1 files changed, 0 insertions, 23 deletions
diff --git a/demos/AVR-Arduino-GCC/readme.txt b/demos/AVR-Arduino-GCC/readme.txt
deleted file mode 100644
index 124b6aa92..000000000
--- a/demos/AVR-Arduino-GCC/readme.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-*****************************************************************************
-** ChibiOS/RT demo for Atmel AVR ATmega328.                                **
-*****************************************************************************
-
-** TARGET **
-
-The demo runs on an Arduino board with an ATmega328 MCU in it, eg. the Arduino 
-Uno or Duemilanove.
-
-** The Demo **
-
-The demo prints the "Hello world" on Serial0, which is available on the board
-USB connector, and toggles the LED on PB5 (pin 13 on Arduino IDE) every second.
-
-** Build Procedure **
-
-The demo was built using the GCC AVR toolchain. It should build with WinAVR too!
-
-** Notes **
-
-This demo can be programmed onto the Arduino while leaving the Arduino bootloader
-in place. This means that the programming can be done through the USB connector
-as well.