From 39a5c822a2a2e798e2e39ff8a98b7af84253026c Mon Sep 17 00:00:00 2001 From: Joey Castillo Date: Sat, 28 Aug 2021 12:50:18 -0400 Subject: add tinyusb --- tinyusb/src/portable/nordic/nrf5x/dcd_nrf5x.c | 1050 +++++++++++++++++++++++++ 1 file changed, 1050 insertions(+) create mode 100755 tinyusb/src/portable/nordic/nrf5x/dcd_nrf5x.c (limited to 'tinyusb/src/portable/nordic') diff --git a/tinyusb/src/portable/nordic/nrf5x/dcd_nrf5x.c b/tinyusb/src/portable/nordic/nrf5x/dcd_nrf5x.c new file mode 100755 index 00000000..f6b64c98 --- /dev/null +++ b/tinyusb/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -0,0 +1,1050 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb_option.h" + +#if TUSB_OPT_DEVICE_ENABLED && CFG_TUSB_MCU == OPT_MCU_NRF5X + +#include "nrf.h" +#include "nrf_clock.h" +#include "nrf_power.h" +#include "nrfx_usbd_errata.h" +#include "device/dcd.h" + +// TODO remove later +#include "device/usbd.h" +#include "device/usbd_pvt.h" // to use defer function helper + +/*------------------------------------------------------------------*/ +/* MACRO TYPEDEF CONSTANT ENUM + *------------------------------------------------------------------*/ +enum +{ + // Max allowed by USB specs + MAX_PACKET_SIZE = 64, + + // Mask of all END event (IN & OUT) for all endpoints. ENDEPIN0-7, ENDEPOUT0-7, ENDISOIN, ENDISOOUT + EDPT_END_ALL_MASK = (0xff << USBD_INTEN_ENDEPIN0_Pos) | (0xff << USBD_INTEN_ENDEPOUT0_Pos) | + USBD_INTENCLR_ENDISOIN_Msk | USBD_INTEN_ENDISOOUT_Msk +}; + +enum +{ + EP_ISO_NUM = 8, // Endpoint number is fixed (8) for ISOOUT and ISOIN + EP_CBI_COUNT = 8 // Control Bulk Interrupt endpoints count +}; + +// Transfer Descriptor +typedef struct +{ + uint8_t* buffer; + uint16_t total_len; + volatile uint16_t actual_len; + uint16_t mps; // max packet size + + // nRF will auto accept OUT packet after DMA is done + // indicate packet is already ACK + volatile bool data_received; + + // Set to true when data was transferred from RAM to ISO IN output buffer. + // New data can be put in ISO IN output buffer after SOF. + bool iso_in_transfer_ready; + +} xfer_td_t; + +// Data for managing dcd +static struct +{ + // All 8 endpoints including control IN & OUT (offset 1) + // +1 for ISO endpoints + xfer_td_t xfer[EP_CBI_COUNT + 1][2]; + + // Number of pending DMA that is started but not handled yet by dcd_int_handler(). + // Since nRF can only carry one DMA can run at a time, this value is normally be either 0 or 1. + // However, in critical section with interrupt disabled, the DMA can be finished and added up + // until handled by dcd_int_handler() when exiting critical section. + volatile uint8_t dma_pending; +}_dcd; + +/*------------------------------------------------------------------*/ +/* Control / Bulk / Interrupt (CBI) Transfer + *------------------------------------------------------------------*/ + +// NVIC_GetEnableIRQ is only available in CMSIS v5 +#ifndef NVIC_GetEnableIRQ +static inline uint32_t NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif + +// check if we are in ISR +TU_ATTR_ALWAYS_INLINE static inline bool is_in_isr(void) +{ + return (SCB->ICSR & SCB_ICSR_VECTACTIVE_Msk) ? true : false; +} + +// helper to start DMA +// TODO use Cortex M4 LDREX and STREX command (atomic) to have better mutex access to EasyDMA +// since current implementation does not 100% guarded against race condition +static void edpt_dma_start(volatile uint32_t* reg_startep) +{ + // Only one dma can be active + if ( _dcd.dma_pending ) + { + if (is_in_isr()) + { + // Called within ISR, use usbd task to defer later + usbd_defer_func( (osal_task_func_t) edpt_dma_start, (void*) reg_startep, true ); + return; + } + else + { + if ( __get_PRIMASK() || !NVIC_GetEnableIRQ(USBD_IRQn) ) + { + // Called in critical section with interrupt disabled. We have to manually check + // for the DMA complete by comparing current pending DMA with number of ENDED Events + uint32_t ended = 0; + + while ( _dcd.dma_pending > ((uint8_t) ended) ) + { + ended = NRF_USBD->EVENTS_ENDISOIN + NRF_USBD->EVENTS_ENDISOOUT; + + for (uint8_t i=0; iEVENTS_ENDEPIN[i] + NRF_USBD->EVENTS_ENDEPOUT[i]; + } + } + }else + { + // Called in non-critical thread-mode, should be 99% of the time. + // Should be safe to blocking wait until previous DMA transfer complete + while ( _dcd.dma_pending ) { } + } + } + } + + _dcd.dma_pending++; + + (*reg_startep) = 1; + __ISB(); __DSB(); +} + +// DMA is complete +static void edpt_dma_end(void) +{ + TU_ASSERT(_dcd.dma_pending, ); + _dcd.dma_pending = 0; +} + +// helper to set TASKS_EP0STATUS / TASKS_EP0RCVOUT since they also need EasyDMA +// However TASKS_EP0STATUS doesn't trigger any DMA transfer and got ENDED event subsequently +// Therefore dma_running state will be corrected right away +void start_ep0_task(volatile uint32_t* reg_task) +{ + edpt_dma_start(reg_task); + + // correct the dma_running++ in dma start + if (_dcd.dma_pending) _dcd.dma_pending--; +} + +// helper getting td +static inline xfer_td_t* get_td(uint8_t epnum, uint8_t dir) +{ + return &_dcd.xfer[epnum][dir]; +} + +// Start DMA to move data from Endpoint -> RAM +static void xact_out_dma(uint8_t epnum) +{ + xfer_td_t* xfer = get_td(epnum, TUSB_DIR_OUT); + uint32_t xact_len; + + if (epnum == EP_ISO_NUM) + { + xact_len = NRF_USBD->SIZE.ISOOUT; + // If ZERO bit is set, ignore ISOOUT length + if (xact_len & USBD_SIZE_ISOOUT_ZERO_Msk) xact_len = 0; + else + { + // Trigger DMA move data from Endpoint -> SRAM + NRF_USBD->ISOOUT.PTR = (uint32_t) xfer->buffer; + NRF_USBD->ISOOUT.MAXCNT = xact_len; + + edpt_dma_start(&NRF_USBD->TASKS_STARTISOOUT); + } + } + else + { + xact_len = (uint8_t)NRF_USBD->SIZE.EPOUT[epnum]; + + // Trigger DMA move data from Endpoint -> SRAM + NRF_USBD->EPOUT[epnum].PTR = (uint32_t) xfer->buffer; + NRF_USBD->EPOUT[epnum].MAXCNT = xact_len; + + edpt_dma_start(&NRF_USBD->TASKS_STARTEPOUT[epnum]); + } + + xfer->buffer += xact_len; + xfer->actual_len += xact_len; +} + +// Prepare for a CBI transaction IN, call at the start +// it start DMA to transfer data from RAM -> Endpoint +static void xact_in_dma(uint8_t epnum) +{ + xfer_td_t* xfer = get_td(epnum, TUSB_DIR_IN); + + // Each transaction is up to Max Packet Size + uint16_t const xact_len = tu_min16(xfer->total_len - xfer->actual_len, xfer->mps); + + NRF_USBD->EPIN[epnum].PTR = (uint32_t) xfer->buffer; + NRF_USBD->EPIN[epnum].MAXCNT = xact_len; + + xfer->buffer += xact_len; + + edpt_dma_start(&NRF_USBD->TASKS_STARTEPIN[epnum]); +} + +//--------------------------------------------------------------------+ +// Controller API +//--------------------------------------------------------------------+ +void dcd_init (uint8_t rhport) +{ + (void) rhport; +} + +void dcd_int_enable(uint8_t rhport) +{ + (void) rhport; + NVIC_EnableIRQ(USBD_IRQn); +} + +void dcd_int_disable(uint8_t rhport) +{ + (void) rhport; + NVIC_DisableIRQ(USBD_IRQn); +} + +void dcd_set_address (uint8_t rhport, uint8_t dev_addr) +{ + (void) rhport; + (void) dev_addr; + // Set Address is automatically update by hw controller, nothing to do + + // Enable usbevent for suspend and resume detection + // Since the bus signal D+/D- are stable now. + + // Clear current pending first + NRF_USBD->EVENTCAUSE |= NRF_USBD->EVENTCAUSE; + NRF_USBD->EVENTS_USBEVENT = 0; + + NRF_USBD->INTENSET = USBD_INTEN_USBEVENT_Msk; +} + +void dcd_remote_wakeup(uint8_t rhport) +{ + (void) rhport; + + // Bring controller out of low power mode + // will start wakeup when USBWUALLOWED is set + NRF_USBD->LOWPOWER = 0; +} + +// disconnect by disabling internal pull-up resistor on D+/D- +void dcd_disconnect(uint8_t rhport) +{ + (void) rhport; + NRF_USBD->USBPULLUP = 0; + + // Disable Pull-up does not trigger Power USB Removed, in fact it have no + // impact on the USB Power status at all -> need to submit unplugged event to the stack. + dcd_event_bus_signal(0, DCD_EVENT_UNPLUGGED, false); +} + +// connect by enabling internal pull-up resistor on D+/D- +void dcd_connect(uint8_t rhport) +{ + (void) rhport; + NRF_USBD->USBPULLUP = 1; +} + +//--------------------------------------------------------------------+ +// Endpoint API +//--------------------------------------------------------------------+ +bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt) +{ + (void) rhport; + + uint8_t const epnum = tu_edpt_number(desc_edpt->bEndpointAddress); + uint8_t const dir = tu_edpt_dir(desc_edpt->bEndpointAddress); + + _dcd.xfer[epnum][dir].mps = desc_edpt->wMaxPacketSize.size; + + if (desc_edpt->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS) + { + if (dir == TUSB_DIR_OUT) + { + NRF_USBD->INTENSET = TU_BIT(USBD_INTEN_ENDEPOUT0_Pos + epnum); + NRF_USBD->EPOUTEN |= TU_BIT(epnum); + + // Write any value to SIZE register will allow nRF to ACK/accept data + NRF_USBD->SIZE.EPOUT[epnum] = 0; + }else + { + NRF_USBD->INTENSET = TU_BIT(USBD_INTEN_ENDEPIN0_Pos + epnum); + NRF_USBD->EPINEN |= TU_BIT(epnum); + } + } + else + { + TU_ASSERT(epnum == EP_ISO_NUM); + if (dir == TUSB_DIR_OUT) + { + // SPLIT ISO buffer when ISO IN endpoint is already opened. + if (_dcd.xfer[EP_ISO_NUM][TUSB_DIR_IN].mps) NRF_USBD->ISOSPLIT = USBD_ISOSPLIT_SPLIT_HalfIN; + + // Clear old events + NRF_USBD->EVENTS_ENDISOOUT = 0; + + // Clear SOF event in case interrupt was not enabled yet. + if ((NRF_USBD->INTEN & USBD_INTEN_SOF_Msk) == 0) NRF_USBD->EVENTS_SOF = 0; + + // Enable SOF and ISOOUT interrupts, and ISOOUT endpoint. + NRF_USBD->INTENSET = USBD_INTENSET_ENDISOOUT_Msk | USBD_INTENSET_SOF_Msk; + NRF_USBD->EPOUTEN |= USBD_EPOUTEN_ISOOUT_Msk; + } + else + { + NRF_USBD->EVENTS_ENDISOIN = 0; + + // SPLIT ISO buffer when ISO OUT endpoint is already opened. + if (_dcd.xfer[EP_ISO_NUM][TUSB_DIR_OUT].mps) NRF_USBD->ISOSPLIT = USBD_ISOSPLIT_SPLIT_HalfIN; + + // Clear SOF event in case interrupt was not enabled yet. + if ((NRF_USBD->INTEN & USBD_INTEN_SOF_Msk) == 0) NRF_USBD->EVENTS_SOF = 0; + + // Enable SOF and ISOIN interrupts, and ISOIN endpoint. + NRF_USBD->INTENSET = USBD_INTENSET_ENDISOIN_Msk | USBD_INTENSET_SOF_Msk; + NRF_USBD->EPINEN |= USBD_EPINEN_ISOIN_Msk; + } + } + __ISB(); __DSB(); + + return true; +} + +void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr) +{ + (void) rhport; + + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + + if (epnum != EP_ISO_NUM) + { + // CBI + if (dir == TUSB_DIR_OUT) + { + NRF_USBD->INTENCLR = TU_BIT(USBD_INTEN_ENDEPOUT0_Pos + epnum); + NRF_USBD->EPOUTEN &= ~TU_BIT(epnum); + } + else + { + NRF_USBD->INTENCLR = TU_BIT(USBD_INTEN_ENDEPIN0_Pos + epnum); + NRF_USBD->EPINEN &= ~TU_BIT(epnum); + } + } + else + { + _dcd.xfer[EP_ISO_NUM][dir].mps = 0; + // ISO + if (dir == TUSB_DIR_OUT) + { + NRF_USBD->INTENCLR = USBD_INTENCLR_ENDISOOUT_Msk; + NRF_USBD->EPOUTEN &= ~USBD_EPOUTEN_ISOOUT_Msk; + NRF_USBD->EVENTS_ENDISOOUT = 0; + } + else + { + NRF_USBD->INTENCLR = USBD_INTENCLR_ENDISOIN_Msk; + NRF_USBD->EPINEN &= ~USBD_EPINEN_ISOIN_Msk; + } + // One of the ISO endpoints closed, no need to split buffers any more. + NRF_USBD->ISOSPLIT = USBD_ISOSPLIT_SPLIT_OneDir; + // When both ISO endpoint are close there is no need for SOF any more. + if (_dcd.xfer[EP_ISO_NUM][TUSB_DIR_IN].mps + _dcd.xfer[EP_ISO_NUM][TUSB_DIR_OUT].mps == 0) NRF_USBD->INTENCLR = USBD_INTENCLR_SOF_Msk; + } + __ISB(); __DSB(); +} + +bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) +{ + (void) rhport; + + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + + xfer_td_t* xfer = get_td(epnum, dir); + + xfer->buffer = buffer; + xfer->total_len = total_bytes; + xfer->actual_len = 0; + + // Control endpoint with zero-length packet and opposite direction to 1st request byte --> status stage + bool const control_status = (epnum == 0 && total_bytes == 0 && dir != tu_edpt_dir(NRF_USBD->BMREQUESTTYPE)); + + if ( control_status ) + { + // Status Phase also requires EasyDMA has to be available as well !!!! + start_ep0_task(&NRF_USBD->TASKS_EP0STATUS); + + // The nRF doesn't interrupt on status transmit so we queue up a success response. + dcd_event_xfer_complete(0, ep_addr, 0, XFER_RESULT_SUCCESS, is_in_isr()); + } + else if ( dir == TUSB_DIR_OUT ) + { + if ( epnum == 0 ) + { + // Accept next Control Out packet. TASKS_EP0RCVOUT also require EasyDMA + start_ep0_task(&NRF_USBD->TASKS_EP0RCVOUT); + }else + { + if ( xfer->data_received ) + { + // Data may already be received previously + xfer->data_received = false; + + // start DMA to copy to SRAM + xact_out_dma(epnum); + } + else + { + // nRF auto accept next Bulk/Interrupt OUT packet + // nothing to do + } + } + } + else + { + // Start DMA to copy data from RAM -> Endpoint + xact_in_dma(epnum); + } + + return true; +} + +void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr) +{ + (void) rhport; + uint8_t const epnum = tu_edpt_number(ep_addr); + + if ( epnum == 0 ) + { + NRF_USBD->TASKS_EP0STALL = 1; + }else if (epnum != EP_ISO_NUM) + { + NRF_USBD->EPSTALL = (USBD_EPSTALL_STALL_Stall << USBD_EPSTALL_STALL_Pos) | ep_addr; + } + + __ISB(); __DSB(); +} + +void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr) +{ + (void) rhport; + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + + if ( epnum != 0 && epnum != EP_ISO_NUM ) + { + // clear stall + NRF_USBD->EPSTALL = (USBD_EPSTALL_STALL_UnStall << USBD_EPSTALL_STALL_Pos) | ep_addr; + + // reset data toggle to DATA0 + NRF_USBD->DTOGGLE = (USBD_DTOGGLE_VALUE_Data0 << USBD_DTOGGLE_VALUE_Pos) | ep_addr; + + // Write any value to SIZE register will allow nRF to ACK/accept data + // Drop any pending data + if (dir == TUSB_DIR_OUT) NRF_USBD->SIZE.EPOUT[epnum] = 0; + + __ISB(); __DSB(); + } +} + +/*------------------------------------------------------------------*/ +/* Interrupt Handler + *------------------------------------------------------------------*/ +void bus_reset(void) +{ + // 6.35.6 USB controller automatically disabled all endpoints (except control) + // i.e EPOUTEN and EPINEN and reset USBADDR to 0 + for(int i=0; i<8; i++) + { + NRF_USBD->TASKS_STARTEPIN[i] = 0; + NRF_USBD->TASKS_STARTEPOUT[i] = 0; + } + + NRF_USBD->TASKS_STARTISOIN = 0; + NRF_USBD->TASKS_STARTISOOUT = 0; + + // Clear USB Event Interrupt + NRF_USBD->EVENTS_USBEVENT = 0; + NRF_USBD->EVENTCAUSE |= NRF_USBD->EVENTCAUSE; + + // Reset interrupt + NRF_USBD->INTENCLR = NRF_USBD->INTEN; + NRF_USBD->INTENSET = USBD_INTEN_USBRESET_Msk | USBD_INTEN_USBEVENT_Msk | USBD_INTEN_EPDATA_Msk | + USBD_INTEN_EP0SETUP_Msk | USBD_INTEN_EP0DATADONE_Msk | USBD_INTEN_ENDEPIN0_Msk | USBD_INTEN_ENDEPOUT0_Msk; + + tu_varclr(&_dcd); + _dcd.xfer[0][TUSB_DIR_IN].mps = MAX_PACKET_SIZE; + _dcd.xfer[0][TUSB_DIR_OUT].mps = MAX_PACKET_SIZE; +} + +void dcd_int_handler(uint8_t rhport) +{ + (void) rhport; + + uint32_t const inten = NRF_USBD->INTEN; + uint32_t int_status = 0; + + volatile uint32_t* regevt = &NRF_USBD->EVENTS_USBRESET; + + for(uint8_t i=0; iactual_len = NRF_USBD->ISOIN.AMOUNT; + // Data transferred from RAM to endpoint output buffer. + // Next transfer can be scheduled after SOF. + xfer->iso_in_transfer_ready = true; + } + + if ( int_status & USBD_INTEN_SOF_Msk ) + { + bool iso_enabled = false; + + // ISOOUT: Transfer data gathered in previous frame from buffer to RAM + if (NRF_USBD->EPOUTEN & USBD_EPOUTEN_ISOOUT_Msk) + { + iso_enabled = true; + xact_out_dma(EP_ISO_NUM); + } + + // ISOIN: Notify client that data was transferred + if (NRF_USBD->EPINEN & USBD_EPINEN_ISOIN_Msk) + { + iso_enabled = true; + + xfer_td_t* xfer = get_td(EP_ISO_NUM, TUSB_DIR_IN); + if ( xfer->iso_in_transfer_ready ) + { + xfer->iso_in_transfer_ready = false; + dcd_event_xfer_complete(0, EP_ISO_NUM | TUSB_DIR_IN_MASK, xfer->actual_len, XFER_RESULT_SUCCESS, true); + } + } + + if ( !iso_enabled ) + { + // ISO endpoint is not used, SOF is only enabled one-time for remote wakeup + // so we disable it now + NRF_USBD->INTENCLR = USBD_INTENSET_SOF_Msk; + } + + dcd_event_bus_signal(0, DCD_EVENT_SOF, true); + } + + if ( int_status & USBD_INTEN_USBEVENT_Msk ) + { + TU_LOG(2, "EVENTCAUSE = 0x%04lX\r\n", NRF_USBD->EVENTCAUSE); + + enum { EVT_CAUSE_MASK = USBD_EVENTCAUSE_SUSPEND_Msk | USBD_EVENTCAUSE_RESUME_Msk | USBD_EVENTCAUSE_USBWUALLOWED_Msk }; + uint32_t const evt_cause = NRF_USBD->EVENTCAUSE & EVT_CAUSE_MASK; + NRF_USBD->EVENTCAUSE = evt_cause; // clear interrupt + + if ( evt_cause & USBD_EVENTCAUSE_SUSPEND_Msk ) + { + // Put controller into low power mode + // Leave HFXO disable to application, since it may be used by other peripherals + NRF_USBD->LOWPOWER = 1; + + dcd_event_bus_signal(0, DCD_EVENT_SUSPEND, true); + } + + if ( evt_cause & USBD_EVENTCAUSE_USBWUALLOWED_Msk ) + { + // USB is out of low power mode, and wakeup is allowed + // Initiate RESUME signal + NRF_USBD->DPDMVALUE = USBD_DPDMVALUE_STATE_Resume; + NRF_USBD->TASKS_DPDMDRIVE = 1; + + // There is no Resume interrupt for remote wakeup, enable SOF for to report bus ready state + // Clear SOF event in case interrupt was not enabled yet. + if ((NRF_USBD->INTEN & USBD_INTEN_SOF_Msk) == 0) NRF_USBD->EVENTS_SOF = 0; + NRF_USBD->INTENSET = USBD_INTENSET_SOF_Msk; + } + + if ( evt_cause & USBD_EVENTCAUSE_RESUME_Msk ) + { + dcd_event_bus_signal(0, DCD_EVENT_RESUME, true); + } + } + + // Setup tokens are specific to the Control endpoint. + if ( int_status & USBD_INTEN_EP0SETUP_Msk ) + { + uint8_t const setup[8] = + { + NRF_USBD->BMREQUESTTYPE , NRF_USBD->BREQUEST, NRF_USBD->WVALUEL , NRF_USBD->WVALUEH, + NRF_USBD->WINDEXL , NRF_USBD->WINDEXH , NRF_USBD->WLENGTHL, NRF_USBD->WLENGTHH + }; + + // nrf5x hw auto handle set address, there is no need to inform usb stack + tusb_control_request_t const * request = (tusb_control_request_t const *) setup; + + if ( !(TUSB_REQ_RCPT_DEVICE == request->bmRequestType_bit.recipient && + TUSB_REQ_TYPE_STANDARD == request->bmRequestType_bit.type && + TUSB_REQ_SET_ADDRESS == request->bRequest) ) + { + dcd_event_setup_received(0, setup, true); + } + } + + if ( int_status & EDPT_END_ALL_MASK ) + { + // DMA complete move data from SRAM -> Endpoint + edpt_dma_end(); + } + + //--------------------------------------------------------------------+ + /* Control/Bulk/Interrupt (CBI) Transfer + * + * Data flow is: + * (bus) (dma) + * Host <-------> Endpoint <-------> RAM + * + * For CBI OUT: + * - Host -> Endpoint + * EPDATA (or EP0DATADONE) interrupted, check EPDATASTATUS.EPOUT[i] + * to start DMA. For Bulk/Interrupt, this step can occur automatically (without sw), + * which means data may or may not be ready (data_received flag). + * - Endpoint -> RAM + * ENDEPOUT[i] interrupted, transaction complete, sw prepare next transaction + * + * For CBI IN: + * - RAM -> Endpoint + * ENDEPIN[i] interrupted indicate DMA is complete. HW will start + * to move data to host + * - Endpoint -> Host + * EPDATA (or EP0DATADONE) interrupted, check EPDATASTATUS.EPIN[i]. + * Transaction is complete, sw prepare next transaction + * + * Note: in both Control In and Out of Data stage from Host <-> Endpoint + * EP0DATADONE will be set as interrupt source + */ + //--------------------------------------------------------------------+ + + /* CBI OUT: Endpoint -> SRAM (aka transaction complete) + * Note: Since nRF controller auto ACK next packet without SW awareness + * We must handle this stage before Host -> Endpoint just in case 2 event happens at once + * + * ISO OUT: Transaction must fit in single packet, it can be shorter then total + * len if Host decides to sent fewer bytes, it this case transaction is also + * complete and next transfer is not initiated here like for CBI. + */ + for(uint8_t epnum=0; epnumEPOUT[epnum].AMOUNT; + + // Transfer complete if transaction len < Max Packet Size or total len is transferred + if ( (epnum != EP_ISO_NUM) && (xact_len == xfer->mps) && (xfer->actual_len < xfer->total_len) ) + { + if ( epnum == 0 ) + { + // Accept next Control Out packet. TASKS_EP0RCVOUT also require EasyDMA + if ( _dcd.dma_pending ) + { + // use usbd task to defer later + usbd_defer_func( (osal_task_func_t) start_ep0_task, (void*) &NRF_USBD->TASKS_EP0RCVOUT, true ); + }else + { + start_ep0_task(&NRF_USBD->TASKS_EP0RCVOUT); + } + }else + { + // nRF auto accept next Bulk/Interrupt OUT packet + // nothing to do + } + }else + { + xfer->total_len = xfer->actual_len; + + // CBI OUT complete + dcd_event_xfer_complete(0, epnum, xfer->actual_len, XFER_RESULT_SUCCESS, true); + } + } + + // Ended event for CBI IN : nothing to do + } + + // Endpoint <-> Host ( In & OUT ) + if ( int_status & (USBD_INTEN_EPDATA_Msk | USBD_INTEN_EP0DATADONE_Msk) ) + { + uint32_t data_status = NRF_USBD->EPDATASTATUS; + NRF_USBD->EPDATASTATUS = data_status; + __ISB(); __DSB(); + + // EP0DATADONE is set with either Control Out on IN Data + // Since EPDATASTATUS cannot be used to determine whether it is control OUT or IN. + // We will use BMREQUESTTYPE in setup packet to determine the direction + bool const is_control_in = (int_status & USBD_INTEN_EP0DATADONE_Msk) && (NRF_USBD->BMREQUESTTYPE & TUSB_DIR_IN_MASK); + bool const is_control_out = (int_status & USBD_INTEN_EP0DATADONE_Msk) && !(NRF_USBD->BMREQUESTTYPE & TUSB_DIR_IN_MASK); + + // CBI In: Endpoint -> Host (transaction complete) + for(uint8_t epnum=0; epnumactual_len += NRF_USBD->EPIN[epnum].MAXCNT; + + if ( xfer->actual_len < xfer->total_len ) + { + // Start DMA to copy next data packet + xact_in_dma(epnum); + } else + { + // CBI IN complete + dcd_event_xfer_complete(0, epnum | TUSB_DIR_IN_MASK, xfer->actual_len, XFER_RESULT_SUCCESS, true); + } + } + } + + // CBI OUT: Host -> Endpoint + for(uint8_t epnum=0; epnumactual_len < xfer->total_len) + { + xact_out_dma(epnum); + }else + { + // Data overflow !!! Nah, nRF will auto accept next Bulk/Interrupt OUT packet + // Mark this endpoint with data received + xfer->data_received = true; + } + } + } + } +} + +//--------------------------------------------------------------------+ +// HFCLK helper +//--------------------------------------------------------------------+ +#ifdef SOFTDEVICE_PRESENT + +// For enable/disable hfclk with SoftDevice +#include "nrf_mbr.h" +#include "nrf_sdm.h" +#include "nrf_soc.h" + +#ifndef SD_MAGIC_NUMBER + #define SD_MAGIC_NUMBER 0x51B1E5DB +#endif + +static inline bool is_sd_existed(void) +{ + return *((uint32_t*)(SOFTDEVICE_INFO_STRUCT_ADDRESS+4)) == SD_MAGIC_NUMBER; +} + +// check if SD is existed and enabled +static inline bool is_sd_enabled(void) +{ + if ( !is_sd_existed() ) return false; + + uint8_t sd_en = false; + (void) sd_softdevice_is_enabled(&sd_en); + return sd_en; +} +#endif + +static bool hfclk_running(void) +{ +#ifdef SOFTDEVICE_PRESENT + if ( is_sd_enabled() ) + { + uint32_t is_running = 0; + (void) sd_clock_hfclk_is_running(&is_running); + return (is_running ? true : false); + } +#endif + + return nrf_clock_hf_is_running(NRF_CLOCK, NRF_CLOCK_HFCLK_HIGH_ACCURACY); +} + +static void hfclk_enable(void) +{ + // already running, nothing to do + if ( hfclk_running() ) return; + +#ifdef SOFTDEVICE_PRESENT + if ( is_sd_enabled() ) + { + (void)sd_clock_hfclk_request(); + return; + } +#endif + + nrf_clock_event_clear(NRF_CLOCK, NRF_CLOCK_EVENT_HFCLKSTARTED); + nrf_clock_task_trigger(NRF_CLOCK, NRF_CLOCK_TASK_HFCLKSTART); +} + +static void hfclk_disable(void) +{ +#ifdef SOFTDEVICE_PRESENT + if ( is_sd_enabled() ) + { + (void)sd_clock_hfclk_release(); + return; + } +#endif + + nrf_clock_task_trigger(NRF_CLOCK, NRF_CLOCK_TASK_HFCLKSTOP); +} + +// Power & Clock Peripheral on nRF5x to manage USB +// +// USB Bus power is managed by Power module, there are 3 VBUS power events: +// Detected, Ready, Removed. Upon these power events, This function will +// enable ( or disable ) usb & hfclk peripheral, set the usb pin pull up +// accordingly to the controller Startup/Standby Sequence in USBD 51.4 specs. +// +// Therefore this function must be called to handle USB power event by +// - nrfx_power_usbevt_init() : if Softdevice is not used or enabled +// - SoftDevice SOC event : if SD is used and enabled +void tusb_hal_nrf_power_event (uint32_t event) +{ + // Value is chosen to be as same as NRFX_POWER_USB_EVT_* in nrfx_power.h + enum { + USB_EVT_DETECTED = 0, + USB_EVT_REMOVED = 1, + USB_EVT_READY = 2 + }; + +#if CFG_TUSB_DEBUG >= 2 + const char* const power_evt_str[] = { "Detected", "Removed", "Ready" }; + TU_LOG(2, "Power USB event: %s\r\n", power_evt_str[event]); +#endif + + switch ( event ) + { + case USB_EVT_DETECTED: + if ( !NRF_USBD->ENABLE ) + { + // Prepare for receiving READY event: disable interrupt since we will blocking wait + NRF_USBD->INTENCLR = USBD_INTEN_USBEVENT_Msk; + NRF_USBD->EVENTCAUSE = USBD_EVENTCAUSE_READY_Msk; + __ISB(); __DSB(); // for sync + +#ifdef NRF52_SERIES // NRF53 does not need this errata + // ERRATA 171, 187, 166 + if ( nrfx_usbd_errata_187() ) + { + // CRITICAL_REGION_ENTER(); + if ( *((volatile uint32_t *) (0x4006EC00)) == 0x00000000 ) + { + *((volatile uint32_t *) (0x4006EC00)) = 0x00009375; + *((volatile uint32_t *) (0x4006ED14)) = 0x00000003; + *((volatile uint32_t *) (0x4006EC00)) = 0x00009375; + } + else + { + *((volatile uint32_t *) (0x4006ED14)) = 0x00000003; + } + // CRITICAL_REGION_EXIT(); + } + + if ( nrfx_usbd_errata_171() ) + { + // CRITICAL_REGION_ENTER(); + if ( *((volatile uint32_t *) (0x4006EC00)) == 0x00000000 ) + { + *((volatile uint32_t *) (0x4006EC00)) = 0x00009375; + *((volatile uint32_t *) (0x4006EC14)) = 0x000000C0; + *((volatile uint32_t *) (0x4006EC00)) = 0x00009375; + } + else + { + *((volatile uint32_t *) (0x4006EC14)) = 0x000000C0; + } + // CRITICAL_REGION_EXIT(); + } +#endif + + // Enable the peripheral (will cause Ready event) + NRF_USBD->ENABLE = 1; + __ISB(); __DSB(); // for sync + + // Enable HFCLK + hfclk_enable(); + } + break; + + case USB_EVT_READY: + // Skip if pull-up is enabled and HCLK is already running. + // Application probably call this more than necessary. + if ( NRF_USBD->USBPULLUP && hfclk_running() ) break; + + // Waiting for USBD peripheral enabled + while ( !(USBD_EVENTCAUSE_READY_Msk & NRF_USBD->EVENTCAUSE) ) { } + + NRF_USBD->EVENTCAUSE = USBD_EVENTCAUSE_READY_Msk; + __ISB(); __DSB(); // for sync + +#ifdef NRF52_SERIES + if ( nrfx_usbd_errata_171() ) + { + // CRITICAL_REGION_ENTER(); + if ( *((volatile uint32_t *) (0x4006EC00)) == 0x00000000 ) + { + *((volatile uint32_t *) (0x4006EC00)) = 0x00009375; + *((volatile uint32_t *) (0x4006EC14)) = 0x00000000; + *((volatile uint32_t *) (0x4006EC00)) = 0x00009375; + } + else + { + *((volatile uint32_t *) (0x4006EC14)) = 0x00000000; + } + + // CRITICAL_REGION_EXIT(); + } + + if ( nrfx_usbd_errata_187() ) + { + // CRITICAL_REGION_ENTER(); + if ( *((volatile uint32_t *) (0x4006EC00)) == 0x00000000 ) + { + *((volatile uint32_t *) (0x4006EC00)) = 0x00009375; + *((volatile uint32_t *) (0x4006ED14)) = 0x00000000; + *((volatile uint32_t *) (0x4006EC00)) = 0x00009375; + } + else + { + *((volatile uint32_t *) (0x4006ED14)) = 0x00000000; + } + // CRITICAL_REGION_EXIT(); + } + + if ( nrfx_usbd_errata_166() ) + { + *((volatile uint32_t *) (NRF_USBD_BASE + 0x800)) = 0x7E3; + *((volatile uint32_t *) (NRF_USBD_BASE + 0x804)) = 0x40; + + __ISB(); __DSB(); + } +#endif + + // ISO buffer Lower half for IN, upper half for OUT + NRF_USBD->ISOSPLIT = USBD_ISOSPLIT_SPLIT_HalfIN; + + // Enable bus-reset interrupt + NRF_USBD->INTENSET = USBD_INTEN_USBRESET_Msk; + + // Enable interrupt, priorities should be set by application + NVIC_ClearPendingIRQ(USBD_IRQn); + NVIC_EnableIRQ(USBD_IRQn); + + // Wait for HFCLK + while ( !hfclk_running() ) { } + + // Enable pull up + NRF_USBD->USBPULLUP = 1; + __ISB(); __DSB(); // for sync + break; + + case USB_EVT_REMOVED: + if ( NRF_USBD->ENABLE ) + { + // Abort all transfers + + // Disable pull up + NRF_USBD->USBPULLUP = 0; + __ISB(); __DSB(); // for sync + + // Disable Interrupt + NVIC_DisableIRQ(USBD_IRQn); + + // disable all interrupt + NRF_USBD->INTENCLR = NRF_USBD->INTEN; + + NRF_USBD->ENABLE = 0; + __ISB(); __DSB(); // for sync + + hfclk_disable(); + + dcd_event_bus_signal(0, DCD_EVENT_UNPLUGGED, is_in_isr()); + } + break; + + default: break; + } +} + +#endif -- cgit v1.2.3