diff options
Diffstat (limited to 'demos/STM32/RT-STM32F446ZE-NUCLEO144')
| -rw-r--r-- | demos/STM32/RT-STM32F446ZE-NUCLEO144/Makefile | 133 | ||||
| -rw-r--r-- | demos/STM32/RT-STM32F446ZE-NUCLEO144/cfg/chconf.h (renamed from demos/STM32/RT-STM32F446ZE-NUCLEO144/chconf.h) | 130 | ||||
| -rw-r--r-- | demos/STM32/RT-STM32F446ZE-NUCLEO144/cfg/halconf.h (renamed from demos/STM32/RT-STM32F446ZE-NUCLEO144/halconf.h) | 218 | ||||
| -rw-r--r-- | demos/STM32/RT-STM32F446ZE-NUCLEO144/cfg/mcuconf.h (renamed from demos/STM32/RT-STM32F446ZE-NUCLEO144/mcuconf.h) | 5 | ||||
| -rw-r--r-- | demos/STM32/RT-STM32F446ZE-NUCLEO144/debug/RT-STM32F446ZE-NUCLEO144 (OpenOCD, Flash and Run).launch | 104 | ||||
| -rw-r--r-- | demos/STM32/RT-STM32F446ZE-NUCLEO144/main.c | 6 |
6 files changed, 398 insertions, 198 deletions
diff --git a/demos/STM32/RT-STM32F446ZE-NUCLEO144/Makefile b/demos/STM32/RT-STM32F446ZE-NUCLEO144/Makefile index d8abba1f5..d1c3e332b 100644 --- a/demos/STM32/RT-STM32F446ZE-NUCLEO144/Makefile +++ b/demos/STM32/RT-STM32F446ZE-NUCLEO144/Makefile @@ -18,7 +18,7 @@ ifeq ($(USE_CPPOPT),) USE_CPPOPT = -fno-rtti
endif
-# Enable this if you want the linker to remove unused code and data
+# Enable this if you want the linker to remove unused code and data.
ifeq ($(USE_LINK_GC),)
USE_LINK_GC = yes
endif
@@ -28,16 +28,11 @@ ifeq ($(USE_LDOPT),) USE_LDOPT =
endif
-# Enable this if you want link time optimizations (LTO)
+# Enable this if you want link time optimizations (LTO).
ifeq ($(USE_LTO),)
USE_LTO = yes
endif
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
- USE_THUMB = yes
-endif
-
# Enable this if you want to see the full log while compiling.
ifeq ($(USE_VERBOSE_COMPILE),)
USE_VERBOSE_COMPILE = no
@@ -74,19 +69,33 @@ ifeq ($(USE_FPU),) USE_FPU = no
endif
+# FPU-related options.
+ifeq ($(USE_FPU_OPT),)
+ USE_FPU_OPT = -mfloat-abi=$(USE_FPU) -mfpu=fpv4-sp-d16
+endif
+
#
# Architecture or project specific options
##############################################################################
##############################################################################
-# Project, sources and paths
+# Project, target, sources and paths
#
# Define project name here
PROJECT = ch
-# Imported source files and paths
-CHIBIOS = ../../..
+# Target settings.
+MCU = cortex-m4
+
+# Imported source files and paths.
+CHIBIOS := ../../..
+CONFDIR := ./cfg
+BUILDDIR := ./build
+DEPDIR := ./.dep
+
+# Licensing files.
+include $(CHIBIOS)/os/license/license.mk
# Startup files.
include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk
# HAL-OSAL files (optional).
@@ -97,100 +106,43 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk # RTOS files (optional).
include $(CHIBIOS)/os/rt/rt.mk
include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Auto-build files in ./source recursively.
+include $(CHIBIOS)/tools/mk/autobuild.mk
# Other files (optional).
include $(CHIBIOS)/test/lib/test.mk
include $(CHIBIOS)/test/rt/rt_test.mk
include $(CHIBIOS)/test/oslib/oslib_test.mk
-include $(CHIBIOS)/os/hal/lib/streams/streams.mk
# Define linker script file here
LDSCRIPT= $(STARTUPLD)/STM32F446xE.ld
# C sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
+CSRC = $(ALLCSRC) \
$(TESTSRC) \
main.c
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CPPSRC =
-
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACSRC =
+CPPSRC = $(ALLCPPSRC)
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
-
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC)
-
-#
-# Project, sources and paths
-##############################################################################
+# List ASM source files here.
+ASMSRC = $(ALLASMSRC)
-##############################################################################
-# Compiler settings
-#
+# List ASM with preprocessor source files here.
+ASMXSRC = $(ALLXASMSRC)
-MCU = cortex-m4
+# Inclusion directories.
+INCDIR = $(CONFDIR) $(ALLINC) $(TESTINC)
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-# runtime support makes code size explode.
-LD = $(TRGT)gcc
-#LD = $(TRGT)g++
-CP = $(TRGT)objcopy
-AS = $(TRGT)gcc -x assembler-with-cpp
-AR = $(TRGT)ar
-OD = $(TRGT)objdump
-SZ = $(TRGT)size
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
+# Define C warning options here.
CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
-# Define C++ warning options here
+# Define C++ warning options here.
CPPWARN = -Wall -Wextra -Wundef
#
-# Compiler settings
+# Project, target, sources and paths
##############################################################################
##############################################################################
@@ -213,8 +165,25 @@ ULIBDIR = ULIBS =
#
-# End of user defines
+# End of user section
+##############################################################################
+
##############################################################################
+# Common rules
+#
-RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC
+RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk
+include $(RULESPATH)/arm-none-eabi.mk
include $(RULESPATH)/rules.mk
+
+#
+# Common rules
+##############################################################################
+
+##############################################################################
+# Custom rules
+#
+
+#
+# Custom rules
+##############################################################################
diff --git a/demos/STM32/RT-STM32F446ZE-NUCLEO144/chconf.h b/demos/STM32/RT-STM32F446ZE-NUCLEO144/cfg/chconf.h index 20ef40a11..e50f15cce 100644 --- a/demos/STM32/RT-STM32F446ZE-NUCLEO144/chconf.h +++ b/demos/STM32/RT-STM32F446ZE-NUCLEO144/cfg/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,7 +15,7 @@ */
/**
- * @file templates/chconf.h
+ * @file rt/templates/chconf.h
* @brief Configuration file template.
* @details A copy of this file must be placed in each project directory, it
* contains the application specific kernel settings.
@@ -29,7 +29,7 @@ #define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_6_0_
/*===========================================================================*/
/**
@@ -42,26 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 32
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 10000
+#endif
/**
* @brief Time intervals data size.
* @note Allowed values are 16, 32 or 64 bits.
*/
+#if !defined(CH_CFG_INTERVALS_SIZE)
#define CH_CFG_INTERVALS_SIZE 32
+#endif
/**
* @brief Time types data size.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -71,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 2
+#endif
/** @} */
@@ -94,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
+#if !defined(CH_CFG_TIME_QUANTUM)
#define CH_CFG_TIME_QUANTUM 0
+#endif
/**
* @brief Managed RAM size.
@@ -107,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -116,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -135,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -153,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM TRUE
+#endif
/**
* @brief Threads registry APIs.
@@ -161,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -170,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -178,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -189,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -197,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -207,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -217,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -227,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -235,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -245,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -254,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -265,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -275,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -284,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -296,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -305,16 +355,31 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
/**
- * @brief Objects FIFOs APIs.
+ * @brief Objects FIFOs APIs.
* @details If enabled then the objects FIFOs APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
+
+/**
+ * @brief Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -325,7 +390,9 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
/** @} */
@@ -343,39 +410,60 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_CFG_USE_FACTORY)
#define CH_CFG_USE_FACTORY TRUE
+#endif
/**
* @brief Maximum length for object names.
* @details If the specified length is zero then the name is stored by
* pointer but this could have unintended side effects.
*/
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
/**
* @brief Enables the registry of generic objects.
*/
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
/**
* @brief Enables factory for generic buffers.
*/
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
/**
* @brief Enables factory for semaphores.
*/
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
/**
* @brief Enables factory for mailboxes.
*/
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
/**
* @brief Enables factory for objects FIFOs.
*/
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
+
+/**
+ * @brief Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES TRUE
+#endif
/** @} */
@@ -391,7 +479,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -400,7 +490,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -409,7 +501,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_CHECKS)
#define CH_DBG_ENABLE_CHECKS FALSE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -419,7 +513,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_ASSERTS)
#define CH_DBG_ENABLE_ASSERTS FALSE
+#endif
/**
* @brief Debug option, trace buffer.
@@ -427,14 +523,18 @@ *
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
+#if !defined(CH_DBG_TRACE_MASK)
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+#endif
/**
* @brief Trace buffer entries.
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
* different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -446,7 +546,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -456,7 +558,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_FILL_THREADS)
#define CH_DBG_FILL_THREADS FALSE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -467,7 +571,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -479,6 +585,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
diff --git a/demos/STM32/RT-STM32F446ZE-NUCLEO144/halconf.h b/demos/STM32/RT-STM32F446ZE-NUCLEO144/cfg/halconf.h index d7793e22c..984177a9e 100644 --- a/demos/STM32/RT-STM32F446ZE-NUCLEO144/halconf.h +++ b/demos/STM32/RT-STM32F446ZE-NUCLEO144/cfg/halconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -28,160 +28,190 @@ #ifndef HALCONF_H
#define HALCONF_H
+#define _CHIBIOS_HAL_CONF_
+#define _CHIBIOS_HAL_CONF_VER_7_0_
+
#include "mcuconf.h"
/**
* @brief Enables the PAL subsystem.
*/
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
+#define HAL_USE_PAL TRUE
#endif
/**
* @brief Enables the ADC subsystem.
*/
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
+#define HAL_USE_ADC FALSE
#endif
/**
* @brief Enables the CAN subsystem.
*/
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
+#define HAL_USE_CAN FALSE
#endif
/**
* @brief Enables the cryptographic subsystem.
*/
#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
-#define HAL_USE_CRY FALSE
+#define HAL_USE_CRY FALSE
#endif
/**
* @brief Enables the DAC subsystem.
*/
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
+#define HAL_USE_DAC FALSE
#endif
/**
* @brief Enables the GPT subsystem.
*/
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
+#define HAL_USE_GPT FALSE
#endif
/**
* @brief Enables the I2C subsystem.
*/
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
+#define HAL_USE_I2C FALSE
#endif
/**
* @brief Enables the I2S subsystem.
*/
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
+#define HAL_USE_I2S FALSE
#endif
/**
* @brief Enables the ICU subsystem.
*/
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
+#define HAL_USE_ICU FALSE
#endif
/**
* @brief Enables the MAC subsystem.
*/
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
+#define HAL_USE_MAC FALSE
#endif
/**
* @brief Enables the MMC_SPI subsystem.
*/
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
+#define HAL_USE_MMC_SPI FALSE
#endif
/**
* @brief Enables the PWM subsystem.
*/
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the QSPI subsystem.
- */
-#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
-#define HAL_USE_QSPI FALSE
+#define HAL_USE_PWM FALSE
#endif
/**
* @brief Enables the RTC subsystem.
*/
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
+#define HAL_USE_RTC FALSE
#endif
/**
* @brief Enables the SDC subsystem.
*/
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
+#define HAL_USE_SDC FALSE
#endif
/**
* @brief Enables the SERIAL subsystem.
*/
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL TRUE
+#define HAL_USE_SERIAL TRUE
#endif
/**
* @brief Enables the SERIAL over USB subsystem.
*/
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SIO subsystem.
+ */
+#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
+#define HAL_USE_SIO FALSE
#endif
/**
* @brief Enables the SPI subsystem.
*/
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the TRNG subsystem.
+ */
+#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
+#define HAL_USE_TRNG FALSE
#endif
/**
* @brief Enables the UART subsystem.
*/
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
+#define HAL_USE_UART FALSE
#endif
/**
* @brief Enables the USB subsystem.
*/
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
+#define HAL_USE_USB FALSE
#endif
/**
* @brief Enables the WDG subsystem.
*/
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
+#define HAL_USE_WDG FALSE
+#endif
+
+/**
+ * @brief Enables the WSPI subsystem.
+ */
+#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
+#define HAL_USE_WSPI FALSE
+#endif
+
+/*===========================================================================*/
+/* PAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define PAL_USE_CALLBACKS FALSE
+#endif
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
+#define PAL_USE_WAIT FALSE
#endif
/*===========================================================================*/
@@ -193,7 +223,7 @@ * @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
+#define ADC_USE_WAIT TRUE
#endif
/**
@@ -201,7 +231,7 @@ * @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
@@ -212,7 +242,14 @@ * @brief Sleep mode related APIs inclusion switch.
*/
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/**
+ * @brief Enforces the driver to use direct callbacks rather than OSAL events.
+ */
+#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define CAN_ENFORCE_USE_CALLBACKS FALSE
#endif
/*===========================================================================*/
@@ -238,6 +275,26 @@ #endif
/*===========================================================================*/
+/* DAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
+#define DAC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define DAC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
/* I2C driver related settings. */
/*===========================================================================*/
@@ -245,7 +302,7 @@ * @brief Enables the mutual exclusion APIs on the I2C bus.
*/
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
@@ -253,17 +310,17 @@ /*===========================================================================*/
/**
- * @brief Enables an event sources for incoming packets.
+ * @brief Enables the zero-copy API.
*/
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
+#define MAC_USE_ZERO_COPY FALSE
#endif
/**
* @brief Enables an event sources for incoming packets.
*/
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
+#define MAC_USE_EVENTS TRUE
#endif
/*===========================================================================*/
@@ -279,7 +336,7 @@ * use a DMA channel and heavily loads the CPU.
*/
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
+#define MMC_NICE_WAITING TRUE
#endif
/*===========================================================================*/
@@ -291,7 +348,7 @@ * @note Attempts are performed at 10mS intervals.
*/
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
+#define SDC_INIT_RETRY 100
#endif
/**
@@ -300,7 +357,7 @@ * at @p FALSE.
*/
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
+#define SDC_MMC_SUPPORT FALSE
#endif
/**
@@ -310,7 +367,21 @@ * lower priority, this may slow down the driver a bit however.
*/
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/**
+ * @brief OCR initialization constant for V20 cards.
+ */
+#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR_V20 0x50FF8000U
+#endif
+
+/**
+ * @brief OCR initialization constant for non-V20 cards.
+ */
+#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR 0x80100000U
#endif
/*===========================================================================*/
@@ -323,7 +394,7 @@ * default configuration.
*/
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
+#define SERIAL_DEFAULT_BITRATE 38400
#endif
/**
@@ -334,7 +405,7 @@ * buffers.
*/
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
+#define SERIAL_BUFFERS_SIZE 16
#endif
/*===========================================================================*/
@@ -349,7 +420,7 @@ * buffers.
*/
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
+#define SERIAL_USB_BUFFERS_SIZE 256
#endif
/**
@@ -357,7 +428,7 @@ * @note The default is 2 buffers.
*/
#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER 2
+#define SERIAL_USB_BUFFERS_NUMBER 2
#endif
/*===========================================================================*/
@@ -369,15 +440,32 @@ * @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables circular transfers APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
+#define SPI_USE_CIRCULAR FALSE
#endif
+
/**
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/**
+ * @brief Handling method for SPI CS line.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
+#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
#endif
/*===========================================================================*/
@@ -389,7 +477,7 @@ * @note Disabling this option saves both code and data space.
*/
#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT FALSE
+#define UART_USE_WAIT FALSE
#endif
/**
@@ -397,7 +485,7 @@ * @note Disabling this option saves both code and data space.
*/
#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION FALSE
+#define UART_USE_MUTUAL_EXCLUSION FALSE
#endif
/*===========================================================================*/
@@ -409,7 +497,27 @@ * @note Disabling this option saves both code and data space.
*/
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT FALSE
+#define USB_USE_WAIT FALSE
+#endif
+
+/*===========================================================================*/
+/* WSPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
+#define WSPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define WSPI_USE_MUTUAL_EXCLUSION TRUE
#endif
#endif /* HALCONF_H */
diff --git a/demos/STM32/RT-STM32F446ZE-NUCLEO144/mcuconf.h b/demos/STM32/RT-STM32F446ZE-NUCLEO144/cfg/mcuconf.h index c043f746c..d5b17b3aa 100644 --- a/demos/STM32/RT-STM32F446ZE-NUCLEO144/mcuconf.h +++ b/demos/STM32/RT-STM32F446ZE-NUCLEO144/cfg/mcuconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -69,7 +69,8 @@ #define STM32_I2SSRC STM32_I2SSRC_PLLI2S
#define STM32_SAI1SEL STM32_SAI2SEL_PLLR
#define STM32_SAI2SEL STM32_SAI2SEL_PLLR
-#define STM32_CK48MSEL STM32_CK48MSEL_PLLSAI
+#define STM32_TIMPRE STM32_TIMPRE_PCLK
+#define STM32_CK48MSEL STM32_CK48MSEL_PLLALT
#define STM32_PVD_ENABLE FALSE
#define STM32_PLS STM32_PLS_LEV0
#define STM32_BKPRAM_ENABLE FALSE
diff --git a/demos/STM32/RT-STM32F446ZE-NUCLEO144/debug/RT-STM32F446ZE-NUCLEO144 (OpenOCD, Flash and Run).launch b/demos/STM32/RT-STM32F446ZE-NUCLEO144/debug/RT-STM32F446ZE-NUCLEO144 (OpenOCD, Flash and Run).launch index 004be7955..89c8e86d3 100644 --- a/demos/STM32/RT-STM32F446ZE-NUCLEO144/debug/RT-STM32F446ZE-NUCLEO144 (OpenOCD, Flash and Run).launch +++ b/demos/STM32/RT-STM32F446ZE-NUCLEO144/debug/RT-STM32F446ZE-NUCLEO144 (OpenOCD, Flash and Run).launch @@ -1,52 +1,52 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
-<stringAttribute key="bad_container_name" value="\RT-STM32F446ZE-NUCLEO144\debug"/>
-<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20 monitor reset init monitor sleep 50 "/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
-<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
-<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
-<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
-<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
-<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
-<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
-<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
-<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
-<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
-<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?><contentList/>"/>
-<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <globalVariableList/> "/>
-<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <memoryBlockExpressionList/> "/>
-<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
-<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F446ZE-NUCLEO144"/>
-<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
-<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
-<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
-<listEntry value="/RT-STM32F446ZE-NUCLEO144"/>
-</listAttribute>
-<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
-<listEntry value="4"/>
-</listAttribute>
-<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
-<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
-</listAttribute>
-</launchConfiguration>
+<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType"> +<stringAttribute key="bad_container_name" value="\RT-STM32F446ZE-NUCLEO144\debug"/> +<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20 monitor reset init monitor sleep 50 "/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/> +<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/> +<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/> +<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/> +<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/> +<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/> +<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/> +<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/> +<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/> +<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/> +<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?><contentList><content id="r2-(format)" val="4"/></contentList>"/> +<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <globalVariableList/> "/> +<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <memoryBlockExpressionList/> "/> +<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/> +<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F446ZE-NUCLEO144"/> +<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/> +<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/> +<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS"> +<listEntry value="/RT-STM32F446ZE-NUCLEO144"/> +</listAttribute> +<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES"> +<listEntry value="4"/> +</listAttribute> +<listAttribute key="org.eclipse.debug.ui.favoriteGroups"> +<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/> +</listAttribute> +</launchConfiguration> diff --git a/demos/STM32/RT-STM32F446ZE-NUCLEO144/main.c b/demos/STM32/RT-STM32F446ZE-NUCLEO144/main.c index 8cfc7fc38..bc6222035 100644 --- a/demos/STM32/RT-STM32F446ZE-NUCLEO144/main.c +++ b/demos/STM32/RT-STM32F446ZE-NUCLEO144/main.c @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -34,13 +34,13 @@ static THD_FUNCTION(Thread1, arg) { palSetLine(LINE_LED2);
chThdSleepMilliseconds(50);
palSetLine(LINE_LED3);
- chThdSleepMilliseconds(200);
+ chThdSleepMilliseconds(150);
palClearLine(LINE_LED1);
chThdSleepMilliseconds(50);
palClearLine(LINE_LED2);
chThdSleepMilliseconds(50);
palClearLine(LINE_LED3);
- chThdSleepMilliseconds(200);
+ chThdSleepMilliseconds(150);
}
}
|