Add missing chconf.h

1 files changed, 499 insertions, 0 deletions

diff --git a/demos/NRF51/RT-WVSHARE_BLE400/chconf.h b/demos/NRF51/RT-WVSHARE_BLE400/chconf.h
new file mode 100644
index 0000000..3a71f34
--- /dev/null
+++ b/demos/NRF51/RT-WVSHARE_BLE400/chconf.h
@@ -0,0 +1,499 @@
+/*

+    ChibiOS - Copyright (C) 2015 Fabio Utzig

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+/**

+ * @file    templates/chconf.h

+ * @brief   Configuration file template.

+ * @details A copy of this file must be placed in each project directory, it

+ *          contains the application specific kernel settings.

+ *

+ * @addtogroup config

+ * @details Kernel related settings and hooks.

+ * @{

+ */

+

+#ifndef _CHCONF_H_

+#define _CHCONF_H_

+

+/*===========================================================================*/

+/**

+ * @name System timers settings

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   System time counter resolution.

+ * @note    Allowed values are 16 or 32 bits.

+ */

+#define CH_CFG_ST_RESOLUTION                32

+

+/**

+ * @brief   System tick frequency.

+ * @details Frequency of the system timer that drives the system ticks. This

+ *          setting also defines the system tick time unit.

+ */

+#define CH_CFG_ST_FREQUENCY                 1000

+

+/**

+ * @brief   Time delta constant for the tick-less mode.

+ * @note    If this value is zero then the system uses the classic

+ *          periodic tick. This value represents the minimum number

+ *          of ticks that is safe to specify in a timeout directive.

+ *          The value one is not valid, timeouts are rounded up to

+ *          this value.

+ */

+#define CH_CFG_ST_TIMEDELTA                 0

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Kernel parameters and options

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   Round robin interval.

+ * @details This constant is the number of system ticks allowed for the

+ *          threads before preemption occurs. Setting this value to zero

+ *          disables the preemption for threads with equal priority and the

+ *          round robin becomes cooperative. Note that higher priority

+ *          threads can still preempt, the kernel is always preemptive.

+ * @note    Disabling the round robin preemption makes the kernel more compact

+ *          and generally faster.

+ * @note    The round robin preemption is not supported in tickless mode and

+ *          must be set to zero in that case.

+ */

+#define CH_CFG_TIME_QUANTUM                 20

+

+/**

+ * @brief   Managed RAM size.

+ * @details Size of the RAM area to be managed by the OS. If set to zero

+ *          then the whole available RAM is used. The core memory is made

+ *          available to the heap allocator and/or can be used directly through

+ *          the simplified core memory allocator.

+ *

+ * @note    In order to let the OS manage the whole RAM the linker script must

+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.

+ * @note    Requires @p CH_CFG_USE_MEMCORE.

+ */

+#define CH_CFG_MEMCORE_SIZE                 0

+

+/**

+ * @brief   Idle thread automatic spawn suppression.

+ * @details When this option is activated the function @p chSysInit()

+ *          does not spawn the idle thread. The application @p main()

+ *          function becomes the idle thread and must implement an

+ *          infinite loop.

+ */

+#define CH_CFG_NO_IDLE_THREAD               FALSE

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Performance options

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   OS optimization.

+ * @details If enabled then time efficient rather than space efficient code

+ *          is used when two possible implementations exist.

+ *

+ * @note    This is not related to the compiler optimization options.

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_OPTIMIZE_SPEED               TRUE

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Subsystem options

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   Time Measurement APIs.

+ * @details If enabled then the time measurement APIs are included in

+ *          the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_TM                       FALSE

+

+/**

+ * @brief   Threads registry APIs.

+ * @details If enabled then the registry APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_REGISTRY                 TRUE

+

+/**

+ * @brief   Threads synchronization APIs.

+ * @details If enabled then the @p chThdWait() function is included in

+ *          the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_WAITEXIT                 TRUE

+

+/**

+ * @brief   Semaphores APIs.

+ * @details If enabled then the Semaphores APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_SEMAPHORES               TRUE

+

+/**

+ * @brief   Semaphores queuing mode.

+ * @details If enabled then the threads are enqueued on semaphores by

+ *          priority rather than in FIFO order.

+ *

+ * @note    The default is @p FALSE. Enable this if you have special

+ *          requirements.

+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.

+ */

+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE

+

+/**

+ * @brief   Mutexes APIs.

+ * @details If enabled then the mutexes APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_MUTEXES                  TRUE

+

+/**

+ * @brief   Enables recursive behavior on mutexes.

+ * @note    Recursive mutexes are heavier and have an increased

+ *          memory footprint.

+ *

+ * @note    The default is @p FALSE.

+ * @note    Requires @p CH_CFG_USE_MUTEXES.

+ */

+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE

+

+/**

+ * @brief   Conditional Variables APIs.

+ * @details If enabled then the conditional variables APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_MUTEXES.

+ */

+#define CH_CFG_USE_CONDVARS                 TRUE

+

+/**

+ * @brief   Conditional Variables APIs with timeout.

+ * @details If enabled then the conditional variables APIs with timeout

+ *          specification are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_CONDVARS.

+ */

+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE

+

+/**

+ * @brief   Events Flags APIs.

+ * @details If enabled then the event flags APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_EVENTS                   TRUE

+

+/**

+ * @brief   Events Flags APIs with timeout.

+ * @details If enabled then the events APIs with timeout specification

+ *          are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_EVENTS.

+ */

+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE

+

+/**

+ * @brief   Synchronous Messages APIs.

+ * @details If enabled then the synchronous messages APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_MESSAGES                 TRUE

+

+/**

+ * @brief   Synchronous Messages queuing mode.

+ * @details If enabled then messages are served by priority rather than in

+ *          FIFO order.

+ *

+ * @note    The default is @p FALSE. Enable this if you have special

+ *          requirements.

+ * @note    Requires @p CH_CFG_USE_MESSAGES.

+ */

+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE

+

+/**

+ * @brief   Mailboxes APIs.

+ * @details If enabled then the asynchronous messages (mailboxes) APIs are

+ *          included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.

+ */

+#define CH_CFG_USE_MAILBOXES                TRUE

+

+/**

+ * @brief   I/O Queues APIs.

+ * @details If enabled then the I/O queues APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_QUEUES                   TRUE

+

+/**

+ * @brief   Core Memory Manager APIs.

+ * @details If enabled then the core memory manager APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_MEMCORE                  TRUE

+

+/**

+ * @brief   Heap Allocator APIs.

+ * @details If enabled then the memory heap allocator APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or

+ *          @p CH_CFG_USE_SEMAPHORES.

+ * @note    Mutexes are recommended.

+ */

+#define CH_CFG_USE_HEAP                     TRUE

+

+/**

+ * @brief   Memory Pools Allocator APIs.

+ * @details If enabled then the memory pools allocator APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_MEMPOOLS                 TRUE

+

+/**

+ * @brief   Dynamic Threads APIs.

+ * @details If enabled then the dynamic threads creation APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_WAITEXIT.

+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.

+ */

+#define CH_CFG_USE_DYNAMIC                  TRUE

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Debug options

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   Debug option, kernel statistics.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_STATISTICS                   FALSE

+

+/**

+ * @brief   Debug option, system state check.

+ * @details If enabled the correct call protocol for system APIs is checked

+ *          at runtime.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE

+

+/**

+ * @brief   Debug option, parameters checks.

+ * @details If enabled then the checks on the API functions input

+ *          parameters are activated.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_ENABLE_CHECKS                FALSE

+

+/**

+ * @brief   Debug option, consistency checks.

+ * @details If enabled then all the assertions in the kernel code are

+ *          activated. This includes consistency checks inside the kernel,

+ *          runtime anomalies and port-defined checks.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_ENABLE_ASSERTS               FALSE

+

+/**

+ * @brief   Debug option, trace buffer.

+ * @details If enabled then the context switch circular trace buffer is

+ *          activated.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_ENABLE_TRACE                 FALSE

+

+/**

+ * @brief   Debug option, stack checks.

+ * @details If enabled then a runtime stack check is performed.

+ *

+ * @note    The default is @p FALSE.

+ * @note    The stack check is performed in a architecture/port dependent way.

+ *          It may not be implemented or some ports.

+ * @note    The default failure mode is to halt the system with the global

+ *          @p panic_msg variable set to @p NULL.

+ */

+#define CH_DBG_ENABLE_STACK_CHECK           FALSE

+

+/**

+ * @brief   Debug option, stacks initialization.

+ * @details If enabled then the threads working area is filled with a byte

+ *          value when a thread is created. This can be useful for the

+ *          runtime measurement of the used stack.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_FILL_THREADS                 FALSE

+

+/**

+ * @brief   Debug option, threads profiling.

+ * @details If enabled then a field is added to the @p thread_t structure that

+ *          counts the system ticks occurred while executing the thread.

+ *

+ * @note    The default is @p FALSE.

+ * @note    This debug option is not currently compatible with the

+ *          tickless mode.

+ */

+#define CH_DBG_THREADS_PROFILING            FALSE

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Kernel hooks

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   Threads descriptor structure extension.

+ * @details User fields added to the end of the @p thread_t structure.

+ */

+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \

+  /* Add threads custom fields here.*/

+

+/**

+ * @brief   Threads initialization hook.

+ * @details User initialization code added to the @p chThdInit() API.

+ *

+ * @note    It is invoked from within @p chThdInit() and implicitly from all

+ *          the threads creation APIs.

+ */

+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \

+  /* Add threads initialization code here.*/                                \

+}

+

+/**

+ * @brief   Threads finalization hook.

+ * @details User finalization code added to the @p chThdExit() API.

+ *

+ * @note    It is inserted into lock zone.

+ * @note    It is also invoked when the threads simply return in order to

+ *          terminate.

+ */

+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \

+  /* Add threads finalization code here.*/                                  \

+}

+

+/**

+ * @brief   Context switch hook.

+ * @details This hook is invoked just before switching between threads.

+ */

+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \

+  /* Context switch code here.*/                                            \

+}

+

+/**

+ * @brief   Idle thread enter hook.

+ * @note    This hook is invoked within a critical zone, no OS functions

+ *          should be invoked from here.

+ * @note    This macro can be used to activate a power saving mode.

+ */

+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \

+}

+

+/**

+ * @brief   Idle thread leave hook.

+ * @note    This hook is invoked within a critical zone, no OS functions

+ *          should be invoked from here.

+ * @note    This macro can be used to deactivate a power saving mode.

+ */

+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \

+}

+

+/**

+ * @brief   Idle Loop hook.

+ * @details This hook is continuously invoked by the idle thread loop.

+ */

+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \

+  /* Idle loop code here.*/                                                 \

+}

+

+/**

+ * @brief   System tick event hook.

+ * @details This hook is invoked in the system tick handler immediately

+ *          after processing the virtual timers queue.

+ */

+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \

+  /* System tick event code here.*/                                         \

+}

+

+/**

+ * @brief   System halt hook.

+ * @details This hook is invoked in case to a system halting error before

+ *          the system is halted.

+ */

+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \

+  /* System halt code here.*/                                               \

+}

+

+/** @} */

+

+/*===========================================================================*/

+/* Port-specific settings (override port settings defaulted in chcore.h).    */

+/*===========================================================================*/

+

+#endif  /* _CHCONF_H_ */

+

+/** @} */