From b3de08343b7db4ed380cdfa3ca0df824728999b1 Mon Sep 17 00:00:00 2001 From: joeycastillo Date: Wed, 15 Sep 2021 12:18:55 -0400 Subject: remove note about installing old toolchain --- README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'README.md') diff --git a/README.md b/README.md index 0e912a48..5b560bfe 100644 --- a/README.md +++ b/README.md @@ -47,7 +47,7 @@ Getting code on the watch ------------------------- The watch library in this repository is very work-in-progress, but it should allow you to get started. To create a new project, copy the “Sensor Watch Starter Project” and write your code in the app.c file. -You will need to install [the 9-2019-q4-major version of the GNU Arm Embedded Toolchain](https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads/9-2019-q4-major) to build projects for the watch. Note that the latest version, 10-2020-q4-major, will not currently work. +You will need to install [the GNU Arm Embedded Toolchain](https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads/) to build projects for the watch. The watch library has been tested with the `9-2019-q4-major` version and the `10.3-2021.07` versions. To build your project, open your terminal and navigate to the project's `make` folder, then type `make`. -- cgit v1.2.3