diff options
Diffstat (limited to 'watch-library')
-rw-r--r-- | watch-library/watch/watch.h | 13 |
1 files changed, 7 insertions, 6 deletions
diff --git a/watch-library/watch/watch.h b/watch-library/watch/watch.h index 2c3f9fad..43f582a3 100644 --- a/watch-library/watch/watch.h +++ b/watch-library/watch/watch.h @@ -428,12 +428,13 @@ uint32_t watch_get_backup_data(uint8_t reg); * Waking from backup is effectively like waking from reset, except that your @ref * app_wake_from_deep_sleep function will be called. * @warning In initial testing, it seems like the ALARM_BTN pin (PA02 RTC/IN2) cannot wake the device - from deep sleep mode. There is an errata note (Reference: 15010, linked) that says that - due to a silicon bug, PB01 cannot be used as RTC/IN2. It seems though that this bug may - also affect PA02. As a result — and I'm very bummed about this — you cannot use deep sleep - mode unless you set up an external wake interrupt using a device on the nine-pin connector - (i.e. an accelerometer with an interrupt pin). Otherwise your only option for waking will - be to unscrew the watch case and press the reset button on the back of the board. + * from deep sleep mode. There is an errata note (Reference: 15010, linked) that says that + * due to a silicon bug, PB01 cannot be used as RTC/IN2. It seems though that this bug may + * also affect PA02. As a result — and I'm very bummed about this — you cannot use deep sleep + * mode unless you set up an external wake interrupt using a device on the nine-pin connector + * (i.e. an accelerometer with an interrupt pin). Otherwise your only option for waking will + * be to unscrew the watch case and press the reset button on the back of the board. + * http://ww1.microchip.com/downloads/en/DeviceDoc/SAM_L22_Family_Errata_DS80000782B.pdf */ void watch_enter_deep_sleep(); /// @} |