diff options
Diffstat (limited to 'watch-library/hpl/slcd')
| -rw-r--r-- | watch-library/hpl/slcd/hpl_slcd.c | 47 | ||||
| -rw-r--r-- | watch-library/hpl/slcd/hpl_slcd_cm_14_seg_mapping.h | 104 | ||||
| -rw-r--r-- | watch-library/hpl/slcd/hpl_slcd_cm_7_seg_mapping.h | 68 |
3 files changed, 0 insertions, 219 deletions
diff --git a/watch-library/hpl/slcd/hpl_slcd.c b/watch-library/hpl/slcd/hpl_slcd.c index f8f42bdd..0f58b1f5 100644 --- a/watch-library/hpl/slcd/hpl_slcd.c +++ b/watch-library/hpl/slcd/hpl_slcd.c @@ -35,8 +35,6 @@ #include <utils_assert.h> #include <hpl_slcd_sync.h> #include <hpl_slcd_config.h> -#include <hpl_slcd_cm_7_seg_mapping.h> -#include <hpl_slcd_cm_14_seg_mapping.h> static int32_t _slcd_sync_set_segment(struct _slcd_sync_device *dev, const uint32_t com, const uint32_t seg, const bool on); @@ -62,9 +60,6 @@ static struct slcd_configuration _slcd CONF_SLCD_BBEN << SLCD_CTRLB_BBEN_Pos | SLCD_CTRLB_BBD(CONF_SLCD_BBD - 1), SLCD_CTRLC_CTST(CONF_SLCD_CONTRAST_ADJUST), SLCD_CTRLD_DISPEN}; -static const struct slcd_char_setting cm_setting[] = SLCD_CHAR_SETTING_TABLE; -static const struct slcd_char_mapping cm7_lut[] = SLCD_SEG7_LUT; -static const struct slcd_char_mapping cm14_lut[] = SLCD_SEG14_LUT; /** * \brief Initialize SLCD Device Descriptor */ @@ -201,48 +196,6 @@ int32_t _slcd_sync_seg_blink(struct _slcd_sync_device *dev, uint32_t seg, const } /** - * \brief Displays a character - */ -int32_t _slcd_sync_write_char(struct _slcd_sync_device *dev, const uint8_t character, uint32_t index) -{ - uint32_t i; - uint32_t data = ~0; - if (cm_setting[index].size == 7) { - for (i = 0; i<sizeof(cm7_lut)>> 2; i++) { - if (cm7_lut[i].character == character) { - data = cm7_lut[i].mapping; - break; - } - } - } else if (cm_setting[index].size == 14) { - for (i = 0; i<sizeof(cm14_lut)>> 2; i++) { - if (cm14_lut[i].character == character) { - data = cm14_lut[i].mapping; - break; - } - } - } - if (data == 0xFFFFFFFF) { - return ERR_INVALID_ARG; - } - - hri_slcd_write_CMCFG_NSEG_bf(dev->hw, cm_setting[index].nseg); - hri_slcd_write_CMINDEX_CINDEX_bf(dev->hw, cm_setting[index].com_index); - hri_slcd_write_CMINDEX_SINDEX_bf(dev->hw, cm_setting[index].seg_index); - - if (cm_setting[index].size == 7) { - hri_slcd_write_CMDMASK_reg(dev->hw, SEG7_MASK); - } else if (cm_setting[index].size == 14) { - hri_slcd_write_CMDMASK_reg(dev->hw, SEG14_MASK); - } - while (hri_slcd_get_STATUS_CMWRBUSY_bit(dev->hw)) - ; - hri_slcd_write_CMDATA_reg(dev->hw, data); - - return ERR_NONE; -} - -/** * \brief Start animation play by a segment array */ int32_t _slcd_sync_start_animation(struct _slcd_sync_device *dev, const uint32_t segs[], uint32_t len, diff --git a/watch-library/hpl/slcd/hpl_slcd_cm_14_seg_mapping.h b/watch-library/hpl/slcd/hpl_slcd_cm_14_seg_mapping.h deleted file mode 100644 index 65777d6d..00000000 --- a/watch-library/hpl/slcd/hpl_slcd_cm_14_seg_mapping.h +++ /dev/null @@ -1,104 +0,0 @@ -#include <hpl_slcd_config.h> - -/** - * character segments position index - * - * For a 14-segments character, each segment has an unique position index. - * The segment layout and position index value is shown as below. - * The symbol '-', '|', '/', '\' represent the SLCD character segment, and the - * number represent each segment's position index, which equals to macro - * SEG14_0 to SEG14_7. - * The character lookup mapping table use those position index - * (SEG14_0..SEG14_14) to compose some visible arabic numerals, letters or some - * specific ASCII. - * For example char '1' can be represented by use position index 1,2. - * (SEG7_1 | SEG7_2). - * More predefined character lookup can be found at below "14-segment character - * lookup mapping table" - * - * -0 - * |5 \6 |7 /8 |1 - * -9 -10 - * |4 /11 |12 \13 |2 - * -3 - */ - -/** - * Character segment position remapping setting - * - * An SLCD screen typically use several hardware segments to display a - * character(for example from COM3/SEG0 to COM4/SEG7). - * The lowest COM and SEG index is 0 (COM3/SEG0 index is 0). - * The "hardware character segments index" maybe different with the "character - * segments position index". The remapping setting allow application to adjust - * those sequence. - * - */ -#define SEG14_0 (0x1 << CONF_SLCD_CM_14SEGS_0_SETTING) -#define SEG14_1 (0x1 << CONF_SLCD_CM_14SEGS_1_SETTING) -#define SEG14_2 (0x1 << CONF_SLCD_CM_14SEGS_2_SETTING) -#define SEG14_3 (0x1 << CONF_SLCD_CM_14SEGS_3_SETTING) -#define SEG14_4 (0x1 << CONF_SLCD_CM_14SEGS_4_SETTING) -#define SEG14_5 (0x1 << CONF_SLCD_CM_14SEGS_5_SETTING) -#define SEG14_6 (0x1 << CONF_SLCD_CM_14SEGS_6_SETTING) -#define SEG14_7 (0x1 << CONF_SLCD_CM_14SEGS_7_SETTING) -#define SEG14_8 (0x1 << CONF_SLCD_CM_14SEGS_8_SETTING) -#define SEG14_9 (0x1 << CONF_SLCD_CM_14SEGS_9_SETTING) -#define SEG14_10 (0x1 << CONF_SLCD_CM_14SEGS_10_SETTING) -#define SEG14_11 (0x1 << CONF_SLCD_CM_14SEGS_11_SETTING) -#define SEG14_12 (0x1 << CONF_SLCD_CM_14SEGS_12_SETTING) -#define SEG14_13 (0x1 << CONF_SLCD_CM_14SEGS_13_SETTING) - -/** - * 17-segments character mask value - */ -#define SEG14_MASK \ - (0xFFFFFF \ - & ~(SEG14_0 | SEG14_1 | SEG14_2 | SEG14_3 | SEG14_4 | SEG14_5 | SEG14_6 | SEG14_7 | SEG14_8 | SEG14_9 | SEG14_10 \ - | SEG14_11 | SEG14_12 | SEG14_13)) - -/** - * 14-segment character lookup mapping table - * struct slcd_char_mapping; - */ -#define SLCD_SEG14_LUT \ - { \ - {'0', SEG14_0 | SEG14_1 | SEG14_2 | SEG14_3 | SEG14_4 | SEG14_5 | SEG14_8 | SEG14_11}, \ - {'1', SEG14_1 | SEG14_2}, {'2', SEG14_0 | SEG14_1 | SEG14_3 | SEG14_4 | SEG14_9 | SEG14_10}, \ - {'3', SEG14_0 | SEG14_1 | SEG14_2 | SEG14_3 | SEG14_9 | SEG14_10}, \ - {'4', SEG14_1 | SEG14_2 | SEG14_5 | SEG14_9 | SEG14_10}, \ - {'5', SEG14_0 | SEG14_2 | SEG14_3 | SEG14_5 | SEG14_9 | SEG14_10}, \ - {'6', SEG14_0 | SEG14_2 | SEG14_3 | SEG14_4 | SEG14_5 | SEG14_9 | SEG14_10}, \ - {'7', SEG14_0 | SEG14_1 | SEG14_2}, \ - {'8', SEG14_0 | SEG14_1 | SEG14_2 | SEG14_3 | SEG14_4 | SEG14_5 | SEG14_9 | SEG14_10}, \ - {'9', SEG14_0 | SEG14_1 | SEG14_2 | SEG14_3 | SEG14_5 | SEG14_9 | SEG14_10}, \ - {'a', SEG14_0 | SEG14_1 | SEG14_2 | SEG14_4 | SEG14_5 | SEG14_9 | SEG14_10}, \ - {'b', SEG14_0 | SEG14_1 | SEG14_2 | SEG14_3 | SEG14_7 | SEG14_10 | SEG14_12}, \ - {'c', SEG14_0 | SEG14_3 | SEG14_4 | SEG14_5}, \ - {'d', SEG14_0 | SEG14_1 | SEG14_2 | SEG14_3 | SEG14_7 | SEG14_12}, \ - {'e', SEG14_0 | SEG14_3 | SEG14_4 | SEG14_5 | SEG14_9 | SEG14_10}, \ - {'f', SEG14_0 | SEG14_4 | SEG14_5 | SEG14_9 | SEG14_10}, \ - {'g', SEG14_0 | SEG14_2 | SEG14_3 | SEG14_4 | SEG14_5 | SEG14_10}, \ - {'h', SEG14_1 | SEG14_2 | SEG14_4 | SEG14_5 | SEG14_9 | SEG14_10}, \ - {'i', SEG14_1 | SEG14_2 | SEG14_4 | SEG14_5 | SEG14_9 | SEG14_10}, \ - {'j', SEG14_1 | SEG14_2 | SEG14_3 | SEG14_4}, {'k', SEG14_4 | SEG14_5 | SEG14_8 | SEG14_9 | SEG14_13}, \ - {'l', SEG14_3 | SEG14_4 | SEG14_5}, {'m', SEG14_1 | SEG14_2 | SEG14_4 | SEG14_5 | SEG14_6 | SEG14_8}, \ - {'n', SEG14_1 | SEG14_2 | SEG14_4 | SEG14_5 | SEG14_6 | SEG14_13}, \ - {'o', SEG14_0 | SEG14_1 | SEG14_2 | SEG14_3 | SEG14_4 | SEG14_5}, \ - {'p', SEG14_0 | SEG14_1 | SEG14_4 | SEG14_5 | SEG14_9 | SEG14_10}, \ - {'q', SEG14_0 | SEG14_1 | SEG14_2 | SEG14_3 | SEG14_4 | SEG14_5 | SEG14_13}, \ - {'r', SEG14_0 | SEG14_1 | SEG14_4 | SEG14_5 | SEG14_9 | SEG14_10 | SEG14_13}, \ - {'s', SEG14_0 | SEG14_3 | SEG14_5 | SEG14_9 | SEG14_13}, {'t', SEG14_0 | SEG14_7 | SEG14_12}, \ - {'u', SEG14_1 | SEG14_2 | SEG14_3 | SEG14_4 | SEG14_5}, {'v', SEG14_4 | SEG14_5 | SEG14_8 | SEG14_11}, \ - {'w', SEG14_1 | SEG14_2 | SEG14_4 | SEG14_5 | SEG14_11 | SEG14_13}, \ - {'x', SEG14_6 | SEG14_8 | SEG14_11 | SEG14_13}, \ - {'y', SEG14_1 | SEG14_2 | SEG14_3 | SEG14_5 | SEG14_9 | SEG14_10}, \ - {'z', SEG14_0 | SEG14_3 | SEG14_8 | SEG14_11}, {'-', SEG14_9 | SEG14_10}, \ - {'+', SEG14_7 | SEG14_9 | SEG14_10 | SEG14_12}, {'/', SEG14_8 | SEG14_11}, \ - {'=', SEG14_3 | SEG14_9 | SEG14_10}, \ - {'#', SEG14_1 | SEG14_2 | SEG14_3 | SEG14_7 | SEG14_9 | SEG14_10 | SEG14_12}, \ - {'*', SEG14_6 | SEG14_8 | SEG14_11 | SEG14_13}, {'\'', SEG14_13}, {')', SEG14_6 | SEG14_11}, \ - {'(', SEG14_8 | SEG14_13}, {'@', SEG14_0 | SEG14_1 | SEG14_2 | SEG14_3 | SEG14_4 | SEG14_9 | SEG14_13}, \ - {'$', SEG14_0 | SEG14_2 | SEG14_3 | SEG14_5 | SEG14_7 | SEG14_9 | SEG14_10 | SEG14_12}, \ - {'%', SEG14_2 | SEG14_5 | SEG14_8 | SEG14_11}, {'\\', SEG14_6 | SEG14_13}, {'_', SEG14_3}, {0, 0}, \ - } diff --git a/watch-library/hpl/slcd/hpl_slcd_cm_7_seg_mapping.h b/watch-library/hpl/slcd/hpl_slcd_cm_7_seg_mapping.h deleted file mode 100644 index eae344c8..00000000 --- a/watch-library/hpl/slcd/hpl_slcd_cm_7_seg_mapping.h +++ /dev/null @@ -1,68 +0,0 @@ -#include <hpl_slcd_config.h> - -/** - * character segments position index - * - * For a 7 segments character, each segment has an unique position index. - * The segment layout and position index value is shown as below. - * The symbol '-', '|' represent the SLCD character segment, and the - * number represent each segment's position index, which equals to macro - * SEG7_0 to SEG7_7. - * The character lookup mapping table use those position index (SEG7_0..SEG7_7) - * to compose some visible arabic numerals, letters or some specific ASCII. - * For example char '0' can be represented by use position index 0,1,2,3,4,5. - * (SEG7_0 | SEG7_1 | SEG7_2 | SEG7_3 | SEG7_4 | SEG7_5). - * More predefined character lookup can be found at below "7-segments character - * lookup mapping table" - * -0 - * |5 |1 - * -6 - * |4 |2 - * -3 - */ - -/** - * Character segment position remapping setting - * - * An SLCD screen typically use several hardware segments to display a - * character(for example from COM3/SEG0 to COM3/SEG7). - * The lowest COM and SEG index is 0 (COM3/SEG0 index is 0). - * The "hardware character segments index" maybe different with the "character - * segments position index". The remapping setting allow application to adjust - * those sequence. - * - */ -#define SEG7_0 (0x1 << CONF_SLCD_CM_7SEGS_0_SETTING) -#define SEG7_1 (0x1 << CONF_SLCD_CM_7SEGS_1_SETTING) -#define SEG7_2 (0x1 << CONF_SLCD_CM_7SEGS_2_SETTING) -#define SEG7_3 (0x1 << CONF_SLCD_CM_7SEGS_3_SETTING) -#define SEG7_4 (0x1 << CONF_SLCD_CM_7SEGS_4_SETTING) -#define SEG7_5 (0x1 << CONF_SLCD_CM_7SEGS_5_SETTING) -#define SEG7_6 (0x1 << CONF_SLCD_CM_7SEGS_6_SETTING) - -/** - * 7-segments character mask value - */ -#define SEG7_MASK (0xFFFFFF & ~(SEG7_0 | SEG7_1 | SEG7_2 | SEG7_3 | SEG7_4 | SEG7_5 | SEG7_6)) - -/** - * 7-segments character lookup mapping table. - * - * Array value of slcd_char_mapping struct, application can add or remove - * item from it. - */ -#define SLCD_SEG7_LUT \ - { \ - {0, 0}, {'0', SEG7_0 | SEG7_1 | SEG7_2 | SEG7_3 | SEG7_4 | SEG7_5}, {'1', SEG7_1 | SEG7_2}, \ - {'2', SEG7_0 | SEG7_1 | SEG7_3 | SEG7_4 | SEG7_6}, {'3', SEG7_0 | SEG7_1 | SEG7_2 | SEG7_3 | SEG7_6}, \ - {'4', SEG7_1 | SEG7_2 | SEG7_5 | SEG7_6}, {'5', SEG7_0 | SEG7_2 | SEG7_3 | SEG7_5 | SEG7_6}, \ - {'6', SEG7_0 | SEG7_2 | SEG7_3 | SEG7_4 | SEG7_5 | SEG7_6}, {'7', SEG7_0 | SEG7_1 | SEG7_2}, \ - {'8', SEG7_0 | SEG7_1 | SEG7_2 | SEG7_3 | SEG7_4 | SEG7_5 | SEG7_6}, \ - {'9', SEG7_0 | SEG7_1 | SEG7_2 | SEG7_5 | SEG7_6}, \ - {'a', SEG7_0 | SEG7_1 | SEG7_2 | SEG7_4 | SEG7_5 | SEG7_6}, \ - {'b', SEG7_2 | SEG7_3 | SEG7_4 | SEG7_5 | SEG7_6}, {'c', SEG7_0 | SEG7_3 | SEG7_4 | SEG7_5}, \ - {'d', SEG7_1 | SEG7_2 | SEG7_3 | SEG7_4 | SEG7_6}, {'e', SEG7_0 | SEG7_3 | SEG7_4 | SEG7_5 | SEG7_6}, \ - { \ - 'f', SEG7_0 | SEG7_4 | SEG7_5 | SEG7_6 \ - } \ - } |