From f98bc9bb4ebdab19834a7dd1c8cd8984181d3d3e Mon Sep 17 00:00:00 2001
From: Joey Castillo <jose.castillo@gmail.com>
Date: Mon, 25 Oct 2021 16:04:10 -0400
Subject: steps toward SPI support in watch library

---
 apps/Sensor Watch SPI Test/app.c           | 71 ++++++++++++++++++++++++++++++
 apps/Sensor Watch SPI Test/make/.gitignore |  1 +
 apps/Sensor Watch SPI Test/make/Makefile   | 10 +++++
 3 files changed, 82 insertions(+)
 create mode 100644 apps/Sensor Watch SPI Test/app.c
 create mode 100755 apps/Sensor Watch SPI Test/make/.gitignore
 create mode 100755 apps/Sensor Watch SPI Test/make/Makefile

(limited to 'apps/Sensor Watch SPI Test')

diff --git a/apps/Sensor Watch SPI Test/app.c b/apps/Sensor Watch SPI Test/app.c
new file mode 100644
index 00000000..3fba9386
--- /dev/null
+++ b/apps/Sensor Watch SPI Test/app.c	
@@ -0,0 +1,71 @@
+#include <stdio.h>
+#include <string.h>
+#include <peripheral_clk_config.h>
+#include "watch.h"
+
+// NOTE: as of this writing (10/25/21) there is no SPI controller functionality in the watch library.
+// this is a very basic app to confirm that SPI is working, tested with board OSO-MISC-21-001 and a GD25Q16C Flash chip.
+// The updated SPI Flash sensor board design is OSO-MISC-21-017 (it's easier to build, 0603 passives instead of 0402's).
+
+struct io_descriptor *io;
+struct spi_m_sync_descriptor SPI_0;
+
+void app_init() {
+    // SPI_0_CLOCK_init
+    hri_gclk_write_PCHCTRL_reg(GCLK, SERCOM3_GCLK_ID_CORE, CONF_GCLK_SERCOM3_CORE_SRC | (1 << GCLK_PCHCTRL_CHEN_Pos));
+    hri_gclk_write_PCHCTRL_reg(GCLK, SERCOM3_GCLK_ID_SLOW, CONF_GCLK_SERCOM3_SLOW_SRC | (1 << GCLK_PCHCTRL_CHEN_Pos));
+    hri_mclk_set_APBCMASK_SERCOM3_bit(MCLK);
+
+    spi_m_sync_init(&SPI_0, SERCOM3);
+
+    // SPI_0_PORT_init
+    gpio_set_pin_level(A3, true);
+    gpio_set_pin_direction(A3, GPIO_DIRECTION_OUT);
+    gpio_set_pin_function(A3, GPIO_PIN_FUNCTION_OFF);
+
+    gpio_set_pin_level(A2, false);
+    gpio_set_pin_direction(A2, GPIO_DIRECTION_OUT);
+    gpio_set_pin_function(A2, PINMUX_PB02C_SERCOM3_PAD0);
+
+    gpio_set_pin_direction(A4, GPIO_DIRECTION_IN);
+    gpio_set_pin_pull_mode(A4, GPIO_PULL_OFF);
+    gpio_set_pin_function(A4, PINMUX_PB00C_SERCOM3_PAD2);
+
+    gpio_set_pin_level(A1, false);
+    gpio_set_pin_direction(A1, GPIO_DIRECTION_OUT);
+    gpio_set_pin_function(A1, PINMUX_PB01C_SERCOM3_PAD3);
+
+    spi_m_sync_get_io_descriptor(&SPI_0, &io);
+    spi_m_sync_enable(&SPI_0);
+}
+
+void app_wake_from_backup() {
+}
+
+void app_setup() {
+}
+
+void app_prepare_for_standby() {
+}
+
+void app_wake_from_standby() {
+}
+
+static uint8_t get_id_command[4] = {0x9F};
+
+bool app_loop() {
+    watch_set_pin_level(A3, false);
+    io_write(io, get_id_command, 1);
+    uint8_t buf[3] = {0};
+
+    // should print 0, 0, 0
+    printf("blank: %x, %x, %x\n", buf[0], buf[1], buf[2]);
+    io_read(io, buf, 3);
+    watch_set_pin_level(A3, true);
+    // should print c8, 40, 15
+    printf("ident: %x, %x, %x\n", buf[0], buf[1], buf[2]);
+
+    delay_ms(100);
+
+    return false;
+}
diff --git a/apps/Sensor Watch SPI Test/make/.gitignore b/apps/Sensor Watch SPI Test/make/.gitignore
new file mode 100755
index 00000000..3722ac63
--- /dev/null
+++ b/apps/Sensor Watch SPI Test/make/.gitignore	
@@ -0,0 +1 @@
+build/
diff --git a/apps/Sensor Watch SPI Test/make/Makefile b/apps/Sensor Watch SPI Test/make/Makefile
new file mode 100755
index 00000000..c66ad20c
--- /dev/null
+++ b/apps/Sensor Watch SPI Test/make/Makefile	
@@ -0,0 +1,10 @@
+TOP = ../../..
+include $(TOP)/make.mk
+
+INCLUDES += \
+  -I../
+
+SRCS += \
+  ../app.c
+
+include $(TOP)/rules.mk
-- 
cgit v1.2.3