AVR: Add a testhal demo for XMEGA128U4A for OSLIB test suite.

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@11509 35acf78f-673a-0410-8e92-d51de3d6d3f4

1 files changed, 151 insertions, 0 deletions

diff --git a/testhal/AVR/XMEGA/TEST-SUITE-OSLIB/mcuconf.h b/testhal/AVR/XMEGA/TEST-SUITE-OSLIB/mcuconf.h
new file mode 100644
index 000000000..b4d5ab3df
--- /dev/null
+++ b/testhal/AVR/XMEGA/TEST-SUITE-OSLIB/mcuconf.h
@@ -0,0 +1,151 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * AVR drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the driver
+ * is enabled in halconf.h.
+ */
+
+/*
+ * ADC driver system settings.
+ */
+#define AVR_ADC_USE_ADC1                   FALSE
+
+/*
+ * DAC driver system settings.
+ */
+#define AVR_DAC_USE_DAC1                   TRUE
+
+/*
+ * EXT drivers system settings.
+ */
+#define AVR_EXT_USE_INT0                   FALSE
+#define AVR_EXT_USE_INT1                   FALSE
+#define AVR_EXT_USE_INT2                   FALSE
+#define AVR_EXT_USE_INT3                   FALSE
+#define AVR_EXT_USE_INT4                   FALSE
+#define AVR_EXT_USE_INT5                   FALSE
+
+/*
+ * PCINT driver system settings.
+ */
+#define AVR_EXT_USE_PCINT0                 FALSE
+#define AVR_EXT_USE_PCINT1                 FALSE
+#define AVR_EXT_USE_PCINT2                 FALSE
+#define AVR_EXT_USE_PCINT3                 FALSE
+#define AVR_EXT_USE_PCINT4                 FALSE
+#define AVR_EXT_USE_PCINT5                 FALSE
+#define AVR_EXT_USE_PCINT6                 FALSE
+#define AVR_EXT_USE_PCINT7                 FALSE
+#define AVR_EXT_USE_PCINT8                 FALSE
+#define AVR_EXT_USE_PCINT9                 FALSE
+#define AVR_EXT_USE_PCINT10                FALSE
+
+/*
+ * CAN driver system settings.
+ */
+
+/*
+ * MAC driver system settings.
+ */
+
+/*
+ * PWM driver system settings.
+ */
+#define AVR_PWM_USE_TIM1                   FALSE
+#define AVR_PWM_USE_TIM2                   FALSE
+#define AVR_PWM_USE_TIM3                   FALSE
+#define AVR_PWM_USE_TIM4                   FALSE
+#define AVR_PWM_USE_TIM5                   FALSE
+
+/*
+ * ICU driver system settings.
+ */
+#define AVR_ICU_USE_TIM1                   FALSE
+#define AVR_ICU_USE_TIM3                   FALSE
+#define AVR_ICU_USE_TIM4                   FALSE
+#define AVR_ICU_USE_TIM5                   FALSE
+
+/*
+ * GPT driver system settings.
+ */
+#define AVR_GPT_USE_TIM1                   FALSE
+#define AVR_GPT_USE_TIM2                   FALSE
+#define AVR_GPT_USE_TIM3                   FALSE
+#define AVR_GPT_USE_TIM4                   FALSE
+#define AVR_GPT_USE_TIM5                   FALSE
+
+/*
+ * SERIAL driver system settings.
+ */
+#define AVR_SERIAL_USE_USART1              TRUE   /* USARTC0. */
+#define AVR_SERIAL_USE_USART2              FALSE  /* USARTC1. */
+#define AVR_SERIAL_USE_USART3              FALSE  /* USARTD0. */
+#define AVR_SERIAL_USE_USART4              FALSE  /* USARTD1. */
+#define AVR_SERIAL_USE_USART5              FALSE  /* USARTE0. */
+//TODO: Define the priority if the datasheet define this parameter.
+//#define AVR_UART_USART1_IRQ_PRIORITY      12
+//#define AVR_UART_USART2_IRQ_PRIORITY      12
+//#define AVR_UART_USART3_IRQ_PRIORITY      12
+//#define AVR_UART_USART4_IRQ_PRIORITY      12
+//#define AVR_UART_USART5_IRQ_PRIORITY      12
+
+/*
+ * UART driver system settings.
+ */
+#define AVR_UART_USE_USART1              FALSE  /* USARTC0. */
+#define AVR_UART_USE_USART2              FALSE  /* USARTC1. */
+#define AVR_UART_USE_USART3              FALSE  /* USARTD0. */
+#define AVR_UART_USE_USART4              FALSE  /* USARTD1. */
+#define AVR_UART_USE_USART5              FALSE  /* USARTE0. */
+// TODO: Definen the DMA stream like bellow
+//#define AVR_UART_USART1_RX_DMA_STREAM     AVR_DMA_STREAM_ID(2, 5)
+//#define AVR_UART_USART2_RX_DMA_STREAM     AVR_DMA_STREAM_ID(2, 5)
+//#define AVR_UART_USART3_RX_DMA_STREAM     AVR_DMA_STREAM_ID(2, 5)
+//#define AVR_UART_USART4_RX_DMA_STREAM     AVR_DMA_STREAM_ID(2, 5)
+//#define AVR_UART_USART5_RX_DMA_STREAM     AVR_DMA_STREAM_ID(2, 5)
+//TODO: Define the priority if the datasheet define this parameter.
+//#define AVR_UART_USART1_IRQ_PRIORITY      12
+//#define AVR_UART_USART2_IRQ_PRIORITY      12
+//#define AVR_UART_USART3_IRQ_PRIORITY      12
+//#define AVR_UART_USART4_IRQ_PRIORITY      12
+//#define AVR_UART_USART5_IRQ_PRIORITY      12
+
+
+/*
+ * I2C driver system settings.
+ */
+#define AVR_I2C_USE_I2C1                   FALSE
+
+/*
+ * SPI driver system settings.
+ */
+#define AVR_SPI_USE_SPI1                   FALSE
+#define AVR_SPI_USE_16BIT_POLLED_EXCHANGE  FALSE
+
+/*
+ * USB driver system settings.
+ */
+#define AVR_USB_USE_USB1                   FALSE
+#define AVR_USB_USE_NAMED_ADDRESS_SPACES   FALSE
+
+#endif /* MCUCONF_H */