diff options
Diffstat (limited to 'boards/ST_STM3220G_EVAL/board.h')
| -rw-r--r-- | boards/ST_STM3220G_EVAL/board.h | 226 |
1 files changed, 0 insertions, 226 deletions
diff --git a/boards/ST_STM3220G_EVAL/board.h b/boards/ST_STM3220G_EVAL/board.h deleted file mode 100644 index 07cfc5dea..000000000 --- a/boards/ST_STM3220G_EVAL/board.h +++ /dev/null @@ -1,226 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for STMicroelectronics STM3220G-EVAL board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_ST_STM3220G_EVAL
-#define BOARD_NAME "ST STM3220G-EVAL"
-
-/*
- * Board frequencies.
- * NOTE: The HSE crystal is not fitted by default on the board.
- */
-#define STM32_LSECLK 32768
-#define STM32_HSECLK 25000000
-
-/*
- * MCU type as defined in the ST header file stm32f2xx.h.
- */
-#define STM32F2XX
-
-/*
- * IO pins assignments.
- */
-
-#define GPIOA_WAKEUP_BUTTON 0
-
-#define GPIOB_ETHER_INT 14
-#define GPIOB_NAND_INT 15
-
-#define GPIOC_TAMPER_BUTTON 0
-#define GPIOC_LED4 7
-
-#define GPIOF_POT 9
-
-#define GPIOG_LED1 6
-#define GPIOG_LED2 8
-#define GPIOG_USER_BUTTON 15
-
-#define GPIOH_EXPANDER_INT 12
-#define GPIOH_SD_DETECT 13
-
-#define GPIOI_LED3 9
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n) (0 << ((n) * 2))
-#define PIN_MODE_OUTPUT(n) (1 << ((n) * 2))
-#define PIN_MODE_ALTERNATE(n) (2 << ((n) * 2))
-#define PIN_MODE_ANALOG(n) (3 << ((n) * 2))
-#define PIN_OTYPE_PUSHPULL(n) (0 << (n))
-#define PIN_OTYPE_OPENDRAIN(n) (1 << (n))
-#define PIN_OSPEED_2M(n) (0 << ((n) * 2))
-#define PIN_OSPEED_25M(n) (1 << ((n) * 2))
-#define PIN_OSPEED_50M(n) (2 << ((n) * 2))
-#define PIN_OSPEED_100M(n) (3 << ((n) * 2))
-#define PIN_PUDR_FLOATING(n) (0 << ((n) * 2))
-#define PIN_PUDR_PULLUP(n) (1 << ((n) * 2))
-#define PIN_PUDR_PULLDOWN(n) (2 << ((n) * 2))
-#define PIN_AFIO_AF(n, v) ((v##U) << ((n % 8) * 4))
-
-/*
- * Port A setup.
- * All input with pull-up except:
- * PA8 - MCO 1 (alternate 0).
- * PA13 - JTMS/SWDAT (alternate 0).
- * PA14 - JTCK/SWCLK (alternate 0).
- * PA15 - JTDI (alternate 0).
- */
-#define VAL_GPIOA_MODER (PIN_MODE_ALTERNATE(8) | \
- PIN_MODE_ALTERNATE(13) | \
- PIN_MODE_ALTERNATE(14) | \
- PIN_MODE_ALTERNATE(15))
-#define VAL_GPIOA_OTYPER 0x00000000
-#define VAL_GPIOA_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOA_PUPDR (PIN_PUDR_FLOATING(13) | \
- PIN_PUDR_FLOATING(14) | \
- PIN_PUDR_FLOATING(15))
-#define VAL_GPIOA_ODR 0xFFFFFFFF
-#define VAL_GPIOA_AFRL 0x00000000
-#define VAL_GPIOA_AFRH 0x00000000
-
-/*
- * Port B setup.
- * All input with pull-up except:
- * PB3 - JTDO (alternate 0).
- * PB4 - JNTRST (alternate 0).
- */
-#define VAL_GPIOB_MODER (PIN_MODE_ALTERNATE(3) | \
- PIN_MODE_ALTERNATE(4))
-#define VAL_GPIOB_OTYPER 0x00000000
-#define VAL_GPIOB_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOB_PUPDR (~(PIN_PUDR_FLOATING(3) | \
- PIN_PUDR_FLOATING(4)))
-#define VAL_GPIOB_ODR 0xFFFFFFFF
-#define VAL_GPIOB_AFRL 0x00000000
-#define VAL_GPIOB_AFRH 0x00000000
-
-/*
- * Port C setup.
- * All input with pull-up except:
- * PC9 - MCO2 (alternate 0).
- * PC10 - USART3_TX (alternate 7).
- * PC11 - USART3_RX (alternate 7).
- * PC14 - OSC32_INT (input floating).
- * PC15 - OSC32_OUT (input floating).
- */
-#define VAL_GPIOC_MODER (PIN_MODE_ALTERNATE(9) | \
- PIN_MODE_ALTERNATE(10) | \
- PIN_MODE_ALTERNATE(11))
-#define VAL_GPIOC_OTYPER 0x00000000
-#define VAL_GPIOC_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOC_PUPDR (~(PIN_PUDR_PULLUP(11) | \
- PIN_PUDR_FLOATING(14) | \
- PIN_PUDR_FLOATING(15)))
-#define VAL_GPIOC_ODR 0xFFFFFFFF
-#define VAL_GPIOC_AFRL 0x00000000
-#define VAL_GPIOC_AFRH (PIN_AFIO_AF(7, 10) | \
- PIN_AFIO_AF(7, 11))
-
-/*
- * Port D setup.
- * All input with pull-up.
- */
-#define VAL_GPIOD_MODER 0x00000000
-#define VAL_GPIOD_OTYPER 0x00000000
-#define VAL_GPIOD_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOD_PUPDR 0xFFFFFFFF
-#define VAL_GPIOD_ODR 0xFFFFFFFF
-#define VAL_GPIOD_AFRL 0x00000000
-#define VAL_GPIOD_AFRH 0x00000000
-
-/*
- * Port E setup.
- * All input with pull-up.
- */
-#define VAL_GPIOE_MODER 0x00000000
-#define VAL_GPIOE_OTYPER 0x00000000
-#define VAL_GPIOE_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOE_PUPDR 0xFFFFFFFF
-#define VAL_GPIOE_ODR 0xFFFFFFFF
-#define VAL_GPIOE_AFRL 0x00000000
-#define VAL_GPIOE_AFRH 0x00000000
-
-/*
- * Port F setup.
- * All input with pull-up.
- */
-#define VAL_GPIOF_MODER 0x00000000
-#define VAL_GPIOF_OTYPER 0x00000000
-#define VAL_GPIOF_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOF_PUPDR 0xFFFFFFFF
-#define VAL_GPIOF_ODR 0xFFFFFFFF
-#define VAL_GPIOF_AFRL 0x00000000
-#define VAL_GPIOF_AFRH 0x00000000
-
-/*
- * Port G setup.
- * All input with pull-up.
- */
-#define VAL_GPIOG_MODER (PIN_MODE_OUTPUT(GPIOG_LED1))
-#define VAL_GPIOG_OTYPER 0x00000000
-#define VAL_GPIOG_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOG_PUPDR (~(PIN_PUDR_FLOATING(GPIOG_LED1)))
-#define VAL_GPIOG_ODR 0xFFFFFFBF
-#define VAL_GPIOG_AFRL 0x00000000
-#define VAL_GPIOG_AFRH 0x00000000
-
-/*
- * Port H setup.
- * All input with pull-up.
- */
-#define VAL_GPIOH_MODER 0x00000000
-#define VAL_GPIOH_OTYPER 0x00000000
-#define VAL_GPIOH_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOH_PUPDR 0xFFFFFFFF
-#define VAL_GPIOH_ODR 0xFFFFFFFF
-#define VAL_GPIOH_AFRL 0x00000000
-#define VAL_GPIOH_AFRH 0x00000000
-
-/*
- * Port I setup.
- * All input with pull-up.
- */
-#define VAL_GPIOI_MODER 0x00000000
-#define VAL_GPIOI_OTYPER 0x00000000
-#define VAL_GPIOI_OSPEEDR 0xFFFFFFFF
-#define VAL_GPIOI_PUPDR 0xFFFFFFFF
-#define VAL_GPIOI_ODR 0xFFFFFFFF
-#define VAL_GPIOI_AFRL 0x00000000
-#define VAL_GPIOI_AFRH 0x00000000
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
|