diff options
Diffstat (limited to 'demos/STM32/RT-STM32L053-DISCOVERY')
| -rw-r--r-- | demos/STM32/RT-STM32L053-DISCOVERY/Makefile | 135 | ||||
| -rw-r--r-- | demos/STM32/RT-STM32L053-DISCOVERY/cfg/chconf.h (renamed from demos/STM32/RT-STM32L053-DISCOVERY/chconf.h) | 130 | ||||
| -rw-r--r-- | demos/STM32/RT-STM32L053-DISCOVERY/cfg/halconf.h (renamed from demos/STM32/RT-STM32L053-DISCOVERY/halconf.h) | 218 | ||||
| -rw-r--r-- | demos/STM32/RT-STM32L053-DISCOVERY/cfg/mcuconf.h (renamed from demos/STM32/RT-STM32L053-DISCOVERY/mcuconf.h) | 2 | ||||
| -rw-r--r-- | demos/STM32/RT-STM32L053-DISCOVERY/main.c | 2 | ||||
| -rw-r--r-- | demos/STM32/RT-STM32L053-DISCOVERY/usbcfg.c | 342 | ||||
| -rw-r--r-- | demos/STM32/RT-STM32L053-DISCOVERY/usbcfg.h | 26 |
7 files changed, 343 insertions, 512 deletions
diff --git a/demos/STM32/RT-STM32L053-DISCOVERY/Makefile b/demos/STM32/RT-STM32L053-DISCOVERY/Makefile index 566bac1b2..c7f4fd997 100644 --- a/demos/STM32/RT-STM32L053-DISCOVERY/Makefile +++ b/demos/STM32/RT-STM32L053-DISCOVERY/Makefile @@ -5,7 +5,7 @@ # Compiler options here.
ifeq ($(USE_OPT),)
- USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16
+ USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
endif
# C specific options here (added to USE_OPT).
@@ -18,7 +18,7 @@ ifeq ($(USE_CPPOPT),) USE_CPPOPT = -fno-rtti
endif
-# Enable this if you want the linker to remove unused code and data
+# Enable this if you want the linker to remove unused code and data.
ifeq ($(USE_LINK_GC),)
USE_LINK_GC = yes
endif
@@ -28,16 +28,11 @@ ifeq ($(USE_LDOPT),) USE_LDOPT =
endif
-# Enable this if you want link time optimizations (LTO)
+# Enable this if you want link time optimizations (LTO).
ifeq ($(USE_LTO),)
USE_LTO = yes
endif
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
- USE_THUMB = yes
-endif
-
# Enable this if you want to see the full log while compiling.
ifeq ($(USE_VERBOSE_COMPILE),)
USE_VERBOSE_COMPILE = no
@@ -74,19 +69,33 @@ ifeq ($(USE_FPU),) USE_FPU = no
endif
+# FPU-related options.
+ifeq ($(USE_FPU_OPT),)
+ USE_FPU_OPT = -mfloat-abi=$(USE_FPU) -mfpu=fpv4-sp-d16
+endif
+
#
# Architecture or project specific options
##############################################################################
##############################################################################
-# Project, sources and paths
+# Project, target, sources and paths
#
# Define project name here
PROJECT = ch
-# Imported source files and paths
-CHIBIOS = ../../..
+# Target settings.
+MCU = cortex-m0
+
+# Imported source files and paths.
+CHIBIOS := ../../..
+CONFDIR := ./cfg
+BUILDDIR := ./build
+DEPDIR := ./.dep
+
+# Licensing files.
+include $(CHIBIOS)/os/license/license.mk
# Startup files.
include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32l0xx.mk
# HAL-OSAL files (optional).
@@ -97,6 +106,8 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk # RTOS files (optional).
include $(CHIBIOS)/os/rt/rt.mk
include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
+# Auto-build files in ./source recursively.
+include $(CHIBIOS)/tools/mk/autobuild.mk
# Other files (optional).
include $(CHIBIOS)/test/lib/test.mk
include $(CHIBIOS)/test/rt/rt_test.mk
@@ -107,90 +118,31 @@ LDSCRIPT= $(STARTUPLD)/STM32L053x8.ld # C sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
+CSRC = $(ALLCSRC) \
$(TESTSRC) \
main.c
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
-CPPSRC =
-
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACSRC =
+CPPSRC = $(ALLCPPSRC)
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
-
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
- $(CHIBIOS)/os/various
-
-#
-# Project, sources and paths
-##############################################################################
+# List ASM source files here.
+ASMSRC = $(ALLASMSRC)
-##############################################################################
-# Compiler settings
-#
+# List ASM with preprocessor source files here.
+ASMXSRC = $(ALLXASMSRC)
-MCU = cortex-m0
+# Inclusion directories.
+INCDIR = $(CONFDIR) $(ALLINC) $(TESTINC)
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-# runtime support makes code size explode.
-LD = $(TRGT)gcc
-#LD = $(TRGT)g++
-CP = $(TRGT)objcopy
-AS = $(TRGT)gcc -x assembler-with-cpp
-AR = $(TRGT)ar
-OD = $(TRGT)objdump
-SZ = $(TRGT)size
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
+# Define C warning options here.
CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
-# Define C++ warning options here
+# Define C++ warning options here.
CPPWARN = -Wall -Wextra -Wundef
#
-# Compiler settings
+# Project, target, sources and paths
##############################################################################
##############################################################################
@@ -213,8 +165,25 @@ ULIBDIR = ULIBS =
#
-# End of user defines
+# End of user section
+##############################################################################
+
##############################################################################
+# Common rules
+#
-RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC
+RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk
+include $(RULESPATH)/arm-none-eabi.mk
include $(RULESPATH)/rules.mk
+
+#
+# Common rules
+##############################################################################
+
+##############################################################################
+# Custom rules
+#
+
+#
+# Custom rules
+##############################################################################
diff --git a/demos/STM32/RT-STM32L053-DISCOVERY/chconf.h b/demos/STM32/RT-STM32L053-DISCOVERY/cfg/chconf.h index 23154e6cd..41e58ce96 100644 --- a/demos/STM32/RT-STM32L053-DISCOVERY/chconf.h +++ b/demos/STM32/RT-STM32L053-DISCOVERY/cfg/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,7 +15,7 @@ */
/**
- * @file templates/chconf.h
+ * @file rt/templates/chconf.h
* @brief Configuration file template.
* @details A copy of this file must be placed in each project directory, it
* contains the application specific kernel settings.
@@ -29,7 +29,7 @@ #define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
+#define _CHIBIOS_RT_CONF_VER_6_0_
/*===========================================================================*/
/**
@@ -42,26 +42,34 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 16
+#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
+#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
+#endif
/**
* @brief Time intervals data size.
* @note Allowed values are 16, 32 or 64 bits.
*/
+#if !defined(CH_CFG_INTERVALS_SIZE)
#define CH_CFG_INTERVALS_SIZE 32
+#endif
/**
* @brief Time types data size.
* @note Allowed values are 16 or 32 bits.
*/
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
/**
* @brief Time delta constant for the tick-less mode.
@@ -71,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
+#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 2
+#endif
/** @} */
@@ -94,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
+#if !defined(CH_CFG_TIME_QUANTUM)
#define CH_CFG_TIME_QUANTUM 0
+#endif
/**
* @brief Managed RAM size.
@@ -107,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
+#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
+#endif
/**
* @brief Idle thread automatic spawn suppression.
@@ -116,7 +130,9 @@ * function becomes the idle thread and must implement an
* infinite loop.
*/
+#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
/** @} */
@@ -135,7 +151,9 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
/** @} */
@@ -153,7 +171,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
+#endif
/**
* @brief Threads registry APIs.
@@ -161,7 +181,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
+#endif
/**
* @brief Threads synchronization APIs.
@@ -170,7 +192,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
+#endif
/**
* @brief Semaphores APIs.
@@ -178,7 +202,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
/**
* @brief Semaphores queuing mode.
@@ -189,7 +215,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
/**
* @brief Mutexes APIs.
@@ -197,7 +225,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
+#endif
/**
* @brief Enables recursive behavior on mutexes.
@@ -207,7 +237,9 @@ * @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
/**
* @brief Conditional Variables APIs.
@@ -217,7 +249,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
+#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
+#endif
/**
* @brief Conditional Variables APIs with timeout.
@@ -227,7 +261,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
/**
* @brief Events Flags APIs.
@@ -235,7 +271,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
+#endif
/**
* @brief Events Flags APIs with timeout.
@@ -245,7 +283,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
/**
* @brief Synchronous Messages APIs.
@@ -254,7 +294,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
+#endif
/**
* @brief Synchronous Messages queuing mode.
@@ -265,7 +307,9 @@ * requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
/**
* @brief Mailboxes APIs.
@@ -275,7 +319,9 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
+#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
+#endif
/**
* @brief Core Memory Manager APIs.
@@ -284,7 +330,9 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
+#endif
/**
* @brief Heap Allocator APIs.
@@ -296,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
+#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
+#endif
/**
* @brief Memory Pools Allocator APIs.
@@ -305,16 +355,31 @@ *
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
/**
- * @brief Objects FIFOs APIs.
+ * @brief Objects FIFOs APIs.
* @details If enabled then the objects FIFOs APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
+
+/**
+ * @brief Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES TRUE
+#endif
/**
* @brief Dynamic Threads APIs.
@@ -325,7 +390,9 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
+#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
+#endif
/** @} */
@@ -343,39 +410,60 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_CFG_USE_FACTORY)
#define CH_CFG_USE_FACTORY TRUE
+#endif
/**
* @brief Maximum length for object names.
* @details If the specified length is zero then the name is stored by
* pointer but this could have unintended side effects.
*/
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
/**
* @brief Enables the registry of generic objects.
*/
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
/**
* @brief Enables factory for generic buffers.
*/
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
/**
* @brief Enables factory for semaphores.
*/
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
/**
* @brief Enables factory for mailboxes.
*/
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
/**
* @brief Enables factory for objects FIFOs.
*/
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
+
+/**
+ * @brief Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES TRUE
+#endif
/** @} */
@@ -391,7 +479,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
+#endif
/**
* @brief Debug option, system state check.
@@ -400,7 +490,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#endif
/**
* @brief Debug option, parameters checks.
@@ -409,7 +501,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_CHECKS)
#define CH_DBG_ENABLE_CHECKS FALSE
+#endif
/**
* @brief Debug option, consistency checks.
@@ -419,7 +513,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_ENABLE_ASSERTS)
#define CH_DBG_ENABLE_ASSERTS FALSE
+#endif
/**
* @brief Debug option, trace buffer.
@@ -427,14 +523,18 @@ *
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
+#if !defined(CH_DBG_TRACE_MASK)
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+#endif
/**
* @brief Trace buffer entries.
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
* different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
/**
* @brief Debug option, stack checks.
@@ -446,7 +546,9 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#endif
/**
* @brief Debug option, stacks initialization.
@@ -456,7 +558,9 @@ *
* @note The default is @p FALSE.
*/
+#if !defined(CH_DBG_FILL_THREADS)
#define CH_DBG_FILL_THREADS FALSE
+#endif
/**
* @brief Debug option, threads profiling.
@@ -467,7 +571,9 @@ * @note This debug option is not currently compatible with the
* tickless mode.
*/
+#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
+#endif
/** @} */
@@ -479,6 +585,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
diff --git a/demos/STM32/RT-STM32L053-DISCOVERY/halconf.h b/demos/STM32/RT-STM32L053-DISCOVERY/cfg/halconf.h index d7793e22c..984177a9e 100644 --- a/demos/STM32/RT-STM32L053-DISCOVERY/halconf.h +++ b/demos/STM32/RT-STM32L053-DISCOVERY/cfg/halconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -28,160 +28,190 @@ #ifndef HALCONF_H
#define HALCONF_H
+#define _CHIBIOS_HAL_CONF_
+#define _CHIBIOS_HAL_CONF_VER_7_0_
+
#include "mcuconf.h"
/**
* @brief Enables the PAL subsystem.
*/
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
+#define HAL_USE_PAL TRUE
#endif
/**
* @brief Enables the ADC subsystem.
*/
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
+#define HAL_USE_ADC FALSE
#endif
/**
* @brief Enables the CAN subsystem.
*/
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
+#define HAL_USE_CAN FALSE
#endif
/**
* @brief Enables the cryptographic subsystem.
*/
#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
-#define HAL_USE_CRY FALSE
+#define HAL_USE_CRY FALSE
#endif
/**
* @brief Enables the DAC subsystem.
*/
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
+#define HAL_USE_DAC FALSE
#endif
/**
* @brief Enables the GPT subsystem.
*/
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
+#define HAL_USE_GPT FALSE
#endif
/**
* @brief Enables the I2C subsystem.
*/
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
+#define HAL_USE_I2C FALSE
#endif
/**
* @brief Enables the I2S subsystem.
*/
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
+#define HAL_USE_I2S FALSE
#endif
/**
* @brief Enables the ICU subsystem.
*/
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
+#define HAL_USE_ICU FALSE
#endif
/**
* @brief Enables the MAC subsystem.
*/
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
+#define HAL_USE_MAC FALSE
#endif
/**
* @brief Enables the MMC_SPI subsystem.
*/
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
+#define HAL_USE_MMC_SPI FALSE
#endif
/**
* @brief Enables the PWM subsystem.
*/
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the QSPI subsystem.
- */
-#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
-#define HAL_USE_QSPI FALSE
+#define HAL_USE_PWM FALSE
#endif
/**
* @brief Enables the RTC subsystem.
*/
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
+#define HAL_USE_RTC FALSE
#endif
/**
* @brief Enables the SDC subsystem.
*/
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
+#define HAL_USE_SDC FALSE
#endif
/**
* @brief Enables the SERIAL subsystem.
*/
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL TRUE
+#define HAL_USE_SERIAL TRUE
#endif
/**
* @brief Enables the SERIAL over USB subsystem.
*/
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SIO subsystem.
+ */
+#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
+#define HAL_USE_SIO FALSE
#endif
/**
* @brief Enables the SPI subsystem.
*/
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the TRNG subsystem.
+ */
+#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
+#define HAL_USE_TRNG FALSE
#endif
/**
* @brief Enables the UART subsystem.
*/
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
+#define HAL_USE_UART FALSE
#endif
/**
* @brief Enables the USB subsystem.
*/
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
+#define HAL_USE_USB FALSE
#endif
/**
* @brief Enables the WDG subsystem.
*/
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
+#define HAL_USE_WDG FALSE
+#endif
+
+/**
+ * @brief Enables the WSPI subsystem.
+ */
+#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
+#define HAL_USE_WSPI FALSE
+#endif
+
+/*===========================================================================*/
+/* PAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define PAL_USE_CALLBACKS FALSE
+#endif
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
+#define PAL_USE_WAIT FALSE
#endif
/*===========================================================================*/
@@ -193,7 +223,7 @@ * @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
+#define ADC_USE_WAIT TRUE
#endif
/**
@@ -201,7 +231,7 @@ * @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
@@ -212,7 +242,14 @@ * @brief Sleep mode related APIs inclusion switch.
*/
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/**
+ * @brief Enforces the driver to use direct callbacks rather than OSAL events.
+ */
+#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define CAN_ENFORCE_USE_CALLBACKS FALSE
#endif
/*===========================================================================*/
@@ -238,6 +275,26 @@ #endif
/*===========================================================================*/
+/* DAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
+#define DAC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define DAC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
/* I2C driver related settings. */
/*===========================================================================*/
@@ -245,7 +302,7 @@ * @brief Enables the mutual exclusion APIs on the I2C bus.
*/
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
@@ -253,17 +310,17 @@ /*===========================================================================*/
/**
- * @brief Enables an event sources for incoming packets.
+ * @brief Enables the zero-copy API.
*/
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
+#define MAC_USE_ZERO_COPY FALSE
#endif
/**
* @brief Enables an event sources for incoming packets.
*/
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
+#define MAC_USE_EVENTS TRUE
#endif
/*===========================================================================*/
@@ -279,7 +336,7 @@ * use a DMA channel and heavily loads the CPU.
*/
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
+#define MMC_NICE_WAITING TRUE
#endif
/*===========================================================================*/
@@ -291,7 +348,7 @@ * @note Attempts are performed at 10mS intervals.
*/
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
+#define SDC_INIT_RETRY 100
#endif
/**
@@ -300,7 +357,7 @@ * at @p FALSE.
*/
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
+#define SDC_MMC_SUPPORT FALSE
#endif
/**
@@ -310,7 +367,21 @@ * lower priority, this may slow down the driver a bit however.
*/
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/**
+ * @brief OCR initialization constant for V20 cards.
+ */
+#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR_V20 0x50FF8000U
+#endif
+
+/**
+ * @brief OCR initialization constant for non-V20 cards.
+ */
+#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR 0x80100000U
#endif
/*===========================================================================*/
@@ -323,7 +394,7 @@ * default configuration.
*/
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
+#define SERIAL_DEFAULT_BITRATE 38400
#endif
/**
@@ -334,7 +405,7 @@ * buffers.
*/
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
+#define SERIAL_BUFFERS_SIZE 16
#endif
/*===========================================================================*/
@@ -349,7 +420,7 @@ * buffers.
*/
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
+#define SERIAL_USB_BUFFERS_SIZE 256
#endif
/**
@@ -357,7 +428,7 @@ * @note The default is 2 buffers.
*/
#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER 2
+#define SERIAL_USB_BUFFERS_NUMBER 2
#endif
/*===========================================================================*/
@@ -369,15 +440,32 @@ * @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables circular transfers APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
+#define SPI_USE_CIRCULAR FALSE
#endif
+
/**
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/**
+ * @brief Handling method for SPI CS line.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
+#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
#endif
/*===========================================================================*/
@@ -389,7 +477,7 @@ * @note Disabling this option saves both code and data space.
*/
#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT FALSE
+#define UART_USE_WAIT FALSE
#endif
/**
@@ -397,7 +485,7 @@ * @note Disabling this option saves both code and data space.
*/
#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION FALSE
+#define UART_USE_MUTUAL_EXCLUSION FALSE
#endif
/*===========================================================================*/
@@ -409,7 +497,27 @@ * @note Disabling this option saves both code and data space.
*/
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT FALSE
+#define USB_USE_WAIT FALSE
+#endif
+
+/*===========================================================================*/
+/* WSPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
+#define WSPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define WSPI_USE_MUTUAL_EXCLUSION TRUE
#endif
#endif /* HALCONF_H */
diff --git a/demos/STM32/RT-STM32L053-DISCOVERY/mcuconf.h b/demos/STM32/RT-STM32L053-DISCOVERY/cfg/mcuconf.h index b99e21477..89b9135e5 100644 --- a/demos/STM32/RT-STM32L053-DISCOVERY/mcuconf.h +++ b/demos/STM32/RT-STM32L053-DISCOVERY/cfg/mcuconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
diff --git a/demos/STM32/RT-STM32L053-DISCOVERY/main.c b/demos/STM32/RT-STM32L053-DISCOVERY/main.c index b56715e91..29816d106 100644 --- a/demos/STM32/RT-STM32L053-DISCOVERY/main.c +++ b/demos/STM32/RT-STM32L053-DISCOVERY/main.c @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
diff --git a/demos/STM32/RT-STM32L053-DISCOVERY/usbcfg.c b/demos/STM32/RT-STM32L053-DISCOVERY/usbcfg.c deleted file mode 100644 index db05bbd8a..000000000 --- a/demos/STM32/RT-STM32L053-DISCOVERY/usbcfg.c +++ /dev/null @@ -1,342 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "hal.h"
-
-/* Virtual serial port over USB.*/
-SerialUSBDriver SDU1;
-
-/*
- * Endpoints to be used for USBD1.
- */
-#define USBD1_DATA_REQUEST_EP 1
-#define USBD1_DATA_AVAILABLE_EP 1
-#define USBD1_INTERRUPT_REQUEST_EP 2
-
-/*
- * USB Device Descriptor.
- */
-static const uint8_t vcom_device_descriptor_data[18] = {
- USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */
- 0x02, /* bDeviceClass (CDC). */
- 0x00, /* bDeviceSubClass. */
- 0x00, /* bDeviceProtocol. */
- 0x40, /* bMaxPacketSize. */
- 0x0483, /* idVendor (ST). */
- 0x5740, /* idProduct. */
- 0x0200, /* bcdDevice. */
- 1, /* iManufacturer. */
- 2, /* iProduct. */
- 3, /* iSerialNumber. */
- 1) /* bNumConfigurations. */
-};
-
-/*
- * Device Descriptor wrapper.
- */
-static const USBDescriptor vcom_device_descriptor = {
- sizeof vcom_device_descriptor_data,
- vcom_device_descriptor_data
-};
-
-/* Configuration Descriptor tree for a CDC.*/
-static const uint8_t vcom_configuration_descriptor_data[67] = {
- /* Configuration Descriptor.*/
- USB_DESC_CONFIGURATION(67, /* wTotalLength. */
- 0x02, /* bNumInterfaces. */
- 0x01, /* bConfigurationValue. */
- 0, /* iConfiguration. */
- 0xC0, /* bmAttributes (self powered). */
- 50), /* bMaxPower (100mA). */
- /* Interface Descriptor.*/
- USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */
- 0x00, /* bAlternateSetting. */
- 0x01, /* bNumEndpoints. */
- 0x02, /* bInterfaceClass (Communications
- Interface Class, CDC section
- 4.2). */
- 0x02, /* bInterfaceSubClass (Abstract
- Control Model, CDC section 4.3). */
- 0x01, /* bInterfaceProtocol (AT commands,
- CDC section 4.4). */
- 0), /* iInterface. */
- /* Header Functional Descriptor (CDC section 5.2.3).*/
- USB_DESC_BYTE (5), /* bLength. */
- USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
- USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header
- Functional Descriptor. */
- USB_DESC_BCD (0x0110), /* bcdCDC. */
- /* Call Management Functional Descriptor. */
- USB_DESC_BYTE (5), /* bFunctionLength. */
- USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
- USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management
- Functional Descriptor). */
- USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */
- USB_DESC_BYTE (0x01), /* bDataInterface. */
- /* ACM Functional Descriptor.*/
- USB_DESC_BYTE (4), /* bFunctionLength. */
- USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
- USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract
- Control Management Descriptor). */
- USB_DESC_BYTE (0x02), /* bmCapabilities. */
- /* Union Functional Descriptor.*/
- USB_DESC_BYTE (5), /* bFunctionLength. */
- USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
- USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union
- Functional Descriptor). */
- USB_DESC_BYTE (0x00), /* bMasterInterface (Communication
- Class Interface). */
- USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class
- Interface). */
- /* Endpoint 2 Descriptor.*/
- USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80,
- 0x03, /* bmAttributes (Interrupt). */
- 0x0008, /* wMaxPacketSize. */
- 0xFF), /* bInterval. */
- /* Interface Descriptor.*/
- USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */
- 0x00, /* bAlternateSetting. */
- 0x02, /* bNumEndpoints. */
- 0x0A, /* bInterfaceClass (Data Class
- Interface, CDC section 4.5). */
- 0x00, /* bInterfaceSubClass (CDC section
- 4.6). */
- 0x00, /* bInterfaceProtocol (CDC section
- 4.7). */
- 0x00), /* iInterface. */
- /* Endpoint 3 Descriptor.*/
- USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/
- 0x02, /* bmAttributes (Bulk). */
- 0x0040, /* wMaxPacketSize. */
- 0x00), /* bInterval. */
- /* Endpoint 1 Descriptor.*/
- USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/
- 0x02, /* bmAttributes (Bulk). */
- 0x0040, /* wMaxPacketSize. */
- 0x00) /* bInterval. */
-};
-
-/*
- * Configuration Descriptor wrapper.
- */
-static const USBDescriptor vcom_configuration_descriptor = {
- sizeof vcom_configuration_descriptor_data,
- vcom_configuration_descriptor_data
-};
-
-/*
- * U.S. English language identifier.
- */
-static const uint8_t vcom_string0[] = {
- USB_DESC_BYTE(4), /* bLength. */
- USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
- USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */
-};
-
-/*
- * Vendor string.
- */
-static const uint8_t vcom_string1[] = {
- USB_DESC_BYTE(38), /* bLength. */
- USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
- 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0,
- 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0,
- 'c', 0, 's', 0
-};
-
-/*
- * Device Description string.
- */
-static const uint8_t vcom_string2[] = {
- USB_DESC_BYTE(56), /* bLength. */
- USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
- 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0,
- 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0,
- 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0,
- 'o', 0, 'r', 0, 't', 0
-};
-
-/*
- * Serial Number string.
- */
-static const uint8_t vcom_string3[] = {
- USB_DESC_BYTE(8), /* bLength. */
- USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
- '0' + CH_KERNEL_MAJOR, 0,
- '0' + CH_KERNEL_MINOR, 0,
- '0' + CH_KERNEL_PATCH, 0
-};
-
-/*
- * Strings wrappers array.
- */
-static const USBDescriptor vcom_strings[] = {
- {sizeof vcom_string0, vcom_string0},
- {sizeof vcom_string1, vcom_string1},
- {sizeof vcom_string2, vcom_string2},
- {sizeof vcom_string3, vcom_string3}
-};
-
-/*
- * Handles the GET_DESCRIPTOR callback. All required descriptors must be
- * handled here.
- */
-static const USBDescriptor *get_descriptor(USBDriver *usbp,
- uint8_t dtype,
- uint8_t dindex,
- uint16_t lang) {
-
- (void)usbp;
- (void)lang;
- switch (dtype) {
- case USB_DESCRIPTOR_DEVICE:
- return &vcom_device_descriptor;
- case USB_DESCRIPTOR_CONFIGURATION:
- return &vcom_configuration_descriptor;
- case USB_DESCRIPTOR_STRING:
- if (dindex < 4)
- return &vcom_strings[dindex];
- }
- return NULL;
-}
-
-/**
- * @brief IN EP1 state.
- */
-static USBInEndpointState ep1instate;
-
-/**
- * @brief OUT EP1 state.
- */
-static USBOutEndpointState ep1outstate;
-
-/**
- * @brief EP1 initialization structure (both IN and OUT).
- */
-static const USBEndpointConfig ep1config = {
- USB_EP_MODE_TYPE_BULK,
- NULL,
- sduDataTransmitted,
- sduDataReceived,
- 0x0040,
- 0x0040,
- &ep1instate,
- &ep1outstate,
- 2,
- NULL
-};
-
-/**
- * @brief IN EP2 state.
- */
-static USBInEndpointState ep2instate;
-
-/**
- * @brief EP2 initialization structure (IN only).
- */
-static const USBEndpointConfig ep2config = {
- USB_EP_MODE_TYPE_INTR,
- NULL,
- sduInterruptTransmitted,
- NULL,
- 0x0010,
- 0x0000,
- &ep2instate,
- NULL,
- 1,
- NULL
-};
-
-/*
- * Handles the USB driver global events.
- */
-static void usb_event(USBDriver *usbp, usbevent_t event) {
- extern SerialUSBDriver SDU1;
-
- switch (event) {
- case USB_EVENT_ADDRESS:
- return;
- case USB_EVENT_CONFIGURED:
- chSysLockFromISR();
-
- /* Enables the endpoints specified into the configuration.
- Note, this callback is invoked from an ISR so I-Class functions
- must be used.*/
- usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config);
- usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config);
-
- /* Resetting the state of the CDC subsystem.*/
- sduConfigureHookI(&SDU1);
-
- chSysUnlockFromISR();
- return;
- case USB_EVENT_RESET:
- /* Falls into.*/
- case USB_EVENT_UNCONFIGURED:
- /* Falls into.*/
- case USB_EVENT_SUSPEND:
- chSysLockFromISR();
-
- /* Disconnection event on suspend.*/
- sduSuspendHookI(&SDU1);
-
- chSysUnlockFromISR();
- return;
- case USB_EVENT_WAKEUP:
- chSysLockFromISR();
-
- /* Disconnection event on suspend.*/
- sduWakeupHookI(&SDU1);
-
- chSysUnlockFromISR();
- return;
- case USB_EVENT_STALLED:
- return;
- }
- return;
-}
-
-/*
- * Handles the USB driver global events.
- */
-static void sof_handler(USBDriver *usbp) {
-
- (void)usbp;
-
- osalSysLockFromISR();
- sduSOFHookI(&SDU1);
- osalSysUnlockFromISR();
-}
-
-/*
- * USB driver configuration.
- */
-const USBConfig usbcfg = {
- usb_event,
- get_descriptor,
- sduRequestsHook,
- sof_handler
-};
-
-/*
- * Serial over USB driver configuration.
- */
-const SerialUSBConfig serusbcfg = {
- &USBD1,
- USBD1_DATA_REQUEST_EP,
- USBD1_DATA_AVAILABLE_EP,
- USBD1_INTERRUPT_REQUEST_EP
-};
diff --git a/demos/STM32/RT-STM32L053-DISCOVERY/usbcfg.h b/demos/STM32/RT-STM32L053-DISCOVERY/usbcfg.h deleted file mode 100644 index 3833bf9fd..000000000 --- a/demos/STM32/RT-STM32L053-DISCOVERY/usbcfg.h +++ /dev/null @@ -1,26 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef USBCFG_H
-#define USBCFG_H
-
-extern const USBConfig usbcfg;
-extern SerialUSBConfig serusbcfg;
-extern SerialUSBDriver SDU1;
-
-#endif /* USBCFG_H */
-
-/** @} */
|