1 files changed, 0 insertions, 80 deletions
diff --git a/boards/RENESAS_RPBRX62N/board.c b/boards/RENESAS_RPBRX62N/board.c
deleted file mode 100644
index df66b4d26..000000000
--- a/boards/RENESAS_RPBRX62N/board.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
-    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config = {
- {VAL_PORT0DATA, VAL_PORT0DIR, VAL_PORT0ICR, VAL_PORT0ODR, 0},
- {VAL_PORT1DATA, VAL_PORT1DIR, VAL_PORT1ICR, VAL_PORT1ODR, 0},
- {VAL_PORT2DATA, VAL_PORT2DIR, VAL_PORT2ICR, VAL_PORT2ODR, 0},
- {VAL_PORT3DATA, VAL_PORT3DIR, VAL_PORT3ICR, VAL_PORT3ODR, 0},
- {VAL_PORT4DATA, VAL_PORT4DIR, VAL_PORT4ICR, 0           , 0},
- {VAL_PORT5DATA, VAL_PORT5DIR, VAL_PORT5ICR, 0           , 0},
- {VAL_PORTADATA, VAL_PORTADIR, VAL_PORTAICR, 0           , VAL_PORTAPCR},
- {VAL_PORTBDATA, VAL_PORTBDIR, VAL_PORTBICR, 0           , VAL_PORTBPCR},
- {VAL_PORTCDATA, VAL_PORTCDIR, VAL_PORTCICR, VAL_PORTCODR, VAL_PORTCPCR},
- {VAL_PORTDDATA, VAL_PORTDDIR, VAL_PORTDICR, 0           , VAL_PORTDPCR},
- {VAL_PORTEDATA, VAL_PORTEDIR, VAL_PORTEICR, 0           , VAL_PORTEPCR},
-};
-#endif
-
-/**
- * @brief   CMT3 interrupt handler.
- */
-CH_IRQ_HANDLER(Excep_CMTU1_CMT3) {
-
-  CH_IRQ_PROLOGUE();
-
-  chSysLockFromIsr();
-  chSysTimerHandlerI();
-  chSysUnlockFromIsr();
-
-  CH_IRQ_EPILOGUE();
-}
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
-  rx62n_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
-  /* Setup tick timer */
-  MSTP(CMT3) = 0;             /* Enable CMT3 timer (cancel module stop state) */
-  CMT.CMSTR1.BIT.STR3 = 0;    /* Stop timer */
-  CMT3.CMCR.BIT.CKS = 2;      /* PCLK/128 */
-  CMT3.CMCNT = 0;
-  CMT3.CMCOR = RX62N_PERCLK / 128 / CH_FREQUENCY;
-  CMT3.CMCR.BIT.CMIE = 1;     /* Enable compare match interrupts */
-  IEN(CMT3,CMI3) = 1;         /* Set Interrupt Enable Register */
-  IPR(CMT3,CMI3) = 8;         /* Setup interrupt priority */
-  CMT.CMSTR1.BIT.STR3 = 1;    /* Start timer */
-}