diff options
Diffstat (limited to 'demos/ARMCM3-LPC1769-LPCXPRESSO-LWIP/mcuconf.h')
| -rw-r--r-- | demos/ARMCM3-LPC1769-LPCXPRESSO-LWIP/mcuconf.h | 110 |
1 files changed, 0 insertions, 110 deletions
diff --git a/demos/ARMCM3-LPC1769-LPCXPRESSO-LWIP/mcuconf.h b/demos/ARMCM3-LPC1769-LPCXPRESSO-LWIP/mcuconf.h deleted file mode 100644 index 68e085a59..000000000 --- a/demos/ARMCM3-LPC1769-LPCXPRESSO-LWIP/mcuconf.h +++ /dev/null @@ -1,110 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * LPC17xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the driver - * is enabled in halconf.h. - * - * IRQ priorities: - * 7...0 Lowest...highest. - */ - -/* - * HAL driver system settings. - */ -#define LPC17xx_MAINOSC_ENABLE TRUE -#define LPC17xx_SYSCLK_SELECT CLKSRCSEL_MAINOSC -#define LPC17xx_MAINPLL_ENABLE TRUE -#define LPC17xx_MAINPLL_MUL 30 -#define LPC17xx_MAINPLL_PREDIV 1 -#define LPC17xx_USBPLL_ENABLE FALSE -#define LPC17xx_USBPLL_MUL 4 -#define LPC17xx_USBPLL_DIV 4 -#define LPC17xx_CCLK_DIV 3 -#define LPC17xx_PCLK_SELECT PCLKSEL_CCLK -#define LPC17xx_CLKOUT_ENABLE FALSE -#define LPC17xx_CLKOUT_DIV 4 -#define LPC17xx_CLKOUT_SELECT CLKOUTSEL_CCLK - -/* - * GPT driver system settings. - */ -#define LPC17xx_GPT_USE_TIM0 TRUE -#define LPC17xx_GPT_USE_TIM1 TRUE -#define LPC17xx_GPT_USE_TIM2 TRUE -#define LPC17xx_GPT_USE_TIM3 TRUE -#define LPC17xx_GPT_TIM0_IRQ_PRIORITY 2 -#define LPC17xx_GPT_TIM1_IRQ_PRIORITY 6 -#define LPC17xx_GPT_TIM2_IRQ_PRIORITY 2 -#define LPC17xx_GPT_TIM3_IRQ_PRIORITY 2 - -/* - * SERIAL driver system settings. - */ -#define LPC17xx_SERIAL_USE_UART0 TRUE -#define LPC17xx_SERIAL_USE_UART1 FALSE -#define LPC17xx_SERIAL_USE_UART2 FALSE -#define LPC17xx_SERIAL_USE_UART3 FALSE -#define LPC17xx_SERIAL_FIFO_PRELOAD 16 -#define LPC17xx_SERIAL_UART0_IRQ_PRIORITY 3 -#define LPC17xx_SERIAL_UART1_IRQ_PRIORITY 3 -#define LPC17xx_SERIAL_UART2_IRQ_PRIORITY 3 -#define LPC17xx_SERIAL_UART3_IRQ_PRIORITY 3 - -/* - * I2C driver system settings. - */ -#define LPC17xx_I2C_USE_I2C0 FALSE -#define LPC17xx_I2C_USE_I2C1 FALSE -#define LPC17xx_I2C_USE_I2C2 FALSE -#define LPC17xx_I2C_I2C0_IRQ_PRIORITY 3 -#define LPC17xx_I2C_I2C1_IRQ_PRIORITY 3 -#define LPC17xx_I2C_I2C2_IRQ_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define LPC17xx_SPI_USE_SSP0 TRUE -#define LPC17xx_SPI_USE_SSP1 FALSE -#define LPC17xx_SPI_SSP0CLKDIV 1 -#define LPC17xx_SPI_SSP1CLKDIV 1 -#define LPC17xx_SPI_SSP0_IRQ_PRIORITY 5 -#define LPC17xx_SPI_SSP1_IRQ_PRIORITY 5 - -/* - * RTC driver system settings. - */ -#define LPC17xx_RTC_IS_CALENDAR TRUE -#define LPC17xx_RTC_USE_ALARM TRUE -#define LPC17xx_RTC_IRQ_PRIORITY 3 - -/* - * DAC driver system settings. - */ -#define LPC17xx_DAC_DMA_CHANNEL DMA_CHANNEL5 - -/* - * MAC driver system settings. - */ -#define LPC17xx_MAC_TRANSMIT_BUFFERS 2 -#define LPC17xx_MAC_RECEIVE_BUFFERS 4 -#define LPC17xx_MAC_BUFFERS_SIZE 1522 -#define LPC17xx_MAC_PHY_TIMEOUT 100 -#define LPC17xx_MAC_ETH_IRQ_PRIORITY 13 -#define LPC17xx_MAC_RESET_DELAY 100 |