1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
|
/* ---------------------------------------------------------------------------- */
/* Atmel Microcontroller Software Support */
/* SAM Software Package License */
/* ---------------------------------------------------------------------------- */
/* Copyright (c) 2015, Atmel Corporation */
/* */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following condition is met: */
/* */
/* - Redistributions of source code must retain the above copyright notice, */
/* this list of conditions and the disclaimer below. */
/* */
/* Atmel's name may not be used to endorse or promote products derived from */
/* this software without specific prior written permission. */
/* */
/* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */
/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */
/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */
/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */
/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */
/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ---------------------------------------------------------------------------- */
#ifndef _SAMA5D2_UDPHS_COMPONENT_
#define _SAMA5D2_UDPHS_COMPONENT_
/* ============================================================================= */
/** SOFTWARE API DEFINITION FOR USB High Speed Device Port */
/* ============================================================================= */
/** \addtogroup SAMA5D2_UDPHS USB High Speed Device Port */
/*@{*/
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
/** \brief UdphsDma hardware registers */
typedef struct {
__IO uint32_t UDPHS_DMANXTDSC; /**< \brief (UdphsDma Offset: 0x0) UDPHS DMA Next Descriptor Address Register */
__IO uint32_t UDPHS_DMAADDRESS; /**< \brief (UdphsDma Offset: 0x4) UDPHS DMA Channel Address Register */
__IO uint32_t UDPHS_DMACONTROL; /**< \brief (UdphsDma Offset: 0x8) UDPHS DMA Channel Control Register */
__IO uint32_t UDPHS_DMASTATUS; /**< \brief (UdphsDma Offset: 0xC) UDPHS DMA Channel Status Register */
} UdphsDma;
/** \brief UdphsEpt hardware registers */
typedef struct {
__IO uint32_t UDPHS_EPTCFG; /**< \brief (UdphsEpt Offset: 0x0) UDPHS Endpoint Configuration Register */
__O uint32_t UDPHS_EPTCTLENB; /**< \brief (UdphsEpt Offset: 0x4) UDPHS Endpoint Control Enable Register */
__O uint32_t UDPHS_EPTCTLDIS; /**< \brief (UdphsEpt Offset: 0x8) UDPHS Endpoint Control Disable Register */
__I uint32_t UDPHS_EPTCTL; /**< \brief (UdphsEpt Offset: 0xC) UDPHS Endpoint Control Register */
__I uint32_t Reserved1[1];
__O uint32_t UDPHS_EPTSETSTA; /**< \brief (UdphsEpt Offset: 0x14) UDPHS Endpoint Set Status Register */
__O uint32_t UDPHS_EPTCLRSTA; /**< \brief (UdphsEpt Offset: 0x18) UDPHS Endpoint Clear Status Register */
__I uint32_t UDPHS_EPTSTA; /**< \brief (UdphsEpt Offset: 0x1C) UDPHS Endpoint Status Register */
} UdphsEpt;
/** \brief Udphs hardware registers */
#define UDPHSEPT_NUMBER 16
#define UDPHSDMA_NUMBER 7
typedef struct {
__IO uint32_t UDPHS_CTRL; /**< \brief (Udphs Offset: 0x00) UDPHS Control Register */
__I uint32_t UDPHS_FNUM; /**< \brief (Udphs Offset: 0x04) UDPHS Frame Number Register */
__I uint32_t Reserved1[2];
__IO uint32_t UDPHS_IEN; /**< \brief (Udphs Offset: 0x10) UDPHS Interrupt Enable Register */
__I uint32_t UDPHS_INTSTA; /**< \brief (Udphs Offset: 0x14) UDPHS Interrupt Status Register */
__O uint32_t UDPHS_CLRINT; /**< \brief (Udphs Offset: 0x18) UDPHS Clear Interrupt Register */
__O uint32_t UDPHS_EPTRST; /**< \brief (Udphs Offset: 0x1C) UDPHS Endpoints Reset Register */
__I uint32_t Reserved2[44];
__IO uint32_t UDPHS_TSTSOFCNT; /**< \brief (Udphs Offset: 0xD0) UDPHS Test SOF Counter Register */
__IO uint32_t UDPHS_TSTCNTA; /**< \brief (Udphs Offset: 0xD4) UDPHS Test A Counter Register */
__IO uint32_t UDPHS_TSTCNTB; /**< \brief (Udphs Offset: 0xD8) UDPHS Test B Counter Register */
__IO uint32_t UDPHS_TSTMODEREG; /**< \brief (Udphs Offset: 0xDC) UDPHS Test Mode Register */
__IO uint32_t UDPHS_TST; /**< \brief (Udphs Offset: 0xE0) UDPHS Test Register */
__I uint32_t Reserved3[6];
__I uint32_t UDPHS_VERSION; /**< \brief (Udphs Offset: 0xFC) UDPHS Version Register */
UdphsEpt UDPHS_EPT[UDPHSEPT_NUMBER]; /**< \brief (Udphs Offset: 0x100) endpoint = 0 .. 15 */
UdphsDma UDPHS_DMA[UDPHSDMA_NUMBER]; /**< \brief (Udphs Offset: 0x300) channel = 0 .. 6 */
} Udphs;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- UDPHS_CTRL : (UDPHS Offset: 0x00) UDPHS Control Register -------- */
#define UDPHS_CTRL_DEV_ADDR_Pos 0
#define UDPHS_CTRL_DEV_ADDR_Msk (0x7fu << UDPHS_CTRL_DEV_ADDR_Pos) /**< \brief (UDPHS_CTRL) UDPHS Address (cleared upon USB reset) */
#define UDPHS_CTRL_DEV_ADDR(value) ((UDPHS_CTRL_DEV_ADDR_Msk & ((value) << UDPHS_CTRL_DEV_ADDR_Pos)))
#define UDPHS_CTRL_FADDR_EN (0x1u << 7) /**< \brief (UDPHS_CTRL) Function Address Enable (cleared upon USB reset) */
#define UDPHS_CTRL_EN_UDPHS (0x1u << 8) /**< \brief (UDPHS_CTRL) UDPHS Enable */
#define UDPHS_CTRL_DETACH (0x1u << 9) /**< \brief (UDPHS_CTRL) Detach Command */
#define UDPHS_CTRL_REWAKEUP (0x1u << 10) /**< \brief (UDPHS_CTRL) Send Remote Wake Up (cleared upon USB reset) */
#define UDPHS_CTRL_PULLD_DIS (0x1u << 11) /**< \brief (UDPHS_CTRL) Pull-Down Disable (cleared upon USB reset) */
/* -------- UDPHS_FNUM : (UDPHS Offset: 0x04) UDPHS Frame Number Register -------- */
#define UDPHS_FNUM_MICRO_FRAME_NUM_Pos 0
#define UDPHS_FNUM_MICRO_FRAME_NUM_Msk (0x7u << UDPHS_FNUM_MICRO_FRAME_NUM_Pos) /**< \brief (UDPHS_FNUM) Microframe Number (cleared upon USB reset) */
#define UDPHS_FNUM_FRAME_NUMBER_Pos 3
#define UDPHS_FNUM_FRAME_NUMBER_Msk (0x7ffu << UDPHS_FNUM_FRAME_NUMBER_Pos) /**< \brief (UDPHS_FNUM) Frame Number as defined in the Packet Field Formats (cleared upon USB reset) */
#define UDPHS_FNUM_FNUM_ERR (0x1u << 31) /**< \brief (UDPHS_FNUM) Frame Number CRC Error (cleared upon USB reset) */
/* -------- UDPHS_IEN : (UDPHS Offset: 0x10) UDPHS Interrupt Enable Register -------- */
#define UDPHS_IEN_DET_SUSPD (0x1u << 1) /**< \brief (UDPHS_IEN) Suspend Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_MICRO_SOF (0x1u << 2) /**< \brief (UDPHS_IEN) Micro-SOF Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_INT_SOF (0x1u << 3) /**< \brief (UDPHS_IEN) SOF Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_ENDRESET (0x1u << 4) /**< \brief (UDPHS_IEN) End Of Reset Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_WAKE_UP (0x1u << 5) /**< \brief (UDPHS_IEN) Wake Up CPU Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_ENDOFRSM (0x1u << 6) /**< \brief (UDPHS_IEN) End Of Resume Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_UPSTR_RES (0x1u << 7) /**< \brief (UDPHS_IEN) Upstream Resume Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_EPT_0 (0x1u << 8) /**< \brief (UDPHS_IEN) Endpoint 0 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_EPT_1 (0x1u << 9) /**< \brief (UDPHS_IEN) Endpoint 1 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_EPT_2 (0x1u << 10) /**< \brief (UDPHS_IEN) Endpoint 2 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_EPT_3 (0x1u << 11) /**< \brief (UDPHS_IEN) Endpoint 3 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_EPT_4 (0x1u << 12) /**< \brief (UDPHS_IEN) Endpoint 4 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_EPT_5 (0x1u << 13) /**< \brief (UDPHS_IEN) Endpoint 5 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_EPT_6 (0x1u << 14) /**< \brief (UDPHS_IEN) Endpoint 6 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_EPT_7 (0x1u << 15) /**< \brief (UDPHS_IEN) Endpoint 7 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_EPT_8 (0x1u << 16) /**< \brief (UDPHS_IEN) Endpoint 8 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_EPT_9 (0x1u << 17) /**< \brief (UDPHS_IEN) Endpoint 9 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_EPT_10 (0x1u << 18) /**< \brief (UDPHS_IEN) Endpoint 10 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_EPT_11 (0x1u << 19) /**< \brief (UDPHS_IEN) Endpoint 11 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_EPT_12 (0x1u << 20) /**< \brief (UDPHS_IEN) Endpoint 12 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_EPT_13 (0x1u << 21) /**< \brief (UDPHS_IEN) Endpoint 13 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_EPT_14 (0x1u << 22) /**< \brief (UDPHS_IEN) Endpoint 14 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_EPT_15 (0x1u << 23) /**< \brief (UDPHS_IEN) Endpoint 15 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_DMA_1 (0x1u << 25) /**< \brief (UDPHS_IEN) DMA Channel 1 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_DMA_2 (0x1u << 26) /**< \brief (UDPHS_IEN) DMA Channel 2 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_DMA_3 (0x1u << 27) /**< \brief (UDPHS_IEN) DMA Channel 3 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_DMA_4 (0x1u << 28) /**< \brief (UDPHS_IEN) DMA Channel 4 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_DMA_5 (0x1u << 29) /**< \brief (UDPHS_IEN) DMA Channel 5 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_DMA_6 (0x1u << 30) /**< \brief (UDPHS_IEN) DMA Channel 6 Interrupt Enable (cleared upon USB reset) */
#define UDPHS_IEN_DMA_7 (0x1u << 31) /**< \brief (UDPHS_IEN) DMA Channel 7 Interrupt Enable (cleared upon USB reset) */
/* -------- UDPHS_INTSTA : (UDPHS Offset: 0x14) UDPHS Interrupt Status Register -------- */
#define UDPHS_INTSTA_SPEED (0x1u << 0) /**< \brief (UDPHS_INTSTA) Speed Status */
#define UDPHS_INTSTA_DET_SUSPD (0x1u << 1) /**< \brief (UDPHS_INTSTA) Suspend Interrupt */
#define UDPHS_INTSTA_MICRO_SOF (0x1u << 2) /**< \brief (UDPHS_INTSTA) Micro Start Of Frame Interrupt */
#define UDPHS_INTSTA_INT_SOF (0x1u << 3) /**< \brief (UDPHS_INTSTA) Start Of Frame Interrupt */
#define UDPHS_INTSTA_ENDRESET (0x1u << 4) /**< \brief (UDPHS_INTSTA) End Of Reset Interrupt */
#define UDPHS_INTSTA_WAKE_UP (0x1u << 5) /**< \brief (UDPHS_INTSTA) Wake Up CPU Interrupt */
#define UDPHS_INTSTA_ENDOFRSM (0x1u << 6) /**< \brief (UDPHS_INTSTA) End Of Resume Interrupt */
#define UDPHS_INTSTA_UPSTR_RES (0x1u << 7) /**< \brief (UDPHS_INTSTA) Upstream Resume Interrupt */
#define UDPHS_INTSTA_EPT_0 (0x1u << 8) /**< \brief (UDPHS_INTSTA) Endpoint 0 Interrupt (cleared upon USB reset) */
#define UDPHS_INTSTA_EPT_1 (0x1u << 9) /**< \brief (UDPHS_INTSTA) Endpoint 1 Interrupt (cleared upon USB reset) */
#define UDPHS_INTSTA_EPT_2 (0x1u << 10) /**< \brief (UDPHS_INTSTA) Endpoint 2 Interrupt (cleared upon USB reset) */
#define UDPHS_INTSTA_EPT_3 (0x1u << 11) /**< \brief (UDPHS_INTSTA) Endpoint 3 Interrupt (cleared upon USB reset) */
#define UDPHS_INTSTA_EPT_4 (0x1u << 12) /**< \brief (UDPHS_INTSTA) Endpoint 4 Interrupt (cleared upon USB reset) */
#define UDPHS_INTSTA_EPT_5 (0x1u << 13) /**< \brief (UDPHS_INTSTA) Endpoint 5 Interrupt (cleared upon USB reset) */
#define UDPHS_INTSTA_EPT_6 (0x1u << 14) /**< \brief (UDPHS_INTSTA) Endpoint 6 Interrupt (cleared upon USB reset) */
#define UDPHS_INTSTA_EPT_7 (0x1u << 15) /**< \brief (UDPHS_INTSTA) Endpoint 7 Interrupt (cleared upon USB reset) */
#define UDPHS_INTSTA_EPT_8 (0x1u << 16) /**< \brief (UDPHS_INTSTA) Endpoint 8 Interrupt (cleared upon USB reset) */
#define UDPHS_INTSTA_EPT_9 (0x1u << 17) /**< \brief (UDPHS_INTSTA) Endpoint 9 Interrupt (cleared upon USB reset) */
#define UDPHS_INTSTA_EPT_10 (0x1u << 18) /**< \brief (UDPHS_INTSTA) Endpoint 10 Interrupt (cleared upon USB reset) */
#define UDPHS_INTSTA_EPT_11 (0x1u << 19) /**< \brief (UDPHS_INTSTA) Endpoint 11 Interrupt (cleared upon USB reset) */
#define UDPHS_INTSTA_EPT_12 (0x1u << 20) /**< \brief (UDPHS_INTSTA) Endpoint 12 Interrupt (cleared upon USB reset) */
#define UDPHS_INTSTA_EPT_13 (0x1u << 21) /**< \brief (UDPHS_INTSTA) Endpoint 13 Interrupt (cleared upon USB reset) */
#define UDPHS_INTSTA_EPT_14 (0x1u << 22) /**< \brief (UDPHS_INTSTA) Endpoint 14 Interrupt (cleared upon USB reset) */
#define UDPHS_INTSTA_EPT_15 (0x1u << 23) /**< \brief (UDPHS_INTSTA) Endpoint 15 Interrupt (cleared upon USB reset) */
#define UDPHS_INTSTA_DMA_1 (0x1u << 25) /**< \brief (UDPHS_INTSTA) DMA Channel 1 Interrupt */
#define UDPHS_INTSTA_DMA_2 (0x1u << 26) /**< \brief (UDPHS_INTSTA) DMA Channel 2 Interrupt */
#define UDPHS_INTSTA_DMA_3 (0x1u << 27) /**< \brief (UDPHS_INTSTA) DMA Channel 3 Interrupt */
#define UDPHS_INTSTA_DMA_4 (0x1u << 28) /**< \brief (UDPHS_INTSTA) DMA Channel 4 Interrupt */
#define UDPHS_INTSTA_DMA_5 (0x1u << 29) /**< \brief (UDPHS_INTSTA) DMA Channel 5 Interrupt */
#define UDPHS_INTSTA_DMA_6 (0x1u << 30) /**< \brief (UDPHS_INTSTA) DMA Channel 6 Interrupt */
#define UDPHS_INTSTA_DMA_7 (0x1u << 31) /**< \brief (UDPHS_INTSTA) DMA Channel 7 Interrupt */
/* -------- UDPHS_CLRINT : (UDPHS Offset: 0x18) UDPHS Clear Interrupt Register -------- */
#define UDPHS_CLRINT_DET_SUSPD (0x1u << 1) /**< \brief (UDPHS_CLRINT) Suspend Interrupt Clear */
#define UDPHS_CLRINT_MICRO_SOF (0x1u << 2) /**< \brief (UDPHS_CLRINT) Micro Start Of Frame Interrupt Clear */
#define UDPHS_CLRINT_INT_SOF (0x1u << 3) /**< \brief (UDPHS_CLRINT) Start Of Frame Interrupt Clear */
#define UDPHS_CLRINT_ENDRESET (0x1u << 4) /**< \brief (UDPHS_CLRINT) End Of Reset Interrupt Clear */
#define UDPHS_CLRINT_WAKE_UP (0x1u << 5) /**< \brief (UDPHS_CLRINT) Wake Up CPU Interrupt Clear */
#define UDPHS_CLRINT_ENDOFRSM (0x1u << 6) /**< \brief (UDPHS_CLRINT) End Of Resume Interrupt Clear */
#define UDPHS_CLRINT_UPSTR_RES (0x1u << 7) /**< \brief (UDPHS_CLRINT) Upstream Resume Interrupt Clear */
/* -------- UDPHS_EPTRST : (UDPHS Offset: 0x1C) UDPHS Endpoints Reset Register -------- */
#define UDPHS_EPTRST_EPT_0 (0x1u << 0) /**< \brief (UDPHS_EPTRST) Endpoint 0 Reset */
#define UDPHS_EPTRST_EPT_1 (0x1u << 1) /**< \brief (UDPHS_EPTRST) Endpoint 1 Reset */
#define UDPHS_EPTRST_EPT_2 (0x1u << 2) /**< \brief (UDPHS_EPTRST) Endpoint 2 Reset */
#define UDPHS_EPTRST_EPT_3 (0x1u << 3) /**< \brief (UDPHS_EPTRST) Endpoint 3 Reset */
#define UDPHS_EPTRST_EPT_4 (0x1u << 4) /**< \brief (UDPHS_EPTRST) Endpoint 4 Reset */
#define UDPHS_EPTRST_EPT_5 (0x1u << 5) /**< \brief (UDPHS_EPTRST) Endpoint 5 Reset */
#define UDPHS_EPTRST_EPT_6 (0x1u << 6) /**< \brief (UDPHS_EPTRST) Endpoint 6 Reset */
#define UDPHS_EPTRST_EPT_7 (0x1u << 7) /**< \brief (UDPHS_EPTRST) Endpoint 7 Reset */
#define UDPHS_EPTRST_EPT_8 (0x1u << 8) /**< \brief (UDPHS_EPTRST) Endpoint 8 Reset */
#define UDPHS_EPTRST_EPT_9 (0x1u << 9) /**< \brief (UDPHS_EPTRST) Endpoint 9 Reset */
#define UDPHS_EPTRST_EPT_10 (0x1u << 10) /**< \brief (UDPHS_EPTRST) Endpoint 10 Reset */
#define UDPHS_EPTRST_EPT_11 (0x1u << 11) /**< \brief (UDPHS_EPTRST) Endpoint 11 Reset */
#define UDPHS_EPTRST_EPT_12 (0x1u << 12) /**< \brief (UDPHS_EPTRST) Endpoint 12 Reset */
#define UDPHS_EPTRST_EPT_13 (0x1u << 13) /**< \brief (UDPHS_EPTRST) Endpoint 13 Reset */
#define UDPHS_EPTRST_EPT_14 (0x1u << 14) /**< \brief (UDPHS_EPTRST) Endpoint 14 Reset */
#define UDPHS_EPTRST_EPT_15 (0x1u << 15) /**< \brief (UDPHS_EPTRST) Endpoint 15 Reset */
/* -------- UDPHS_TSTSOFCNT : (UDPHS Offset: 0xD0) UDPHS Test SOF Counter Register -------- */
#define UDPHS_TSTSOFCNT_SOFCNTMAX_Pos 0
#define UDPHS_TSTSOFCNT_SOFCNTMAX_Msk (0x7fu << UDPHS_TSTSOFCNT_SOFCNTMAX_Pos) /**< \brief (UDPHS_TSTSOFCNT) SOF Counter Max Value */
#define UDPHS_TSTSOFCNT_SOFCNTMAX(value) ((UDPHS_TSTSOFCNT_SOFCNTMAX_Msk & ((value) << UDPHS_TSTSOFCNT_SOFCNTMAX_Pos)))
#define UDPHS_TSTSOFCNT_SOFCTLOAD (0x1u << 7) /**< \brief (UDPHS_TSTSOFCNT) SOF Counter Load */
/* -------- UDPHS_TSTCNTA : (UDPHS Offset: 0xD4) UDPHS Test A Counter Register -------- */
#define UDPHS_TSTCNTA_CNTAMAX_Pos 0
#define UDPHS_TSTCNTA_CNTAMAX_Msk (0x7fffu << UDPHS_TSTCNTA_CNTAMAX_Pos) /**< \brief (UDPHS_TSTCNTA) A Counter Max Value */
#define UDPHS_TSTCNTA_CNTAMAX(value) ((UDPHS_TSTCNTA_CNTAMAX_Msk & ((value) << UDPHS_TSTCNTA_CNTAMAX_Pos)))
#define UDPHS_TSTCNTA_CNTALOAD (0x1u << 15) /**< \brief (UDPHS_TSTCNTA) A Counter Load */
/* -------- UDPHS_TSTCNTB : (UDPHS Offset: 0xD8) UDPHS Test B Counter Register -------- */
#define UDPHS_TSTCNTB_CNTBMAX_Pos 0
#define UDPHS_TSTCNTB_CNTBMAX_Msk (0x7fffu << UDPHS_TSTCNTB_CNTBMAX_Pos) /**< \brief (UDPHS_TSTCNTB) B Counter Max Value */
#define UDPHS_TSTCNTB_CNTBMAX(value) ((UDPHS_TSTCNTB_CNTBMAX_Msk & ((value) << UDPHS_TSTCNTB_CNTBMAX_Pos)))
#define UDPHS_TSTCNTB_CNTBLOAD (0x1u << 15) /**< \brief (UDPHS_TSTCNTB) B Counter Load */
/* -------- UDPHS_TSTMODEREG : (UDPHS Offset: 0xDC) UDPHS Test Mode Register -------- */
#define UDPHS_TSTMODEREG_TSTMODE_Pos 1
#define UDPHS_TSTMODEREG_TSTMODE_Msk (0x1fu << UDPHS_TSTMODEREG_TSTMODE_Pos) /**< \brief (UDPHS_TSTMODEREG) UDPHS Core TestModeReg */
#define UDPHS_TSTMODEREG_TSTMODE(value) ((UDPHS_TSTMODEREG_TSTMODE_Msk & ((value) << UDPHS_TSTMODEREG_TSTMODE_Pos)))
/* -------- UDPHS_TST : (UDPHS Offset: 0xE0) UDPHS Test Register -------- */
#define UDPHS_TST_SPEED_CFG_Pos 0
#define UDPHS_TST_SPEED_CFG_Msk (0x3u << UDPHS_TST_SPEED_CFG_Pos) /**< \brief (UDPHS_TST) Speed Configuration */
#define UDPHS_TST_SPEED_CFG(value) ((UDPHS_TST_SPEED_CFG_Msk & ((value) << UDPHS_TST_SPEED_CFG_Pos)))
#define UDPHS_TST_SPEED_CFG_NORMAL (0x0u << 0) /**< \brief (UDPHS_TST) Normal mode: The macro is in Full Speed mode, ready to make a High Speed identification, if the host supports it and then to automatically switch to High Speed mode. */
#define UDPHS_TST_SPEED_CFG_HIGH_SPEED (0x2u << 0) /**< \brief (UDPHS_TST) Force High Speed: Set this value to force the hardware to work in High Speed mode. Only for debug or test purpose. */
#define UDPHS_TST_SPEED_CFG_FULL_SPEED (0x3u << 0) /**< \brief (UDPHS_TST) Force Full Speed: Set this value to force the hardware to work only in Full Speed mode. In this configuration, the macro will not respond to a High Speed reset handshake. */
#define UDPHS_TST_TST_J (0x1u << 2) /**< \brief (UDPHS_TST) Test J Mode */
#define UDPHS_TST_TST_K (0x1u << 3) /**< \brief (UDPHS_TST) Test K Mode */
#define UDPHS_TST_TST_PKT (0x1u << 4) /**< \brief (UDPHS_TST) Test Packet Mode */
#define UDPHS_TST_OPMODE2 (0x1u << 5) /**< \brief (UDPHS_TST) OpMode2 */
/* -------- UDPHS_VERSION : (UDPHS Offset: 0xFC) UDPHS Version Register -------- */
#define UDPHS_VERSION_VERSION_Pos 0
#define UDPHS_VERSION_VERSION_Msk (0xffffu << UDPHS_VERSION_VERSION_Pos) /**< \brief (UDPHS_VERSION) Version of the Hardware Module */
#define UDPHS_VERSION_MFN_Pos 16
#define UDPHS_VERSION_MFN_Msk (0x7u << UDPHS_VERSION_MFN_Pos) /**< \brief (UDPHS_VERSION) Metal Fix Number */
/* -------- UDPHS_EPTCFG : (UDPHS Offset: N/A) UDPHS Endpoint Configuration Register -------- */
#define UDPHS_EPTCFG_EPT_SIZE_Pos 0
#define UDPHS_EPTCFG_EPT_SIZE_Msk (0x7u << UDPHS_EPTCFG_EPT_SIZE_Pos) /**< \brief (UDPHS_EPTCFG) Endpoint Size (cleared upon USB reset) */
#define UDPHS_EPTCFG_EPT_SIZE(value) ((UDPHS_EPTCFG_EPT_SIZE_Msk & ((value) << UDPHS_EPTCFG_EPT_SIZE_Pos)))
#define UDPHS_EPTCFG_EPT_SIZE_8 (0x0u << 0) /**< \brief (UDPHS_EPTCFG) 8 bytes */
#define UDPHS_EPTCFG_EPT_SIZE_16 (0x1u << 0) /**< \brief (UDPHS_EPTCFG) 16 bytes */
#define UDPHS_EPTCFG_EPT_SIZE_32 (0x2u << 0) /**< \brief (UDPHS_EPTCFG) 32 bytes */
#define UDPHS_EPTCFG_EPT_SIZE_64 (0x3u << 0) /**< \brief (UDPHS_EPTCFG) 64 bytes */
#define UDPHS_EPTCFG_EPT_SIZE_128 (0x4u << 0) /**< \brief (UDPHS_EPTCFG) 128 bytes */
#define UDPHS_EPTCFG_EPT_SIZE_256 (0x5u << 0) /**< \brief (UDPHS_EPTCFG) 256 bytes */
#define UDPHS_EPTCFG_EPT_SIZE_512 (0x6u << 0) /**< \brief (UDPHS_EPTCFG) 512 bytes */
#define UDPHS_EPTCFG_EPT_SIZE_1024 (0x7u << 0) /**< \brief (UDPHS_EPTCFG) 1024 bytes */
#define UDPHS_EPTCFG_EPT_DIR (0x1u << 3) /**< \brief (UDPHS_EPTCFG) Endpoint Direction (cleared upon USB reset) */
#define UDPHS_EPTCFG_EPT_TYPE_Pos 4
#define UDPHS_EPTCFG_EPT_TYPE_Msk (0x3u << UDPHS_EPTCFG_EPT_TYPE_Pos) /**< \brief (UDPHS_EPTCFG) Endpoint Type (cleared upon USB reset) */
#define UDPHS_EPTCFG_EPT_TYPE(value) ((UDPHS_EPTCFG_EPT_TYPE_Msk & ((value) << UDPHS_EPTCFG_EPT_TYPE_Pos)))
#define UDPHS_EPTCFG_EPT_TYPE_CTRL8 (0x0u << 4) /**< \brief (UDPHS_EPTCFG) Control endpoint */
#define UDPHS_EPTCFG_EPT_TYPE_ISO (0x1u << 4) /**< \brief (UDPHS_EPTCFG) Isochronous endpoint */
#define UDPHS_EPTCFG_EPT_TYPE_BULK (0x2u << 4) /**< \brief (UDPHS_EPTCFG) Bulk endpoint */
#define UDPHS_EPTCFG_EPT_TYPE_INT (0x3u << 4) /**< \brief (UDPHS_EPTCFG) Interrupt endpoint */
#define UDPHS_EPTCFG_BK_NUMBER_Pos 6
#define UDPHS_EPTCFG_BK_NUMBER_Msk (0x3u << UDPHS_EPTCFG_BK_NUMBER_Pos) /**< \brief (UDPHS_EPTCFG) Number of Banks (cleared upon USB reset) */
#define UDPHS_EPTCFG_BK_NUMBER(value) ((UDPHS_EPTCFG_BK_NUMBER_Msk & ((value) << UDPHS_EPTCFG_BK_NUMBER_Pos)))
#define UDPHS_EPTCFG_BK_NUMBER_0 (0x0u << 6) /**< \brief (UDPHS_EPTCFG) Zero bank, the endpoint is not mapped in memory */
#define UDPHS_EPTCFG_BK_NUMBER_1 (0x1u << 6) /**< \brief (UDPHS_EPTCFG) One bank (bank 0) */
#define UDPHS_EPTCFG_BK_NUMBER_2 (0x2u << 6) /**< \brief (UDPHS_EPTCFG) Double bank (Ping-Pong: bank0/bank1) */
#define UDPHS_EPTCFG_BK_NUMBER_3 (0x3u << 6) /**< \brief (UDPHS_EPTCFG) Triple bank (bank0/bank1/bank2) */
#define UDPHS_EPTCFG_NB_TRANS_Pos 8
#define UDPHS_EPTCFG_NB_TRANS_Msk (0x3u << UDPHS_EPTCFG_NB_TRANS_Pos) /**< \brief (UDPHS_EPTCFG) Number Of Transaction per Microframe (cleared upon USB reset) */
#define UDPHS_EPTCFG_NB_TRANS(value) ((UDPHS_EPTCFG_NB_TRANS_Msk & ((value) << UDPHS_EPTCFG_NB_TRANS_Pos)))
#define UDPHS_EPTCFG_EPT_MAPD (0x1u << 31) /**< \brief (UDPHS_EPTCFG) Endpoint Mapped (cleared upon USB reset) */
/* -------- UDPHS_EPTCTLENB : (UDPHS Offset: N/A) UDPHS Endpoint Control Enable Register -------- */
#define UDPHS_EPTCTLENB_EPT_ENABL (0x1u << 0) /**< \brief (UDPHS_EPTCTLENB) Endpoint Enable */
#define UDPHS_EPTCTLENB_AUTO_VALID (0x1u << 1) /**< \brief (UDPHS_EPTCTLENB) Packet Auto-Valid Enable */
#define UDPHS_EPTCTLENB_INTDIS_DMA (0x1u << 3) /**< \brief (UDPHS_EPTCTLENB) Interrupts Disable DMA */
#define UDPHS_EPTCTLENB_NYET_DIS (0x1u << 4) /**< \brief (UDPHS_EPTCTLENB) NYET Disable (Only for High Speed Bulk OUT endpoints) */
#define UDPHS_EPTCTLENB_ERR_OVFLW (0x1u << 8) /**< \brief (UDPHS_EPTCTLENB) Overflow Error Interrupt Enable */
#define UDPHS_EPTCTLENB_RXRDY_TXKL (0x1u << 9) /**< \brief (UDPHS_EPTCTLENB) Received OUT Data Interrupt Enable */
#define UDPHS_EPTCTLENB_TX_COMPLT (0x1u << 10) /**< \brief (UDPHS_EPTCTLENB) Transmitted IN Data Complete Interrupt Enable */
#define UDPHS_EPTCTLENB_TXRDY (0x1u << 11) /**< \brief (UDPHS_EPTCTLENB) TX Packet Ready Interrupt Enable */
#define UDPHS_EPTCTLENB_RX_SETUP (0x1u << 12) /**< \brief (UDPHS_EPTCTLENB) Received SETUP */
#define UDPHS_EPTCTLENB_STALL_SNT (0x1u << 13) /**< \brief (UDPHS_EPTCTLENB) Stall Sent Interrupt Enable */
#define UDPHS_EPTCTLENB_NAK_IN (0x1u << 14) /**< \brief (UDPHS_EPTCTLENB) NAKIN Interrupt Enable */
#define UDPHS_EPTCTLENB_NAK_OUT (0x1u << 15) /**< \brief (UDPHS_EPTCTLENB) NAKOUT Interrupt Enable */
#define UDPHS_EPTCTLENB_BUSY_BANK (0x1u << 18) /**< \brief (UDPHS_EPTCTLENB) Busy Bank Interrupt Enable */
#define UDPHS_EPTCTLENB_SHRT_PCKT (0x1u << 31) /**< \brief (UDPHS_EPTCTLENB) Short Packet Send/Short Packet Interrupt Enable */
#define UDPHS_EPTCTLENB_DATAX_RX (0x1u << 6) /**< \brief (UDPHS_EPTCTLENB) DATAx Interrupt Enable (Only for high bandwidth Isochronous OUT endpoints) */
#define UDPHS_EPTCTLENB_MDATA_RX (0x1u << 7) /**< \brief (UDPHS_EPTCTLENB) MDATA Interrupt Enable (Only for high bandwidth Isochronous OUT endpoints) */
#define UDPHS_EPTCTLENB_TXRDY_TRER (0x1u << 11) /**< \brief (UDPHS_EPTCTLENB) TX Packet Ready/Transaction Error Interrupt Enable */
#define UDPHS_EPTCTLENB_ERR_FL_ISO (0x1u << 12) /**< \brief (UDPHS_EPTCTLENB) Error Flow Interrupt Enable */
#define UDPHS_EPTCTLENB_ERR_CRC_NTR (0x1u << 13) /**< \brief (UDPHS_EPTCTLENB) ISO CRC Error/Number of Transaction Error Interrupt Enable */
#define UDPHS_EPTCTLENB_ERR_FLUSH (0x1u << 14) /**< \brief (UDPHS_EPTCTLENB) Bank Flush Error Interrupt Enable */
/* -------- UDPHS_EPTCTLDIS : (UDPHS Offset: N/A) UDPHS Endpoint Control Disable Register -------- */
#define UDPHS_EPTCTLDIS_EPT_DISABL (0x1u << 0) /**< \brief (UDPHS_EPTCTLDIS) Endpoint Disable */
#define UDPHS_EPTCTLDIS_AUTO_VALID (0x1u << 1) /**< \brief (UDPHS_EPTCTLDIS) Packet Auto-Valid Disable */
#define UDPHS_EPTCTLDIS_INTDIS_DMA (0x1u << 3) /**< \brief (UDPHS_EPTCTLDIS) Interrupts Disable DMA */
#define UDPHS_EPTCTLDIS_NYET_DIS (0x1u << 4) /**< \brief (UDPHS_EPTCTLDIS) NYET Enable (Only for High Speed Bulk OUT endpoints) */
#define UDPHS_EPTCTLDIS_ERR_OVFLW (0x1u << 8) /**< \brief (UDPHS_EPTCTLDIS) Overflow Error Interrupt Disable */
#define UDPHS_EPTCTLDIS_RXRDY_TXKL (0x1u << 9) /**< \brief (UDPHS_EPTCTLDIS) Received OUT Data Interrupt Disable */
#define UDPHS_EPTCTLDIS_TX_COMPLT (0x1u << 10) /**< \brief (UDPHS_EPTCTLDIS) Transmitted IN Data Complete Interrupt Disable */
#define UDPHS_EPTCTLDIS_TXRDY (0x1u << 11) /**< \brief (UDPHS_EPTCTLDIS) TX Packet Ready Interrupt Disable */
#define UDPHS_EPTCTLDIS_RX_SETUP (0x1u << 12) /**< \brief (UDPHS_EPTCTLDIS) Received SETUP Interrupt Disable */
#define UDPHS_EPTCTLDIS_STALL_SNT (0x1u << 13) /**< \brief (UDPHS_EPTCTLDIS) Stall Sent Interrupt Disable */
#define UDPHS_EPTCTLDIS_NAK_IN (0x1u << 14) /**< \brief (UDPHS_EPTCTLDIS) NAKIN Interrupt Disable */
#define UDPHS_EPTCTLDIS_NAK_OUT (0x1u << 15) /**< \brief (UDPHS_EPTCTLDIS) NAKOUT Interrupt Disable */
#define UDPHS_EPTCTLDIS_BUSY_BANK (0x1u << 18) /**< \brief (UDPHS_EPTCTLDIS) Busy Bank Interrupt Disable */
#define UDPHS_EPTCTLDIS_SHRT_PCKT (0x1u << 31) /**< \brief (UDPHS_EPTCTLDIS) Short Packet Interrupt Disable */
#define UDPHS_EPTCTLDIS_DATAX_RX (0x1u << 6) /**< \brief (UDPHS_EPTCTLDIS) DATAx Interrupt Disable (Only for High Bandwidth Isochronous OUT endpoints) */
#define UDPHS_EPTCTLDIS_MDATA_RX (0x1u << 7) /**< \brief (UDPHS_EPTCTLDIS) MDATA Interrupt Disable (Only for High Bandwidth Isochronous OUT endpoints) */
#define UDPHS_EPTCTLDIS_TXRDY_TRER (0x1u << 11) /**< \brief (UDPHS_EPTCTLDIS) TX Packet Ready/Transaction Error Interrupt Disable */
#define UDPHS_EPTCTLDIS_ERR_FL_ISO (0x1u << 12) /**< \brief (UDPHS_EPTCTLDIS) Error Flow Interrupt Disable */
#define UDPHS_EPTCTLDIS_ERR_CRC_NTR (0x1u << 13) /**< \brief (UDPHS_EPTCTLDIS) ISO CRC Error/Number of Transaction Error Interrupt Disable */
#define UDPHS_EPTCTLDIS_ERR_FLUSH (0x1u << 14) /**< \brief (UDPHS_EPTCTLDIS) bank flush error Interrupt Disable */
/* -------- UDPHS_EPTCTL : (UDPHS Offset: N/A) UDPHS Endpoint Control Register -------- */
#define UDPHS_EPTCTL_EPT_ENABL (0x1u << 0) /**< \brief (UDPHS_EPTCTL) Endpoint Enable (cleared upon USB reset) */
#define UDPHS_EPTCTL_AUTO_VALID (0x1u << 1) /**< \brief (UDPHS_EPTCTL) Packet Auto-Valid Enabled (Not for CONTROL Endpoints) (cleared upon USB reset) */
#define UDPHS_EPTCTL_INTDIS_DMA (0x1u << 3) /**< \brief (UDPHS_EPTCTL) Interrupt Disables DMA (cleared upon USB reset) */
#define UDPHS_EPTCTL_NYET_DIS (0x1u << 4) /**< \brief (UDPHS_EPTCTL) NYET Disable (Only for High Speed Bulk OUT Endpoints) (cleared upon USB reset) */
#define UDPHS_EPTCTL_ERR_OVFLW (0x1u << 8) /**< \brief (UDPHS_EPTCTL) Overflow Error Interrupt Enabled (cleared upon USB reset) */
#define UDPHS_EPTCTL_RXRDY_TXKL (0x1u << 9) /**< \brief (UDPHS_EPTCTL) Received OUT Data Interrupt Enabled (cleared upon USB reset) */
#define UDPHS_EPTCTL_TX_COMPLT (0x1u << 10) /**< \brief (UDPHS_EPTCTL) Transmitted IN Data Complete Interrupt Enabled (cleared upon USB reset) */
#define UDPHS_EPTCTL_TXRDY (0x1u << 11) /**< \brief (UDPHS_EPTCTL) TX Packet Ready Interrupt Enabled (cleared upon USB reset) */
#define UDPHS_EPTCTL_RX_SETUP (0x1u << 12) /**< \brief (UDPHS_EPTCTL) Received SETUP Interrupt Enabled (cleared upon USB reset) */
#define UDPHS_EPTCTL_STALL_SNT (0x1u << 13) /**< \brief (UDPHS_EPTCTL) Stall Sent Interrupt Enabled (cleared upon USB reset) */
#define UDPHS_EPTCTL_NAK_IN (0x1u << 14) /**< \brief (UDPHS_EPTCTL) NAKIN Interrupt Enabled (cleared upon USB reset) */
#define UDPHS_EPTCTL_NAK_OUT (0x1u << 15) /**< \brief (UDPHS_EPTCTL) NAKOUT Interrupt Enabled (cleared upon USB reset) */
#define UDPHS_EPTCTL_BUSY_BANK (0x1u << 18) /**< \brief (UDPHS_EPTCTL) Busy Bank Interrupt Enabled (cleared upon USB reset) */
#define UDPHS_EPTCTL_SHRT_PCKT (0x1u << 31) /**< \brief (UDPHS_EPTCTL) Short Packet Interrupt Enabled (cleared upon USB reset) */
#define UDPHS_EPTCTL_DATAX_RX (0x1u << 6) /**< \brief (UDPHS_EPTCTL) DATAx Interrupt Enabled (Only for High Bandwidth Isochronous OUT endpoints) (cleared upon USB reset) */
#define UDPHS_EPTCTL_MDATA_RX (0x1u << 7) /**< \brief (UDPHS_EPTCTL) MDATA Interrupt Enabled (Only for High Bandwidth Isochronous OUT endpoints) (cleared upon USB reset) */
#define UDPHS_EPTCTL_TXRDY_TRER (0x1u << 11) /**< \brief (UDPHS_EPTCTL) TX Packet Ready/Transaction Error Interrupt Enabled (cleared upon USB reset) */
#define UDPHS_EPTCTL_ERR_FL_ISO (0x1u << 12) /**< \brief (UDPHS_EPTCTL) Error Flow Interrupt Enabled (cleared upon USB reset) */
#define UDPHS_EPTCTL_ERR_CRC_NTR (0x1u << 13) /**< \brief (UDPHS_EPTCTL) ISO CRC Error/Number of Transaction Error Interrupt Enabled (cleared upon USB reset) */
#define UDPHS_EPTCTL_ERR_FLUSH (0x1u << 14) /**< \brief (UDPHS_EPTCTL) Bank Flush Error Interrupt Enabled (cleared upon USB reset) */
/* -------- UDPHS_EPTSETSTA : (UDPHS Offset: N/A) UDPHS Endpoint Set Status Register -------- */
#define UDPHS_EPTSETSTA_FRCESTALL (0x1u << 5) /**< \brief (UDPHS_EPTSETSTA) Stall Handshake Request Set */
#define UDPHS_EPTSETSTA_RXRDY_TXKL (0x1u << 9) /**< \brief (UDPHS_EPTSETSTA) KILL Bank Set (for IN Endpoint) */
#define UDPHS_EPTSETSTA_TXRDY (0x1u << 11) /**< \brief (UDPHS_EPTSETSTA) TX Packet Ready Set */
#define UDPHS_EPTSETSTA_TXRDY_TRER (0x1u << 11) /**< \brief (UDPHS_EPTSETSTA) TX Packet Ready Set */
/* -------- UDPHS_EPTCLRSTA : (UDPHS Offset: N/A) UDPHS Endpoint Clear Status Register -------- */
#define UDPHS_EPTCLRSTA_FRCESTALL (0x1u << 5) /**< \brief (UDPHS_EPTCLRSTA) Stall Handshake Request Clear */
#define UDPHS_EPTCLRSTA_TOGGLESQ (0x1u << 6) /**< \brief (UDPHS_EPTCLRSTA) Data Toggle Clear */
#define UDPHS_EPTCLRSTA_RXRDY_TXKL (0x1u << 9) /**< \brief (UDPHS_EPTCLRSTA) Received OUT Data Clear */
#define UDPHS_EPTCLRSTA_TX_COMPLT (0x1u << 10) /**< \brief (UDPHS_EPTCLRSTA) Transmitted IN Data Complete Clear */
#define UDPHS_EPTCLRSTA_RX_SETUP (0x1u << 12) /**< \brief (UDPHS_EPTCLRSTA) Received SETUP Clear */
#define UDPHS_EPTCLRSTA_STALL_SNT (0x1u << 13) /**< \brief (UDPHS_EPTCLRSTA) Stall Sent Clear */
#define UDPHS_EPTCLRSTA_NAK_IN (0x1u << 14) /**< \brief (UDPHS_EPTCLRSTA) NAKIN Clear */
#define UDPHS_EPTCLRSTA_NAK_OUT (0x1u << 15) /**< \brief (UDPHS_EPTCLRSTA) NAKOUT Clear */
#define UDPHS_EPTCLRSTA_ERR_FL_ISO (0x1u << 12) /**< \brief (UDPHS_EPTCLRSTA) Error Flow Clear */
#define UDPHS_EPTCLRSTA_ERR_CRC_NTR (0x1u << 13) /**< \brief (UDPHS_EPTCLRSTA) Number of Transaction Error Clear */
#define UDPHS_EPTCLRSTA_ERR_FLUSH (0x1u << 14) /**< \brief (UDPHS_EPTCLRSTA) Bank Flush Error Clear */
/* -------- UDPHS_EPTSTA : (UDPHS Offset: N/A) UDPHS Endpoint Status Register -------- */
#define UDPHS_EPTSTA_FRCESTALL (0x1u << 5) /**< \brief (UDPHS_EPTSTA) Stall Handshake Request (cleared upon USB reset) */
#define UDPHS_EPTSTA_TOGGLESQ_STA_Pos 6
#define UDPHS_EPTSTA_TOGGLESQ_STA_Msk (0x3u << UDPHS_EPTSTA_TOGGLESQ_STA_Pos) /**< \brief (UDPHS_EPTSTA) Toggle Sequencing (cleared upon USB reset) */
#define UDPHS_EPTSTA_TOGGLESQ_STA_DATA0 (0x0u << 6) /**< \brief (UDPHS_EPTSTA) DATA0 */
#define UDPHS_EPTSTA_TOGGLESQ_STA_DATA1 (0x1u << 6) /**< \brief (UDPHS_EPTSTA) DATA1 */
#define UDPHS_EPTSTA_TOGGLESQ_STA_DATA2 (0x2u << 6) /**< \brief (UDPHS_EPTSTA) Reserved for High Bandwidth Isochronous Endpoint */
#define UDPHS_EPTSTA_TOGGLESQ_STA_MDATA (0x3u << 6) /**< \brief (UDPHS_EPTSTA) Reserved for High Bandwidth Isochronous Endpoint */
#define UDPHS_EPTSTA_ERR_OVFLW (0x1u << 8) /**< \brief (UDPHS_EPTSTA) Overflow Error (cleared upon USB reset) */
#define UDPHS_EPTSTA_RXRDY_TXKL (0x1u << 9) /**< \brief (UDPHS_EPTSTA) Received OUT Data/KILL Bank (cleared upon USB reset) */
#define UDPHS_EPTSTA_TX_COMPLT (0x1u << 10) /**< \brief (UDPHS_EPTSTA) Transmitted IN Data Complete (cleared upon USB reset) */
#define UDPHS_EPTSTA_TXRDY (0x1u << 11) /**< \brief (UDPHS_EPTSTA) TX Packet Ready (cleared upon USB reset) */
#define UDPHS_EPTSTA_RX_SETUP (0x1u << 12) /**< \brief (UDPHS_EPTSTA) Received SETUP (cleared upon USB reset) */
#define UDPHS_EPTSTA_STALL_SNT (0x1u << 13) /**< \brief (UDPHS_EPTSTA) Stall Sent (cleared upon USB reset) */
#define UDPHS_EPTSTA_NAK_IN (0x1u << 14) /**< \brief (UDPHS_EPTSTA) NAK IN (cleared upon USB reset) */
#define UDPHS_EPTSTA_NAK_OUT (0x1u << 15) /**< \brief (UDPHS_EPTSTA) NAK OUT (cleared upon USB reset) */
#define UDPHS_EPTSTA_CURBK_CTLDIR_Pos 16
#define UDPHS_EPTSTA_CURBK_CTLDIR_Msk (0x3u << UDPHS_EPTSTA_CURBK_CTLDIR_Pos) /**< \brief (UDPHS_EPTSTA) Current Bank/Control Direction (cleared upon USB reset) */
#define UDPHS_EPTSTA_BUSY_BANK_STA_Pos 18
#define UDPHS_EPTSTA_BUSY_BANK_STA_Msk (0x3u << UDPHS_EPTSTA_BUSY_BANK_STA_Pos) /**< \brief (UDPHS_EPTSTA) Busy Bank Number (cleared upon USB reset) */
#define UDPHS_EPTSTA_BUSY_BANK_STA_0BUSYBANK (0x0u << 18) /**< \brief (UDPHS_EPTSTA) All banks are free */
#define UDPHS_EPTSTA_BUSY_BANK_STA_1BUSYBANK (0x1u << 18) /**< \brief (UDPHS_EPTSTA) 1 busy bank */
#define UDPHS_EPTSTA_BUSY_BANK_STA_2BUSYBANKS (0x2u << 18) /**< \brief (UDPHS_EPTSTA) 2 busy banks */
#define UDPHS_EPTSTA_BUSY_BANK_STA_3BUSYBANKS (0x3u << 18) /**< \brief (UDPHS_EPTSTA) 3 busy banks */
#define UDPHS_EPTSTA_BYTE_COUNT_Pos 20
#define UDPHS_EPTSTA_BYTE_COUNT_Msk (0x7ffu << UDPHS_EPTSTA_BYTE_COUNT_Pos) /**< \brief (UDPHS_EPTSTA) UDPHS Byte Count (cleared upon USB reset) */
#define UDPHS_EPTSTA_SHRT_PCKT (0x1u << 31) /**< \brief (UDPHS_EPTSTA) Short Packet (cleared upon USB reset) */
#define UDPHS_EPTSTA_TXRDY_TRER (0x1u << 11) /**< \brief (UDPHS_EPTSTA) TX Packet Ready/Transaction Error (cleared upon USB reset) */
#define UDPHS_EPTSTA_ERR_FL_ISO (0x1u << 12) /**< \brief (UDPHS_EPTSTA) Error Flow (cleared upon USB reset) */
#define UDPHS_EPTSTA_ERR_CRC_NTR (0x1u << 13) /**< \brief (UDPHS_EPTSTA) CRC ISO Error/Number of Transaction Error (cleared upon USB reset) */
#define UDPHS_EPTSTA_ERR_FLUSH (0x1u << 14) /**< \brief (UDPHS_EPTSTA) Bank Flush Error (cleared upon USB reset) */
#define UDPHS_EPTSTA_CURBK_Pos 16
#define UDPHS_EPTSTA_CURBK_Msk (0x3u << UDPHS_EPTSTA_CURBK_Pos) /**< \brief (UDPHS_EPTSTA) Current Bank (cleared upon USB reset) */
#define UDPHS_EPTSTA_CURBK_BANK0 (0x0u << 16) /**< \brief (UDPHS_EPTSTA) Bank 0 (or single bank) */
#define UDPHS_EPTSTA_CURBK_BANK1 (0x1u << 16) /**< \brief (UDPHS_EPTSTA) Bank 1 */
#define UDPHS_EPTSTA_CURBK_BANK2 (0x2u << 16) /**< \brief (UDPHS_EPTSTA) Bank 2 */
/* -------- UDPHS_DMANXTDSC : (UDPHS Offset: N/A) UDPHS DMA Next Descriptor Address Register -------- */
#define UDPHS_DMANXTDSC_NXT_DSC_ADD_Pos 0
#define UDPHS_DMANXTDSC_NXT_DSC_ADD_Msk (0xffffffffu << UDPHS_DMANXTDSC_NXT_DSC_ADD_Pos) /**< \brief (UDPHS_DMANXTDSC) Next Descriptor Address */
#define UDPHS_DMANXTDSC_NXT_DSC_ADD(value) ((UDPHS_DMANXTDSC_NXT_DSC_ADD_Msk & ((value) << UDPHS_DMANXTDSC_NXT_DSC_ADD_Pos)))
/* -------- UDPHS_DMAADDRESS : (UDPHS Offset: N/A) UDPHS DMA Channel Address Register -------- */
#define UDPHS_DMAADDRESS_BUFF_ADD_Pos 0
#define UDPHS_DMAADDRESS_BUFF_ADD_Msk (0xffffffffu << UDPHS_DMAADDRESS_BUFF_ADD_Pos) /**< \brief (UDPHS_DMAADDRESS) Buffer Address */
#define UDPHS_DMAADDRESS_BUFF_ADD(value) ((UDPHS_DMAADDRESS_BUFF_ADD_Msk & ((value) << UDPHS_DMAADDRESS_BUFF_ADD_Pos)))
/* -------- UDPHS_DMACONTROL : (UDPHS Offset: N/A) UDPHS DMA Channel Control Register -------- */
#define UDPHS_DMACONTROL_CHANN_ENB (0x1u << 0) /**< \brief (UDPHS_DMACONTROL) (Channel Enable Command) */
#define UDPHS_DMACONTROL_LDNXT_DSC (0x1u << 1) /**< \brief (UDPHS_DMACONTROL) Load Next Channel Transfer Descriptor Enable (Command) */
#define UDPHS_DMACONTROL_END_TR_EN (0x1u << 2) /**< \brief (UDPHS_DMACONTROL) End of Transfer Enable (Control) */
#define UDPHS_DMACONTROL_END_B_EN (0x1u << 3) /**< \brief (UDPHS_DMACONTROL) End of Buffer Enable (Control) */
#define UDPHS_DMACONTROL_END_TR_IT (0x1u << 4) /**< \brief (UDPHS_DMACONTROL) End of Transfer Interrupt Enable */
#define UDPHS_DMACONTROL_END_BUFFIT (0x1u << 5) /**< \brief (UDPHS_DMACONTROL) End of Buffer Interrupt Enable */
#define UDPHS_DMACONTROL_DESC_LD_IT (0x1u << 6) /**< \brief (UDPHS_DMACONTROL) Descriptor Loaded Interrupt Enable */
#define UDPHS_DMACONTROL_BURST_LCK (0x1u << 7) /**< \brief (UDPHS_DMACONTROL) Burst Lock Enable */
#define UDPHS_DMACONTROL_BUFF_LENGTH_Pos 16
#define UDPHS_DMACONTROL_BUFF_LENGTH_Msk (0xffffu << UDPHS_DMACONTROL_BUFF_LENGTH_Pos) /**< \brief (UDPHS_DMACONTROL) Buffer Byte Length (Write-only) */
#define UDPHS_DMACONTROL_BUFF_LENGTH(value) ((UDPHS_DMACONTROL_BUFF_LENGTH_Msk & ((value) << UDPHS_DMACONTROL_BUFF_LENGTH_Pos)))
/* -------- UDPHS_DMASTATUS : (UDPHS Offset: N/A) UDPHS DMA Channel Status Register -------- */
#define UDPHS_DMASTATUS_CHANN_ENB (0x1u << 0) /**< \brief (UDPHS_DMASTATUS) Channel Enable Status */
#define UDPHS_DMASTATUS_CHANN_ACT (0x1u << 1) /**< \brief (UDPHS_DMASTATUS) Channel Active Status */
#define UDPHS_DMASTATUS_END_TR_ST (0x1u << 4) /**< \brief (UDPHS_DMASTATUS) End of Channel Transfer Status */
#define UDPHS_DMASTATUS_END_BF_ST (0x1u << 5) /**< \brief (UDPHS_DMASTATUS) End of Channel Buffer Status */
#define UDPHS_DMASTATUS_DESC_LDST (0x1u << 6) /**< \brief (UDPHS_DMASTATUS) Descriptor Loaded Status */
#define UDPHS_DMASTATUS_BUFF_COUNT_Pos 16
#define UDPHS_DMASTATUS_BUFF_COUNT_Msk (0xffffu << UDPHS_DMASTATUS_BUFF_COUNT_Pos) /**< \brief (UDPHS_DMASTATUS) Buffer Byte Count */
#define UDPHS_DMASTATUS_BUFF_COUNT(value) ((UDPHS_DMASTATUS_BUFF_COUNT_Msk & ((value) << UDPHS_DMASTATUS_BUFF_COUNT_Pos)))
/*@}*/
#endif /* _SAMA5D2_UDPHS_COMPONENT_ */
|
