1 files changed, 0 insertions, 96 deletions
diff --git a/testhal/LPC17xx/I2C/mcuconf.h b/testhal/LPC17xx/I2C/mcuconf.h
deleted file mode 100644
index 756c89823..000000000
--- a/testhal/LPC17xx/I2C/mcuconf.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
-    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * LPC17xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the driver
- * is enabled in halconf.h.
- *
- * IRQ priorities:
- * 7...0        Lowest...highest.
- */
-
-/*
- * HAL driver system settings.
- */
-#define LPC17xx_MAINOSC_ENABLE              TRUE
-#define LPC17xx_SYSCLK_SELECT               CLKSRCSEL_MAINOSC
-#define LPC17xx_MAINPLL_ENABLE              TRUE
-#define LPC17xx_MAINPLL_MUL                 30
-#define LPC17xx_MAINPLL_PREDIV              1
-#define LPC17xx_USBPLL_ENABLE               FALSE
-#define LPC17xx_USBPLL_MUL                  4
-#define LPC17xx_USBPLL_DIV                  4
-#define LPC17xx_CCLK_DIV                    3
-#define LPC17xx_PCLK_SELECT                 PCLKSEL_CCLK
-#define LPC17xx_CLKOUT_ENABLE               FALSE
-#define LPC17xx_CLKOUT_DIV                  4
-#define LPC17xx_CLKOUT_SELECT               CLKOUTSEL_CCLK
-
-/*
- * GPT driver system settings.
- */
-#define LPC17xx_GPT_USE_TIM0                TRUE
-#define LPC17xx_GPT_USE_TIM1                TRUE
-#define LPC17xx_GPT_USE_TIM2                TRUE
-#define LPC17xx_GPT_USE_TIM3                TRUE
-#define LPC17xx_GPT_TIM0_IRQ_PRIORITY       2
-#define LPC17xx_GPT_TIM1_IRQ_PRIORITY       6
-#define LPC17xx_GPT_TIM2_IRQ_PRIORITY       2
-#define LPC17xx_GPT_TIM3_IRQ_PRIORITY       2
-
-/*
- * SERIAL driver system settings.
- */
-#define LPC17xx_SERIAL_USE_UART0            TRUE
-#define LPC17xx_SERIAL_USE_UART1            FALSE
-#define LPC17xx_SERIAL_USE_UART2            FALSE
-#define LPC17xx_SERIAL_USE_UART3            FALSE
-#define LPC17xx_SERIAL_FIFO_PRELOAD         16
-#define LPC17xx_SERIAL_UART0_IRQ_PRIORITY   3
-#define LPC17xx_SERIAL_UART1_IRQ_PRIORITY   3
-#define LPC17xx_SERIAL_UART2_IRQ_PRIORITY   3
-#define LPC17xx_SERIAL_UART3_IRQ_PRIORITY   3
-
-/*
- * I2C driver system settings.
- */
-#define LPC17xx_I2C_USE_I2C0                FALSE
-#define LPC17xx_I2C_USE_I2C1                TRUE
-#define LPC17xx_I2C_USE_I2C2                FALSE
-#define LPC17xx_I2C_I2C0_IRQ_PRIORITY       3
-#define LPC17xx_I2C_I2C1_IRQ_PRIORITY       3
-#define LPC17xx_I2C_I2C2_IRQ_PRIORITY       3
-
-/*
- * SPI driver system settings.
- */
-#define LPC17xx_SPI_USE_SSP0                FALSE
-#define LPC17xx_SPI_USE_SSP1                FALSE
-#define LPC17xx_SPI_SSP0CLKDIV              1
-#define LPC17xx_SPI_SSP1CLKDIV              1
-#define LPC17xx_SPI_SSP0_IRQ_PRIORITY       5
-#define LPC17xx_SPI_SSP1_IRQ_PRIORITY       5
-
-/*
- * RTC driver system settings.
- */
-#define LPC17xx_RTC_IS_CALENDAR             TRUE
-#define LPC17xx_RTC_USE_ALARM               TRUE
-#define LPC17xx_RTC_IRQ_PRIORITY            3
-