2 files changed, 0 insertions, 117 deletions
diff --git a/tinyusb b/tinyusb
new file mode 160000
+Subproject f8288be03f28ad7b944e6925f49422dfa39202c
diff --git a/tinyusb/src/portable/nxp/transdimension/hcd_transdimension.c b/tinyusb/src/portable/nxp/transdimension/hcd_transdimension.c
deleted file mode 100755
index d216f072..00000000
--- a/tinyusb/src/portable/nxp/transdimension/hcd_transdimension.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#include "tusb_option.h"
-
-// NXP Trans-Dimension USB IP implement EHCI for host functionality
-
-#if TUSB_OPT_HOST_ENABLED && \
-    (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX)
-
-//--------------------------------------------------------------------+
-// INCLUDE
-//--------------------------------------------------------------------+
-#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
-  #include "fsl_device_registers.h"
-#else
-  // LPCOpen for 18xx & 43xx
-  #include "chip.h"
-#endif
-
-#include "common/tusb_common.h"
-#include "common_transdimension.h"
-#include "portable/ehci/ehci_api.h"
-
-//--------------------------------------------------------------------+
-// MACRO CONSTANT TYPEDEF
-//--------------------------------------------------------------------+
-
-// TODO can be merged with dcd_controller_t
-typedef struct
-{
-  uint32_t regs_base;     // registers base
-  const IRQn_Type irqnum; // IRQ number
-}hcd_controller_t;
-
-#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
-  static const hcd_controller_t _hcd_controller[] =
-  {
-    // RT1010 and RT1020 only has 1 USB controller
-    #if FSL_FEATURE_SOC_USBHS_COUNT == 1
-      { .regs_base = USB_BASE , .irqnum = USB_OTG1_IRQn }
-    #else
-      { .regs_base = USB1_BASE, .irqnum = USB_OTG1_IRQn },
-      { .regs_base = USB2_BASE, .irqnum = USB_OTG2_IRQn }
-    #endif
-  };
-
-#else
-  static const hcd_controller_t _hcd_controller[] =
-  {
-    { .regs_base = LPC_USB0_BASE, .irqnum = USB0_IRQn },
-    { .regs_base = LPC_USB1_BASE, .irqnum = USB1_IRQn }
-  };
-#endif
-
-//--------------------------------------------------------------------+
-// Controller API
-//--------------------------------------------------------------------+
-
-bool hcd_init(uint8_t rhport)
-{
-  hcd_registers_t* hcd_reg = (hcd_registers_t*) _hcd_controller[rhport].regs_base;
-
-  // Reset controller
-  hcd_reg->USBCMD |= USBCMD_RESET;
-  while( hcd_reg->USBCMD & USBCMD_RESET ) {}
-
-  // Set mode to device, must be set immediately after reset
-#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX
-  // LPC18XX/43XX need to set VBUS Power Select to HIGH
-  // RHPORT1 is fullspeed only (need external PHY for Highspeed)
-  hcd_reg->USBMODE = USBMODE_CM_HOST | USBMODE_VBUS_POWER_SELECT;
-  if (rhport == 1) hcd_reg->PORTSC1 |= PORTSC1_FORCE_FULL_SPEED;
-#else
-  hcd_reg->USBMODE = USBMODE_CM_HOST;
-#endif
-
-  // FIXME force full speed, still have issue with Highspeed enumeration
-  hcd_reg->PORTSC1 |= PORTSC1_FORCE_FULL_SPEED;
-
-  return ehci_init(rhport, (uint32_t) &hcd_reg->CAPLENGTH, (uint32_t) &hcd_reg->USBCMD);
-}
-
-void hcd_int_enable(uint8_t rhport)
-{
-  NVIC_EnableIRQ(_hcd_controller[rhport].irqnum);
-}
-
-void hcd_int_disable(uint8_t rhport)
-{
-  NVIC_DisableIRQ(_hcd_controller[rhport].irqnum);
-}
-
-#endif