1 files changed, 0 insertions, 112 deletions
diff --git a/demos/ARMCM3-LPC1343-OLIMEX/main.c b/demos/ARMCM3-LPC1343-OLIMEX/main.c
deleted file mode 100644
index 6cdaf6dcf..000000000
--- a/demos/ARMCM3-LPC1343-OLIMEX/main.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
-    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/*
- * LED blinker1 thread, times are in milliseconds.
- */
-static WORKING_AREA(waThread1, 128);
-static msg_t Thread1(void *arg) {
-
-  (void)arg;
-  chRegSetThreadName("blinker1");
-  while (TRUE) {
-    palClearPad(GPIO3, GPIO3_LED1);
-    chThdSleepMilliseconds(500);
-    palSetPad(GPIO3, GPIO3_LED1);
-    chThdSleepMilliseconds(500);
-  }
-}
-
-/*
- * LED blinker2 thread, times are in milliseconds.
- */
-static WORKING_AREA(waThread2, 128);
-static msg_t Thread2(void *arg) {
-
-  (void)arg;
-  chRegSetThreadName("blinker2");
-  while (TRUE) {
-    palClearPad(GPIO3, GPIO3_LED2);
-    chThdSleepMilliseconds(500);
-    palSetPad(GPIO3, GPIO3_LED2);
-    chThdSleepMilliseconds(480);
-  }
-}
-
-/*
- * LED scanlight thread, times are in milliseconds.
- */
-static WORKING_AREA(waThread3, 128);
-static msg_t Thread3(void *arg) {
-
-  (void)arg;
-  chRegSetThreadName("scanner1");
-  palSetPort(GPIO2, PAL_PORT_BIT(GPIO2_LED5) |
-                    PAL_PORT_BIT(GPIO2_LED6) |
-                    PAL_PORT_BIT(GPIO2_LED7) |
-                    PAL_PORT_BIT(GPIO2_LED8));
-  while (TRUE) {
-    palClearPort( GPIO2, PAL_PORT_BIT(GPIO2_LED5));
-    chThdSleepMilliseconds(50);
-    palSetPort(   GPIO2, PAL_PORT_BIT(GPIO2_LED8));
-    chThdSleepMilliseconds(150);
-    palClearPort( GPIO2, PAL_PORT_BIT(GPIO2_LED6));
-    chThdSleepMilliseconds(50);
-    palSetPort(   GPIO2, PAL_PORT_BIT(GPIO2_LED5));
-    chThdSleepMilliseconds(150);
-    palClearPort( GPIO2, PAL_PORT_BIT(GPIO2_LED7));
-    chThdSleepMilliseconds(50);
-    palSetPort(   GPIO2, PAL_PORT_BIT(GPIO2_LED6));
-    chThdSleepMilliseconds(150);
-    palClearPort( GPIO2, PAL_PORT_BIT(GPIO2_LED8));
-    chThdSleepMilliseconds(50);
-    palSetPort(   GPIO2, PAL_PORT_BIT(GPIO2_LED7));
-    chThdSleepMilliseconds(150);
-  }
-}
-
-/*
- * Application entry point.
- */
-int main(void) {
-
-  /*
-   * System initializations.
-   * - HAL initialization, this also initializes the configured device drivers
-   *   and performs the board-specific initializations.
-   * - Kernel initialization, the main() function becomes a thread and the
-   *   RTOS is active.
-   */
-  halInit();
-  chSysInit();
-
-  /*
-   * Creates the LED threads.
-   */
-  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
-  chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO, Thread2, NULL);
-  chThdCreateStatic(waThread3, sizeof(waThread3), NORMALPRIO, Thread3, NULL);
-
-  /*
-   * Normal main() thread activity, in this demo it does nothing.
-   */
-  while (TRUE) {
-    chThdSleepMilliseconds(500);
-  }
-}