From ac2e205ae9f465c27297ea542c72e8cfe4966f8c Mon Sep 17 00:00:00 2001 From: Willian Paixao Date: Sun, 5 Dec 2021 19:16:34 +0100 Subject: remove tinyusb directory --- .../bsp/samd51/boards/feather_m4_express/board.h | 50 ------- .../bsp/samd51/boards/feather_m4_express/board.mk | 8 - .../feather_m4_express/feather_m4_express.ld | 166 --------------------- tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.h | 50 ------- tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.mk | 9 -- .../bsp/samd51/boards/itsybitsy_m4/itsybitsy_m4.ld | 166 --------------------- .../hw/bsp/samd51/boards/metro_m4_express/board.h | 50 ------- .../hw/bsp/samd51/boards/metro_m4_express/board.mk | 10 -- .../boards/metro_m4_express/metro_m4_express.ld | 166 --------------------- tinyusb/hw/bsp/samd51/boards/pybadge/board.h | 50 ------- tinyusb/hw/bsp/samd51/boards/pybadge/board.mk | 8 - tinyusb/hw/bsp/samd51/boards/pybadge/pybadge.ld | 166 --------------------- tinyusb/hw/bsp/samd51/boards/pyportal/board.h | 50 ------- tinyusb/hw/bsp/samd51/boards/pyportal/board.mk | 8 - tinyusb/hw/bsp/samd51/boards/pyportal/pyportal.ld | 166 --------------------- 15 files changed, 1123 deletions(-) delete mode 100755 tinyusb/hw/bsp/samd51/boards/feather_m4_express/board.h delete mode 100755 tinyusb/hw/bsp/samd51/boards/feather_m4_express/board.mk delete mode 100755 tinyusb/hw/bsp/samd51/boards/feather_m4_express/feather_m4_express.ld delete mode 100755 tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.h delete mode 100755 tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.mk delete mode 100755 tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/itsybitsy_m4.ld delete mode 100755 tinyusb/hw/bsp/samd51/boards/metro_m4_express/board.h delete mode 100755 tinyusb/hw/bsp/samd51/boards/metro_m4_express/board.mk delete mode 100755 tinyusb/hw/bsp/samd51/boards/metro_m4_express/metro_m4_express.ld delete mode 100755 tinyusb/hw/bsp/samd51/boards/pybadge/board.h delete mode 100755 tinyusb/hw/bsp/samd51/boards/pybadge/board.mk delete mode 100755 tinyusb/hw/bsp/samd51/boards/pybadge/pybadge.ld delete mode 100755 tinyusb/hw/bsp/samd51/boards/pyportal/board.h delete mode 100755 tinyusb/hw/bsp/samd51/boards/pyportal/board.mk delete mode 100755 tinyusb/hw/bsp/samd51/boards/pyportal/pyportal.ld (limited to 'tinyusb/hw/bsp/samd51/boards') diff --git a/tinyusb/hw/bsp/samd51/boards/feather_m4_express/board.h b/tinyusb/hw/bsp/samd51/boards/feather_m4_express/board.h deleted file mode 100755 index 1d5ed804..00000000 --- a/tinyusb/hw/bsp/samd51/boards/feather_m4_express/board.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN 23 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN 16 // D5 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_TX_PIN (32 + 17) -#define UART_RX_PIN (32 + 16) - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd51/boards/feather_m4_express/board.mk b/tinyusb/hw/bsp/samd51/boards/feather_m4_express/board.mk deleted file mode 100755 index a8a98a98..00000000 --- a/tinyusb/hw/bsp/samd51/boards/feather_m4_express/board.mk +++ /dev/null @@ -1,8 +0,0 @@ -CFLAGS += -D__SAMD51J19A__ - -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD51J19 - -flash: flash-bossac diff --git a/tinyusb/hw/bsp/samd51/boards/feather_m4_express/feather_m4_express.ld b/tinyusb/hw/bsp/samd51/boards/feather_m4_express/feather_m4_express.ld deleted file mode 100755 index f1a021d7..00000000 --- a/tinyusb/hw/bsp/samd51/boards/feather_m4_express/feather_m4_express.ld +++ /dev/null @@ -1,166 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD51G19A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 16K, LENGTH = 0x00080000 - 16K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00030000 - bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 - qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0xC000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - .bkupram (NOLOAD): - { - . = ALIGN(8); - _sbkupram = .; - *(.bkupram .bkupram.*); - . = ALIGN(8); - _ebkupram = .; - } > bkupram - - .qspi (NOLOAD): - { - . = ALIGN(8); - _sqspi = .; - *(.qspi .qspi.*); - . = ALIGN(8); - _eqspi = .; - } > qspi - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.h b/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.h deleted file mode 100755 index 0760d428..00000000 --- a/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN 22 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN 18 // D5 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_TX_PIN 16 -#define UART_RX_PIN 17 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.mk b/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.mk deleted file mode 100755 index 57a680e9..00000000 --- a/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -CFLAGS += -D__SAMD51J19A__ - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD51J19 - -flash: flash-bossac diff --git a/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/itsybitsy_m4.ld b/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/itsybitsy_m4.ld deleted file mode 100755 index f1a021d7..00000000 --- a/tinyusb/hw/bsp/samd51/boards/itsybitsy_m4/itsybitsy_m4.ld +++ /dev/null @@ -1,166 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD51G19A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 16K, LENGTH = 0x00080000 - 16K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00030000 - bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 - qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0xC000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - .bkupram (NOLOAD): - { - . = ALIGN(8); - _sbkupram = .; - *(.bkupram .bkupram.*); - . = ALIGN(8); - _ebkupram = .; - } > bkupram - - .qspi (NOLOAD): - { - . = ALIGN(8); - _sqspi = .; - *(.qspi .qspi.*); - . = ALIGN(8); - _eqspi = .; - } > qspi - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/samd51/boards/metro_m4_express/board.h b/tinyusb/hw/bsp/samd51/boards/metro_m4_express/board.h deleted file mode 100755 index 9bb5f815..00000000 --- a/tinyusb/hw/bsp/samd51/boards/metro_m4_express/board.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN 16 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN (32+14) // D5 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_TX_PIN 23 -#define UART_RX_PIN 22 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd51/boards/metro_m4_express/board.mk b/tinyusb/hw/bsp/samd51/boards/metro_m4_express/board.mk deleted file mode 100755 index d7953cc2..00000000 --- a/tinyusb/hw/bsp/samd51/boards/metro_m4_express/board.mk +++ /dev/null @@ -1,10 +0,0 @@ -CFLAGS += -D__SAMD51J19A__ - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD51J19 - -flash: flash-bossac - diff --git a/tinyusb/hw/bsp/samd51/boards/metro_m4_express/metro_m4_express.ld b/tinyusb/hw/bsp/samd51/boards/metro_m4_express/metro_m4_express.ld deleted file mode 100755 index f1a021d7..00000000 --- a/tinyusb/hw/bsp/samd51/boards/metro_m4_express/metro_m4_express.ld +++ /dev/null @@ -1,166 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD51G19A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 16K, LENGTH = 0x00080000 - 16K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00030000 - bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 - qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0xC000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - .bkupram (NOLOAD): - { - . = ALIGN(8); - _sbkupram = .; - *(.bkupram .bkupram.*); - . = ALIGN(8); - _ebkupram = .; - } > bkupram - - .qspi (NOLOAD): - { - . = ALIGN(8); - _sqspi = .; - *(.qspi .qspi.*); - . = ALIGN(8); - _eqspi = .; - } > qspi - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/samd51/boards/pybadge/board.h b/tinyusb/hw/bsp/samd51/boards/pybadge/board.h deleted file mode 100755 index 1d5ed804..00000000 --- a/tinyusb/hw/bsp/samd51/boards/pybadge/board.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN 23 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN 16 // D5 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_TX_PIN (32 + 17) -#define UART_RX_PIN (32 + 16) - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd51/boards/pybadge/board.mk b/tinyusb/hw/bsp/samd51/boards/pybadge/board.mk deleted file mode 100755 index a8a98a98..00000000 --- a/tinyusb/hw/bsp/samd51/boards/pybadge/board.mk +++ /dev/null @@ -1,8 +0,0 @@ -CFLAGS += -D__SAMD51J19A__ - -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD51J19 - -flash: flash-bossac diff --git a/tinyusb/hw/bsp/samd51/boards/pybadge/pybadge.ld b/tinyusb/hw/bsp/samd51/boards/pybadge/pybadge.ld deleted file mode 100755 index f1a021d7..00000000 --- a/tinyusb/hw/bsp/samd51/boards/pybadge/pybadge.ld +++ /dev/null @@ -1,166 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD51G19A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 16K, LENGTH = 0x00080000 - 16K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00030000 - bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 - qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0xC000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - .bkupram (NOLOAD): - { - . = ALIGN(8); - _sbkupram = .; - *(.bkupram .bkupram.*); - . = ALIGN(8); - _ebkupram = .; - } > bkupram - - .qspi (NOLOAD): - { - . = ALIGN(8); - _sqspi = .; - *(.qspi .qspi.*); - . = ALIGN(8); - _eqspi = .; - } > qspi - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/tinyusb/hw/bsp/samd51/boards/pyportal/board.h b/tinyusb/hw/bsp/samd51/boards/pyportal/board.h deleted file mode 100755 index 9e51ded3..00000000 --- a/tinyusb/hw/bsp/samd51/boards/pyportal/board.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN (32+23) -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN (32+22) // D2 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_TX_PIN (32 + 13) -#define UART_RX_PIN (32 + 12) - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/samd51/boards/pyportal/board.mk b/tinyusb/hw/bsp/samd51/boards/pyportal/board.mk deleted file mode 100755 index a8a98a98..00000000 --- a/tinyusb/hw/bsp/samd51/boards/pyportal/board.mk +++ /dev/null @@ -1,8 +0,0 @@ -CFLAGS += -D__SAMD51J19A__ - -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD51J19 - -flash: flash-bossac diff --git a/tinyusb/hw/bsp/samd51/boards/pyportal/pyportal.ld b/tinyusb/hw/bsp/samd51/boards/pyportal/pyportal.ld deleted file mode 100755 index f1a021d7..00000000 --- a/tinyusb/hw/bsp/samd51/boards/pyportal/pyportal.ld +++ /dev/null @@ -1,166 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD51G19A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 16K, LENGTH = 0x00080000 - 16K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00030000 - bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 - qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0xC000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - .bkupram (NOLOAD): - { - . = ALIGN(8); - _sbkupram = .; - *(.bkupram .bkupram.*); - . = ALIGN(8); - _ebkupram = .; - } > bkupram - - .qspi (NOLOAD): - { - . = ALIGN(8); - _sqspi = .; - *(.qspi .qspi.*); - . = ALIGN(8); - _eqspi = .; - } > qspi - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} -- cgit v1.2.3