diff options
Diffstat (limited to 'watch-library/include/instance/sercom4.h')
| -rw-r--r-- | watch-library/include/instance/sercom4.h | 142 |
1 files changed, 0 insertions, 142 deletions
diff --git a/watch-library/include/instance/sercom4.h b/watch-library/include/instance/sercom4.h deleted file mode 100644 index d5f5d736..00000000 --- a/watch-library/include/instance/sercom4.h +++ /dev/null @@ -1,142 +0,0 @@ -/** - * \file - * - * \brief Instance description for SERCOM4 - * - * Copyright (c) 2018 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - -#ifndef _SAML22_SERCOM4_INSTANCE_ -#define _SAML22_SERCOM4_INSTANCE_ - -/* ========== Register definition for SERCOM4 peripheral ========== */ -#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) -#define REG_SERCOM4_I2CM_CTRLA (0x42001400) /**< \brief (SERCOM4) I2CM Control A */ -#define REG_SERCOM4_I2CM_CTRLB (0x42001404) /**< \brief (SERCOM4) I2CM Control B */ -#define REG_SERCOM4_I2CM_BAUD (0x4200140C) /**< \brief (SERCOM4) I2CM Baud Rate */ -#define REG_SERCOM4_I2CM_INTENCLR (0x42001414) /**< \brief (SERCOM4) I2CM Interrupt Enable Clear */ -#define REG_SERCOM4_I2CM_INTENSET (0x42001416) /**< \brief (SERCOM4) I2CM Interrupt Enable Set */ -#define REG_SERCOM4_I2CM_INTFLAG (0x42001418) /**< \brief (SERCOM4) I2CM Interrupt Flag Status and Clear */ -#define REG_SERCOM4_I2CM_STATUS (0x4200141A) /**< \brief (SERCOM4) I2CM Status */ -#define REG_SERCOM4_I2CM_SYNCBUSY (0x4200141C) /**< \brief (SERCOM4) I2CM Synchronization Busy */ -#define REG_SERCOM4_I2CM_ADDR (0x42001424) /**< \brief (SERCOM4) I2CM Address */ -#define REG_SERCOM4_I2CM_DATA (0x42001428) /**< \brief (SERCOM4) I2CM Data */ -#define REG_SERCOM4_I2CM_DBGCTRL (0x42001430) /**< \brief (SERCOM4) I2CM Debug Control */ -#define REG_SERCOM4_I2CS_CTRLA (0x42001400) /**< \brief (SERCOM4) I2CS Control A */ -#define REG_SERCOM4_I2CS_CTRLB (0x42001404) /**< \brief (SERCOM4) I2CS Control B */ -#define REG_SERCOM4_I2CS_INTENCLR (0x42001414) /**< \brief (SERCOM4) I2CS Interrupt Enable Clear */ -#define REG_SERCOM4_I2CS_INTENSET (0x42001416) /**< \brief (SERCOM4) I2CS Interrupt Enable Set */ -#define REG_SERCOM4_I2CS_INTFLAG (0x42001418) /**< \brief (SERCOM4) I2CS Interrupt Flag Status and Clear */ -#define REG_SERCOM4_I2CS_STATUS (0x4200141A) /**< \brief (SERCOM4) I2CS Status */ -#define REG_SERCOM4_I2CS_SYNCBUSY (0x4200141C) /**< \brief (SERCOM4) I2CS Synchronization Busy */ -#define REG_SERCOM4_I2CS_ADDR (0x42001424) /**< \brief (SERCOM4) I2CS Address */ -#define REG_SERCOM4_I2CS_DATA (0x42001428) /**< \brief (SERCOM4) I2CS Data */ -#define REG_SERCOM4_SPI_CTRLA (0x42001400) /**< \brief (SERCOM4) SPI Control A */ -#define REG_SERCOM4_SPI_CTRLB (0x42001404) /**< \brief (SERCOM4) SPI Control B */ -#define REG_SERCOM4_SPI_BAUD (0x4200140C) /**< \brief (SERCOM4) SPI Baud Rate */ -#define REG_SERCOM4_SPI_INTENCLR (0x42001414) /**< \brief (SERCOM4) SPI Interrupt Enable Clear */ -#define REG_SERCOM4_SPI_INTENSET (0x42001416) /**< \brief (SERCOM4) SPI Interrupt Enable Set */ -#define REG_SERCOM4_SPI_INTFLAG (0x42001418) /**< \brief (SERCOM4) SPI Interrupt Flag Status and Clear */ -#define REG_SERCOM4_SPI_STATUS (0x4200141A) /**< \brief (SERCOM4) SPI Status */ -#define REG_SERCOM4_SPI_SYNCBUSY (0x4200141C) /**< \brief (SERCOM4) SPI Synchronization Busy */ -#define REG_SERCOM4_SPI_ADDR (0x42001424) /**< \brief (SERCOM4) SPI Address */ -#define REG_SERCOM4_SPI_DATA (0x42001428) /**< \brief (SERCOM4) SPI Data */ -#define REG_SERCOM4_SPI_DBGCTRL (0x42001430) /**< \brief (SERCOM4) SPI Debug Control */ -#define REG_SERCOM4_USART_CTRLA (0x42001400) /**< \brief (SERCOM4) USART Control A */ -#define REG_SERCOM4_USART_CTRLB (0x42001404) /**< \brief (SERCOM4) USART Control B */ -#define REG_SERCOM4_USART_CTRLC (0x42001408) /**< \brief (SERCOM4) USART Control C */ -#define REG_SERCOM4_USART_BAUD (0x4200140C) /**< \brief (SERCOM4) USART Baud Rate */ -#define REG_SERCOM4_USART_RXPL (0x4200140E) /**< \brief (SERCOM4) USART Receive Pulse Length */ -#define REG_SERCOM4_USART_INTENCLR (0x42001414) /**< \brief (SERCOM4) USART Interrupt Enable Clear */ -#define REG_SERCOM4_USART_INTENSET (0x42001416) /**< \brief (SERCOM4) USART Interrupt Enable Set */ -#define REG_SERCOM4_USART_INTFLAG (0x42001418) /**< \brief (SERCOM4) USART Interrupt Flag Status and Clear */ -#define REG_SERCOM4_USART_STATUS (0x4200141A) /**< \brief (SERCOM4) USART Status */ -#define REG_SERCOM4_USART_SYNCBUSY (0x4200141C) /**< \brief (SERCOM4) USART Synchronization Busy */ -#define REG_SERCOM4_USART_RXERRCNT (0x42001420) /**< \brief (SERCOM4) USART Receive Error Count */ -#define REG_SERCOM4_USART_DATA (0x42001428) /**< \brief (SERCOM4) USART Data */ -#define REG_SERCOM4_USART_DBGCTRL (0x42001430) /**< \brief (SERCOM4) USART Debug Control */ -#else -#define REG_SERCOM4_I2CM_CTRLA (*(RwReg *)0x42001400UL) /**< \brief (SERCOM4) I2CM Control A */ -#define REG_SERCOM4_I2CM_CTRLB (*(RwReg *)0x42001404UL) /**< \brief (SERCOM4) I2CM Control B */ -#define REG_SERCOM4_I2CM_BAUD (*(RwReg *)0x4200140CUL) /**< \brief (SERCOM4) I2CM Baud Rate */ -#define REG_SERCOM4_I2CM_INTENCLR (*(RwReg8 *)0x42001414UL) /**< \brief (SERCOM4) I2CM Interrupt Enable Clear */ -#define REG_SERCOM4_I2CM_INTENSET (*(RwReg8 *)0x42001416UL) /**< \brief (SERCOM4) I2CM Interrupt Enable Set */ -#define REG_SERCOM4_I2CM_INTFLAG (*(RwReg8 *)0x42001418UL) /**< \brief (SERCOM4) I2CM Interrupt Flag Status and Clear */ -#define REG_SERCOM4_I2CM_STATUS (*(RwReg16*)0x4200141AUL) /**< \brief (SERCOM4) I2CM Status */ -#define REG_SERCOM4_I2CM_SYNCBUSY (*(RoReg *)0x4200141CUL) /**< \brief (SERCOM4) I2CM Synchronization Busy */ -#define REG_SERCOM4_I2CM_ADDR (*(RwReg *)0x42001424UL) /**< \brief (SERCOM4) I2CM Address */ -#define REG_SERCOM4_I2CM_DATA (*(RwReg8 *)0x42001428UL) /**< \brief (SERCOM4) I2CM Data */ -#define REG_SERCOM4_I2CM_DBGCTRL (*(RwReg8 *)0x42001430UL) /**< \brief (SERCOM4) I2CM Debug Control */ -#define REG_SERCOM4_I2CS_CTRLA (*(RwReg *)0x42001400UL) /**< \brief (SERCOM4) I2CS Control A */ -#define REG_SERCOM4_I2CS_CTRLB (*(RwReg *)0x42001404UL) /**< \brief (SERCOM4) I2CS Control B */ -#define REG_SERCOM4_I2CS_INTENCLR (*(RwReg8 *)0x42001414UL) /**< \brief (SERCOM4) I2CS Interrupt Enable Clear */ -#define REG_SERCOM4_I2CS_INTENSET (*(RwReg8 *)0x42001416UL) /**< \brief (SERCOM4) I2CS Interrupt Enable Set */ -#define REG_SERCOM4_I2CS_INTFLAG (*(RwReg8 *)0x42001418UL) /**< \brief (SERCOM4) I2CS Interrupt Flag Status and Clear */ -#define REG_SERCOM4_I2CS_STATUS (*(RwReg16*)0x4200141AUL) /**< \brief (SERCOM4) I2CS Status */ -#define REG_SERCOM4_I2CS_SYNCBUSY (*(RoReg *)0x4200141CUL) /**< \brief (SERCOM4) I2CS Synchronization Busy */ -#define REG_SERCOM4_I2CS_ADDR (*(RwReg *)0x42001424UL) /**< \brief (SERCOM4) I2CS Address */ -#define REG_SERCOM4_I2CS_DATA (*(RwReg8 *)0x42001428UL) /**< \brief (SERCOM4) I2CS Data */ -#define REG_SERCOM4_SPI_CTRLA (*(RwReg *)0x42001400UL) /**< \brief (SERCOM4) SPI Control A */ -#define REG_SERCOM4_SPI_CTRLB (*(RwReg *)0x42001404UL) /**< \brief (SERCOM4) SPI Control B */ -#define REG_SERCOM4_SPI_BAUD (*(RwReg8 *)0x4200140CUL) /**< \brief (SERCOM4) SPI Baud Rate */ -#define REG_SERCOM4_SPI_INTENCLR (*(RwReg8 *)0x42001414UL) /**< \brief (SERCOM4) SPI Interrupt Enable Clear */ -#define REG_SERCOM4_SPI_INTENSET (*(RwReg8 *)0x42001416UL) /**< \brief (SERCOM4) SPI Interrupt Enable Set */ -#define REG_SERCOM4_SPI_INTFLAG (*(RwReg8 *)0x42001418UL) /**< \brief (SERCOM4) SPI Interrupt Flag Status and Clear */ -#define REG_SERCOM4_SPI_STATUS (*(RwReg16*)0x4200141AUL) /**< \brief (SERCOM4) SPI Status */ -#define REG_SERCOM4_SPI_SYNCBUSY (*(RoReg *)0x4200141CUL) /**< \brief (SERCOM4) SPI Synchronization Busy */ -#define REG_SERCOM4_SPI_ADDR (*(RwReg *)0x42001424UL) /**< \brief (SERCOM4) SPI Address */ -#define REG_SERCOM4_SPI_DATA (*(RwReg *)0x42001428UL) /**< \brief (SERCOM4) SPI Data */ -#define REG_SERCOM4_SPI_DBGCTRL (*(RwReg8 *)0x42001430UL) /**< \brief (SERCOM4) SPI Debug Control */ -#define REG_SERCOM4_USART_CTRLA (*(RwReg *)0x42001400UL) /**< \brief (SERCOM4) USART Control A */ -#define REG_SERCOM4_USART_CTRLB (*(RwReg *)0x42001404UL) /**< \brief (SERCOM4) USART Control B */ -#define REG_SERCOM4_USART_CTRLC (*(RwReg *)0x42001408UL) /**< \brief (SERCOM4) USART Control C */ -#define REG_SERCOM4_USART_BAUD (*(RwReg16*)0x4200140CUL) /**< \brief (SERCOM4) USART Baud Rate */ -#define REG_SERCOM4_USART_RXPL (*(RwReg8 *)0x4200140EUL) /**< \brief (SERCOM4) USART Receive Pulse Length */ -#define REG_SERCOM4_USART_INTENCLR (*(RwReg8 *)0x42001414UL) /**< \brief (SERCOM4) USART Interrupt Enable Clear */ -#define REG_SERCOM4_USART_INTENSET (*(RwReg8 *)0x42001416UL) /**< \brief (SERCOM4) USART Interrupt Enable Set */ -#define REG_SERCOM4_USART_INTFLAG (*(RwReg8 *)0x42001418UL) /**< \brief (SERCOM4) USART Interrupt Flag Status and Clear */ -#define REG_SERCOM4_USART_STATUS (*(RwReg16*)0x4200141AUL) /**< \brief (SERCOM4) USART Status */ -#define REG_SERCOM4_USART_SYNCBUSY (*(RoReg *)0x4200141CUL) /**< \brief (SERCOM4) USART Synchronization Busy */ -#define REG_SERCOM4_USART_RXERRCNT (*(RoReg8 *)0x42001420UL) /**< \brief (SERCOM4) USART Receive Error Count */ -#define REG_SERCOM4_USART_DATA (*(RwReg16*)0x42001428UL) /**< \brief (SERCOM4) USART Data */ -#define REG_SERCOM4_USART_DBGCTRL (*(RwReg8 *)0x42001430UL) /**< \brief (SERCOM4) USART Debug Control */ -#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ - -/* ========== Instance parameters for SERCOM4 peripheral ========== */ -#define SERCOM4_DMAC_ID_RX 10 // Index of DMA RX trigger -#define SERCOM4_DMAC_ID_TX 11 // Index of DMA TX trigger -#define SERCOM4_GCLK_ID_CORE 20 -#define SERCOM4_GCLK_ID_SLOW 15 -#define SERCOM4_INT_MSB 6 -#define SERCOM4_PMSB 3 -#define SERCOM4_SPI 1 // SPI mode implemented? -#define SERCOM4_TWIM 1 // TWI Master mode implemented? -#define SERCOM4_TWIS 1 // TWI Slave mode implemented? -#define SERCOM4_TWI_HSMODE 0 // TWI HighSpeed mode implemented? -#define SERCOM4_USART 1 // USART mode implemented? -#define SERCOM4_USART_ISO7816 1 // USART ISO7816 mode implemented? -#define SERCOM4_USART_LIN_MASTER 0 // USART LIN Master mode implemented? -#define SERCOM4_USART_RS485 1 // USART RS485 mode implemented? - -#endif /* _SAML22_SERCOM4_INSTANCE_ */ |