From cd935193e30ba3a44d3fc19d1147859fd9a5b1ed Mon Sep 17 00:00:00 2001 From: Joey Castillo Date: Mon, 13 Sep 2021 13:21:33 -0400 Subject: remove unused ASF code --- watch-library/hal/include/hal_adc_sync.h | 277 ------------------------------- 1 file changed, 277 deletions(-) delete mode 100644 watch-library/hal/include/hal_adc_sync.h (limited to 'watch-library/hal/include/hal_adc_sync.h') diff --git a/watch-library/hal/include/hal_adc_sync.h b/watch-library/hal/include/hal_adc_sync.h deleted file mode 100644 index 1b66e3df..00000000 --- a/watch-library/hal/include/hal_adc_sync.h +++ /dev/null @@ -1,277 +0,0 @@ -/** - * \file - * - * \brief ADC functionality declaration. - * - * Copyright (c) 2014-2018 Microchip Technology Inc. and its subsidiaries. - * - * \asf_license_start - * - * \page License - * - * Subject to your compliance with these terms, you may use Microchip - * software and any derivatives exclusively with Microchip products. - * It is your responsibility to comply with third party license terms applicable - * to your use of third party software (including open source software) that - * may accompany Microchip software. - * - * THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES, - * WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE, - * INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, - * AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP BE - * LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL - * LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE - * SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE - * POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO THE FULLEST EXTENT - * ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY - * RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY, - * THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE. - * - * \asf_license_stop - * - */ - -#ifndef _HAL_ADC_SYNC_H_INCLUDED -#define _HAL_ADC_SYNC_H_INCLUDED - -#include - -#ifdef __cplusplus -extern "C" { -#endif - -/** - * \addtogroup doc_driver_hal_adc_sync - * - * @{ - */ - -/** - * \brief ADC descriptor - * - * The ADC descriptor forward declaration. - */ -struct adc_sync_descriptor; - -/** - * \brief ADC descriptor - */ -struct adc_sync_descriptor { - /** ADC device */ - struct _adc_sync_device device; -}; - -/** - * \brief Initialize ADC - * - * This function initializes the given ADC descriptor. - * It checks if the given hardware is not initialized and if the given hardware - * is permitted to be initialized. - * - * \param[out] descr An ADC descriptor to initialize - * \param[in] hw The pointer to hardware instance - * \param[in] func The pointer to a set of functions pointers - * - * \return Initialization status. - */ -int32_t adc_sync_init(struct adc_sync_descriptor *const descr, void *const hw, void *const func); - -/** - * \brief Deinitialize ADC - * - * This function deinitializes the given ADC descriptor. - * It checks if the given hardware is initialized and if the given hardware is - * permitted to be deinitialized. - * - * \param[in] descr An ADC descriptor to deinitialize - * - * \return De-initialization status. - */ -int32_t adc_sync_deinit(struct adc_sync_descriptor *const descr); - -/** - * \brief Enable ADC - * - * Use this function to set the ADC peripheral to enabled state. - * - * \param[in] descr Pointer to the ADC descriptor - * \param[in] channel Channel number - * - * \return Operation status - * - */ -int32_t adc_sync_enable_channel(struct adc_sync_descriptor *const descr, const uint8_t channel); - -/** - * \brief Disable ADC - * - * Use this function to set the ADC peripheral to disabled state. - * - * \param[in] descr Pointer to the ADC descriptor - * \param[in] channel Channel number - * - * \return Operation status - * - */ -int32_t adc_sync_disable_channel(struct adc_sync_descriptor *const descr, const uint8_t channel); - -/** - * \brief Read data from ADC - * - * \param[in] descr The pointer to the ADC descriptor - * \param[in] channel Channel number - * \param[in] buf A buffer to read data to - * \param[in] length The size of a buffer - * - * \return The number of bytes read. - */ -int32_t adc_sync_read_channel(struct adc_sync_descriptor *const descr, const uint8_t channel, uint8_t *const buffer, - const uint16_t length); - -/** - * \brief Set ADC reference source - * - * This function sets ADC reference source. - * - * \param[in] descr The pointer to the ADC descriptor - * \param[in] reference A reference source to set - * - * \return Status of the ADC reference source setting. - */ -int32_t adc_sync_set_reference(struct adc_sync_descriptor *const descr, const adc_reference_t reference); - -/** - * \brief Set ADC resolution - * - * This function sets ADC resolution. - * - * \param[in] descr The pointer to the ADC descriptor - * \param[in] resolution A resolution to set - * - * \return Status of the ADC resolution setting. - */ -int32_t adc_sync_set_resolution(struct adc_sync_descriptor *const descr, const adc_resolution_t resolution); - -/** - * \brief Set ADC input source of a channel - * - * This function sets ADC positive and negative input sources. - * - * \param[in] descr The pointer to the ADC descriptor - * \param[in] pos_input A positive input source to set - * \param[in] neg_input A negative input source to set - * \param[in] channel Channel number - * - * \return Status of the ADC channels setting. - */ -int32_t adc_sync_set_inputs(struct adc_sync_descriptor *const descr, const adc_pos_input_t pos_input, - const adc_neg_input_t neg_input, const uint8_t channel); - -/** - * \brief Set ADC conversion mode - * - * This function sets ADC conversion mode. - * - * \param[in] descr The pointer to the ADC descriptor - * \param[in] mode A conversion mode to set - * - * \return Status of the ADC conversion mode setting. - */ -int32_t adc_sync_set_conversion_mode(struct adc_sync_descriptor *const descr, const enum adc_conversion_mode mode); - -/** - * \brief Set ADC differential mode - * - * This function sets ADC differential mode. - * - * \param[in] descr The pointer to the ADC descriptor - * \param[in] channel Channel number - * \param[in] mode A differential mode to set - * - * \return Status of the ADC differential mode setting. - */ -int32_t adc_sync_set_channel_differential_mode(struct adc_sync_descriptor *const descr, const uint8_t channel, - const enum adc_differential_mode mode); - -/** - * \brief Set ADC channel gain - * - * This function sets ADC channel gain. - * - * \param[in] descr The pointer to the ADC descriptor - * \param[in] channel Channel number - * \param[in] gain A gain to set - * - * \return Status of the ADC gain setting. - */ -int32_t adc_sync_set_channel_gain(struct adc_sync_descriptor *const descr, const uint8_t channel, - const adc_gain_t gain); - -/** - * \brief Set ADC window mode - * - * This function sets ADC window mode. - * - * \param[in] descr The pointer to the ADC descriptor - * \param[in] mode A window mode to set - * - * \return Status of the ADC window mode setting. - */ -int32_t adc_sync_set_window_mode(struct adc_sync_descriptor *const descr, const adc_window_mode_t mode); - -/** - * \brief Set ADC thresholds - * - * This function sets ADC positive and negative thresholds. - * - * \param[in] descr The pointer to the ADC descriptor - * \param[in] low_threshold A lower thresholds to set - * \param[in] up_threshold An upper thresholds to set - * - * \return Status of the ADC thresholds setting. - */ -int32_t adc_sync_set_thresholds(struct adc_sync_descriptor *const descr, const adc_threshold_t low_threshold, - const adc_threshold_t up_threshold); - -/** - * \brief Retrieve threshold state - * - * This function retrieves ADC threshold state. - * - * \param[in] descr The pointer to the ADC descriptor - * \param[out] state The threshold state - * - * \return The state of ADC thresholds state retrieving. - */ -int32_t adc_sync_get_threshold_state(const struct adc_sync_descriptor *const descr, - adc_threshold_status_t *const state); - -/** - * \brief Check if conversion is complete - * - * This function checks if the ADC has finished the conversion. - * - * \param[in] descr The pointer to the ADC descriptor - * \param[in] channel Channel number - * - * \return The status of ADC conversion completion checking. - * \retval 1 The conversion is complete - * \retval 0 The conversion is not complete - */ -int32_t adc_sync_is_channel_conversion_complete(const struct adc_sync_descriptor *const descr, const uint8_t channel); - -/** - * \brief Retrieve the current driver version - * - * \return Current driver version. - */ -uint32_t adc_sync_get_version(void); -/**@}*/ - -#ifdef __cplusplus -} -#endif - -#include - -#endif /* _HAL_ADC_SYNC_H_INCLUDED */ -- cgit v1.2.3