diff options
Diffstat (limited to 'testhal/LPC122x/IRQ_STORM/mcuconf.h')
-rw-r--r-- | testhal/LPC122x/IRQ_STORM/mcuconf.h | 85 |
1 files changed, 0 insertions, 85 deletions
diff --git a/testhal/LPC122x/IRQ_STORM/mcuconf.h b/testhal/LPC122x/IRQ_STORM/mcuconf.h deleted file mode 100644 index 3b871766e..000000000 --- a/testhal/LPC122x/IRQ_STORM/mcuconf.h +++ /dev/null @@ -1,85 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
- LPC122x EXT driver - Copyright (C) 2013 Marcin Jokel
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/*
- * LPC1227 drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the driver
- * is enabled in halconf.h.
- *
- * IRQ priorities:
- * 3...0 Lowest...highest.
- */
-
-/*
- * HAL driver system settings.
- */
-#define LPC122x_PLLCLK_SOURCE SYSPLLCLKSEL_SYSOSC
-#define LPC122x_SYSPLL_MUL 3
-#define LPC122x_SYSPLL_DIV 8
-#define LPC122x_MAINCLK_SOURCE SYSMAINCLKSEL_PLLOUT
-#define LPC122x_SYSABHCLK_DIV 1
-
-/*
- * ADC driver system settings.
- */
-
-/*
- * CAN driver system settings.
- */
-
-/*
- * GPT driver system settings.
- */
-#define LPC122x_GPT_USE_CT16B0 TRUE
-#define LPC122x_GPT_USE_CT16B1 TRUE
-#define LPC122x_GPT_USE_CT32B0 TRUE
-#define LPC122x_GPT_USE_CT32B1 TRUE
-#define LPC122x_GPT_CT16B0_IRQ_PRIORITY 1
-#define LPC122x_GPT_CT16B1_IRQ_PRIORITY 3
-#define LPC122x_GPT_CT32B0_IRQ_PRIORITY 2
-#define LPC122x_GPT_CT32B1_IRQ_PRIORITY 2
-
-/*
- * PWM driver system settings.
- */
-
-/*
- * SERIAL driver system settings.
- */
-#define LPC122x_SERIAL_USE_UART0 TRUE
-#define LPC122x_SERIAL_FIFO_PRELOAD 16
-#define LPC122x_SERIAL_UART0CLKDIV 1
-#define LPC122x_SERIAL_UART0_IRQ_PRIORITY 3
-#define LPC122x_SERIAL_TXD0_SELECTOR TXD0_IS_PIO0_2
-#define LPC122x_SERIAL_RXD0_SELECTOR RXD0_IS_PIO0_1
-
-#define LPC122x_SERIAL_USE_UART1 FALSE
-#define LPC122x_SERIAL_FIFO_PRELOAD 16
-#define LPC122x_SERIAL_UART1CLKDIV 1
-#define LPC122x_SERIAL_UART1_IRQ_PRIORITY 3
-#define LPC122x_SERIAL_RXD1_SELECTOR RXD1_IS_PIO0_8
-#define LPC122x_SERIAL_TXD1_SELECTOR TXD1_IS_PIO0_9
-
-/*
- * SPI driver system settings.
- */
-#define LPC122x_SPI_USE_SSP0 TRUE
-#define LPC122x_SPI_SSP0CLKDIV 1
-#define LPC122x_SPI_SSP0_IRQ_PRIORITY 1
-#define LPC122x_SPI_SSP_ERROR_HOOK(spip) chSysHalt()
|