diff options
Diffstat (limited to 'os/hal/ports/TIVA')
-rw-r--r-- | os/hal/ports/TIVA/LLD/UART/hal_serial_lld.c | 121 | ||||
-rw-r--r-- | os/hal/ports/TIVA/LLD/UART/hal_serial_lld.h | 22 |
2 files changed, 85 insertions, 58 deletions
diff --git a/os/hal/ports/TIVA/LLD/UART/hal_serial_lld.c b/os/hal/ports/TIVA/LLD/UART/hal_serial_lld.c index 0ec960f..7203e74 100644 --- a/os/hal/ports/TIVA/LLD/UART/hal_serial_lld.c +++ b/os/hal/ports/TIVA/LLD/UART/hal_serial_lld.c @@ -34,58 +34,42 @@ /* Driver exported variables. */ /*===========================================================================*/ -/** - * @brief UART0 serial driver identifier. - */ +/** @brief UART0 serial driver identifier.*/ #if TIVA_SERIAL_USE_UART0 || defined(__DOXYGEN__) SerialDriver SD1; #endif -/** - * @brief UART1 serial driver identifier. - */ +/** @brief UART1 serial driver identifier.*/ #if TIVA_SERIAL_USE_UART1 || defined(__DOXYGEN__) SerialDriver SD2; #endif -/** - * @brief UART2 serial driver identifier. - */ +/** @brief UART2 serial driver identifier.*/ #if TIVA_SERIAL_USE_UART2 || defined(__DOXYGEN__) SerialDriver SD3; #endif -/** - * @brief UART3 serial driver identifier. - */ +/** @brief UART3 serial driver identifier.*/ #if TIVA_SERIAL_USE_UART3 || defined(__DOXYGEN__) SerialDriver SD4; #endif -/** - * @brief UART4 serial driver identifier. - */ +/** @brief UART4 serial driver identifier.*/ #if TIVA_SERIAL_USE_UART4 || defined(__DOXYGEN__) SerialDriver SD5; #endif -/** - * @brief UART5 serial driver identifier. - */ +/** @brief UART5 serial driver identifier.*/ #if TIVA_SERIAL_USE_UART5 || defined(__DOXYGEN__) SerialDriver SD6; #endif -/** - * @brief UART6 serial driver identifier. - */ +/** @brief UART6 serial driver identifier.*/ #if TIVA_SERIAL_USE_UART6 || defined(__DOXYGEN__) SerialDriver SD7; #endif -/** - * @brief UART7 serial driver identifier. - */ +/** @brief UART7 serial driver identifier.*/ #if TIVA_SERIAL_USE_UART7 || defined(__DOXYGEN__) SerialDriver SD8; #endif @@ -94,14 +78,14 @@ SerialDriver SD8; /* Driver local variables. */ /*===========================================================================*/ -/** - * @brief Driver default configuration. - */ +/** @brief Driver default configuration.*/ static const SerialConfig sd_default_config = { SERIAL_DEFAULT_BITRATE, - TIVA_LCRH_FEN | TIVA_LCRH_WLEN_8, - TIVA_IFLS_TXIFLSEL_1_8_F | TIVA_IFLS_RXIFLSEL_1_8_E + 0, + UART_LCRH_FEN | UART_LCRH_WLEN_8, + UART_IFLS_TX4_8 | UART_IFLS_RX7_8, + UART_CC_CS_SYSCLK }; /*===========================================================================*/ @@ -111,23 +95,55 @@ static const SerialConfig sd_default_config = /** * @brief UART initialization. * - * @param[in] sdp communication channel associated to the UART + * @param[in] sdp pointer to a @p SerialDriver object * @param[in] config the architecture-dependent serial driver configuration */ static void uart_init(SerialDriver *sdp, const SerialConfig *config) { uint32_t u = sdp->uart; - uint32_t div; /* baud rate divisor */ + uint32_t brd; + uint32_t speed = config->speed; + uint32_t clock_source; + + if (config->ctl & UART_CTL_HSE) { + /* High speed mode is enabled, half the baud rate to compensate + * for high speed mode.*/ + speed = (speed + 1) / 2; + } - /* disable the UART before any of the control registers are reprogrammed */ - HWREG(u + UART_O_CTL) &= ~TIVA_CTL_UARTEN; - div = (((TIVA_SYSCLK * 8) / config->sc_speed) + 1) / 2; - HWREG((u) + UART_O_IBRD) = div / 64; /* integer portion of the baud rate divisor */ - HWREG((u) + UART_O_FBRD) = div % 64; /* fractional portion of the baud rate divisor */ - HWREG((u) + UART_O_LCRH) = config->sc_lcrh; /* set data format */ - HWREG((u) + UART_O_IFLS) = config->sc_ifls; - HWREG((u) + UART_O_CTL) |= TIVA_CTL_TXE | TIVA_CTL_RXE | TIVA_CTL_UARTEN; - HWREG((u) + UART_O_IM) |= TIVA_IM_RXIM | TIVA_IM_TXIM | TIVA_IM_RTIM; /* interrupts enable */ + if ((config->cc & UART_CC_CS_SYSCLK) == UART_CC_CS_SYSCLK) { + /* UART is clocked using the SYSCLK.*/ + clock_source = TIVA_SYSCLK * 8; + } + else { + /* UART is clocked using the PIOSC.*/ + clock_source = 16000000 * 8; + } + + /* Calculate the baud rate divisor */ + brd = ((clock_source / speed) + 1) / 2; + + /* Disable UART.*/ + HWREG(u + UART_O_CTL) &= ~UART_CTL_UARTEN; + + /* Set baud rate.*/ + HWREG(u + UART_O_IBRD) = brd / 64; + HWREG(u + UART_O_FBRD) = brd % 64; + + /* Line control/*/ + HWREG(u + UART_O_LCRH) = config->lcrh; + + /* Select clock source.*/ + HWREG(u + UART_O_CC) = config->cc & UART_CC_CS_M; + + /* FIFO configuration.*/ + HWREG(u + UART_O_IFLS) = config->ifls & (UART_IFLS_RX_M | UART_IFLS_TX_M); + + /* Note that some bits are enforced.*/ + HWREG(u + UART_O_CTL) = config->ctl | UART_CTL_RXE | UART_CTL_TXE | UART_CTL_UARTEN; + + /* Enable interrupts.*/ + HWREG(u + UART_O_IM) = TIVA_IM_RXIM | TIVA_IM_TXIM | TIVA_IM_RTIM; } /** @@ -137,7 +153,7 @@ static void uart_init(SerialDriver *sdp, const SerialConfig *config) */ static void uart_deinit(uint32_t u) { - HWREG((u) + UART_O_CTL) &= ~TIVA_CTL_UARTEN; + HWREG(u + UART_O_CTL) &= ~TIVA_CTL_UARTEN; } /** @@ -175,9 +191,9 @@ static void set_error(SerialDriver *sdp, uint16_t err) static void serial_serve_interrupt(SerialDriver *sdp) { uint32_t u = sdp->uart; - uint16_t mis = HWREG((u) + UART_O_MIS); + uint16_t mis = HWREG(u + UART_O_MIS); - HWREG((u) + UART_O_ICR) = mis; /* clear interrupts */ + HWREG(u + UART_O_ICR) = mis; /* clear interrupts */ if (mis & (TIVA_MIS_FEMIS | TIVA_MIS_PEMIS | TIVA_MIS_BEMIS | TIVA_MIS_OEMIS)) { set_error(sdp, mis); @@ -189,9 +205,9 @@ static void serial_serve_interrupt(SerialDriver *sdp) chnAddFlagsI(sdp, CHN_INPUT_AVAILABLE); } osalSysUnlockFromISR(); - while ((HWREG((u) + UART_O_FR) & TIVA_FR_RXFE) == 0) { + while ((HWREG(u + UART_O_FR) & TIVA_FR_RXFE) == 0) { osalSysLockFromISR(); - if (iqPutI(&sdp->iqueue, HWREG((u) + UART_O_DR)) < Q_OK) { + if (iqPutI(&sdp->iqueue, HWREG(u + UART_O_DR)) < Q_OK) { chnAddFlagsI(sdp, SD_OVERRUN_ERROR); } osalSysUnlockFromISR(); @@ -199,19 +215,19 @@ static void serial_serve_interrupt(SerialDriver *sdp) } if (mis & TIVA_MIS_TXMIS) { - while ((HWREG((u) + UART_O_FR) & TIVA_FR_TXFF) == 0) { + while ((HWREG(u + UART_O_FR) & TIVA_FR_TXFF) == 0) { msg_t b; osalSysLockFromISR(); b = oqGetI(&sdp->oqueue); osalSysUnlockFromISR(); if (b < Q_OK) { - HWREG((u) + UART_O_IM) &= ~TIVA_IM_TXIM; + HWREG(u + UART_O_IM) &= ~TIVA_IM_TXIM; osalSysLockFromISR(); chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY); osalSysUnlockFromISR(); break; } - HWREG((u) + UART_O_DR) = b; + HWREG(u + UART_O_DR) = b; } } } @@ -223,15 +239,16 @@ static void fifo_load(SerialDriver *sdp) { uint32_t u = sdp->uart; - while ((HWREG((u) + UART_O_FR) & TIVA_FR_TXFF) == 0) { + while ((HWREG(u + UART_O_FR) & TIVA_FR_TXFF) == 0) { msg_t b = oqGetI(&sdp->oqueue); if (b < Q_OK) { chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY); return; } - HWREG((u) + UART_O_DR) = b; + HWREG(u + UART_O_DR) = b; } - HWREG((u) + UART_O_IM) |= TIVA_IM_TXIM; /* transmit interrupt enable */ + + HWREG(u + UART_O_IM) |= TIVA_IM_TXIM; /* transmit interrupt enable */ } /** @@ -577,7 +594,7 @@ void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) #endif #if TIVA_SERIAL_USE_UART7 if (&SD8 == sdp) { - HWREG)SYSCTL_RCGCUART) |= (1 << 7); + HWREG(SYSCTL_RCGCUART) |= (1 << 7); while (!(HWREG(SYSCTL_PRUART) & (1 << 7))) ; diff --git a/os/hal/ports/TIVA/LLD/UART/hal_serial_lld.h b/os/hal/ports/TIVA/LLD/UART/hal_serial_lld.h index a6968cd..49239fb 100644 --- a/os/hal/ports/TIVA/LLD/UART/hal_serial_lld.h +++ b/os/hal/ports/TIVA/LLD/UART/hal_serial_lld.h @@ -388,22 +388,32 @@ * @brief Tiva Serial Driver configuration structure. * @details An instance of this structure must be passed to @p sdStart() * in order to configure and start a serial driver operations. + * @note This structure content is architecture dependent, each driver + * implementation defines its own version and the custom static + * initializers. */ typedef struct { /** * @brief Bit rate. */ - uint32_t sc_speed; + uint32_t speed; /* End of the mandatory fields. */ /** - * @brief Initialization value for the LCRH (Line Control) register. + * @brief Initialization value for the CTL register. */ - uint32_t sc_lcrh; + uint16_t ctl; /** - * @brief Initialization value for the IFLS (Interrupt FIFO Level Select) - * register. + * @brief Initialization value for the LCRH register. */ - uint32_t sc_ifls; + uint8_t lcrh; + /** + * @brief Initialization value for the IFLS register. + */ + uint8_t ifls; + /** + * @brief Initialization value for the CC register. + */ + uint8_t cc; } SerialConfig; /** |