diff options
| author | gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4> | 2014-05-07 08:11:03 +0000 |
|---|---|---|
| committer | gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4> | 2014-05-07 08:11:03 +0000 |
| commit | bec915e05274a94f2b1a5e2443f04de826dd1f6e (patch) | |
| tree | cec2044911766f5dc5a7bd8b8c9ffe0fe81734f8 /os/hal/platforms/LPC8xx/pal_lld.c | |
| parent | 4afa0b98dff9eac6a94c104acf900e15147d2da3 (diff) | |
| parent | b43c71424d201583822b26d13d11f7e3634cb515 (diff) | |
| download | ChibiOS-bec915e05274a94f2b1a5e2443f04de826dd1f6e.tar.gz ChibiOS-bec915e05274a94f2b1a5e2443f04de826dd1f6e.tar.bz2 ChibiOS-bec915e05274a94f2b1a5e2443f04de826dd1f6e.zip | |
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@6916 35acf78f-673a-0410-8e92-d51de3d6d3f4
Diffstat (limited to 'os/hal/platforms/LPC8xx/pal_lld.c')
| -rw-r--r-- | os/hal/platforms/LPC8xx/pal_lld.c | 105 |
1 files changed, 0 insertions, 105 deletions
diff --git a/os/hal/platforms/LPC8xx/pal_lld.c b/os/hal/platforms/LPC8xx/pal_lld.c deleted file mode 100644 index 7f290db8f..000000000 --- a/os/hal/platforms/LPC8xx/pal_lld.c +++ /dev/null @@ -1,105 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file LPC8xx/pal_lld.c
- * @brief LPC8xx GPIO low level driver code.
- *
- * @addtogroup PAL
- * @{
- */
-
-#include "ch.h"
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local variables. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-/**
- * @brief LPC8xx I/O ports configuration.
- * @details GPIO unit registers initialization.
- *
- * @param[in] config the LPC8xx ports configuration
- *
- * @notapi
- */
-void _pal_lld_init(const PALConfig *config) {
-
- /* Enable clocks to GPIO */
- LPC_SYSCON->SYSAHBCLKCTRL |= (1<<6);
-
- LPC_GPIO_PORT->DIR0 = config->dir;
- LPC_GPIO_PORT->PIN0 = config->data;
-}
-
-/**
- * @brief Pads mode setup.
- * @details This function programs a pads group belonging to the same port
- * with the specified mode.
- * @note @p PAL_MODE_UNCONNECTED is implemented as push pull output with
- * high state.
- * @note This function does not alter the @p PINSELx registers. Alternate
- * functions setup must be handled by device-specific code.
- *
- * @param[in] port the port identifier
- * @param[in] mask the group mask
- * @param[in] mode the mode
- *
- * @notapi
- */
-void _pal_lld_setgroupmode(ioportid_t port,
- ioportmask_t mask,
- iomode_t mode) {
-
- switch (mode)
- {
- case PAL_MODE_RESET:
- case PAL_MODE_INPUT:
- port->DIR0 &= ~mask;
- break;
-
- case PAL_MODE_UNCONNECTED:
- palSetPort(port, PAL_WHOLE_PORT);
- //no break
- case PAL_MODE_OUTPUT_PUSHPULL:
- port->DIR0 |= mask;
- break;
- }
-
- return;
-}
-
-#endif /* HAL_USE_PAL */
-
-/** @} */
|