diff options
Diffstat (limited to 'tinyusb/src/portable/valentyusb/eptri')
-rwxr-xr-x | tinyusb/src/portable/valentyusb/eptri/dcd_eptri.c | 643 | ||||
-rwxr-xr-x | tinyusb/src/portable/valentyusb/eptri/dcd_eptri.h | 39 |
2 files changed, 682 insertions, 0 deletions
diff --git a/tinyusb/src/portable/valentyusb/eptri/dcd_eptri.c b/tinyusb/src/portable/valentyusb/eptri/dcd_eptri.c new file mode 100755 index 00000000..b68f04fa --- /dev/null +++ b/tinyusb/src/portable/valentyusb/eptri/dcd_eptri.c @@ -0,0 +1,643 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef DEBUG +#define DEBUG 0 +#endif + +#ifndef LOG_USB +#define LOG_USB 0 +#endif + +#include "tusb_option.h" + +#if TUSB_OPT_DEVICE_ENABLED && (CFG_TUSB_MCU == OPT_MCU_VALENTYUSB_EPTRI) + +#include "device/dcd.h" +#include "dcd_eptri.h" +#include "csr.h" +#include "irq.h" +void fomu_error(uint32_t line); + +#if LOG_USB +struct usb_log { + uint8_t ep_num; + uint8_t size; + uint8_t data[66]; +}; +__attribute__((used)) +struct usb_log usb_log[128]; +__attribute__((used)) +uint8_t usb_log_offset; + +struct xfer_log { + uint8_t ep_num; + uint16_t size; +}; +__attribute__((used)) +struct xfer_log xfer_log[64]; +__attribute__((used)) +uint8_t xfer_log_offset; + +__attribute__((used)) +struct xfer_log queue_log[64]; +__attribute__((used)) +uint8_t queue_log_offset; +#endif + +//--------------------------------------------------------------------+ +// SIE Command +//--------------------------------------------------------------------+ + +#define EP_SIZE 64 + +uint16_t volatile rx_buffer_offset[16]; +uint8_t* volatile rx_buffer[16]; +uint16_t volatile rx_buffer_max[16]; + +volatile uint8_t tx_ep; +volatile bool tx_active; +volatile uint16_t tx_buffer_offset[16]; +uint8_t* volatile tx_buffer[16]; +volatile uint16_t tx_buffer_max[16]; +volatile uint8_t reset_count; + +#if DEBUG +__attribute__((used)) uint8_t volatile * last_tx_buffer; +__attribute__((used)) volatile uint8_t last_tx_ep; +uint8_t setup_packet_bfr[10]; +#endif + +//--------------------------------------------------------------------+ +// PIPE HELPER +//--------------------------------------------------------------------+ + +static bool advance_tx_ep(void) { + // Move on to the next transmit buffer in a round-robin manner + uint8_t prev_tx_ep = tx_ep; + for (tx_ep = (tx_ep + 1) & 0xf; tx_ep != prev_tx_ep; tx_ep = ((tx_ep + 1) & 0xf)) { + if (tx_buffer[tx_ep]) + return true; + } + if (!tx_buffer[tx_ep]) + return false; + return true; +} + +#if LOG_USB +void xfer_log_append(uint8_t ep_num, uint16_t sz) { + xfer_log[xfer_log_offset].ep_num = ep_num; + xfer_log[xfer_log_offset].size = sz; + xfer_log_offset++; + if (xfer_log_offset >= sizeof(xfer_log)/sizeof(*xfer_log)) + xfer_log_offset = 0; +} + +void queue_log_append(uint8_t ep_num, uint16_t sz) { + queue_log[queue_log_offset].ep_num = ep_num; + queue_log[queue_log_offset].size = sz; + queue_log_offset++; + if (queue_log_offset >= sizeof(queue_log)/sizeof(*queue_log)) + queue_log_offset = 0; +} +#endif + +static void tx_more_data(void) { + // Send more data + uint8_t added_bytes; + for (added_bytes = 0; (added_bytes < EP_SIZE) && (tx_buffer_offset[tx_ep] < tx_buffer_max[tx_ep]); added_bytes++) { +#if LOG_USB + usb_log[usb_log_offset].data[added_bytes] = tx_buffer[tx_ep][tx_buffer_offset[tx_ep]]; +#endif + usb_in_data_write(tx_buffer[tx_ep][tx_buffer_offset[tx_ep]++]); + } + +#if LOG_USB + usb_log[usb_log_offset].ep_num = tu_edpt_addr(tx_ep, TUSB_DIR_IN); + usb_log[usb_log_offset].size = added_bytes; + usb_log_offset++; + if (usb_log_offset >= sizeof(usb_log)/sizeof(*usb_log)) + usb_log_offset = 0; +#endif + + // Updating the epno queues the data + usb_in_ctrl_write(tx_ep & 0xf); +} + +static void process_tx(void) { +#if DEBUG + // If the system isn't idle, then something is very wrong. + uint8_t in_status = usb_in_status_read(); + if (!(in_status & (1 << CSR_USB_IN_STATUS_IDLE_OFFSET))) + fomu_error(__LINE__); +#endif + + // If the buffer is now empty, search for the next buffer to fill. + if (!tx_buffer[tx_ep]) { + if (advance_tx_ep()) + tx_more_data(); + else + tx_active = false; + return; + } + + if (tx_buffer_offset[tx_ep] >= tx_buffer_max[tx_ep]) { +#if DEBUG + last_tx_buffer = tx_buffer[tx_ep]; + last_tx_ep = tx_ep; +#endif + tx_buffer[tx_ep] = NULL; + uint16_t xferred_bytes = tx_buffer_max[tx_ep]; + uint8_t xferred_ep = tx_ep; + + if (!advance_tx_ep()) + tx_active = false; +#if LOG_USB + xfer_log_append(tu_edpt_addr(xferred_ep, TUSB_DIR_IN), xferred_bytes); +#endif + dcd_event_xfer_complete(0, tu_edpt_addr(xferred_ep, TUSB_DIR_IN), xferred_bytes, XFER_RESULT_SUCCESS, true); + if (!tx_active) + return; + } + + tx_more_data(); + return; +} + +static void process_rx(void) { + uint8_t out_status = usb_out_status_read(); +#if DEBUG + // If the OUT handler is still waiting to send, don't do anything. + if (!(out_status & (1 << CSR_USB_OUT_STATUS_HAVE_OFFSET))) + fomu_error(__LINE__); + // return; +#endif + uint8_t rx_ep = (out_status >> CSR_USB_OUT_STATUS_EPNO_OFFSET) & 0xf; + + // If the destination buffer doesn't exist, don't drain the hardware + // fifo. Note that this can cause deadlocks if the host is waiting + // on some other endpoint's data! +#if DEBUG + if (rx_buffer[rx_ep] == NULL) { + fomu_error(__LINE__); + return; + } +#endif + + // Drain the FIFO into the destination buffer + uint32_t total_read = 0; + uint32_t current_offset = rx_buffer_offset[rx_ep]; +#if DEBUG + uint8_t test_buffer[256]; + memset(test_buffer, 0, sizeof(test_buffer)); + if (current_offset > rx_buffer_max[rx_ep]) + fomu_error(__LINE__); +#endif +#if LOG_USB + usb_log[usb_log_offset].ep_num = tu_edpt_addr(rx_ep, TUSB_DIR_OUT); + usb_log[usb_log_offset].size = 0; +#endif + while (usb_out_status_read() & (1 << CSR_USB_OUT_STATUS_HAVE_OFFSET)) { + uint8_t c = usb_out_data_read(); +#if DEBUG + test_buffer[total_read] = c; +#endif + total_read++; + if (current_offset < rx_buffer_max[rx_ep]) { +#if LOG_USB + usb_log[usb_log_offset].data[usb_log[usb_log_offset].size++] = c; +#endif + if (rx_buffer[rx_ep] != (volatile uint8_t *)0xffffffff) + rx_buffer[rx_ep][current_offset++] = c; + } + } +#if LOG_USB + usb_log_offset++; + if (usb_log_offset >= sizeof(usb_log)/sizeof(*usb_log)) + usb_log_offset = 0; +#endif +#if DEBUG + if (total_read > 66) + fomu_error(__LINE__); + if (total_read < 2) + total_read = 2; + // fomu_error(__LINE__); +#endif + + // Strip off the CRC16 + rx_buffer_offset[rx_ep] += (total_read - 2); + if (rx_buffer_offset[rx_ep] > rx_buffer_max[rx_ep]) + rx_buffer_offset[rx_ep] = rx_buffer_max[rx_ep]; + + // If there's no more data, complete the transfer to tinyusb + if ((rx_buffer_max[rx_ep] == rx_buffer_offset[rx_ep]) + // ZLP with less than the total amount of data + || ((total_read == 2) && ((rx_buffer_offset[rx_ep] & 63) == 0)) + // Short read, but not a full packet + || (((rx_buffer_offset[rx_ep] & 63) != 0) && (total_read < 66))) { +#if DEBUG + if (rx_buffer[rx_ep] == NULL) + fomu_error(__LINE__); +#endif + + // Free up this buffer. + rx_buffer[rx_ep] = NULL; + uint16_t len = rx_buffer_offset[rx_ep]; + +#if DEBUG + // Validate that all enabled endpoints have buffers, + // and no disabled endpoints have buffers. + uint16_t ep_en_mask = usb_out_enable_status_read(); + int i; + for (i = 0; i < 16; i++) { + if ((!!(ep_en_mask & (1 << i))) ^ (!!(rx_buffer[i]))) { + uint8_t new_status = usb_out_status_read(); + // Another IRQ came in while we were processing, so ignore this endpoint. + if ((new_status & 0x20) && ((new_status & 0xf) == i)) + continue; + fomu_error(__LINE__); + } + } +#endif +#if LOG_USB + xfer_log_append(tu_edpt_addr(rx_ep, TUSB_DIR_OUT), len); +#endif + dcd_event_xfer_complete(0, tu_edpt_addr(rx_ep, TUSB_DIR_OUT), len, XFER_RESULT_SUCCESS, true); + } + else { + // If there's more data, re-enable data reception on this endpoint + usb_out_ctrl_write((1 << CSR_USB_OUT_CTRL_ENABLE_OFFSET) | rx_ep); + } + + // Now that the buffer is drained, clear the pending IRQ. + usb_out_ev_pending_write(usb_out_ev_pending_read()); +} + +//--------------------------------------------------------------------+ +// CONTROLLER API +//--------------------------------------------------------------------+ + +static void dcd_reset(void) +{ + reset_count++; + usb_setup_ev_enable_write(0); + usb_in_ev_enable_write(0); + usb_out_ev_enable_write(0); + + usb_address_write(0); + + // Reset all three FIFO handlers + usb_setup_ctrl_write(1 << CSR_USB_SETUP_CTRL_RESET_OFFSET); + usb_in_ctrl_write(1 << CSR_USB_IN_CTRL_RESET_OFFSET); + usb_out_ctrl_write(1 << CSR_USB_OUT_CTRL_RESET_OFFSET); + + memset((void *)rx_buffer, 0, sizeof(rx_buffer)); + memset((void *)rx_buffer_max, 0, sizeof(rx_buffer_max)); + memset((void *)rx_buffer_offset, 0, sizeof(rx_buffer_offset)); + + memset((void *)tx_buffer, 0, sizeof(tx_buffer)); + memset((void *)tx_buffer_max, 0, sizeof(tx_buffer_max)); + memset((void *)tx_buffer_offset, 0, sizeof(tx_buffer_offset)); + tx_ep = 0; + tx_active = false; + + // Enable all event handlers and clear their contents + usb_setup_ev_pending_write(0xff); + usb_in_ev_pending_write(0xff); + usb_out_ev_pending_write(0xff); + usb_in_ev_enable_write(1); + usb_out_ev_enable_write(1); + usb_setup_ev_enable_write(3); + + dcd_event_bus_reset(0, TUSB_SPEED_FULL, true); +} + +// Initializes the USB peripheral for device mode and enables it. +void dcd_init(uint8_t rhport) +{ + (void) rhport; + + usb_pullup_out_write(0); + + // Enable all event handlers and clear their contents + usb_setup_ev_pending_write(usb_setup_ev_pending_read()); + usb_in_ev_pending_write(usb_in_ev_pending_read()); + usb_out_ev_pending_write(usb_out_ev_pending_read()); + usb_in_ev_enable_write(1); + usb_out_ev_enable_write(1); + usb_setup_ev_enable_write(3); + + // Turn on the external pullup + usb_pullup_out_write(1); +} + +// Enables or disables the USB device interrupt(s). May be used to +// prevent concurrency issues when mutating data structures shared +// between main code and the interrupt handler. +void dcd_int_enable(uint8_t rhport) +{ + (void) rhport; + irq_setmask(irq_getmask() | (1 << USB_INTERRUPT)); +} + +void dcd_int_disable(uint8_t rhport) +{ + (void) rhport; + irq_setmask(irq_getmask() & ~(1 << USB_INTERRUPT)); +} + +// Called when the device is given a new bus address. +void dcd_set_address(uint8_t rhport, uint8_t dev_addr) +{ + // Respond with ACK status first before changing device address + dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); + + // Wait for the response packet to get sent + while (tx_active) + ; + + // Activate the new address + usb_address_write(dev_addr); +} + +// Called to remote wake up host when suspended (e.g hid keyboard) +void dcd_remote_wakeup(uint8_t rhport) +{ + (void) rhport; +} + +void dcd_connect(uint8_t rhport) +{ + (void) rhport; + usb_pullup_out_write(1); +} + +void dcd_disconnect(uint8_t rhport) +{ + (void) rhport; + usb_pullup_out_write(0); +} + + +//--------------------------------------------------------------------+ +// DCD Endpoint Port +//--------------------------------------------------------------------+ +bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) +{ + (void) rhport; + uint8_t ep_num = tu_edpt_number(p_endpoint_desc->bEndpointAddress); + uint8_t ep_dir = tu_edpt_dir(p_endpoint_desc->bEndpointAddress); + + if (p_endpoint_desc->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) + return false; // Not supported + + if (ep_dir == TUSB_DIR_OUT) { + rx_buffer_offset[ep_num] = 0; + rx_buffer_max[ep_num] = 0; + rx_buffer[ep_num] = NULL; + } + + else if (ep_dir == TUSB_DIR_IN) { + tx_buffer_offset[ep_num] = 0; + tx_buffer_max[ep_num] = 0; + tx_buffer[ep_num] = NULL; + } + + return true; +} + +void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) +{ + (void) rhport; + + if (tu_edpt_dir(ep_addr) == TUSB_DIR_OUT) { + uint8_t enable = 0; + if (rx_buffer[ep_addr]) + enable = 1; + usb_out_ctrl_write((1 << CSR_USB_OUT_CTRL_STALL_OFFSET) | (enable << CSR_USB_OUT_CTRL_ENABLE_OFFSET) | tu_edpt_number(ep_addr)); + } + else + usb_in_ctrl_write((1 << CSR_USB_IN_CTRL_STALL_OFFSET) | tu_edpt_number(ep_addr)); +} + +void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) +{ + (void) rhport; + if (tu_edpt_dir(ep_addr) == TUSB_DIR_OUT) { + uint8_t enable = 0; + if (rx_buffer[ep_addr]) + enable = 1; + usb_out_ctrl_write((0 << CSR_USB_OUT_CTRL_STALL_OFFSET) | (enable << CSR_USB_OUT_CTRL_ENABLE_OFFSET) | tu_edpt_number(ep_addr)); + } + // IN endpoints will get unstalled when more data is written. +} + +bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) +{ + (void)rhport; + uint8_t ep_num = tu_edpt_number(ep_addr); + uint8_t ep_dir = tu_edpt_dir(ep_addr); + TU_ASSERT(ep_num < 16); + + // Give a nonzero buffer when we transmit 0 bytes, so that the + // system doesn't think the endpoint is idle. + if ((buffer == NULL) && (total_bytes == 0)) { + buffer = (uint8_t *)0xffffffff; + } + + TU_ASSERT(buffer != NULL); + + if (ep_dir == TUSB_DIR_IN) { + // Wait for the tx pipe to free up + uint8_t previous_reset_count = reset_count; + // Continue until the buffer is empty, the system is idle, and the fifo is empty. + while (tx_buffer[ep_num] != NULL) + ; + + dcd_int_disable(0); +#if LOG_USB + queue_log_append(ep_addr, total_bytes); +#endif + // If a reset happens while we're waiting, abort the transfer + if (previous_reset_count != reset_count) + return true; + + TU_ASSERT(tx_buffer[ep_num] == NULL); + tx_buffer_offset[ep_num] = 0; + tx_buffer_max[ep_num] = total_bytes; + tx_buffer[ep_num] = buffer; + + // If the current buffer is NULL, then that means the tx logic is idle. + // Update the tx_ep to point to our endpoint number and queue the data. + // Otherwise, let it be and it'll get picked up after the next transfer + // finishes. + if (!tx_active) { + tx_ep = ep_num; + tx_active = true; + tx_more_data(); + } + dcd_int_enable(0); + } + + else if (ep_dir == TUSB_DIR_OUT) { + while (rx_buffer[ep_num] != NULL) + ; + + TU_ASSERT(rx_buffer[ep_num] == NULL); + dcd_int_disable(0); +#if LOG_USB + queue_log_append(ep_addr, total_bytes); +#endif + rx_buffer[ep_num] = buffer; + rx_buffer_offset[ep_num] = 0; + rx_buffer_max[ep_num] = total_bytes; + + // Enable receiving on this particular endpoint + usb_out_ctrl_write((1 << CSR_USB_OUT_CTRL_ENABLE_OFFSET) | ep_num); +#if DEBUG + uint16_t ep_en_mask = usb_out_enable_status_read(); + int i; + for (i = 0; i < 16; i++) { + if ((!!(ep_en_mask & (1 << i))) ^ (!!(rx_buffer[i]))) { + if (rx_buffer[i] && usb_out_ev_pending_read() && (usb_out_status_read() & 0xf) == i) + continue; + fomu_error(__LINE__); + } + } +#endif + dcd_int_enable(0); + } + return true; +} + +//--------------------------------------------------------------------+ +// ISR +//--------------------------------------------------------------------+ + +static void handle_out(void) +{ + // An "OUT" transaction just completed so we have new data. + // (But only if we can accept the data) +#if DEBUG + if (!usb_out_ev_pending_read()) + fomu_error(__LINE__); + if (!usb_out_ev_enable_read()) + fomu_error(__LINE__); +#endif + process_rx(); +} + +static void handle_in(void) +{ +#if DEBUG + if (!usb_in_ev_pending_read()) + fomu_error(__LINE__); + if (!usb_in_ev_enable_read()) + fomu_error(__LINE__); +#endif + usb_in_ev_pending_write(usb_in_ev_pending_read()); + process_tx(); +} + +static void handle_reset(void) +{ +#if DEBUG + uint8_t setup_pending = usb_setup_ev_pending_read() & usb_setup_ev_enable_read(); + if (!(setup_pending & 2)) + fomu_error(__LINE__); +#endif + usb_setup_ev_pending_write(2); + + // This event means a bus reset occurred. Reset everything, and + // abandon any further processing. + dcd_reset(); +} + +static void handle_setup(void) +{ +#if !DEBUG + uint8_t setup_packet_bfr[10]; +#endif + +#if DEBUG + uint8_t setup_pending = usb_setup_ev_pending_read() & usb_setup_ev_enable_read(); + if (!(setup_pending & 1)) + fomu_error(__LINE__); +#endif + + // We got a SETUP packet. Copy it to the setup buffer and clear + // the "pending" bit. + // Setup packets are always 8 bytes, plus two bytes of crc16. + uint32_t setup_length = 0; + +#if DEBUG + if (!(usb_setup_status_read() & (1 << CSR_USB_SETUP_STATUS_HAVE_OFFSET))) + fomu_error(__LINE__); +#endif + + while (usb_setup_status_read() & (1 << CSR_USB_SETUP_STATUS_HAVE_OFFSET)) { + uint8_t c = usb_setup_data_read(); + if (setup_length < sizeof(setup_packet_bfr)) + setup_packet_bfr[setup_length] = c; + setup_length++; + } + + // If we have 10 bytes, that's a full SETUP packet plus CRC16. + // Otherwise, it was an RX error. + if (setup_length == 10) { + dcd_event_setup_received(0, setup_packet_bfr, true); + } +#if DEBUG + else { + fomu_error(__LINE__); + } +#endif + + usb_setup_ev_pending_write(1); +} +void dcd_int_handler(uint8_t rhport) +{ + (void)rhport; + uint8_t next_ev; + while ((next_ev = usb_next_ev_read())) { + switch (next_ev) { + case 1 << CSR_USB_NEXT_EV_IN_OFFSET: + handle_in(); + break; + case 1 << CSR_USB_NEXT_EV_OUT_OFFSET: + handle_out(); + break; + case 1 << CSR_USB_NEXT_EV_SETUP_OFFSET: + handle_setup(); + break; + case 1 << CSR_USB_NEXT_EV_RESET_OFFSET: + handle_reset(); + break; + } + } +} + +#endif diff --git a/tinyusb/src/portable/valentyusb/eptri/dcd_eptri.h b/tinyusb/src/portable/valentyusb/eptri/dcd_eptri.h new file mode 100755 index 00000000..0fa6ecc6 --- /dev/null +++ b/tinyusb/src/portable/valentyusb/eptri/dcd_eptri.h @@ -0,0 +1,39 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _TUSB_DCD_VALENTYUSB_EPTRI_H_ +#define _TUSB_DCD_VALENTYUSB_EPTRI_H_ + +#include "common/tusb_common.h" +#ifdef __cplusplus + extern "C" { +#endif + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_DCD_VALENTYUSB_EPTRI_H_ */ |