diff options
Diffstat (limited to 'tinyusb/src/portable/nxp/lpc17_40/dcd_lpc17_40.c')
| -rwxr-xr-x | tinyusb/src/portable/nxp/lpc17_40/dcd_lpc17_40.c | 582 |
1 files changed, 582 insertions, 0 deletions
diff --git a/tinyusb/src/portable/nxp/lpc17_40/dcd_lpc17_40.c b/tinyusb/src/portable/nxp/lpc17_40/dcd_lpc17_40.c new file mode 100755 index 00000000..519d0915 --- /dev/null +++ b/tinyusb/src/portable/nxp/lpc17_40/dcd_lpc17_40.c @@ -0,0 +1,582 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb_option.h" + +#if TUSB_OPT_DEVICE_ENABLED && \ + (CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX) + +#include "device/dcd.h" +#include "dcd_lpc17_40.h" +#include "chip.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF +//--------------------------------------------------------------------+ +#define DCD_ENDPOINT_MAX 32 + +typedef struct TU_ATTR_ALIGNED(4) +{ + //------------- Word 0 -------------// + uint32_t next; + + //------------- Word 1 -------------// + uint16_t atle_mode : 2; // 00: normal, 01: ATLE (auto length extraction) + uint16_t next_valid : 1; + uint16_t : 1; ///< reserved + uint16_t isochronous : 1; // is an iso endpoint + uint16_t max_packet_size : 11; + + volatile uint16_t buflen; // bytes for non-iso, number of packets for iso endpoint + + //------------- Word 2 -------------// + volatile uint32_t buffer; + + //------------- Word 3 -------------// + volatile uint16_t retired : 1; // initialized to zero + volatile uint16_t status : 4; + volatile uint16_t iso_last_packet_valid : 1; + volatile uint16_t atle_lsb_extracted : 1; // used in ATLE mode + volatile uint16_t atle_msb_extracted : 1; // used in ATLE mode + volatile uint16_t atle_mess_len_position : 6; // used in ATLE mode + uint16_t : 2; + + volatile uint16_t present_count; // For non-iso : The number of bytes transferred by the DMA engine + // For iso : number of packets + + //------------- Word 4 -------------// + // uint32_t iso_packet_size_addr; // iso only, can be omitted for non-iso +}dma_desc_t; + +TU_VERIFY_STATIC( sizeof(dma_desc_t) == 16, "size is not correct"); // TODO not support ISO for now + +typedef struct +{ + // must be 128 byte aligned + volatile dma_desc_t* udca[DCD_ENDPOINT_MAX]; + + // TODO DMA does not support control transfer (0-1 are not used, offset to reduce memory) + dma_desc_t dd[DCD_ENDPOINT_MAX]; + + struct + { + uint8_t* out_buffer; + uint8_t out_bytes; + volatile bool out_received; // indicate if data is already received in endpoint + + uint8_t in_bytes; + } control; + +} dcd_data_t; + +CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(128) static dcd_data_t _dcd; + + +//--------------------------------------------------------------------+ +// SIE Command +//--------------------------------------------------------------------+ +static void sie_cmd_code (sie_cmdphase_t phase, uint8_t code_data) +{ + LPC_USB->DevIntClr = (DEV_INT_COMMAND_CODE_EMPTY_MASK | DEV_INT_COMMAND_DATA_FULL_MASK); + LPC_USB->CmdCode = (phase << 8) | (code_data << 16); + + uint32_t const wait_flag = (phase == SIE_CMDPHASE_READ) ? DEV_INT_COMMAND_DATA_FULL_MASK : DEV_INT_COMMAND_CODE_EMPTY_MASK; + while ((LPC_USB->DevIntSt & wait_flag) == 0) {} + + LPC_USB->DevIntClr = wait_flag; +} + +static void sie_write (uint8_t cmd_code, uint8_t data_len, uint8_t data) +{ + sie_cmd_code(SIE_CMDPHASE_COMMAND, cmd_code); + + if (data_len) + { + sie_cmd_code(SIE_CMDPHASE_WRITE, data); + } +} + +static uint8_t sie_read (uint8_t cmd_code) +{ + sie_cmd_code(SIE_CMDPHASE_COMMAND , cmd_code); + sie_cmd_code(SIE_CMDPHASE_READ , cmd_code); + return (uint8_t) LPC_USB->CmdData; +} + +//--------------------------------------------------------------------+ +// PIPE HELPER +//--------------------------------------------------------------------+ +static inline uint8_t ep_addr2idx(uint8_t ep_addr) +{ + return 2*(ep_addr & 0x0F) + ((ep_addr & TUSB_DIR_IN_MASK) ? 1 : 0); +} + +static void set_ep_size(uint8_t ep_id, uint16_t max_packet_size) +{ + // follows example in 11.10.4.2 + LPC_USB->ReEp |= TU_BIT(ep_id); + LPC_USB->EpInd = ep_id; // select index before setting packet size + LPC_USB->MaxPSize = max_packet_size; + + while ((LPC_USB->DevIntSt & DEV_INT_ENDPOINT_REALIZED_MASK) == 0) {} + LPC_USB->DevIntClr = DEV_INT_ENDPOINT_REALIZED_MASK; +} + + +//--------------------------------------------------------------------+ +// CONTROLLER API +//--------------------------------------------------------------------+ +static void bus_reset(void) +{ + // step 7 : slave mode set up + LPC_USB->EpIntClr = 0xFFFFFFFF; // clear all pending interrupt + LPC_USB->DevIntClr = 0xFFFFFFFF; // clear all pending interrupt + LPC_USB->EpIntEn = 0x03UL; // control endpoint cannot use DMA, non-control all use DMA + LPC_USB->EpIntPri = 0x03UL; // fast for control endpoint + + // step 8 : DMA set up + LPC_USB->EpDMADis = 0xFFFFFFFF; // firstly disable all dma + LPC_USB->DMARClr = 0xFFFFFFFF; // clear all pending interrupt + LPC_USB->EoTIntClr = 0xFFFFFFFF; + LPC_USB->NDDRIntClr = 0xFFFFFFFF; + LPC_USB->SysErrIntClr = 0xFFFFFFFF; + + tu_memclr(&_dcd, sizeof(dcd_data_t)); +} + +void dcd_init(uint8_t rhport) +{ + (void) rhport; + + //------------- user manual 11.13 usb device controller initialization -------------// + // step 6 : set up control endpoint + set_ep_size(0, CFG_TUD_ENDPOINT0_SIZE); + set_ep_size(1, CFG_TUD_ENDPOINT0_SIZE); + + bus_reset(); + + LPC_USB->DevIntEn = (DEV_INT_DEVICE_STATUS_MASK | DEV_INT_ENDPOINT_FAST_MASK | DEV_INT_ENDPOINT_SLOW_MASK | DEV_INT_ERROR_MASK); + LPC_USB->UDCAH = (uint32_t) _dcd.udca; + LPC_USB->DMAIntEn = (DMA_INT_END_OF_XFER_MASK /*| DMA_INT_NEW_DD_REQUEST_MASK*/ | DMA_INT_ERROR_MASK); + + dcd_connect(rhport); + + // Clear pending IRQ + NVIC_ClearPendingIRQ(USB_IRQn); +} + +void dcd_int_enable(uint8_t rhport) +{ + (void) rhport; + NVIC_EnableIRQ(USB_IRQn); +} + +void dcd_int_disable(uint8_t rhport) +{ + (void) rhport; + NVIC_DisableIRQ(USB_IRQn); +} + +void dcd_set_address(uint8_t rhport, uint8_t dev_addr) +{ + // Response with status first before changing device address + dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); + + sie_write(SIE_CMDCODE_SET_ADDRESS, 1, 0x80 | dev_addr); // 7th bit is : device_enable + + // Also Set Configure Device to enable non-control endpoint response + sie_write(SIE_CMDCODE_CONFIGURE_DEVICE, 1, 1); +} + +void dcd_remote_wakeup(uint8_t rhport) +{ + (void) rhport; +} + +void dcd_connect(uint8_t rhport) +{ + (void) rhport; + sie_write(SIE_CMDCODE_DEVICE_STATUS, 1, SIE_DEV_STATUS_CONNECT_STATUS_MASK); +} + +void dcd_disconnect(uint8_t rhport) +{ + (void) rhport; + sie_write(SIE_CMDCODE_DEVICE_STATUS, 1, 0); +} + +//--------------------------------------------------------------------+ +// CONTROL HELPER +//--------------------------------------------------------------------+ +static inline uint8_t byte2dword(uint8_t bytes) +{ + return (bytes + 3) / 4; // length in dwords +} + +static void control_ep_write(void const * buffer, uint8_t len) +{ + uint32_t const * buf32 = (uint32_t const *) buffer; + + LPC_USB->Ctrl = USBCTRL_WRITE_ENABLE_MASK; // logical endpoint = 0 + LPC_USB->TxPLen = (uint32_t) len; + + for (uint8_t count = 0; count < byte2dword(len); count++) + { + LPC_USB->TxData = *buf32; // NOTE: cortex M3 have no problem with alignment + buf32++; + } + + LPC_USB->Ctrl = 0; + + // select control IN & validate the endpoint + sie_write(SIE_CMDCODE_ENDPOINT_SELECT+1, 0, 0); + sie_write(SIE_CMDCODE_BUFFER_VALIDATE , 0, 0); +} + +static uint8_t control_ep_read(void * buffer, uint8_t len) +{ + LPC_USB->Ctrl = USBCTRL_READ_ENABLE_MASK; // logical endpoint = 0 + while ((LPC_USB->RxPLen & USBRXPLEN_PACKET_READY_MASK) == 0) {} // TODO blocking, should have timeout + + len = tu_min8(len, (uint8_t) (LPC_USB->RxPLen & USBRXPLEN_PACKET_LENGTH_MASK) ); + uint32_t *buf32 = (uint32_t*) buffer; + + for (uint8_t count=0; count < byte2dword(len); count++) + { + *buf32 = LPC_USB->RxData; + buf32++; + } + + LPC_USB->Ctrl = 0; + + // select control OUT & clear the endpoint + sie_write(SIE_CMDCODE_ENDPOINT_SELECT+0, 0, 0); + sie_write(SIE_CMDCODE_BUFFER_CLEAR , 0, 0); + + return len; +} + +//--------------------------------------------------------------------+ +// DCD Endpoint Port +//--------------------------------------------------------------------+ + +bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) +{ + (void) rhport; + + uint8_t const epnum = tu_edpt_number(p_endpoint_desc->bEndpointAddress); + uint8_t const ep_id = ep_addr2idx(p_endpoint_desc->bEndpointAddress); + + // Endpoint type is fixed to endpoint number + // 1: interrupt, 2: Bulk, 3: Iso and so on + switch ( p_endpoint_desc->bmAttributes.xfer ) + { + case TUSB_XFER_INTERRUPT: + TU_ASSERT((epnum % 3) == 1); + break; + + case TUSB_XFER_BULK: + TU_ASSERT((epnum % 3) == 2 || (epnum == 15)); + break; + + case TUSB_XFER_ISOCHRONOUS: + TU_ASSERT((epnum % 3) == 0 && (epnum != 0) && (epnum != 15)); + break; + + default: + break; + } + + //------------- Realize Endpoint with Max Packet Size -------------// + set_ep_size(ep_id, p_endpoint_desc->wMaxPacketSize.size); + + //------------- first DD prepare -------------// + dma_desc_t* const dd = &_dcd.dd[ep_id]; + tu_memclr(dd, sizeof(dma_desc_t)); + + dd->isochronous = (p_endpoint_desc->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) ? 1 : 0; + dd->max_packet_size = p_endpoint_desc->wMaxPacketSize.size; + dd->retired = 1; // invalid at first + + sie_write(SIE_CMDCODE_ENDPOINT_SET_STATUS + ep_id, 1, 0); // clear all endpoint status + + return true; +} + +void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) +{ + (void) rhport; + + if ( tu_edpt_number(ep_addr) == 0 ) + { + sie_write(SIE_CMDCODE_ENDPOINT_SET_STATUS+0, 1, SIE_SET_ENDPOINT_STALLED_MASK | SIE_SET_ENDPOINT_CONDITION_STALLED_MASK); + }else + { + uint8_t ep_id = ep_addr2idx( ep_addr ); + sie_write(SIE_CMDCODE_ENDPOINT_SET_STATUS+ep_id, 1, SIE_SET_ENDPOINT_STALLED_MASK); + } +} + +void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) +{ + (void) rhport; + uint8_t ep_id = ep_addr2idx(ep_addr); + + sie_write(SIE_CMDCODE_ENDPOINT_SET_STATUS+ep_id, 1, 0); +} + +static bool control_xact(uint8_t rhport, uint8_t dir, uint8_t * buffer, uint8_t len) +{ + (void) rhport; + + if ( dir ) + { + _dcd.control.in_bytes = len; + control_ep_write(buffer, len); + }else + { + if ( _dcd.control.out_received ) + { + // Already received the DATA OUT packet + _dcd.control.out_received = false; + _dcd.control.out_buffer = NULL; + _dcd.control.out_bytes = 0; + + uint8_t received = control_ep_read(buffer, len); + dcd_event_xfer_complete(0, 0, received, XFER_RESULT_SUCCESS, true); + }else + { + _dcd.control.out_buffer = buffer; + _dcd.control.out_bytes = len; + } + } + + return true; +} + +bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) +{ + // Control transfer is not DMA support, and must be done in slave mode + if ( tu_edpt_number(ep_addr) == 0 ) + { + return control_xact(rhport, tu_edpt_dir(ep_addr), buffer, (uint8_t) total_bytes); + } + else + { + uint8_t ep_id = ep_addr2idx(ep_addr); + dma_desc_t* dd = &_dcd.dd[ep_id]; + + // Prepare DMA descriptor + // Isochronous & max packet size must be preserved, Other fields of dd should be clear + uint16_t const ep_size = dd->max_packet_size; + uint8_t is_iso = dd->isochronous; + + tu_memclr(dd, sizeof(dma_desc_t)); + dd->isochronous = is_iso; + dd->max_packet_size = ep_size; + dd->buffer = (uint32_t) buffer; + dd->buflen = total_bytes; + + _dcd.udca[ep_id] = dd; + + if ( ep_id % 2 ) + { + // Clear EP interrupt before Enable DMA + LPC_USB->EpIntEn &= ~TU_BIT(ep_id); + LPC_USB->EpDMAEn = TU_BIT(ep_id); + + // endpoint IN need to actively raise DMA request + LPC_USB->DMARSet = TU_BIT(ep_id); + }else + { + // Enable DMA + LPC_USB->EpDMAEn = TU_BIT(ep_id); + } + + return true; + } +} + +//--------------------------------------------------------------------+ +// ISR +//--------------------------------------------------------------------+ + +// handle control xfer (slave mode) +static void control_xfer_isr(uint8_t rhport, uint32_t ep_int_status) +{ + // Control out complete + if ( ep_int_status & TU_BIT(0) ) + { + bool is_setup = sie_read(SIE_CMDCODE_ENDPOINT_SELECT+0) & SIE_SELECT_ENDPOINT_SETUP_RECEIVED_MASK; + + LPC_USB->EpIntClr = TU_BIT(0); + + if (is_setup) + { + uint8_t setup_packet[8]; + control_ep_read(setup_packet, 8); // TODO read before clear setup above + + dcd_event_setup_received(rhport, setup_packet, true); + } + else if ( _dcd.control.out_buffer ) + { + // software queued transfer previously + uint8_t received = control_ep_read(_dcd.control.out_buffer, _dcd.control.out_bytes); + + _dcd.control.out_buffer = NULL; + _dcd.control.out_bytes = 0; + + dcd_event_xfer_complete(rhport, 0, received, XFER_RESULT_SUCCESS, true); + }else + { + // hardware auto ack packet -> mark as received + _dcd.control.out_received = true; + } + } + + // Control In complete + if ( ep_int_status & TU_BIT(1) ) + { + LPC_USB->EpIntClr = TU_BIT(1); + dcd_event_xfer_complete(rhport, TUSB_DIR_IN_MASK, _dcd.control.in_bytes, XFER_RESULT_SUCCESS, true); + } +} + +// handle bus event signal +static void bus_event_isr(uint8_t rhport) +{ + uint8_t const dev_status = sie_read(SIE_CMDCODE_DEVICE_STATUS); + if (dev_status & SIE_DEV_STATUS_RESET_MASK) + { + bus_reset(); + dcd_event_bus_reset(rhport, TUSB_SPEED_FULL, true); + } + + if (dev_status & SIE_DEV_STATUS_CONNECT_CHANGE_MASK) + { + // device is disconnected, require using VBUS (P1_30) + dcd_event_bus_signal(rhport, DCD_EVENT_UNPLUGGED, true); + } + + if (dev_status & SIE_DEV_STATUS_SUSPEND_CHANGE_MASK) + { + if (dev_status & SIE_DEV_STATUS_SUSPEND_MASK) + { + dcd_event_bus_signal(rhport, DCD_EVENT_SUSPEND, true); + } + else + { + dcd_event_bus_signal(rhport, DCD_EVENT_RESUME, true); + } + } +} + +// Helper to complete a DMA descriptor for non-control transfer +static void dd_complete_isr(uint8_t rhport, uint8_t ep_id) +{ + dma_desc_t* const dd = &_dcd.dd[ep_id]; + uint8_t result = (dd->status == DD_STATUS_NORMAL || dd->status == DD_STATUS_DATA_UNDERUN) ? XFER_RESULT_SUCCESS : XFER_RESULT_FAILED; + uint8_t const ep_addr = (ep_id / 2) | ((ep_id & 0x01) ? TUSB_DIR_IN_MASK : 0); + + dcd_event_xfer_complete(rhport, ep_addr, dd->present_count, result, true); +} + +// main USB IRQ handler +void dcd_int_handler(uint8_t rhport) +{ + uint32_t const dev_int_status = LPC_USB->DevIntSt & LPC_USB->DevIntEn; + LPC_USB->DevIntClr = dev_int_status;// Acknowledge handled interrupt + + // Bus event + if (dev_int_status & DEV_INT_DEVICE_STATUS_MASK) + { + bus_event_isr(rhport); + } + + // Endpoint interrupt + uint32_t const ep_int_status = LPC_USB->EpIntSt & LPC_USB->EpIntEn; + + // Control Endpoint are fast + if (dev_int_status & DEV_INT_ENDPOINT_FAST_MASK) + { + // Note clear USBEpIntClr will also clear the setup received bit --> clear after handle setup packet + // Only clear USBEpIntClr 1 endpoint each, and should wait for CDFULL bit set + control_xfer_isr(rhport, ep_int_status); + } + + // non-control IN are slow + if (dev_int_status & DEV_INT_ENDPOINT_SLOW_MASK) + { + for ( uint8_t ep_id = 3; ep_id < DCD_ENDPOINT_MAX; ep_id += 2 ) + { + if ( tu_bit_test(ep_int_status, ep_id) ) + { + LPC_USB->EpIntClr = TU_BIT(ep_id); + + // Clear Ep interrupt for next DMA + LPC_USB->EpIntEn &= ~TU_BIT(ep_id); + + dd_complete_isr(rhport, ep_id); + } + } + } + + // DMA transfer complete (RAM <-> EP) for Non-Control + // OUT: USB transfer is fully complete + // IN : UBS transfer is still on-going -> enable EpIntEn to know when it is complete + uint32_t const dma_int_status = LPC_USB->DMAIntSt & LPC_USB->DMAIntEn; + if (dma_int_status & DMA_INT_END_OF_XFER_MASK) + { + uint32_t const eot = LPC_USB->EoTIntSt; + LPC_USB->EoTIntClr = eot; // acknowledge interrupt source + + for ( uint8_t ep_id = 2; ep_id < DCD_ENDPOINT_MAX; ep_id++ ) + { + if ( tu_bit_test(eot, ep_id) ) + { + if ( ep_id & 0x01 ) + { + // IN enable EpInt for end of usb transfer + LPC_USB->EpIntEn |= TU_BIT(ep_id); + }else + { + // OUT + dd_complete_isr(rhport, ep_id); + } + } + } + } + + // Errors + if ( (dev_int_status & DEV_INT_ERROR_MASK) || (dma_int_status & DMA_INT_ERROR_MASK) ) + { + uint32_t error_status = sie_read(SIE_CMDCODE_READ_ERROR_STATUS); + (void) error_status; + TU_BREAKPOINT(); + } +} + +#endif |