diff options
Diffstat (limited to 'watch-library/hardware/include/instance/dmac.h')
-rw-r--r-- | watch-library/hardware/include/instance/dmac.h | 98 |
1 files changed, 98 insertions, 0 deletions
diff --git a/watch-library/hardware/include/instance/dmac.h b/watch-library/hardware/include/instance/dmac.h new file mode 100644 index 00000000..2b7580d2 --- /dev/null +++ b/watch-library/hardware/include/instance/dmac.h @@ -0,0 +1,98 @@ +/** + * \file + * + * \brief Instance description for DMAC + * + * Copyright (c) 2018 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + +#ifndef _SAML22_DMAC_INSTANCE_ +#define _SAML22_DMAC_INSTANCE_ + +/* ========== Register definition for DMAC peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_DMAC_CTRL (0x41008000) /**< \brief (DMAC) Control */ +#define REG_DMAC_CRCCTRL (0x41008002) /**< \brief (DMAC) CRC Control */ +#define REG_DMAC_CRCDATAIN (0x41008004) /**< \brief (DMAC) CRC Data Input */ +#define REG_DMAC_CRCCHKSUM (0x41008008) /**< \brief (DMAC) CRC Checksum */ +#define REG_DMAC_CRCSTATUS (0x4100800C) /**< \brief (DMAC) CRC Status */ +#define REG_DMAC_DBGCTRL (0x4100800D) /**< \brief (DMAC) Debug Control */ +#define REG_DMAC_QOSCTRL (0x4100800E) /**< \brief (DMAC) QOS Control */ +#define REG_DMAC_SWTRIGCTRL (0x41008010) /**< \brief (DMAC) Software Trigger Control */ +#define REG_DMAC_PRICTRL0 (0x41008014) /**< \brief (DMAC) Priority Control 0 */ +#define REG_DMAC_INTPEND (0x41008020) /**< \brief (DMAC) Interrupt Pending */ +#define REG_DMAC_INTSTATUS (0x41008024) /**< \brief (DMAC) Interrupt Status */ +#define REG_DMAC_BUSYCH (0x41008028) /**< \brief (DMAC) Busy Channels */ +#define REG_DMAC_PENDCH (0x4100802C) /**< \brief (DMAC) Pending Channels */ +#define REG_DMAC_ACTIVE (0x41008030) /**< \brief (DMAC) Active Channel and Levels */ +#define REG_DMAC_BASEADDR (0x41008034) /**< \brief (DMAC) Descriptor Memory Section Base Address */ +#define REG_DMAC_WRBADDR (0x41008038) /**< \brief (DMAC) Write-Back Memory Section Base Address */ +#define REG_DMAC_CHID (0x4100803F) /**< \brief (DMAC) Channel ID */ +#define REG_DMAC_CHCTRLA (0x41008040) /**< \brief (DMAC) Channel Control A */ +#define REG_DMAC_CHCTRLB (0x41008044) /**< \brief (DMAC) Channel Control B */ +#define REG_DMAC_CHINTENCLR (0x4100804C) /**< \brief (DMAC) Channel Interrupt Enable Clear */ +#define REG_DMAC_CHINTENSET (0x4100804D) /**< \brief (DMAC) Channel Interrupt Enable Set */ +#define REG_DMAC_CHINTFLAG (0x4100804E) /**< \brief (DMAC) Channel Interrupt Flag Status and Clear */ +#define REG_DMAC_CHSTATUS (0x4100804F) /**< \brief (DMAC) Channel Status */ +#else +#define REG_DMAC_CTRL (*(RwReg16*)0x41008000UL) /**< \brief (DMAC) Control */ +#define REG_DMAC_CRCCTRL (*(RwReg16*)0x41008002UL) /**< \brief (DMAC) CRC Control */ +#define REG_DMAC_CRCDATAIN (*(RwReg *)0x41008004UL) /**< \brief (DMAC) CRC Data Input */ +#define REG_DMAC_CRCCHKSUM (*(RwReg *)0x41008008UL) /**< \brief (DMAC) CRC Checksum */ +#define REG_DMAC_CRCSTATUS (*(RwReg8 *)0x4100800CUL) /**< \brief (DMAC) CRC Status */ +#define REG_DMAC_DBGCTRL (*(RwReg8 *)0x4100800DUL) /**< \brief (DMAC) Debug Control */ +#define REG_DMAC_QOSCTRL (*(RwReg8 *)0x4100800EUL) /**< \brief (DMAC) QOS Control */ +#define REG_DMAC_SWTRIGCTRL (*(RwReg *)0x41008010UL) /**< \brief (DMAC) Software Trigger Control */ +#define REG_DMAC_PRICTRL0 (*(RwReg *)0x41008014UL) /**< \brief (DMAC) Priority Control 0 */ +#define REG_DMAC_INTPEND (*(RwReg16*)0x41008020UL) /**< \brief (DMAC) Interrupt Pending */ +#define REG_DMAC_INTSTATUS (*(RoReg *)0x41008024UL) /**< \brief (DMAC) Interrupt Status */ +#define REG_DMAC_BUSYCH (*(RoReg *)0x41008028UL) /**< \brief (DMAC) Busy Channels */ +#define REG_DMAC_PENDCH (*(RoReg *)0x4100802CUL) /**< \brief (DMAC) Pending Channels */ +#define REG_DMAC_ACTIVE (*(RoReg *)0x41008030UL) /**< \brief (DMAC) Active Channel and Levels */ +#define REG_DMAC_BASEADDR (*(RwReg *)0x41008034UL) /**< \brief (DMAC) Descriptor Memory Section Base Address */ +#define REG_DMAC_WRBADDR (*(RwReg *)0x41008038UL) /**< \brief (DMAC) Write-Back Memory Section Base Address */ +#define REG_DMAC_CHID (*(RwReg8 *)0x4100803FUL) /**< \brief (DMAC) Channel ID */ +#define REG_DMAC_CHCTRLA (*(RwReg8 *)0x41008040UL) /**< \brief (DMAC) Channel Control A */ +#define REG_DMAC_CHCTRLB (*(RwReg *)0x41008044UL) /**< \brief (DMAC) Channel Control B */ +#define REG_DMAC_CHINTENCLR (*(RwReg8 *)0x4100804CUL) /**< \brief (DMAC) Channel Interrupt Enable Clear */ +#define REG_DMAC_CHINTENSET (*(RwReg8 *)0x4100804DUL) /**< \brief (DMAC) Channel Interrupt Enable Set */ +#define REG_DMAC_CHINTFLAG (*(RwReg8 *)0x4100804EUL) /**< \brief (DMAC) Channel Interrupt Flag Status and Clear */ +#define REG_DMAC_CHSTATUS (*(RoReg8 *)0x4100804FUL) /**< \brief (DMAC) Channel Status */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +/* ========== Instance parameters for DMAC peripheral ========== */ +#define DMAC_CH_BITS 4 // Number of bits to select channel +#define DMAC_CH_NUM 16 // Number of channels +#define DMAC_CLK_AHB_ID 3 // AHB clock index +#define DMAC_EVIN_NUM 4 // Number of input events +#define DMAC_EVOUT_NUM 4 // Number of output events +#define DMAC_LVL_BITS 2 // Number of bit to select level priority +#define DMAC_LVL_NUM 4 // Enable priority level number +#define DMAC_QOSCTRL_D_RESETVALUE 2 // QOS dmac ahb interface reset value +#define DMAC_QOSCTRL_F_RESETVALUE 2 // QOS dmac fetch interface reset value +#define DMAC_QOSCTRL_WRB_RESETVALUE 2 // QOS dmac write back interface reset value +#define DMAC_TRIG_BITS 6 // Number of bits to select trigger source +#define DMAC_TRIG_NUM 40 // Number of peripheral triggers + +#endif /* _SAML22_DMAC_INSTANCE_ */ |