diff options
Diffstat (limited to 'watch-library/config/hpl_tc_config.h')
| -rw-r--r-- | watch-library/config/hpl_tc_config.h | 206 |
1 files changed, 206 insertions, 0 deletions
diff --git a/watch-library/config/hpl_tc_config.h b/watch-library/config/hpl_tc_config.h new file mode 100644 index 00000000..61e5b1b6 --- /dev/null +++ b/watch-library/config/hpl_tc_config.h @@ -0,0 +1,206 @@ +/* Auto-generated config file hpl_tc_config.h */ +#ifndef HPL_TC_CONFIG_H +#define HPL_TC_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +#include <peripheral_clk_config.h> + +#ifndef CONF_TC3_ENABLE +#define CONF_TC3_ENABLE 1 +#endif + +// <h> Basic settings +// <o> Prescaler +// <0=> No division +// <1=> Divide by 2 +// <2=> Divide by 4 +// <3=> Divide by 8 +// <4=> Divide by 16 +// <5=> Divide by 64 +// <6=> Divide by 256 +// <7=> Divide by 1024 +// <i> This defines the prescaler value +// <id> tc_prescaler +#ifndef CONF_TC3_PRESCALER +#define CONF_TC3_PRESCALER 0 +#endif +// </h> + +// <h> PWM Waveform Output settings +// <o> Waveform Period Value (uS) <0x00-0xFFFFFFFF> +// <i> The unit of this value is us. +// <id> tc_arch_wave_per_val +#ifndef CONF_TC3_WAVE_PER_VAL +#define CONF_TC3_WAVE_PER_VAL 0x3e8 +#endif + +// <o> Waveform Duty Value (0.1%) <0x00-0x03E8> +// <i> The unit of this value is 1/1000. +// <id> tc_arch_wave_duty_val +#ifndef CONF_TC3_WAVE_DUTY_VAL +#define CONF_TC3_WAVE_DUTY_VAL 0x1f4 +#endif + +/* Caculate pwm ccx register value based on WAVE_PER_VAL and Waveform Duty Value */ +#if CONF_TC3_PRESCALER < TC_CTRLA_PRESCALER_DIV64_Val +#define CONF_TC3_CC0 \ + ((uint32_t)(((double)CONF_TC3_WAVE_PER_VAL * CONF_GCLK_TC3_FREQUENCY) / 1000000 / (1 << CONF_TC3_PRESCALER) - 1)) +#define CONF_TC3_CC1 ((CONF_TC3_CC0 * CONF_TC3_WAVE_DUTY_VAL) / 1000) + +#elif CONF_TC3_PRESCALER == TC_CTRLA_PRESCALER_DIV64_Val +#define CONF_TC3_CC0 ((uint32_t)(((double)CONF_TC3_WAVE_PER_VAL * CONF_GCLK_TC3_FREQUENCY) / 64000000 - 1)) +#define CONF_TC3_CC1 ((CONF_TC3_CC0 * CONF_TC3_WAVE_DUTY_VAL) / 1000) + +#elif CONF_TC3_PRESCALER == TC_CTRLA_PRESCALER_DIV256_Val +#define CONF_TC3_CC0 ((uint32_t)(((double)CONF_TC3_WAVE_PER_VAL * CONF_GCLK_TC3_FREQUENCY) / 256000000 - 1)) +#define CONF_TC3_CC1 ((CONF_TC3_CC0 * CONF_TC3_WAVE_DUTY_VAL) / 1000) + +#elif CONF_TC3_PRESCALER == TC_CTRLA_PRESCALER_DIV1024_Val +#define CONF_TC3_CC0 ((uint32_t)(((double)CONF_TC3_WAVE_PER_VAL * CONF_GCLK_TC3_FREQUENCY) / 1024000000 - 1)) +#define CONF_TC3_CC1 ((CONF_TC3_CC0 * CONF_TC3_WAVE_DUTY_VAL) / 1000) +#endif + +// </h> + +// <h> Advanced settings +// <y> Mode +// <TC_CTRLA_MODE_COUNT16_Val"> Counter in 16-bit mode +// <TC_CTRLA_MODE_COUNT32_Val"> Counter in 32-bit mode +// <i> These bits mode +// <id> tc_mode +#ifndef CONF_TC3_MODE +#define CONF_TC3_MODE TC_CTRLA_MODE_COUNT16_Val +#endif + +/* Unused in 16/32 bit PWM mode */ +#ifndef CONF_TC3_PER +#define CONF_TC3_PER 0x32 +#endif + +// <y> Prescaler and Counter Synchronization Selection +// <TC_CTRLA_PRESCSYNC_GCLK_Val"> Reload or reset counter on next GCLK +// <TC_CTRLA_PRESCSYNC_PRESC_Val"> Reload or reset counter on next prescaler clock +// <TC_CTRLA_PRESCSYNC_RESYNC_Val"> Reload or reset counter on next GCLK and reset prescaler counter +// <i> These bits select if on retrigger event, the Counter should be cleared or reloaded on the next GCLK_TCx clock or on the next prescaled GCLK_TCx clock. +// <id> tc_arch_presync +#ifndef CONF_TC3_PRESCSYNC +#define CONF_TC3_PRESCSYNC TC_CTRLA_PRESCSYNC_GCLK_Val +#endif + +// <q> Run in standby +// <i> Indicates whether the will continue running in standby sleep mode or not +// <id> tc_arch_runstdby +#ifndef CONF_TC3_RUNSTDBY +#define CONF_TC3_RUNSTDBY 0 +#endif + +// <q> On-Demand +// <i> Indicates whether the TC3's on-demand mode is on or not +// <id> tc_arch_ondemand +#ifndef CONF_TC3_ONDEMAND +#define CONF_TC3_ONDEMAND 0 +#endif + +// <o> Auto Lock +// <0x0=>The Lock Update bit is not affected on overflow/underflow and re-trigger event +// <0x1=>The Lock Update bit is set on each overflow/underflow or re-trigger event +// <id> tc_arch_alock +#ifndef CONF_TC3_ALOCK +#define CONF_TC3_ALOCK 0 +#endif + +/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */ +//#define CONF_TC3_CAPTEN0 0 +//#define CONF_TC3_CAPTEN1 0 +//#define CONF_TC3_COPEN0 0 +//#define CONF_TC3_COPEN1 0 + +/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */ +//#define CONF_TC3_DIR 0 +//#define CONF_TC3_ONESHOT 0 +//#define CONF_TC3_LUPD 0 + +// <q> Debug Running Mode +// <i> Indicates whether the Debug Running Mode is enabled or not +// <id> tc_arch_dbgrun +#ifndef CONF_TC3_DBGRUN +#define CONF_TC3_DBGRUN 0 +#endif + +// <e> Event control +// <id> timer_event_control +#ifndef CONF_TC3_EVENT_CONTROL_ENABLE +#define CONF_TC3_EVENT_CONTROL_ENABLE 0 +#endif + +// <q> Output Event On Match or Capture on Channel 0 +// <i> Enable output of event on timer tick +// <id> tc_arch_mceo0 +#ifndef CONF_TC3_MCEO0 +#define CONF_TC3_MCEO0 0 +#endif + +// <q> Output Event On Match or Capture on Channel 1 +// <i> Enable output of event on timer tick +// <id> tc_arch_mceo1 +#ifndef CONF_TC3_MCEO1 +#define CONF_TC3_MCEO1 0 +#endif + +// <q> Output Event On Timer Tick +// <i> Enable output of event on timer tick +// <id> tc_arch_ovfeo +#ifndef CONF_TC3_OVFEO +#define CONF_TC3_OVFEO 0 +#endif + +// <q> Event Input +// <i> Enable asynchronous input events +// <id> tc_arch_tcei +#ifndef CONF_TC3_TCEI +#define CONF_TC3_TCEI 0 +#endif + +// <q> Inverted Event Input +// <i> Invert the asynchronous input events +// <id> tc_arch_tcinv +#ifndef CONF_TC3_TCINV +#define CONF_TC3_TCINV 0 +#endif + +// <o> Event action +// <0=> Event action disabled +// <1=> Start, restart or re-trigger TC on event +// <2=> Count on event +// <3=> Start on event +// <4=> Time stamp capture +// <5=> Period captured in CC0, pulse width in CC1 +// <6=> Period captured in CC1, pulse width in CC0 +// <7=> Pulse width capture +// <i> Event which will be performed on an event +//<id> tc_arch_evact +#ifndef CONF_TC3_EVACT +#define CONF_TC3_EVACT 0 +#endif +// </e> + +/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */ +//#define CONF_TC3_WAVEGEN TC_CTRLA_WAVEGEN_MFRQ_Val + +/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */ +//#define CONF_TC3_INVEN0 0 +//#define CONF_TC3_INVEN1 0 + +/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */ +//#define CONF_TC3_PERBUF 0 + +/* Commented intentionally. Timer uses fixed value. May be used by other abstractions based on TC. */ +//#define CONF_TC3_CCBUF0 0 +//#define CONF_TC3_CCBUF1 0 + +// </h> + +// <<< end of configuration section >>> + +#endif // HPL_TC_CONFIG_H |