direction, fall back to interrupts. + // For endpoint size greater then FIFO size enable FIFO level warning interrupt + // when FIFO has less then 17 bytes free. + xfer->regs->rxc |= USB_USB_RXC1_REG_USB_RFWL_Msk; + USB->USB_FWMSK_REG |= 1 << (epnum - 1 + USB_USB_FWMSK_REG_USB_M_RXWARN31_Pos); + } + } + else if (epnum != 0) + { + // If max_packet_size would fit in FIFO no need for FIFO level warning interrupt. + xfer->regs->rxc &= ~USB_USB_RXC1_REG_USB_RFWL_Msk; + USB->USB_FWMSK_REG &= ~(1 << (epnum - 1 + USB_USB_FWMSK_REG_USB_M_RXWARN31_Pos)); + } + xfer->regs->rxc |= USB_USB_RXC1_REG_USB_RX_EN_Msk; +} + +static void start_tx_dma(void *src, volatile void *dst, uint16_t size) +{ + // Setup SRC and DST registers + TX_DMA_REGS->DMAx_A_START_REG = (uint32_t)src; + TX_DMA_REGS->DMAx_B_START_REG = (uint32_t)dst; + // Interrupt not needed + TX_DMA_REGS->DMAx_INT_REG = size; + TX_DMA_REGS->DMAx_LEN_REG = size - 1; + TX_DMA_REGS->DMAx_CTRL_REG = TX_DMA_START; +} + +static void start_tx_packet(xfer_ctl_t *xfer) +{ + uint8_t const epnum = tu_edpt_number(xfer->ep_addr); + uint16_t remaining = xfer->total_len - xfer->transferred; + uint16_t size = tu_min16(remaining, xfer->max_packet_size); + EPx_REGS *regs = xfer->regs; + + xfer->last_packet_size = 0; + + regs->txc = USB_USB_TXC1_REG_USB_FLUSH_Msk; + regs->txc = USB_USB_TXC1_REG_USB_IGN_ISOMSK_Msk; + if (xfer->data1) xfer->regs->txc |= USB_USB_TXC1_REG_USB_TOGGLE_TX_Msk; + + if (xfer->max_packet_size > FIFO_SIZE && remaining > FIFO_SIZE && try_allocate_dma(epnum, TUSB_DIR_IN)) + { + // Whole packet will be put in FIFO by DMA. Set LAST bit before start. + start_tx_dma(xfer->buffer + xfer->transferred, ®s->txd, size); + regs->txc |= USB_USB_TXC1_REG_USB_LAST_Msk; + } + else + { + fill_tx_fifo(xfer); + } + regs->txc |= USB_USB_TXC1_REG_USB_TX_EN_Msk; +} + +static void read_rx_fifo(xfer_ctl_t *xfer, uint16_t bytes_in_fifo) +{ + EPx_REGS *regs = xfer->regs; + uint16_t remaining = xfer->total_len - xfer->transferred - xfer->last_packet_size; + uint16_t receive_this_time = bytes_in_fifo; + + if (remaining < bytes_in_fifo) receive_this_time = remaining; + + uint8_t *buf = xfer->buffer + xfer->transferred + xfer->last_packet_size; + + for (int i = 0; i < receive_this_time; ++i) buf[i] = regs->rxd; + + xfer->last_packet_size += receive_this_time; +} + +static void handle_ep0_rx(void) +{ + int fifo_bytes; + uint32_t rxs0 = USB->USB_RXS0_REG; + + xfer_ctl_t *xfer = XFER_CTL_BASE(0, TUSB_DIR_OUT); + + fifo_bytes = GET_BIT(rxs0, USB_USB_RXS0_REG_USB_RCOUNT); + if (rxs0 & USB_USB_RXS0_REG_USB_SETUP_Msk) + { + xfer_ctl_t *xfer_in = XFER_CTL_BASE(0, TUSB_DIR_IN); + // Setup packet is in + for (int i = 0; i < fifo_bytes; ++i) _setup_packet[i] = USB->USB_RXD0_REG; + + xfer->stall = 0; + xfer->data1 = 1; + xfer_in->stall = 0; + xfer_in->data1 = 1; + REG_SET_BIT(USB_TXC0_REG, USB_TOGGLE_TX0); + REG_CLR_BIT(USB_EPC0_REG, USB_STALL); + dcd_event_setup_received(0, _setup_packet,true); + } + else + { + if (GET_BIT(rxs0, USB_USB_RXS0_REG_USB_TOGGLE_RX0) != xfer->data1) + { + // Toggle bit does not match discard packet + REG_SET_BIT(USB_RXC0_REG, USB_FLUSH); + xfer->last_packet_size = 0; + } + else + { + read_rx_fifo(xfer, fifo_bytes); + if (rxs0 & USB_USB_RXS0_REG_USB_RX_LAST_Msk) + { + xfer->transferred += xfer->last_packet_size; + xfer->data1 ^= 1; + + if (xfer->total_len == xfer->transferred || xfer->last_packet_size < xfer->max_packet_size) + { + dcd_event_xfer_complete(0, 0, xfer->transferred, XFER_RESULT_SUCCESS, true); + } + else + { + // Re-enable reception + REG_SET_BIT(USB_RXC0_REG, USB_RX_EN); + } + xfer->last_packet_size = 0; + } + } + } +} + +static void handle_ep0_tx(void) +{ + uint32_t txs0; + xfer_ctl_t *xfer = XFER_CTL_BASE(0, TUSB_DIR_IN); + EPx_REGS *regs = xfer->regs; + + txs0 = regs->USB_TXS0_REG; + + if (GET_BIT(txs0, USB_USB_TXS0_REG_USB_TX_DONE)) + { + // ACK received + if (GET_BIT(txs0, USB_USB_TXS0_REG_USB_ACK_STAT)) + { + xfer->transferred += xfer->last_packet_size; + xfer->last_packet_size = 0; + xfer->data1 ^= 1; + REG_SET_VAL(USB_TXC0_REG, USB_TOGGLE_TX0, xfer->data1); + if (xfer->transferred == xfer->total_len) + { + dcd_event_xfer_complete(0, 0 | TUSB_DIR_IN_MASK, xfer->total_len, XFER_RESULT_SUCCESS, true); + return; + } + } + else + { + // Start from the beginning + xfer->last_packet_size = 0; + } + fill_tx_fifo(xfer); + } +} + +static void handle_epx_rx_ev(uint8_t ep) +{ + uint32_t rxs; + int fifo_bytes; + xfer_ctl_t *xfer = XFER_CTL_BASE(ep, TUSB_DIR_OUT); + + EPx_REGS *regs = xfer->regs; + + do + { + rxs = regs->rxs; + + if (GET_BIT(rxs, USB_USB_RXS1_REG_USB_RX_ERR)) + { + regs->rxc |= USB_USB_RXC1_REG_USB_FLUSH_Msk; + xfer->last_packet_size = 0; + if (_dcd.dma_ep[TUSB_DIR_OUT] == ep) + { + // Stop DMA + RX_DMA_REGS->DMAx_CTRL_REG &= ~DMA_DMA0_CTRL_REG_DMA_ON_Msk; + // Restart DMA since packet was dropped, all parameters should still work. + RX_DMA_REGS->DMAx_CTRL_REG |= DMA_DMA0_CTRL_REG_DMA_ON_Msk; + } + break; + } + else + { + if (_dcd.dma_ep[TUSB_DIR_OUT] == ep) + { + // Disable DMA and update last_packet_size with what DMA reported. + RX_DMA_REGS->DMAx_CTRL_REG &= ~DMA_DMA0_CTRL_REG_DMA_ON_Msk; + xfer->last_packet_size = RX_DMA_REGS->DMAx_IDX_REG; + // When DMA did not finished (packet was smaller then MPS), DMAx_IDX_REG holds exact number of bytes transmitted. + // When DMA finished value in DMAx_IDX_REG is one less then actual number of transmitted bytes. + if (xfer->last_packet_size == RX_DMA_REGS->DMAx_LEN_REG) xfer->last_packet_size++; + // Release DMA to use by other endpoints. + _dcd.dma_ep[TUSB_DIR_OUT] = 0; + } + fifo_bytes = GET_BIT(rxs, USB_USB_RXS1_REG_USB_RXCOUNT); + // FIFO maybe empty if DMA read it before or it's final iteration and function already read all that was to read. + if (fifo_bytes > 0) + { + read_rx_fifo(xfer, fifo_bytes); + } + if (GET_BIT(rxs, USB_USB_RXS1_REG_USB_RX_LAST)) + { + if (!xfer->iso && GET_BIT(rxs, USB_USB_RXS1_REG_USB_TOGGLE_RX) != xfer->data1) + { + // Toggle bit does not match discard packet + regs->rxc |= USB_USB_RXC1_REG_USB_FLUSH_Msk; + } + else + { + xfer->data1 ^= 1; + xfer->transferred += xfer->last_packet_size; + if (xfer->total_len == xfer->transferred || xfer->last_packet_size < xfer->max_packet_size || xfer->iso) + { + dcd_event_xfer_complete(0, xfer->ep_addr, xfer->transferred, XFER_RESULT_SUCCESS, true); + } + else + { + // Re-enable reception + start_rx_packet(xfer); + } + } + xfer->last_packet_size = 0; + } + } + } while (fifo_bytes > TU_DA1469X_FIFO_READ_THRESHOLD); +} + +static void handle_rx_ev(void) +{ + if (USB->USB_RXEV_REG & 1) + handle_epx_rx_ev(1); + if (USB->USB_RXEV_REG & 2) + handle_epx_rx_ev(2); + if (USB->USB_RXEV_REG & 4) + handle_epx_rx_ev(3); +} + +static void handle_epx_tx_ev(xfer_ctl_t *xfer) +{ + uint8_t const epnum = tu_edpt_number(xfer->ep_addr); + uint32_t txs; + EPx_REGS *regs = xfer->regs; + + txs = regs->txs; + + if (GET_BIT(txs, USB_USB_TXS1_REG_USB_TX_DONE)) + { + if (_dcd.dma_ep[TUSB_DIR_IN] == epnum) + { + // Disable DMA and update last_packet_size with what DMA reported. + TX_DMA_REGS->DMAx_CTRL_REG &= ~DMA_DMA1_CTRL_REG_DMA_ON_Msk; + xfer->last_packet_size = TX_DMA_REGS->DMAx_IDX_REG + 1; + // Release DMA to used by other endpoints. + _dcd.dma_ep[TUSB_DIR_IN] = 0; + } + if (GET_BIT(txs, USB_USB_TXS1_REG_USB_ACK_STAT)) + { + // ACK received, update transfer state and DATA0/1 bit + xfer->transferred += xfer->last_packet_size; + xfer->last_packet_size = 0; + xfer->data1 ^= 1; + + if (xfer->transferred == xfer->total_len) + { + dcd_event_xfer_complete(0, xfer->ep_addr, xfer->total_len, XFER_RESULT_SUCCESS, true); + return; + } + } + } + if (txs & USB_USB_TXS1_REG_USB_TX_URUN_Msk) + { + TU_LOG1("EP %d FIFO underrun\n", epnum); + } + // Start next or repeated packet. + start_tx_packet(xfer); +} + +static void handle_tx_ev(void) +{ + if (USB->USB_TXEV_REG & 1) + handle_epx_tx_ev(XFER_CTL_BASE(1, TUSB_DIR_IN)); + if (USB->USB_TXEV_REG & 2) + handle_epx_tx_ev(XFER_CTL_BASE(2, TUSB_DIR_IN)); + if (USB->USB_TXEV_REG & 4) + handle_epx_tx_ev(XFER_CTL_BASE(3, TUSB_DIR_IN)); +} + +static void handle_bus_reset(void) +{ + USB->USB_NFSR_REG = 0; + USB->USB_FAR_REG = 0x80; + USB->USB_ALTMSK_REG = 0; + USB->USB_NFSR_REG = NFSR_NODE_RESET; + USB->USB_TXMSK_REG = 0; + USB->USB_RXMSK_REG = 0; + (void)USB->USB_ALTEV_REG; + _dcd.in_reset = true; + + dcd_event_bus_reset(0, TUSB_SPEED_FULL, true); + USB->USB_DMA_CTRL_REG = 0; + + USB->USB_MAMSK_REG = USB_USB_MAMSK_REG_USB_M_INTR_Msk | +#if USE_SOF + USB_USB_MAMSK_REG_USB_M_FRAME_Msk | +#endif + USB_USB_MAMSK_REG_USB_M_WARN_Msk | + USB_USB_MAMSK_REG_USB_M_ALT_Msk; + USB->USB_NFSR_REG = NFSR_NODE_OPERATIONAL; + USB->USB_ALTMSK_REG = USB_USB_ALTMSK_REG_USB_M_SD3_Msk | + USB_USB_ALTMSK_REG_USB_M_RESUME_Msk; + // There is no information about end of reset state + // USB_FRAME event will be used to enable reset detection again + REG_SET_BIT(USB_MAEV_REG, USB_FRAME); + dcd_edpt_open (0, &ep0OUT_desc); + dcd_edpt_open (0, &ep0IN_desc); +} + +static void handle_alt_ev(void) +{ + uint32_t alt_ev = USB->USB_ALTEV_REG; + + if (GET_BIT(alt_ev, USB_USB_ALTEV_REG_USB_RESET)) + { + handle_bus_reset(); + } + else + { + if (GET_BIT(alt_ev, USB_USB_ALTEV_REG_USB_RESUME)) + { + USB->USB_NFSR_REG = NFSR_NODE_OPERATIONAL; + USB->USB_ALTMSK_REG &= ~USB_USB_ALTMSK_REG_USB_M_RESUME_Msk; + USB->USB_ALTMSK_REG |= USB_USB_ALTMSK_REG_USB_M_SD3_Msk; + dcd_event_bus_signal(0, DCD_EVENT_RESUME, true); + } + if (GET_BIT(alt_ev, USB_USB_ALTEV_REG_USB_SD3)) + { + USB->USB_NFSR_REG = NFSR_NODE_SUSPEND; + USB->USB_ALTMSK_REG |= USB_USB_ALTMSK_REG_USB_M_RESUME_Msk; + USB->USB_ALTMSK_REG &= ~USB_USB_ALTMSK_REG_USB_M_SD3_Msk | USB_USB_ALTMSK_REG_USB_M_SD5_Msk; + dcd_event_bus_signal(0, DCD_EVENT_SUSPEND, true); + } + } +} + +static void handle_epx_tx_warn_ev(uint8_t ep) +{ + fill_tx_fifo(XFER_CTL_BASE(ep, TUSB_DIR_IN)); +} + +static void handle_fifo_warning(void) +{ + uint32_t fifo_warning = USB->USB_FWEV_REG; + + if (fifo_warning & 0x01) + handle_epx_tx_warn_ev(1); + if (fifo_warning & 0x02) + handle_epx_tx_warn_ev(2); + if (fifo_warning & 0x04) + handle_epx_tx_warn_ev(3); + if (fifo_warning & 0x10) + handle_epx_rx_ev(1); + if (fifo_warning & 0x20) + handle_epx_rx_ev(2); + if (fifo_warning & 0x40) + handle_epx_rx_ev(3); +} + +static void handle_ep0_nak(void) +{ + uint32_t ep0_nak = USB->USB_EP0_NAK_REG; + + if (REG_GET_BIT(USB_EPC0_REG, USB_STALL)) + { + if (GET_BIT(ep0_nak, USB_USB_EP0_NAK_REG_USB_EP0_INNAK)) + { + // EP0 is stalled and NAK was sent, it means that RX is enabled + // Disable RX for now. + REG_CLR_BIT(USB_RXC0_REG, USB_RX_EN); + REG_SET_BIT(USB_TXC0_REG, USB_TX_EN); + } + if (GET_BIT(ep0_nak, USB_USB_EP0_NAK_REG_USB_EP0_OUTNAK)) + { + REG_SET_BIT(USB_RXC0_REG, USB_RX_EN); + } + } + else + { + REG_CLR_BIT(USB_MAMSK_REG, USB_M_EP0_NAK); + } +} + +/*------------------------------------------------------------------*/ +/* Controller API + *------------------------------------------------------------------*/ +void dcd_init(uint8_t rhport) +{ + USB->USB_MCTRL_REG = USB_USB_MCTRL_REG_USBEN_Msk; + USB->USB_NFSR_REG = 0; + USB->USB_FAR_REG = 0x80; + USB->USB_NFSR_REG = NFSR_NODE_RESET; + USB->USB_TXMSK_REG = 0; + USB->USB_RXMSK_REG = 0; + + USB->USB_MAMSK_REG = USB_USB_MAMSK_REG_USB_M_INTR_Msk | + USB_USB_MAMSK_REG_USB_M_ALT_Msk | + USB_USB_MAMSK_REG_USB_M_WARN_Msk; + USB->USB_ALTMSK_REG = USB_USB_ALTMSK_REG_USB_M_RESET_Msk; + + dcd_connect(rhport); +} + +void dcd_int_enable(uint8_t rhport) +{ + (void)rhport; + + NVIC_EnableIRQ(USB_IRQn); +} + +void dcd_int_disable(uint8_t rhport) +{ + (void)rhport; + + NVIC_DisableIRQ(USB_IRQn); +} + +void dcd_set_address(uint8_t rhport, uint8_t dev_addr) +{ + (void)rhport; + + // Set default address for one ZLP + USB->USB_EPC0_REG = USB_USB_EPC0_REG_USB_DEF_Msk; + USB->USB_FAR_REG = (dev_addr & USB_USB_FAR_REG_USB_AD_Msk) | USB_USB_FAR_REG_USB_AD_EN_Msk; + dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); +} + +void dcd_remote_wakeup(uint8_t rhport) +{ + (void)rhport; +} + +void dcd_connect(uint8_t rhport) +{ + (void)rhport; + + REG_SET_BIT(USB_MCTRL_REG, USB_NAT); + + // Select chosen DMA to be triggered by USB. + DMA->DMA_REQ_MUX_REG = (DMA->DMA_REQ_MUX_REG & ~DA146XX_DMA_USB_MUX_MASK) | DA146XX_DMA_USB_MUX; +} + +void dcd_disconnect(uint8_t rhport) +{ + (void)rhport; + + REG_CLR_BIT(USB_MCTRL_REG, USB_NAT); +} + + +/*------------------------------------------------------------------*/ +/* DCD Endpoint port + *------------------------------------------------------------------*/ + +bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt) +{ + (void)rhport; + + uint8_t const epnum = tu_edpt_number(desc_edpt->bEndpointAddress); + uint8_t const dir = tu_edpt_dir(desc_edpt->bEndpointAddress); + xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir); + uint8_t iso_mask = 0; + + TU_ASSERT(epnum < EP_MAX); + + xfer->max_packet_size = desc_edpt->wMaxPacketSize.size; + xfer->ep_addr = desc_edpt->bEndpointAddress; + xfer->data1 = 0; + xfer->iso = 0; + + if (epnum != 0 && desc_edpt->bmAttributes.xfer == 1) + { + iso_mask = USB_USB_EPC1_REG_USB_ISO_Msk; + xfer->iso = 1; + } + + if (epnum == 0) + { + USB->USB_MAMSK_REG |= USB_USB_MAMSK_REG_USB_M_EP0_RX_Msk | + USB_USB_MAMSK_REG_USB_M_EP0_TX_Msk; + } + else + { + if (dir == TUSB_DIR_OUT) + { + xfer->regs->epc_out = epnum | USB_USB_EPC1_REG_USB_EP_EN_Msk | iso_mask; + USB->USB_RXMSK_REG |= 0x101 << (epnum - 1); + REG_SET_BIT(USB_MAMSK_REG, USB_M_RX_EV); + } + else + { + xfer->regs->epc_in = epnum | USB_USB_EPC1_REG_USB_EP_EN_Msk | iso_mask; + USB->USB_TXMSK_REG |= 0x101 << (epnum - 1); + REG_SET_BIT(USB_MAMSK_REG, USB_M_TX_EV); + } + } + + return true; +} + +void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) +{ + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir); + + (void)rhport; + + TU_ASSERT(epnum < EP_MAX,); + + if (epnum == 0) + { + USB->USB_MAMSK_REG &= ~(USB_USB_MAMSK_REG_USB_M_EP0_RX_Msk | + USB_USB_MAMSK_REG_USB_M_EP0_TX_Msk); + } + else + { + if (dir == TUSB_DIR_OUT) + { + xfer->regs->rxc = USB_USB_RXC1_REG_USB_FLUSH_Msk; + xfer->regs->epc_out = 0; + USB->USB_RXMSK_REG &= ~(0x101 << (epnum - 1)); + // Release DMA if needed + if (_dcd.dma_ep[TUSB_DIR_OUT] == epnum) + { + RX_DMA_REGS->DMAx_CTRL_REG &= ~DMA_DMA0_CTRL_REG_DMA_ON_Msk; + _dcd.dma_ep[TUSB_DIR_OUT] = 0; + } + } + else + { + xfer->regs->txc = USB_USB_TXC1_REG_USB_FLUSH_Msk; + xfer->regs->epc_in = 0; + USB->USB_TXMSK_REG &= ~(0x101 << (epnum - 1)); + // Release DMA if needed + if (_dcd.dma_ep[TUSB_DIR_IN] == epnum) + { + TX_DMA_REGS->DMAx_CTRL_REG &= ~DMA_DMA1_CTRL_REG_DMA_ON_Msk; + _dcd.dma_ep[TUSB_DIR_IN] = 0; + } + } + } +} + +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) +{ + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir); + + (void)rhport; + + xfer->buffer = buffer; + xfer->total_len = total_bytes; + xfer->last_packet_size = 0; + xfer->transferred = 0; + + if (dir == TUSB_DIR_OUT) + { + start_rx_packet(xfer); + } + else // IN + { + start_tx_packet(xfer); + } + + return true; +} + +void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) +{ + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + + (void)rhport; + + xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir); + xfer->stall = 1; + + if (epnum == 0) + { + // EP0 has just one registers to control stall for IN and OUT + REG_SET_BIT(USB_EPC0_REG, USB_STALL); + if (dir == TUSB_DIR_OUT) + { + xfer->regs->USB_RXC0_REG = USB_USB_RXC0_REG_USB_RX_EN_Msk; + } + else + { + if (xfer->regs->USB_RXC0_REG & USB_USB_RXC0_REG_USB_RX_EN_Msk) + { + // If RX is also enabled TX will not be stalled since RX has + // higher priority. Enable NAK interrupt to handle stall. + REG_SET_BIT(USB_MAMSK_REG, USB_M_EP0_NAK); + } + else + { + xfer->regs->USB_TXC0_REG |= USB_USB_TXC0_REG_USB_TX_EN_Msk; + } + } + } + else + { + if (dir == TUSB_DIR_OUT) + { + xfer->regs->epc_out |= USB_USB_EPC1_REG_USB_STALL_Msk; + xfer->regs->rxc |= USB_USB_RXC1_REG_USB_RX_EN_Msk; + } + else + { + xfer->regs->epc_in |= USB_USB_EPC1_REG_USB_STALL_Msk; + xfer->regs->txc |= USB_USB_TXC1_REG_USB_TX_EN_Msk | USB_USB_TXC1_REG_USB_LAST_Msk; + } + } +} + +void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) +{ + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + + (void)rhport; + + xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir); + + // Clear stall is called in response to Clear Feature ENDPOINT_HALT, reset toggle + xfer->data1 = 0; + xfer->stall = 0; + + if (dir == TUSB_DIR_OUT) + { + xfer->regs->epc_out &= ~USB_USB_EPC1_REG_USB_STALL_Msk; + } + else + { + xfer->regs->epc_in &= ~USB_USB_EPC1_REG_USB_STALL_Msk; + } + if (epnum == 0) + { + REG_CLR_BIT(USB_MAMSK_REG, USB_M_EP0_NAK); + } +} + +/*------------------------------------------------------------------*/ +/* Interrupt Handler + *------------------------------------------------------------------*/ + +void dcd_int_handler(uint8_t rhport) +{ + uint32_t int_status = USB->USB_MAEV_REG; + + (void)rhport; + + if (GET_BIT(int_status, USB_USB_MAEV_REG_USB_WARN)) + { + handle_fifo_warning(); + } + + if (GET_BIT(int_status, USB_USB_MAEV_REG_USB_CH_EV)) + { + // TODO: for now just clear interrupt + (void)USB->USB_CHARGER_STAT_REG; + } + + if (GET_BIT(int_status, USB_USB_MAEV_REG_USB_EP0_NAK)) + { + handle_ep0_nak(); + } + + if (GET_BIT(int_status, USB_USB_MAEV_REG_USB_EP0_RX)) + { + handle_ep0_rx(); + } + + if (GET_BIT(int_status, USB_USB_MAEV_REG_USB_EP0_TX)) + { + handle_ep0_tx(); + } + + if (GET_BIT(int_status, USB_USB_MAEV_REG_USB_RX_EV)) + { + handle_rx_ev(); + } + + if (GET_BIT(int_status, USB_USB_MAEV_REG_USB_NAK)) + { + (void)USB->USB_NAKEV_REG; + } + + if (GET_BIT(int_status, USB_USB_MAEV_REG_USB_FRAME)) + { + if (_dcd.in_reset) + { + // Enable reset detection + _dcd.in_reset = false; + (void)USB->USB_ALTEV_REG; + } +#if USE_SOF + dcd_event_bus_signal(0, DCD_EVENT_SOF, true); +#else + // SOF was used to re-enable reset detection + // No need to keep it enabled + USB->USB_MAMSK_REG &= ~USB_USB_MAMSK_REG_USB_M_FRAME_Msk; +#endif + } + + if (GET_BIT(int_status, USB_USB_MAEV_REG_USB_TX_EV)) + { + handle_tx_ev(); + } + + if (GET_BIT(int_status, USB_USB_MAEV_REG_USB_ALT)) + { + handle_alt_ev(); + } +} + +#endif |