diff options
Diffstat (limited to 'boards/EA_LPCXPRESSO_LPC1769/board.c')
| -rw-r--r-- | boards/EA_LPCXPRESSO_LPC1769/board.c | 103 |
1 files changed, 0 insertions, 103 deletions
diff --git a/boards/EA_LPCXPRESSO_LPC1769/board.c b/boards/EA_LPCXPRESSO_LPC1769/board.c deleted file mode 100644 index d32a96200..000000000 --- a/boards/EA_LPCXPRESSO_LPC1769/board.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -#if HAL_USE_PAL || defined(__DOXYGEN__) -const PALConfig pal_default_config = { - {VAL_GPIO0DATA, VAL_GPIO0DIR}, - {VAL_GPIO1DATA, VAL_GPIO1DIR}, - {VAL_GPIO2DATA, VAL_GPIO2DIR}, - {VAL_GPIO3DATA, VAL_GPIO3DIR}, - {VAL_GPIO4DATA, VAL_GPIO4DIR} -}; -#endif - -#if HAL_USE_MAC -/* - * Board Ethernet pins configuration. - * ENET_REF_CLK pin must be set before macInit(). - */ -static void board_eth_pin_config(void) { - - /* Ethernet pin config */ - LPC_PINCON->PINSEL2 |= (1UL << 30) | (1UL << 28) | (1UL << 20) | (1UL << 18) \ - | (1UL << 16) | (1UL << 8) | (1UL << 2) | (1UL << 0); /* Set Ethernet ENET_REF_CLK P1.15, ENET_RX_ER P1.14, - ENET_RXD1 P1.10, ENET_RXD0 P1.9, ENET_CRS P1.8, ENET_TX_EN P1.4, - ENET_TXD1 P1.1, ENET_TXD0 P1.0 pins. */ - LPC_PINCON->PINMODE2 |= (2UL << 30) | (2UL << 28) | (2UL << 20) | (2UL << 18) \ - | (2UL << 16) | (2UL << 8) | (2UL << 2) | (2UL << 0); /* Disable pull-up on ENET_REF_CLK P1.15, ENET_RX_ER P1.14, - ENET_RXD1 P1.10, ENET_RXD0 P1.9, ENET_CRS P1.8, ENET_TX_EN P1.4, - ENET_TXD1 P1.1, ENET_TXD0 P1.0 pins. */ - LPC_PINCON->PINSEL3 |= (1UL << 2) | (1UL << 0); /* Set ENET_MDIO P1.17, ENET_MDC P1.16 */ - LPC_PINCON->PINMODE3 |= (2UL << 2) | (2UL << 0); /* Disable pull-up on ENET_MDIO P1.17, ENET_MDC P1.16 */ - -} -#endif - -/* - * Early initialization code. - * This initialization must be performed just after stack setup and before - * any other initialization. - */ -void __early_init(void) { - - LPC17xx_clock_init(); -#if HAL_USE_MAC - board_eth_pin_config(); -#endif -} - -/* - * Board-specific initialization code. - */ -void boardInit(void) { - - /* - * Extra, board-specific, initializations. - */ - /* UART0 pin config */ - LPC_PINCON->PINSEL0 |= (1UL << 4) | (1UL << 6); /* Set UART0 TXD0 P0.2 and RXD0 P0.3 pins.*/ - LPC_PINCON->PINMODE0 |= (2UL << 4) | (2UL << 6); /* Disable pull-up on UART0 TXD0 and RXD0 pins.*/ - - /* CLKOUT pin config */ - /* LPC_PINCON->PINSEL3 |= (1UL << 22); */ /* Set CLKOUT P1.27 pin.*/ - /* LPC_PINCON->PINMODE3 |= (2UL << 22); */ /* Disable pull-up on CLKOUT pin. */ - - /* I2C1 pin config */ - LPC_PINCON->PINSEL1 |= (3UL << 8) | (3UL << 6); /* Set I2C1 SCL1 P0.20, SDA1 P0.19 pins. */ - LPC_PINCON->PINMODE1 |= (2UL << 8) | (2UL << 6); /* Disable pull-up on I2C1 SCL1 P0.20, SDA1 P0.19 pins. */ - LPC_PINCON->PINMODE_OD0 |= (1UL << 20) | (1UL << 19); /* Set I2C1 SCL1 P0.20, SDA1 P0.19 as open drain pins. */ - - /* DAC pin config */ - /* DAC pin set in dac_lld_start() */ - -#if HAL_USE_CAN - /* CAN config i/o */ - LPC_PINCON->PINSEL0 |= (1UL << 2) | (1UL << 0); /* Set CAN1 TD1 P0.1 and RD1 P0.0 pins. */ - LPC_PINCON->PINMODE0 |= (2UL << 2) | (2UL << 0); /* Disable pull-up on TD1 and RD1 pins.*/ - - LPC_PINCON->PINSEL0 |= (2UL << 10) | (2UL << 8); /* Set CAN2 TD2 P0.5 and RD2 P0.4 pins. */ - LPC_PINCON->PINMODE0 |= (2UL << 10) | (2UL << 8); /* Disable pull-up on TD1 and RD1 pins.*/ -#endif - -} |