diff options
Diffstat (limited to 'watch-library/config/hpl_slcd_config.h')
| -rw-r--r-- | watch-library/config/hpl_slcd_config.h | 2744 |
1 files changed, 2744 insertions, 0 deletions
diff --git a/watch-library/config/hpl_slcd_config.h b/watch-library/config/hpl_slcd_config.h new file mode 100644 index 00000000..72213432 --- /dev/null +++ b/watch-library/config/hpl_slcd_config.h @@ -0,0 +1,2744 @@ +/* Auto-generated config file hpl_slcd_config.h */ +#ifndef HPL_SLCD_CONFIG_H +#define HPL_SLCD_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +#include <hpl_slcd_cm.h> +#include <peripheral_clk_config.h> + +// <h> Standard configuration + +// <o> Number of COM Lines +// <i> Number of COM Lines +// <0=>1 +// <1=>2 +// <2=>3 +// <3=>4 +// <4=>6 +// <5=>8 +// <id> slcd_arch_com_num +#ifndef CONF_SLCD_COM_NUM +#define CONF_SLCD_COM_NUM 2 +#endif + +// <o> Number of Segment Lines <1-44> +// <i> Number of Segment Lines +// <id> slcd_arch_seg_num +#ifndef CONF_SLCD_SEG_NUM +#define CONF_SLCD_SEG_NUM 24 +#endif + +#if CONF_SLCD_COM_NUM == SLCD_CTRLA_DUTY_SIXTH_Val && CONF_SLCD_SEG_NUM > 42 +#warning Segment number should less than or equals to 42 +#endif +#if CONF_SLCD_COM_NUM == SLCD_CTRLA_DUTY_EIGHT_Val && CONF_SLCD_SEG_NUM > 40 +#warning Segment number should less than or equals to 40 +#endif + +// <o> Bias +// <i> Bias Settting +// <0=>STATIC +// <1=>HALF +// <2=>THIRD +// <3=>FOURTH +// <id> slcd_arch_bias +#ifndef CONF_SLCD_BIAS +#define CONF_SLCD_BIAS 2 +#endif + +#if CONF_SLCD_COM_NUM == 0 && CONF_SLCD_BIAS != 0 +#warning Recommended Bias for 1 common terminal is STATIC +#elif CONF_SLCD_COM_NUM == 1 && CONF_SLCD_BIAS != 1 +#warning Recommended Bias for 2 Common Terminals is HALF +#elif CONF_SLCD_COM_NUM <= 4 && CONF_SLCD_BIAS != 2 +#warning Recommended Bias for 3/4/6 Common Terminals is THIRD +#elif CONF_SLCD_COM_NUM == 5 && CONF_SLCD_BIAS != 3 +#warning Recommended Bias for 8 Common Terminals is FOURTH +#endif + +// <q> Bias Buffer Enable +// <i> Enable Bias Buffer +// <id> slcd_arch_bben +#ifndef CONF_SLCD_BBEN +#define CONF_SLCD_BBEN 1 +#endif + +// <o> Bias Buffer Enable Duration <1-16> +// <i> Configure the enable duration of the bias buffer, unit is cycle of SLCD OSC clock source +// <id> slcd_arch_bbd +#ifndef CONF_SLCD_BBD +#define CONF_SLCD_BBD 2 +#endif + +// <o> Clock Prescaler +// <i> Setting for LCD frame frequency +// <0=>16 +// <1=>32 +// <2=>64 +// <3=>128 +// <id> slcd_arch_presc +#ifndef CONF_SLCD_PRESC +#define CONF_SLCD_PRESC 2 +#endif + +// <o> Clock Divider +// <i> Setting for LCD frame frequency +// <0=>1 +// <1=>2 +// <2=>3 +// <3=>4 +// <4=>5 +// <5=>6 +// <6=>7 +// <7=>8 +// <id> slcd_arch_ckdiv +#ifndef CONF_SLCD_CKDIV +#define CONF_SLCD_CKDIV 3 +#endif + +/* TODO add frame frequency check */ + +// <o> Reference Refresh Frequency +// <i> Setting for Reference Refresh Frequency +// <0=>2kHz +// <1=>1kHz +// <2=>500Hz +// <3=>250Hz +// <4=>125Hz +// <5=>62.5Hz +// <id> slcd_arch_rrf +#ifndef CONF_SLCD_RRF +#define CONF_SLCD_RRF 0 +#endif + +// <o> Power Refresh Frequency +// <i> Setting for Charge pump Refresh Frequency +// <0=>2kHz +// <1=>1kHz +// <2=>500Hz +// <3=>250Hz +// <id> slcd_arch_prf +#ifndef CONF_SLCD_PRF +#define CONF_SLCD_PRF 3 +#endif + +// <q> External VLCD +// <i> Setting for how VLCD is generated +// <id> slcd_arch_xvlcd +#ifndef CONF_SLCD_XVLCD +#define CONF_SLCD_XVLCD 0 +#endif + +// <o> Waveform Mode +// <i> Setting for Waveform Mode +// <0=>Low Power Waveform(frame-inversion) +// <1=>Standard Waveform Mode(bit-inversion) +// <id> slcd_arch_wmod +#ifndef CONF_SLCD_WMOD +#define CONF_SLCD_WMOD 0 +#endif + +// <o> Contrast Adjustment +// <i> The contrast of the LCD is determined by the value of VLCD voltage. +// <i> The higher the VLCD voltage, the higher is the contrast. +// <i> The software contrast adjustment is only possible in internal supply mode. +// <0=>2.5056V +// <1=>2.5731V +// <2=>2.6379V +// <3=>2.7054V +// <4=>2.7729V +// <5=>2.8404V +// <6=>2.9052V +// <7=>2.9727V +// <8=>3.0402V +// <9=>3.1077V +// <10=>3.1725V +// <11=>3.24V +// <12=>3.3075V +// <13=>3.375V +// <14=>3.4398V +// <15=>3.5073V +// <id> slcd_arch_contrast_adjust +#ifndef CONF_SLCD_CONTRAST_ADJUST +#define CONF_SLCD_CONTRAST_ADJUST 14 +#endif + +// </h> + +// <e> Advanced configuration +// <id> slcd_arch_advanced_settings +#ifndef CONF_SLCD_ADVANCED_SETTINGS +#define CONF_SLCD_ADVANCED_SETTINGS 1 +#endif + +// <q> Run in standby +// <i> Indicates whether the SLCD will continue running in standby sleep mode or not +// <id> slcd_arch_runstdby +#ifndef CONF_SLCD_RUNSTDBY +#define CONF_SLCD_RUNSTDBY 1 +#endif + +// </e> + +#if SLCD_FRAME_FREQUENCY < 30 || SLCD_FRAME_FREQUENCY > 100 +#warning The optimal frame frequency should be in range from 30Hz up to 100Hz to avoid flickering and ghosting effect. +#endif + +#define SLCD_FC_MAX_MS (((0x1F + 1) * 8) * (1000 / SLCD_FRAME_FREQUENCY)) +#define SLCD_FC_MIN_MS (1000 / SLCD_FRAME_FREQUENCY) +#define SLCD_FC_BYPASS_MAX_MS ((0x1F + 1) * (1000 / SLCD_FRAME_FREQUENCY)) + +// <e> Character Mapping Setting +// <id> slcd_arch_cm_setting +#ifndef CONF_SLCD_CM_ENABLE +#define CONF_SLCD_CM_ENABLE 0 +#endif + +// <e> 7 Segment Character Mapping Setting +// <id> slcd_arch_cm_7segs_setting +#ifndef CONF_SLCD_CM_7SEGS_SETTING +#define CONF_SLCD_CM_7SEGS_SETTING 0 +#endif + +// <o> Segment 0 Setting +// <i> Segment index for the character mapping area +// <i> Index 0 is the Character mapping beinging COMn/SEGn, Index 1 is COMn/SEGn + 1 +// <id> slcd_arch_cm_7segs_0_mapping_setting +// <0=>0 +// <1=>1 +// <2=>2 +// <3=>3 +// <4=>4 +// <5=>5 +// <6=>6 +// <7=>7 +// <8=>8 +// <9=>9 +// <10=>10 +// <11=>11 +// <12=>12 +// <13=>13 +// <14=>14 +// <15=>15 +// <16=>16 +// <17=>17 +// <18=>18 +// <19=>19 +// <20=>20 +// <21=>21 +// <22=>22 +// <23=>23 +#ifndef CONF_SLCD_CM_7SEGS_0_SETTING +#define CONF_SLCD_CM_7SEGS_0_SETTING 0 +#endif +// <o> Segment 1 Setting +// <i> Segment index for the character mapping area +// <i> Index 0 is the Character mapping beinging COMn/SEGn, Index 1 is COMn/SEGn + 1 +// <id> slcd_arch_cm_7segs_1_mapping_setting +// <0=>0 +// <1=>1 +// <2=>2 +// <3=>3 +// <4=>4 +// <5=>5 +// <6=>6 +// <7=>7 +// <8=>8 +// <9=>9 +// <10=>10 +// <11=>11 +// <12=>12 +// <13=>13 +// <14=>14 +// <15=>15 +// <16=>16 +// <17=>17 +// <18=>18 +// <19=>19 +// <20=>20 +// <21=>21 +// <22=>22 +// <23=>23 +#ifndef CONF_SLCD_CM_7SEGS_1_SETTING +#define CONF_SLCD_CM_7SEGS_1_SETTING 1 +#endif +// <o> Segment 2 Setting +// <i> Segment index for the character mapping area +// <i> Index 0 is the Character mapping beinging COMn/SEGn, Index 1 is COMn/SEGn + 1 +// <id> slcd_arch_cm_7segs_2_mapping_setting +// <0=>0 +// <1=>1 +// <2=>2 +// <3=>3 +// <4=>4 +// <5=>5 +// <6=>6 +// <7=>7 +// <8=>8 +// <9=>9 +// <10=>10 +// <11=>11 +// <12=>12 +// <13=>13 +// <14=>14 +// <15=>15 +// <16=>16 +// <17=>17 +// <18=>18 +// <19=>19 +// <20=>20 +// <21=>21 +// <22=>22 +// <23=>23 +#ifndef CONF_SLCD_CM_7SEGS_2_SETTING +#define CONF_SLCD_CM_7SEGS_2_SETTING 2 +#endif +// <o> Segment 3 Setting +// <i> Segment index for the character mapping area +// <i> Index 0 is the Character mapping beinging COMn/SEGn, Index 1 is COMn/SEGn + 1 +// <id> slcd_arch_cm_7segs_3_mapping_setting +// <0=>0 +// <1=>1 +// <2=>2 +// <3=>3 +// <4=>4 +// <5=>5 +// <6=>6 +// <7=>7 +// <8=>8 +// <9=>9 +// <10=>10 +// <11=>11 +// <12=>12 +// <13=>13 +// <14=>14 +// <15=>15 +// <16=>16 +// <17=>17 +// <18=>18 +// <19=>19 +// <20=>20 +// <21=>21 +// <22=>22 +// <23=>23 +#ifndef CONF_SLCD_CM_7SEGS_3_SETTING +#define CONF_SLCD_CM_7SEGS_3_SETTING 3 +#endif +// <o> Segment 4 Setting +// <i> Segment index for the character mapping area +// <i> Index 0 is the Character mapping beinging COMn/SEGn, Index 1 is COMn/SEGn + 1 +// <id> slcd_arch_cm_7segs_4_mapping_setting +// <0=>0 +// <1=>1 +// <2=>2 +// <3=>3 +// <4=>4 +// <5=>5 +// <6=>6 +// <7=>7 +// <8=>8 +// <9=>9 +// <10=>10 +// <11=>11 +// <12=>12 +// <13=>13 +// <14=>14 +// <15=>15 +// <16=>16 +// <17=>17 +// <18=>18 +// <19=>19 +// <20=>20 +// <21=>21 +// <22=>22 +// <23=>23 +#ifndef CONF_SLCD_CM_7SEGS_4_SETTING +#define CONF_SLCD_CM_7SEGS_4_SETTING 4 +#endif +// <o> Segment 5 Setting +// <i> Segment index for the character mapping area +// <i> Index 0 is the Character mapping beinging COMn/SEGn, Index 1 is COMn/SEGn + 1 +// <id> slcd_arch_cm_7segs_5_mapping_setting +// <0=>0 +// <1=>1 +// <2=>2 +// <3=>3 +// <4=>4 +// <5=>5 +// <6=>6 +// <7=>7 +// <8=>8 +// <9=>9 +// <10=>10 +// <11=>11 +// <12=>12 +// <13=>13 +// <14=>14 +// <15=>15 +// <16=>16 +// <17=>17 +// <18=>18 +// <19=>19 +// <20=>20 +// <21=>21 +// <22=>22 +// <23=>23 +#ifndef CONF_SLCD_CM_7SEGS_5_SETTING +#define CONF_SLCD_CM_7SEGS_5_SETTING 5 +#endif +// <o> Segment 6 Setting +// <i> Segment index for the character mapping area +// <i> Index 0 is the Character mapping beinging COMn/SEGn, Index 1 is COMn/SEGn + 1 +// <id> slcd_arch_cm_7segs_6_mapping_setting +// <0=>0 +// <1=>1 +// <2=>2 +// <3=>3 +// <4=>4 +// <5=>5 +// <6=>6 +// <7=>7 +// <8=>8 +// <9=>9 +// <10=>10 +// <11=>11 +// <12=>12 +// <13=>13 +// <14=>14 +// <15=>15 +// <16=>16 +// <17=>17 +// <18=>18 +// <19=>19 +// <20=>20 +// <21=>21 +// <22=>22 +// <23=>23 +#ifndef CONF_SLCD_CM_7SEGS_6_SETTING +#define CONF_SLCD_CM_7SEGS_6_SETTING 6 +#endif + +// </e> + +// <e> 14 Segment Character Mapping Setting +// <id> slcd_arch_cm_14segs_enable +#ifndef CONF_SLCD_CM_14SEGS_ENABLE +#define CONF_SLCD_CM_14SEGS_ENABLE 0 +#endif + +// <o> Segments 0 Setting +// <i> Segment index for the character mapping area +// <i> Index 0 is the Character mapping beinging COMn/SEGn, Index 1 is COMn/SEGn + 1 +// <id> slcd_arch_cm_14segs_0_mapping_setting +// <0=>0 +// <1=>1 +// <2=>2 +// <3=>3 +// <4=>4 +// <5=>5 +// <6=>6 +// <7=>7 +// <8=>8 +// <9=>9 +// <10=>10 +// <11=>11 +// <12=>12 +// <13=>13 +// <14=>14 +// <15=>15 +// <16=>16 +// <17=>17 +// <18=>18 +// <19=>19 +// <20=>20 +// <21=>21 +// <22=>22 +// <23=>23 +#ifndef CONF_SLCD_CM_14SEGS_0_SETTING +#define CONF_SLCD_CM_14SEGS_0_SETTING 0 +#endif + +// <o> Segments 1 Setting +// <i> Segment index for the character mapping area +// <i> Index 0 is the Character mapping beinging COMn/SEGn, Index 1 is COMn/SEGn + 1 +// <id> slcd_arch_cm_14segs_1_mapping_setting +// <0=>0 +// <1=>1 +// <2=>2 +// <3=>3 +// <4=>4 +// <5=>5 +// <6=>6 +// <7=>7 +// <8=>8 +// <9=>9 +// <10=>10 +// <11=>11 +// <12=>12 +// <13=>13 +// <14=>14 +// <15=>15 +// <16=>16 +// <17=>17 +// <18=>18 +// <19=>19 +// <20=>20 +// <21=>21 +// <22=>22 +// <23=>23 +#ifndef CONF_SLCD_CM_14SEGS_1_SETTING +#define CONF_SLCD_CM_14SEGS_1_SETTING 1 +#endif + +// <o> Segments 2 Setting +// <i> Segment index for the character mapping area +// <i> Index 0 is the Character mapping beinging COMn/SEGn, Index 1 is COMn/SEGn + 1 +// <id> slcd_arch_cm_14segs_2_mapping_setting +// <0=>0 +// <1=>1 +// <2=>2 +// <3=>3 +// <4=>4 +// <5=>5 +// <6=>6 +// <7=>7 +// <8=>8 +// <9=>9 +// <10=>10 +// <11=>11 +// <12=>12 +// <13=>13 +// <14=>14 +// <15=>15 +// <16=>16 +// <17=>17 +// <18=>18 +// <19=>19 +// <20=>20 +// <21=>21 +// <22=>22 +// <23=>23 +#ifndef CONF_SLCD_CM_14SEGS_2_SETTING +#define CONF_SLCD_CM_14SEGS_2_SETTING 2 +#endif + +// <o> Segments 3 Setting +// <i> Segment index for the character mapping area +// <i> Index 0 is the Character mapping beinging COMn/SEGn, Index 1 is COMn/SEGn + 1 +// <id> slcd_arch_cm_14segs_3_mapping_setting +// <0=>0 +// <1=>1 +// <2=>2 +// <3=>3 +// <4=>4 +// <5=>5 +// <6=>6 +// <7=>7 +// <8=>8 +// <9=>9 +// <10=>10 +// <11=>11 +// <12=>12 +// <13=>13 +// <14=>14 +// <15=>15 +// <16=>16 +// <17=>17 +// <18=>18 +// <19=>19 +// <20=>20 +// <21=>21 +// <22=>22 +// <23=>23 +#ifndef CONF_SLCD_CM_14SEGS_3_SETTING +#define CONF_SLCD_CM_14SEGS_3_SETTING 3 +#endif + +// <o> Segments 4 Setting +// <i> Segment index for the character mapping area +// <i> Index 0 is the Character mapping beinging COMn/SEGn, Index 1 is COMn/SEGn + 1 +// <id> slcd_arch_cm_14segs_4_mapping_setting +// <0=>0 +// <1=>1 +// <2=>2 +// <3=>3 +// <4=>4 +// <5=>5 +// <6=>6 +// <7=>7 +// <8=>8 +// <9=>9 +// <10=>10 +// <11=>11 +// <12=>12 +// <13=>13 +// <14=>14 +// <15=>15 +// <16=>16 +// <17=>17 +// <18=>18 +// <19=>19 +// <20=>20 +// <21=>21 +// <22=>22 +// <23=>23 +#ifndef CONF_SLCD_CM_14SEGS_4_SETTING +#define CONF_SLCD_CM_14SEGS_4_SETTING 4 +#endif + +// <o> Segments 5 Setting +// <i> Segment index for the character mapping area +// <i> Index 0 is the Character mapping beinging COMn/SEGn, Index 1 is COMn/SEGn + 1 +// <id> slcd_arch_cm_14segs_5_mapping_setting +// <0=>0 +// <1=>1 +// <2=>2 +// <3=>3 +// <4=>4 +// <5=>5 +// <6=>6 +// <7=>7 +// <8=>8 +// <9=>9 +// <10=>10 +// <11=>11 +// <12=>12 +// <13=>13 +// <14=>14 +// <15=>15 +// <16=>16 +// <17=>17 +// <18=>18 +// <19=>19 +// <20=>20 +// <21=>21 +// <22=>22 +// <23=>23 +#ifndef CONF_SLCD_CM_14SEGS_5_SETTING +#define CONF_SLCD_CM_14SEGS_5_SETTING 5 +#endif + +// <o> Segments 6 Setting +// <i> Segment index for the character mapping area +// <i> Index 0 is the Character mapping beinging COMn/SEGn, Index 1 is COMn/SEGn + 1 +// <id> slcd_arch_cm_14segs_6_mapping_setting +// <0=>0 +// <1=>1 +// <2=>2 +// <3=>3 +// <4=>4 +// <5=>5 +// <6=>6 +// <7=>7 +// <8=>8 +// <9=>9 +// <10=>10 +// <11=>11 +// <12=>12 +// <13=>13 +// <14=>14 +// <15=>15 +// <16=>16 +// <17=>17 +// <18=>18 +// <19=>19 +// <20=>20 +// <21=>21 +// <22=>22 +// <23=>23 +#ifndef CONF_SLCD_CM_14SEGS_6_SETTING +#define CONF_SLCD_CM_14SEGS_6_SETTING 6 +#endif + +// <o> Segments 7 Setting +// <i> Segment index for the character mapping area +// <i> Index 0 is the Character mapping beinging COMn/SEGn, Index 1 is COMn/SEGn + 1 +// <id> slcd_arch_cm_14segs_7_mapping_setting +// <0=>0 +// <1=>1 +// <2=>2 +// <3=>3 +// <4=>4 +// <5=>5 +// <6=>6 +// <7=>7 +// <8=>8 +// <9=>9 +// <10=>10 +// <11=>11 +// <12=>12 +// <13=>13 +// <14=>14 +// <15=>15 +// <16=>16 +// <17=>17 +// <18=>18 +// <19=>19 +// <20=>20 +// <21=>21 +// <22=>22 +// <23=>23 +#ifndef CONF_SLCD_CM_14SEGS_7_SETTING +#define CONF_SLCD_CM_14SEGS_7_SETTING 7 +#endif + +// <o> Segments 8 Setting +// <i> Segment index for the character mapping area +// <i> Index 0 is the Character mapping beinging COMn/SEGn, Index 1 is COMn/SEGn + 1 +// <id> slcd_arch_cm_14segs_8_mapping_setting +// <0=>0 +// <1=>1 +// <2=>2 +// <3=>3 +// <4=>4 +// <5=>5 +// <6=>6 +// <7=>7 +// <8=>8 +// <9=>9 +// <10=>10 +// <11=>11 +// <12=>12 +// <13=>13 +// <14=>14 +// <15=>15 +// <16=>16 +// <17=>17 +// <18=>18 +// <19=>19 +// <20=>20 +// <21=>21 +// <22=>22 +// <23=>23 +#ifndef CONF_SLCD_CM_14SEGS_8_SETTING +#define CONF_SLCD_CM_14SEGS_8_SETTING 8 +#endif + +// <o> Segments 9 Setting +// <i> Segment index for the character mapping area +// <i> Index 0 is the Character mapping beinging COMn/SEGn, Index 1 is COMn/SEGn + 1 +// <id> slcd_arch_cm_14segs_9_mapping_setting +// <0=>0 +// <1=>1 +// <2=>2 +// <3=>3 +// <4=>4 +// <5=>5 +// <6=>6 +// <7=>7 +// <8=>8 +// <9=>9 +// <10=>10 +// <11=>11 +// <12=>12 +// <13=>13 +// <14=>14 +// <15=>15 +// <16=>16 +// <17=>17 +// <18=>18 +// <19=>19 +// <20=>20 +// <21=>21 +// <22=>22 +// <23=>23 +#ifndef CONF_SLCD_CM_14SEGS_9_SETTING +#define CONF_SLCD_CM_14SEGS_9_SETTING 9 +#endif + +// <o> Segments 10 Setting +// <i> Segment index for the character mapping area +// <i> Index 0 is the Character mapping beinging COMn/SEGn, Index 1 is COMn/SEGn + 1 +// <id> slcd_arch_cm_14segs_10_mapping_setting +// <0=>0 +// <1=>1 +// <2=>2 +// <3=>3 +// <4=>4 +// <5=>5 +// <6=>6 +// <7=>7 +// <8=>8 +// <9=>9 +// <10=>10 +// <11=>11 +// <12=>12 +// <13=>13 +// <14=>14 +// <15=>15 +// <16=>16 +// <17=>17 +// <18=>18 +// <19=>19 +// <20=>20 +// <21=>21 +// <22=>22 +// <23=>23 +#ifndef CONF_SLCD_CM_14SEGS_10_SETTING +#define CONF_SLCD_CM_14SEGS_10_SETTING 10 +#endif + +// <o> Segments 11 Setting +// <i> Segment index for the character mapping area +// <i> Index 0 is the Character mapping beinging COMn/SEGn, Index 1 is COMn/SEGn + 1 +// <id> slcd_arch_cm_14segs_11_mapping_setting +// <0=>0 +// <1=>1 +// <2=>2 +// <3=>3 +// <4=>4 +// <5=>5 +// <6=>6 +// <7=>7 +// <8=>8 +// <9=>9 +// <10=>10 +// <11=>11 +// <12=>12 +// <13=>13 +// <14=>14 +// <15=>15 +// <16=>16 +// <17=>17 +// <18=>18 +// <19=>19 +// <20=>20 +// <21=>21 +// <22=>22 +// <23=>23 +#ifndef CONF_SLCD_CM_14SEGS_11_SETTING +#define CONF_SLCD_CM_14SEGS_11_SETTING 11 +#endif + +// <o> Segments 12 Setting +// <i> Segment index for the character mapping area +// <i> Index 0 is the Character mapping beinging COMn/SEGn, Index 1 is COMn/SEGn + 1 +// <id> slcd_arch_cm_14segs_12_mapping_setting +// <0=>0 +// <1=>1 +// <2=>2 +// <3=>3 +// <4=>4 +// <5=>5 +// <6=>6 +// <7=>7 +// <8=>8 +// <9=>9 +// <10=>10 +// <11=>11 +// <12=>12 +// <13=>13 +// <14=>14 +// <15=>15 +// <16=>16 +// <17=>17 +// <18=>18 +// <19=>19 +// <20=>20 +// <21=>21 +// <22=>22 +// <23=>23 +#ifndef CONF_SLCD_CM_14SEGS_12_SETTING +#define CONF_SLCD_CM_14SEGS_12_SETTING 12 +#endif + +// <o> Segments 13 Setting +// <i> Segment index for the character mapping area +// <i> Index 0 is the Character mapping beinging COMn/SEGn, Index 1 is COMn/SEGn + 1 +// <id> slcd_arch_cm_14segs_13_mapping_setting +// <0=>0 +// <1=>1 +// <2=>2 +// <3=>3 +// <4=>4 +// <5=>5 +// <6=>6 +// <7=>7 +// <8=>8 +// <9=>9 +// <10=>10 +// <11=>11 +// <12=>12 +// <13=>13 +// <14=>14 +// <15=>15 +// <16=>16 +// <17=>17 +// <18=>18 +// <19=>19 +// <20=>20 +// <21=>21 +// <22=>22 +// <23=>23 +#ifndef CONF_SLCD_CM_14SEGS_13_SETTING +#define CONF_SLCD_CM_14SEGS_13_SETTING 13 +#endif + +// </e> + +// <e> Character 0 Mapping Setting +// <id> slcd_arch_char0_setting +#ifndef CONF_SLCD_CHAR0_ENABLE_SETTING +#define CONF_SLCD_CHAR0_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character0 COM begin index +// <id> slcd_arch_char0_com_idx +#ifndef CONF_SLCD_CHAR0_COM_IDX +#define CONF_SLCD_CHAR0_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character0 Segment begin index +// <id> slcd_arch_char0_seg_idx +#ifndef CONF_SLCD_CHAR0_SEG_IDX +#define CONF_SLCD_CHAR0_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character0 mapping +// <id> slcd_arch_char0_seg_num +#ifndef CONF_SLCD_CHAR0_SEG_NUM +#define CONF_SLCD_CHAR0_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character0 +// <id> slcd_arch_char0_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR0_MAPPING_TABLE +#define CONF_SLCD_CHAR0_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 1 Mapping Setting +// <id> slcd_arch_char1_setting +#ifndef CONF_SLCD_CHAR1_ENABLE_SETTING +#define CONF_SLCD_CHAR1_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character1 COM begin index +// <id> slcd_arch_char1_com_idx +#ifndef CONF_SLCD_CHAR1_COM_IDX +#define CONF_SLCD_CHAR1_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character1 Segment begin index +// <id> slcd_arch_char1_seg_idx +#ifndef CONF_SLCD_CHAR1_SEG_IDX +#define CONF_SLCD_CHAR1_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character1 mapping +// <id> slcd_arch_char1_seg_num +#ifndef CONF_SLCD_CHAR1_SEG_NUM +#define CONF_SLCD_CHAR1_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character1 +// <id> slcd_arch_char1_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR1_MAPPING_TABLE +#define CONF_SLCD_CHAR1_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 2 Mapping Setting +// <id> slcd_arch_char2_setting +#ifndef CONF_SLCD_CHAR2_ENABLE_SETTING +#define CONF_SLCD_CHAR2_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character2 COM begin index +// <id> slcd_arch_char2_com_idx +#ifndef CONF_SLCD_CHAR2_COM_IDX +#define CONF_SLCD_CHAR2_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character2 Segment begin index +// <id> slcd_arch_char2_seg_idx +#ifndef CONF_SLCD_CHAR2_SEG_IDX +#define CONF_SLCD_CHAR2_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character2 mapping +// <id> slcd_arch_char2_seg_num +#ifndef CONF_SLCD_CHAR2_SEG_NUM +#define CONF_SLCD_CHAR2_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character2 +// <id> slcd_arch_char2_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR2_MAPPING_TABLE +#define CONF_SLCD_CHAR2_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 3 Mapping Setting +// <id> slcd_arch_char3_setting +#ifndef CONF_SLCD_CHAR3_ENABLE_SETTING +#define CONF_SLCD_CHAR3_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character3 COM begin index +// <id> slcd_arch_char3_com_idx +#ifndef CONF_SLCD_CHAR3_COM_IDX +#define CONF_SLCD_CHAR3_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character3 Segment begin index +// <id> slcd_arch_char3_seg_idx +#ifndef CONF_SLCD_CHAR3_SEG_IDX +#define CONF_SLCD_CHAR3_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character3 mapping +// <id> slcd_arch_char3_seg_num +#ifndef CONF_SLCD_CHAR3_SEG_NUM +#define CONF_SLCD_CHAR3_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character3 +// <id> slcd_arch_char3_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR3_MAPPING_TABLE +#define CONF_SLCD_CHAR3_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 4 Mapping Setting +// <id> slcd_arch_char4_setting +#ifndef CONF_SLCD_CHAR4_ENABLE_SETTING +#define CONF_SLCD_CHAR4_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character4 COM begin index +// <id> slcd_arch_char4_com_idx +#ifndef CONF_SLCD_CHAR4_COM_IDX +#define CONF_SLCD_CHAR4_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character4 Segment begin index +// <id> slcd_arch_char4_seg_idx +#ifndef CONF_SLCD_CHAR4_SEG_IDX +#define CONF_SLCD_CHAR4_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character4 mapping +// <id> slcd_arch_char4_seg_num +#ifndef CONF_SLCD_CHAR4_SEG_NUM +#define CONF_SLCD_CHAR4_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character4 +// <id> slcd_arch_char4_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR4_MAPPING_TABLE +#define CONF_SLCD_CHAR4_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 5 Mapping Setting +// <id> slcd_arch_char5_setting +#ifndef CONF_SLCD_CHAR5_ENABLE_SETTING +#define CONF_SLCD_CHAR5_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character5 COM begin index +// <id> slcd_arch_char5_com_idx +#ifndef CONF_SLCD_CHAR5_COM_IDX +#define CONF_SLCD_CHAR5_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character5 Segment begin index +// <id> slcd_arch_char5_seg_idx +#ifndef CONF_SLCD_CHAR5_SEG_IDX +#define CONF_SLCD_CHAR5_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character5 mapping +// <id> slcd_arch_char5_seg_num +#ifndef CONF_SLCD_CHAR5_SEG_NUM +#define CONF_SLCD_CHAR5_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character5 +// <id> slcd_arch_char5_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR5_MAPPING_TABLE +#define CONF_SLCD_CHAR5_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 6 Mapping Setting +// <id> slcd_arch_char6_setting +#ifndef CONF_SLCD_CHAR6_ENABLE_SETTING +#define CONF_SLCD_CHAR6_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character6 COM begin index +// <id> slcd_arch_char6_com_idx +#ifndef CONF_SLCD_CHAR6_COM_IDX +#define CONF_SLCD_CHAR6_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character6 Segment begin index +// <id> slcd_arch_char6_seg_idx +#ifndef CONF_SLCD_CHAR6_SEG_IDX +#define CONF_SLCD_CHAR6_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character6 mapping +// <id> slcd_arch_char6_seg_num +#ifndef CONF_SLCD_CHAR6_SEG_NUM +#define CONF_SLCD_CHAR6_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character6 +// <id> slcd_arch_char6_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR6_MAPPING_TABLE +#define CONF_SLCD_CHAR6_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 7 Mapping Setting +// <id> slcd_arch_char7_setting +#ifndef CONF_SLCD_CHAR7_ENABLE_SETTING +#define CONF_SLCD_CHAR7_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character7 COM begin index +// <id> slcd_arch_char7_com_idx +#ifndef CONF_SLCD_CHAR7_COM_IDX +#define CONF_SLCD_CHAR7_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character7 Segment begin index +// <id> slcd_arch_char7_seg_idx +#ifndef CONF_SLCD_CHAR7_SEG_IDX +#define CONF_SLCD_CHAR7_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character7 mapping +// <id> slcd_arch_char7_seg_num +#ifndef CONF_SLCD_CHAR7_SEG_NUM +#define CONF_SLCD_CHAR7_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character7 +// <id> slcd_arch_char7_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR7_MAPPING_TABLE +#define CONF_SLCD_CHAR7_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 8 Mapping Setting +// <id> slcd_arch_char8_setting +#ifndef CONF_SLCD_CHAR8_ENABLE_SETTING +#define CONF_SLCD_CHAR8_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character8 COM begin index +// <id> slcd_arch_char8_com_idx +#ifndef CONF_SLCD_CHAR8_COM_IDX +#define CONF_SLCD_CHAR8_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character8 Segment begin index +// <id> slcd_arch_char8_seg_idx +#ifndef CONF_SLCD_CHAR8_SEG_IDX +#define CONF_SLCD_CHAR8_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character8 mapping +// <id> slcd_arch_char8_seg_num +#ifndef CONF_SLCD_CHAR8_SEG_NUM +#define CONF_SLCD_CHAR8_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character8 +// <id> slcd_arch_char8_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR8_MAPPING_TABLE +#define CONF_SLCD_CHAR8_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 9 Mapping Setting +// <id> slcd_arch_char9_setting +#ifndef CONF_SLCD_CHAR9_ENABLE_SETTING +#define CONF_SLCD_CHAR9_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character9 COM begin index +// <id> slcd_arch_char9_com_idx +#ifndef CONF_SLCD_CHAR9_COM_IDX +#define CONF_SLCD_CHAR9_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character9 Segment begin index +// <id> slcd_arch_char9_seg_idx +#ifndef CONF_SLCD_CHAR9_SEG_IDX +#define CONF_SLCD_CHAR9_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character9 mapping +// <id> slcd_arch_char9_seg_num +#ifndef CONF_SLCD_CHAR9_SEG_NUM +#define CONF_SLCD_CHAR9_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character9 +// <id> slcd_arch_char9_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR9_MAPPING_TABLE +#define CONF_SLCD_CHAR9_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 10 Mapping Setting +// <id> slcd_arch_char10_setting +#ifndef CONF_SLCD_CHAR10_ENABLE_SETTING +#define CONF_SLCD_CHAR10_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character10 COM begin index +// <id> slcd_arch_char10_com_idx +#ifndef CONF_SLCD_CHAR10_COM_IDX +#define CONF_SLCD_CHAR10_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character10 Segment begin index +// <id> slcd_arch_char10_seg_idx +#ifndef CONF_SLCD_CHAR10_SEG_IDX +#define CONF_SLCD_CHAR10_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character10 mapping +// <id> slcd_arch_char10_seg_num +#ifndef CONF_SLCD_CHAR10_SEG_NUM +#define CONF_SLCD_CHAR10_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character10 +// <id> slcd_arch_char10_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR10_MAPPING_TABLE +#define CONF_SLCD_CHAR10_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 11 Mapping Setting +// <id> slcd_arch_char11_setting +#ifndef CONF_SLCD_CHAR11_ENABLE_SETTING +#define CONF_SLCD_CHAR11_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character11 COM begin index +// <id> slcd_arch_char11_com_idx +#ifndef CONF_SLCD_CHAR11_COM_IDX +#define CONF_SLCD_CHAR11_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character11 Segment begin index +// <id> slcd_arch_char11_seg_idx +#ifndef CONF_SLCD_CHAR11_SEG_IDX +#define CONF_SLCD_CHAR11_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character11 mapping +// <id> slcd_arch_char11_seg_num +#ifndef CONF_SLCD_CHAR11_SEG_NUM +#define CONF_SLCD_CHAR11_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character11 +// <id> slcd_arch_char11_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR11_MAPPING_TABLE +#define CONF_SLCD_CHAR11_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 12 Mapping Setting +// <id> slcd_arch_char12_setting +#ifndef CONF_SLCD_CHAR12_ENABLE_SETTING +#define CONF_SLCD_CHAR12_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character12 COM begin index +// <id> slcd_arch_char12_com_idx +#ifndef CONF_SLCD_CHAR12_COM_IDX +#define CONF_SLCD_CHAR12_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character12 Segment begin index +// <id> slcd_arch_char12_seg_idx +#ifndef CONF_SLCD_CHAR12_SEG_IDX +#define CONF_SLCD_CHAR12_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character12 mapping +// <id> slcd_arch_char12_seg_num +#ifndef CONF_SLCD_CHAR12_SEG_NUM +#define CONF_SLCD_CHAR12_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character12 +// <id> slcd_arch_char12_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR12_MAPPING_TABLE +#define CONF_SLCD_CHAR12_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 13 Mapping Setting +// <id> slcd_arch_char13_setting +#ifndef CONF_SLCD_CHAR13_ENABLE_SETTING +#define CONF_SLCD_CHAR13_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character13 COM begin index +// <id> slcd_arch_char13_com_idx +#ifndef CONF_SLCD_CHAR13_COM_IDX +#define CONF_SLCD_CHAR13_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character13 Segment begin index +// <id> slcd_arch_char13_seg_idx +#ifndef CONF_SLCD_CHAR13_SEG_IDX +#define CONF_SLCD_CHAR13_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character13 mapping +// <id> slcd_arch_char13_seg_num +#ifndef CONF_SLCD_CHAR13_SEG_NUM +#define CONF_SLCD_CHAR13_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character13 +// <id> slcd_arch_char13_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR13_MAPPING_TABLE +#define CONF_SLCD_CHAR13_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 14 Mapping Setting +// <id> slcd_arch_char14_setting +#ifndef CONF_SLCD_CHAR14_ENABLE_SETTING +#define CONF_SLCD_CHAR14_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character14 COM begin index +// <id> slcd_arch_char14_com_idx +#ifndef CONF_SLCD_CHAR14_COM_IDX +#define CONF_SLCD_CHAR14_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character14 Segment begin index +// <id> slcd_arch_char14_seg_idx +#ifndef CONF_SLCD_CHAR14_SEG_IDX +#define CONF_SLCD_CHAR14_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character14 mapping +// <id> slcd_arch_char14_seg_num +#ifndef CONF_SLCD_CHAR14_SEG_NUM +#define CONF_SLCD_CHAR14_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character14 +// <id> slcd_arch_char14_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR14_MAPPING_TABLE +#define CONF_SLCD_CHAR14_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 15 Mapping Setting +// <id> slcd_arch_char15_setting +#ifndef CONF_SLCD_CHAR15_ENABLE_SETTING +#define CONF_SLCD_CHAR15_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character15 COM begin index +// <id> slcd_arch_char15_com_idx +#ifndef CONF_SLCD_CHAR15_COM_IDX +#define CONF_SLCD_CHAR15_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character15 Segment begin index +// <id> slcd_arch_char15_seg_idx +#ifndef CONF_SLCD_CHAR15_SEG_IDX +#define CONF_SLCD_CHAR15_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character15 mapping +// <id> slcd_arch_char15_seg_num +#ifndef CONF_SLCD_CHAR15_SEG_NUM +#define CONF_SLCD_CHAR15_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character15 +// <id> slcd_arch_char15_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR15_MAPPING_TABLE +#define CONF_SLCD_CHAR15_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 16 Mapping Setting +// <id> slcd_arch_char16_setting +#ifndef CONF_SLCD_CHAR16_ENABLE_SETTING +#define CONF_SLCD_CHAR16_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character16 COM begin index +// <id> slcd_arch_char16_com_idx +#ifndef CONF_SLCD_CHAR16_COM_IDX +#define CONF_SLCD_CHAR16_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character16 Segment begin index +// <id> slcd_arch_char16_seg_idx +#ifndef CONF_SLCD_CHAR16_SEG_IDX +#define CONF_SLCD_CHAR16_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character16 mapping +// <id> slcd_arch_char16_seg_num +#ifndef CONF_SLCD_CHAR16_SEG_NUM +#define CONF_SLCD_CHAR16_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character16 +// <id> slcd_arch_char16_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR16_MAPPING_TABLE +#define CONF_SLCD_CHAR16_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 17 Mapping Setting +// <id> slcd_arch_char17_setting +#ifndef CONF_SLCD_CHAR17_ENABLE_SETTING +#define CONF_SLCD_CHAR17_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character17 COM begin index +// <id> slcd_arch_char17_com_idx +#ifndef CONF_SLCD_CHAR17_COM_IDX +#define CONF_SLCD_CHAR17_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character17 Segment begin index +// <id> slcd_arch_char17_seg_idx +#ifndef CONF_SLCD_CHAR17_SEG_IDX +#define CONF_SLCD_CHAR17_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character17 mapping +// <id> slcd_arch_char17_seg_num +#ifndef CONF_SLCD_CHAR17_SEG_NUM +#define CONF_SLCD_CHAR17_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character17 +// <id> slcd_arch_char17_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR17_MAPPING_TABLE +#define CONF_SLCD_CHAR17_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 18 Mapping Setting +// <id> slcd_arch_char18_setting +#ifndef CONF_SLCD_CHAR18_ENABLE_SETTING +#define CONF_SLCD_CHAR18_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character18 COM begin index +// <id> slcd_arch_char18_com_idx +#ifndef CONF_SLCD_CHAR18_COM_IDX +#define CONF_SLCD_CHAR18_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character18 Segment begin index +// <id> slcd_arch_char18_seg_idx +#ifndef CONF_SLCD_CHAR18_SEG_IDX +#define CONF_SLCD_CHAR18_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character18 mapping +// <id> slcd_arch_char18_seg_num +#ifndef CONF_SLCD_CHAR18_SEG_NUM +#define CONF_SLCD_CHAR18_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character18 +// <id> slcd_arch_char18_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR18_MAPPING_TABLE +#define CONF_SLCD_CHAR18_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 19 Mapping Setting +// <id> slcd_arch_char19_setting +#ifndef CONF_SLCD_CHAR19_ENABLE_SETTING +#define CONF_SLCD_CHAR19_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character19 COM begin index +// <id> slcd_arch_char19_com_idx +#ifndef CONF_SLCD_CHAR19_COM_IDX +#define CONF_SLCD_CHAR19_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character19 Segment begin index +// <id> slcd_arch_char19_seg_idx +#ifndef CONF_SLCD_CHAR19_SEG_IDX +#define CONF_SLCD_CHAR19_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character19 mapping +// <id> slcd_arch_char19_seg_num +#ifndef CONF_SLCD_CHAR19_SEG_NUM +#define CONF_SLCD_CHAR19_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character19 +// <id> slcd_arch_char19_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR19_MAPPING_TABLE +#define CONF_SLCD_CHAR19_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 20 Mapping Setting +// <id> slcd_arch_char20_setting +#ifndef CONF_SLCD_CHAR20_ENABLE_SETTING +#define CONF_SLCD_CHAR20_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character20 COM begin index +// <id> slcd_arch_char20_com_idx +#ifndef CONF_SLCD_CHAR20_COM_IDX +#define CONF_SLCD_CHAR20_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character20 Segment begin index +// <id> slcd_arch_char20_seg_idx +#ifndef CONF_SLCD_CHAR20_SEG_IDX +#define CONF_SLCD_CHAR20_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character20 mapping +// <id> slcd_arch_char20_seg_num +#ifndef CONF_SLCD_CHAR20_SEG_NUM +#define CONF_SLCD_CHAR20_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character20 +// <id> slcd_arch_char20_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR20_MAPPING_TABLE +#define CONF_SLCD_CHAR20_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 21 Mapping Setting +// <id> slcd_arch_char21_setting +#ifndef CONF_SLCD_CHAR21_ENABLE_SETTING +#define CONF_SLCD_CHAR21_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character21 COM begin index +// <id> slcd_arch_char21_com_idx +#ifndef CONF_SLCD_CHAR21_COM_IDX +#define CONF_SLCD_CHAR21_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character21 Segment begin index +// <id> slcd_arch_char21_seg_idx +#ifndef CONF_SLCD_CHAR21_SEG_IDX +#define CONF_SLCD_CHAR21_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character21 mapping +// <id> slcd_arch_char21_seg_num +#ifndef CONF_SLCD_CHAR21_SEG_NUM +#define CONF_SLCD_CHAR21_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character21 +// <id> slcd_arch_char21_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR21_MAPPING_TABLE +#define CONF_SLCD_CHAR21_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 22 Mapping Setting +// <id> slcd_arch_char22_setting +#ifndef CONF_SLCD_CHAR22_ENABLE_SETTING +#define CONF_SLCD_CHAR22_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character22 COM begin index +// <id> slcd_arch_char22_com_idx +#ifndef CONF_SLCD_CHAR22_COM_IDX +#define CONF_SLCD_CHAR22_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character22 Segment begin index +// <id> slcd_arch_char22_seg_idx +#ifndef CONF_SLCD_CHAR22_SEG_IDX +#define CONF_SLCD_CHAR22_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character22 mapping +// <id> slcd_arch_char22_seg_num +#ifndef CONF_SLCD_CHAR22_SEG_NUM +#define CONF_SLCD_CHAR22_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character22 +// <id> slcd_arch_char22_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR22_MAPPING_TABLE +#define CONF_SLCD_CHAR22_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 23 Mapping Setting +// <id> slcd_arch_char23_setting +#ifndef CONF_SLCD_CHAR23_ENABLE_SETTING +#define CONF_SLCD_CHAR23_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character23 COM begin index +// <id> slcd_arch_char23_com_idx +#ifndef CONF_SLCD_CHAR23_COM_IDX +#define CONF_SLCD_CHAR23_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character23 Segment begin index +// <id> slcd_arch_char23_seg_idx +#ifndef CONF_SLCD_CHAR23_SEG_IDX +#define CONF_SLCD_CHAR23_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character23 mapping +// <id> slcd_arch_char23_seg_num +#ifndef CONF_SLCD_CHAR23_SEG_NUM +#define CONF_SLCD_CHAR23_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character23 +// <id> slcd_arch_char23_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR23_MAPPING_TABLE +#define CONF_SLCD_CHAR23_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 24 Mapping Setting +// <id> slcd_arch_char24_setting +#ifndef CONF_SLCD_CHAR24_ENABLE_SETTING +#define CONF_SLCD_CHAR24_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character24 COM begin index +// <id> slcd_arch_char24_com_idx +#ifndef CONF_SLCD_CHAR24_COM_IDX +#define CONF_SLCD_CHAR24_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character24 Segment begin index +// <id> slcd_arch_char24_seg_idx +#ifndef CONF_SLCD_CHAR24_SEG_IDX +#define CONF_SLCD_CHAR24_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character24 mapping +// <id> slcd_arch_char24_seg_num +#ifndef CONF_SLCD_CHAR24_SEG_NUM +#define CONF_SLCD_CHAR24_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character24 +// <id> slcd_arch_char24_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR24_MAPPING_TABLE +#define CONF_SLCD_CHAR24_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 25 Mapping Setting +// <id> slcd_arch_char25_setting +#ifndef CONF_SLCD_CHAR25_ENABLE_SETTING +#define CONF_SLCD_CHAR25_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character25 COM begin index +// <id> slcd_arch_char25_com_idx +#ifndef CONF_SLCD_CHAR25_COM_IDX +#define CONF_SLCD_CHAR25_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character25 Segment begin index +// <id> slcd_arch_char25_seg_idx +#ifndef CONF_SLCD_CHAR25_SEG_IDX +#define CONF_SLCD_CHAR25_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character25 mapping +// <id> slcd_arch_char25_seg_num +#ifndef CONF_SLCD_CHAR25_SEG_NUM +#define CONF_SLCD_CHAR25_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character25 +// <id> slcd_arch_char25_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR25_MAPPING_TABLE +#define CONF_SLCD_CHAR25_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 26 Mapping Setting +// <id> slcd_arch_char26_setting +#ifndef CONF_SLCD_CHAR26_ENABLE_SETTING +#define CONF_SLCD_CHAR26_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character26 COM begin index +// <id> slcd_arch_char26_com_idx +#ifndef CONF_SLCD_CHAR26_COM_IDX +#define CONF_SLCD_CHAR26_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character26 Segment begin index +// <id> slcd_arch_char26_seg_idx +#ifndef CONF_SLCD_CHAR26_SEG_IDX +#define CONF_SLCD_CHAR26_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character26 mapping +// <id> slcd_arch_char26_seg_num +#ifndef CONF_SLCD_CHAR26_SEG_NUM +#define CONF_SLCD_CHAR26_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character26 +// <id> slcd_arch_char26_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR26_MAPPING_TABLE +#define CONF_SLCD_CHAR26_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 27 Mapping Setting +// <id> slcd_arch_char27_setting +#ifndef CONF_SLCD_CHAR27_ENABLE_SETTING +#define CONF_SLCD_CHAR27_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character27 COM begin index +// <id> slcd_arch_char27_com_idx +#ifndef CONF_SLCD_CHAR27_COM_IDX +#define CONF_SLCD_CHAR27_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character27 Segment begin index +// <id> slcd_arch_char27_seg_idx +#ifndef CONF_SLCD_CHAR27_SEG_IDX +#define CONF_SLCD_CHAR27_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character27 mapping +// <id> slcd_arch_char27_seg_num +#ifndef CONF_SLCD_CHAR27_SEG_NUM +#define CONF_SLCD_CHAR27_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character27 +// <id> slcd_arch_char27_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR27_MAPPING_TABLE +#define CONF_SLCD_CHAR27_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 28 Mapping Setting +// <id> slcd_arch_char28_setting +#ifndef CONF_SLCD_CHAR28_ENABLE_SETTING +#define CONF_SLCD_CHAR28_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character28 COM begin index +// <id> slcd_arch_char28_com_idx +#ifndef CONF_SLCD_CHAR28_COM_IDX +#define CONF_SLCD_CHAR28_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character28 Segment begin index +// <id> slcd_arch_char28_seg_idx +#ifndef CONF_SLCD_CHAR28_SEG_IDX +#define CONF_SLCD_CHAR28_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character28 mapping +// <id> slcd_arch_char28_seg_num +#ifndef CONF_SLCD_CHAR28_SEG_NUM +#define CONF_SLCD_CHAR28_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character28 +// <id> slcd_arch_char28_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR28_MAPPING_TABLE +#define CONF_SLCD_CHAR28_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 29 Mapping Setting +// <id> slcd_arch_char29_setting +#ifndef CONF_SLCD_CHAR29_ENABLE_SETTING +#define CONF_SLCD_CHAR29_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character29 COM begin index +// <id> slcd_arch_char29_com_idx +#ifndef CONF_SLCD_CHAR29_COM_IDX +#define CONF_SLCD_CHAR29_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character29 Segment begin index +// <id> slcd_arch_char29_seg_idx +#ifndef CONF_SLCD_CHAR29_SEG_IDX +#define CONF_SLCD_CHAR29_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character29 mapping +// <id> slcd_arch_char29_seg_num +#ifndef CONF_SLCD_CHAR29_SEG_NUM +#define CONF_SLCD_CHAR29_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character29 +// <id> slcd_arch_char29_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR29_MAPPING_TABLE +#define CONF_SLCD_CHAR29_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 30 Mapping Setting +// <id> slcd_arch_char30_setting +#ifndef CONF_SLCD_CHAR30_ENABLE_SETTING +#define CONF_SLCD_CHAR30_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character30 COM begin index +// <id> slcd_arch_char30_com_idx +#ifndef CONF_SLCD_CHAR30_COM_IDX +#define CONF_SLCD_CHAR30_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character30 Segment begin index +// <id> slcd_arch_char30_seg_idx +#ifndef CONF_SLCD_CHAR30_SEG_IDX +#define CONF_SLCD_CHAR30_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character30 mapping +// <id> slcd_arch_char30_seg_num +#ifndef CONF_SLCD_CHAR30_SEG_NUM +#define CONF_SLCD_CHAR30_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character30 +// <id> slcd_arch_char30_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR30_MAPPING_TABLE +#define CONF_SLCD_CHAR30_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 31 Mapping Setting +// <id> slcd_arch_char31_setting +#ifndef CONF_SLCD_CHAR31_ENABLE_SETTING +#define CONF_SLCD_CHAR31_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character31 COM begin index +// <id> slcd_arch_char31_com_idx +#ifndef CONF_SLCD_CHAR31_COM_IDX +#define CONF_SLCD_CHAR31_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character31 Segment begin index +// <id> slcd_arch_char31_seg_idx +#ifndef CONF_SLCD_CHAR31_SEG_IDX +#define CONF_SLCD_CHAR31_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character31 mapping +// <id> slcd_arch_char31_seg_num +#ifndef CONF_SLCD_CHAR31_SEG_NUM +#define CONF_SLCD_CHAR31_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character31 +// <id> slcd_arch_char31_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR31_MAPPING_TABLE +#define CONF_SLCD_CHAR31_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 32 Mapping Setting +// <id> slcd_arch_char32_setting +#ifndef CONF_SLCD_CHAR32_ENABLE_SETTING +#define CONF_SLCD_CHAR32_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character32 COM begin index +// <id> slcd_arch_char32_com_idx +#ifndef CONF_SLCD_CHAR32_COM_IDX +#define CONF_SLCD_CHAR32_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character32 Segment begin index +// <id> slcd_arch_char32_seg_idx +#ifndef CONF_SLCD_CHAR32_SEG_IDX +#define CONF_SLCD_CHAR32_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character32 mapping +// <id> slcd_arch_char32_seg_num +#ifndef CONF_SLCD_CHAR32_SEG_NUM +#define CONF_SLCD_CHAR32_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character32 +// <id> slcd_arch_char32_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR32_MAPPING_TABLE +#define CONF_SLCD_CHAR32_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 33 Mapping Setting +// <id> slcd_arch_char33_setting +#ifndef CONF_SLCD_CHAR33_ENABLE_SETTING +#define CONF_SLCD_CHAR33_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character33 COM begin index +// <id> slcd_arch_char33_com_idx +#ifndef CONF_SLCD_CHAR33_COM_IDX +#define CONF_SLCD_CHAR33_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character33 Segment begin index +// <id> slcd_arch_char33_seg_idx +#ifndef CONF_SLCD_CHAR33_SEG_IDX +#define CONF_SLCD_CHAR33_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character33 mapping +// <id> slcd_arch_char33_seg_num +#ifndef CONF_SLCD_CHAR33_SEG_NUM +#define CONF_SLCD_CHAR33_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character33 +// <id> slcd_arch_char33_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR33_MAPPING_TABLE +#define CONF_SLCD_CHAR33_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 34 Mapping Setting +// <id> slcd_arch_char34_setting +#ifndef CONF_SLCD_CHAR34_ENABLE_SETTING +#define CONF_SLCD_CHAR34_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character34 COM begin index +// <id> slcd_arch_char34_com_idx +#ifndef CONF_SLCD_CHAR34_COM_IDX +#define CONF_SLCD_CHAR34_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character34 Segment begin index +// <id> slcd_arch_char34_seg_idx +#ifndef CONF_SLCD_CHAR34_SEG_IDX +#define CONF_SLCD_CHAR34_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character34 mapping +// <id> slcd_arch_char34_seg_num +#ifndef CONF_SLCD_CHAR34_SEG_NUM +#define CONF_SLCD_CHAR34_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character34 +// <id> slcd_arch_char34_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR34_MAPPING_TABLE +#define CONF_SLCD_CHAR34_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 35 Mapping Setting +// <id> slcd_arch_char35_setting +#ifndef CONF_SLCD_CHAR35_ENABLE_SETTING +#define CONF_SLCD_CHAR35_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character35 COM begin index +// <id> slcd_arch_char35_com_idx +#ifndef CONF_SLCD_CHAR35_COM_IDX +#define CONF_SLCD_CHAR35_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character35 Segment begin index +// <id> slcd_arch_char35_seg_idx +#ifndef CONF_SLCD_CHAR35_SEG_IDX +#define CONF_SLCD_CHAR35_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character35 mapping +// <id> slcd_arch_char35_seg_num +#ifndef CONF_SLCD_CHAR35_SEG_NUM +#define CONF_SLCD_CHAR35_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character35 +// <id> slcd_arch_char35_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR35_MAPPING_TABLE +#define CONF_SLCD_CHAR35_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 36 Mapping Setting +// <id> slcd_arch_char36_setting +#ifndef CONF_SLCD_CHAR36_ENABLE_SETTING +#define CONF_SLCD_CHAR36_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character36 COM begin index +// <id> slcd_arch_char36_com_idx +#ifndef CONF_SLCD_CHAR36_COM_IDX +#define CONF_SLCD_CHAR36_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character36 Segment begin index +// <id> slcd_arch_char36_seg_idx +#ifndef CONF_SLCD_CHAR36_SEG_IDX +#define CONF_SLCD_CHAR36_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character36 mapping +// <id> slcd_arch_char36_seg_num +#ifndef CONF_SLCD_CHAR36_SEG_NUM +#define CONF_SLCD_CHAR36_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character36 +// <id> slcd_arch_char36_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR36_MAPPING_TABLE +#define CONF_SLCD_CHAR36_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 37 Mapping Setting +// <id> slcd_arch_char37_setting +#ifndef CONF_SLCD_CHAR37_ENABLE_SETTING +#define CONF_SLCD_CHAR37_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character37 COM begin index +// <id> slcd_arch_char37_com_idx +#ifndef CONF_SLCD_CHAR37_COM_IDX +#define CONF_SLCD_CHAR37_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character37 Segment begin index +// <id> slcd_arch_char37_seg_idx +#ifndef CONF_SLCD_CHAR37_SEG_IDX +#define CONF_SLCD_CHAR37_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character37 mapping +// <id> slcd_arch_char37_seg_num +#ifndef CONF_SLCD_CHAR37_SEG_NUM +#define CONF_SLCD_CHAR37_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character37 +// <id> slcd_arch_char37_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR37_MAPPING_TABLE +#define CONF_SLCD_CHAR37_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 38 Mapping Setting +// <id> slcd_arch_char38_setting +#ifndef CONF_SLCD_CHAR38_ENABLE_SETTING +#define CONF_SLCD_CHAR38_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character38 COM begin index +// <id> slcd_arch_char38_com_idx +#ifndef CONF_SLCD_CHAR38_COM_IDX +#define CONF_SLCD_CHAR38_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character38 Segment begin index +// <id> slcd_arch_char38_seg_idx +#ifndef CONF_SLCD_CHAR38_SEG_IDX +#define CONF_SLCD_CHAR38_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character38 mapping +// <id> slcd_arch_char38_seg_num +#ifndef CONF_SLCD_CHAR38_SEG_NUM +#define CONF_SLCD_CHAR38_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character38 +// <id> slcd_arch_char38_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR38_MAPPING_TABLE +#define CONF_SLCD_CHAR38_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 39 Mapping Setting +// <id> slcd_arch_char39_setting +#ifndef CONF_SLCD_CHAR39_ENABLE_SETTING +#define CONF_SLCD_CHAR39_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character39 COM begin index +// <id> slcd_arch_char39_com_idx +#ifndef CONF_SLCD_CHAR39_COM_IDX +#define CONF_SLCD_CHAR39_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character39 Segment begin index +// <id> slcd_arch_char39_seg_idx +#ifndef CONF_SLCD_CHAR39_SEG_IDX +#define CONF_SLCD_CHAR39_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character39 mapping +// <id> slcd_arch_char39_seg_num +#ifndef CONF_SLCD_CHAR39_SEG_NUM +#define CONF_SLCD_CHAR39_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character39 +// <id> slcd_arch_char39_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR39_MAPPING_TABLE +#define CONF_SLCD_CHAR39_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 40 Mapping Setting +// <id> slcd_arch_char40_setting +#ifndef CONF_SLCD_CHAR40_ENABLE_SETTING +#define CONF_SLCD_CHAR40_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character40 COM begin index +// <id> slcd_arch_char40_com_idx +#ifndef CONF_SLCD_CHAR40_COM_IDX +#define CONF_SLCD_CHAR40_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character40 Segment begin index +// <id> slcd_arch_char40_seg_idx +#ifndef CONF_SLCD_CHAR40_SEG_IDX +#define CONF_SLCD_CHAR40_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character40 mapping +// <id> slcd_arch_char40_seg_num +#ifndef CONF_SLCD_CHAR40_SEG_NUM +#define CONF_SLCD_CHAR40_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character40 +// <id> slcd_arch_char40_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR40_MAPPING_TABLE +#define CONF_SLCD_CHAR40_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 41 Mapping Setting +// <id> slcd_arch_char41_setting +#ifndef CONF_SLCD_CHAR41_ENABLE_SETTING +#define CONF_SLCD_CHAR41_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character41 COM begin index +// <id> slcd_arch_char41_com_idx +#ifndef CONF_SLCD_CHAR41_COM_IDX +#define CONF_SLCD_CHAR41_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character41 Segment begin index +// <id> slcd_arch_char41_seg_idx +#ifndef CONF_SLCD_CHAR41_SEG_IDX +#define CONF_SLCD_CHAR41_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character41 mapping +// <id> slcd_arch_char41_seg_num +#ifndef CONF_SLCD_CHAR41_SEG_NUM +#define CONF_SLCD_CHAR41_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character41 +// <id> slcd_arch_char41_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR41_MAPPING_TABLE +#define CONF_SLCD_CHAR41_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 42 Mapping Setting +// <id> slcd_arch_char42_setting +#ifndef CONF_SLCD_CHAR42_ENABLE_SETTING +#define CONF_SLCD_CHAR42_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character42 COM begin index +// <id> slcd_arch_char42_com_idx +#ifndef CONF_SLCD_CHAR42_COM_IDX +#define CONF_SLCD_CHAR42_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character42 Segment begin index +// <id> slcd_arch_char42_seg_idx +#ifndef CONF_SLCD_CHAR42_SEG_IDX +#define CONF_SLCD_CHAR42_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character42 mapping +// <id> slcd_arch_char42_seg_num +#ifndef CONF_SLCD_CHAR42_SEG_NUM +#define CONF_SLCD_CHAR42_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character42 +// <id> slcd_arch_char42_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR42_MAPPING_TABLE +#define CONF_SLCD_CHAR42_MAPPING_SIZE 7 +#endif + +// </e> + +// <e> Character 43 Mapping Setting +// <id> slcd_arch_char43_setting +#ifndef CONF_SLCD_CHAR43_ENABLE_SETTING +#define CONF_SLCD_CHAR43_ENABLE_SETTING 0 +#endif + +// <o> COM index <0-7> +// <i> Character43 COM begin index +// <id> slcd_arch_char43_com_idx +#ifndef CONF_SLCD_CHAR43_COM_IDX +#define CONF_SLCD_CHAR43_COM_IDX 0 +#endif + +// <o> Segment index <0-44> +// <i> Character43 Segment begin index +// <id> slcd_arch_char43_seg_idx +#ifndef CONF_SLCD_CHAR43_SEG_IDX +#define CONF_SLCD_CHAR43_SEG_IDX 1 +#endif + +// <o> Number of Segment <1-24> +// <i> Number of Segment used for Character43 mapping +// <id> slcd_arch_char43_seg_num +#ifndef CONF_SLCD_CHAR43_SEG_NUM +#define CONF_SLCD_CHAR43_SEG_NUM 1 +#endif + +// <o> Mapping Table +// <i> Select the char mapping table for Character43 +// <id> slcd_arch_char43_mapping_table +// <7=>7 Segments Mapping Table +// <14=>14 Segments Mapping Table +#ifndef CONF_SLCD_CHAR43_MAPPING_TABLE +#define CONF_SLCD_CHAR43_MAPPING_SIZE 7 +#endif + +// </e> + +/** + * character lookup table + */ +#define SLCD_CHAR_SETTING_TABLE \ + { \ + {CONF_SLCD_CHAR0_COM_IDX, CONF_SLCD_CHAR0_SEG_IDX, CONF_SLCD_CHAR0_SEG_NUM - 1, CONF_SLCD_CHAR0_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR1_COM_IDX, \ + CONF_SLCD_CHAR1_SEG_IDX, \ + CONF_SLCD_CHAR1_SEG_NUM - 1, \ + CONF_SLCD_CHAR1_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR2_COM_IDX, \ + CONF_SLCD_CHAR2_SEG_IDX, \ + CONF_SLCD_CHAR2_SEG_NUM - 1, \ + CONF_SLCD_CHAR2_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR3_COM_IDX, \ + CONF_SLCD_CHAR3_SEG_IDX, \ + CONF_SLCD_CHAR3_SEG_NUM - 1, \ + CONF_SLCD_CHAR3_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR4_COM_IDX, \ + CONF_SLCD_CHAR4_SEG_IDX, \ + CONF_SLCD_CHAR4_SEG_NUM - 1, \ + CONF_SLCD_CHAR4_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR5_COM_IDX, \ + CONF_SLCD_CHAR5_SEG_IDX, \ + CONF_SLCD_CHAR5_SEG_NUM - 1, \ + CONF_SLCD_CHAR5_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR6_COM_IDX, \ + CONF_SLCD_CHAR6_SEG_IDX, \ + CONF_SLCD_CHAR6_SEG_NUM - 1, \ + CONF_SLCD_CHAR6_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR7_COM_IDX, \ + CONF_SLCD_CHAR7_SEG_IDX, \ + CONF_SLCD_CHAR7_SEG_NUM - 1, \ + CONF_SLCD_CHAR7_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR8_COM_IDX, \ + CONF_SLCD_CHAR8_SEG_IDX, \ + CONF_SLCD_CHAR8_SEG_NUM - 1, \ + CONF_SLCD_CHAR8_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR9_COM_IDX, \ + CONF_SLCD_CHAR9_SEG_IDX, \ + CONF_SLCD_CHAR9_SEG_NUM - 1, \ + CONF_SLCD_CHAR9_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR10_COM_IDX, \ + CONF_SLCD_CHAR10_SEG_IDX, \ + CONF_SLCD_CHAR10_SEG_NUM - 1, \ + CONF_SLCD_CHAR10_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR11_COM_IDX, \ + CONF_SLCD_CHAR11_SEG_IDX, \ + CONF_SLCD_CHAR11_SEG_NUM - 1, \ + CONF_SLCD_CHAR11_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR12_COM_IDX, \ + CONF_SLCD_CHAR12_SEG_IDX, \ + CONF_SLCD_CHAR12_SEG_NUM - 1, \ + CONF_SLCD_CHAR12_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR13_COM_IDX, \ + CONF_SLCD_CHAR13_SEG_IDX, \ + CONF_SLCD_CHAR13_SEG_NUM - 1, \ + CONF_SLCD_CHAR13_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR14_COM_IDX, \ + CONF_SLCD_CHAR14_SEG_IDX, \ + CONF_SLCD_CHAR14_SEG_NUM - 1, \ + CONF_SLCD_CHAR14_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR15_COM_IDX, \ + CONF_SLCD_CHAR15_SEG_IDX, \ + CONF_SLCD_CHAR15_SEG_NUM - 1, \ + CONF_SLCD_CHAR15_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR16_COM_IDX, \ + CONF_SLCD_CHAR16_SEG_IDX, \ + CONF_SLCD_CHAR16_SEG_NUM - 1, \ + CONF_SLCD_CHAR16_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR17_COM_IDX, \ + CONF_SLCD_CHAR17_SEG_IDX, \ + CONF_SLCD_CHAR17_SEG_NUM - 1, \ + CONF_SLCD_CHAR17_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR18_COM_IDX, \ + CONF_SLCD_CHAR18_SEG_IDX, \ + CONF_SLCD_CHAR18_SEG_NUM - 1, \ + CONF_SLCD_CHAR18_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR19_COM_IDX, \ + CONF_SLCD_CHAR19_SEG_IDX, \ + CONF_SLCD_CHAR19_SEG_NUM - 1, \ + CONF_SLCD_CHAR19_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR20_COM_IDX, \ + CONF_SLCD_CHAR20_SEG_IDX, \ + CONF_SLCD_CHAR20_SEG_NUM - 1, \ + CONF_SLCD_CHAR20_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR21_COM_IDX, \ + CONF_SLCD_CHAR21_SEG_IDX, \ + CONF_SLCD_CHAR21_SEG_NUM - 1, \ + CONF_SLCD_CHAR21_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR22_COM_IDX, \ + CONF_SLCD_CHAR22_SEG_IDX, \ + CONF_SLCD_CHAR22_SEG_NUM - 1, \ + CONF_SLCD_CHAR22_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR23_COM_IDX, \ + CONF_SLCD_CHAR23_SEG_IDX, \ + CONF_SLCD_CHAR23_SEG_NUM - 1, \ + CONF_SLCD_CHAR23_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR24_COM_IDX, \ + CONF_SLCD_CHAR24_SEG_IDX, \ + CONF_SLCD_CHAR24_SEG_NUM - 1, \ + CONF_SLCD_CHAR24_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR25_COM_IDX, \ + CONF_SLCD_CHAR25_SEG_IDX, \ + CONF_SLCD_CHAR25_SEG_NUM - 1, \ + CONF_SLCD_CHAR25_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR26_COM_IDX, \ + CONF_SLCD_CHAR26_SEG_IDX, \ + CONF_SLCD_CHAR26_SEG_NUM - 1, \ + CONF_SLCD_CHAR26_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR27_COM_IDX, \ + CONF_SLCD_CHAR27_SEG_IDX, \ + CONF_SLCD_CHAR27_SEG_NUM - 1, \ + CONF_SLCD_CHAR27_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR28_COM_IDX, \ + CONF_SLCD_CHAR28_SEG_IDX, \ + CONF_SLCD_CHAR28_SEG_NUM - 1, \ + CONF_SLCD_CHAR28_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR29_COM_IDX, \ + CONF_SLCD_CHAR29_SEG_IDX, \ + CONF_SLCD_CHAR29_SEG_NUM - 1, \ + CONF_SLCD_CHAR29_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR30_COM_IDX, \ + CONF_SLCD_CHAR30_SEG_IDX, \ + CONF_SLCD_CHAR30_SEG_NUM - 1, \ + CONF_SLCD_CHAR30_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR31_COM_IDX, \ + CONF_SLCD_CHAR31_SEG_IDX, \ + CONF_SLCD_CHAR31_SEG_NUM - 1, \ + CONF_SLCD_CHAR31_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR32_COM_IDX, \ + CONF_SLCD_CHAR32_SEG_IDX, \ + CONF_SLCD_CHAR32_SEG_NUM - 1, \ + CONF_SLCD_CHAR32_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR33_COM_IDX, \ + CONF_SLCD_CHAR33_SEG_IDX, \ + CONF_SLCD_CHAR33_SEG_NUM - 1, \ + CONF_SLCD_CHAR33_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR34_COM_IDX, \ + CONF_SLCD_CHAR34_SEG_IDX, \ + CONF_SLCD_CHAR34_SEG_NUM - 1, \ + CONF_SLCD_CHAR34_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR35_COM_IDX, \ + CONF_SLCD_CHAR35_SEG_IDX, \ + CONF_SLCD_CHAR35_SEG_NUM - 1, \ + CONF_SLCD_CHAR35_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR36_COM_IDX, \ + CONF_SLCD_CHAR36_SEG_IDX, \ + CONF_SLCD_CHAR36_SEG_NUM - 1, \ + CONF_SLCD_CHAR36_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR37_COM_IDX, \ + CONF_SLCD_CHAR37_SEG_IDX, \ + CONF_SLCD_CHAR37_SEG_NUM - 1, \ + CONF_SLCD_CHAR37_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR38_COM_IDX, \ + CONF_SLCD_CHAR38_SEG_IDX, \ + CONF_SLCD_CHAR38_SEG_NUM - 1, \ + CONF_SLCD_CHAR38_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR39_COM_IDX, \ + CONF_SLCD_CHAR39_SEG_IDX, \ + CONF_SLCD_CHAR39_SEG_NUM - 1, \ + CONF_SLCD_CHAR39_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR40_COM_IDX, \ + CONF_SLCD_CHAR40_SEG_IDX, \ + CONF_SLCD_CHAR40_SEG_NUM - 1, \ + CONF_SLCD_CHAR40_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR41_COM_IDX, \ + CONF_SLCD_CHAR41_SEG_IDX, \ + CONF_SLCD_CHAR41_SEG_NUM - 1, \ + CONF_SLCD_CHAR41_MAPPING_SIZE}, \ + {CONF_SLCD_CHAR42_COM_IDX, \ + CONF_SLCD_CHAR42_SEG_IDX, \ + CONF_SLCD_CHAR42_SEG_NUM - 1, \ + CONF_SLCD_CHAR42_MAPPING_SIZE}, \ + { \ + CONF_SLCD_CHAR43_COM_IDX, CONF_SLCD_CHAR43_SEG_IDX, CONF_SLCD_CHAR43_SEG_NUM - 1, \ + CONF_SLCD_CHAR43_MAPPING_SIZE \ + } \ + } + +#define CONF_SLCD_LPENL \ + ((uint32_t)1 << 0 | (uint32_t)1 << 1 | (uint32_t)1 << 2 | (uint32_t)1 << 3 | (uint32_t)1 << 4 | (uint32_t)1 << 5 \ + | (uint32_t)1 << 6 | (uint32_t)1 << 7 | (uint32_t)1 << 11 | (uint32_t)1 << 12 | (uint32_t)1 << 13 \ + | (uint32_t)1 << 14 | (uint32_t)1 << 21 | (uint32_t)1 << 22 | (uint32_t)1 << 23 | (uint32_t)1 << 24 \ + | (uint32_t)1 << 25 | (uint32_t)1 << 28 | (uint32_t)1 << 29 | (uint32_t)1 << 30 | (uint32_t)1 << 31 | 0) + +#define CONF_SLCD_LPENH \ + ((uint32_t)1 << 0 | (uint32_t)1 << 1 | (uint32_t)1 << 2 | (uint32_t)1 << 3 | (uint32_t)1 << 10 | (uint32_t)1 << 11 \ + | 0) // </e> + +// <<< end of configuration section >>> + +#endif // HPL_SLCD_CONFIG_H |