diff options
Diffstat (limited to 'os/hal/platforms/LPC17xx/hal_lld.c')
| -rw-r--r-- | os/hal/platforms/LPC17xx/hal_lld.c | 158 |
1 files changed, 0 insertions, 158 deletions
diff --git a/os/hal/platforms/LPC17xx/hal_lld.c b/os/hal/platforms/LPC17xx/hal_lld.c deleted file mode 100644 index b207a5375..000000000 --- a/os/hal/platforms/LPC17xx/hal_lld.c +++ /dev/null @@ -1,158 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
- LPC17xx HAL driver - Copyright (C) 2013 Marcin Jokel
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file LPC17xx/hal_lld.c
- * @brief LPC17xx HAL subsystem low level driver source.
- *
- * @addtogroup HAL
- * @{
- */
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief Register missing in NXP header file.
- */
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local variables and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/**
- * @brief Low level HAL driver initialization.
- *
- * @notapi
- */
-void hal_lld_init(void) {
-
- /* SysTick initialization using the system clock.*/
- nvicSetSystemHandlerPriority(HANDLER_SYSTICK, CORTEX_PRIORITY_SYSTICK);
- SysTick->LOAD = LPC17xx_CCLK / CH_FREQUENCY - 1;
- SysTick->VAL = 0;
- SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
- SysTick_CTRL_ENABLE_Msk |
- SysTick_CTRL_TICKINT_Msk;
-
- /* DWT cycle counter enable.*/
- SCS_DEMCR |= SCS_DEMCR_TRCENA;
- DWT_CTRL |= DWT_CTRL_CYCCNTENA;
-
-#if defined(LPC17xx_DMA_REQUIRED)
- dmaInit();
-#endif
-}
-
-/**
- * @brief LPC17xx clocks and PLL initialization.
- * @note All the involved constants come from the file @p board.h.
- * @note This function must be invoked only after the system reset.
- *
- * @special
- */
-void LPC17xx_clock_init(void) {
-
- /* Flash wait states setting, the code takes care to not touch TBD bits.*/
- LPC_SC->FLASHCFG = (LPC_SC->FLASHCFG & ~(0x0000000F << 12)) | (LPC17xx_FLASHCFG_FLASHTIM << 12);
-
- /* System oscillator initialization if required.*/
-
-#if LPC17xx_MAINOSC_ENABLE
- LPC_SC->SCS = (1 << 5) | (LPC17xx_OSCRANGE << 4); /* Enable Main oscillator */
- while (!(LPC_SC->SCS & (1 << 6)))
- ; /* Wait for main oscillator to be ready */
-#endif
-
- /* Peripheral clock divider initialization, must be set before enabling Main PLL (PLL0).
- Read errata sheet ES_LPC176x. */
- LPC_SC->PCLKSEL0 = LPC17xx_PCLKSEL0;
- LPC_SC->PCLKSEL1 = LPC17xx_PCLKSEL1;
-
- LPC_SC->CCLKCFG = LPC17xx_CCLK_DIV - 1; /* Set CPU clock divider */
-
- LPC_SC->CLKSRCSEL = LPC17xx_SYSCLK_SELECT; /* Select clock source for PLL0 if enabled or CPU */
-
-#if LPC17xx_MAINPLL_ENABLE
-
- /* PLL0 configuration and start */
- LPC_SC->PLL0CFG = (LPC17xx_PLL0CFG_NSEL0 << 16) | LPC17xx_PLL0CFG_MSEL0;
- LPC_SC->PLL0FEED = 0xAA;
- LPC_SC->PLL0FEED = 0x55;
-
- LPC_SC->PLL0CON = 0x01; /* Enable PLL0. */
- LPC_SC->PLL0FEED = 0xAA;
- LPC_SC->PLL0FEED = 0x55;
- while (!(LPC_SC->PLL0STAT & (1UL << 26)))
- ; /* Wait for PLL0 locked */
-
- LPC_SC->PLL0CON = 0x03; /* Enable and Connect PLL0. */
- LPC_SC->PLL0FEED = 0xAA;
- LPC_SC->PLL0FEED = 0x55;
- while (!(LPC_SC->PLL0STAT & ((1UL << 25) | (1UL << 24))))
- ; /* Wait for PLL0 connected */
-
-#endif /* LPC17xx_MAINPLL_ENABLE == TRUE */
-
-#if LPC17xx_USBPLL_ENABLE
- /* PLL1 configuration and start */
- LPC_SC->PLL1CFG = (LPC17xx_PLL1CFG_PSEL1 << 5) | LPC17xx_PLL1CFG_MSEL1;
- LPC_SC->PLL1FEED = 0xAA;
- LPC_SC->PLL1FEED = 0x55;
-
- LPC_SC->PLL1CON = 0x01; /* Enable PLL1. */
- LPC_SC->PLL1FEED = 0xAA;
- LPC_SC->PLL1FEED = 0x55;
- while (!(LPC_SC->PLL1STAT & (1UL << 10)))
- ; /* Wait for PLL1 locked */
-
- LPC_SC->PLL1CON = 0x03; /* Enable and Connect PLL1. */
- LPC_SC->PLL1FEED = 0xAA;
- LPC_SC->PLL1FEED = 0x55;
- while (!(LPC_SC->PLL1STAT & ((1UL << 9) | (1UL << 8))))
- ; /* Wait for PLL1 connected */
-#endif /* LPC17xx_USBPLL_ENABLE == TRUE */
-
-#if !LPC17xx_USBPLL_ENABLE && HAL_USE_USB
- LPC_SC->USBCLKCFG = LPC17xx_USBCLKPLL0_SELECT;
-#endif
-
- /* Power control configuration */
- LPC_SC->PCONP = (1 << 15) | (1 << 9); /* Enable power for GPIO and RTC */
-
-#if LPC17xx_CLKOUT_ENABLE
- LPC_SC->CLKOUTCFG = (1UL << 8) | ((LPC17xx_CLKOUT_DIV - 1) << 4) | LPC17xx_CLKOUT_SELECT;
-#endif
-}
-
-/** @} */
|