From 39a5c822a2a2e798e2e39ff8a98b7af84253026c Mon Sep 17 00:00:00 2001
From: Joey Castillo <jose.castillo@gmail.com>
Date: Sat, 28 Aug 2021 12:50:18 -0400
Subject: add tinyusb

---
 tinyusb/hw/bsp/stm32f207nucleo/board.mk | 48 +++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)
 create mode 100755 tinyusb/hw/bsp/stm32f207nucleo/board.mk

(limited to 'tinyusb/hw/bsp/stm32f207nucleo/board.mk')

diff --git a/tinyusb/hw/bsp/stm32f207nucleo/board.mk b/tinyusb/hw/bsp/stm32f207nucleo/board.mk
new file mode 100755
index 00000000..2b979f3d
--- /dev/null
+++ b/tinyusb/hw/bsp/stm32f207nucleo/board.mk
@@ -0,0 +1,48 @@
+ST_FAMILY = f2
+DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
+
+ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
+ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
+
+CFLAGS += \
+  -flto \
+  -mthumb \
+  -mabi=aapcs \
+  -mcpu=cortex-m3 \
+  -mfloat-abi=soft \
+  -nostdlib -nostartfiles \
+  -DSTM32F207xx \
+  -DCFG_TUSB_MCU=OPT_MCU_STM32F2
+
+# mcu driver cause following warnings
+CFLAGS += -Wno-error=sign-compare
+
+# All source paths should be relative to the top level.
+LD_FILE = hw/bsp/$(BOARD)/STM32F207ZGTx_FLASH.ld
+
+SRC_C += \
+  src/portable/st/synopsys/dcd_synopsys.c \
+  $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \
+  $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \
+  $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \
+  $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \
+  $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \
+  $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c
+
+SRC_S += \
+  $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f207xx.s
+
+INC += \
+  $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
+  $(TOP)/$(ST_CMSIS)/Include \
+  $(TOP)/$(ST_HAL_DRIVER)/Inc \
+  $(TOP)/hw/bsp/$(BOARD)
+
+# For freeRTOS port source
+FREERTOS_PORT = ARM_CM3
+
+# For flash-jlink target
+JLINK_DEVICE = stm32f207zg
+
+# flash target using on-board stlink
+flash: flash-stlink
-- 
cgit v1.2.3