diff options
Diffstat (limited to 'os/hal/platforms/SPC563Mxx/serial_lld.h')
| -rw-r--r-- | os/hal/platforms/SPC563Mxx/serial_lld.h | 157 |
1 files changed, 0 insertions, 157 deletions
diff --git a/os/hal/platforms/SPC563Mxx/serial_lld.h b/os/hal/platforms/SPC563Mxx/serial_lld.h deleted file mode 100644 index b02b160b1..000000000 --- a/os/hal/platforms/SPC563Mxx/serial_lld.h +++ /dev/null @@ -1,157 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011,2012 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file SPC56x/serial_lld.h
- * @brief SPC563 low level serial driver header.
- *
- * @addtogroup SERIAL
- * @{
- */
-
-#ifndef _SERIAL_LLD_H_
-#define _SERIAL_LLD_H_
-
-#if HAL_USE_SERIAL || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-#define SD_MODE_PARITY_MASK 0x03 /**< @brief Parity field mask. */
-#define SD_MODE_PARITY_NONE 0x00 /**< @brief No parity. */
-#define SD_MODE_PARITY_EVEN 0x01 /**< @brief Even parity. */
-#define SD_MODE_PARITY_ODD 0x02 /**< @brief Odd parity. */
-
-#define SD_MODE_NORMAL 0x00 /**< @brief Normal operations. */
-#define SD_MODE_LOOPBACK 0x80 /**< @brief Internal loopback. */
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-/**
- * @brief eSCI-A driver enable switch.
- * @details If set to @p TRUE the support for eSCI-A is included.
- * @note The default is @p TRUE.
- */
-#if !defined(USE_SPC563_ESCIA) || defined(__DOXYGEN__)
-#define USE_SPC563_ESCIA TRUE
-#endif
-
-/**
- * @brief eSCI-B driver enable switch.
- * @details If set to @p TRUE the support for eSCI-B is included.
- * @note The default is @p TRUE.
- */
-#if !defined(USE_SPC563_ESCIB) || defined(__DOXYGEN__)
-#define USE_SPC563_ESCIB TRUE
-#endif
-
-/**
- * @brief eSCI-A interrupt priority level setting.
- */
-#if !defined(SPC563_ESCIA_PRIORITY) || defined(__DOXYGEN__)
-#define SPC563_ESCIA_PRIORITY 8
-#endif
-
-/**
- * @brief eSCI-B interrupt priority level setting.
- */
-#if !defined(SPC563_ESCIB_PRIORITY) || defined(__DOXYGEN__)
-#define SPC563_ESCIB_PRIORITY 8
-#endif
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/**
- * @brief Generic Serial Driver configuration structure.
- * @details An instance of this structure must be passed to @p sdStart()
- * in order to configure and start a serial driver operations.
- * @note This structure content is architecture dependent, each driver
- * implementation defines its own version and the custom static
- * initializers.
- */
-typedef struct {
- /**
- * @brief Bit rate.
- */
- uint32_t sc_speed;
- /**
- * @brief Mode flags.
- */
- uint8_t sc_mode;
-} SerialConfig;
-
-/**
- * @brief @p SerialDriver specific data.
- */
-#define _serial_driver_data \
- _base_asynchronous_channel_data \
- /* Driver state.*/ \
- sdstate_t state; \
- /* Input queue.*/ \
- InputQueue iqueue; \
- /* Output queue.*/ \
- OutputQueue oqueue; \
- /* Input circular buffer.*/ \
- uint8_t ib[SERIAL_BUFFERS_SIZE]; \
- /* Output circular buffer.*/ \
- uint8_t ob[SERIAL_BUFFERS_SIZE]; \
- /* End of the mandatory fields.*/ \
- /* Pointer to the volatile eSCI registers block.*/ \
- volatile struct ESCI_tag *escip;
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-#if USE_SPC563_ESCIA && !defined(__DOXYGEN__)
-extern SerialDriver SD1;
-#endif
-#if USE_SPC563_ESCIB && !defined(__DOXYGEN__)
-extern SerialDriver SD2;
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void sd_lld_init(void);
- void sd_lld_start(SerialDriver *sdp, const SerialConfig *config);
- void sd_lld_stop(SerialDriver *sdp);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* HAL_USE_SERIAL */
-
-#endif /* _SERIAL_LLD_H_ */
-
-/** @} */
|