Added a check on PAL enable.

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@2510 35acf78f-673a-0410-8e92-d51de3d6d3f4

9 files changed, 18 insertions, 0 deletions

diff --git a/boards/EA_LPCXPRESSO_BB_1114/board.c b/boards/EA_LPCXPRESSO_BB_1114/board.c
index 68e8efc05..cb9116eed 100644
--- a/boards/EA_LPCXPRESSO_BB_1114/board.c
+++ b/boards/EA_LPCXPRESSO_BB_1114/board.c
@@ -25,12 +25,14 @@
  * @details Digital I/O ports static configuration as defined in @p board.h.

  *          This variable is used by the HAL when initializing the PAL driver.

  */

+#if HAL_USE_PAL || defined(__DOXYGEN__)

 const PALConfig pal_default_config = {

  {VAL_GPIO0DATA, VAL_GPIO0DIR},

  {VAL_GPIO1DATA, VAL_GPIO1DIR},

  {VAL_GPIO2DATA, VAL_GPIO2DIR},

  {VAL_GPIO3DATA, VAL_GPIO3DIR},

 };

+#endif

 

 /*

  * Early initialization code.

diff --git a/boards/EA_LPCXPRESSO_BB_1343/board.c b/boards/EA_LPCXPRESSO_BB_1343/board.c
index a7844e76a..ea5c29f34 100644
--- a/boards/EA_LPCXPRESSO_BB_1343/board.c
+++ b/boards/EA_LPCXPRESSO_BB_1343/board.c
@@ -25,12 +25,14 @@
  * @details Digital I/O ports static configuration as defined in @p board.h.

  *          This variable is used by the HAL when initializing the PAL driver.

  */

+#if HAL_USE_PAL || defined(__DOXYGEN__)

 const PALConfig pal_default_config = {

  {VAL_GPIO0DATA, VAL_GPIO0DIR},

  {VAL_GPIO1DATA, VAL_GPIO1DIR},

  {VAL_GPIO2DATA, VAL_GPIO2DIR},

  {VAL_GPIO3DATA, VAL_GPIO3DIR},

 };

+#endif

 

 /*

  * Early initialization code.

diff --git a/boards/OLIMEX_LPC_P2148/board.c b/boards/OLIMEX_LPC_P2148/board.c
index 45c492cbf..4b9a2205d 100644
--- a/boards/OLIMEX_LPC_P2148/board.c
+++ b/boards/OLIMEX_LPC_P2148/board.c
@@ -27,6 +27,7 @@
  * @details Digital I/O ports static configuration as defined in @p board.h.

  *          This variable is used by the HAL when initializing the PAL driver.

  */

+#if HAL_USE_PAL || defined(__DOXYGEN__)

 const PALConfig pal_default_config =

 {

   VAL_PINSEL0,

@@ -35,6 +36,7 @@ const PALConfig pal_default_config =
   {VAL_FIO0PIN, VAL_FIO0DIR},

   {VAL_FIO1PIN, VAL_FIO1DIR}

 };

+#endif

 

 /*

  * Timer 0 IRQ handling here.

diff --git a/boards/OLIMEX_MSP430_P1611/board.c b/boards/OLIMEX_MSP430_P1611/board.c
index 558110376..405d0deb7 100644
--- a/boards/OLIMEX_MSP430_P1611/board.c
+++ b/boards/OLIMEX_MSP430_P1611/board.c
@@ -27,6 +27,7 @@
  * @details Digital I/O ports static configuration as defined in @p board.h.

  *          This variable is used by the HAL when initializing the PAL driver.

  */

+#if HAL_USE_PAL || defined(__DOXYGEN__)

 const PALConfig pal_default_config =

 {

 #if defined(__MSP430_HAS_PORT1__) || defined(__MSP430_HAS_PORT1_R__)

@@ -48,6 +49,7 @@ const PALConfig pal_default_config =
   {VAL_P6OUT, VAL_P6DIR},

 #endif

 };

+#endif

 

 CH_IRQ_HANDLER(TIMERA0_VECTOR) {

 

diff --git a/boards/OLIMEX_SAM7_EX256/board.c b/boards/OLIMEX_SAM7_EX256/board.c
index e13a05420..5445739ed 100644
--- a/boards/OLIMEX_SAM7_EX256/board.c
+++ b/boards/OLIMEX_SAM7_EX256/board.c
@@ -25,6 +25,7 @@
  * @details Digital I/O ports static configuration as defined in @p board.h.

  *          This variable is used by the HAL when initializing the PAL driver.

  */

+#if HAL_USE_PAL || defined(__DOXYGEN__)

 const PALConfig pal_default_config =

 {

   {VAL_PIOA_ODSR, VAL_PIOA_OSR, VAL_PIOA_PUSR},

@@ -33,6 +34,7 @@ const PALConfig pal_default_config =
   {VAL_PIOB_ODSR, VAL_PIOB_OSR, VAL_PIOB_PUSR}

 #endif

 };

+#endif

 

 /*

  * SYS IRQ handling here.

diff --git a/boards/OLIMEX_SAM7_P256/board.c b/boards/OLIMEX_SAM7_P256/board.c
index cd9a43873..2e11abafb 100644
--- a/boards/OLIMEX_SAM7_P256/board.c
+++ b/boards/OLIMEX_SAM7_P256/board.c
@@ -25,6 +25,7 @@
  * @details Digital I/O ports static configuration as defined in @p board.h.

  *          This variable is used by the HAL when initializing the PAL driver.

  */

+#if HAL_USE_PAL || defined(__DOXYGEN__)

 const PALConfig pal_default_config =

 {

   {VAL_PIOA_ODSR, VAL_PIOA_OSR, VAL_PIOA_PUSR},

@@ -33,6 +34,7 @@ const PALConfig pal_default_config =
   {VAL_PIOB_ODSR, VAL_PIOB_OSR, VAL_PIOB_PUSR}

 #endif

 };

+#endif

 

 /*

  * SYS IRQ handling here.

diff --git a/boards/OLIMEX_STM32_H103/board.c b/boards/OLIMEX_STM32_H103/board.c
index e380b8b9a..05faa0944 100644
--- a/boards/OLIMEX_STM32_H103/board.c
+++ b/boards/OLIMEX_STM32_H103/board.c
@@ -25,6 +25,7 @@
  * @details Digital I/O ports static configuration as defined in @p board.h.

  *          This variable is used by the HAL when initializing the PAL driver.

  */

+#if HAL_USE_PAL || defined(__DOXYGEN__)

 const PALConfig pal_default_config =

 {

   {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},

@@ -33,6 +34,7 @@ const PALConfig pal_default_config =
   {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},

   {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},

 };

+#endif

 

 /*

  * Early initialization code.

diff --git a/boards/ST_STM3210C_EVAL/board.c b/boards/ST_STM3210C_EVAL/board.c
index 4b907f5ed..ac1564257 100644
--- a/boards/ST_STM3210C_EVAL/board.c
+++ b/boards/ST_STM3210C_EVAL/board.c
@@ -25,6 +25,7 @@
  * @details Digital I/O ports static configuration as defined in @p board.h.

  *          This variable is used by the HAL when initializing the PAL driver.

  */

+#if HAL_USE_PAL || defined(__DOXYGEN__)

 const PALConfig pal_default_config =

 {

   {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},

@@ -33,6 +34,7 @@ const PALConfig pal_default_config =
   {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},

   {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},

 };

+#endif

 

 /*

  * Early initialization code.

diff --git a/boards/ST_STM32VL_DISCOVERY/board.c b/boards/ST_STM32VL_DISCOVERY/board.c
index e380b8b9a..05faa0944 100644
--- a/boards/ST_STM32VL_DISCOVERY/board.c
+++ b/boards/ST_STM32VL_DISCOVERY/board.c
@@ -25,6 +25,7 @@
  * @details Digital I/O ports static configuration as defined in @p board.h.

  *          This variable is used by the HAL when initializing the PAL driver.

  */

+#if HAL_USE_PAL || defined(__DOXYGEN__)

 const PALConfig pal_default_config =

 {

   {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},

@@ -33,6 +34,7 @@ const PALConfig pal_default_config =
   {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},

   {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},

 };

+#endif

 

 /*

  * Early initialization code.