diff options
| author | Konstantin K. Oblaukhov <oblaukhov.konstantin@gmail.com> | 2018-11-20 09:52:01 +0700 |
|---|---|---|
| committer | Konstantin K. Oblaukhov <oblaukhov.konstantin@gmail.com> | 2018-11-20 09:52:01 +0700 |
| commit | ca35947f8132f1879b2706ecceb82c112bfe0f71 (patch) | |
| tree | d35c00a3c15507fe0fb58ec2c78681f35b163254 /os/hal/ports/NRF5/LLD/hal_serial_lld.h | |
| parent | 1391af251d17e4d6256175fd1140d70e3eae8be4 (diff) | |
| download | ChibiOS-Contrib-ca35947f8132f1879b2706ecceb82c112bfe0f71.tar.gz ChibiOS-Contrib-ca35947f8132f1879b2706ecceb82c112bfe0f71.tar.bz2 ChibiOS-Contrib-ca35947f8132f1879b2706ecceb82c112bfe0f71.zip | |
Reorganize NRF5x driver files.
Diffstat (limited to 'os/hal/ports/NRF5/LLD/hal_serial_lld.h')
| -rw-r--r-- | os/hal/ports/NRF5/LLD/hal_serial_lld.h | 155 |
1 files changed, 0 insertions, 155 deletions
diff --git a/os/hal/ports/NRF5/LLD/hal_serial_lld.h b/os/hal/ports/NRF5/LLD/hal_serial_lld.h deleted file mode 100644 index 741a40a..0000000 --- a/os/hal/ports/NRF5/LLD/hal_serial_lld.h +++ /dev/null @@ -1,155 +0,0 @@ -/*
- Copyright (C) 2015 Fabio Utzig
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file NRF5/LLD/hal_serial_lld.h
- * @brief NRF5 serial subsystem low level driver header.
- *
- * @addtogroup SERIAL
- * @{
- */
-
-#ifndef HAL_SERIAL_LLD_H
-#define HAL_SERIAL_LLD_H
-
-#if (HAL_USE_SERIAL == TRUE) || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-/**
- * @name PLATFORM configuration options
- * @{
- */
-/**
- * @brief SD flow control enable switch.
- * @details If set to @p TRUE the support for hardware flow control
- * is included.
- * @note The default is @p FALSE.
- */
-#if !defined(NRF5_SERIAL_USE_HWFLOWCTRL) || defined(__DOXYGEN__)
-#define NRF5_SERIAL_USE_HWFLOWCTRL FALSE
-#endif
-
-/**
- * @brief SD1 driver enable switch.
- * @details If set to @p TRUE the support for SD1 is included.
- * @note The default is @p FALSE.
- */
-#if !defined(NRF5_SERIAL_USE_UART0) || defined(__DOXYGEN__)
-#define NRF5_SERIAL_USE_UART0 FALSE
-#endif
-
-/**
- * @brief UART0 interrupt priority level setting.
- */
-#if !defined(NRF5_SERIAL_UART0_PRIORITY) || defined(__DOXYGEN__)
-#define NRF5_SERIAL_UART0_PRIORITY 3
-#endif
-
-/* Value indicating that no pad is connected to this UART register. */
-#define NRF5_SERIAL_PAD_DISCONNECTED 0xFFFFFFFFU
-#define NRF5_SERIAL_INVALID_BAUDRATE 0xFFFFFFFFU
-
-/** @} */
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-#if NRF5_SERIAL_USE_UART0 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF5_SERIAL_UART0_PRIORITY)
-#error "Invalid IRQ priority assigned to UART0"
-#endif
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/**
- * @brief NRF51 Serial Driver configuration structure.
- * @details An instance of this structure must be passed to @p sdStart()
- * in order to configure and start a serial driver operations.
- * @note This structure content is architecture dependent, each driver
- * implementation defines its own version and the custom static
- * initializers.
- */
-typedef struct {
- /**
- * @brief Bit rate.
- */
- uint32_t speed;
- /* End of the mandatory fields.*/
- uint32_t tx_pad;
- uint32_t rx_pad;
-#if (NRF5_SERIAL_USE_HWFLOWCTRL == TRUE)
- uint32_t rts_pad;
- uint32_t cts_pad;
-#endif
-} SerialConfig;
-
-/**
- * @brief @p SerialDriver specific data.
- */
-#define _serial_driver_data \
- _base_asynchronous_channel_data \
- /* Driver state.*/ \
- sdstate_t state; \
- /* Input queue.*/ \
- input_queue_t iqueue; \
- /* Output queue.*/ \
- output_queue_t oqueue; \
- /* Input circular buffer.*/ \
- uint8_t ib[SERIAL_BUFFERS_SIZE]; \
- /* Output circular buffer.*/ \
- uint8_t ob[SERIAL_BUFFERS_SIZE]; \
- /* 1 if port is busy transmitting, 0 otherwise. */ \
- uint8_t tx_busy; \
- /* End of the mandatory fields.*/ \
- thread_t *thread;
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-#if (NRF5_SERIAL_USE_UART0 == TRUE) && !defined(__DOXYGEN__)
-extern SerialDriver SD1;
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void sd_lld_init(void);
- void sd_lld_start(SerialDriver *sdp, const SerialConfig *config);
- void sd_lld_stop(SerialDriver *sdp);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* HAL_USE_SERIAL == TRUE */
-
-#endif /* HAL_SERIAL_LLD_H */
-
-/** @} */
|