diff options
author | fauxpark <fauxpark@gmail.com> | 2019-08-09 06:12:12 +1000 |
---|---|---|
committer | Drashna Jaelre <drashna@live.com> | 2019-08-08 13:12:12 -0700 |
commit | 4d72aa428fb8dc72634bded428f78ffba2284fdc (patch) | |
tree | 4ff5ead1218accfb7650e79ec60697fb0ac22a2a /docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md | |
parent | 57540af102d034396c9f41a5a6e69ead8b10ba99 (diff) | |
download | firmware-4d72aa428fb8dc72634bded428f78ffba2284fdc.tar.gz firmware-4d72aa428fb8dc72634bded428f78ffba2284fdc.tar.bz2 firmware-4d72aa428fb8dc72634bded428f78ffba2284fdc.zip |
Improve backlight PWM pin support (#6202)
* Improve backlight PWM pin support
* I accidentally an equals sign
* Another typo
* Order by pin number
* Throw an error if backlight pin is C4 or C5 on 16/32U4
* Use else for clarity
* Minor alignment adjustments
Diffstat (limited to 'docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md')
-rw-r--r-- | docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md b/docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md index 979eafbc8..bce9f9dc9 100644 --- a/docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md +++ b/docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md @@ -34,7 +34,7 @@ For the `DIODE_DIRECTION`, most hand-wiring guides will instruct you to wire the To configure a keyboard where each switch is connected to a separate pin and ground instead of sharing row and column pins, use `DIRECT_PINS`. The mapping defines the pins of each switch in rows and columns, from left to right. Must conform to the sizes within `MATRIX_ROWS` and `MATRIX_COLS`, use `NO_PIN` to fill in blank spaces. Overrides the behaviour of `DIODE_DIRECTION`, `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`. -`BACKLIGHT_PIN` is the pin that your PWM-controlled backlight (if one exists) is hooked-up to. Currently only B5, B6, and B7 are supported. +`BACKLIGHT_PIN` is the pin that your PWM-controlled backlight (if one exists) is hooked-up to. `BACKLIGHT_BREATHING` is a fancier backlight feature that adds breathing/pulsing/fading effects to the backlight. It uses the same timer as the normal backlight. These breathing effects must be called by code in your keymap. |