1 files changed, 0 insertions, 120 deletions
diff --git a/testhal/LPC43xx/DMA_MEM/main.c b/testhal/LPC43xx/DMA_MEM/main.c
deleted file mode 100644
index 39dbb7e2b..000000000
--- a/testhal/LPC43xx/DMA_MEM/main.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
-    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-#include "chprintf.h"
-
-#define MEM_SIZE    50
-
-BaseSequentialStream  * chp = (BaseSequentialStream  *)&SD4;
-
-uint32_t mem_src[MEM_SIZE];
-uint32_t mem_dst[MEM_SIZE];
-
-static void dma_mem_callback(void * dummy, uint32_t flags) {
-  (void)dummy;
-  (void)flags;
-}
-
-/*
- * Red LEDs blinker thread, times are in milliseconds.
- */
-static WORKING_AREA(waThread1, 128);
-static msg_t Thread1(void *arg) {
-
-  (void)arg;
-  chRegSetThreadName("blinker");
-  while (TRUE) {
-    palTogglePad(GPIO2, GPIO2_LED);
-    chThdSleepMilliseconds(500);
-  }
-}
-
-/*
- * Application entry point.
- */
-int main(void) {
-  uint32_t i;
-  /*
-   * System initializations.
-   * - HAL initialization, this also initializes the configured device drivers
-   *   and performs the board-specific initializations.
-   * - Kernel initialization, the main() function becomes a thread and the
-   *   RTOS is active.
-   */
-  halInit();
-  chSysInit();
-
-  /*
-   * Creates the blinker thread.
-   */
-  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
-
-  /*
-   * Activates the SD driver 1.
-   */
-  sdStart(&SD4, NULL);          /* Default is 38400-8-N-1.*/
-
-  chprintf(chp, "Data before dma transfer.\r\n");
-  chprintf(chp, "source \t destination\r\n");
-  for (i = 0; i < MEM_SIZE; i++) {
-     mem_src[i] = i;
-     mem_dst[i] = 0;
-     chprintf(chp, "%x \t %x\r\n", mem_src[i], mem_dst[i]);
-  }
-
-  dmaChannelAllocate(DMA_CHANNEL0, &dma_mem_callback, NULL);
-  dmaChannelSrcAddr(DMA_CHANNEL0, &mem_src[0]);
-  dmaChannelDstAddr(DMA_CHANNEL0, &mem_dst[0]);
-  dmaChannelControl(DMA_CHANNEL0, DMA_CTRL_TRANSFER_SIZE(MEM_SIZE)  |
-                                  DMA_CTRL_SRC_BSIZE_16             |
-                                  DMA_CTRL_DST_BSIZE_16             |
-                                  DMA_CTRL_SRC_WIDTH_WORD           |
-                                  DMA_CTRL_DST_WIDTH_WORD           |
-                                  DMA_CTRL_SRC_AHBM0                |
-                                  DMA_CTRL_DST_AHBM0                |
-                                  DMA_CTRL_SRC_INC                  |
-                                  DMA_CTRL_DST_INC                  |
-                                  DMA_CTRL_INT);
-
-  dmaChannelConfig(DMA_CHANNEL0,  DMA_CFG_CH_ENABLE   |
-                                  DMA_CFG_FCTRL_M2M   |
-                                  DMA_CFG_IE          |
-                                  DMA_CFG_ITC);
-
-  chThdSleepMilliseconds(5000);
-  chprintf(chp, "Data after dma transfer.\r\n");
-  chprintf(chp, "source \t destination\r\n");
-  for (i = 0; i < MEM_SIZE; i++) {
-    chprintf(chp, "%x \t %x\r\n", mem_src[i], mem_dst[i]);
-  }
-
-  for (i = 0; i < MEM_SIZE; i++)
-    if (mem_src[i] != mem_dst[i])
-      break;
-
-  if (i == MEM_SIZE)
-    chprintf(chp, "Data transfer ok.\r\n");
-  else
-    chprintf(chp, "Error.\r\n");
-
-  while (TRUE) {
-
-  chThdSleepMilliseconds(1000);
-
-  }
-}