1 files changed, 0 insertions, 131 deletions
diff --git a/tinyusb/src/portable/template/dcd_template.c b/tinyusb/src/portable/template/dcd_template.c
deleted file mode 100755
index 12b9144b..00000000
--- a/tinyusb/src/portable/template/dcd_template.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2018, hathach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#include "tusb_option.h"
-
-#if CFG_TUSB_MCU == OPT_MCU_NONE
-
-#include "device/dcd.h"
-
-//--------------------------------------------------------------------+
-// MACRO TYPEDEF CONSTANT ENUM DECLARATION
-//--------------------------------------------------------------------+
-
-
-/*------------------------------------------------------------------*/
-/* Device API
- *------------------------------------------------------------------*/
-
-// Initialize controller to device mode
-void dcd_init (uint8_t rhport)
-{
-  (void) rhport;
-}
-
-// Enable device interrupt
-void dcd_int_enable (uint8_t rhport)
-{
-  (void) rhport;
-}
-
-// Disable device interrupt
-void dcd_int_disable (uint8_t rhport)
-{
-  (void) rhport;
-}
-
-// Receive Set Address request, mcu port must also include status IN response
-void dcd_set_address (uint8_t rhport, uint8_t dev_addr)
-{
-  (void) rhport;
-  (void) dev_addr;
-}
-
-// Wake up host
-void dcd_remote_wakeup (uint8_t rhport)
-{
-  (void) rhport;
-}
-
-// Connect by enabling internal pull-up resistor on D+/D-
-void dcd_connect(uint8_t rhport)
-{
-  (void) rhport;
-}
-
-// Disconnect by disabling internal pull-up resistor on D+/D-
-void dcd_disconnect(uint8_t rhport)
-{
-  (void) rhport;
-}
-
-//--------------------------------------------------------------------+
-// Endpoint API
-//--------------------------------------------------------------------+
-
-// Configure endpoint's registers according to descriptor
-bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * ep_desc)
-{
-  (void) rhport;
-  (void) ep_desc;
-  return false;
-}
-
-// Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack
-bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes)
-{
-  (void) rhport;
-  (void) ep_addr;
-  (void) buffer;
-  (void) total_bytes;
-  return false;
-}
-
-// Submit a transfer where is managed by FIFO, When complete dcd_event_xfer_complete() is invoked to notify the stack - optional, however, must be listed in usbd.c
-bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes)
-{
-  (void) rhport;
-  (void) ep_addr;
-  (void) ff;
-  (void) total_bytes;
-  return false;
-}
-
-// Stall endpoint
-void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr)
-{
-  (void) rhport;
-  (void) ep_addr;
-}
-
-// clear stall, data toggle is also reset to DATA0
-void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr)
-{
-  (void) rhport;
-  (void) ep_addr;
-}
-
-#endif