From a11275d84c4ca04645eec72b1d1612d0781e0486 Mon Sep 17 00:00:00 2001 From: Joey Castillo Date: Wed, 26 Jan 2022 21:32:55 -0500 Subject: watch library: implement SPI --- apps/spi-test/app.c | 47 +++++------------------ make.mk | 2 + watch-library/hardware/hw/driver_init.c | 64 +++++++++++++++++++++++++++++++ watch-library/hardware/hw/driver_init.h | 6 +++ watch-library/hardware/watch/watch_spi.c | 46 ++++++++++++++++++++++ watch-library/shared/watch/watch.h | 1 + watch-library/shared/watch/watch_spi.h | 59 ++++++++++++++++++++++++++++ watch-library/simulator/watch/watch_spi.c | 33 ++++++++++++++++ 8 files changed, 221 insertions(+), 37 deletions(-) create mode 100644 watch-library/hardware/watch/watch_spi.c create mode 100644 watch-library/shared/watch/watch_spi.h create mode 100644 watch-library/simulator/watch/watch_spi.c diff --git a/apps/spi-test/app.c b/apps/spi-test/app.c index 6ddd2782..54b484ad 100644 --- a/apps/spi-test/app.c +++ b/apps/spi-test/app.c @@ -3,40 +3,10 @@ #include #include "watch.h" -// NOTE: as of this writing (10/25/21) there is no SPI controller functionality in the watch library. -// this is a very basic app to confirm that SPI is working, tested with board OSO-MISC-21-001 and a GD25Q16C Flash chip. -// The updated SPI Flash sensor board design is OSO-MISC-21-017 (it's easier to build, 0603 passives instead of 0402's). - -struct io_descriptor *io; -struct spi_m_sync_descriptor SPI_0; +// this is a very basic app to confirm that SPI is working, tested with board OSO-MISC-21-017 and a GD25Q16C Flash chip. void app_init(void) { - // SPI_0_CLOCK_init - hri_gclk_write_PCHCTRL_reg(GCLK, SERCOM3_GCLK_ID_CORE, CONF_GCLK_SERCOM3_CORE_SRC | (1 << GCLK_PCHCTRL_CHEN_Pos)); - hri_gclk_write_PCHCTRL_reg(GCLK, SERCOM3_GCLK_ID_SLOW, CONF_GCLK_SERCOM3_SLOW_SRC | (1 << GCLK_PCHCTRL_CHEN_Pos)); - hri_mclk_set_APBCMASK_SERCOM3_bit(MCLK); - - spi_m_sync_init(&SPI_0, SERCOM3); - - // SPI_0_PORT_init - gpio_set_pin_level(A3, true); - gpio_set_pin_direction(A3, GPIO_DIRECTION_OUT); - gpio_set_pin_function(A3, GPIO_PIN_FUNCTION_OFF); - - gpio_set_pin_level(A2, false); - gpio_set_pin_direction(A2, GPIO_DIRECTION_OUT); - gpio_set_pin_function(A2, PINMUX_PB02C_SERCOM3_PAD0); - - gpio_set_pin_direction(A4, GPIO_DIRECTION_IN); - gpio_set_pin_pull_mode(A4, GPIO_PULL_OFF); - gpio_set_pin_function(A4, PINMUX_PB00C_SERCOM3_PAD2); - - gpio_set_pin_level(A1, false); - gpio_set_pin_direction(A1, GPIO_DIRECTION_OUT); - gpio_set_pin_function(A1, PINMUX_PB01C_SERCOM3_PAD3); - - spi_m_sync_get_io_descriptor(&SPI_0, &io); - spi_m_sync_enable(&SPI_0); + watch_enable_spi(); } void app_wake_from_backup(void) { @@ -51,20 +21,23 @@ void app_prepare_for_standby(void) { void app_wake_from_standby(void) { } -static uint8_t get_id_command[4] = {0x9F}; bool app_loop(void) { - watch_set_pin_level(A3, false); - io_write(io, get_id_command, 1); + uint8_t get_id_command[1] = {0x9F}; uint8_t buf[3] = {0}; + watch_set_pin_level(A3, false); + // should print 0, 0, 0 + watch_spi_send(get_id_command, 1); printf("blank: %x, %x, %x\n", buf[0], buf[1], buf[2]); - io_read(io, buf, 3); - watch_set_pin_level(A3, true); + // should print c8, 40, 15 + watch_spi_receive(buf, 3); printf("ident: %x, %x, %x\n", buf[0], buf[1], buf[2]); + watch_set_pin_level(A3, true); + delay_ms(100); return false; diff --git a/make.mk b/make.mk index 11b87c71..47170963 100644 --- a/make.mk +++ b/make.mk @@ -85,6 +85,7 @@ SRCS += \ $(TOP)/watch-library/hardware/watch/watch_adc.c \ $(TOP)/watch-library/hardware/watch/watch_gpio.c \ $(TOP)/watch-library/hardware/watch/watch_i2c.c \ + $(TOP)/watch-library/hardware/watch/watch_spi.c \ $(TOP)/watch-library/hardware/watch/watch_uart.c \ $(TOP)/watch-library/hardware/watch/watch_deepsleep.c \ $(TOP)/watch-library/hardware/watch/watch_private.c \ @@ -152,6 +153,7 @@ SRCS += \ $(TOP)/watch-library/simulator/watch/watch_adc.c \ $(TOP)/watch-library/simulator/watch/watch_gpio.c \ $(TOP)/watch-library/simulator/watch/watch_i2c.c \ + $(TOP)/watch-library/simulator/watch/watch_spi.c \ $(TOP)/watch-library/simulator/watch/watch_uart.c \ $(TOP)/watch-library/simulator/watch/watch_deepsleep.c \ $(TOP)/watch-library/simulator/watch/watch_private.c \ diff --git a/watch-library/hardware/hw/driver_init.c b/watch-library/hardware/hw/driver_init.c index 09723bec..3e097a8e 100644 --- a/watch-library/hardware/hw/driver_init.c +++ b/watch-library/hardware/hw/driver_init.c @@ -15,6 +15,8 @@ struct slcd_sync_descriptor SEGMENT_LCD_0; struct i2c_m_sync_desc I2C_0; +struct spi_m_sync_descriptor SPI_0; + void I2C_0_PORT_init(void) { gpio_set_pin_pull_mode(SDA, @@ -50,6 +52,68 @@ void I2C_0_init(void) { I2C_0_PORT_init(); } +void SPI_0_PORT_init(void) { + + gpio_set_pin_level(A2, + // Initial level + // pad_initial_level + // Low + // High + false); + + // Set pin direction to output + gpio_set_pin_direction(A2, GPIO_DIRECTION_OUT); + + gpio_set_pin_function(A2, PINMUX_PB02C_SERCOM3_PAD0); + + // Set pin direction to input + gpio_set_pin_direction(A4, GPIO_DIRECTION_IN); + + gpio_set_pin_pull_mode(A4, + // Pull configuration + // pad_pull_config + // Off + // Pull-up + // Pull-down + GPIO_PULL_OFF); + + gpio_set_pin_function(A4, PINMUX_PB00C_SERCOM3_PAD2); + + gpio_set_pin_level(A1, + // Initial level + // pad_initial_level + // Low + // High + false); + + // Set pin direction to output + gpio_set_pin_direction(A1, GPIO_DIRECTION_OUT); + + gpio_set_pin_function(A1, PINMUX_PB01C_SERCOM3_PAD3); + + gpio_set_pin_level(A3, + // Initial level + // pad_initial_level + // Low + // High + true); + + // Set pin direction to output + gpio_set_pin_direction(A3, GPIO_DIRECTION_OUT); +} + +void SPI_0_CLOCK_init(void) { + hri_gclk_write_PCHCTRL_reg(GCLK, SERCOM3_GCLK_ID_CORE, CONF_GCLK_SERCOM3_CORE_SRC | (1 << GCLK_PCHCTRL_CHEN_Pos)); + hri_gclk_write_PCHCTRL_reg(GCLK, SERCOM3_GCLK_ID_SLOW, CONF_GCLK_SERCOM3_SLOW_SRC | (1 << GCLK_PCHCTRL_CHEN_Pos)); + hri_mclk_set_APBCMASK_SERCOM3_bit(MCLK); +} + +void SPI_0_init(void) { + SPI_0_CLOCK_init(); + spi_m_sync_init(&SPI_0, SERCOM3); + SPI_0_PORT_init(); +} + void delay_driver_init(void) { delay_init(SysTick); } diff --git a/watch-library/hardware/hw/driver_init.h b/watch-library/hardware/hw/driver_init.h index 6b5abaf3..90cb8867 100644 --- a/watch-library/hardware/hw/driver_init.h +++ b/watch-library/hardware/hw/driver_init.h @@ -43,12 +43,18 @@ extern struct i2c_m_sync_desc I2C_0; extern struct usart_sync_descriptor USART_0; +extern struct spi_m_sync_descriptor SPI_0; + extern struct slcd_sync_descriptor SEGMENT_LCD_0; void I2C_0_CLOCK_init(void); void I2C_0_init(void); void I2C_0_PORT_init(void); +void SPI_0_PORT_init(void); +void SPI_0_CLOCK_init(void); +void SPI_0_init(void); + void delay_driver_init(void); void EXTERNAL_IRQ_0_init(void); diff --git a/watch-library/hardware/watch/watch_spi.c b/watch-library/hardware/watch/watch_spi.c new file mode 100644 index 00000000..df68bbaa --- /dev/null +++ b/watch-library/hardware/watch/watch_spi.c @@ -0,0 +1,46 @@ +/* + * MIT License + * + * Copyright (c) 2022 Joey Castillo + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include "watch_spi.h" + +struct io_descriptor *spi_io; + +void watch_enable_spi(void) { + SPI_0_init(); + spi_m_sync_get_io_descriptor(&SPI_0, &spi_io); + spi_m_sync_enable(&SPI_0); +} + +void watch_disable_spi(void) { + spi_m_sync_disable(&SPI_0); + spi_io = NULL; +} + +void watch_spi_send(uint8_t *buf, uint16_t length) { + io_write(spi_io, buf, length); +} + +void watch_spi_receive(uint8_t *buf, uint16_t length) { + io_read(spi_io, buf, length); +} diff --git a/watch-library/shared/watch/watch.h b/watch-library/shared/watch/watch.h index 064f90ec..8e47594c 100644 --- a/watch-library/shared/watch/watch.h +++ b/watch-library/shared/watch/watch.h @@ -60,6 +60,7 @@ #include "watch_adc.h" #include "watch_gpio.h" #include "watch_i2c.h" +#include "watch_spi.h" #include "watch_uart.h" #include "watch_deepsleep.h" diff --git a/watch-library/shared/watch/watch_spi.h b/watch-library/shared/watch/watch_spi.h new file mode 100644 index 00000000..9bb0d194 --- /dev/null +++ b/watch-library/shared/watch/watch_spi.h @@ -0,0 +1,59 @@ +/* + * MIT License + * + * Copyright (c) 2022 Joey Castillo + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef _WATCH_SPI_H_INCLUDED +#define _WATCH_SPI_H_INCLUDED +////< @file watch_spi.h + +#include "watch.h" + +/** @addtogroup spi SPI Controller Driver + * @brief This section covers functions related to the SAM L22's built-in SPI driver, including + * configuring the SPI bus and writing to / reading from devices. + */ +/// @{ +/** @brief Enables the SPI peripheral. Call this before attempting to interface with SPI devices. + */ +void watch_enable_spi(void); + +/** @brief Disables the SPI peripheral. + */ +void watch_disable_spi(void); + +/** @brief Sends a series of values to a device on the SPI bus. + * @param buf A series of unsigned bytes; the data you wish to transmit. + * @param length The number of bytes in buf that you wish to send. + * @note This function does not manage the chip select pin (usually A3). + */ +void watch_spi_send(uint8_t *buf, uint16_t length); + +/** @brief Receives a series of values from a device on the SPI bus. + * @param buf Storage for the incoming bytes; on return, it will contain the received data. + * @param length The number of bytes that you wish to receive. + * @note This function does not manage the chip select pin (usually A3). + */ +void watch_spi_receive(uint8_t *buf, uint16_t length); + +/// @} +#endif diff --git a/watch-library/simulator/watch/watch_spi.c b/watch-library/simulator/watch/watch_spi.c new file mode 100644 index 00000000..dd2f8fa1 --- /dev/null +++ b/watch-library/simulator/watch/watch_spi.c @@ -0,0 +1,33 @@ +/* + * MIT License + * + * Copyright (c) 2022 Joey Castillo + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include "watch_spi.h" + +void watch_enable_spi(void) {} + +void watch_disable_spi(void) {} + +void watch_spi_send(uint8_t *buf, uint16_t length) {} + +void watch_spi_receive(uint8_t *buf, uint16_t length) {} -- cgit v1.2.3