diff options
Diffstat (limited to 'testhal/TIVA/TM4C123x')
41 files changed, 2167 insertions, 682 deletions
diff --git a/testhal/TIVA/TM4C123x/ADC/Makefile b/testhal/TIVA/TM4C123x/ADC/Makefile index 15ea309..f098dc2 100644 --- a/testhal/TIVA/TM4C123x/ADC/Makefile +++ b/testhal/TIVA/TM4C123x/ADC/Makefile @@ -5,7 +5,7 @@ # Compiler options here. ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 endif # C specific options here (added to USE_OPT). @@ -46,7 +46,7 @@ endif # If enabled, this option makes the build process faster by not compiling # modules not used in the current configuration. ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = no + USE_SMART_BUILD = yes endif # @@ -71,7 +71,7 @@ endif # Enables the use of FPU on Cortex-M4 (no, softfp, hard). ifeq ($(USE_FPU),) - USE_FPU = hard + USE_FPU = no endif # @@ -88,6 +88,9 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib + +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk # HAL-OSAL files (optional). @@ -106,20 +109,12 @@ LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(STREAMSSRC) \ +CSRC = $(ALLCSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -142,13 +137,10 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(STREAMSINC) $(CHIBIOS)/os/various +INCDIR = $(ALLINC) # # Project, sources and paths @@ -184,10 +176,10 @@ AOPT = TOPT = -mthumb -DTHUMB # Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes # Define C++ warning options here -CPPWARN = -Wall -Wextra +CPPWARN = -Wall -Wextra -Wundef # # Compiler settings diff --git a/testhal/TIVA/TM4C123x/ADC/chconf.h b/testhal/TIVA/TM4C123x/ADC/chconf.h index 0d24275..7b3b83f 100644 --- a/testhal/TIVA/TM4C123x/ADC/chconf.h +++ b/testhal/TIVA/TM4C123x/ADC/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ #define _CHIBIOS_RT_CONF_VER_5_0_ @@ -41,6 +52,18 @@ #define CH_CFG_ST_FREQUENCY 10000 /** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#define CH_CFG_INTERVALS_SIZE 32 + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_TIME_TYPES_SIZE 32 + +/** * @brief Time delta constant for the tick-less mode. * @note If this value is zero then the system uses the classic * periodic tick. This value represents the minimum number @@ -48,14 +71,7 @@ * The value one is not valid, timeouts are rounded up to * this value. */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 +#define CH_CFG_ST_TIMEDELTA 2 /** @} */ @@ -98,7 +114,8 @@ * @details When this option is activated the function @p chSysInit() * does not spawn the idle thread. The application @p main() * function becomes the idle thread and must implement an - * infinite loop. */ + * infinite loop. + */ #define CH_CFG_NO_IDLE_THREAD FALSE /** @} */ @@ -183,6 +200,16 @@ #define CH_CFG_USE_MUTEXES TRUE /** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** * @brief Conditional Variables APIs. * @details If enabled then the conditional variables APIs are included * in the kernel. @@ -251,14 +278,6 @@ #define CH_CFG_USE_MAILBOXES TRUE /** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** * @brief Core Memory Manager APIs. * @details If enabled then the core memory manager APIs are included * in the kernel. @@ -289,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE /** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_OBJ_FIFOS TRUE + +/** * @brief Dynamic Threads APIs. * @details If enabled then the dynamic threads creation APIs are included * in the kernel. @@ -303,6 +331,56 @@ /*===========================================================================*/ /** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#define CH_CFG_USE_FACTORY TRUE + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 + +/** + * @brief Enables the registry of generic objects. + */ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE + +/** + * @brief Enables factory for generic buffers. + */ +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE + +/** + * @brief Enables factory for semaphores. + */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE + +/** + * @brief Enables factory for mailboxes. + */ +#define CH_CFG_FACTORY_MAILBOXES TRUE + +/** + * @brief Enables factory for objects FIFOs. + */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE + +/** @} */ + +/*===========================================================================*/ +/** * @name Debug options * @{ */ @@ -345,12 +423,18 @@ /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE FALSE +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 /** * @brief Debug option, stack checks. @@ -395,6 +479,22 @@ /*===========================================================================*/ /** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. */ @@ -403,9 +503,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -415,10 +515,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -429,7 +525,7 @@ * @details This hook is invoked just before switching between threads. */ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ + /* Context switch code here.*/ \ } /** @@ -452,7 +548,8 @@ * should be invoked from here. * @note This macro can be used to activate a power saving mode. */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -461,7 +558,8 @@ * should be invoked from here. * @note This macro can be used to deactivate a power saving mode. */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -505,6 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/ADC/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/testhal/TIVA/TM4C123x/ADC/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 0af6b44..0000000 --- a/testhal/TIVA/TM4C123x/ADC/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<launchConfiguration type="org.eclipse.ui.externaltools.ProgramLaunchConfigurationType"> -<listAttribute key="org.eclipse.debug.ui.favoriteGroups"> -<listEntry value="org.eclipse.ui.externaltools.launchGroup"/> -</listAttribute> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LAUNCH_CONFIGURATION_BUILD_SCOPE" value="${none}"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LOCATION" value="${eclipse_home}\..\tools\openocd\bin\openocd.exe"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_TOOL_ARGUMENTS" value="-c "telnet_port 4444" -f "interface/ti-icdi.cfg" -f "${file_prompt}""/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_WORKING_DIRECTORY" value="${eclipse_home}\..\tools\openocd\scripts\"/> -</launchConfiguration> diff --git a/testhal/TIVA/TM4C123x/ADC/halconf.h b/testhal/TIVA/TM4C123x/ADC/halconf.h index 20f0e46..3501d36 100644 --- a/testhal/TIVA/TM4C123x/ADC/halconf.h +++ b/testhal/TIVA/TM4C123x/ADC/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _HALCONF_H_ -#define _HALCONF_H_ +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H #include "mcuconf.h" @@ -41,6 +52,20 @@ #endif /** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** * @brief Enables the EXT subsystem. */ #if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) @@ -62,6 +87,13 @@ #endif /** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** * @brief Enables the ICU subsystem. */ #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) @@ -90,6 +122,13 @@ #endif /** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** * @brief Enables the RTC subsystem. */ #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) @@ -138,6 +177,13 @@ #define HAL_USE_USB FALSE #endif +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + /*===========================================================================*/ /* ADC driver related settings. */ /*===========================================================================*/ @@ -170,6 +216,28 @@ #endif /*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ /* I2C driver related settings. */ /*===========================================================================*/ @@ -262,7 +330,7 @@ * @brief Serial buffers size. * @details Configuration parameter, you can change the depth of the queue * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive + * @note The default is 16 bytes for both the transmission and receive * buffers. */ #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) @@ -270,6 +338,29 @@ #endif /*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ /* SPI driver related settings. */ /*===========================================================================*/ @@ -289,6 +380,38 @@ #define SPI_USE_MUTUAL_EXCLUSION TRUE #endif -#endif /* _HALCONF_H_ */ +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* HALCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/ADC/mcuconf.h b/testhal/TIVA/TM4C123x/ADC/mcuconf.h index 02d79d6..037c1d3 100644 --- a/testhal/TIVA/TM4C123x/ADC/mcuconf.h +++ b/testhal/TIVA/TM4C123x/ADC/mcuconf.h @@ -51,15 +51,16 @@ #define TIVA_ADC_ADC1_SS0_UDMA_MAPPING 1 #define TIVA_ADC0_SEQ0_PRIORITY 4 #define TIVA_ADC1_SEQ0_PRIORITY 4 + /* - * GPIO driver system settings. + * PAL driver system settings. */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE +#define TIVA_PAL_GPIOA_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOB_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOC_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOD_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOE_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOF_IRQ_PRIORITY 3 /* * GPT driver system settings. diff --git a/testhal/TIVA/TM4C123x/EXT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/testhal/TIVA/TM4C123x/EXT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 0af6b44..0000000 --- a/testhal/TIVA/TM4C123x/EXT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<launchConfiguration type="org.eclipse.ui.externaltools.ProgramLaunchConfigurationType"> -<listAttribute key="org.eclipse.debug.ui.favoriteGroups"> -<listEntry value="org.eclipse.ui.externaltools.launchGroup"/> -</listAttribute> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LAUNCH_CONFIGURATION_BUILD_SCOPE" value="${none}"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LOCATION" value="${eclipse_home}\..\tools\openocd\bin\openocd.exe"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_TOOL_ARGUMENTS" value="-c "telnet_port 4444" -f "interface/ti-icdi.cfg" -f "${file_prompt}""/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_WORKING_DIRECTORY" value="${eclipse_home}\..\tools\openocd\scripts\"/> -</launchConfiguration> diff --git a/testhal/TIVA/TM4C123x/EXT/main.c b/testhal/TIVA/TM4C123x/EXT/main.c deleted file mode 100644 index 2326375..0000000 --- a/testhal/TIVA/TM4C123x/EXT/main.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - Copyright (C) 2014..2017 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void extcb1(EXTDriver *extp, expchannel_t channel) -{ - (void)extp; - (void)channel; - - palToggleLine(LINE_LED_RED); -} - -static void extcb2(EXTDriver *extp, expchannel_t channel) -{ - (void)extp; - (void)channel; - - palToggleLine(LINE_LED_GREEN); -} - -static const EXTConfig extcfg = -{ - { - /* GPIOA */ - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - /* GPIOB */ - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - /* GPIOC */ - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - /* GPIOD */ - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - /* GPIOE */ - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - /* GPIOF */ - {EXT_CH_MODE_FALLING_EDGE | EXT_CH_MODE_AUTOSTART, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_RISING_EDGE | EXT_CH_MODE_AUTOSTART, extcb2}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) -{ - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - palSetLineMode(LINE_LED_RED, PAL_MODE_OUTPUT_PUSHPULL); - palSetLineMode(LINE_LED_GREEN, PAL_MODE_OUTPUT_PUSHPULL); - palSetLineMode(LINE_SW1, PAL_MODE_INPUT_PULLUP); - palSetLineMode(LINE_SW2, PAL_MODE_INPUT_PULLUP); - - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - - return 0; -} diff --git a/testhal/TIVA/TM4C123x/GPT/Makefile b/testhal/TIVA/TM4C123x/GPT/Makefile index f2833ec..00661de 100644 --- a/testhal/TIVA/TM4C123x/GPT/Makefile +++ b/testhal/TIVA/TM4C123x/GPT/Makefile @@ -71,7 +71,7 @@ endif # Enables the use of FPU on Cortex-M4 (no, softfp, hard). ifeq ($(USE_FPU),) - USE_FPU = hard + USE_FPU = no endif # @@ -88,6 +88,9 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib + +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk # HAL-OSAL files (optional). @@ -105,19 +108,12 @@ LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ +CSRC = $(ALLCSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -140,13 +136,10 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) # # Project, sources and paths @@ -182,10 +175,10 @@ AOPT = TOPT = -mthumb -DTHUMB # Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes # Define C++ warning options here -CPPWARN = -Wall -Wextra +CPPWARN = -Wall -Wextra -Wundef # # Compiler settings diff --git a/testhal/TIVA/TM4C123x/GPT/chconf.h b/testhal/TIVA/TM4C123x/GPT/chconf.h index 0d24275..7b3b83f 100644 --- a/testhal/TIVA/TM4C123x/GPT/chconf.h +++ b/testhal/TIVA/TM4C123x/GPT/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ #define _CHIBIOS_RT_CONF_VER_5_0_ @@ -41,6 +52,18 @@ #define CH_CFG_ST_FREQUENCY 10000 /** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#define CH_CFG_INTERVALS_SIZE 32 + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_TIME_TYPES_SIZE 32 + +/** * @brief Time delta constant for the tick-less mode. * @note If this value is zero then the system uses the classic * periodic tick. This value represents the minimum number @@ -48,14 +71,7 @@ * The value one is not valid, timeouts are rounded up to * this value. */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 +#define CH_CFG_ST_TIMEDELTA 2 /** @} */ @@ -98,7 +114,8 @@ * @details When this option is activated the function @p chSysInit() * does not spawn the idle thread. The application @p main() * function becomes the idle thread and must implement an - * infinite loop. */ + * infinite loop. + */ #define CH_CFG_NO_IDLE_THREAD FALSE /** @} */ @@ -183,6 +200,16 @@ #define CH_CFG_USE_MUTEXES TRUE /** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** * @brief Conditional Variables APIs. * @details If enabled then the conditional variables APIs are included * in the kernel. @@ -251,14 +278,6 @@ #define CH_CFG_USE_MAILBOXES TRUE /** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** * @brief Core Memory Manager APIs. * @details If enabled then the core memory manager APIs are included * in the kernel. @@ -289,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE /** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_OBJ_FIFOS TRUE + +/** * @brief Dynamic Threads APIs. * @details If enabled then the dynamic threads creation APIs are included * in the kernel. @@ -303,6 +331,56 @@ /*===========================================================================*/ /** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#define CH_CFG_USE_FACTORY TRUE + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 + +/** + * @brief Enables the registry of generic objects. + */ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE + +/** + * @brief Enables factory for generic buffers. + */ +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE + +/** + * @brief Enables factory for semaphores. + */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE + +/** + * @brief Enables factory for mailboxes. + */ +#define CH_CFG_FACTORY_MAILBOXES TRUE + +/** + * @brief Enables factory for objects FIFOs. + */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE + +/** @} */ + +/*===========================================================================*/ +/** * @name Debug options * @{ */ @@ -345,12 +423,18 @@ /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE FALSE +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 /** * @brief Debug option, stack checks. @@ -395,6 +479,22 @@ /*===========================================================================*/ /** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. */ @@ -403,9 +503,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -415,10 +515,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -429,7 +525,7 @@ * @details This hook is invoked just before switching between threads. */ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ + /* Context switch code here.*/ \ } /** @@ -452,7 +548,8 @@ * should be invoked from here. * @note This macro can be used to activate a power saving mode. */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -461,7 +558,8 @@ * should be invoked from here. * @note This macro can be used to deactivate a power saving mode. */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -505,6 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/GPT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/testhal/TIVA/TM4C123x/GPT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 0af6b44..0000000 --- a/testhal/TIVA/TM4C123x/GPT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<launchConfiguration type="org.eclipse.ui.externaltools.ProgramLaunchConfigurationType"> -<listAttribute key="org.eclipse.debug.ui.favoriteGroups"> -<listEntry value="org.eclipse.ui.externaltools.launchGroup"/> -</listAttribute> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LAUNCH_CONFIGURATION_BUILD_SCOPE" value="${none}"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LOCATION" value="${eclipse_home}\..\tools\openocd\bin\openocd.exe"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_TOOL_ARGUMENTS" value="-c "telnet_port 4444" -f "interface/ti-icdi.cfg" -f "${file_prompt}""/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_WORKING_DIRECTORY" value="${eclipse_home}\..\tools\openocd\scripts\"/> -</launchConfiguration> diff --git a/testhal/TIVA/TM4C123x/GPT/halconf.h b/testhal/TIVA/TM4C123x/GPT/halconf.h index 4d1738c..cfdf66a 100644 --- a/testhal/TIVA/TM4C123x/GPT/halconf.h +++ b/testhal/TIVA/TM4C123x/GPT/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _HALCONF_H_ -#define _HALCONF_H_ +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H #include "mcuconf.h" @@ -41,6 +52,20 @@ #endif /** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** * @brief Enables the EXT subsystem. */ #if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) @@ -62,6 +87,13 @@ #endif /** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** * @brief Enables the ICU subsystem. */ #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) @@ -90,6 +122,13 @@ #endif /** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** * @brief Enables the RTC subsystem. */ #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) @@ -138,6 +177,13 @@ #define HAL_USE_USB FALSE #endif +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + /*===========================================================================*/ /* ADC driver related settings. */ /*===========================================================================*/ @@ -170,6 +216,28 @@ #endif /*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ /* I2C driver related settings. */ /*===========================================================================*/ @@ -262,7 +330,7 @@ * @brief Serial buffers size. * @details Configuration parameter, you can change the depth of the queue * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive + * @note The default is 16 bytes for both the transmission and receive * buffers. */ #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) @@ -270,6 +338,29 @@ #endif /*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ /* SPI driver related settings. */ /*===========================================================================*/ @@ -289,6 +380,38 @@ #define SPI_USE_MUTUAL_EXCLUSION TRUE #endif -#endif /* _HALCONF_H_ */ +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* HALCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/GPT/mcuconf.h b/testhal/TIVA/TM4C123x/GPT/mcuconf.h index 9bcd30d..91acd32 100644 --- a/testhal/TIVA/TM4C123x/GPT/mcuconf.h +++ b/testhal/TIVA/TM4C123x/GPT/mcuconf.h @@ -41,14 +41,14 @@ SYSCTL_RCC_PWMDIV_8) /* - * GPIO driver system settings. + * PAL driver system settings. */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE +#define TIVA_PAL_GPIOA_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOB_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOC_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOD_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOE_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOF_IRQ_PRIORITY 3 /* * GPT driver system settings. diff --git a/testhal/TIVA/TM4C123x/I2C/Makefile b/testhal/TIVA/TM4C123x/I2C/Makefile index d4d1334..f098dc2 100644 --- a/testhal/TIVA/TM4C123x/I2C/Makefile +++ b/testhal/TIVA/TM4C123x/I2C/Makefile @@ -71,7 +71,7 @@ endif # Enables the use of FPU on Cortex-M4 (no, softfp, hard). ifeq ($(USE_FPU),) - USE_FPU = hard + USE_FPU = no endif # @@ -88,6 +88,9 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib + +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk # HAL-OSAL files (optional). @@ -106,20 +109,12 @@ LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(STREAMSSRC) \ - main.c +CSRC = $(ALLCSRC) \ + main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -142,13 +137,10 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(STREAMSINC) $(CHIBIOS)/os/various +INCDIR = $(ALLINC) # # Project, sources and paths @@ -184,10 +176,10 @@ AOPT = TOPT = -mthumb -DTHUMB # Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes # Define C++ warning options here -CPPWARN = -Wall -Wextra +CPPWARN = -Wall -Wextra -Wundef # # Compiler settings diff --git a/testhal/TIVA/TM4C123x/I2C/chconf.h b/testhal/TIVA/TM4C123x/I2C/chconf.h index 0d24275..7b3b83f 100644 --- a/testhal/TIVA/TM4C123x/I2C/chconf.h +++ b/testhal/TIVA/TM4C123x/I2C/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ #define _CHIBIOS_RT_CONF_VER_5_0_ @@ -41,6 +52,18 @@ #define CH_CFG_ST_FREQUENCY 10000 /** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#define CH_CFG_INTERVALS_SIZE 32 + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_TIME_TYPES_SIZE 32 + +/** * @brief Time delta constant for the tick-less mode. * @note If this value is zero then the system uses the classic * periodic tick. This value represents the minimum number @@ -48,14 +71,7 @@ * The value one is not valid, timeouts are rounded up to * this value. */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 +#define CH_CFG_ST_TIMEDELTA 2 /** @} */ @@ -98,7 +114,8 @@ * @details When this option is activated the function @p chSysInit() * does not spawn the idle thread. The application @p main() * function becomes the idle thread and must implement an - * infinite loop. */ + * infinite loop. + */ #define CH_CFG_NO_IDLE_THREAD FALSE /** @} */ @@ -183,6 +200,16 @@ #define CH_CFG_USE_MUTEXES TRUE /** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** * @brief Conditional Variables APIs. * @details If enabled then the conditional variables APIs are included * in the kernel. @@ -251,14 +278,6 @@ #define CH_CFG_USE_MAILBOXES TRUE /** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** * @brief Core Memory Manager APIs. * @details If enabled then the core memory manager APIs are included * in the kernel. @@ -289,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE /** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_OBJ_FIFOS TRUE + +/** * @brief Dynamic Threads APIs. * @details If enabled then the dynamic threads creation APIs are included * in the kernel. @@ -303,6 +331,56 @@ /*===========================================================================*/ /** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#define CH_CFG_USE_FACTORY TRUE + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 + +/** + * @brief Enables the registry of generic objects. + */ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE + +/** + * @brief Enables factory for generic buffers. + */ +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE + +/** + * @brief Enables factory for semaphores. + */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE + +/** + * @brief Enables factory for mailboxes. + */ +#define CH_CFG_FACTORY_MAILBOXES TRUE + +/** + * @brief Enables factory for objects FIFOs. + */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE + +/** @} */ + +/*===========================================================================*/ +/** * @name Debug options * @{ */ @@ -345,12 +423,18 @@ /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE FALSE +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 /** * @brief Debug option, stack checks. @@ -395,6 +479,22 @@ /*===========================================================================*/ /** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. */ @@ -403,9 +503,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -415,10 +515,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -429,7 +525,7 @@ * @details This hook is invoked just before switching between threads. */ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ + /* Context switch code here.*/ \ } /** @@ -452,7 +548,8 @@ * should be invoked from here. * @note This macro can be used to activate a power saving mode. */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -461,7 +558,8 @@ * should be invoked from here. * @note This macro can be used to deactivate a power saving mode. */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -505,6 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/I2C/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/testhal/TIVA/TM4C123x/I2C/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 0af6b44..0000000 --- a/testhal/TIVA/TM4C123x/I2C/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<launchConfiguration type="org.eclipse.ui.externaltools.ProgramLaunchConfigurationType"> -<listAttribute key="org.eclipse.debug.ui.favoriteGroups"> -<listEntry value="org.eclipse.ui.externaltools.launchGroup"/> -</listAttribute> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LAUNCH_CONFIGURATION_BUILD_SCOPE" value="${none}"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LOCATION" value="${eclipse_home}\..\tools\openocd\bin\openocd.exe"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_TOOL_ARGUMENTS" value="-c "telnet_port 4444" -f "interface/ti-icdi.cfg" -f "${file_prompt}""/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_WORKING_DIRECTORY" value="${eclipse_home}\..\tools\openocd\scripts\"/> -</launchConfiguration> diff --git a/testhal/TIVA/TM4C123x/I2C/halconf.h b/testhal/TIVA/TM4C123x/I2C/halconf.h index 5c926e9..62c1b9c 100644 --- a/testhal/TIVA/TM4C123x/I2C/halconf.h +++ b/testhal/TIVA/TM4C123x/I2C/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _HALCONF_H_ -#define _HALCONF_H_ +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H #include "mcuconf.h" @@ -41,6 +52,20 @@ #endif /** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** * @brief Enables the EXT subsystem. */ #if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) @@ -62,6 +87,13 @@ #endif /** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** * @brief Enables the ICU subsystem. */ #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) @@ -90,6 +122,13 @@ #endif /** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** * @brief Enables the RTC subsystem. */ #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) @@ -138,6 +177,13 @@ #define HAL_USE_USB FALSE #endif +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + /*===========================================================================*/ /* ADC driver related settings. */ /*===========================================================================*/ @@ -170,6 +216,28 @@ #endif /*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ /* I2C driver related settings. */ /*===========================================================================*/ @@ -262,7 +330,7 @@ * @brief Serial buffers size. * @details Configuration parameter, you can change the depth of the queue * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive + * @note The default is 16 bytes for both the transmission and receive * buffers. */ #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) @@ -270,6 +338,29 @@ #endif /*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ /* SPI driver related settings. */ /*===========================================================================*/ @@ -289,6 +380,38 @@ #define SPI_USE_MUTUAL_EXCLUSION TRUE #endif -#endif /* _HALCONF_H_ */ +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* HALCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/I2C/main.c b/testhal/TIVA/TM4C123x/I2C/main.c index c46bec9..0253710 100644 --- a/testhal/TIVA/TM4C123x/I2C/main.c +++ b/testhal/TIVA/TM4C123x/I2C/main.c @@ -57,7 +57,7 @@ static const I2CConfig i2cfg = int main(void) { msg_t status = MSG_OK; - systime_t tmo = MS2ST(100); + systime_t tmo = OSAL_MS2I(100); /* * System initializations. diff --git a/testhal/TIVA/TM4C123x/I2C/mcuconf.h b/testhal/TIVA/TM4C123x/I2C/mcuconf.h index 514857e..fe8e77c 100644 --- a/testhal/TIVA/TM4C123x/I2C/mcuconf.h +++ b/testhal/TIVA/TM4C123x/I2C/mcuconf.h @@ -41,14 +41,14 @@ SYSCTL_RCC_PWMDIV_8) /* - * GPIO driver system settings. + * PAL driver system settings. */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE +#define TIVA_PAL_GPIOA_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOB_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOC_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOD_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOE_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOF_IRQ_PRIORITY 3 /* * GPT driver system settings. diff --git a/testhal/TIVA/TM4C123x/PWM/Makefile b/testhal/TIVA/TM4C123x/PWM/Makefile index f2833ec..00661de 100644 --- a/testhal/TIVA/TM4C123x/PWM/Makefile +++ b/testhal/TIVA/TM4C123x/PWM/Makefile @@ -71,7 +71,7 @@ endif # Enables the use of FPU on Cortex-M4 (no, softfp, hard). ifeq ($(USE_FPU),) - USE_FPU = hard + USE_FPU = no endif # @@ -88,6 +88,9 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib + +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk # HAL-OSAL files (optional). @@ -105,19 +108,12 @@ LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ +CSRC = $(ALLCSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -140,13 +136,10 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) # # Project, sources and paths @@ -182,10 +175,10 @@ AOPT = TOPT = -mthumb -DTHUMB # Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes # Define C++ warning options here -CPPWARN = -Wall -Wextra +CPPWARN = -Wall -Wextra -Wundef # # Compiler settings diff --git a/testhal/TIVA/TM4C123x/PWM/chconf.h b/testhal/TIVA/TM4C123x/PWM/chconf.h index 0d24275..7b3b83f 100644 --- a/testhal/TIVA/TM4C123x/PWM/chconf.h +++ b/testhal/TIVA/TM4C123x/PWM/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ #define _CHIBIOS_RT_CONF_VER_5_0_ @@ -41,6 +52,18 @@ #define CH_CFG_ST_FREQUENCY 10000 /** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#define CH_CFG_INTERVALS_SIZE 32 + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_TIME_TYPES_SIZE 32 + +/** * @brief Time delta constant for the tick-less mode. * @note If this value is zero then the system uses the classic * periodic tick. This value represents the minimum number @@ -48,14 +71,7 @@ * The value one is not valid, timeouts are rounded up to * this value. */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 +#define CH_CFG_ST_TIMEDELTA 2 /** @} */ @@ -98,7 +114,8 @@ * @details When this option is activated the function @p chSysInit() * does not spawn the idle thread. The application @p main() * function becomes the idle thread and must implement an - * infinite loop. */ + * infinite loop. + */ #define CH_CFG_NO_IDLE_THREAD FALSE /** @} */ @@ -183,6 +200,16 @@ #define CH_CFG_USE_MUTEXES TRUE /** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** * @brief Conditional Variables APIs. * @details If enabled then the conditional variables APIs are included * in the kernel. @@ -251,14 +278,6 @@ #define CH_CFG_USE_MAILBOXES TRUE /** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** * @brief Core Memory Manager APIs. * @details If enabled then the core memory manager APIs are included * in the kernel. @@ -289,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE /** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_OBJ_FIFOS TRUE + +/** * @brief Dynamic Threads APIs. * @details If enabled then the dynamic threads creation APIs are included * in the kernel. @@ -303,6 +331,56 @@ /*===========================================================================*/ /** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#define CH_CFG_USE_FACTORY TRUE + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 + +/** + * @brief Enables the registry of generic objects. + */ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE + +/** + * @brief Enables factory for generic buffers. + */ +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE + +/** + * @brief Enables factory for semaphores. + */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE + +/** + * @brief Enables factory for mailboxes. + */ +#define CH_CFG_FACTORY_MAILBOXES TRUE + +/** + * @brief Enables factory for objects FIFOs. + */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE + +/** @} */ + +/*===========================================================================*/ +/** * @name Debug options * @{ */ @@ -345,12 +423,18 @@ /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE FALSE +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 /** * @brief Debug option, stack checks. @@ -395,6 +479,22 @@ /*===========================================================================*/ /** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. */ @@ -403,9 +503,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -415,10 +515,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -429,7 +525,7 @@ * @details This hook is invoked just before switching between threads. */ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ + /* Context switch code here.*/ \ } /** @@ -452,7 +548,8 @@ * should be invoked from here. * @note This macro can be used to activate a power saving mode. */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -461,7 +558,8 @@ * should be invoked from here. * @note This macro can be used to deactivate a power saving mode. */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -505,6 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/PWM/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/testhal/TIVA/TM4C123x/PWM/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 0af6b44..0000000 --- a/testhal/TIVA/TM4C123x/PWM/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<launchConfiguration type="org.eclipse.ui.externaltools.ProgramLaunchConfigurationType"> -<listAttribute key="org.eclipse.debug.ui.favoriteGroups"> -<listEntry value="org.eclipse.ui.externaltools.launchGroup"/> -</listAttribute> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LAUNCH_CONFIGURATION_BUILD_SCOPE" value="${none}"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LOCATION" value="${eclipse_home}\..\tools\openocd\bin\openocd.exe"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_TOOL_ARGUMENTS" value="-c "telnet_port 4444" -f "interface/ti-icdi.cfg" -f "${file_prompt}""/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_WORKING_DIRECTORY" value="${eclipse_home}\..\tools\openocd\scripts\"/> -</launchConfiguration> diff --git a/testhal/TIVA/TM4C123x/PWM/halconf.h b/testhal/TIVA/TM4C123x/PWM/halconf.h index 433d5d0..2f586f7 100644 --- a/testhal/TIVA/TM4C123x/PWM/halconf.h +++ b/testhal/TIVA/TM4C123x/PWM/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _HALCONF_H_ -#define _HALCONF_H_ +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H #include "mcuconf.h" @@ -41,6 +52,20 @@ #endif /** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** * @brief Enables the EXT subsystem. */ #if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) @@ -62,6 +87,13 @@ #endif /** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** * @brief Enables the ICU subsystem. */ #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) @@ -90,6 +122,13 @@ #endif /** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** * @brief Enables the RTC subsystem. */ #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) @@ -138,6 +177,13 @@ #define HAL_USE_USB FALSE #endif +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + /*===========================================================================*/ /* ADC driver related settings. */ /*===========================================================================*/ @@ -170,6 +216,28 @@ #endif /*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ /* I2C driver related settings. */ /*===========================================================================*/ @@ -262,7 +330,7 @@ * @brief Serial buffers size. * @details Configuration parameter, you can change the depth of the queue * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive + * @note The default is 16 bytes for both the transmission and receive * buffers. */ #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) @@ -270,6 +338,29 @@ #endif /*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ /* SPI driver related settings. */ /*===========================================================================*/ @@ -289,6 +380,38 @@ #define SPI_USE_MUTUAL_EXCLUSION TRUE #endif -#endif /* _HALCONF_H_ */ +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* HALCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/PWM/mcuconf.h b/testhal/TIVA/TM4C123x/PWM/mcuconf.h index 29119bd..e4d4e67 100644 --- a/testhal/TIVA/TM4C123x/PWM/mcuconf.h +++ b/testhal/TIVA/TM4C123x/PWM/mcuconf.h @@ -41,14 +41,14 @@ SYSCTL_RCC_PWMDIV_8) /* - * GPIO driver system settings. + * PAL driver system settings. */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE +#define TIVA_PAL_GPIOA_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOB_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOC_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOD_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOE_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOF_IRQ_PRIORITY 3 /* * GPT driver system settings. diff --git a/testhal/TIVA/TM4C123x/SPI/Makefile b/testhal/TIVA/TM4C123x/SPI/Makefile index f2833ec..00661de 100644 --- a/testhal/TIVA/TM4C123x/SPI/Makefile +++ b/testhal/TIVA/TM4C123x/SPI/Makefile @@ -71,7 +71,7 @@ endif # Enables the use of FPU on Cortex-M4 (no, softfp, hard). ifeq ($(USE_FPU),) - USE_FPU = hard + USE_FPU = no endif # @@ -88,6 +88,9 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib + +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk # HAL-OSAL files (optional). @@ -105,19 +108,12 @@ LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ +CSRC = $(ALLCSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -140,13 +136,10 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) # # Project, sources and paths @@ -182,10 +175,10 @@ AOPT = TOPT = -mthumb -DTHUMB # Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes # Define C++ warning options here -CPPWARN = -Wall -Wextra +CPPWARN = -Wall -Wextra -Wundef # # Compiler settings diff --git a/testhal/TIVA/TM4C123x/SPI/chconf.h b/testhal/TIVA/TM4C123x/SPI/chconf.h index 0d24275..7b3b83f 100644 --- a/testhal/TIVA/TM4C123x/SPI/chconf.h +++ b/testhal/TIVA/TM4C123x/SPI/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ #define _CHIBIOS_RT_CONF_VER_5_0_ @@ -41,6 +52,18 @@ #define CH_CFG_ST_FREQUENCY 10000 /** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#define CH_CFG_INTERVALS_SIZE 32 + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_TIME_TYPES_SIZE 32 + +/** * @brief Time delta constant for the tick-less mode. * @note If this value is zero then the system uses the classic * periodic tick. This value represents the minimum number @@ -48,14 +71,7 @@ * The value one is not valid, timeouts are rounded up to * this value. */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 +#define CH_CFG_ST_TIMEDELTA 2 /** @} */ @@ -98,7 +114,8 @@ * @details When this option is activated the function @p chSysInit() * does not spawn the idle thread. The application @p main() * function becomes the idle thread and must implement an - * infinite loop. */ + * infinite loop. + */ #define CH_CFG_NO_IDLE_THREAD FALSE /** @} */ @@ -183,6 +200,16 @@ #define CH_CFG_USE_MUTEXES TRUE /** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** * @brief Conditional Variables APIs. * @details If enabled then the conditional variables APIs are included * in the kernel. @@ -251,14 +278,6 @@ #define CH_CFG_USE_MAILBOXES TRUE /** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** * @brief Core Memory Manager APIs. * @details If enabled then the core memory manager APIs are included * in the kernel. @@ -289,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE /** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_OBJ_FIFOS TRUE + +/** * @brief Dynamic Threads APIs. * @details If enabled then the dynamic threads creation APIs are included * in the kernel. @@ -303,6 +331,56 @@ /*===========================================================================*/ /** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#define CH_CFG_USE_FACTORY TRUE + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 + +/** + * @brief Enables the registry of generic objects. + */ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE + +/** + * @brief Enables factory for generic buffers. + */ +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE + +/** + * @brief Enables factory for semaphores. + */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE + +/** + * @brief Enables factory for mailboxes. + */ +#define CH_CFG_FACTORY_MAILBOXES TRUE + +/** + * @brief Enables factory for objects FIFOs. + */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE + +/** @} */ + +/*===========================================================================*/ +/** * @name Debug options * @{ */ @@ -345,12 +423,18 @@ /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE FALSE +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 /** * @brief Debug option, stack checks. @@ -395,6 +479,22 @@ /*===========================================================================*/ /** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. */ @@ -403,9 +503,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -415,10 +515,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -429,7 +525,7 @@ * @details This hook is invoked just before switching between threads. */ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ + /* Context switch code here.*/ \ } /** @@ -452,7 +548,8 @@ * should be invoked from here. * @note This macro can be used to activate a power saving mode. */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -461,7 +558,8 @@ * should be invoked from here. * @note This macro can be used to deactivate a power saving mode. */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -505,6 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/SPI/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/testhal/TIVA/TM4C123x/SPI/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 0af6b44..0000000 --- a/testhal/TIVA/TM4C123x/SPI/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<launchConfiguration type="org.eclipse.ui.externaltools.ProgramLaunchConfigurationType"> -<listAttribute key="org.eclipse.debug.ui.favoriteGroups"> -<listEntry value="org.eclipse.ui.externaltools.launchGroup"/> -</listAttribute> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LAUNCH_CONFIGURATION_BUILD_SCOPE" value="${none}"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LOCATION" value="${eclipse_home}\..\tools\openocd\bin\openocd.exe"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_TOOL_ARGUMENTS" value="-c "telnet_port 4444" -f "interface/ti-icdi.cfg" -f "${file_prompt}""/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_WORKING_DIRECTORY" value="${eclipse_home}\..\tools\openocd\scripts\"/> -</launchConfiguration> diff --git a/testhal/TIVA/TM4C123x/SPI/halconf.h b/testhal/TIVA/TM4C123x/SPI/halconf.h index a8aaed6..51646ad 100644 --- a/testhal/TIVA/TM4C123x/SPI/halconf.h +++ b/testhal/TIVA/TM4C123x/SPI/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _HALCONF_H_ -#define _HALCONF_H_ +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H #include "mcuconf.h" @@ -41,6 +52,20 @@ #endif /** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** * @brief Enables the EXT subsystem. */ #if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) @@ -62,6 +87,13 @@ #endif /** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** * @brief Enables the ICU subsystem. */ #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) @@ -90,6 +122,13 @@ #endif /** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** * @brief Enables the RTC subsystem. */ #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) @@ -138,6 +177,13 @@ #define HAL_USE_USB FALSE #endif +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + /*===========================================================================*/ /* ADC driver related settings. */ /*===========================================================================*/ @@ -170,6 +216,28 @@ #endif /*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ /* I2C driver related settings. */ /*===========================================================================*/ @@ -262,7 +330,7 @@ * @brief Serial buffers size. * @details Configuration parameter, you can change the depth of the queue * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive + * @note The default is 16 bytes for both the transmission and receive * buffers. */ #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) @@ -270,6 +338,29 @@ #endif /*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ /* SPI driver related settings. */ /*===========================================================================*/ @@ -289,6 +380,38 @@ #define SPI_USE_MUTUAL_EXCLUSION TRUE #endif -#endif /* _HALCONF_H_ */ +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* HALCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/SPI/mcuconf.h b/testhal/TIVA/TM4C123x/SPI/mcuconf.h index e936c02..e3c5cb5 100644 --- a/testhal/TIVA/TM4C123x/SPI/mcuconf.h +++ b/testhal/TIVA/TM4C123x/SPI/mcuconf.h @@ -41,14 +41,14 @@ SYSCTL_RCC_PWMDIV_8) /* - * GPIO driver system settings. + * PAL driver system settings. */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE +#define TIVA_PAL_GPIOA_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOB_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOC_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOD_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOE_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOF_IRQ_PRIORITY 3 /* * GPT driver system settings. diff --git a/testhal/TIVA/TM4C123x/EXT/.cproject b/testhal/TIVA/TM4C123x/UART/.cproject index 5aa94c5..19e6606 100644 --- a/testhal/TIVA/TM4C123x/EXT/.cproject +++ b/testhal/TIVA/TM4C123x/UART/.cproject @@ -1,6 +1,5 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<?fileVersion 4.0.0?> -<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> +<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> <storageModule moduleId="org.eclipse.cdt.core.settings"> <cconfiguration id="0.114656749"> <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default"> @@ -22,12 +21,30 @@ <builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/> <tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/> <tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder"> + <option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.1549829577" name="Undefined Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths" valueType="undefIncludePath"> + <listOptionValue builtIn="false" value="C:/ChibiStudio/ChibiOS-Contrib/os/common/ports/ARMCMx/devices/TM4C123x"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/ext/CMSIS/include"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx/compilers/GCC"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx"/> + </option> <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> </tool> <tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder"> + <option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.714763797" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths" valueType="undefIncludePath"> + <listOptionValue builtIn="false" value="C:/ChibiStudio/ChibiOS-Contrib/os/common/ports/ARMCMx/devices/TM4C123x"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/ext/CMSIS/include"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx/compilers/GCC"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx"/> + </option> <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> </tool> <tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder"> + <option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.283012868" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths" valueType="undefIncludePath"> + <listOptionValue builtIn="false" value="C:/ChibiStudio/ChibiOS-Contrib/os/common/ports/ARMCMx/devices/TM4C123x"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/ext/CMSIS/include"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx/compilers/GCC"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx"/> + </option> <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> </tool> </toolChain> @@ -38,7 +55,7 @@ </cconfiguration> </storageModule> <storageModule moduleId="cdtBuildSystem" version="4.0.0"> - <project id="TM4C123x-EXT.null.1703860681" name="TM4C123x-EXT"/> + <project id="TM4C123x-UART.null.1703860681" name="TM4C123x-UART"/> </storageModule> <storageModule moduleId="scannerConfiguration"> <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/> diff --git a/testhal/TIVA/TM4C123x/EXT/.project b/testhal/TIVA/TM4C123x/UART/.project index c1e2c0f..255a370 100644 --- a/testhal/TIVA/TM4C123x/EXT/.project +++ b/testhal/TIVA/TM4C123x/UART/.project @@ -1,6 +1,6 @@ <?xml version="1.0" encoding="UTF-8"?> <projectDescription> - <name>TM4C123x-EXT</name> + <name>TM4C123x-UART</name> <comment></comment> <projects> </projects> diff --git a/testhal/TIVA/TM4C123x/EXT/Makefile b/testhal/TIVA/TM4C123x/UART/Makefile index f2833ec..00661de 100644 --- a/testhal/TIVA/TM4C123x/EXT/Makefile +++ b/testhal/TIVA/TM4C123x/UART/Makefile @@ -71,7 +71,7 @@ endif # Enables the use of FPU on Cortex-M4 (no, softfp, hard). ifeq ($(USE_FPU),) - USE_FPU = hard + USE_FPU = no endif # @@ -88,6 +88,9 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib + +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk # HAL-OSAL files (optional). @@ -105,19 +108,12 @@ LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ +CSRC = $(ALLCSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -140,13 +136,10 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) # # Project, sources and paths @@ -182,10 +175,10 @@ AOPT = TOPT = -mthumb -DTHUMB # Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes # Define C++ warning options here -CPPWARN = -Wall -Wextra +CPPWARN = -Wall -Wextra -Wundef # # Compiler settings diff --git a/testhal/TIVA/TM4C123x/EXT/chconf.h b/testhal/TIVA/TM4C123x/UART/chconf.h index c56df3c..7b3b83f 100644 --- a/testhal/TIVA/TM4C123x/EXT/chconf.h +++ b/testhal/TIVA/TM4C123x/UART/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ #define _CHIBIOS_RT_CONF_VER_5_0_ @@ -38,7 +49,19 @@ * @details Frequency of the system timer that drives the system ticks. This * setting also defines the system tick time unit. */ -#define CH_CFG_ST_FREQUENCY 1000 +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#define CH_CFG_INTERVALS_SIZE 32 + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_TIME_TYPES_SIZE 32 /** * @brief Time delta constant for the tick-less mode. @@ -48,14 +71,7 @@ * The value one is not valid, timeouts are rounded up to * this value. */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 +#define CH_CFG_ST_TIMEDELTA 2 /** @} */ @@ -98,7 +114,8 @@ * @details When this option is activated the function @p chSysInit() * does not spawn the idle thread. The application @p main() * function becomes the idle thread and must implement an - * infinite loop. */ + * infinite loop. + */ #define CH_CFG_NO_IDLE_THREAD FALSE /** @} */ @@ -183,6 +200,16 @@ #define CH_CFG_USE_MUTEXES TRUE /** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** * @brief Conditional Variables APIs. * @details If enabled then the conditional variables APIs are included * in the kernel. @@ -251,14 +278,6 @@ #define CH_CFG_USE_MAILBOXES TRUE /** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** * @brief Core Memory Manager APIs. * @details If enabled then the core memory manager APIs are included * in the kernel. @@ -289,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE /** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_OBJ_FIFOS TRUE + +/** * @brief Dynamic Threads APIs. * @details If enabled then the dynamic threads creation APIs are included * in the kernel. @@ -303,6 +331,56 @@ /*===========================================================================*/ /** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#define CH_CFG_USE_FACTORY TRUE + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 + +/** + * @brief Enables the registry of generic objects. + */ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE + +/** + * @brief Enables factory for generic buffers. + */ +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE + +/** + * @brief Enables factory for semaphores. + */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE + +/** + * @brief Enables factory for mailboxes. + */ +#define CH_CFG_FACTORY_MAILBOXES TRUE + +/** + * @brief Enables factory for objects FIFOs. + */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE + +/** @} */ + +/*===========================================================================*/ +/** * @name Debug options * @{ */ @@ -345,12 +423,18 @@ /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE FALSE +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 /** * @brief Debug option, stack checks. @@ -395,6 +479,22 @@ /*===========================================================================*/ /** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. */ @@ -403,9 +503,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -415,10 +515,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -429,7 +525,7 @@ * @details This hook is invoked just before switching between threads. */ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ + /* Context switch code here.*/ \ } /** @@ -452,7 +548,8 @@ * should be invoked from here. * @note This macro can be used to activate a power saving mode. */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -461,7 +558,8 @@ * should be invoked from here. * @note This macro can be used to deactivate a power saving mode. */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -505,6 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/EXT/debug/TM4C123x-EXT (OpenOCD, Flash and Run).launch b/testhal/TIVA/TM4C123x/UART/debug/TM4C123x-UART (OpenOCD, Flash and Run).launch index d963642..6e2f16c 100644 --- a/testhal/TIVA/TM4C123x/EXT/debug/TM4C123x-EXT (OpenOCD, Flash and Run).launch +++ b/testhal/TIVA/TM4C123x/UART/debug/TM4C123x-UART (OpenOCD, Flash and Run).launch @@ -1,6 +1,6 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> <launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType"> -<stringAttribute key="bad_container_name" value="\TM4C123x-\debug"/> +<stringAttribute key="bad_container_name" value="\TM4C123x-UART\debug"/> <intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/> <booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/> <booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/> @@ -33,15 +33,15 @@ <intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/> <stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/> <stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/> -<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?><contentList><content id="dmachis-spi_serve_interrupt-(format)" val="0"/></contentList>"/> +<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?><contentList/>"/> <stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <globalVariableList/> "/> <stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <memoryBlockExpressionList/> "/> <stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/> -<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="TM4C123x-EXT"/> +<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="TM4C123x-UART"/> <booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/> <stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/> <listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS"> -<listEntry value="/TM4C123x-EXT"/> +<listEntry value="/TM4C123x-UART"/> </listAttribute> <listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES"> <listEntry value="4"/> diff --git a/testhal/TIVA/TM4C123x/EXT/halconf.h b/testhal/TIVA/TM4C123x/UART/halconf.h index 6e763ee..bc70eff 100644 --- a/testhal/TIVA/TM4C123x/EXT/halconf.h +++ b/testhal/TIVA/TM4C123x/UART/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _HALCONF_H_ -#define _HALCONF_H_ +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H #include "mcuconf.h" @@ -41,10 +52,24 @@ #endif /** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** * @brief Enables the EXT subsystem. */ #if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE +#define HAL_USE_EXT FALSE #endif /** @@ -62,6 +87,13 @@ #endif /** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** * @brief Enables the ICU subsystem. */ #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) @@ -90,6 +122,13 @@ #endif /** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** * @brief Enables the RTC subsystem. */ #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) @@ -128,7 +167,7 @@ * @brief Enables the UART subsystem. */ #if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE +#define HAL_USE_UART TRUE #endif /** @@ -138,6 +177,13 @@ #define HAL_USE_USB FALSE #endif +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + /*===========================================================================*/ /* ADC driver related settings. */ /*===========================================================================*/ @@ -170,6 +216,28 @@ #endif /*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ /* I2C driver related settings. */ /*===========================================================================*/ @@ -262,7 +330,7 @@ * @brief Serial buffers size. * @details Configuration parameter, you can change the depth of the queue * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive + * @note The default is 16 bytes for both the transmission and receive * buffers. */ #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) @@ -270,6 +338,29 @@ #endif /*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ /* SPI driver related settings. */ /*===========================================================================*/ @@ -289,6 +380,38 @@ #define SPI_USE_MUTUAL_EXCLUSION TRUE #endif -#endif /* _HALCONF_H_ */ +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* HALCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/UART/main.c b/testhal/TIVA/TM4C123x/UART/main.c new file mode 100644 index 0000000..d3b48bc --- /dev/null +++ b/testhal/TIVA/TM4C123x/UART/main.c @@ -0,0 +1,146 @@ +/* + ChibiOS - Copyright (C) 2006..2017 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +static virtual_timer_t vt1, vt2; + +static void restart(void *p) { + + (void)p; + + chSysLockFromISR(); + uartStartSendI(&UARTD1, 14, "Hello World!\r\n"); + chSysUnlockFromISR(); +} + +static void ledoff(void *p) { + + (void)p; + palClearLine(LINE_LED_RED); +} + +/* + * This callback is invoked when a transmission buffer has been completely + * read by the driver. + */ +static void txend1(UARTDriver *uartp) { + + (void)uartp; + palSetLine(LINE_LED_RED); +} + +/* + * This callback is invoked when a transmission has physically completed. + */ +static void txend2(UARTDriver *uartp) { + + (void)uartp; + palClearLine(LINE_LED_RED); + chSysLockFromISR(); + chVTResetI(&vt1); + chVTSetI(&vt1, OSAL_MS2I(5000), restart, NULL); + chSysUnlockFromISR(); +} + +/* + * This callback is invoked on a receive error, the errors mask is passed + * as parameter. + */ +static void rxerr(UARTDriver *uartp, uartflags_t e) { + + (void)uartp; + (void)e; +} + +/* + * This callback is invoked when a character is received but the application + * was not ready to receive it, the character is passed as parameter. + */ +static void rxchar(UARTDriver *uartp, uint16_t c) { + + (void)uartp; + (void)c; + /* Flashing the LED each time a character is received.*/ + palSetLine(LINE_LED_RED); + chSysLockFromISR(); + chVTResetI(&vt2); + chVTSetI(&vt2, OSAL_MS2I(200), ledoff, NULL); + chSysUnlockFromISR(); +} + +/* + * This callback is invoked when a receive buffer has been completely written. + */ +static void rxend(UARTDriver *uartp) { + + (void)uartp; +} + +/* + * UART driver configuration structure. + */ +static UARTConfig uart_cfg_1 = { + txend1, + txend2, + rxend, + rxchar, + rxerr, + 38400, + 0, + UART_LCRH_FEN | UART_LCRH_WLEN_8, + UART_IFLS_TX4_8 | UART_IFLS_RX4_8, + UART_CC_CS_SYSCLK +}; + +/* + * Application entry point. + */ +int main(void) +{ + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + palSetLineMode(LINE_UART0_RX, PAL_MODE_INPUT | PAL_MODE_ALTERNATE(1)); + palSetLineMode(LINE_UART0_TX, PAL_MODE_INPUT | PAL_MODE_ALTERNATE(1)); + + palSetLineMode(LINE_LED_RED, PAL_MODE_OUTPUT_PUSHPULL); + + /* + * Activates the uart driver 1. + */ + uartStart(&UARTD1, &uart_cfg_1); + + /* + * Starts the transmission, it will be handled entirely in background. + */ + uartStartSend(&UARTD1, 13, "Starting...\r\n"); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (true) { + chThdSleepMilliseconds(5000); + } +} diff --git a/testhal/TIVA/TM4C123x/EXT/mcuconf.h b/testhal/TIVA/TM4C123x/UART/mcuconf.h index e936c02..fcbf4a9 100644 --- a/testhal/TIVA/TM4C123x/EXT/mcuconf.h +++ b/testhal/TIVA/TM4C123x/UART/mcuconf.h @@ -41,14 +41,14 @@ SYSCTL_RCC_PWMDIV_8) /* - * GPIO driver system settings. + * PAL driver system settings. */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE +#define TIVA_PAL_GPIOA_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOB_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOC_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOD_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOE_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOF_IRQ_PRIORITY 3 /* * GPT driver system settings. @@ -136,28 +136,56 @@ #define TIVA_SERIAL_UART7_PRIORITY 5 /* - * SPI driver system settings. + * UART driver system settings. */ -#define TIVA_SPI_USE_SSI0 TRUE -#define TIVA_SPI_USE_SSI1 FALSE -#define TIVA_SPI_USE_SSI2 FALSE -#define TIVA_SPI_USE_SSI3 FALSE -#define TIVA_SPI_SSI0_RX_UDMA_CHANNEL 10 -#define TIVA_SPI_SSI1_RX_UDMA_CHANNEL 24 -#define TIVA_SPI_SSI2_RX_UDMA_CHANNEL 12 -#define TIVA_SPI_SSI3_RX_UDMA_CHANNEL 14 -#define TIVA_SPI_SSI0_TX_UDMA_CHANNEL 11 -#define TIVA_SPI_SSI1_TX_UDMA_CHANNEL 25 -#define TIVA_SPI_SSI2_TX_UDMA_CHANNEL 13 -#define TIVA_SPI_SSI3_TX_UDMA_CHANNEL 15 -#define TIVA_SPI_SSI0_RX_UDMA_MAPPING 0 -#define TIVA_SPI_SSI1_RX_UDMA_MAPPING 0 -#define TIVA_SPI_SSI2_RX_UDMA_MAPPING 2 -#define TIVA_SPI_SSI3_RX_UDMA_MAPPING 2 -#define TIVA_SPI_SSI0_TX_UDMA_MAPPING 0 -#define TIVA_SPI_SSI1_TX_UDMA_MAPPING 0 -#define TIVA_SPI_SSI2_TX_UDMA_MAPPING 2 -#define TIVA_SPI_SSI3_TX_UDMA_MAPPING 2 +#define TIVA_UART_USE_UART0 TRUE +#define TIVA_UART_USE_UART1 FALSE +#define TIVA_UART_USE_UART2 FALSE +#define TIVA_UART_USE_UART3 FALSE +#define TIVA_UART_USE_UART4 FALSE +#define TIVA_UART_USE_UART5 FALSE +#define TIVA_UART_USE_UART6 FALSE +#define TIVA_UART_USE_UART7 FALSE +#define TIVA_UART_UART0_PRIORITY 5 +#define TIVA_UART_UART1_PRIORITY 5 +#define TIVA_UART_UART2_PRIORITY 5 +#define TIVA_UART_UART3_PRIORITY 5 +#define TIVA_UART_UART4_PRIORITY 5 +#define TIVA_UART_UART5_PRIORITY 5 +#define TIVA_UART_UART6_PRIORITY 5 +#define TIVA_UART_UART7_PRIORITY 5 +#define TIVA_UART_UART0_RX_UDMA_CHANNEL 8 +#define TIVA_UART_UART1_RX_UDMA_CHANNEL 22 +#define TIVA_UART_UART2_RX_UDMA_CHANNEL 0 +#define TIVA_UART_UART3_RX_UDMA_CHANNEL 16 +#define TIVA_UART_UART4_RX_UDMA_CHANNEL 18 +#define TIVA_UART_UART5_RX_UDMA_CHANNEL 6 +#define TIVA_UART_UART6_RX_UDMA_CHANNEL 10 +#define TIVA_UART_UART7_RX_UDMA_CHANNEL 20 +#define TIVA_UART_UART0_TX_UDMA_CHANNEL 9 +#define TIVA_UART_UART1_TX_UDMA_CHANNEL 23 +#define TIVA_UART_UART2_TX_UDMA_CHANNEL 1 +#define TIVA_UART_UART3_TX_UDMA_CHANNEL 17 +#define TIVA_UART_UART4_TX_UDMA_CHANNEL 19 +#define TIVA_UART_UART5_TX_UDMA_CHANNEL 7 +#define TIVA_UART_UART6_TX_UDMA_CHANNEL 11 +#define TIVA_UART_UART7_TX_UDMA_CHANNEL 21 +#define TIVA_UART_UART0_RX_UDMA_MAPPING 0 +#define TIVA_UART_UART1_RX_UDMA_MAPPING 0 +#define TIVA_UART_UART2_RX_UDMA_MAPPING 1 +#define TIVA_UART_UART3_RX_UDMA_MAPPING 2 +#define TIVA_UART_UART4_RX_UDMA_MAPPING 2 +#define TIVA_UART_UART5_RX_UDMA_MAPPING 2 +#define TIVA_UART_UART6_RX_UDMA_MAPPING 2 +#define TIVA_UART_UART7_RX_UDMA_MAPPING 2 +#define TIVA_UART_UART0_TX_UDMA_MAPPING 0 +#define TIVA_UART_UART1_TX_UDMA_MAPPING 0 +#define TIVA_UART_UART2_TX_UDMA_MAPPING 1 +#define TIVA_UART_UART3_TX_UDMA_MAPPING 2 +#define TIVA_UART_UART4_TX_UDMA_MAPPING 2 +#define TIVA_UART_UART5_TX_UDMA_MAPPING 2 +#define TIVA_UART_UART6_TX_UDMA_MAPPING 2 +#define TIVA_UART_UART7_TX_UDMA_MAPPING 2 /* * ST driver system settings. diff --git a/testhal/TIVA/TM4C123x/WDG/Makefile b/testhal/TIVA/TM4C123x/WDG/Makefile index f2833ec..00661de 100644 --- a/testhal/TIVA/TM4C123x/WDG/Makefile +++ b/testhal/TIVA/TM4C123x/WDG/Makefile @@ -71,7 +71,7 @@ endif # Enables the use of FPU on Cortex-M4 (no, softfp, hard). ifeq ($(USE_FPU),) - USE_FPU = hard + USE_FPU = no endif # @@ -88,6 +88,9 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib + +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk # HAL-OSAL files (optional). @@ -105,19 +108,12 @@ LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ +CSRC = $(ALLCSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -140,13 +136,10 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) # # Project, sources and paths @@ -182,10 +175,10 @@ AOPT = TOPT = -mthumb -DTHUMB # Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes # Define C++ warning options here -CPPWARN = -Wall -Wextra +CPPWARN = -Wall -Wextra -Wundef # # Compiler settings diff --git a/testhal/TIVA/TM4C123x/WDG/chconf.h b/testhal/TIVA/TM4C123x/WDG/chconf.h index 0d24275..7b3b83f 100644 --- a/testhal/TIVA/TM4C123x/WDG/chconf.h +++ b/testhal/TIVA/TM4C123x/WDG/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ #define _CHIBIOS_RT_CONF_VER_5_0_ @@ -41,6 +52,18 @@ #define CH_CFG_ST_FREQUENCY 10000 /** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#define CH_CFG_INTERVALS_SIZE 32 + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_TIME_TYPES_SIZE 32 + +/** * @brief Time delta constant for the tick-less mode. * @note If this value is zero then the system uses the classic * periodic tick. This value represents the minimum number @@ -48,14 +71,7 @@ * The value one is not valid, timeouts are rounded up to * this value. */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 +#define CH_CFG_ST_TIMEDELTA 2 /** @} */ @@ -98,7 +114,8 @@ * @details When this option is activated the function @p chSysInit() * does not spawn the idle thread. The application @p main() * function becomes the idle thread and must implement an - * infinite loop. */ + * infinite loop. + */ #define CH_CFG_NO_IDLE_THREAD FALSE /** @} */ @@ -183,6 +200,16 @@ #define CH_CFG_USE_MUTEXES TRUE /** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** * @brief Conditional Variables APIs. * @details If enabled then the conditional variables APIs are included * in the kernel. @@ -251,14 +278,6 @@ #define CH_CFG_USE_MAILBOXES TRUE /** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** * @brief Core Memory Manager APIs. * @details If enabled then the core memory manager APIs are included * in the kernel. @@ -289,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE /** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_OBJ_FIFOS TRUE + +/** * @brief Dynamic Threads APIs. * @details If enabled then the dynamic threads creation APIs are included * in the kernel. @@ -303,6 +331,56 @@ /*===========================================================================*/ /** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#define CH_CFG_USE_FACTORY TRUE + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 + +/** + * @brief Enables the registry of generic objects. + */ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE + +/** + * @brief Enables factory for generic buffers. + */ +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE + +/** + * @brief Enables factory for semaphores. + */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE + +/** + * @brief Enables factory for mailboxes. + */ +#define CH_CFG_FACTORY_MAILBOXES TRUE + +/** + * @brief Enables factory for objects FIFOs. + */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE + +/** @} */ + +/*===========================================================================*/ +/** * @name Debug options * @{ */ @@ -345,12 +423,18 @@ /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE FALSE +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 /** * @brief Debug option, stack checks. @@ -395,6 +479,22 @@ /*===========================================================================*/ /** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. */ @@ -403,9 +503,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -415,10 +515,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -429,7 +525,7 @@ * @details This hook is invoked just before switching between threads. */ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ + /* Context switch code here.*/ \ } /** @@ -452,7 +548,8 @@ * should be invoked from here. * @note This macro can be used to activate a power saving mode. */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -461,7 +558,8 @@ * should be invoked from here. * @note This macro can be used to deactivate a power saving mode. */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -505,6 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/WDG/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/testhal/TIVA/TM4C123x/WDG/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 0af6b44..0000000 --- a/testhal/TIVA/TM4C123x/WDG/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<launchConfiguration type="org.eclipse.ui.externaltools.ProgramLaunchConfigurationType"> -<listAttribute key="org.eclipse.debug.ui.favoriteGroups"> -<listEntry value="org.eclipse.ui.externaltools.launchGroup"/> -</listAttribute> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LAUNCH_CONFIGURATION_BUILD_SCOPE" value="${none}"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LOCATION" value="${eclipse_home}\..\tools\openocd\bin\openocd.exe"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_TOOL_ARGUMENTS" value="-c "telnet_port 4444" -f "interface/ti-icdi.cfg" -f "${file_prompt}""/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_WORKING_DIRECTORY" value="${eclipse_home}\..\tools\openocd\scripts\"/> -</launchConfiguration> diff --git a/testhal/TIVA/TM4C123x/WDG/halconf.h b/testhal/TIVA/TM4C123x/WDG/halconf.h index 2da5421..0a72dc9 100644 --- a/testhal/TIVA/TM4C123x/WDG/halconf.h +++ b/testhal/TIVA/TM4C123x/WDG/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _HALCONF_H_ -#define _HALCONF_H_ +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H #include "mcuconf.h" @@ -41,6 +52,20 @@ #endif /** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** * @brief Enables the EXT subsystem. */ #if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) @@ -62,6 +87,13 @@ #endif /** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** * @brief Enables the ICU subsystem. */ #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) @@ -90,6 +122,13 @@ #endif /** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** * @brief Enables the RTC subsystem. */ #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) @@ -177,6 +216,28 @@ #endif /*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ /* I2C driver related settings. */ /*===========================================================================*/ @@ -269,7 +330,7 @@ * @brief Serial buffers size. * @details Configuration parameter, you can change the depth of the queue * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive + * @note The default is 16 bytes for both the transmission and receive * buffers. */ #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) @@ -277,6 +338,29 @@ #endif /*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ /* SPI driver related settings. */ /*===========================================================================*/ @@ -296,6 +380,38 @@ #define SPI_USE_MUTUAL_EXCLUSION TRUE #endif -#endif /* _HALCONF_H_ */ +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* HALCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/WDG/mcuconf.h b/testhal/TIVA/TM4C123x/WDG/mcuconf.h index 3f9030b..7f4af4f 100644 --- a/testhal/TIVA/TM4C123x/WDG/mcuconf.h +++ b/testhal/TIVA/TM4C123x/WDG/mcuconf.h @@ -44,14 +44,14 @@ SYSCTL_RCC_PWMDIV_8) /* - * GPIO driver system settings. + * PAL driver system settings. */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE +#define TIVA_PAL_GPIOA_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOB_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOC_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOD_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOE_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOF_IRQ_PRIORITY 3 /* * GPT driver system settings. |