diff options
| author | gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4> | 2014-05-07 08:11:03 +0000 |
|---|---|---|
| committer | gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4> | 2014-05-07 08:11:03 +0000 |
| commit | bec915e05274a94f2b1a5e2443f04de826dd1f6e (patch) | |
| tree | cec2044911766f5dc5a7bd8b8c9ffe0fe81734f8 /os/hal/boards/ST_EVB_SPC560D/board.c | |
| parent | 4afa0b98dff9eac6a94c104acf900e15147d2da3 (diff) | |
| parent | b43c71424d201583822b26d13d11f7e3634cb515 (diff) | |
| download | ChibiOS-bec915e05274a94f2b1a5e2443f04de826dd1f6e.tar.gz ChibiOS-bec915e05274a94f2b1a5e2443f04de826dd1f6e.tar.bz2 ChibiOS-bec915e05274a94f2b1a5e2443f04de826dd1f6e.zip | |
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@6916 35acf78f-673a-0410-8e92-d51de3d6d3f4
Diffstat (limited to 'os/hal/boards/ST_EVB_SPC560D/board.c')
| -rw-r--r-- | os/hal/boards/ST_EVB_SPC560D/board.c | 71 |
1 files changed, 71 insertions, 0 deletions
diff --git a/os/hal/boards/ST_EVB_SPC560D/board.c b/os/hal/boards/ST_EVB_SPC560D/board.c new file mode 100644 index 000000000..f59eed54f --- /dev/null +++ b/os/hal/boards/ST_EVB_SPC560D/board.c @@ -0,0 +1,71 @@ +/*
+ SPC5 HAL - Copyright (C) 2013 STMicroelectronics
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/* Initial setup of all defined pads, the list is terminated by a {-1, 0, 0}.*/
+static const spc_siu_init_t spc_siu_init[] = {
+ {PCR(PORT_B, PB_LIN0_TDX), PAL_HIGH, PAL_MODE_OUTPUT_ALTERNATE(1)},
+ {PCR(PORT_B, PB_LIN0_RDX), PAL_HIGH, PAL_MODE_INPUT},
+ {PCR(PORT_E, PE_BUTTON1), PAL_LOW, PAL_MODE_INPUT},
+ {PCR(PORT_E, PE_BUTTON2), PAL_LOW, PAL_MODE_INPUT},
+ {PCR(PORT_E, PE_BUTTON3), PAL_LOW, PAL_MODE_INPUT},
+ {PCR(PORT_E, PE_BUTTON4), PAL_LOW, PAL_MODE_INPUT},
+ {PCR(PORT_E, PE_LED1), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
+ {PCR(PORT_E, PE_LED2), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
+ {PCR(PORT_E, PE_LED3), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
+ {PCR(PORT_E, PE_LED4), PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
+ {-1, 0, 0}
+};
+
+/* Initialization array for the PSMI registers.*/
+static const uint8_t spc_padsels_init[SPC5_SIUL_NUM_PADSELS] = {
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0,
+};
+
+/**
+ * @brief PAL setup.
+ */
+const PALConfig pal_default_config = {
+ PAL_MODE_UNCONNECTED,
+ spc_siu_init,
+ spc_padsels_init
+};
+#endif
+
+/*
+ * Early initialization code.
+ * This initialization must be performed just after stack setup and before
+ * any other initialization.
+ */
+void __early_init(void) {
+
+ spc_clock_init();
+}
+
+/*
+ * Board-specific initialization code.
+ */
+void boardInit(void) {
+}
|